Changes for page 1 Communication

Last modified by Hunter on 2024/07/01 10:54

From 140.1 to 141.1 From 201.1 to 202.1

From version 141.1

edited by Ben
on 2022/08/31 09:45

Change comment: There is no comment for this version

To version 201.1

edited by Hunter
on 2023/01/15 16:36

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 60 added, 0 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Ben
++XWiki.Hunter

Content

@@ -178,14 +178,110 @@
  = Create communication with **Rockwell PLC** =
++== **DF1 Advanced Protocol** ==
++
++MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05; PLC-5
++
++**1) V-Box Settings**
++
++|=Item|=Recommended |=Note
++|=Protocol|Allen Bradley DF1 Advanced|
++|=Connection|RS232|
++|=Baud rate|19200|
++|=Stop bits|1|
++|=Data bits|8|
++|=Parity|None|
++|=PLC Station No.|1|
++|=HMI Station No.|0|
++
++**2) Address List**
++
++|=**Type**|=**Device registers**|=**Format**|=**Range**|=Note
++|(% colspan="1" rowspan="7" %)Bit|I1|I1ddd.dd|0.0~~255.15|Only able to communicate with file number I1
++|O0|O0ddd.dd|0.0~~255.15|Only able to communicate with file number O0
++|S2|S2ddd.dd|0.0~~255.15|Only able to communicate with file number S2
++|B3|B3ddd.dd|0.0~~255.15|Only able to communicate with file number B3
++|BN|BNddddd.dd|0.0~~99255.15|(((
++Bit data file B0~~B99
++
++First two digits is for file number
++
++For example, BN13001.00 represents file number B13, address 001, the 0th bit.
++)))
++|N7|N7ddd.dd|0.0~~255.15|Only able to communicate with file number N7
++|NN|NNddddd.dd|0.0~~99255.15|(((
++Integer data file bit format N0~~N99
++
++First two digits is for file number
++
++For example, NN13001.00 represents file number N13, address 001, the 0th bit.
++)))
++|(% rowspan="11" %)Word|S2|S2ddd|0~~255|Only able to communicate with file number S2
++|T4S|T4Sddd|0~~255|Only able to communicate with file number T4 (Timer Preset Value)
++|T4P|T4Pddd|0~~255|Only able to communicate with file number T4 (Timer Accumulator Value)
++|TNS|TNSddddd|0~~99255|(((
++Timer Preset Value
++
++First two digits is for file number
++
++For example, TNS99255 represents file number T99, address 255.
++)))
++|TNP|TNPddddd|0~~99255|(((
++Timer Accumulator Value
++
++First two digits is for file number
++
++For example, TNP99255 represents file number T99, address 255.
++)))
++|C5S|C5Sddd|0~~255|Only able to communicate with file number C5 (Counter Preset Value)
++|C5P|C5Pddd|0~~255|Only able to communicate with file number C5 (Counter Accumulator Value)
++|CNS|CNSddddd|0~~99255|(((
++Counter Preset Value
++
++First two digits is for file number
++
++For example, CNS99255 represents file number C99, address 255.
++)))
++|CNP|CNPddddd|0~~99255|(((
++Counter Accumulator Value
++
++First two digits is for file number
++
++For example, CNP99255 represents file number C99, address 255.
++)))
++|N7|N7ddd|0~~255|Only able to communicate with file number N7
++|NN|NNddd|0~~99255|(((
++Integer data file
++
++First two digits is for file number
++
++For example, NN99255 represents file number N99, address 255.
++)))
++|(% colspan="1" rowspan="3" %)Double Word|F8|F8ddd|0~~255|(((
++Only able to communicate with file number N7
++)))
++|FN|FNddddd|0~~99255|(((
++Floating point data file
++
++First two digits is for file number
++
++For example, FN99255 represents file number F99, address 255.
++)))
++|LN|LNddddd|0~~99255|Long
++
++**3) Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:ABRS232.gif]]
++
  == (% id="cke_bm_5621S" style="display:none" %)** **(%%)**MicroLogix Protocol** ==
  MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
--**1）PLC Settings**
++**1）V-BOX setting**
  |**Item**|**Settings**|**Note**
--|Protocol|Allen-Bradlley DF1 Advanced|
++|Protocol|Allen-Bradley DF1 Advanced|
  |Connection|RS232|
  |Baud rate|19200|
  |Data bit|8|
@@ -420,7 +420,7 @@
  The above are all the steps for establishing Ethernet communication between Wecon V-box with CompactLogix L1769 PLC.
--== **Allen-Bradley Ethernet DF1** ==
++= **Allen-Bradley Ethernet DF1** =
  [[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Allen-Bradley%20Ethernet%20DF1.zip]]
@@ -436,7 +436,7 @@
  Supported Series: Siemens S7-300 series PLC
--**1）PLC Setting**
++**1）V-BOX setting**
  |**Items**|**Settings**|**Note**
  |Protocol|Simens S7-300 Ethernet|
@@ -498,7 +498,7 @@
  Supported Series: Siemens S7-400, S7-1200 and S7-1500
--**1）PLC Setting**
++**1）V-BOX setting**
  |=**Items**|=**Settings**|=**Note**
  |Protocol|Siemens S7-XXX|
@@ -704,6 +704,101 @@
  [[image:image-20220825100845-4.png]]
++== **FX3U Ethernet Protocol** ==
++
++Supported Modules: FX3U-ENET-ADP, FX3U-ENET-L
++
++**1)V-BOX Settings**
++
++|Items|Settings|Note
++|Protocol|Mitsubishi FX3U|
++|Connection|Ethernet|
++|Port No.|5009|Must be the same as the PLC setting
++|PLC station No.|0|
++
++**2)Address List**
++
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|(% colspan="1" rowspan="7" %)Bit|X|X|X OOO|0~~377|
++|Y|Y|Y OOO|0~~377|
++|M|M|M DDDD|0~~7679|
++|SM|SM|SM DDDD|8000~~8511|
++|S|S|S DDDD|0~~4095|
++|TS|TS|TS DDD|0~~511|
++|CS|CS|CS DDD|0~~255|
++|(% colspan="1" rowspan="9" %)Word|CN|CN|CN DDD|0~~199|
++|TN|TN|TN DDD|0~~511|
++|D|D|D DDDD|0~~7999|
++|SD|SD|SD DDDD|8000~~8511|
++|R|R|R DDDDD|0~~32767|
++
++**3)Ethernet Module Settings**
++
++FX3U-ENET-L module configuration
++Set up the FX3U-ENET-L Ethernet module settings as follows.
++Select the module location, which in this document is Module 0.
++
++[[image:image-20221116105850-1.png]]
++
++Select "Operational setting" to enter the following screen.
++
++The Ethernet module IP is set to 192.168.39.254 in this document, and other options are default.
++
++[[image:image-20221116105947-1.png]]
++
++Select "Open setting" to enter the setting interface, the settings are as follows.
++
++The third item "Protocol" selects TCP, and "Open system" selects MELSOFT connection, which allows the
++
++Mitsubishi programming software GX works2 to communicate with the FX3U via the Ethernet module.
++
++[[image:image-20221116110802-1.png]]
++
++Click on "transter setup" - "PC side I/F setting", see the following figure.
++
++After setting, the first download must use the programming cable, as shown in the figure; after that, can
++
++use the IP set in the "Ethernet board" to communicate directly with the network cable.
++
++[[image:image-20221116110832-2.png||height="423" width="708"]]
++
++Read and write data from the Ethernet module
++
++[[image:image-20221116110907-3.png]]
++
++Set "Transter setup" to COM communication, and read or write operation as shown below
++
++[[image:image-20221116110917-4.png]]
++
++**4)PLC Settings (GX Works 2)**
++
++Create a blank FX5U project
++
++Find Current Connection in the navigation
++
++[[image:image-20221116111427-1.png||height="421" width="705"]]
++
++Select Connection Channel List
++
++Select Ethernet board communication
++
++[[image:image-20221116111451-2.png||height="421" width="705"]]
++
++Select Ethernet Module
++Set the IP address of the PLC
++
++[[image:image-20221116111509-3.png||height="666" width="699"]]
++
++Read or write PLC data, in this document is read
++
++[[image:image-20221116111651-4.png||height="416" width="697"]]
++
++[[image:image-20221116111727-5.png||height="416" width="697"]]
++
++**4)Configure the communication protocol**
++
++[[image:image-20221119101946-2.png||height="395" width="695"]]
++
  == **FX5U Serial Protocol** ==
  Mitsubishi FX5U series PLC
@@ -858,11 +858,10 @@
  [[image:image-20220825112403-1.png||alt="图片-20220825112403-1.png"]]
--**5）电缆布线**
++**5）Cable Wiring**
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--
  == **L02 Serial Protocol** ==
  Mitsubishi L02 series CPU built-in serial port.
@@ -996,6 +996,12 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
++== **Q12H Serial Protocol** ==
++
++This Demo shows V-BOX communicate with Q12H PLC by Q02H serial Protocol
++
++[[**Download link**>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Communication/V-Box%20connect%20PLC%20Q12H.rar]]
++
  == **QJ71E71 Ethernet Protocol** ==
  Mitsubishi QJ71E71 Ethernet communication module;
@@ -1044,10 +1044,13 @@
  * Click [Ethernet/CC IE/MELSECNET];
  * Please select [Ethernet] as network type;
--* Set station I/O number according to situation (For example, 0000 means that the module is connected to PLC CPU in first order);
++* Set station I/O number according to situation (For example, 0020 means that the module is connected to PLC CPU in first order);
  * Select [Online] as Mode;
++* [[image:image-20221119171343-2.png||height="341" width="587"]]
  * Click [Operation setting] to set IP;
  * Select [Binary Code] as [Communication Data Code];
++* [[image:image-20221119171436-3.png||height="354" width="588"]]
++* Click [Open setting]
  * Set protocol: TCP;
  * Set [unpassive] in [Open system];
  * Set [receive] in [Fixed buffer];
@@ -1054,14 +1054,16 @@
  * Set [procedure Exist] in [Fixed buffer communication];
  * Disable [Pairing open];
  * Set [No confirm] in [Existence confirmation];
--* Host station port number: 1025;
++* Host station port number: 5009;
  * Save settings;
++* [[image:image-20221119171611-4.png||height="354" width="588"]]
  * Download project into PLC and restart it
  **4）Configure the communication protocol**
--[[image:image-20220825143728-1.png]]
++[[image:image-20221119171832-5.png||height="354" width="625"]]
++
  **5）Cable Wiring**
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png"]]
@@ -1070,12 +1070,150 @@
  == **DVP Ethernet Protocol** ==
--[[下载链接>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
++Supoort Series: DELTA DVP20/32/40/60ES200RE/200TE or any DVP models with built-in Ethernet port, DELTA DVPEN01-SL module
++**1）V-BOX Settings**
++
++|=**Items**|=**Settings**|=**Note**
++|Protocol|DELTA DVP MODBUS TCP|
++|Connection|Ethernet|
++|Port No.|502|
++|Device No.|1|
++|VBox Device No.|0|
++
++**2）Address List **
++
++|=**Type**|=(% style="width: 191px;" %)**Device registers**|=(% style="width: 217px;" %)**VBox registers**|=(% style="width: 168px;" %)**Format**|=(% style="width: 225px;" %)**Range**|=**Note**
++|Bit|(% style="width:191px" %)X|(% style="width:217px" %)X|(% style="width:168px" %)X OOO|(% style="width:225px" %)0~~377|
++|Bit|(% style="width:191px" %)Y|(% style="width:217px" %)Y|(% style="width:168px" %)Y OOO|(% style="width:225px" %)0~~377|
++|Bit|(% style="width:191px" %)M0|(% style="width:217px" %)M0|(% style="width:168px" %)M0DDDD|(% style="width:225px" %)0~~1535|
++|Bit|(% style="width:191px" %)M1|(% style="width:217px" %)M1|(% style="width:168px" %)M1DDDD|(% style="width:225px" %)1536~~4096|
++|Bit|(% style="width:191px" %)T|(% style="width:217px" %)T|(% style="width:168px" %)TDDD|(% style="width:225px" %)0~~255|
++|Bit|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDD|(% style="width:225px" %)0~~255|
++|Bit|(% style="width:191px" %)S|(% style="width:217px" %)S|(% style="width:168px" %)SDDDD|(% style="width:225px" %)0~~1023|
++|Word|(% style="width:191px" %)D0|(% style="width:217px" %)D0|(% style="width:168px" %)D0DDDD|(% style="width:225px" %)0~~4095|
++|Word|(% style="width:191px" %)D1|(% style="width:217px" %)D1|(% style="width:168px" %)D1DDDD|(% style="width:225px" %)4096~~11999|
++|Word|(% style="width:191px" %)T|(% style="width:217px" %)T|(% style="width:168px" %)TDDD|(% style="width:225px" %)0~~255|
++|Word|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDD|(% style="width:225px" %)0~~199|
++|Double Word|(% style="width:191px" %)HC|(% style="width:217px" %)HC|(% style="width:168px" %)HCDDD|(% style="width:225px" %)200~~255|
++
++**3) PLC Setting:**
++
++~1. Create new project in Delta WPL Soft, and click Setting to open the communication settings:
++
++(% style="text-align:center" %)
++[[image:DVPEthernetWPLSoft2.png]]
++
++2. Set up the communication type and PLC IP:
++
++(% style="text-align:center" %)
++[[image:DVPEthernetSetup.png]]
++
++(% class="wikigeneratedid" %)
++3. Click OK and save the settings. Then click Communication on toolbar, then click Transfer Setup to open new window:
++
++(% style="text-align:center" %)
++[[image:DVPEthernetTransfer.png]]
++
++(% class="wikigeneratedid" %)
++4. Select Communication Mode as PC => PLC to download or select PC <=PLC to upload:
++
++(% style="text-align:center" %)
++[[image:DVPEthernetPLCtoPC.png]]
++
++5. Click Auto-Search Ethernet Module to find the PLC on the same LAN network:
++
++(% style="text-align:center" %)
++[[image:DVPEthernetAutoSearch.png]]
++
++**4) V-BOX Setting:**
++
++Set the same IP address according to the setting from WPL Soft:
++
++(% style="text-align:center" %)
++[[image:DVPEthernetVNETPortocol.png]]
++
  == **DVP serial protocol** ==
--[[下载链接>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
++Supoort Series: DELTA DVP EH/ES/SS/EX/EH2/SV/SA/SC/SX
++**1）V-BOX Settings**
++
++|=**Items**|=**Settings**|=**Note**
++|Protocol|DELTA DVP PROTOCOL|
++|Connection|RS232|
++|Baud Rate|9600|
++|Stop Bit|1|
++|Data Bit|7|
++|Parity|EVEN|
++|Device No.|1|
++
++(% class="wikigeneratedid" %)
++**2）Address List**
++
++|=**Type**|=(% style="width: 191px;" %)**Device registers**|=(% style="width: 217px;" %)**VBox registers**|=(% style="width: 168px;" %)**Format**|=(% style="width: 225px;" %)**Range**|=**Note**
++|Bit|(% style="width:191px" %)X|(% style="width:217px" %)X|(% style="width:168px" %)X OOOOOO|(% style="width:225px" %)0~~303237|
++|Bit|(% style="width:191px" %)Y|(% style="width:217px" %)Y|(% style="width:168px" %)Y OOOOOO|(% style="width:225px" %)0~~303237|
++|Bit|(% style="width:191px" %)M|(% style="width:217px" %)M|(% style="width:168px" %)MDDDDD|(% style="width:225px" %)0~~99999|
++|Bit|(% style="width:191px" %)T|(% style="width:217px" %)T|(% style="width:168px" %)TDDDDD|(% style="width:225px" %)0~~99999|
++|Bit|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDDDD|(% style="width:225px" %)0~~99999|
++|Bit|(% style="width:191px" %)S|(% style="width:217px" %)S|(% style="width:168px" %)SDDDDD|(% style="width:225px" %)0~~99999|
++|Word|(% style="width:191px" %)D|(% style="width:217px" %)D|(% style="width:168px" %)D DDDDD|(% style="width:225px" %)0~~99999|
++|Word|(% style="width:191px" %)T|(% style="width:217px" %)T|(% style="width:168px" %)TDDDDD|(% style="width:225px" %)0~~99999|
++|Word|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDD|(% style="width:225px" %)0~~199|
++|Double Word|(% style="width:191px" %)C|(% style="width:217px" %)C|(% style="width:168px" %)CDDDDD|(% style="width:225px" %)200~~99999|
++
++(% class="wikigeneratedid" %)
++**3）Wiring Diagram**
++
++(% style="text-align:center" %)
++[[image:Delta DVP PROTOCOLSerial232.png]]
++
++== **AS Ethernet Protocol** ==
++
++**1）V-BOX Settings**
++
++|=**Items**|=**Settings**|=**Note**
++|Protocol|DELTA AS300 MODBUS TCP|
++|Connection|Ethernet|
++|Port No.|502|
++|Device No.|1|
++|HMI No.|0|
++
++**2）Address List**
++
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|X|X|X d|0~~63|
++|Bit|Y|Y|Y d|0~~63|
++|Bit|D|D|D d|0~~29999|
++|Bit|M|M|M d|0~~8191|
++|Bit|SM|SM|SM d|0~~4095|
++|Bit|S|S|S h|0~~2047|
++|Bit|T|T|T d|0~~511|
++|Bit|C|C|C d|0~~511|
++|Bit|HC|HC|HC d|0~~255|
++|Word|X|X|X h|0~~63|
++|Word|Y|Y|Y d|0~~63|
++|Word|SR|SR|SR d|0~~2047|
++|Word|D|D|D d|0~~29999|
++|Word|T|T|T d|0~~511|
++|Word|C|C|C h|0~~511|
++|Word|E|E|E d|0~~9|
++
++**3）Configure the communication protocol**
++
++[[image:image-20220831160010-4.png]]
++
++**4）Cable Wiring**
++
++Figure
++
++[[image:image-20220831155101-1.png]][[image:image-20220831160055-5.png]]
++
++Pin Definition Diagram
++
++[[image:image-20220831155157-3.png]]
++
  = Create communication with **Omron PLC** =
  == **CP1 Series Protocol ** ==
@@ -1086,10 +1086,423 @@
  [[下载链接>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CJ2M.zip]]
--= Create communication with **Modbus RTU** =
--== **V-BOX as Slave** ==
++== **EC55 Series Protocol** ==
++Supported device: EC55 temperature instrument
++
++**1）V-BOX Settings**
++
++|**Items**|**Settings**|**Note**
++|Protocol|Omron EC55|
++|Connection|RS485 (9600, 2, 7, EVEN)|
++|Port No.|None|
++|PLC station No.|0|
++
++**2）Address List**
++
++|**Type**|**Register**|**Device range**|**HMI range**|**Function**
++|(% rowspan="3" %)Double word|C0|0-13 (Hex)|0-19|Set read only parameter for area 0
++|C1|0-4D(Hex)|0-77|Set Read/Write parameter for area 0
++|C3|0-CD(Hex)|0-205|Set Read/Write parameter for area 1
++|(% rowspan="6" %)Word|80|0-13(Hex)|0-19|Set read only parameter in area 0
++|81|0-4D(Hex)|0-77|Set Read/Write parameter in area 0
++|83|0-CD(Hex)|0-205|Set Read/Write parameter in area 1
++|CP|-|0-6|Read controller intrinsic property
++|CS|-|0-2|Read controller states
++|CA|-|0-17|Action command
++
++**3）Device Settings**
++
++Omron E5CC PLC configuration
++
++After entering the Communication Settings menu, please set the parameters to the default values for the following table. Press the cycle key of the instrument to enter the next setting.
++
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_3d95e093792ba98a.png?width=550&height=229&rev=1.1||alt="12.PLC Protocol_html_3d95e093792ba98a.png" height="229" width="550"]]
++
++According to PLC configuration and communication port configuration information of the HMI, provide the corresponding steps and configuration screenshots. This configuration needs to communicate properly with the above PLC configuration. The project settings are as follows
++
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_be583aa69dd6cf4c.png?width=550&height=242&rev=1.1||alt="12.PLC Protocol_html_be583aa69dd6cf4c.png" height="242" width="550"]]
++
++**✎Note:** The communication settings for HMI should be consistent with this setting.
++
++**4）Configure the communication protocol**
++
++[[image:image-20220831161041-1.png]]
++
++**5）Cable Wiring**
++
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5e9a81a14106da9e.png?width=392&height=223&rev=1.1||alt="12.PLC Protocol_html_5e9a81a14106da9e.png" height="223" width="392"]]
++
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_1897d92be6948d58.png?width=393&height=223&rev=1.1||alt="12.PLC Protocol_html_1897d92be6948d58.png" height="223" width="393"]]
++
++**✎Note:**
++
++* COM3 only available in PI8000/PI9000 series.
++* CA address could not support continuous writing function；
++* Because of CP address intrinsic property: read control intrinsic property, so please place the character input part in use. Set address with CP0 and character length 10, used to display controller type. And place a number input part, set address with CP5 (cache size). Do not place other CP type address without CP0 in screen, otherwise CP type address is invalid
++* When set value into read & write address, it is necessary to switch the temperature instrument meter to the corresponding interface according to the menu of the instrument where the address locates, so that the value could be written, otherwise, the value could not be written; When the communication write setting of the instrument is turned off, the writing function is invalid. Writing function could be opened by using the 00 address of the CA register, which write 01 value.
++* When continuous writing of a value to a read-write address, please make sure all continuous writing address could be written. Otherwise, if one of these addresses could not be written, then all continuous writing commands will fail.
++* Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
++* When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
++* Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
++* [[image:image-20220831161356-1.png]]Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
++
++= Create communication with Xinje** PLC** =
++
++== **XC serial protocol** ==
++
++**1）V-BOX Settings**
++
++|**Item**|**Settings**|**Note**
++|Protocol|XINJE XC MODBUS|
++|Connection|RS232|
++|Baud rate|19200|
++|Data bit|8|
++|Parity|EVEN|
++|Stop bit|1|
++|PLC station No.|1|
++
++**2）Address List**
++
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|M|M|M d|0~~8511|
++|Bit|X|X|X o|0~~1747|
++|Bit|Y|Y|Y o|0~~1747|
++|Bit|S|S|S d|0~~1023|
++|Bit|T|T|T d|0~~4095|
++|Bit|C|C|C d|0~~634|
++|Word|D|D|D d|0~~8511|
++|Word|TD|TD|TD d|0~~618|
++|Word|CD|CD|CD d|0~~634|
++|Word|FD|FD|FD d|0~~8511|
++
++**3）Configure the communication protocol**
++
++
++[[image:image-20220831163041-1.png]]
++
++**4）Cable Wiring**
++
++Figure
++
++[[image:image-20220831163406-2.png]][[image:image-20220831163422-3.png]]
++
++Pin Definition Diagram
++
++[[image:image-20220831163441-4.png]]
++
++== **XD serial protocol** ==
++
++**1）V-BOX Settings**
++
++Supported Series: Xinjie XD/XE Series PLC
++
++|**Item**|**Settings**|**Note**
++|Protocol|XINJE XD/XC MODBUS|
++|Connection|RS232|
++|Baud rate|19200|
++|Data bit|8|
++|Parity|EVEN|
++|Stop bit|1|
++|PLC station No.|1|
++
++**2）Address List**
++
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|M|M|M d|0~~74999|
++|Bit|X1xx|X1xx|X1xx o|0~~1177|
++|Bit|X2xx|X2xx|X2xx o|0~~277|
++|Bit|X|X|X o|0~~77|
++|Bit|Y1xx|Y1xx|Y1xx o|0~~1177|
++|Bit|Y2xx|Y2xx|Y2xx o|0~~277|
++|Bit|Y|Y|Y o|0~~4095|
++|Bit|SM|SM|SM d|0~~4999|(((
++
++)))
++|Bit|T|T|T d|0~~4999|
++|Bit|C|C|C d|0~~4999|
++|Bit|ET|ET|ET d|0~~31|
++|Bit|SE|SE|SE d|0~~31|
++|Bit|HM|HM|HM d|0~~11999|
++|Bit|HSC|HSC|HSC d|0~~39|
++|Bit|HS|HS|HS d|0~~999|
++|Bit|HT|HT|HT d|0~~1999|
++|Bit|HC|HC|HC d|0~~1999|
++|Bit|S|S|S d|0~~7999|
++|Word|D|D|D d|0~~69999|
++|Word|ID|ID|ID d|0~~99|
++|Word|ID1xx|ID1xx|ID1xx d|0~~999|
++|Word|ID2xx|ID2xx|ID2xx d|0~~299|
++|Word|QD|QD|QD d|0~~99|
++|Word|QD1xx|QD1xx|QD1xx d|0~~999|
++|Word|QD2xx|QD2xx|QD2xx d|0~~299|
++|Word|SD|SD|SD d|0~~4999|
++|Word|TD|TD|TD d|0~~575|
++|Word|CD|CD|CD d|0~~575|
++|Word|ETD|ETD|ETD d|0~~31|
++|Word|HD|HD|HD d|0~~24999|
++|Word|HSD|HSD|HSD d|0~~1023|
++|Word|HTD|HTD|HTD d|0~~95|
++|Word|HCD|HCD|HCD d|0~~95|
++|Word|HSCD|HSCD|HSCD d|0~~31|
++|Word|FD|FD|FD d|0~~8191|
++|Word|SFD|SFD|SFD d|0~~5999|
++|Word|FS|FS|FS d|0~~47|
++
++**3）Configure the communication protocol**
++
++[[image:image-20220831163923-7.png]]
++
++
++
++**4）Cable Wiring**
++
++Figure
++
++[[image:image-20220831163406-2.png]][[image:image-20220831163553-6.png]]
++
++Pin Definition Diagram
++
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/image-20220830160232-3.png?rev=1.1||alt="image-20220830160232-3.png"]]
++
++= Create communication with **Schneider PLC** =
++
++== **Schneider MODBUS RTU** ==
++
++**1）V-BOX Setting**
++
++|=**Parameters**|=**Recommended**|=**Notes**
++|**Protocol**|(% colspan="1" %)Schneider MODBUS RTU|
++|**Connection**|RS485|
++|**Baud rate**|19200|
++|**Data bit**|8|
++|**Parity**|Even|
++|**Stop bit**|1|
++|**PLC station No.**|1|
++
++**2）Address List**
++
++|=**Bit/Word**|=**Device type**|=**Format**|=**Range**|=**Memo**
++|B|IX|DDDDDo|0 ~~ 655357|Input bit (read only)
++|B|QX|DDDDDo|0 ~~ 655357|Write multiple coils
++|B|MX|DDDDDDo|0 ~~ 9999997|Output register bit (octal)
++|W|MW|DDDDDD|0 ~~ 999999|Output register
++|DW|MD|DDDDDD|0 ~~ 999999|Output register
++
++**3）Configure the communication protocol**
++
++[[image:image-20220902104329-1.png]]
++
++**4）Cable Wiring**
++
++**RS-485 2W **(RJ45 Connector): The following is the view from the soldering point of a connector.
++
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/image-20220817154212-1.jpeg?width=554&height=315&rev=1.1||alt="image-20220817154212-1.jpeg" height="315" width="554"]]
++
++= Create communication with Inovance** PLC** =
++
++== **H3U serial protocol** ==
++
++**1）V-BOX Settings**
++
++|**Item**|**Settings**|**Note**
++|Protocol|INOVANCE H3U PLC|
++|Connection|RS422|
++|Baud rate|9600|
++|Data bit|7|
++|Parity|EVEN|
++|Stop bit|1|
++|PLC station No.|0|
++
++**2）Address List**
++
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|X|X|X o|0~~303237|
++|Bit|Y|Y|Y o|0~~303237|
++|Bit|M|M|M d|0~~99999|
++|Bit|T|T|T d|0~~99999|
++|Bit|C|C|C d|0~~99999|
++|Bit|SM|SM|SM d|8000~~999|
++|Bit|S|T|S d|0~~99999|
++|Bit|Lamp|Lamp|Lamp d|0~~0|
++|Word|X|X|X o|0~~303237|
++|Word|Y|Y|Y o|0~~303237|
++|Word|M|M|M d|0~~99999|
++|Word|T|T|T d|0~~99999|
++|Word|C|C|C d|0~~199|
++|Word|D|D|D d|0~~7999|
++|Word|S|S|S d|0~~99999|
++|Word|SD|SD|SD d|8000~~9999|
++|Word|R|R|R d|0~~32767|
++
++**3）Configure the communication protocol**
++
++[[image:image-20220831164626-1.png]]
++
++
++
++**4）Cable Wiring**
++
++Figure
++
++[[image:image-20220831164646-2.png]][[image:image-20220831164700-3.png]]
++
++Pin Definition Diagram
++
++[[image:image-20220831164731-4.png]]
++
++= Create communication with Panasonic** PLC** =
++
++== **FP serial protocol** ==
++
++**1）V-BOX Settings**
++
++|**Item**|**Settings**|**Note**
++|Protocol|Panasonic FP MFWTOCOL|
++|Connection|RS232|
++|Baud rate|9600|
++|Data bit|8|
++|Parity|ODD|
++|Stop bit|1|
++|PLC station No.|1|
++
++**2）Address List**
++
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|X|X|X d|0~~9999|
++|Bit|Y|Y|Y d|0~~9999|
++|Bit|R|R|R d|0~~9999|
++|Bit|T|T|T d|0~~9999|
++|Bit|C|C|C d|0~~9999|
++|Bit|L|L|L d|0~~9999|
++|Word|WX|WX|WX d|0~~9999|
++|Word|WY|WY|WY d|0~~9999|
++|Word|WR|WR|WR d|0~~9999|
++|Word|WL|WL|WL d|0~~9999|
++|Word|LD|LD|LD d|0~~9999|
++|Word|DT|DT|DT d|0~~65535|
++|Word|FL|FL|FL d|0~~9999|
++|Word|EV|EV|EV d|0~~9999|
++|Word|SV|SV|SV d|0~~9999|
++
++**3）Configure the communication protocol**
++
++[[image:image-20220831165238-4.png]]
++
++
++
++**4）Cable Wiring**
++
++Figure
++
++[[image:image-20220831165031-3.png]][[image:image-20220831165017-2.png]]
++
++Pin Definition Diagram
++
++[[image:image-20220831165008-1.png]]
++
++= Create communication with LS** PLC** =
++
++== **XBC serial protocol** ==
++
++**1）V-BOX Settings**
++
++|**Item**|**Settings**|**Note**
++|Protocol|LS XBC CNet|
++|Connection|RS232|
++|Baud rate|115200|
++|Data bit|8|
++|Parity|NONE|
++|Stop bit|1|
++|PLC station No.|1|
++
++**2）Address List**
++
++|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
++|Bit|P|P|P d|0~~2047|
++|Bit|M|M|M d|0~~2047|
++|Bit|L|L|L d|0~~11263|
++|Bit|K|K|K d|0~~16183|
++|Bit|F|F|F d|0~~2047|
++|Bit|D|D|D d|0~~32767|
++|Bit|R|R|R d|0~~32767|
++|Bit|U|U|U d|0~~4095|
++|Word|P|P|P d|0~~2047|
++|Word|M|M|M d|0~~2047|
++|Word|L|L|L d|0~~11263|
++|Word|K|K|K d|0~~16183|
++|Word|F|F|F d|0~~2047|
++|Word|C|C|C d|0~~2047|
++|Word|T|T|T d|0~~2047|
++|Word|D|D|D d|0~~32767|
++|Word|N|N|N d|0~~21503|
++|Word|R|R|R d|0~~32767|
++|Word|U|U|U d|0~~4095|
++|Word|Z|Z|Z d|0~~127|
++|Word|S|S|S d|0~~127|
++
++**3）Configure the communication protocol**
++
++[[image:image-20220831170147-1.png]]
++
++**4）Cable Wiring**
++
++Figure
++
++[[image:image-20220831170306-4.png]][[image:image-20220831170254-3.png]]
++
++Pin Definition Diagram
++
++[[image:image-20220831170215-2.png]]
++
++== **XGK FEnet Ethernet protocol** ==
++
++Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
++
++**1）V-BOX Settings**
++
++|**Items**|**Settings**|**Note**
++|Protocol|LG XGK FEnet(Ethernet)|
++|Connection|Ethernet|
++|Port No.|2004|
++
++**2）Address List**
++
++|**Type**|**Register**|**Range**|**Format**|**Note**
++|(% rowspan="14" %)Word|P|0~~2047|P d|
++|M|0~~2047|M d|
++|K|0~~2047|K d|
++|F|0~~2047|F d|
++|T|0~~2047|T d|
++|C|0~~2047|C d|
++|Z|0~~127|Z d|
++|S|0~~127|S d|
++|L|0~~11263|L d|
++|N|0~~21503|N d|
++|D|0~~32767|D d|
++|R|0~~32767|R d|
++|ZR|0~~65535|ZR d|
++|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
++
++**✎Note:**
++
++* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
++* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
++* All bit registers are in the form of bits in word, and the range is the same as the word register;
++
++**3）Communication Settings**
++
++[[image:image-20220831171127-1.png]]
++
++**4）Cable Wiring**
++
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
++
++= Create communication with **Modbus ** =
++
++== **MODBUS RTU Slave (All function)** ==
++
  Select the protocol "Modbus RTU Slave (All Fuction)",
  Then set baud rate, port, stop bits, data bits, parity.
@@ -1097,7 +1097,7 @@
  (% style="text-align:center" %)
  [[image:1624342015914-382.png||height="486" width="800" class="img-thumbnail"]]
--== **V-BOX as Master** ==
++== **MODBUS RTU Master** ==
  Select the protocol "Modbus RTU Master",
@@ -1109,8 +1109,8 @@
  **address list**
  (% class="table-bordered" %)
--|**type**|**register**|**Function code and description**
--|(% rowspan="11" %)词|(% rowspan="3" %)3|04 (Read Input Registers: Read the current binary value in one or more input registers)
++|=(% scope="row" %)**Type**|=**Data Type**|=**Function code and description**
++|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (Read Input Registers: Read the current binary value in one or more input registers)
  |06 (write single register: write a binary value to a holding register)
  |10 (write values to multiple addresses )
  |(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
@@ -1133,6 +1133,61 @@
  |(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
  |0F (Write multiple bits)
++== **MODBUS TCP Slave (All function)** ==
++
++Supported series: MODBUS TCP controller
++
++V-B0X works as MODBUS TCP MASTER connecting with TCP SLAVE
++
++**1）V-BOX Setting**
++
++|**Items**|**Settings**|**Note**
++|Protocol|MODBUS TCP Slave (All function)|
++|Connection|Ethernet|
++|Port No.|502|
++|PLC station No.|1
++
++**2）Address List**
++
++|=**Type**|=**Data Type**|=**Function code & Description**
++|(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
++|06 (write single register: write a binary value to a holding register)
++|10 (write values to multiple addresses )
++|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
++|06 (write single register: write a binary value to a holding register)
++|10 (write values to multiple addresses )
++|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
++|06 (write single register: write a binary value to a holding register)
++|10 (write values to multiple addresses )
++|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
++|10 (write values to multiple addresses )
++|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
++|05 (Force a single coil to force the on/off state of a logic coil)
++|0F (Write multiple bits, ie write continuously)
++|(% rowspan="3" %)1|02 (Read the input state)
++|05 (Force a single coil to force the on/off state of a logic coil)
++|0F (Write multiple bits)
++|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
++|05 (Force a single coil to force the on/off state of a logic coil)
++|0F (Write multiple bits)
++|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
++|0F (Write multiple bits)
++
++**3）Communication Settings**
++
++Configure V-BOX Ethernet IP in Networking Settings
++
++[[image:image-20220902111833-3.png]]
++
++
++Configure PLC Ethernet IP in Communication；
++
++[[image:image-20220902111121-1.png]]
++
++**4）Cable Wiring**
++
++[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
++
  == **communicate with VB inverter** ==
  [[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20VB%20inverter.zip]]

AB.gif

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+7.3 KB

Content

ABRS232.gif

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+7.3 KB

Content

DVPEthernetAutoSearch.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+43.6 KB

Content

DVPEthernetPLCtoPC.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+8.9 KB

Content

DVPEthernetSetup.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+19.9 KB

Content

DVPEthernetTransfer.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+59.9 KB

Content

DVPEthernetVNETPortocol.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+21.4 KB

Content

DVPEthernetWPLSoft.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+97.5 KB

Content

DVPEthernetWPLSoft2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+45.2 KB

Content

Delta DVP PROTOCOLSerial232.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+10.7 KB

Content

image-20220831155101-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.6 KB

Content

image-20220831155129-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+44.9 KB

Content

image-20220831155157-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.8 KB

Content

image-20220831160010-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+59.6 KB

Content

image-20220831160055-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+51.5 KB

Content

image-20220831161041-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+58.1 KB

Content

image-20220831161356-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+27.0 KB

Content

image-20220831163041-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+58.6 KB

Content

image-20220831163406-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.4 KB

Content

image-20220831163422-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+53.9 KB

Content

image-20220831163441-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+13.7 KB

Content

image-20220831163548-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+37.1 KB

Content

image-20220831163553-6.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+37.1 KB

Content

image-20220831163923-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+57.3 KB

Content

image-20220831164626-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+56.1 KB

Content

image-20220831164646-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.4 KB

Content

image-20220831164700-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+66.6 KB

Content

image-20220831164731-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.3 KB

Content

image-20220831165008-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+13.3 KB

Content

image-20220831165017-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.2 KB

Content

image-20220831165031-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.3 KB

Content

image-20220831165238-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+57.4 KB

Content

image-20220831170147-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+57.1 KB

Content

image-20220831170215-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+14.3 KB

Content

image-20220831170254-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+43.5 KB

Content

image-20220831170306-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+28.5 KB

Content

image-20220831171127-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+60.1 KB

Content

image-20220902104329-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+58.7 KB

Content

image-20220902111121-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+60.9 KB

Content

image-20220902111754-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+57.6 KB

Content

image-20220902111833-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Ben

Size

...	...	@@ -1,0 +1,1 @@
	1	+56.1 KB

Content

image-20221116105850-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+18.9 KB

Content

image-20221116105947-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+18.7 KB

Content

image-20221116110802-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+16.4 KB

Content

image-20221116110832-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+42.2 KB

Content

image-20221116110907-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+17.8 KB

Content

image-20221116110917-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+23.2 KB

Content

image-20221116111427-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+63.4 KB

Content

image-20221116111451-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+225.5 KB

Content

image-20221116111509-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+34.1 KB

Content

image-20221116111651-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+74.3 KB

Content

image-20221116111727-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+106.2 KB

Content

image-20221116114106-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+99.5 KB

Content

image-20221119101759-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+62.1 KB

Content

image-20221119101946-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+68.7 KB

Content

image-20221119171318-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+90.3 KB

Content

image-20221119171343-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+90.3 KB

Content

image-20221119171436-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+43.4 KB

Content

image-20221119171611-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+23.1 KB

Content

image-20221119171832-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+69.6 KB

Content

Changes for page 1 Communication

Summary

Details

Navigation

Table of Contents