Changes for page 1 Communication

Last modified by xingzhi lin on 2025/08/01 15:25

From 200.1 to 201.1 From 260.1 to 261.1

From version 201.1

edited by Hunter
on 2023/01/15 16:36

Change comment: There is no comment for this version

To version 260.1

edited by Hunter
on 2024/07/01 10:54

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 49 added, 0 removed)

Details

Page properties

Content

@@ -1,6 +1,6 @@
--= Create communication with WECON PLC =
++= WECON =
--== **LX3V Serial Protocol** ==
++== **LX3V Serial ** ==
  Supported series: Wecon LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM
@@ -48,7 +48,7 @@
                                                                     [[image:image-20220824120524-3.png]]
--== **LX5V Serial Protocol** ==
++== **LX5V Serial ** ==
  This example introduces the establishment of serial port communication between V-BOX and LX5V. It is introduced through three parts: PLC software configuration, V-BOX software configuration, and hardware wiring.
@@ -118,7 +118,7 @@
  The above are all the steps for establishing serial port communication between V-BOX with LX5V PLC.
--== **LX5V-N Ethernet protocol** ==
++== **LX5V-N Ethernet ** ==
  This example introduces the establishment of Ethernet communication between V-BOX and LX5V-N. It is introduced through three parts: PLC software configuration, V-BOX software configuration, and hardware wiring.
@@ -176,9 +176,9 @@
  The above are all the steps for establishing ethernet communication between V-BOX with LX5V PLC.
--= Create communication with **Rockwell PLC** =
++= Allen-Bradley(**Rockwell**) =
--== **DF1 Advanced Protocol** ==
++== **DF1 Advanced  Serial** ==
  MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05; PLC-5
@@ -274,8 +274,12 @@
  (% style="text-align:center" %)
  [[image:ABRS232.gif]]
--== (% id="cke_bm_5621S" style="display:none" %)** **(%%)**MicroLogix Protocol** ==
++(% class="wikigeneratedid" id="HMicroLogixA0Protocol" %)
++(% id="cke_bm_5621S" style="display:none" %)** **
++== **MicroLogix Serial** ==
++
++(% class="wikigeneratedid" %)
  MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
  **1）V-BOX setting**
@@ -313,7 +313,7 @@
  [[image:image-20220824110724-1.png]]
--== **Micro850_FreeTag Protocol** ==
++== **Micro850_FreeTag Ethernet** ==
  (((
  (((
@@ -516,20 +516,293 @@
  The above are all the steps for establishing Ethernet communication between Wecon V-box with CompactLogix L1769 PLC.
--= **Allen-Bradley Ethernet DF1** =
++== **Micro850_FreeTag Ethernet（new）** ==
++This example introduces the establishment of Ethernet communication between Wecon V-box and 2080-LC50-48QWB,Micro850. It is introduced through three parts: PLC software configuration, V-box software configuration.
++
++(% class="wikigeneratedid" id="HSoftwareconfigurationofPLC" %)
++(((
++**Software configuration of PLC**
++)))
++
++(% class="wikigeneratedid" id="HPLCprogrammingsoftware" %)
++(((
++**1）PLC programming software：Connected Components Workbench™**
++
++(% style="text-align:center" %)
++[[image:software.png]]
++
++**2）New PLC project**
++
++Click New Project and select the PLC model.
++
++(% style="text-align:center" %)
++[[image:project create.png]]
++
++**3）Set Ethernet parameters**
++
++Follow the steps below to configure Ethernet parameters
++
++PLC IP address：192.168.39.56
++
++default gateway：192.168.39.1
++
++subnet mask：255.255.255.0
++
++(% style="text-align:center" %)
++[[image:Ethernet.png]]
++
++**4）connect PLC**
++
++**When downloading the setting, need to change the status of the PLC to PRG**
++
++(% style="text-align:center" %)
++[[image:conne ab plc.png]]
++
++**V-box software configuration**
++
++**1）V-box programming software**
++
++(% style="text-align:center" %)
++[[image:v-net client vers.png]]
++
++**2）Set communication port parameters**
++
++In the device list on the left, find the Vbox that communicates with the L1769, click it and select configuration,communication port configuration in the main interface to add a communication protocol.
++
++(% style="text-align:center" %)
++[[image:V-NET_Client_t2Rg2wpSoY.png]]
++
++The communication port is selected as Ethernet, the device type is selected as Allen-Bradley, the protocol is Allen-BradleyMicro850_FreeTag EthemetIP, and the IP is the internal IP address of the L1769 PLC. The port number is 44818.
++
++(% style="text-align:center" %)
++[[image:V-NET_Client_communication.png]]
++
++Export variables from PLC, select CSV file, comma delimited.(% id="cke_bm_1950S" style="display:none" %)
++
++(% style="text-align:center" %)
++[[image:export1.png]]
++
++(% style="text-align:center" %)
++[[image:CCW.Shell_E5Cwj4tUL3.png]]
++
++After adding the protocol Allen-BradleyMicro850_FreeTag, click[[image:https://docs.we-con.com.cn/bin/download/V-BOX/V-Net/Training/1%20Communication/WebHome/image-20220714143838-2.png?rev=1.1||alt="image-20220714143838-2.png"]]icon add label.
++
++(% style="text-align:center" %)
++[[image:V-NET_Client_TNBuqy7T5r.png]]
++
++**3）Engineering production**
++
++According to your own needs, use the V-NET client software to edit the required data monitoring points.
++
++(% style="text-align:center" %)
++[[image:V-NET_Client_KOR0AHEA4M.png]]
++
++
++)))
++
++== **Ethernet DF1** ==
++
  [[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Allen-Bradley%20Ethernet%20DF1.zip]]
++= **Crouzet PLC** =
--= Create communication with **Siemens PLC** =
++== **CROUZET M3 (FBD) Serial** ==
--== **S7-200 Smart Ethernet Protocol** ==
++Support Series: Crouzet Millenium 3 CD12/CB12
--[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20S7-200%20Smart.zip]]
++**1）V-BOX setting**
++|=Item|=Recommended |=Note
++|=Protocol|CROUZET M3 (FBD)|
++|=Connection|RS232|
++|=Baud rate|115200|
++|=Stop bits|1|
++|=Data bits|7|
++|=Parity|EVEN|
--== **S7-300 Ethernet Protocol** ==
++**2）Address List**
++|=**Type**|=**Device registers**|=**Format**|=**Range**|=Note
++|(% rowspan="4" %)Bit|I|I DD|1~~99|Input
++|SLIBit|SLIBit DD.dd|1.0~~24.15|Serial Link Input
++|SLOBit|SLOBit DD.dd|25.0~~48.15|Serial Link Output(Read only)
++|State|State D|1~~1|PLC state(Read only)
++|(% rowspan="5" %)Word|AI|AI DD|1~~99|Analog Input
++|SLIn|SLIn DD|1~~24|Serial Link Input
++|SLOut|SLOut DD|25~~48|Serial Link Output(Read only)
++|Time|Time D|1~~6|(((
++Time1: Second
++
++Time2: Minute
++
++Time3: Hour
++
++Time4: Day
++
++Time5: Month
++
++Time6: Year
++)))
++|Order|Order D|1~~1|(((
++Running command(Write only)
++
++~=2: Run mode; =1: Stop mode;
++)))
++
++**3）Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:CrouzetRS232 VBox.png]]
++
++{{info}}
++**✎Note: **As the wiring diagram indicated, this protocol requires the DB9 serial port pin 4. But pin 4 is undefined for all V-Box, so it need the user to solder a Pull-up resistor to make the pin 4 working. As for how to solder the resistor on the motherboard, please contact with Wecon technical support for the details.
++{{/info}}
++
++= EMERSON =
++
++= **RTU Slave ** =
++
++Supported series: EC10 series
++
++**1）V-BOX setting**
++
++|**Items**|**Settings**|**Note**
++|Protocol|Emerson 984 RTU Slave MODBUS|
++|Connection|RS485|
++|Baud rate|19200|
++|Data bit|8|
++|Parity|EVEN|
++|Stop bit|1|
++|Device station No.|1|Need to be same as the PLC setting
++
++(% class="wikigeneratedid" %)
++**2）PLC Setting**
++
++(% class="wikigeneratedid" %)
++Remember to use the Control Star to enable the Modbus RTU communication for port 1 in system block before dowload into PLC.
++
++(% style="text-align:center" %)
++[[image:ControlStarSystemBlock.png]]
++
++(% style="text-align:center" %)
++[[image:ControlStarCommunicate.png]]
++
++(% style="text-align:center" %)
++[[image:ControlStarModbus.png]]
++
++(% class="wikigeneratedid" %)
++**3）Address List**
++
++|**Type**|**Device registers**|**Format**|**Range**|**Note**
++|(% colspan="1" rowspan="12" %)Bit|Y|YOOO|0~~377|
++|X|XOOO|0~~377|
++|M0|M0DDDD|0~~2047|
++|M1|M1DDDDD|2048~~10239|
++|SM0|SM0DDD|0~~255|
++|SM1|SM1DDD|256~~511|
++|S0|S0DDDD|0~~1023|
++|S1|S1DDDD|1024~~4095|
++|T0|T0DDD|0~~255|
++|T1|T1DDD|256~~511|
++|C0|C0DDD|0~~255|
++|C1|C1DDD|256~~306|
++|(% colspan="1" rowspan="7" %)Word|D|DDDDD|0~~7999|
++|Z|ZDD|0~~15|
++|TW0|TW0DDD|0~~255|
++|TW1|TW1DDD|256~~511|
++|SD0|SD0DDD|0~~255|
++|SD1|SD1DDD|256~~511|
++|CW|CWDDD|0~~306|
++|(% colspan="1" rowspan="2" %)Double Word|CW0|CW0DDD|200~~255|
++|CW1|CW1DDDDD|256~~99999|
++
++**4) Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:Emerson.png]]
++
++= HollySys PLC =
++
++== **LK Modbus RTU ** ==
++
++Supported Series: HollySys LK series PLC
++
++**1）V-BOX setting**
++
++|**Items**|**Settings**|**Note**
++|Protocol|HollySys LK Modbus RTU|
++|Connection|RS485|
++|Baud rate|38400|
++|Data bit|8|
++|Parity|None|
++|Stop bit|1|
++|Device station No.|1|
++
++**2）Address List**
++
++|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
++|Bit|QX|QXDDDDD.dd|0~~65535.15|
++|Bit|IX|IXDDDDD.dd|0~~65535.15|
++|Bit|MX|MXDDDDD.dd|0~~65535.15|
++|Word|QW|QWDDDDD|0~~99999|
++|Word|IW|IWDDDDD|0~~99999|
++|Word|MW|MWDDDDD|0~~99999|
++|Word|MD|MDDDDDD|0~~99999|
++
++**3）Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:Hollysys485-2.png]]
++
++== **LM Modbus RTU** ==
++
++(% class="wikigeneratedid" %)
++Supported Series: HollySys LM3109/LM3107 PLC
++
++(% class="wikigeneratedid" %)
++**1）V-BOX setting**
++
++|(% style="width:208px" %)**Items**|(% style="width:310px" %)**Settings**|(% style="width:365px" %)**Optional**|(% style="width:152px" %)**Note**
++|(% style="width:208px" %)Protocol|(% style="width:310px" %)HollySys LM Modbus RTU|(% style="width:365px" %)HollySys LM Modbus RTU|(% style="width:152px" %)
++|(% style="width:208px" %)Connection|(% style="width:310px" %)RS232|(% style="width:365px" %)RS485|(% style="width:152px" %)
++|(% style="width:208px" %)Baud rate|(% style="width:310px" %)38400|(% style="width:365px" %)38400|(% style="width:152px" %)
++|(% style="width:208px" %)Data bit|(% style="width:310px" %)8|(% style="width:365px" %)8|(% style="width:152px" %)
++|(% style="width:208px" %)Parity|(% style="width:310px" %)None|(% style="width:365px" %)None|(% style="width:152px" %)
++|(% style="width:208px" %)Stop bit|(% style="width:310px" %)1|(% style="width:365px" %)1|(% style="width:152px" %)
++|(% style="width:208px" %)Device station No.|(% style="width:310px" %)1|(% style="width:365px" %)1|(% style="width:152px" %)
++
++**2）Address List**
++
++|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
++|Bit|QX|QXDDDDD.o|0~~99999.7|
++|Bit|IX|IXDDDDD.o|0~~99999.7|
++|Bit|MX|MXDDDDD.o|0~~99999.7|
++|Word|QW|QWDDDDD|0~~99999|
++|Word|IW|IWDDDDD|0~~99999|
++|Word|MW|MWDDDDD|0~~99999|
++|Word|MD|MDDDDDD|0~~99999|
++
++**Cable Wiring**
++
++RS232
++
++(% style="text-align:center" %)
++[[image:HollySysRS232.png]]
++
++RS485
++
++(% style="text-align:center" %)
++[[image:Hollysys LM Modbus RTU.gif]]
++
++= **Siemens ** =
++
++== **S7-200 Smart Ethernet ** ==
++
++[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20S7-200%20Smart.zip]]
++
++== **S7-300 Ethernet ** ==
++
  Supported Series: Siemens S7-300 series PLC
  **1）V-BOX setting**
@@ -586,11 +586,11 @@
  )))
  )))
--== **S7-1200 Ethernet Protocol** ==
++== **S7-1200 Ethernet ** ==
  [[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
--== **S7-XXX Ethernet Protocol** ==
++== **S7-XXX Ethernet l** ==
  Supported Series: Siemens S7-400, S7-1200 and S7-1500
@@ -704,10 +704,101 @@
  [[image:image-20220824162342-2.png]]
--= Create communication with **Mitsubishi PLC** =
++== **LOGO Ethernet ** ==
--== **FX1S，1N，2N Serial Protocol** ==
++Supported Series: Siemens Logo 0BA0, 0BA1 series
++**V-BOX Settings**
++
++
++|**Items**|**Settings**|**Note**
++|Protocol|Siemens LOGO|
++|Connection|Ethernet|
++|Port No.|102|
++|PLC station No.|2|
++
++**Address List**
++
++
++|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
++|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
++|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
++|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
++|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
++|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
++|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
++|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
++|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
++|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
++|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
++|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
++|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
++|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
++|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
++|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
++
++**PLC Settings in LOGO Software:**
++
++Click [Tools]~-~-[Ethernet Connections],shown as below.
++
++(% style="text-align:center" %)
++[[image:PIStudio.12\.PLC protocols.WebHome@12.PLC Protocol_html_8b9d2322edf89519.png]]
++
++Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
++
++(% style="text-align:center" %)
++[[image:PIStudio.12\.PLC protocols.WebHome@image-20221228142937-4.png]]
++
++**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
++
++(% style="text-align:center" %)
++[[image:PIStudio.12\.PLC protocols.WebHome@image-20221228143047-5.png]]
++
++ **Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
++
++(% style="text-align:center" %)
++[[image:PIStudio.12\.PLC protocols.WebHome@image-20221228143246-6.png]]
++
++**V-BOX Communication Settings**
++
++Set PLC IP in [IP Address] settings;
++
++(% style="text-align:center" %)
++[[image:LldwDGntf4.png]]
++
++Enable V-BOX Ethernet in [Network];
++
++(% style="text-align:center" %)
++[[image:WgvjfWbQif.png]]
++
++TSAP setting
++
++* The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
++
++{{code language="LUA"}}
++function init.main()
++addr_setword("@W_0#HSW1200",8192) -- Set the source TSAP address
++addr_setword("@W_0#HSW1201",4096) -- Set the destination TSAP address
++end
++{{/code}}
++
++Note: The name of the test script is init, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
++
++**✎Note:**
++
++* **Communication port configuration: **
++** Continuous length needs to be set to 0.
++** Integration interval needs to be set to 1. (no change may result in data errors)
++** Set Port and Device Station NO.
++** Other set as defaulted.
++* **Notes on the use of registers:**
++** Register VD: Use only registers that are multiples of 4, such as 0, 4, 8, etc.
++** Register VW: Use only registers thay are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )
++
++= **Mitsubishi ** =
++
++== **FX1S，1N，2N Serial ** ==
++
  Supported Series: Mitsubishi FX1S, FX1N, FX2N series
  **1）V-BOX Settings**
@@ -753,7 +753,7 @@
  [[image:image-20220825100845-4.png]]
--== **FX3U，3G，3GA Serial Protocol** ==
++== **FX3U，3G，3GA Serial ** ==
  Supported Series: Mitsubishi FX3U, FX3G, FX3GA series
@@ -800,7 +800,7 @@
  [[image:image-20220825100845-4.png]]
--== **FX3U Ethernet Protocol** ==
++== **FX3U Ethernet ** ==
  Supported Modules: FX3U-ENET-ADP, FX3U-ENET-L
@@ -895,7 +895,7 @@
  [[image:image-20221119101946-2.png||height="395" width="695"]]
--== **FX5U Serial Protocol** ==
++== **FX5U Serial ** ==
  Mitsubishi FX5U series PLC
@@ -977,7 +977,7 @@
  [[image:image-20220825105533-3.png]]
--== **FX5U Ethernet Protocol** ==
++== **FX5U Ethernet ** ==
  Mitsubishi FX5U series PLC
@@ -1053,7 +1053,7 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--== **L02 Serial Protocol** ==
++== **L02 Serial ** ==
  Mitsubishi L02 series CPU built-in serial port.
@@ -1113,7 +1113,7 @@
  [[image:image-20220825160820-4.png]]
--== **L02 Ethernet Protocol** ==
++== **L02 Ethernet ** ==
  Mitsubishi L series CPU built-in Ethernet port.
@@ -1186,13 +1186,13 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--== **Q12H Serial Protocol** ==
++== **Q12H Serial ** ==
  This Demo shows V-BOX communicate with Q12H PLC by Q02H serial Protocol
  [[**Download link**>>https://ftp.we-con.com.cn/Download/WIKI/PI%20HMI/Demo/Communication/V-Box%20connect%20PLC%20Q12H.rar]]
--== **QJ71E71 Ethernet Protocol** ==
++== **QJ71E71 Ethernet ** ==
  Mitsubishi QJ71E71 Ethernet communication module;
@@ -1267,9 +1267,9 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.PLC Protocol_html_2297240b57346b2a.png"]]
--= Create communication with **Delta PLC** =
++= **Delta** =
--== **DVP Ethernet Protocol** ==
++== **DVP Ethernet** ==
  Supoort Series: DELTA DVP20/32/40/60ES200RE/200TE or any DVP models with built-in Ethernet port, DELTA DVPEN01-SL module
@@ -1334,7 +1334,7 @@
  (% style="text-align:center" %)
  [[image:DVPEthernetVNETPortocol.png]]
--== **DVP serial protocol** ==
++== **DVP serial** ==
  Supoort Series: DELTA DVP EH/ES/SS/EX/EH2/SV/SA/SC/SX
@@ -1370,7 +1370,7 @@
  (% style="text-align:center" %)
  [[image:Delta DVP PROTOCOLSerial232.png]]
--== **AS Ethernet Protocol** ==
++== **AS Ethernet** ==
  **1）V-BOX Settings**
@@ -1415,19 +1415,18 @@
  [[image:image-20220831155157-3.png]]
--= Create communication with **Omron PLC** =
++= **Omron** =
--== **CP1 Series Protocol ** ==
++== **CP1 Series** ==
--[[下载链接>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CP1%20Series.zip]]
++[[Download>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CP1%20Series.zip]]
--== **CP2M Series Protocol** ==
++== **CP2M Series** ==
--[[下载链接>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CJ2M.zip]]
++[[Download>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CJ2M.zip]]
++== **EC55 Series ** ==
--== **EC55 Series Protocol** ==
--
  Supported device: EC55 temperature instrument
  **1）V-BOX Settings**
@@ -1487,9 +1487,9 @@
  * Please set the communication delay time of 10ms in setting, to avoid that the instrument may not be able to communicate in a short time due to too fast data access and too much connection requests.
  * [[image:image-20220831161356-1.png]]Because of the particularity of the instrument, it is necessary to write the value of the address in the menu interface corresponding to the address, and to enter the menu where the address locates, so that the value could be written.
--= Create communication with Xinje** PLC** =
++= Xinje =
--== **XC serial protocol** ==
++== **XC serial** ==
  **1）V-BOX Settings**
@@ -1531,7 +1531,7 @@
  [[image:image-20220831163441-4.png]]
--== **XD serial protocol** ==
++== **XD serial** ==
  **1）V-BOX Settings**
@@ -1605,7 +1605,7 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/image-20220830160232-3.png?rev=1.1||alt="image-20220830160232-3.png"]]
--= Create communication with **Schneider PLC** =
++= **Schneider** =
  == **Schneider MODBUS RTU** ==
@@ -1639,9 +1639,9 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/image-20220817154212-1.jpeg?width=554&height=315&rev=1.1||alt="image-20220817154212-1.jpeg" height="315" width="554"]]
--= Create communication with Inovance** PLC** =
++= Inovance =
--== **H3U serial protocol** ==
++== **H3U serial** ==
  **1）V-BOX Settings**
@@ -1691,9 +1691,9 @@
  [[image:image-20220831164731-4.png]]
--= Create communication with Panasonic** PLC** =
++= Panasonic =
--== **FP serial protocol** ==
++== **FP serial** ==
  **1）V-BOX Settings**
@@ -1741,9 +1741,9 @@
  [[image:image-20220831165008-1.png]]
--= Create communication with LS** PLC** =
++= LS =
--== **XBC serial protocol** ==
++== **XBC serial** ==
  **1）V-BOX Settings**
@@ -1795,7 +1795,7 @@
  [[image:image-20220831170215-2.png]]
--== **XGK FEnet Ethernet protocol** ==
++== **XGK FEnet Ethernet** ==
  Supported Series: LS XGT series XGK CPU with XGL-EFMT Ethernet module
@@ -1838,8 +1838,76 @@
  [[image:https://docs.we-con.com.cn/bin/download/PIStudio/12.PLC%20protocols/WebHome/12.PLC%20Protocol_html_2297240b57346b2a.png?width=401&height=170&rev=1.1||alt="12.可编程逻辑控制器Protocol_html_2297240b57346b2a.png" height="170" width="401"]]
--= Create communication with **Modbus ** =
++= INVT =
++**1）V-BOX setting**
++
++|**Item**|**Settings**|**Note**
++|Protocol|INVT_IVC2L|
++|Connection|RS232|
++|Baud rate|19200|
++|Data bit|8|
++|Parity|EVEN|
++|Stop bit|1|
++|PLC station No.|1
++
++**2）Address List**
++
++
++|**Type**|**Device registers**|**Format**|**Range**|**Note**
++|(% colspan="1" rowspan="7" %)Bit|X|XOOO|0~~377|
++|Y|YOOO|0~~377|
++|M|MDDDD|0~~1999|
++|SM|SMDDD|0~~255|
++|S|SDDD|0~~991|
++|T|TDDD|0~~255|
++|C|CDDD|0~~255|
++|(% rowspan="5" %)Word|D|DDDDD|0~~7999|
++|SD|SDDDD|0~~255|
++|Z|ZDD|0~~15|
++|T|TDDD|0~~255|
++|C|CDDD|0~~199|
++|Double word|C|CDDD|200~~255|
++
++**3）Communication Settings**
++
++(% style="text-align:center" %)
++[[image:盒子创建英威腾.png]]
++
++**4）PLC software**
++
++(% style="text-align:center" %)
++[[image:英威腾软件.png]]
++
++**5）PLC setting **
++
++Open the INVI plc software, create a new project or open a project that has already been created
++
++(% style="text-align:center" %)
++[[image:英威腾创建1.png]]
++
++Configure serial port parameters.
++
++(% style="text-align:center" %)
++[[image:英威腾创建2.png]]
++
++PC connect PLC
++
++(% style="text-align:center" %)
++[[image:英威腾创建3.png]]
++
++Download
++
++(% style="text-align:center" %)
++[[image:英威腾下载.png]]
++
++**6）Cable Wiring**
++
++(% style="text-align:center" %)
++[[image:wire.png]]
++
++= **Modbus ** =
++
  == **MODBUS RTU Slave (All function)** ==
  Select the protocol "Modbus RTU Slave (All Fuction)",
@@ -1849,6 +1849,86 @@
  (% style="text-align:center" %)
  [[image:1624342015914-382.png||height="486" width="800" class="img-thumbnail"]]
++== **Modbus Meter** ==
++
++The following example is using the Linfee meter LNF96EY to demonstrate how to set up the Modbus communication.
++
++~1. Wiring the RS485 cable first. Because the pin 58 is A, the pin 59 is B for meter. Here we use the COM1 to connect. So the diagram like follows:
++
++(% style="text-align:center" %)
++[[image:LinfeeTerminalDiagram.png]]
++
++2. Check the specific Modbus parameter in the communication menu from LED display.
++
++So from the following pictures, we can know the Meter Address is 85, Baud rate is 9600, CRC None.
++
++{{info}}
++**✎Note: **Meter address usually corresponding to the Modbus Slave Station No. on the Modbus communication.
++{{/info}}
++
++(% style="text-align:center" %)
++[[image:MeterModbusAllView.png]]
++
++(% class="wikigeneratedid" %)
++3. Set up the communication in the Configuration tab.
++
++(% class="wikigeneratedid" %)
++Select the protocol as **ModBus RTU Slave (All Function)**. And set the communication parameters like below.
++
++(% style="text-align:center" %)
++[[image:VNETCommunicationtabmeter.png]]
++
++(% class="wikigeneratedid" %)
++4. Create new real-time monitoring tag accroding to Modbus manual
++
++(% class="wikigeneratedid" %)
++Enter the address we want to read from the meter. The following table is intercept part of the manual for Linfee Modbus manual.
++
++(% class="wikigeneratedid" %)
++**0x03/0x04 command data register address**:
++
++(% style="width:1142.22px" %)
++|(% style="display:none" %) |=(% colspan="2" rowspan="1" style="width: 165px;" %)Address(% style="display:none" %) |=Description|=Data Format|=(% style="width: 254px;" %)Data Length(Word)|=(% style="width: 282px;" %)Remark
++|(%%)(% style="display:none" %) (%%) HEX|(% style="width:107px" %)DEC|(%%)(% style="display:none" %)  (%%) |(% style="width:100px" %) |(%%)(% style="display:none" %) (%%) |(% style="width:318px" %)
++|(% style="width:107px" %)0x00|(% style="width:100px" %)0|Reserved| | |(% style="width:318px" %)
++|(% style="width:107px" %)0x02|(% style="width:100px" %)2|Reserved| | |(% style="width:318px" %)
++|(% style="width:107px" %)0x04|(% style="width:100px" %)4|Reserved| | |(% style="width:318px" %)
++|(% style="width:107px" %)0x06|(% style="width:100px" %)6|Ua|float|2|(% style="width:318px" %)Phase Voltage data, Unit V
++|(% style="width:107px" %)0x08|(% style="width:100px" %)8|Ub|float|2|(% style="width:318px" %)Phase Voltage data, Unit V
++|(% style="width:107px" %)0x0A|(% style="width:100px" %)10|Uc|float|2|(% style="width:318px" %)Phase Voltage data, Unit V
++|(% style="width:107px" %)0x0C|(% style="width:100px" %)12|Uab|float|2|(% style="width:318px" %)Line Voltage data, Unit V
++|(% style="width:107px" %)0x0E|(% style="width:100px" %)14|Ubc|float|2|(% style="width:318px" %)Line Voltage data, Unit V
++|(% style="width:107px" %)0x10|(% style="width:100px" %)16|Uca|float|2|(% style="width:318px" %)Line Voltage data, Unit V
++|(% style="width:107px" %)0x12|(% style="width:100px" %)18|Ia|float|2|(% style="width:318px" %)Phase Current data, Unit A
++|(% style="width:107px" %)0x14|(% style="width:100px" %)20|Ib|float|2|(% style="width:318px" %)Phase Current data, Unit A
++|(% style="width:107px" %)0x16|(% style="width:100px" %)22|Ic|float|2|(% style="width:318px" %)Phase Current data, Unit A
++
++{{info}}
++**✎Note: **We usually use the Data Type 4 for read the Modbus registers(Function Code 03)
++{{/info}}
++
++For example, here we want to read the Phase Voltage Ua (Modbus offset 0006), the Modbus register main No. requires input decimal number, and check whether the actual address has one address offset, so the tag configured like the following screenshot:
++
++(% style="text-align:center" %)
++[[image:VNETModbusTagSettings.png]]
++
++(% style="text-align:center" %)
++[[image:VNETModbusTagByteSettings.png]]
++
++{{info}}
++**✎Note: **If the read value is incorrect, please check whether need to change the Byte order.
++{{/info}}
++
++Set the Modbus Slave Station No.
++
++(% style="text-align:center" %)
++[[image:ModbusStationSettings.png]]
++
++If the communication is setup successfully, the tag will show green light.
++
++(% style="text-align:center" %)
++[[image:Monitoringtaggreenlight.png]]
++
  == **MODBUS RTU Master** ==
  Select the protocol "Modbus RTU Master",
@@ -1944,7 +1944,7 @@
  [[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20VB%20inverter.zip]]
--= **User define protocol** =
++= **User define** =
  More serial port script instruction,please refer manual:[[Lua script function>>doc:V-BOX.V-Net.Manual.04 Lua Script.01 Lua Functions.WebHome]]~-~-->[[3.Serial port operation>>url:http://docs.we-con.com.cn/wiki/vbox/view/HMI/04.Lua%20script%20%20function%20and%20operation/01.Lua%20script%20function/#H3.Serialportoperation]]
@@ -1962,66 +1962,63 @@
  Script Demo:
--~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--
--
++{{code language="lua"}}
  function com.main()
--   ~-~-dosomething
--   openPlc()
++    --dosomething
++    openPlc()
++end
++
++function openPlc()
++  if obj then
++  -- If the serial port opened,then read/write data by timing
++  local wri = string.pack(">HHHH",0X0103,0X0200,0X0003,0X0473)
++  local arr = reading(wri)
++  -- if arr ~=nil then
++   if arr[1] ==33 and arr[2] ==v[2][2] and arr[3] ==v[2][3] then
++     local A = arr[4]*256
++     local B = A+arr[5]
++     -- addr_setword(v[1],B)
++   end
++-- end
++  else
++    --judge if there is a serial object, then initialize and open the serial port
++    local configs = {
++         name = 'COM1', --Select serial port COM1
++         mode = 485, --Communication mode RS485
++         baud_rate = 9600, --Baud rate 9600
++         stop_bit = 1, --stop bit 1
++         data_len = 8, --data length 8
++         check_bit = 'NONE', --no parity
++    }
++    obj,err = serial.open(configs) --Open serial port
++    if not obj then
++      print("serial open :failed", err) -- Open serial port failed
++    end
++  end
   end
-- function openPlc()
--     if obj then
--         ~-~- If the serial port opened,then read/write data by timing
--            local wri = string.pack(">HHHH",0X0103,0X0200,0X0003,0X0473)
--             local arr = reading(wri)
--             ~-~- if arr ~~=nil then
--             ~-~-     if arr[1] ==33 and arr[2] ==v[2][2] and arr[3] ==v[2][3] then
--             ~-~-         local A = arr[4]*256
--             ~-~-         local B = A+arr[5]
--             ~-~-         addr_setword(v[1],B)
--             ~-~-     end
--             ~-~- end
--     else
--         ~-~-judge if there is a serial object, then initialize and open the serial port
--        local configs = {
--             name = 'COM1',      ~-~-Select serial port COM1
--             mode = 485,         ~-~-Communication mode RS485
--             baud_rate = 9600,   ~-~-Baud rate 9600
--             stop_bit = 1,       ~-~-stop bit 1
--            data_len = 8,       ~-~-data length 8
--            check_bit = 'NONE', ~-~-no parity
--
--        }
--         obj,err = serial.open(configs) ~-~-Open serial port
--        if not obj then
--          print("serial open :failed", err) ~-~- Open serial port failed
--                end
++function reading(wri)
++   obj:flush() -- Clear serial port
++   obj:write(wri)-- Write serial port
++   print(string.byte(wri,1,#wri))
++   obj:flush() -- Clear serial port
++   local readed =obj:read(9,1000) -- Read 9 bytes, timeout 1 second
++   if readed and readed ~= "" then
++   -- judge that a non-empty string is read
++     print(string.byte(readed,1,#readed))
++     a={string.byte(readed, 1, #readed)}
++     if nil ~= a[4] and nil ~= a[5] and nil ~= a[6] and nil ~= a[7] then
++       a1=a[4]*256+a[5]
++       a2=a[6]*256+a[7]
++       addr_setword("@HDW0",a1)
++       addr_setword("@HDW1",a2)
       end
-- end
--
-- function reading(wri)
--     obj:flush() ~-~- Clear serial port
--    obj:write(wri)  ~-~- Write serial port
--    print(string.byte(wri,1,#wri))
--     obj:flush() ~-~- Clear serial port
--    local readed =obj:read(9,1000) ~-~- Read 9 bytes, timeout 1 second
--    if readed and readed ~~= "" then
--         ~-~- judge that a non-empty string is read
--        print(string.byte(readed,1,#readed))
--         a={string.byte(readed, 1, #readed)}
--       if nil ~~= a[4] and nil ~~= a[5] and nil ~~= a[6] and nil ~~= a[7] then
--         a1=a[4]*256+a[5]
--         a2=a[6]*256+a[7]
--         addr_setword("@HDW0",a1)
--         addr_setword("@HDW1",a2)
--       end
--         return {string.byte(readed, 1, #readed)}
--     elseif readed == nil then
--         print("serial read err:", err or "")
--         return nil
--     end
++     return {string.byte(readed, 1, #readed)}
++   elseif readed == nil then
++     print("serial read err:", err or "")
       return nil
-- end
--
--~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-
++   end
++   return nil
++end
++{{/code}}

0Il1q9GZgk.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+24.6 KB

Content

1679563870401-671.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.3 KB

Content

1682233464031-639.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+15.9 KB

Content

CCW.Shell_E5Cwj4tUL3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+27.1 KB

Content

ControlStarCommunicate.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+26.0 KB

Content

ControlStarModbus.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+24.9 KB

Content

ControlStarSystemBlock.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+46.3 KB

Content

CrouzetRS232 VBox.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+14.9 KB

Content

Emerson.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+13.7 KB

Content

Ethernet.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+45.5 KB

Content

HollySysRS232.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+10.4 KB

Content

Hollysys LM Modbus RTU.gif

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+7.1 KB

Content

Hollysys485-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+13.5 KB

Content

Hollysys485box.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+13.4 KB

Content

LinfeeTerminalDiagram.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+8.6 KB

Content

LldwDGntf4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+24.3 KB

Content

MeterModbusAddr.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+562.5 KB

Content

MeterModbusAllView.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.6 MB

Content

MeterModbusBaud.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+444.0 KB

Content

MeterModbusPara.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+532.0 KB

Content

ModbusStationSettings.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.8 KB

Content

Monitoringtaggreenlight.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+7.5 KB

Content

V-NET_Client setting.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+41.9 KB

Content

V-NET_Client_ADD.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+51.4 KB

Content

V-NET_Client_KOR0AHEA4M.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+14.2 KB

Content

V-NET_Client_TIiAymnjkx.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+12.8 KB

Content

V-NET_Client_TNBuqy7T5r.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+26.7 KB

Content

V-NET_Client_communication.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.5 KB

Content

V-NET_Client_iKKKhcgxm1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.9 KB

Content

V-NET_Client_t2Rg2wpSoY.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+53.7 KB

Content

VNETCommunicationtabmeter.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+31.0 KB

Content

VNETModbusTagByteSettings.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+31.2 KB

Content

VNETModbusTagSettings.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Hunter

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.7 KB

Content

WgvjfWbQif.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Bob

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.3 KB

Content

conne ab plc.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+43.1 KB

Content

export.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+115.2 KB

Content

export1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+115.2 KB

Content

plc 软件.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+106.8 KB

Content

project create.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+65.5 KB

Content

software.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+25.8 KB

Content

v-net client vers.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+13.1 KB

Content

wire.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+137.2 KB

Content

企业微信截图_16889606174191.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+20.7 KB

Content

盒子创建英威腾.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+86.5 KB

Content

英威腾下载.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+49.0 KB

Content

英威腾创建1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+36.7 KB

Content

英威腾创建2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+115.7 KB

Content

英威腾创建3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+76.6 KB

Content

英威腾软件.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.AiXia

Size

...	...	@@ -1,0 +1,1 @@
	1	+52.6 KB

Content

Changes for page 1 Communication

Summary

Details

Navigation

Table of Contents