Wiki source code of Siemens

Version 45.1 by Theodore Xu on 2023/10/12 16:37

version	line-number	content
16.1	1	== S7-200 Smart Serial ==
	2
31.1	3	V-BOX setting
27.1	4
33.1	5	(% style="width:1323.87px" %)
37.1	6	\|Items\|Settings\|Note
	7	\|Protocol\|(% style="width:783px" %)Siemens S7-200 CPU22x/Smart PPI\|
	8	\|Connection\|(% style="width:783px" %)RS485\|
	9	\|Baud rate\|(% style="width:783px" %)9600\|
	10	\|Data bit\|(% style="width:783px" %)8\|
	11	\|Parity\|(% style="width:783px" %)EVEN\|
	12	\|Stop bit\|(% style="width:783px" %)1\|
	13	\|PLC station No.\|(% style="width:783px" %)2\|
27.1	14
	15	(% style="text-align:center" %)
	16	[[image:西门子200串口.png]]
	17
31.1	18	Address List
27.1	19
39.1	20	\|Type\|Device register\|Format\|Range\|Note
	21	\|(% rowspan="9" %)Bit\|I\|I ddddd.o\|0.0~~99999.7\|
	22	\|Q\|Q ddddd.o\|0.0~~99999.7\|
	23	\|V\|VWbit ddddd.o\|0.0~~99999.7\|
	24	\|V\|V ddddd.o\|0.0~~99999.7\|
	25	\|M\|M ddddd.o\|0.0~~99999.7\|
	26	\|SM\|ddddd.o\|0.0~~99999.7\|
	27	\|S\|ddddd.o\|0.0~~99999.7\|Read only
	28	\|T\|ddddd\|0~~99999\|Timer state, read only
	29	\|C\|ddddd\|0~~99999\|Counter state, read only
	30	\|(% rowspan="12" %)Word\|I\|IW ddddd\|0~~99999\|
	31	\|Q\|QW ddddd\|0~~99999\|
	32	\|AI\|AIW ddddd\|0~~99999\|
	33	\|AQ\|VB ddddd\|0~~99999\|
	34	\|V\|VW ddddd\|0~~99998\|(((
26.1	35	VW0=VB (0~~1)
	36
	37	VW2=VB (2~~3)
	38
	39	Address value is a multiple of 2
	40	)))
39.1	41	\|V\|VD ddddd\|0~~99998\|(((
26.1	42	VD0=VB (0~~3)
	43
	44	VD2=VB (4~~7)
	45
	46	Address value is a multiple of 4
	47	)))
39.1	48	\|M\|MB ddddd\|0~~99999\|
	49	\|M\|MW ddddd\|0~~99999\|(((
26.1	50	MW0=MB(0~~1)
	51
	52	MW2=MB(2~~3)
	53
	54	Address value is a multiple of 2
	55	)))
39.1	56	\|M\|MD ddddd\|0~~99999\|(((
26.1	57	MD0=MB(0~~3)
	58
	59	MD4=MB(4~~7)
	60
	61	Address value is a multiple of 4
	62	)))
39.1	63	\|T\|TW ddddd\|0~~99999\|Value of timer
	64	\|C\|CW ddddd\|0~~99999\|Value of counter
	65	\|W\|SW ddddd\|0~~99999\|
26.1	66
31.1	67	PLC setting
20.1	68
	69	(% style="text-align:center" %)
	70	[[image:西门子软件版本.png]]
	71
	72	(% style="text-align:center" %)
	73	[[image:485通讯配置.png]]
	74
31.1	75	Connect and Download
20.1	76
	77	(% style="text-align:center" %)
	78	[[image:以太网 PC和PLC连接.png]]
	79
	80	(% style="text-align:center" %)
	81	[[image:以太网下载.png]]
	82
31.1	83	Cable Wiring
20.1	84
	85	(% style="text-align:center" %)
	86	[[image:485接线.png]]
	87
14.1	88	== S7-200 Smart Ethernet ==
2.1	89
32.1	90	V-BOX setting
16.1	91
34.1	92	\|Items\|Settings
	93	\|Protocol\|Siemens S7-200 Smart（Ethernet）
	94	\|Connection\|Ethernet
	95	\|Port No.\|102
	96	\|PLC station No.\|2
29.1	97
16.1	98	(% style="text-align:center" %)
	99	[[image:西门子200smart 以太网.png]]
	100
32.1	101	PLC setting
14.1	102
	103	(% style="text-align:center" %)
	104	[[image:西门子软件版本.png]]
	105
	106	(% style="text-align:center" %)
	107	[[image:以太网通讯配置.png]]
	108
32.1	109	Connect and Download
14.1	110
	111	(% style="text-align:center" %)
19.1	112	[[image:以太网 PC和PLC连接.png]]
	113
	114	(% style="text-align:center" %)
14.1	115	[[image:以太网下载.png]]
	116
32.1	117	Cable Wiring
15.1	118
	119	V-Box : RJ45 Ethernet interface
	120
	121	PLC : RJ45 Ethernet interface
	122
	123	(% style="text-align:center" %)
	124	[[image:以太网连接.png]]
	125
41.1	126	== S7-300 Ethernet ==
2.1	127
	128	Supported Series: Siemens S7-300 series PLC
	129
41.1	130	V-BOX setting
2.1	131
	132	\|Items\|Settings\|Note
	133	\|Protocol\|Simens S7-300 Ethernet\|
	134	\|Connection\|Ethernet\|
	135	\|Port No.\|102\|
	136	\|PLC station No.\|2\|Need to be same as the PLC setting
	137
41.1	138	Address List
2.1	139
40.1	140	\|Type\|Device register\|Format\|Range\|Note
	141	\|(% rowspan="4" %)Bit\|I\|I ddddd.o\|0.0~~99999.7\|
	142	\|Q\|Q ddddd.o\|0.0~~99999.7\|
	143	\|M\|M ddddd.o\|0.0~~99999.7\|
	144	\|DB0.DB~~DB99.DB\|DBxDB nndddd.o\|0.0~~99999999.7\|(((
2.1	145	nn: block number;
	146
	147	dddd: address;
	148	)))
40.1	149	\|(% rowspan="8" %)Word\|I\|IW ddddd\|0~~99999\|
	150	\|Q\|QW ddddd\|0~~99999\|
	151	\|(% rowspan="3" %)M\|MB ddddd\|0~~99999\|
	152	\|MW ddddd\|0~~99999\|(((
2.1	153	MW0=MB(0~~1)
	154
	155	MW2=MB(2~~3)
	156
	157	Address value is a multiple of 2
	158	)))
40.1	159	\|MD ddddd\|0~~99999\|(((
2.1	160	MD0=MB(0~~3)
	161
	162	MD4=MB(4~~7)
	163
	164	Address value is a multiple of 4
	165	)))
40.1	166	\|(% rowspan="3" %)DB0.DB~~DB99.DB\|DBxDBB nndddd\|0~~99999999\|(% rowspan="3" %)(((
2.1	167	nn: block number;
	168
	169	dddd: address
	170	)))
40.1	171	\|DBxDBW nndddd\|0~~99999999
	172	\|DBxDBD nndddd\|0~~99999999
2.1	173
41.1	174	Configure the communication protocol
2.1	175
41.1	176	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png\|\|alt="image-20220824161345-1.png" height="1011" width="1920"]]
2.1	177
41.1	178	Cable Wiring
2.1	179
41.1	180	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png\|\|alt="image-20220824161450-2.png" height="170" width="401"]]
2.1	181
45.1	182	== S7-1200 Ethernet ==
2.1	183
	184	[[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
	185
45.1	186	V-BOX Setting
	187
	188	\|Items\|Settings\|Note
	189	\|Protocol\|Siemens S7-1200\|
	190	\|Connection\|Ethernet\|
	191	\|Port No.\|102\|
	192	\|PLC station No.\|2\|
	193
	194	Address List
	195
	196	\|Type\|Device register\|HMI register\|Format\|Range\|Note
	197	\|(% rowspan="4" %)Bit\|I\|I\|M d.o\|(((
	198	d:0~-~-9999
	199
	200	o:0-7
	201	)))\|
	202	\|Q\|Q\|Q d.o\|(((
	203	d:0~-~-9999
	204
	205	o:0-7
	206	)))\|
	207	\|M\|M\|M d.o\|(((
	208	d:0~-~-9999
	209
	210	o:0-7
	211	)))\|
	212	\|DB0.DB-DB99.DB\|DBxDB\|DBxDBnndddd.o\|(((
	213	nn:0-9999,
	214
	215	dddd:0-9999,
	216
	217	o:0-7
	218	)))\|(((
	219	nn:DB No.
	220
	221	dddd:address value
	222
	223	o: digit address
	224	)))
	225	\|(% rowspan="8" %)Word\|M\|MB\|MB d\|d:0-99999\|
	226	\|M\|MW\|MW d\|d:0-99999\|(((
	227	MW0=MB(0~~1)
	228
	229	MW2=MB(2~~3)
	230
	231	Address value is a multiple of 2
	232	)))
	233	\|M\|MD\|MD d\|d:0-99999\|(((
	234	MD0=MB(0~~3)
	235
	236	MD4=MB(4~~7)
	237
	238	Address value is a multiple of 4
	239	)))
	240	\|I\|IW\|IW d\|d:0-99999\|
	241	\|Q\|QW\|QW d\|d:0-99999\|
	242	\|DB0.DB-DB99.DB\|DBxDBB\|DBxDBBnndddd\|(((
	243	nn:0-9999
	244
	245	dddd:0-9999
	246	)))\|(((
	247	nn:DB No.
	248
	249	dddd:address value
	250	)))
	251	\|DB0.DB-DB99.DB\|DBxDBW\|DBxDBWnndddd\|(((
	252	nn:0-9999
	253
	254	dddd:0-9999
	255	)))\|(((
	256	nn:DB No.
	257
	258	dddd:address value
	259
	260	Address value is a multiple of 2
	261	)))
	262	\|DB0.DB-DB99.DB\|DBxDBD\|DBxDBDnndddd\|(((
	263	nn:0-9999
	264
	265	dddd:0-9999
	266	)))\|(((
	267	nn:DB No.
	268
	269	dddd:address value
	270
	271	Address value is a multiple of 4
	272	)))
	273
	274	Communication Settings
	275
	276	Enable HMI Ethernet in [Project Settings]
	277
25.2	278	== S7-XXX Ethernet ==
2.1	279
	280	Supported Series: Siemens S7-400, S7-1200 and S7-1500
	281
44.1	282	V-BOX setting
2.1	283
	284	\|=Items\|=Settings\|=Note
	285	\|Protocol\|Siemens S7-XXX\|
	286	\|Connection\|Ethernet\|
	287	\|Port No.\|102\|
	288	\|Device No.\|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)\|
	289	\|HMI No.\|Rack (Default as 0)\|
	290
	291	Slot from TIA Portal is equal to Device No. of V-net
	292
	293	Rack from TIA Portal is equal to HMI No. of V-net
	294
44.1	295	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png\|\|alt="image-20220824162459-3.png" height="503" width="798"]]
2.1	296
44.1	297	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png\|\|alt="image-20220824163305-2.png" height="1009" width="1920"]]
2.1	298
44.1	299	Address List
2.1	300
42.1	301	\|Type\|Device register\|Format\|Range\|Note
	302	\|(% rowspan="4" %)Bit\|I\|M d.o\|(((
2.1	303	d:0~-~-9999
	304
	305	o:0-7
	306	)))\|
42.1	307	\|Q\|Q d.o\|(((
2.1	308	d:0~-~-9999
	309
	310	o:0-7
	311	)))\|
42.1	312	\|M\|M d.o\|(((
2.1	313	d:0~-~-9999
	314
	315	o:0-7
	316	)))\|
42.1	317	\|DB0.DB-DB99.DB\|DBxDBnndddd.o\|(((
2.1	318	nn:0-9999,
	319
	320	dddd:0-9999,
	321
	322	o:0-7
	323	)))\|(((
	324	nn:DB No.
	325
	326	dddd:address value
	327
	328	o: digit address
	329	)))
42.1	330	\|(% rowspan="8" %)Word\|M\|MB d\|d:0-99999\|
	331	\|M\|MW d\|d:0-99999\|(((
2.1	332	MW0=MB(0~~1)
	333
	334	MW2=MB(2~~3)
	335
	336	Address value is a multiple of 2
	337	)))
42.1	338	\|M\|MD d\|d:0-99999\|(((
2.1	339	MD0=MB(0~~3)
	340
	341	MD4=MB(4~~7)
	342
	343	Address value is a multiple of 4
	344	)))
42.1	345	\|I\|IW d\|d:0-99999\|
	346	\|Q\|QW d\|d:0-99999\|
	347	\|DB0.DB-DB99.DB\|DBxDBBnndddd\|(((
2.1	348	nn:0-9999
	349
	350	dddd:0-9999
	351	)))\|(((
	352	nn:DB No.
	353
	354	dddd:address value
	355	)))
42.1	356	\|DB0.DB-DB99.DB\|DBxDBWnndddd\|(((
2.1	357	nn:0-9999
	358
	359	dddd:0-9999
	360	)))\|(((
	361	nn:DB No.
	362
	363	dddd:address value
	364
	365	Address value is a multiple of 2
	366	)))
42.1	367	\|DB0.DB-DB99.DB\|DBxDBDnndddd\|(((
2.1	368	nn:0-9999
	369
	370	dddd:0-9999
	371	)))\|(((
	372	nn:DB No.
	373
	374	dddd:address value
	375
	376	Address value is a multiple of 4
	377	)))
	378
44.1	379	Configure the communication protocol
2.1	380
44.1	381	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png\|\|alt="image-20220824163448-3.png" height="557" width="974"]]
2.1	382
	383	✎Note:
	384
	385	* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three V-BOX.
	386	* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
	387
44.1	388	Cable Wiring
2.1	389
44.1	390	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png\|\|alt="image-20220824162342-2.png" height="170" width="401"]]
2.1	391
	392	== {{id name="HLOGOEthernet"/}}LOGO Ethernet ==
	393
	394	Supported Series: Siemens Logo 0BA0, 0BA1 series
	395
	396	V-BOX Settings
	397
	398	\|Items\|Settings\|Note
	399	\|Protocol\|Siemens LOGO\|
	400	\|Connection\|Ethernet\|
	401	\|Port No.\|102\|
	402	\|PLC station No.\|2\|
	403
	404	Address List
	405
	406	\|Number\|Address Type\|Data Type\|Range\|DB Address\|PLC Address
	407	\|1\|RTC\|Word\|1-7\|DB1.DBX984.0\|0x001ec0
	408	\|2\|VB\|Byte\|0-1469\|DB1.DBX0.0\|0x000000
	409	\|3\|VD\|Double Word\|0-1466\|DB1.DBX0.0\|0x000000
	410	\|4\|VW\|Word\|0-1468\|DB1.DBX0.0\|0x000000
	411	\|5\|NAQ\|Word\|1-32\|DB1.DBX1406.0\|0x002bf0
	412	\|6\|NAI\|Word\|1-64\|DB1.DBX1262.0\|0x002770
	413	\|7\|AM\|Word\|1-64\|DB1.DBX1118.0\|0x0022f0
	414	\|8\|AQ\|Word\|1-16\|DB1.DBX1072.0\|0x002180
	415	\|9\|AI\|Word\|1-16\|DB1.DBX1032.0\|0x002040
	416	\|10\|I\|Bit\|1-64\|DB1.DBX1024.0\|0x002000
	417	\|11\|Q\|Bit\|1-64\|DB1.DBX1064.0\|0x002140
	418	\|12\|M\|Bit\|1-112\|DB1.DBX1104.0\|0x002280
	419	\|13\|NI\|Bit\|1-128\|DB1.DBX1246.0\|0x0026f0
	420	\|14\|NQ\|Bit\|1-128\|DB1.DBX1390.0\|0x002b70
	421	\|15\|V\|Bit\|0-14697\|DB1.DBX0.0\|0x000000
	422
	423	PLC Settings in LOGO Software:
	424
	425	Click [Tools]~-~-[Ethernet Connections],shown as below.
	426
	427	{{id name="IPIStudio.125C.PLCprotocols.WebHome4012.PLCProtocol_html_8b9d2322edf89519.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png\|\|alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
	428
	429	Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
	430
	431	{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228142937-4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_316247e0130c4c55.png\|\|alt="image-20221228142937-4.png" height="484" width="366"]]
	432
	433	TSAP set:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
	434
	435	{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143047-5.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png\|\|alt="image-20221228143047-5.png" height="626" width="1088"]]
	436
	437	Download Project: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
	438
	439	{{id name="IPIStudio.125C.PLCprotocols.WebHome40image-20221228143246-6.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png\|\|alt="image-20221228143246-6.png" height="698" width="688"]]
	440
	441	V-BOX Communication Settings
	442
	443	Set PLC IP in [IP Address] settings;
	444
	445	{{id name="ILldwDGntf4.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ab570912d299c09.png\|\|alt="LldwDGntf4.png" height="530" width="899"]]
	446
	447	Enable V-BOX Ethernet in [Network];
	448
	449	{{id name="IWgvjfWbQif.png"/}}[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_637860db3ca1ca1b.png\|\|alt="WgvjfWbQif.png" height="654" width="1195"]]
	450
	451	TSAP setting
	452
	453	* The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
	454
	455	function init.main()
	456	addr_setword("@W_0#HSW1200",8192) //~-~- Set the source TSAP address//
	457	addr_setword("@W_0#HSW1201",4096) //~-~- Set the destination TSAP address//
17.1	458	end
2.1	459
	460	Note: The name of the test script is init, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
	461
	462	✎Note:
	463
	464	* Communication port configuration:
	465	** Continuous length needs to be set to 0.
	466	** Integration interval needs to be set to 1. (no change may result in data errors)
	467	** Set Port and Device Station NO.
	468	** Other set as defaulted.
	469	* Notes on the use of registers:
	470	** Register VD: Use only registers that are multiples of 4, such as 0, 4, 8, etc.
	471	** Register VW: Use only registers thay are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )

Wiki source code of Siemens

Navigation

Table of Contents