Wiki source code of Siemens

Version 50.3 by Joe on 2024/05/21 10:07

version	line-number	content
16.1	1	== S7-200 Smart Serial ==
	2
31.1	3	V-BOX setting
27.1	4
33.1	5	(% style="width:1323.87px" %)
37.1	6	\|Items\|Settings\|Note
	7	\|Protocol\|(% style="width:783px" %)Siemens S7-200 CPU22x/Smart PPI\|
	8	\|Connection\|(% style="width:783px" %)RS485\|
	9	\|Baud rate\|(% style="width:783px" %)9600\|
	10	\|Data bit\|(% style="width:783px" %)8\|
	11	\|Parity\|(% style="width:783px" %)EVEN\|
	12	\|Stop bit\|(% style="width:783px" %)1\|
	13	\|PLC station No.\|(% style="width:783px" %)2\|
27.1	14
	15	(% style="text-align:center" %)
	16	[[image:西门子200串口.png]]
	17
31.1	18	Address List
27.1	19
39.1	20	\|Type\|Device register\|Format\|Range\|Note
	21	\|(% rowspan="9" %)Bit\|I\|I ddddd.o\|0.0~~99999.7\|
	22	\|Q\|Q ddddd.o\|0.0~~99999.7\|
	23	\|V\|VWbit ddddd.o\|0.0~~99999.7\|
	24	\|V\|V ddddd.o\|0.0~~99999.7\|
	25	\|M\|M ddddd.o\|0.0~~99999.7\|
	26	\|SM\|ddddd.o\|0.0~~99999.7\|
	27	\|S\|ddddd.o\|0.0~~99999.7\|Read only
	28	\|T\|ddddd\|0~~99999\|Timer state, read only
	29	\|C\|ddddd\|0~~99999\|Counter state, read only
	30	\|(% rowspan="12" %)Word\|I\|IW ddddd\|0~~99999\|
	31	\|Q\|QW ddddd\|0~~99999\|
	32	\|AI\|AIW ddddd\|0~~99999\|
	33	\|AQ\|VB ddddd\|0~~99999\|
	34	\|V\|VW ddddd\|0~~99998\|(((
26.1	35	VW0=VB (0~~1)
	36
	37	VW2=VB (2~~3)
	38
	39	Address value is a multiple of 2
	40	)))
39.1	41	\|V\|VD ddddd\|0~~99998\|(((
26.1	42	VD0=VB (0~~3)
	43
	44	VD2=VB (4~~7)
	45
	46	Address value is a multiple of 4
	47	)))
39.1	48	\|M\|MB ddddd\|0~~99999\|
	49	\|M\|MW ddddd\|0~~99999\|(((
26.1	50	MW0=MB(0~~1)
	51
	52	MW2=MB(2~~3)
	53
	54	Address value is a multiple of 2
	55	)))
39.1	56	\|M\|MD ddddd\|0~~99999\|(((
26.1	57	MD0=MB(0~~3)
	58
	59	MD4=MB(4~~7)
	60
	61	Address value is a multiple of 4
	62	)))
39.1	63	\|T\|TW ddddd\|0~~99999\|Value of timer
	64	\|C\|CW ddddd\|0~~99999\|Value of counter
	65	\|W\|SW ddddd\|0~~99999\|
26.1	66
31.1	67	PLC setting
20.1	68
	69	(% style="text-align:center" %)
	70	[[image:西门子软件版本.png]]
	71
	72	(% style="text-align:center" %)
	73	[[image:485通讯配置.png]]
	74
31.1	75	Connect and Download
20.1	76
	77	(% style="text-align:center" %)
	78	[[image:以太网 PC和PLC连接.png]]
	79
	80	(% style="text-align:center" %)
	81	[[image:以太网下载.png]]
	82
31.1	83	Cable Wiring
20.1	84
	85	(% style="text-align:center" %)
	86	[[image:485接线.png]]
	87
14.1	88	== S7-200 Smart Ethernet ==
2.1	89
32.1	90	V-BOX setting
16.1	91
34.1	92	\|Items\|Settings
	93	\|Protocol\|Siemens S7-200 Smart（Ethernet）
	94	\|Connection\|Ethernet
	95	\|Port No.\|102
	96	\|PLC station No.\|2
29.1	97
16.1	98	(% style="text-align:center" %)
	99	[[image:西门子200smart 以太网.png]]
	100
32.1	101	PLC setting
14.1	102
	103	(% style="text-align:center" %)
	104	[[image:西门子软件版本.png]]
	105
	106	(% style="text-align:center" %)
	107	[[image:以太网通讯配置.png]]
	108
32.1	109	Connect and Download
14.1	110
	111	(% style="text-align:center" %)
19.1	112	[[image:以太网 PC和PLC连接.png]]
	113
	114	(% style="text-align:center" %)
14.1	115	[[image:以太网下载.png]]
	116
32.1	117	Cable Wiring
15.1	118
	119	V-Box : RJ45 Ethernet interface
	120
	121	PLC : RJ45 Ethernet interface
	122
	123	(% style="text-align:center" %)
	124	[[image:以太网连接.png]]
	125
41.1	126	== S7-300 Ethernet ==
2.1	127
	128	Supported Series: Siemens S7-300 series PLC
	129
41.1	130	V-BOX setting
2.1	131
	132	\|Items\|Settings\|Note
	133	\|Protocol\|Simens S7-300 Ethernet\|
	134	\|Connection\|Ethernet\|
	135	\|Port No.\|102\|
	136	\|PLC station No.\|2\|Need to be same as the PLC setting
	137
41.1	138	Address List
2.1	139
40.1	140	\|Type\|Device register\|Format\|Range\|Note
	141	\|(% rowspan="4" %)Bit\|I\|I ddddd.o\|0.0~~99999.7\|
	142	\|Q\|Q ddddd.o\|0.0~~99999.7\|
	143	\|M\|M ddddd.o\|0.0~~99999.7\|
	144	\|DB0.DB~~DB99.DB\|DBxDB nndddd.o\|0.0~~99999999.7\|(((
2.1	145	nn: block number;
	146
	147	dddd: address;
	148	)))
40.1	149	\|(% rowspan="8" %)Word\|I\|IW ddddd\|0~~99999\|
	150	\|Q\|QW ddddd\|0~~99999\|
	151	\|(% rowspan="3" %)M\|MB ddddd\|0~~99999\|
	152	\|MW ddddd\|0~~99999\|(((
2.1	153	MW0=MB(0~~1)
	154
	155	MW2=MB(2~~3)
	156
	157	Address value is a multiple of 2
	158	)))
40.1	159	\|MD ddddd\|0~~99999\|(((
2.1	160	MD0=MB(0~~3)
	161
	162	MD4=MB(4~~7)
	163
	164	Address value is a multiple of 4
	165	)))
40.1	166	\|(% rowspan="3" %)DB0.DB~~DB99.DB\|DBxDBB nndddd\|0~~99999999\|(% rowspan="3" %)(((
2.1	167	nn: block number;
	168
	169	dddd: address
	170	)))
40.1	171	\|DBxDBW nndddd\|0~~99999999
	172	\|DBxDBD nndddd\|0~~99999999
2.1	173
41.1	174	Configure the communication protocol
2.1	175
41.1	176	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_8e00ed9483ddb629.png\|\|alt="image-20220824161345-1.png" height="1011" width="1920"]]
2.1	177
41.1	178	Cable Wiring
2.1	179
41.1	180	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png\|\|alt="image-20220824161450-2.png" height="170" width="401"]]
2.1	181
45.1	182	== S7-1200 Ethernet ==
2.1	183
	184	[[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
	185
45.1	186	V-BOX Setting
	187
	188	\|Items\|Settings\|Note
	189	\|Protocol\|Siemens S7-1200\|
	190	\|Connection\|Ethernet\|
	191	\|Port No.\|102\|
	192	\|PLC station No.\|2\|
	193
46.1	194	(% style="text-align:center" %)
	195	[[image:西门子1200协议参数.png]]
	196
45.1	197	Address List
	198
	199	\|Type\|Device register\|HMI register\|Format\|Range\|Note
	200	\|(% rowspan="4" %)Bit\|I\|I\|M d.o\|(((
	201	d:0~-~-9999
	202
	203	o:0-7
	204	)))\|
	205	\|Q\|Q\|Q d.o\|(((
	206	d:0~-~-9999
	207
	208	o:0-7
	209	)))\|
	210	\|M\|M\|M d.o\|(((
	211	d:0~-~-9999
	212
	213	o:0-7
	214	)))\|
	215	\|DB0.DB-DB99.DB\|DBxDB\|DBxDBnndddd.o\|(((
	216	nn:0-9999,
	217
	218	dddd:0-9999,
	219
	220	o:0-7
	221	)))\|(((
	222	nn:DB No.
	223
	224	dddd:address value
	225
	226	o: digit address
	227	)))
	228	\|(% rowspan="8" %)Word\|M\|MB\|MB d\|d:0-99999\|
	229	\|M\|MW\|MW d\|d:0-99999\|(((
	230	MW0=MB(0~~1)
	231
	232	MW2=MB(2~~3)
	233
	234	Address value is a multiple of 2
	235	)))
	236	\|M\|MD\|MD d\|d:0-99999\|(((
	237	MD0=MB(0~~3)
	238
	239	MD4=MB(4~~7)
	240
	241	Address value is a multiple of 4
	242	)))
	243	\|I\|IW\|IW d\|d:0-99999\|
	244	\|Q\|QW\|QW d\|d:0-99999\|
	245	\|DB0.DB-DB99.DB\|DBxDBB\|DBxDBBnndddd\|(((
	246	nn:0-9999
	247
	248	dddd:0-9999
	249	)))\|(((
	250	nn:DB No.
	251
	252	dddd:address value
	253	)))
	254	\|DB0.DB-DB99.DB\|DBxDBW\|DBxDBWnndddd\|(((
	255	nn:0-9999
	256
	257	dddd:0-9999
	258	)))\|(((
	259	nn:DB No.
	260
	261	dddd:address value
	262
	263	Address value is a multiple of 2
	264	)))
	265	\|DB0.DB-DB99.DB\|DBxDBD\|DBxDBDnndddd\|(((
	266	nn:0-9999
	267
	268	dddd:0-9999
	269	)))\|(((
	270	nn:DB No.
	271
	272	dddd:address value
	273
	274	Address value is a multiple of 4
	275	)))
	276
46.1	277	{{info}}
	278	✎Note:
45.1	279
46.1	280	* The S7-1200 supports simultaneous connection of three devices.
	281	* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (S7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
	282	* S7-1200 String type, the default first two bytes are used to store the maximum character and valid characters, so the text data will be shifted back one word address. When interacting with the data, what way this address plc is displayed with is unknown. And because of an extra word of data causes us to display the wrong. The solution is if we use String, then the actual data address we want to operate on is actually shifted back two bytes, so as long as the address on the project is shifted back 2 bits to correspond with the actual data address.
	283	{{/info}}
45.1	284
46.1	285	PLC Settings
	286
	287	Add BD
	288
	289	* Please uncheck [Symbolic access only] option;
	290
	291	(% style="text-align:center" %)
	292	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_872ec32d12b55aa.png]]
	293
	294	Address settings, using BD2 as example.
	295
	296	* DB×DBB2xxxx, DB×DBW2xxxx, DB×DBD2xxxx for accessing data of DB2 in B1.
	297	* 2 represent DB block number
	298	* xxxx represent address
	299
	300	Such as:
	301
	302	* DBxDBB20000 = DB2.DBB0
	303	* DBxDBW20004 = DB2.DBW4
	304
	305	(% style="text-align:center" %)
	306	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_8ee8d3ac3637bfc4.png]]
	307
49.3	308	How to setting String in PLC and V-net
	309	PLC configuration
	310
	311	choosing Data type~-~-String→add"[]" after String and input data length
	312
	313	(% style="text-align:center" %)
	314	[[image:yUYuRVmMcL.png]]
	315
	316	V-box configuration
	317
	318	(% style="text-align:center" %)
	319	[[image:BSRBeEWL0O.png]]
	320
49.4	321	choosing Word and DBxDBW →input Register Main No. →Data format is String →input data length you want to use → choosing Byte order~-~-Little-endian
49.3	322
49.4	323	(% class="box infomessage" %)
	324	(((
	325	Note: Register Main No. = offset in PLC + 2
	326	For example, the image above has an offset of 4, so the register Main No. is 10006
	327	If an offset is 8, the register Main No. is 10010
	328	)))
	329
46.1	330	How to connect with S7-1200 Firmware V4.0
	331
	332	PLC configuration
	333
	334	* Double click [device configuration] in Siemens via software
	335	* Double click [protection] to enter protection configuration screen
	336
	337	(% style="text-align:center" %)
	338	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_664a826cd356c830.png]]
	339
	340	* Check [Permit access with PUT / GET communication from remote partner (PLC, HMI, OPC, ...)]
	341
	342	(% style="text-align:center" %)
	343	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_78026942a88f0fdb.png]]
	344
	345	DB settings
	346
	347	* Right click [DB], select [properties]
	348	* Uncheck [optimized block access]
	349
	350	Cable Wiring
	351
	352	(% style="text-align:center" %)
	353	[[image:xwiki_PIStudio_12.PLC+protocols_WebHome_ac8ece9a26719fda.png]]
	354
25.2	355	== S7-XXX Ethernet ==
2.1	356
	357	Supported Series: Siemens S7-400, S7-1200 and S7-1500
	358
44.1	359	V-BOX setting
2.1	360
	361	\|=Items\|=Settings\|=Note
	362	\|Protocol\|Siemens S7-XXX\|
	363	\|Connection\|Ethernet\|
	364	\|Port No.\|102\|
	365	\|Device No.\|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)\|
	366	\|HMI No.\|Rack (Default as 0)\|
	367
	368	Slot from TIA Portal is equal to Device No. of V-net
	369
	370	Rack from TIA Portal is equal to HMI No. of V-net
	371
44.1	372	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d78bc267e5fc6394.png\|\|alt="image-20220824162459-3.png" height="503" width="798"]]
2.1	373
44.1	374	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_c9ae84ef5d418580.png\|\|alt="image-20220824163305-2.png" height="1009" width="1920"]]
2.1	375
44.1	376	Address List
2.1	377
42.1	378	\|Type\|Device register\|Format\|Range\|Note
	379	\|(% rowspan="4" %)Bit\|I\|M d.o\|(((
2.1	380	d:0~-~-9999
	381
	382	o:0-7
	383	)))\|
42.1	384	\|Q\|Q d.o\|(((
2.1	385	d:0~-~-9999
	386
	387	o:0-7
	388	)))\|
42.1	389	\|M\|M d.o\|(((
2.1	390	d:0~-~-9999
	391
	392	o:0-7
	393	)))\|
42.1	394	\|DB0.DB-DB99.DB\|DBxDBnndddd.o\|(((
2.1	395	nn:0-9999,
	396
	397	dddd:0-9999,
	398
	399	o:0-7
	400	)))\|(((
	401	nn:DB No.
	402
	403	dddd:address value
	404
	405	o: digit address
	406	)))
42.1	407	\|(% rowspan="8" %)Word\|M\|MB d\|d:0-99999\|
	408	\|M\|MW d\|d:0-99999\|(((
2.1	409	MW0=MB(0~~1)
	410
	411	MW2=MB(2~~3)
	412
	413	Address value is a multiple of 2
	414	)))
42.1	415	\|M\|MD d\|d:0-99999\|(((
2.1	416	MD0=MB(0~~3)
	417
	418	MD4=MB(4~~7)
	419
	420	Address value is a multiple of 4
	421	)))
42.1	422	\|I\|IW d\|d:0-99999\|
	423	\|Q\|QW d\|d:0-99999\|
	424	\|DB0.DB-DB99.DB\|DBxDBBnndddd\|(((
2.1	425	nn:0-9999
	426
	427	dddd:0-9999
	428	)))\|(((
	429	nn:DB No.
	430
	431	dddd:address value
	432	)))
42.1	433	\|DB0.DB-DB99.DB\|DBxDBWnndddd\|(((
2.1	434	nn:0-9999
	435
	436	dddd:0-9999
	437	)))\|(((
	438	nn:DB No.
	439
	440	dddd:address value
	441
	442	Address value is a multiple of 2
	443	)))
42.1	444	\|DB0.DB-DB99.DB\|DBxDBDnndddd\|(((
2.1	445	nn:0-9999
	446
	447	dddd:0-9999
	448	)))\|(((
	449	nn:DB No.
	450
	451	dddd:address value
	452
	453	Address value is a multiple of 4
	454	)))
	455
44.1	456	Configure the communication protocol
2.1	457
44.1	458	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_9e740a8bf83ea3bf.png\|\|alt="image-20220824163448-3.png" height="557" width="974"]]
2.1	459
	460	✎Note:
	461
	462	* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three V-BOX.
	463	* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
	464
44.1	465	Cable Wiring
2.1	466
44.1	467	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_ac8ece9a26719fda.png\|\|alt="image-20220824162342-2.png" height="170" width="401"]]
2.1	468
	469	== {{id name="HLOGOEthernet"/}}LOGO Ethernet ==
	470
	471	Supported Series: Siemens Logo 0BA0, 0BA1 series
	472
	473	V-BOX Settings
	474
	475	\|Items\|Settings\|Note
	476	\|Protocol\|Siemens LOGO\|
	477	\|Connection\|Ethernet\|
	478	\|Port No.\|102\|
	479	\|PLC station No.\|2\|
	480
	481	Address List
	482
	483	\|Number\|Address Type\|Data Type\|Range\|DB Address\|PLC Address
	484	\|1\|RTC\|Word\|1-7\|DB1.DBX984.0\|0x001ec0
	485	\|2\|VB\|Byte\|0-1469\|DB1.DBX0.0\|0x000000
	486	\|3\|VD\|Double Word\|0-1466\|DB1.DBX0.0\|0x000000
	487	\|4\|VW\|Word\|0-1468\|DB1.DBX0.0\|0x000000
	488	\|5\|NAQ\|Word\|1-32\|DB1.DBX1406.0\|0x002bf0
	489	\|6\|NAI\|Word\|1-64\|DB1.DBX1262.0\|0x002770
	490	\|7\|AM\|Word\|1-64\|DB1.DBX1118.0\|0x0022f0
	491	\|8\|AQ\|Word\|1-16\|DB1.DBX1072.0\|0x002180
	492	\|9\|AI\|Word\|1-16\|DB1.DBX1032.0\|0x002040
	493	\|10\|I\|Bit\|1-64\|DB1.DBX1024.0\|0x002000
	494	\|11\|Q\|Bit\|1-64\|DB1.DBX1064.0\|0x002140
	495	\|12\|M\|Bit\|1-112\|DB1.DBX1104.0\|0x002280
	496	\|13\|NI\|Bit\|1-128\|DB1.DBX1246.0\|0x0026f0
	497	\|14\|NQ\|Bit\|1-128\|DB1.DBX1390.0\|0x002b70
	498	\|15\|V\|Bit\|0-14697\|DB1.DBX0.0\|0x000000
	499
	500	PLC Settings in LOGO Software:
	501
	502	Click [Tools]~-~-[Ethernet Connections],shown as below.
	503
46.1	504	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d13df637bfedcc52.png\|\|alt="12.PLC Protocol_html_8b9d2322edf89519.png" height="641" width="423"]]
2.1	505
	506	Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
50.2	507
2.1	508
48.2	509	(% style="text-align:center" %)
50.2	510	[[image:1iZSZTpAdk.png]]
2.1	511
50.2	512	TSAP set: The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite, shown as below.
2.1	513
46.1	514	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_facc6ee1af05162f.png\|\|alt="image-20221228143047-5.png" height="626" width="1088"]]
2.1	515
	516	Download Project: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
	517
46.1	518	[[image:xwiki_V-BOX_V-Net_Training_1+Communication_WebHome_d43d2b7b2599ee64.png\|\|alt="image-20221228143246-6.png" height="698" width="688"]]
2.1	519
	520	V-BOX Communication Settings
	521
	522	Set PLC IP in [IP Address] settings;
	523
47.1	524	(% style="text-align:center" %)
48.1	525	[[image:V-NET_Client logo.png]]
2.1	526
	527	TSAP setting
	528
	529	* The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
	530
48.2	531	You can copy the following script into V-net directly.
	532
	533	(% class="box successmessage" %)
	534	(((
2.1	535	function init.main()
	536	addr_setword("@W_0#HSW1200",8192) //~-~- Set the source TSAP address//
	537	addr_setword("@W_0#HSW1201",4096) //~-~- Set the destination TSAP address//
17.1	538	end
48.2	539	)))
2.1	540
48.2	541	(% class="box infomessage" %)
	542	(((
	543	Note:
	544	The name of the test script must be “init”, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
	545	)))
2.1	546
	547	✎Note:
	548
	549	* Communication port configuration:
	550	** Continuous length needs to be set to 0.
	551	** Integration interval needs to be set to 1. (no change may result in data errors)
	552	** Set Port and Device Station NO.
	553	** Other set as defaulted.
	554	* Notes on the use of registers:
	555	** Register VD: Use only registers that are multiples of 4, such as 0, 4, 8, etc.
48.2	556	** Register VW: Use only registers they are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )

Wiki source code of Siemens

Navigation

Table of Contents