Skip to Content

Changes for page 1 Communication

Last modified by Hunter on 2024/07/01 10:54
From version 191.1
edited by Bob
on 2022/12/01 11:02
Change comment: There is no comment for this version
To version 111.1
edited by Ben
on 2022/08/25 11:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bob
1 +XWiki.Ben
Content
... ... @@ -1,10 +1,10 @@
1 -= Create communication with WECON PLC =
1 += (% style="color:inherit; font-family:inherit" %)**WECON PLC**(%%) =
2 2  
3 -== **LX3V Serial Protocol** ==
3 +== **LX3V Serial Protocol** ==
4 4  
5 -Supported series: Wecon LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM
5 +Supported series: WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM
6 6  
7 -**1）V-BOX setting**
7 +**1）PLC Settings**
8 8  
9 9  |**Item**|**Settings**|**Note**
10 10  |Protocol|WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM|
... ... @@ -15,9 +15,8 @@
15 15  |Stop bit|1|
16 16  |PLC station No.|1|
17 17  
18 -**2）Address List**
18 +**2）PLC Address List**
19 19  
20 -
21 21  |**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
22 22  |(% rowspan="6" %)Bit|X|X|Xo|0~~303237|
23 23  |Y|Y|Y o|0~~303237|
... ... @@ -36,9 +36,9 @@
36 36  
37 37  **3）Configure the communication protocol**
38 38  
39 -[[image:image-20220824152217-1.png||alt="图片-20220824152217-1.png"]]
38 +[[image:image-20220824152217-1.png]]
40 40  
41 -**4）Cable Wiring**
40 +**4）hardware connection**
42 42  
43 43  * **RS422**
44 44  
... ... @@ -176,13 +176,13 @@
176 176  
177 177  The above are all the steps for establishing ethernet communication between V-BOX with LX5V PLC.
178 178  
179 -= Create communication with **Rockwell PLC** =
178 += **Rockwell PLC** =
180 180  
181 181  == (% id="cke_bm_5621S" style="display:none" %)** **(%%)**MicroLogix Protocol** ==
182 182  
183 183  MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
184 184  
185 -**1）V-BOX setting**
184 +**1）PLC Settings**
186 186  
187 187  |**Item**|**Settings**|**Note**
188 188  |Protocol|Allen-Bradlley DF1 Advanced|
... ... @@ -217,7 +217,7 @@
217 217  
218 218  [[image:image-20220824110724-1.png]]
219 219  
220 -== **Micro850_FreeTag Protocol** ==
219 +== **CompactLogix Protocol** ==
221 221  
222 222  (((
223 223  (((
... ... @@ -356,7 +356,7 @@
356 356  
357 357  (((
358 358  (((
359 -Open VNET client software → add device. As shown in the figure below, click "+" in the order of steps, and the Add Device window will pop up, enter the device machine code/product code, device password, and device alias to add the device.   [[image:image-20220714162752-8.png]]
358 +Open VNET client software → add device. As shown in the figure below, click "+" in the order of steps, and the Add Device window will pop up, enter the device machine code/product code, device password, and device alias to add the device.   [[image:image-20220714162752-8.png]]
360 360  )))
361 361  
362 362  
... ... @@ -420,12 +420,12 @@
420 420  The above are all the steps for establishing Ethernet communication between Wecon V-box with CompactLogix L1769 PLC.
421 421  
422 422  
423 -= **Allen-Bradley Ethernet DF1** =
422 +== **Allen-Bradley Ethernet DF1** ==
424 424  
425 425  [[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Allen-Bradley%20Ethernet%20DF1.zip]]
426 426  
427 427  
428 -= Create communication with **Siemens PLC** =
427 += **Siemens PLC** =
429 429  
430 430  == **S7-200 Smart Ethernet Protocol** ==
431 431  
... ... @@ -436,7 +436,7 @@
436 436  
437 437  Supported Series: Siemens S7-300 series PLC
438 438  
439 -**1）V-BOX setting**
438 +**1）PLC Setting**
440 440  
441 441  |**Items**|**Settings**|**Note**
442 442  |Protocol|Simens S7-300 Ethernet|
... ... @@ -498,7 +498,7 @@
498 498  
499 499  Supported Series: Siemens S7-400, S7-1200 and S7-1500
500 500  
501 -**1）V-BOX setting**
500 +**1）PLC Setting**
502 502  
503 503  |=**Items**|=**Settings**|=**Note**
504 504  |Protocol|Siemens S7-XXX|
... ... @@ -608,8 +608,9 @@
608 608  
609 609  [[image:image-20220824162342-2.png]]
610 610  
611 -= Create communication with **Mitsubishi PLC** =
612 612  
611 += **Mitsubishi PLC** =
612 +
613 613  == **FX1S，1N，2N Serial Protocol** ==
614 614  
615 615  Supported Series: Mitsubishi FX1S, FX1N, FX2N series
... ... @@ -704,101 +704,6 @@
704 704  [[image:image-20220825100845-4.png]]
705 705  
706 706  
707 -== **FX3U Ethernet Protocol** ==
708 -
709 -Supported Modules: FX3U-ENET-ADP, FX3U-ENET-L
710 -
711 -**1)V-BOX Settings**
712 -
713 -|Items|Settings|Note
714 -|Protocol|Mitsubishi FX3U|
715 -|Connection|Ethernet|
716 -|Port No.|5009|Must be the same as the PLC setting
717 -|PLC station No.|0|
718 -
719 -**2)Address List**
720 -
721 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
722 -|(% colspan="1" rowspan="7" %)Bit|X|X|X OOO|0~~377|
723 -|Y|Y|Y OOO|0~~377|
724 -|M|M|M DDDD|0~~7679|
725 -|SM|SM|SM DDDD|8000~~8511|
726 -|S|S|S DDDD|0~~4095|
727 -|TS|TS|TS DDD|0~~511|
728 -|CS|CS|CS DDD|0~~255|
729 -|(% colspan="1" rowspan="9" %)Word|CN|CN|CN DDD|0~~199|
730 -|TN|TN|TN DDD|0~~511|
731 -|D|D|D DDDD|0~~7999|
732 -|SD|SD|SD DDDD|8000~~8511|
733 -|R|R|R DDDDD|0~~32767|
734 -
735 -**3)Ethernet Module Settings**
736 -
737 -FX3U-ENET-L module configuration
738 -Set up the FX3U-ENET-L Ethernet module settings as follows.
739 -Select the module location, which in this document is Module 0.
740 -
741 -[[image:image-20221116105850-1.png]]
742 -
743 -Select "Operational setting" to enter the following screen.
744 -
745 -The Ethernet module IP is set to 192.168.39.254 in this document, and other options are default.
746 -
747 -[[image:image-20221116105947-1.png]]
748 -
749 -Select "Open setting" to enter the setting interface, the settings are as follows.
750 -
751 -The third item "Protocol" selects TCP, and "Open system" selects MELSOFT connection, which allows the
752 -
753 -Mitsubishi programming software GX works2 to communicate with the FX3U via the Ethernet module.
754 -
755 -[[image:image-20221116110802-1.png]]
756 -
757 -Click on "transter setup" - "PC side I/F setting", see the following figure.
758 -
759 -After setting, the first download must use the programming cable, as shown in the figure; after that, can
760 -
761 -use the IP set in the "Ethernet board" to communicate directly with the network cable.
762 -
763 -[[image:image-20221116110832-2.png||height="423" width="708"]]
764 -
765 -Read and write data from the Ethernet module
766 -
767 -[[image:image-20221116110907-3.png]]
768 -
769 -Set "Transter setup" to COM communication, and read or write operation as shown below
770 -
771 -[[image:image-20221116110917-4.png]]
772 -
773 -**4)PLC Settings (GX Works 2)**
774 -
775 -Create a blank FX5U project
776 -
777 -Find Current Connection in the navigation
778 -
779 -[[image:image-20221116111427-1.png||height="421" width="705"]]
780 -
781 -Select Connection Channel List
782 -
783 -Select Ethernet board communication
784 -
785 -[[image:image-20221116111451-2.png||height="421" width="705"]]
786 -
787 -Select Ethernet Module
788 -Set the IP address of the PLC
789 -
790 -[[image:image-20221116111509-3.png||height="666" width="699"]]
791 -
792 -Read or write PLC data, in this document is read
793 -
794 -[[image:image-20221116111651-4.png||height="416" width="697"]]
795 -
796 -[[image:image-20221116111727-5.png||height="416" width="697"]]
797 -
798 -**4)Configure the communication protocol**
799 -
800 -[[image:image-20221119101946-2.png||height="395" width="695"]]
801 -
802 802  == **FX5U Serial Protocol** ==
803 803  
804 804  Mitsubishi FX5U series PLC
... ... @@ -951,768 +951,55 @@
951 951  
952 952  **4）Configure the communication protocol**
953 953  
954 -[[image:image-20220825112403-1.png||alt="图片-20220825112403-1.png"]]
859 +[[image:image-20220825112403-1.png]]
955 955  
956 956  **5）Cable Wiring**
957 957  
958 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
959 -
960 -== **L02 Serial Protocol** ==
961 -
962 -Mitsubishi L02 series CPU built-in serial port.
963 -
964 -**1）V-BOX Settings**
965 -
966 -|**Item**|**Settings**|**Note**
967 -|Protocol|Mitsubishi L02|
968 -|Connection|RS422|
969 -|Baud rate|115200|
970 -|Data bit|8|
971 -|Parity|Odd|
972 -|Stop bit|1|
973 -|PLC station No.|1~~255|Need to be the same as PLC settings
974 -
975 -**2）Address List**
976 -
977 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
978 -|Bit|X|X|X h|0~~FFFF|
979 -|Bit|Y|Y|Y h|0~~FFFF|
980 -|Bit|M|M|M d|0~~9999|
981 -|Bit|L|L|L d|0~~9999|
982 -|Bit|F|F|F d|0~~9999|
983 -|Bit|B|B|B h|0~~FFFF|
984 -|Bit|V|V|V d|0~~2047|
985 -|Bit|TC|TC|TC d|0~~9999|
986 -|Bit|SS|SS|SS d|0~~9999|
987 -|Bit|SC|SC|SC d|0~~9999|
988 -|Bit|CS|CS|CS d|0~~9999|
989 -|Bit|CC|CC|CC d|0~~9999|
990 -|Bit|SB|SB|SB h|0~~FFFF|
991 -|Bit|SM|SM|SM d|0~~2047|
992 -|Bit|STS|STS|STS d|0~~1023|
993 -|Bit|S|S|S d|0~~9999|
994 -|Bit|DX|DX|DX h|0~~FFFF|
995 -|Bit|DY|DY|DY h|0~~FFFF|
996 -|Bit|TS|TS|TS d|0~~9999|
997 -|Bit|Dbit|Dbit|Dbit d.d|0~~99999.0~~15|
998 -|Word|W|W|W h|0~~FFFF|
999 -|Word|TN|TN|TN d|0~~99999|
1000 -|Word|SN|SN|SN d|0~~99999|
1001 -|Word|CN|CN|CN d|0~~99999|
1002 -|Word|R|R|R d|0~~99999|
1003 -|Word|SW|SW|SW h|0~~FFFF|
1004 -|Word|Z|Z|Z d|0~~99999|
1005 -|Word|ZR|ZR|ZR h|0~~FFFF|
1006 -|Word|D|D|D d|0~~99999|
1007 -
1008 -**3）Communication Settings**
1009 -
1010 -[[image:image-20220825160648-3.png]]
1011 -
1012 -**4）Cable Wiring**
1013 -
1014 -* **RS422**
1015 -
1016 -[[image:image-20220825161612-8.png]]
1017 -
1018 -[[image:image-20220825160820-4.png]]
1019 -
1020 -== **L02 Ethernet Protocol** ==
1021 -
1022 -Mitsubishi L series CPU built-in Ethernet port.
1023 -
1024 -**1）V-BOX Settings**
1025 -
1026 -|**Items**|**Settings**|**Note**
1027 -|Protocol|MIT L02 CPU MELSEC|
1028 -|Connection|Ethernet|
1029 -|Port No.|1025|Must be the same as the PLC setting
1030 -|PLC station No.|0|Must be the same as the PLC setting
1031 -
1032 -**2）Address List**
1033 -
1034 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1035 -|Bit|X|X|X h|0~~FFFF|
1036 -|Bit|Y|Y|Y h|0~~FFFF|
1037 -|Bit|M|M|M d|0~~9999|
1038 -|Bit|L|L|L d|0~~9999|
1039 -|Bit|F|F|F d|0~~9999|
1040 -|Bit|B|B|B h|0~~FFFF|
1041 -|Bit|V|V|V d|0~~2047|
1042 -|Bit|TC|TC|TC d|0~~9999|
1043 -|Bit|SS|SS|SS d|0~~9999|
1044 -|Bit|SC|SC|SC d|0~~9999|
1045 -|Bit|CS|CS|CS d|0~~9999|
1046 -|Bit|CC|CC|CC d|0~~9999|
1047 -|Bit|SB|SB|SB h|0~~FFFF|
1048 -|Bit|SM|SM|SM d|0~~2047|
1049 -|Bit|STS|STS|STS d|0~~1023|
1050 -|Bit|S|S|S d|0~~9999|
1051 -|Bit|DX|DX|DX h|0~~FFFF|
1052 -|Bit|DY|DY|DY h|0~~FFFF|
1053 -|Bit|TS|TS|TS d|0~~9999|
1054 -|Bit|Dbit|Dbit|Dbit d.d|0~~99999.0~~15|
1055 -|Word|W|W|W h|0~~FFFF|
1056 -|Word|TN|TN|TN d|0~~99999|
1057 -|Word|SN|SN|SN d|0~~99999|
1058 -|Word|CN|CN|CN d|0~~99999|
1059 -|Word|R|R|R d|0~~99999|
1060 -|Word|SW|SW|SW h|0~~FFFF|
1061 -|Word|Z|Z|Z d|0~~99999|
1062 -|Word|ZR|ZR|ZR h|0~~FFFF|
1063 -|Word|D|D|D d|0~~99999|
1064 -
1065 -**3）PLC Settings (GX Works2 )**
1066 -
1067 -Create a project
1068 -
1069 -Set PLC IP, subnet mask and gateway;
1070 -
1071 -Select [Binary Code] as communication data code;
1072 -
1073 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_776e17505f3fc6c0.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_776e17505f3fc6c0.png" height="524" width="600"]]
1074 -
1075 -Set PLC port number, for example 1025
1076 -
1077 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_8d0d1a22d388f70b.png?width=600&height=524&rev=1.1||alt="12.PLC Protocol_html_8d0d1a22d388f70b.png" height="524" width="600"]]
1078 -
1079 -Save settings;
1080 -
1081 -Download project into PLC device;
1082 -
1083 -Restart PLC device;
1084 -
1085 -**4）Configure the communication protocol**
1086 -
1087 -[[image:image-20220825142659-1.png]]
1088 -
1089 -**5）Cable Wiring**
1090 -
1091 1091  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1092 1092  
1093 -== **Q12H Serial Protocol** ==
865 += **Delta PLC** =
1094 1094  
1095 -This Demo shows V-BOX communicate with Q12H PLC by Q02H serial Protocol
1096 -
1097 -[[**Download link**>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Communication/V-Box%20connect%20PLC%20Q12H.rar]]
1098 -
1099 -== **QJ71E71 Ethernet Protocol** ==
1100 -
1101 -Mitsubishi QJ71E71 Ethernet communication module;
1102 -
1103 -**1）V-BOX Settings**
1104 -
1105 -|**Items**|**Settings**|**Note**
1106 -|Protocol|MIT QJ71E71 MELSEC|
1107 -|Connection|Ethernet|
1108 -|Port No.|1025|Must be the same as the PLC setting
1109 -|PLC station No.|0|Must be the same as the PLC setting
1110 -
1111 -**2）Address List**
1112 -
1113 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1114 -|(% rowspan="18" %)Bit|X|X|X h|0~~1FFF|
1115 -|Y|Y|Y h|0~~1FFF|
1116 -|M|M|M d|0~~99999|
1117 -|L|L|L d|0~~8191|
1118 -|F|F|F d|0~~2047|
1119 -|B|B|B h|0~~1FFF|
1120 -|V|V|V d|0~~2047|
1121 -|TS|TS|TS d|0~~2047|
1122 -|TC|TC|TC d|0~~2047|
1123 -|SS|SS|SS d|0~~2047|
1124 -|SC|SC|SC d|0~~2047|
1125 -|CS|CS|CS d|0~~1023|
1126 -|CC|CC|CC d|0~~1023|
1127 -|SB|SB|SB h|0~~7FF|
1128 -|S|S|S d|0~~8191|
1129 -|DX|DX|DX h|0~~1FFF|
1130 -|DY|DY|DY h|0~~1FFF|
1131 -|SM|SM|SM d|8000~~9999|
1132 -|(% rowspan="10" %)Word|SD|SD|SD d|0~~2047|
1133 -|D|D|D d|0~~12287|
1134 -|W|W|W h|0~~1FFF|
1135 -|TN|TN|TN d|0~~2047|
1136 -|SN|SN|SN d|0~~2047|
1137 -|CN|CN|CN d|0~~1023|
1138 -|R|R|R d|0~~32767|
1139 -|SW|SW|SW h|0~~7FF|
1140 -|Z|Z|Z d|0~~15|
1141 -|ZR|ZR|ZR h|0~~FE7FF|
1142 -
1143 -**3）PLC Settings(GX Works2)**
1144 -
1145 -* Click [Ethernet/CC IE/MELSECNET];
1146 -* Please select [Ethernet] as network type;
1147 -* Set station I/O number according to situation (For example, 0020 means that the module is connected to PLC CPU in first order);
1148 -* Select [Online] as Mode;
1149 -* [[image:image-20221119171343-2.png||height="341" width="587"]]
1150 -* Click [Operation setting] to set IP;
1151 -* Select [Binary Code] as [Communication Data Code];
1152 -* [[image:image-20221119171436-3.png||height="354" width="588"]]
1153 -* Click [Open setting]
1154 -* Set protocol: TCP;
1155 -* Set [unpassive] in [Open system];
1156 -* Set [receive] in [Fixed buffer];
1157 -* Set [procedure Exist] in [Fixed buffer communication];
1158 -* Disable [Pairing open];
1159 -* Set [No confirm] in [Existence confirmation];
1160 -* Host station port number: 5009;
1161 -* Save settings;
1162 -* [[image:image-20221119171611-4.png||height="354" width="588"]]
1163 -* Download project into PLC and restart it
1164 -
1165 -**4）Configure the communication protocol**
1166 -
1167 -[[image:image-20221119171832-5.png||height="354" width="625"]]
1168 -
1169 -
1170 -**5）Cable Wiring**
1171 -
1172 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png"]]
1173 -
1174 -= Create communication with **Delta PLC** =
1175 -
1176 1176  == **DVP Ethernet Protocol** ==
1177 1177  
1178 -[[Download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
869 +[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
1179 1179  
1180 -== **DVP serial protocol** ==
871 +== **DVP Serial Protocol** ==
1181 1181  
1182 -[[Download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
873 +[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
1183 1183  
1184 -== **AS Ethernet Protocol** ==
875 += **Omron PLC** =
1185 1185  
1186 -**1）V-BOX Settings**
877 +== **CP1 Series Protocol** ==
1187 1187  
1188 -|=**Items**|=**Settings**|=**Note**
1189 -|Protocol|DELTA AS300 MODBUS TCP|
1190 -|Connection|Ethernet|
1191 -|Port No.|502|
1192 -|Device No.|1|
1193 -|HMI No.|0|
879 +[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CP1%20Series.zip]]
1194 1194  
1195 -**2）Address List**
881 +== **CJ2M Series Protocol** ==
1196 1196  
1197 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1198 -|Bit|X|X|X d|0~~63|
1199 -|Bit|Y|Y|Y d|0~~63|
1200 -|Bit|D|D|D d|0~~29999|
1201 -|Bit|M|M|M d|0~~8191|
1202 -|Bit|SM|SM|SM d|0~~4095|
1203 -|Bit|S|S|S h|0~~2047|
1204 -|Bit|T|T|T d|0~~511|
1205 -|Bit|C|C|C d|0~~511|
1206 -|Bit|HC|HC|HC d|0~~255|
1207 -|Word|X|X|X h|0~~63|
1208 -|Word|Y|Y|Y d|0~~63|
1209 -|Word|SR|SR|SR d|0~~2047|
1210 -|Word|D|D|D d|0~~29999|
1211 -|Word|T|T|T d|0~~511|
1212 -|Word|C|C|C h|0~~511|
1213 -|Word|E|E|E d|0~~9|
883 +[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CJ2M.zip]]
1214 1214  
1215 -**3）Configure the communication protocol**
885 += **Modbus RTU** =
1216 1216  
887 +== **V-BOX as master** ==
1217 1217  
1218 -[[image:image-20220831160010-4.png]]
889 +Select the protocol “(% class="mark" %)Modbus RTU Slave(All Fuction)”,
1219 1219  
1220 -**4）Cable Wiring**
891 +(% class="mark" %)then set BaudRate,Port,Stop Bit,Data Bit,Parity
1221 1221  
1222 -Figure
1223 -
1224 -[[image:image-20220831155101-1.png]][[image:image-20220831160055-5.png]]
1225 -
1226 -Pin Definition Diagram
1227 -
1228 -[[image:image-20220831155157-3.png]]
1229 -
1230 -= Create communication with **Omron PLC** =
1231 -
1232 -== **CP1 Series Protocol ** ==
1233 -
1234 -[[下载链接>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CP1%20Series.zip]]
1235 -
1236 -== **CP2M Series Protocol** ==
1237 -
1238 -[[下载链接>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CJ2M.zip]]
1239 -
1240 -
1241 -== **EC55 Series Protocol** ==
1242 -
1243 -Supported device: EC55 temperature instrument
1244 -
1245 -**1）V-BOX Settings**
1246 -
1247 -|**Items**|**Settings**|**Note**
1248 -|Protocol|Omron EC55|
1249 -|Connection|RS485 (9600, 2, 7, EVEN)|
1250 -|Port No.|None|
1251 -|PLC station No.|0|
1252 -
1253 -**2）Address List**
1254 -
1255 -|**Type**|**Register**|**Device range**|**HMI range**|**Function**
1256 -|(% rowspan="3" %)Double word|C0|0-13 (Hex)|0-19|Set read only parameter for area 0
1257 -|C1|0-4D(Hex)|0-77|Set Read/Write parameter for area 0
1258 -|C3|0-CD(Hex)|0-205|Set Read/Write parameter for area 1
1259 -|(% rowspan="6" %)Word|80|0-13(Hex)|0-19|Set read only parameter in area 0
1260 -|81|0-4D(Hex)|0-77|Set Read/Write parameter in area 0
1261 -|83|0-CD(Hex)|0-205|Set Read/Write parameter in area 1
1262 -|CP|-|0-6|Read controller intrinsic property
1263 -|CS|-|0-2|Read controller states
1264 -|CA|-|0-17|Action command
1265 -
1266 -**3）Device Settings**
1267 -
1268 -Omron E5CC PLC configuration
1269 -
1270 -After entering the Communication Settings menu, please set the parameters to the default values for the following table. Press the cycle key of the instrument to enter the next setting.
1271 -
1272 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_3d95e093792ba98a.png?width=550&height=229&rev=1.1||alt="12.PLC Protocol_html_3d95e093792ba98a.png" height="229" width="550"]]
1273 -
1274 -According to PLC configuration and communication port configuration information of the HMI, provide the corresponding steps and configuration screenshots. This configuration needs to communicate properly with the above PLC configuration. The project settings are as follows
1275 -
1276 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_be583aa69dd6cf4c.png?width=550&height=242&rev=1.1||alt="12.PLC Protocol_html_be583aa69dd6cf4c.png" height="242" width="550"]]
1277 -
1278 -**✎Note:** The communication settings for HMI should be consistent with this setting.
1279 -
1280 -**4）Configure the communication protocol**
1281 -
1282 -[[image:image-20220831161041-1.png]]
1283 -
1284 -**5）Cable Wiring**
1285 -
1286 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_5e9a81a14106da9e.png?width=392&height=223&rev=1.1||alt="12.PLC Protocol_html_5e9a81a14106da9e.png" height="223" width="392"]]
1287 -
1288 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_1897d92be6948d58.png?width=393&height=223&rev=1.1||alt="12.PLC Protocol_html_1897d92be6948d58.png" height="223" width="393"]]
1289 -
1290 -**✎Note:**
1291 -
1292 -* COM3 only available in PI8000/PI9000 series.
1293 -* CA address could not support continuous writing function；
1294 -* Because of CP address intrinsic property: read control intrinsic property, so please place the character input part in use. Set address with CP0 and character length 10, used to display controller type. And place a number input part, set address with CP5 (cache size). Do not place other CP type address without CP0 in screen, otherwise CP type address is invalid
1295 -* When set value into read & write address, it is necessary to switch the temperature instrument meter to the corresponding interface according to the menu of the instrument where the address locates, so that the value could be written, otherwise, the value could not be written; When the communication write setting of the instrument is turned off, the writing function is invalid. Writing function could be opened by using the 00 address of the CA register, which write 01 value.
1296 -* When continuous writing of a value to a read-write address, please make sure all continuous writing address could be written. Otherwise, if one of these addresses could not be written, then all continuous writing commands will fail.
1297 -* Because of the mechanism problem, this protocol could not support CompoWay/F function that is read-write function of variables in protocol document.
1298 -* When using double-word address, set the data format to 32 bits, otherwise the read/write function is unable.
1299 -* Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
1300 -* [[image:image-20220831161356-1.png]]Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
1301 -
1302 -= Create communication with Xinje** PLC** =
1303 -
1304 -== **XC serial protocol** ==
1305 -
1306 -**1）V-BOX Settings**
1307 -
1308 -|**Item**|**Settings**|**Note**
1309 -|Protocol|XINJE XC MODBUS|
1310 -|Connection|RS232|
1311 -|Baud rate|19200|
1312 -|Data bit|8|
1313 -|Parity|EVEN|
1314 -|Stop bit|1|
1315 -|PLC station No.|1|
1316 -
1317 -**2）Address List**
1318 -
1319 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1320 -|Bit|M|M|M d|0~~8511|
1321 -|Bit|X|X|X o|0~~1747|
1322 -|Bit|Y|Y|Y o|0~~1747|
1323 -|Bit|S|S|S d|0~~1023|
1324 -|Bit|T|T|T d|0~~4095|
1325 -|Bit|C|C|C d|0~~634|
1326 -|Word|D|D|D d|0~~8511|
1327 -|Word|TD|TD|TD d|0~~618|
1328 -|Word|CD|CD|CD d|0~~634|
1329 -|Word|FD|FD|FD d|0~~8511|
1330 -
1331 -**3）Configure the communication protocol**
1332 -
1333 -
1334 -[[image:image-20220831163041-1.png]]
1335 -
1336 -**4）Cable Wiring**
1337 -
1338 -Figure
1339 -
1340 -[[image:image-20220831163406-2.png]][[image:image-20220831163422-3.png]]
1341 -
1342 -Pin Definition Diagram
1343 -
1344 -[[image:image-20220831163441-4.png]]
1345 -
1346 -== **XD serial protocol** ==
1347 -
1348 -**1）V-BOX Settings**
1349 -
1350 -Supported Series: Xinjie XD/XE Series PLC
1351 -
1352 -|**Item**|**Settings**|**Note**
1353 -|Protocol|XINJE XD/XC MODBUS|
1354 -|Connection|RS232|
1355 -|Baud rate|19200|
1356 -|Data bit|8|
1357 -|Parity|EVEN|
1358 -|Stop bit|1|
1359 -|PLC station No.|1|
1360 -
1361 -**2）Address List**
1362 -
1363 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1364 -|Bit|M|M|M d|0~~74999|
1365 -|Bit|X1xx|X1xx|X1xx o|0~~1177|
1366 -|Bit|X2xx|X2xx|X2xx o|0~~277|
1367 -|Bit|X|X|X o|0~~77|
1368 -|Bit|Y1xx|Y1xx|Y1xx o|0~~1177|
1369 -|Bit|Y2xx|Y2xx|Y2xx o|0~~277|
1370 -|Bit|Y|Y|Y o|0~~4095|
1371 -|Bit|SM|SM|SM d|0~~4999|(((
1372 -
1373 -)))
1374 -|Bit|T|T|T d|0~~4999|
1375 -|Bit|C|C|C d|0~~4999|
1376 -|Bit|ET|ET|ET d|0~~31|
1377 -|Bit|SE|SE|SE d|0~~31|
1378 -|Bit|HM|HM|HM d|0~~11999|
1379 -|Bit|HSC|HSC|HSC d|0~~39|
1380 -|Bit|HS|HS|HS d|0~~999|
1381 -|Bit|HT|HT|HT d|0~~1999|
1382 -|Bit|HC|HC|HC d|0~~1999|
1383 -|Bit|S|S|S d|0~~7999|
1384 -|Word|D|D|D d|0~~69999|
1385 -|Word|ID|ID|ID d|0~~99|
1386 -|Word|ID1xx|ID1xx|ID1xx d|0~~999|
1387 -|Word|ID2xx|ID2xx|ID2xx d|0~~299|
1388 -|Word|QD|QD|QD d|0~~99|
1389 -|Word|QD1xx|QD1xx|QD1xx d|0~~999|
1390 -|Word|QD2xx|QD2xx|QD2xx d|0~~299|
1391 -|Word|SD|SD|SD d|0~~4999|
1392 -|Word|TD|TD|TD d|0~~575|
1393 -|Word|CD|CD|CD d|0~~575|
1394 -|Word|ETD|ETD|ETD d|0~~31|
1395 -|Word|HD|HD|HD d|0~~24999|
1396 -|Word|HSD|HSD|HSD d|0~~1023|
1397 -|Word|HTD|HTD|HTD d|0~~95|
1398 -|Word|HCD|HCD|HCD d|0~~95|
1399 -|Word|HSCD|HSCD|HSCD d|0~~31|
1400 -|Word|FD|FD|FD d|0~~8191|
1401 -|Word|SFD|SFD|SFD d|0~~5999|
1402 -|Word|FS|FS|FS d|0~~47|
1403 -
1404 -**3）Configure the communication protocol**
1405 -
1406 -[[image:image-20220831163923-7.png]]
1407 -
1408 -
1409 -
1410 -**4）Cable Wiring**
1411 -
1412 -Figure
1413 -
1414 -[[image:image-20220831163406-2.png]][[image:image-20220831163553-6.png]]
1415 -
1416 -Pin Definition Diagram
1417 -
1418 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/image-20220830160232-3.png?rev=1.1||alt="image-20220830160232-3.png"]]
1419 -
1420 -= Create communication with **Schneider PLC** =
1421 -
1422 -== **Schneider MODBUS RTU** ==
1423 -
1424 -**1）V-BOX Setting**
1425 -
1426 -|=**Parameters**|=**Recommended**|=**Notes**
1427 -|**Protocol**|(% colspan="1" %)Schneider MODBUS RTU|
1428 -|**Connection**|RS485|
1429 -|**Baud rate**|19200|
1430 -|**Data bit**|8|
1431 -|**Parity**|Even|
1432 -|**Stop bit**|1|
1433 -|**PLC station No.**|1|
1434 -
1435 -**2）Address List**
1436 -
1437 -|=**Bit/Word**|=**Device type**|=**Format**|=**Range**|=**Memo**
1438 -|B|IX|DDDDDo|0 ~~ 655357|Input bit (read only)
1439 -|B|QX|DDDDDo|0 ~~ 655357|Write multiple coils
1440 -|B|MX|DDDDDDo|0 ~~ 9999997|Output register bit (octal)
1441 -|W|MW|DDDDDD|0 ~~ 999999|Output register
1442 -|DW|MD|DDDDDD|0 ~~ 999999|Output register
1443 -
1444 -**3）Configure the communication protocol**
1445 -
1446 -[[image:image-20220902104329-1.png]]
1447 -
1448 -**4）Cable Wiring**
1449 -
1450 -**RS-485 2W **(RJ45 Connector): The following is the view from the soldering point of a connector.
1451 -
1452 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/image-20220817154212-1.jpeg?width=554&height=315&rev=1.1||alt="image-20220817154212-1.jpeg" height="315" width="554"]]
1453 -
1454 -= Create communication with Inovance** PLC** =
1455 -
1456 -== **H3U serial protocol** ==
1457 -
1458 -**1）V-BOX Settings**
1459 -
1460 -|**Item**|**Settings**|**Note**
1461 -|Protocol|INOVANCE H3U PLC|
1462 -|Connection|RS422|
1463 -|Baud rate|9600|
1464 -|Data bit|7|
1465 -|Parity|EVEN|
1466 -|Stop bit|1|
1467 -|PLC station No.|0|
1468 -
1469 -**2）Address List**
1470 -
1471 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1472 -|Bit|X|X|X o|0~~303237|
1473 -|Bit|Y|Y|Y o|0~~303237|
1474 -|Bit|M|M|M d|0~~99999|
1475 -|Bit|T|T|T d|0~~99999|
1476 -|Bit|C|C|C d|0~~99999|
1477 -|Bit|SM|SM|SM d|8000~~999|
1478 -|Bit|S|T|S d|0~~99999|
1479 -|Bit|Lamp|Lamp|Lamp d|0~~0|
1480 -|Word|X|X|X o|0~~303237|
1481 -|Word|Y|Y|Y o|0~~303237|
1482 -|Word|M|M|M d|0~~99999|
1483 -|Word|T|T|T d|0~~99999|
1484 -|Word|C|C|C d|0~~199|
1485 -|Word|D|D|D d|0~~7999|
1486 -|Word|S|S|S d|0~~99999|
1487 -|Word|SD|SD|SD d|8000~~9999|
1488 -|Word|R|R|R d|0~~32767|
1489 -
1490 -**3）Configure the communication protocol**
1491 -
1492 -[[image:image-20220831164626-1.png]]
1493 -
1494 -
1495 -
1496 -**4）Cable Wiring**
1497 -
1498 -Figure
1499 -
1500 -[[image:image-20220831164646-2.png]][[image:image-20220831164700-3.png]]
1501 -
1502 -Pin Definition Diagram
1503 -
1504 -[[image:image-20220831164731-4.png]]
1505 -
1506 -= Create communication with Panasonic** PLC** =
1507 -
1508 -== **FP serial protocol** ==
1509 -
1510 -**1）V-BOX Settings**
1511 -
1512 -|**Item**|**Settings**|**Note**
1513 -|Protocol|Panasonic FP MFWTOCOL|
1514 -|Connection|RS232|
1515 -|Baud rate|9600|
1516 -|Data bit|8|
1517 -|Parity|ODD|
1518 -|Stop bit|1|
1519 -|PLC station No.|1|
1520 -
1521 -**2）Address List**
1522 -
1523 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1524 -|Bit|X|X|X d|0~~9999|
1525 -|Bit|Y|Y|Y d|0~~9999|
1526 -|Bit|R|R|R d|0~~9999|
1527 -|Bit|T|T|T d|0~~9999|
1528 -|Bit|C|C|C d|0~~9999|
1529 -|Bit|L|L|L d|0~~9999|
1530 -|Word|WX|WX|WX d|0~~9999|
1531 -|Word|WY|WY|WY d|0~~9999|
1532 -|Word|WR|WR|WR d|0~~9999|
1533 -|Word|WL|WL|WL d|0~~9999|
1534 -|Word|LD|LD|LD d|0~~9999|
1535 -|Word|DT|DT|DT d|0~~65535|
1536 -|Word|FL|FL|FL d|0~~9999|
1537 -|Word|EV|EV|EV d|0~~9999|
1538 -|Word|SV|SV|SV d|0~~9999|
1539 -
1540 -**3）Configure the communication protocol**
1541 -
1542 -[[image:image-20220831165238-4.png]]
1543 -
1544 -
1545 -
1546 -**4）Cable Wiring**
1547 -
1548 -Figure
1549 -
1550 -[[image:image-20220831165031-3.png]][[image:image-20220831165017-2.png]]
1551 -
1552 -Pin Definition Diagram
1553 -
1554 -[[image:image-20220831165008-1.png]]
1555 -
1556 -= Create communication with LS** PLC** =
1557 -
1558 -== **XBC serial protocol** ==
1559 -
1560 -**1）V-BOX Settings**
1561 -
1562 -|**Item**|**Settings**|**Note**
1563 -|Protocol|LS XBC CNet|
1564 -|Connection|RS232|
1565 -|Baud rate|115200|
1566 -|Data bit|8|
1567 -|Parity|NONE|
1568 -|Stop bit|1|
1569 -|PLC station No.|1|
1570 -
1571 -**2）Address List**
1572 -
1573 -|**Type**|**Device registers**|**HMI registers**|**Format**|**Range**|**Note**
1574 -|Bit|P|P|P d|0~~2047|
1575 -|Bit|M|M|M d|0~~2047|
1576 -|Bit|L|L|L d|0~~11263|
1577 -|Bit|K|K|K d|0~~16183|
1578 -|Bit|F|F|F d|0~~2047|
1579 -|Bit|D|D|D d|0~~32767|
1580 -|Bit|R|R|R d|0~~32767|
1581 -|Bit|U|U|U d|0~~4095|
1582 -|Word|P|P|P d|0~~2047|
1583 -|Word|M|M|M d|0~~2047|
1584 -|Word|L|L|L d|0~~11263|
1585 -|Word|K|K|K d|0~~16183|
1586 -|Word|F|F|F d|0~~2047|
1587 -|Word|C|C|C d|0~~2047|
1588 -|Word|T|T|T d|0~~2047|
1589 -|Word|D|D|D d|0~~32767|
1590 -|Word|N|N|N d|0~~21503|
1591 -|Word|R|R|R d|0~~32767|
1592 -|Word|U|U|U d|0~~4095|
1593 -|Word|Z|Z|Z d|0~~127|
1594 -|Word|S|S|S d|0~~127|
1595 -
1596 -**3）Configure the communication protocol**
1597 -
1598 -[[image:image-20220831170147-1.png]]
1599 -
1600 -**4）Cable Wiring**
1601 -
1602 -Figure
1603 -
1604 -[[image:image-20220831170306-4.png]][[image:image-20220831170254-3.png]]
1605 -
1606 -Pin Definition Diagram
1607 -
1608 -[[image:image-20220831170215-2.png]]
1609 -
1610 -== **XGK FEnet Ethernet protocol** ==
1611 -
1612 -Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
1613 -
1614 -**1）V-BOX Settings**
1615 -
1616 -|**Items**|**Settings**|**Note**
1617 -|Protocol|LG XGK FEnet(Ethernet)|
1618 -|Connection|Ethernet|
1619 -|Port No.|2004|
1620 -
1621 -**2）Address List**
1622 -
1623 -|**Type**|**Register**|**Range**|**Format**|**Note**
1624 -|(% rowspan="14" %)Word|P|0~~2047|P d|
1625 -|M|0~~2047|M d|
1626 -|K|0~~2047|K d|
1627 -|F|0~~2047|F d|
1628 -|T|0~~2047|T d|
1629 -|C|0~~2047|C d|
1630 -|Z|0~~127|Z d|
1631 -|S|0~~127|S d|
1632 -|L|0~~11263|L d|
1633 -|N|0~~21503|N d|
1634 -|D|0~~32767|D d|
1635 -|R|0~~32767|R d|
1636 -|ZR|0~~65535|ZR d|
1637 -|UxDD|0~~6331|UxDD nndd|nn: 0~~63, dd: 0~~31
1638 -
1639 -**✎Note:**
1640 -
1641 -* In addition to the "UxDD" register, the others correspond to the PLC register one by one. UxDD corresponds to U in the PLC;
1642 -* The [UxDD] register, defined in the PLC is Ux.dd, x represents the block, and dd represents 0-31 of each block. There are 64 blocks in the PLC;
1643 -* All bit registers are in the form of bits in word, and the range is the same as the word register;
1644 -
1645 -**3）Communication Settings**
1646 -
1647 -[[image:image-20220831171127-1.png]]
1648 -
1649 -**4）Cable Wiring**
1650 -
1651 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1652 -
1653 -= Create communication with **Modbus ** =
1654 -
1655 -== **MODBUS RTU Slave (All function)** ==
1656 -
1657 -Select the protocol "Modbus RTU Slave (All Fuction)",
1658 -
1659 -Then set baud rate, port, stop bits, data bits, parity.
1660 -
1661 1661  (% style="text-align:center" %)
1662 1662  [[image:1624342015914-382.png||height="486" width="800" class="img-thumbnail"]]
1663 1663  
1664 -== **MODBUS RTU Master** ==
896 +== **V-BOX as slave** ==
1665 1665  
1666 -Select the protocol "Modbus RTU Master",
898 +Select the protocol “(% class="mark" %)**Modbus RTU Master”**,
1667 1667  
1668 -Then set baud rate, port, stop bits, data bits, parity
900 +(% class="mark" %)then set BaudRate,Port,Stop Bit,Data Bit,Parity
1669 1669  
1670 1670  (% style="text-align:center" %)
1671 1671  [[image:1624348709622-711.png||queryString="width=809&height=493" height="488" width="800" class="img-thumbnail"]]
1672 1672  
1673 -**address list**
905 +**Address List**
1674 1674  
1675 1675  (% class="table-bordered" %)
1676 -|**type**|**register**|**Function code and description**
1677 -|(% rowspan="11" %)词|(% rowspan="3" %)3|04 (Read Input Registers: Read the current binary value in one or more input registers)
1678 -|06 (write single register: write a binary value to a holding register)
1679 -|10 (write values to multiple addresses )
1680 -|(% rowspan="3" %)4|03 (read holding register: read current binary value in one or more holding registers)
1681 -|06 (write single register: write a binary value to a holding register)
1682 -|10 (write values to multiple addresses )
1683 -|(% rowspan="3" %)W6|03 (read holding register: read current binary value in one or more holding registers)
1684 -|06 (write single register: write a binary value to a holding register)
1685 -|10 (write values to multiple addresses )
1686 -|(% rowspan="2" %)W16|03 (read holding register: read current binary value in one or more holding registers)
1687 -|10 (write values to multiple addresses )
1688 -|(% rowspan="11" %)Bit|(% rowspan="3" %)0|01 (Read coil state)
1689 -|05 (Force a single coil to force the on/off state of a logic coil)
1690 -|0F (Write multiple bits, ie write continuously)
1691 -|(% rowspan="3" %)1|02 (Read the input state)
1692 -|05 (Force a single coil to force the on/off state of a logic coil)
1693 -|0F (Write multiple bits)
1694 -|(% rowspan="3" %)W5|01 (Read coil state to obtain the current state of a set of logic coils)
1695 -|05 (Force a single coil to force the on/off state of a logic coil)
1696 -|0F (Write multiple bits)
1697 -|(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
1698 -|0F (Write multiple bits)
1699 -
1700 -== **MODBUS TCP Slave (All function)** ==
1701 -
1702 -Supported series: MODBUS TCP controller
1703 -
1704 -V-B0X works as MODBUS TCP MASTER connecting with TCP SLAVE
1705 -
1706 -**1）V-BOX Setting**
1707 -
1708 -|**Items**|**Settings**|**Note**
1709 -|Protocol|MODBUS TCP Slave (All function)|
1710 -|Connection|Ethernet|
1711 -|Port No.|502|
1712 -|PLC station No.|1
1713 -
1714 -**2）Address List**
1715 -
1716 1716  |**Type**|**Register**|**Function code & Description**
1717 1717  |(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
1718 1718  |06 (write single register: write a binary value to a holding register)
... ... @@ -1737,21 +1737,6 @@
1737 1737  |(% rowspan="2" %)W15|01 (Read coil state to obtain the current state of a set of logic coils)
1738 1738  |0F (Write multiple bits)
1739 1739  
1740 -**3）Communication Settings**
1741 -
1742 -Configure V-BOX Ethernet IP in Networking Settings
1743 -
1744 -[[image:image-20220902111833-3.png]]
1745 -
1746 -
1747 -Configure PLC Ethernet IP in Communication；
1748 -
1749 -[[image:image-20220902111121-1.png]]
1750 -
1751 -**4）Cable Wiring**
1752 -
1753 -[[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
1754 -
1755 1755  == **communicate with VB inverter** ==
1756 1756  
1757 1757  [[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20VB%20inverter.zip]]
image-20220825142437-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -126.5 KB
Content
image-20220825142659-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -124.2 KB
Content
image-20220825143728-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -124.7 KB
Content
image-20220825160227-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -148.8 KB
Content
image-20220825160341-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -121.7 KB
Content
image-20220825160648-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -122.7 KB
Content
image-20220825160820-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
image-20220825160925-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20220825160929-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -31.0 KB
Content
image-20220825161440-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -90.7 KB
Content
image-20220825161612-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -86.3 KB
Content
image-20220831155101-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -34.6 KB
Content
image-20220831155129-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -44.9 KB
Content
image-20220831155157-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -20.8 KB
Content
image-20220831160010-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -59.6 KB
Content
image-20220831160055-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -51.5 KB
Content
image-20220831161041-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -58.1 KB
Content
image-20220831161356-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -27.0 KB
Content
image-20220831163041-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -58.6 KB
Content
image-20220831163406-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -28.4 KB
Content
image-20220831163422-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -53.9 KB
Content
image-20220831163441-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -13.7 KB
Content
image-20220831163548-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20220831163553-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -37.1 KB
Content
image-20220831163923-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -57.3 KB
Content
image-20220831164626-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -56.1 KB
Content
image-20220831164646-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -28.4 KB
Content
image-20220831164700-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -66.6 KB
Content
image-20220831164731-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -12.3 KB
Content
image-20220831165008-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -13.3 KB
Content
image-20220831165017-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -36.2 KB
Content
image-20220831165031-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -28.3 KB
Content
image-20220831165238-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -57.4 KB
Content
image-20220831170147-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -57.1 KB
Content
image-20220831170215-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -14.3 KB
Content
image-20220831170254-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content
image-20220831170306-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -28.5 KB
Content
image-20220831171127-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -60.1 KB
Content
image-20220902104329-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -58.7 KB
Content
image-20220902111121-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -60.9 KB
Content
image-20220902111754-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -57.6 KB
Content
image-20220902111833-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ben
Size
... ... @@ -1,1 +1,0 @@
1 -56.1 KB
Content
image-20221116105850-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -18.9 KB
Content
image-20221116105947-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -18.7 KB
Content
image-20221116110802-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -16.4 KB
Content
image-20221116110832-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -42.2 KB
Content
image-20221116110907-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -17.8 KB
Content
image-20221116110917-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -23.2 KB
Content
image-20221116111427-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -63.4 KB
Content
image-20221116111451-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -225.5 KB
Content
image-20221116111509-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -34.1 KB
Content
image-20221116111651-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -74.3 KB
Content
image-20221116111727-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -106.2 KB
Content
image-20221116114106-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -99.5 KB
Content
image-20221119101759-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -62.1 KB
Content
image-20221119101946-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -68.7 KB
Content
image-20221119171318-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -90.3 KB
Content
image-20221119171343-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -90.3 KB
Content
image-20221119171436-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -43.4 KB
Content
image-20221119171611-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -23.1 KB
Content
image-20221119171832-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -69.6 KB
Content