Skip to Content

Wiki source code of Siemens

Version 26.1 by Theodore Xu on 2023/08/28 10:06
Hide last authors
Theodore Xu 26.1 1 = **Siemens ** =
Leo Wei 2.1 2
Theodore Xu 16.1 3 == **S7-200 Smart Serial** ==
4
Theodore Xu 26.1 5 **1）Address List **
Theodore Xu 20.1 6
Theodore Xu 26.1 7 |**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
8 |(% rowspan="9" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
9 |Q|Q|Q ddddd.o|0.0~~99999.7|
10 |V|VWbit|VWbit ddddd.o|0.0~~99999.7|
11 |V|V|V ddddd.o|0.0~~99999.7|
12 |M|M|M ddddd.o|0.0~~99999.7|
13 |SM|SM|ddddd.o|0.0~~99999.7|
14 |S|S|ddddd.o|0.0~~99999.7|Read only
15 |T|T|ddddd|0~~99999|Timer state, read only
16 |C|C|ddddd|0~~99999|Counter state, read only
17 |(% rowspan="12" %)Word|I|IW|IW ddddd|0~~99999|
18 |Q|QW|QW ddddd|0~~99999|
19 |AI|AIW|AIW ddddd|0~~99999|
20 |AQ|VB|VB ddddd|0~~99999|
21 |V|VW|VW ddddd|0~~99998|(((
22 VW0=VB (0~~1)
23
24 VW2=VB (2~~3)
25
26 Address value is a multiple of 2
27 )))
28 |V|VD|VD ddddd|0~~99998|(((
29 VD0=VB (0~~3)
30
31 VD2=VB (4~~7)
32
33 Address value is a multiple of 4
34 )))
35 |M|MB|MB ddddd|0~~99999|
36 |M|MW|MW ddddd|0~~99999|(((
37 MW0=MB(0~~1)
38
39 MW2=MB(2~~3)
40
41 Address value is a multiple of 2
42 )))
43 |M|MD|MD ddddd|0~~99999|(((
44 MD0=MB(0~~3)
45
46 MD4=MB(4~~7)
47
48 Address value is a multiple of 4
49 )))
50 |T|TW|TW ddddd|0~~99999|Value of timer
51 |C|CW|CW ddddd|0~~99999|Value of counter
52 |W|SW|SW ddddd|0~~99999|
53
54 **2）V-BOX Protocol：Siemens S7-200 CPU22x/Smart PPI**
55
Theodore Xu 20.1 56 (% style="text-align:center" %)
57 [[image:西门子200串口.png]]
58
Theodore Xu 26.1 59 **3）PLC software**
Theodore Xu 20.1 60
61 (% style="text-align:center" %)
62 [[image:西门子软件版本.png]]
63
Theodore Xu 26.1 64 **4）PLC Software Configuration**
Theodore Xu 20.1 65
66 (% style="text-align:center" %)
67 [[image:485通讯配置.png]]
68
Theodore Xu 26.1 69 **5）Connect and Download**
Theodore Xu 20.1 70
71 (% style="text-align:center" %)
72 [[image:以太网 PC和PLC连接.png]]
73
74 (% style="text-align:center" %)
75 [[image:以太网下载.png]]
76
Theodore Xu 26.1 77 **6）wiring**
Theodore Xu 20.1 78
79 (% style="text-align:center" %)
80 [[image:485接线.png]]
81
Theodore Xu 14.1 82 == **S7-200 Smart Ethernet ** ==
Leo Wei 2.1 83
Theodore Xu 17.1 84 (% class="wikigeneratedid" id="H1FF09V-BOX" %)
Theodore Xu 22.1 85 **1）V-BOX Protocol：Siemens S7-200 Smart（Ethernet）**
Theodore Xu 16.1 86
87 (% style="text-align:center" %)
88 [[image:西门子200smart 以太网.png]]
89
Theodore Xu 18.1 90 **2）PLC software**
Theodore Xu 14.1 91
92 (% style="text-align:center" %)
93 [[image:西门子软件版本.png]]
94
Theodore Xu 19.1 95 **3）PLC Software Configuration**
Theodore Xu 14.1 96
97 (% style="text-align:center" %)
98 [[image:以太网通讯配置.png]]
99
Theodore Xu 25.1 100 **4）Connect and Download**
Theodore Xu 14.1 101
102 (% style="text-align:center" %)
Theodore Xu 19.1 103 [[image:以太网 PC和PLC连接.png]]
104
105
106 (% style="text-align:center" %)
Theodore Xu 14.1 107 [[image:以太网下载.png]]
108
Theodore Xu 15.1 109 **5）wiring**
110
111 V-Box : RJ45 Ethernet interface
112
113 PLC : RJ45 Ethernet interface
114
115 (% style="text-align:center" %)
116 [[image:以太网连接.png]]
117
Leo Wei 2.1 118 == {{id name="HS7-300Ethernet"/}}**S7-300 Ethernet ** ==
119
120 Supported Series: Siemens S7-300 series PLC
121
122 **1）V-BOX setting**
123
124 |**Items**|**Settings**|**Note**
125 |Protocol|Simens S7-300 Ethernet|
126 |Connection|Ethernet|
127 |Port No.|102|
128 |PLC station No.|2|Need to be same as the PLC setting
129
130 **2）Address List**
131
132 |**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
133 |(% rowspan="4" %)Bit|I|I|I ddddd.o|0.0~~99999.7|
134 |Q|Q|Q ddddd.o|0.0~~99999.7|
135 |M|M|M ddddd.o|0.0~~99999.7|
136 |DB0.DB~~DB99.DB|DBxDBD|DBxDB nndddd.o|0.0~~99999999.7|(((
137 nn: block number;
138
139 dddd: address;
140 )))
141 |(% rowspan="8" %)Word|I|IW|IW ddddd|0~~99999|
142 |Q|QW|QW ddddd|0~~99999|
143 |(% rowspan="3" %)M|MB|MB ddddd|0~~99999|
144 |MW|MW ddddd|0~~99999|(((
145 MW0=MB(0~~1)
146
147 MW2=MB(2~~3)
148
149 Address value is a multiple of 2
150 )))
151 |MD|MD ddddd|0~~99999|(((
152 MD0=MB(0~~3)
153
154 MD4=MB(4~~7)
155
156 Address value is a multiple of 4
157 )))
158 |(% rowspan="3" %)DB0.DB~~DB99.DB|DBxDBB|DBxDBB nndddd|0~~99999999|(% rowspan="3" %)(((
159 nn: block number;
160
161 dddd: address
162 )))
163 |DBxDBW|DBxDBW nndddd|0~~99999999
164 |DBxDBD|DBxDBD nndddd|0~~99999999
165
166 **3）Configure the communication protocol**
167
168 {{id name="Iimage-20220824161345-1.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png||alt="image-20220824161345-1.png" height="1011" width="1920"]]
169
170 **4）Cable Wiring**
171
172 {{id name="Iimage-20220824161450-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824161450-2.png" height="170" width="401"]]
173
174 == {{id name="HS7-1200A0Ethernet"/}}**S7-1200 Ethernet ** ==
175
176 [[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
177
Leo Wei 25.2 178 == **S7-XXX Ethernet** ==
Leo Wei 2.1 179
180 Supported Series: Siemens S7-400, S7-1200 and S7-1500
181
182 **1）V-BOX setting**
183
184 |=**Items**|=**Settings**|=**Note**
185 |Protocol|Siemens S7-XXX|
186 |Connection|Ethernet|
187 |Port No.|102|
188 |Device No.|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)|
189 |HMI No.|Rack (Default as 0)|
190
191 Slot from TIA Portal is equal to Device No. of V-net
192
193 Rack from TIA Portal is equal to HMI No. of V-net
194
195 {{id name="Iimage-20220824162459-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png||alt="image-20220824162459-3.png" height="503" width="798"]]
196
197 {{id name="Iimage-20220824163305-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png||alt="image-20220824163305-2.png" height="1009" width="1920"]]
198
199 **2）Address List**
200
201 |**Type**|**Device register**|**HMI register**|**Format**|**Range**|**Note**
202 |(% rowspan="4" %)Bit|I|I|M d.o|(((
203 d:0~-~-9999
204
205 o:0-7
206 )))|
207 |Q|Q|Q d.o|(((
208 d:0~-~-9999
209
210 o:0-7
211 )))|
212 |M|M|M d.o|(((
213 d:0~-~-9999
214
215 o:0-7
216 )))|
217 |DB0.DB-DB99.DB|DBxDB|DBxDBnndddd.o|(((
218 nn:0-9999,
219
220 dddd:0-9999,
221
222 o:0-7
223 )))|(((
224 nn:DB No.
225
226 dddd:address value
227
228 o: digit address
229 )))
230 |(% rowspan="8" %)Word|M|MB|MB d|d:0-99999|
231 |M|MW|MW d|d:0-99999|(((
232 MW0=MB(0~~1)
233
234 MW2=MB(2~~3)
235
236 Address value is a multiple of 2
237 )))
238 |M|MD|MD d|d:0-99999|(((
239 MD0=MB(0~~3)
240
241 MD4=MB(4~~7)
242
243 Address value is a multiple of 4
244 )))
245 |I|IW|IW d|d:0-99999|
246 |Q|QW|QW d|d:0-99999|
247 |DB0.DB-DB99.DB|DBxDBB|DBxDBBnndddd|(((
248 nn:0-9999
249
250 dddd:0-9999
251 )))|(((
252 nn:DB No.
253
254 dddd:address value
255 )))
256 |DB0.DB-DB99.DB|DBxDBW|DBxDBWnndddd|(((
257 nn:0-9999
258
259 dddd:0-9999
260 )))|(((
261 nn:DB No.
262
263 dddd:address value
264
265 Address value is a multiple of 2
266 )))
267 |DB0.DB-DB99.DB|DBxDBD|DBxDBDnndddd|(((
268 nn:0-9999
269
270 dddd:0-9999
271 )))|(((
272 nn:DB No.
273
274 dddd:address value
275
276 Address value is a multiple of 4
277 )))
278
279 **3）Configure the communication protocol**
280
281 {{id name="Iimage-20220824163448-3.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png||alt="image-20220824163448-3.png" height="557" width="974"]]
282
283 **✎Note:**
284
285 * The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three V-BOX.
286 * V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
287
288 **4）Cable Wiring**
289
290 {{id name="Iimage-20220824162342-2.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png||alt="image-20220824162342-2.png" height="170" width="401"]]
291
292 == {{id name="HLOGOEthernet"/}}**LOGO Ethernet ** ==
293
294 Supported Series: Siemens Logo 0BA0, 0BA1 series
295
296 **V-BOX Settings**
297
298 |**Items**|**Settings**|**Note**
299 |Protocol|Siemens LOGO|
300 |Connection|Ethernet|
301 |Port No.|102|
302 |PLC station No.|2|
303
304 **Address List**
305
306 |**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
307 |1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
308 |2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
309 |3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
310 |4|VW|Word|0-1468|DB1.DBX0.0|0x000000
311 |5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
312 |6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
313 |7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
314 |8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
315 |9|AI|Word|1-16|DB1.DBX1032.0|0x002040
316 |10|I|Bit|1-64|DB1.DBX1024.0|0x002000
317 |11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
318 |12|M|Bit|1-112|DB1.DBX1104.0|0x002280
319 |13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
320 |14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
321 |15|V|Bit|0-14697|DB1.DBX0.0|0x000000
322
323 **PLC Settings in LOGO Software:**
324
325 Click [Tools]~-~-[Ethernet Connections],shown as below.
326
327 {{id name="IPIStudio.125C.PLCprotocols.WebHome4012.PLCProtocol_html_8b9d2322edf89519.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png||alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
328
329 Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
330
331 {{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228142937-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png||alt="image-20221228142937-4.png" height="484" width="366"]]
332
333 **TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
334
335 {{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143047-5.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png||alt="image-20221228143047-5.png" height="626" width="1088"]]
336
337 **Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
338
339 {{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143246-6.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png||alt="image-20221228143246-6.png" height="698" width="688"]]
340
341 **V-BOX Communication Settings**
342
343 Set PLC IP in [IP Address] settings;
344
345 {{id name="ILldwDGntf4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ab570912d299c09.png||alt="LldwDGntf4.png" height="530" width="899"]]
346
347 Enable V-BOX Ethernet in [Network];
348
349 {{id name="IWgvjfWbQif.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_637860db3ca1ca1b.png||alt="WgvjfWbQif.png" height="654" width="1195"]]
350
351 TSAP setting
352
353 * The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
354
355 **function** **init**.main()
356 addr_setword("@W_0#HSW1200",8192) //~-~- Set the source TSAP address//
357 addr_setword("@W_0#HSW1201",4096) //~-~- Set the destination TSAP address//
Theodore Xu 17.1 358 **end**
Leo Wei 2.1 359
360 Note: The name of the test script is init, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
361
362 **✎Note:**
363
364 * **Communication port configuration: **
365 ** Continuous length needs to be set to 0.
366 ** Integration interval needs to be set to 1. (no change may result in data errors)
367 ** Set Port and Device Station NO.
368 ** Other set as defaulted.
369 * **Notes on the use of registers:**
370 ** Register VD: Use only registers that are multiples of 4, such as 0, 4, 8, etc.
371 ** Register VW: Use only registers thay are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )