Wiki source code of Siemens

Version 49.2 by Joe on 2024/04/30 14:26

version	line-number	content
16.1	1	== S7-200 Smart Serial ==
	2
31.1	3	V-BOX setting
27.1	4
33.1	5	(% style="width:1323.87px" %)
37.1	6	\|Items\|Settings\|Note
	7	\|Protocol\|(% style="width:783px" %)Siemens S7-200 CPU22x/Smart PPI\|
	8	\|Connection\|(% style="width:783px" %)RS485\|
	9	\|Baud rate\|(% style="width:783px" %)9600\|
	10	\|Data bit\|(% style="width:783px" %)8\|
	11	\|Parity\|(% style="width:783px" %)EVEN\|
	12	\|Stop bit\|(% style="width:783px" %)1\|
	13	\|PLC station No.\|(% style="width:783px" %)2\|
27.1	14
	15	(% style="text-align:center" %)
	16	[[image:西门子200串口.png]]
	17
31.1	18	Address List
27.1	19
39.1	20	\|Type\|Device register\|Format\|Range\|Note
	21	\|(% rowspan="9" %)Bit\|I\|I ddddd.o\|0.0~~99999.7\|
	22	\|Q\|Q ddddd.o\|0.0~~99999.7\|
	23	\|V\|VWbit ddddd.o\|0.0~~99999.7\|
	24	\|V\|V ddddd.o\|0.0~~99999.7\|
	25	\|M\|M ddddd.o\|0.0~~99999.7\|
	26	\|SM\|ddddd.o\|0.0~~99999.7\|
	27	\|S\|ddddd.o\|0.0~~99999.7\|Read only
	28	\|T\|ddddd\|0~~99999\|Timer state, read only
	29	\|C\|ddddd\|0~~99999\|Counter state, read only
	30	\|(% rowspan="12" %)Word\|I\|IW ddddd\|0~~99999\|
	31	\|Q\|QW ddddd\|0~~99999\|
	32	\|AI\|AIW ddddd\|0~~99999\|
	33	\|AQ\|VB ddddd\|0~~99999\|
	34	\|V\|VW ddddd\|0~~99998\|(((
26.1	35	VW0=VB (0~~1)
	36
	37	VW2=VB (2~~3)
	38
	39	Address value is a multiple of 2
	40	)))
39.1	41	\|V\|VD ddddd\|0~~99998\|(((
26.1	42	VD0=VB (0~~3)
	43
	44	VD2=VB (4~~7)
	45
	46	Address value is a multiple of 4
	47	)))
39.1	48	\|M\|MB ddddd\|0~~99999\|
	49	\|M\|MW ddddd\|0~~99999\|(((
26.1	50	MW0=MB(0~~1)
	51
	52	MW2=MB(2~~3)
	53
	54	Address value is a multiple of 2
	55	)))
39.1	56	\|M\|MD ddddd\|0~~99999\|(((
26.1	57	MD0=MB(0~~3)
	58
	59	MD4=MB(4~~7)
	60
	61	Address value is a multiple of 4
	62	)))
39.1	63	\|T\|TW ddddd\|0~~99999\|Value of timer
	64	\|C\|CW ddddd\|0~~99999\|Value of counter
	65	\|W\|SW ddddd\|0~~99999\|
26.1	66
31.1	67	PLC setting
20.1	68
	69	(% style="text-align:center" %)
	70	[[image:西门子软件版本.png]]
	71
	72	(% style="text-align:center" %)
	73	[[image:485通讯配置.png]]
	74
31.1	75	Connect and Download
20.1	76
	77	(% style="text-align:center" %)
	78	[[image:以太网 PC和PLC连接.png]]
	79
	80	(% style="text-align:center" %)
	81	[[image:以太网下载.png]]
	82
31.1	83	Cable Wiring
20.1	84
	85	(% style="text-align:center" %)
	86	[[image:485接线.png]]
	87
14.1	88	== S7-200 Smart Ethernet ==
2.1	89
32.1	90	V-BOX setting
16.1	91
34.1	92	\|Items\|Settings
	93	\|Protocol\|Siemens S7-200 Smart（Ethernet）
	94	\|Connection\|Ethernet
	95	\|Port No.\|102
	96	\|PLC station No.\|2
29.1	97
16.1	98	(% style="text-align:center" %)
	99	[[image:西门子200smart 以太网.png]]
	100
32.1	101	PLC setting
14.1	102
	103	(% style="text-align:center" %)
	104	[[image:西门子软件版本.png]]
	105
	106	(% style="text-align:center" %)
	107	[[image:以太网通讯配置.png]]
	108
32.1	109	Connect and Download
14.1	110
	111	(% style="text-align:center" %)
19.1	112	[[image:以太网 PC和PLC连接.png]]
	113
	114	(% style="text-align:center" %)
14.1	115	[[image:以太网下载.png]]
	116
32.1	117	Cable Wiring
15.1	118
	119	V-Box : RJ45 Ethernet interface
	120
	121	PLC : RJ45 Ethernet interface
	122
	123	(% style="text-align:center" %)
	124	[[image:以太网连接.png]]
	125
41.1	126	== S7-300 Ethernet ==
2.1	127
	128	Supported Series: Siemens S7-300 series PLC
	129
41.1	130	V-BOX setting
2.1	131
	132	\|Items\|Settings\|Note
	133	\|Protocol\|Simens S7-300 Ethernet\|
	134	\|Connection\|Ethernet\|
	135	\|Port No.\|102\|
	136	\|PLC station No.\|2\|Need to be same as the PLC setting
	137
41.1	138	Address List
2.1	139
40.1	140	\|Type\|Device register\|Format\|Range\|Note
	141	\|(% rowspan="4" %)Bit\|I\|I ddddd.o\|0.0~~99999.7\|
	142	\|Q\|Q ddddd.o\|0.0~~99999.7\|
	143	\|M\|M ddddd.o\|0.0~~99999.7\|
	144	\|DB0.DB~~DB99.DB\|DBxDB nndddd.o\|0.0~~99999999.7\|(((
2.1	145	nn: block number;
	146
	147	dddd: address;
	148	)))
40.1	149	\|(% rowspan="8" %)Word\|I\|IW ddddd\|0~~99999\|
	150	\|Q\|QW ddddd\|0~~99999\|
	151	\|(% rowspan="3" %)M\|MB ddddd\|0~~99999\|
	152	\|MW ddddd\|0~~99999\|(((
2.1	153	MW0=MB(0~~1)
	154
	155	MW2=MB(2~~3)
	156
	157	Address value is a multiple of 2
	158	)))
40.1	159	\|MD ddddd\|0~~99999\|(((
2.1	160	MD0=MB(0~~3)
	161
	162	MD4=MB(4~~7)
	163
	164	Address value is a multiple of 4
	165	)))
40.1	166	\|(% rowspan="3" %)DB0.DB~~DB99.DB\|DBxDBB nndddd\|0~~99999999\|(% rowspan="3" %)(((
2.1	167	nn: block number;
	168
	169	dddd: address
	170	)))
40.1	171	\|DBxDBW nndddd\|0~~99999999
	172	\|DBxDBD nndddd\|0~~99999999
2.1	173
41.1	174	Configure the communication protocol
2.1	175
41.1	176	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png\|\|alt="image-20220824161345-1.png" height="1011" width="1920"]]
2.1	177
41.1	178	Cable Wiring
2.1	179
41.1	180	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png\|\|alt="image-20220824161450-2.png" height="170" width="401"]]
2.1	181
45.1	182	== S7-1200 Ethernet ==
2.1	183
	184	[[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
	185
45.1	186	V-BOX Setting
	187
	188	\|Items\|Settings\|Note
	189	\|Protocol\|Siemens S7-1200\|
	190	\|Connection\|Ethernet\|
	191	\|Port No.\|102\|
	192	\|PLC station No.\|2\|
	193
46.1	194	(% style="text-align:center" %)
	195	[[image:西门子1200协议参数.png]]
	196
45.1	197	Address List
	198
	199	\|Type\|Device register\|HMI register\|Format\|Range\|Note
	200	\|(% rowspan="4" %)Bit\|I\|I\|M d.o\|(((
	201	d:0~-~-9999
	202
	203	o:0-7
	204	)))\|
	205	\|Q\|Q\|Q d.o\|(((
	206	d:0~-~-9999
	207
	208	o:0-7
	209	)))\|
	210	\|M\|M\|M d.o\|(((
	211	d:0~-~-9999
	212
	213	o:0-7
	214	)))\|
	215	\|DB0.DB-DB99.DB\|DBxDB\|DBxDBnndddd.o\|(((
	216	nn:0-9999,
	217
	218	dddd:0-9999,
	219
	220	o:0-7
	221	)))\|(((
	222	nn:DB No.
	223
	224	dddd:address value
	225
	226	o: digit address
	227	)))
	228	\|(% rowspan="8" %)Word\|M\|MB\|MB d\|d:0-99999\|
	229	\|M\|MW\|MW d\|d:0-99999\|(((
	230	MW0=MB(0~~1)
	231
	232	MW2=MB(2~~3)
	233
	234	Address value is a multiple of 2
	235	)))
	236	\|M\|MD\|MD d\|d:0-99999\|(((
	237	MD0=MB(0~~3)
	238
	239	MD4=MB(4~~7)
	240
	241	Address value is a multiple of 4
	242	)))
	243	\|I\|IW\|IW d\|d:0-99999\|
	244	\|Q\|QW\|QW d\|d:0-99999\|
	245	\|DB0.DB-DB99.DB\|DBxDBB\|DBxDBBnndddd\|(((
	246	nn:0-9999
	247
	248	dddd:0-9999
	249	)))\|(((
	250	nn:DB No.
	251
	252	dddd:address value
	253	)))
	254	\|DB0.DB-DB99.DB\|DBxDBW\|DBxDBWnndddd\|(((
	255	nn:0-9999
	256
	257	dddd:0-9999
	258	)))\|(((
	259	nn:DB No.
	260
	261	dddd:address value
	262
	263	Address value is a multiple of 2
	264	)))
	265	\|DB0.DB-DB99.DB\|DBxDBD\|DBxDBDnndddd\|(((
	266	nn:0-9999
	267
	268	dddd:0-9999
	269	)))\|(((
	270	nn:DB No.
	271
	272	dddd:address value
	273
	274	Address value is a multiple of 4
	275	)))
	276
46.1	277	{{info}}
	278	✎Note:
45.1	279
46.1	280	* The S7-1200 supports simultaneous connection of three devices.
	281	* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (S7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
	282	* S7-1200 String type, the default first two bytes are used to store the maximum character and valid characters, so the text data will be shifted back one word address. When interacting with the data, what way this address plc is displayed with is unknown. And because of an extra word of data causes us to display the wrong. The solution is if we use String, then the actual data address we want to operate on is actually shifted back two bytes, so as long as the address on the project is shifted back 2 bits to correspond with the actual data address.
	283	{{/info}}
45.1	284
46.1	285	PLC Settings
	286
	287	Add BD
	288
	289	* Please uncheck [Symbolic access only] option;
	290
	291	(% style="text-align:center" %)
	292	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png]]
	293
	294	Address settings, using BD2 as example.
	295
	296	* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
	297	* 2 represent DB block number
	298	* xxxx represent address
	299
	300	Such as:
	301
	302	* DBxDBB20000 = DB2.DBB0
	303	* DBxDBW20004 = DB2.DBW4
	304
	305	(% style="text-align:center" %)
	306	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png]]
	307
	308	How to connect with S7-1200 Firmware V4.0
	309
	310	PLC configuration
	311
	312	* Double click [device configuration] in Siemens via software
	313	* Double click [protection] to enter protection configuration screen
	314
	315	(% style="text-align:center" %)
	316	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png]]
	317
	318	* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
	319
	320	(% style="text-align:center" %)
	321	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png]]
	322
	323	DB settings
	324
	325	* Right click [DB], select [properties]
	326	* Uncheck [optimized block access]
	327
	328	Cable Wiring
	329
	330	(% style="text-align:center" %)
	331	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png]]
	332
25.2	333	== S7-XXX Ethernet ==
2.1	334
	335	Supported Series: Siemens S7-400, S7-1200 and S7-1500
	336
44.1	337	V-BOX setting
2.1	338
	339	\|=Items\|=Settings\|=Note
	340	\|Protocol\|Siemens S7-XXX\|
	341	\|Connection\|Ethernet\|
	342	\|Port No.\|102\|
	343	\|Device No.\|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)\|
	344	\|HMI No.\|Rack (Default as 0)\|
	345
	346	Slot from TIA Portal is equal to Device No. of V-net
	347
	348	Rack from TIA Portal is equal to HMI No. of V-net
	349
44.1	350	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png\|\|alt="image-20220824162459-3.png" height="503" width="798"]]
2.1	351
44.1	352	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png\|\|alt="image-20220824163305-2.png" height="1009" width="1920"]]
2.1	353
44.1	354	Address List
2.1	355
42.1	356	\|Type\|Device register\|Format\|Range\|Note
	357	\|(% rowspan="4" %)Bit\|I\|M d.o\|(((
2.1	358	d:0~-~-9999
	359
	360	o:0-7
	361	)))\|
42.1	362	\|Q\|Q d.o\|(((
2.1	363	d:0~-~-9999
	364
	365	o:0-7
	366	)))\|
42.1	367	\|M\|M d.o\|(((
2.1	368	d:0~-~-9999
	369
	370	o:0-7
	371	)))\|
42.1	372	\|DB0.DB-DB99.DB\|DBxDBnndddd.o\|(((
2.1	373	nn:0-9999,
	374
	375	dddd:0-9999,
	376
	377	o:0-7
	378	)))\|(((
	379	nn:DB No.
	380
	381	dddd:address value
	382
	383	o: digit address
	384	)))
42.1	385	\|(% rowspan="8" %)Word\|M\|MB d\|d:0-99999\|
	386	\|M\|MW d\|d:0-99999\|(((
2.1	387	MW0=MB(0~~1)
	388
	389	MW2=MB(2~~3)
	390
	391	Address value is a multiple of 2
	392	)))
42.1	393	\|M\|MD d\|d:0-99999\|(((
2.1	394	MD0=MB(0~~3)
	395
	396	MD4=MB(4~~7)
	397
	398	Address value is a multiple of 4
	399	)))
42.1	400	\|I\|IW d\|d:0-99999\|
	401	\|Q\|QW d\|d:0-99999\|
	402	\|DB0.DB-DB99.DB\|DBxDBBnndddd\|(((
2.1	403	nn:0-9999
	404
	405	dddd:0-9999
	406	)))\|(((
	407	nn:DB No.
	408
	409	dddd:address value
	410	)))
42.1	411	\|DB0.DB-DB99.DB\|DBxDBWnndddd\|(((
2.1	412	nn:0-9999
	413
	414	dddd:0-9999
	415	)))\|(((
	416	nn:DB No.
	417
	418	dddd:address value
	419
	420	Address value is a multiple of 2
	421	)))
42.1	422	\|DB0.DB-DB99.DB\|DBxDBDnndddd\|(((
2.1	423	nn:0-9999
	424
	425	dddd:0-9999
	426	)))\|(((
	427	nn:DB No.
	428
	429	dddd:address value
	430
	431	Address value is a multiple of 4
	432	)))
	433
44.1	434	Configure the communication protocol
2.1	435
44.1	436	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png\|\|alt="image-20220824163448-3.png" height="557" width="974"]]
2.1	437
	438	✎Note:
	439
	440	* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three V-BOX.
	441	* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
	442
44.1	443	Cable Wiring
2.1	444
44.1	445	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png\|\|alt="image-20220824162342-2.png" height="170" width="401"]]
2.1	446
	447	== {{id name="HLOGOEthernet"/}}LOGO Ethernet ==
	448
	449	Supported Series: Siemens Logo 0BA0, 0BA1 series
	450
	451	V-BOX Settings
	452
	453	\|Items\|Settings\|Note
	454	\|Protocol\|Siemens LOGO\|
	455	\|Connection\|Ethernet\|
	456	\|Port No.\|102\|
	457	\|PLC station No.\|2\|
	458
	459	Address List
	460
	461	\|Number\|Address Type\|Data Type\|Range\|DB Address\|PLC Address
	462	\|1\|RTC\|Word\|1-7\|DB1.DBX984.0\|0x001ec0
	463	\|2\|VB\|Byte\|0-1469\|DB1.DBX0.0\|0x000000
	464	\|3\|VD\|Double Word\|0-1466\|DB1.DBX0.0\|0x000000
	465	\|4\|VW\|Word\|0-1468\|DB1.DBX0.0\|0x000000
	466	\|5\|NAQ\|Word\|1-32\|DB1.DBX1406.0\|0x002bf0
	467	\|6\|NAI\|Word\|1-64\|DB1.DBX1262.0\|0x002770
	468	\|7\|AM\|Word\|1-64\|DB1.DBX1118.0\|0x0022f0
	469	\|8\|AQ\|Word\|1-16\|DB1.DBX1072.0\|0x002180
	470	\|9\|AI\|Word\|1-16\|DB1.DBX1032.0\|0x002040
	471	\|10\|I\|Bit\|1-64\|DB1.DBX1024.0\|0x002000
	472	\|11\|Q\|Bit\|1-64\|DB1.DBX1064.0\|0x002140
	473	\|12\|M\|Bit\|1-112\|DB1.DBX1104.0\|0x002280
	474	\|13\|NI\|Bit\|1-128\|DB1.DBX1246.0\|0x0026f0
	475	\|14\|NQ\|Bit\|1-128\|DB1.DBX1390.0\|0x002b70
	476	\|15\|V\|Bit\|0-14697\|DB1.DBX0.0\|0x000000
	477
	478	PLC Settings in LOGO Software:
	479
	480	Click [Tools]~-~-[Ethernet Connections],shown as below.
	481
46.1	482	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png\|\|alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
2.1	483
	484	Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
	485
48.2	486	(% style="text-align:center" %)
	487	[[image:hXadxkZTuR.png]]
2.1	488
48.2	489	TSAP set: The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
2.1	490
46.1	491	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png\|\|alt="image-20221228143047-5.png" height="626" width="1088"]]
2.1	492
	493	Download Project: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
	494
46.1	495	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png\|\|alt="image-20221228143246-6.png" height="698" width="688"]]
2.1	496
	497	V-BOX Communication Settings
	498
	499	Set PLC IP in [IP Address] settings;
	500
47.1	501	(% style="text-align:center" %)
48.1	502	[[image:V-NET_Client logo.png]]
2.1	503
	504	TSAP setting
	505
	506	* The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
	507
48.2	508	You can copy the following script into V-net directly.
	509
	510	(% class="box successmessage" %)
	511	(((
2.1	512	function init.main()
	513	addr_setword("@W_0#HSW1200",8192) //~-~- Set the source TSAP address//
	514	addr_setword("@W_0#HSW1201",4096) //~-~- Set the destination TSAP address//
17.1	515	end
48.2	516	)))
2.1	517
48.2	518	(% class="box infomessage" %)
	519	(((
	520	Note:
	521	The name of the test script must be “init”, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
	522	)))
2.1	523
	524	✎Note:
	525
	526	* Communication port configuration:
	527	** Continuous length needs to be set to 0.
	528	** Integration interval needs to be set to 1. (no change may result in data errors)
	529	** Set Port and Device Station NO.
	530	** Other set as defaulted.
	531	* Notes on the use of registers:
	532	** Register VD: Use only registers that are multiples of 4, such as 0, 4, 8, etc.
48.2	533	** Register VW: Use only registers they are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )

Wiki source code of Siemens

Navigation

Table of Contents