Skip to Content

Changes for page 1 Communication

Last modified by Hunter on 2024/07/01 10:54
From version 214.1
edited by Hunter
on 2023/02/04 11:33
Change comment: There is no comment for this version
To version 197.1
edited by Hunter
on 2022/12/13 14:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -176,118 +176,16 @@
176 176  
177 177  The above are all the steps for establishing ethernet communication between V-BOX with LX5V PLC.
178 178  
179 -
180 -
181 181  = Create communication with **Rockwell PLC** =
182 182  
183 -== **DF1 Advanced Protocol** ==
181 +== (% id="cke_bm_5621S" style="display:none" %)** **(%%)**MicroLogix Protocol** ==
184 184  
185 -MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05; PLC-5
186 -
187 -**1) V-Box Settings**
188 -
189 -|=Item|=Recommended |=Note
190 -|=Protocol|Allen Bradley DF1 Advanced|
191 -|=Connection|RS232|
192 -|=Baud rate|19200|
193 -|=Stop bits|1|
194 -|=Data bits|8|
195 -|=Parity|None|
196 -|=PLC Station No.|1|
197 -|=HMI Station No.|0|
198 -
199 -**2) Address List**
200 -
201 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=Note
202 -|(% colspan="1" rowspan="7" %)Bit|I1|I1ddd.dd|0.0~~255.15|Only able to communicate with file number I1
203 -|O0|O0ddd.dd|0.0~~255.15|Only able to communicate with file number O0
204 -|S2|S2ddd.dd|0.0~~255.15|Only able to communicate with file number S2
205 -|B3|B3ddd.dd|0.0~~255.15|Only able to communicate with file number B3
206 -|BN|BNddddd.dd|0.0~~99255.15|(((
207 -Bit data file B0~~B99
208 -
209 -First two digits is for file number
210 -
211 -For example, BN13001.00 represents file number B13, address 001, the 0th bit.
212 -)))
213 -|N7|N7ddd.dd|0.0~~255.15|Only able to communicate with file number N7
214 -|NN|NNddddd.dd|0.0~~99255.15|(((
215 -Integer data file bit format N0~~N99
216 -
217 -First two digits is for file number
218 -
219 -For example, NN13001.00 represents file number N13, address 001, the 0th bit.
220 -)))
221 -|(% rowspan="11" %)Word|S2|S2ddd|0~~255|Only able to communicate with file number S2
222 -|T4S|T4Sddd|0~~255|Only able to communicate with file number T4 (Timer Preset Value)
223 -|T4P|T4Pddd|0~~255|Only able to communicate with file number T4 (Timer Accumulator Value)
224 -|TNS|TNSddddd|0~~99255|(((
225 -Timer Preset Value
226 -
227 -First two digits is for file number
228 -
229 -For example, TNS99255 represents file number T99, address 255.
230 -)))
231 -|TNP|TNPddddd|0~~99255|(((
232 -Timer Accumulator Value
233 -
234 -First two digits is for file number
235 -
236 -For example, TNP99255 represents file number T99, address 255.
237 -)))
238 -|C5S|C5Sddd|0~~255|Only able to communicate with file number C5 (Counter Preset Value)
239 -|C5P|C5Pddd|0~~255|Only able to communicate with file number C5 (Counter Accumulator Value)
240 -|CNS|CNSddddd|0~~99255|(((
241 -Counter Preset Value
242 -
243 -First two digits is for file number
244 -
245 -For example, CNS99255 represents file number C99, address 255.
246 -)))
247 -|CNP|CNPddddd|0~~99255|(((
248 -Counter Accumulator Value
249 -
250 -First two digits is for file number
251 -
252 -For example, CNP99255 represents file number C99, address 255.
253 -)))
254 -|N7|N7ddd|0~~255|Only able to communicate with file number N7
255 -|NN|NNddd|0~~99255|(((
256 -Integer data file
257 -
258 -First two digits is for file number
259 -
260 -For example, NN99255 represents file number N99, address 255.
261 -)))
262 -|(% colspan="1" rowspan="3" %)Double Word|F8|F8ddd|0~~255|(((
263 -Only able to communicate with file number N7
264 -)))
265 -|FN|FNddddd|0~~99255|(((
266 -Floating point data file
267 -
268 -First two digits is for file number
269 -
270 -For example, FN99255 represents file number F99, address 255.
271 -)))
272 -|LN|LNddddd|0~~99255|Long
273 -
274 -**3) Cable Wiring**
275 -
276 -(% style="text-align:center" %)
277 -[[image:ABRS232.gif]]
278 -
279 -(% class="wikigeneratedid" id="HMicroLogixA0Protocol" %)
280 -(% id="cke_bm_5621S" style="display:none" %)** **
281 -
282 -== **MicroLogix Protocol** ==
283 -
284 -(% class="wikigeneratedid" %)
285 285  MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
286 286  
287 287  **1）V-BOX setting**
288 288  
289 289  |**Item**|**Settings**|**Note**
290 -|Protocol|Allen-Bradley DF1 Advanced|
188 +|Protocol|Allen-Bradlley DF1 Advanced|
291 291  |Connection|RS232|
292 292  |Baud rate|19200|
293 293  |Data bit|8|
... ... @@ -710,97 +710,6 @@
710 710  
711 711  [[image:image-20220824162342-2.png]]
712 712  
713 -== **LOGO Ethernet Protocol** ==
714 -
715 -Supported Series: Siemens Logo 0BA0, 0BA1 series
716 -
717 -**V-BOX Settings**
718 -
719 -
720 -|**Items**|**Settings**|**Note**
721 -|Protocol|Siemens LOGO|
722 -|Connection|Ethernet|
723 -|Port No.|102|
724 -|PLC station No.|2|
725 -
726 -**Address List**
727 -
728 -
729 -|**Number**|**Address Type**|**Data Type**|**Range**|**DB Address**|**PLC Address**
730 -|1|RTC|Word|1-7|DB1.DBX984.0|0x001ec0
731 -|2|VB|Byte|0-1469|DB1.DBX0.0|0x000000
732 -|3|VD|Double Word|0-1466|DB1.DBX0.0|0x000000
733 -|4|VW|Word|0-1468|DB1.DBX0.0|0x000000
734 -|5|NAQ|Word|1-32|DB1.DBX1406.0|0x002bf0
735 -|6|NAI|Word|1-64|DB1.DBX1262.0|0x002770
736 -|7|AM|Word|1-64|DB1.DBX1118.0|0x0022f0
737 -|8|AQ|Word|1-16|DB1.DBX1072.0|0x002180
738 -|9|AI|Word|1-16|DB1.DBX1032.0|0x002040
739 -|10|I|Bit|1-64|DB1.DBX1024.0|0x002000
740 -|11|Q|Bit|1-64|DB1.DBX1064.0|0x002140
741 -|12|M|Bit|1-112|DB1.DBX1104.0|0x002280
742 -|13|NI|Bit|1-128|DB1.DBX1246.0|0x0026f0
743 -|14|NQ|Bit|1-128|DB1.DBX1390.0|0x002b70
744 -|15|V|Bit|0-14697|DB1.DBX0.0|0x000000
745 -
746 -**PLC Settings in LOGO Software:**
747 -
748 -Click [Tools]~-~-[Ethernet Connections],shown as below.
749 -
750 -(% style="text-align:center" %)
751 -[[image:PIStudio.12\.PLC protocols.WebHome@12.PLC Protocol_html_8b9d2322edf89519.png]]
752 -
753 -Set Ethernet connection parameter. IP, Subnet Mask, shown as below.
754 -
755 -(% style="text-align:center" %)
756 -[[image:PIStudio.12\.PLC protocols.WebHome@image-20221228142937-4.png]]
757 -
758 -**TSAP set**:The value set by local TSAP is the remote TSAP set in HMI. PLC's remote TSAP is the opposite,shown as below.
759 -
760 -(% style="text-align:center" %)
761 -[[image:PIStudio.12\.PLC protocols.WebHome@image-20221228143047-5.png]]
762 -
763 - **Download Project**: Click "Address book" to add the IP address to be downloaded (fi."Detect" to check whether the IP address can be detected. Then click “ok”, and the system will prompt that PLC will be "STOP" mode. Click “YES” to start download.
764 -
765 -(% style="text-align:center" %)
766 -[[image:PIStudio.12\.PLC protocols.WebHome@image-20221228143246-6.png]]
767 -
768 -**V-BOX Communication Settings**
769 -
770 -Set PLC IP in [IP Address] settings;
771 -
772 -(% style="text-align:center" %)
773 -[[image:LldwDGntf4.png]]
774 -
775 -Enable V-BOX Ethernet in [Network];
776 -
777 -(% style="text-align:center" %)
778 -[[image:WgvjfWbQif.png]]
779 -
780 -TSAP setting
781 -
782 -* The initialization script needs to set the source TSAP address and the target TSAP address, otherwise the communication will not be successful.
783 -
784 -{{code language="LUA"}}
785 -function init.main()
786 -addr_setword("@W_0#HSW1200",8192) -- Set the source TSAP address
787 -addr_setword("@W_0#HSW1201",4096) -- Set the destination TSAP address
788 -end
789 -{{/code}}
790 -
791 -Note: The name of the test script is init, 8192 and 4096 are the data used for the test, there is no HSW address in the register option, but you can directly set the value of the corresponding address through the code.
792 -
793 -**✎Note:**
794 -
795 -* **Communication port configuration: **
796 -** Continuous length needs to be set to 0.
797 -** Integration interval needs to be set to 1. (no change may result in data errors)
798 -** Set Port and Device Station NO.
799 -** Other set as defaulted.
800 -* **Notes on the use of registers:**
801 -** Register VD: Use only registers that are multiples of 4, such as 0, 4, 8, etc.
802 -** Register VW: Use only registers thay are multiples of 2, such as 0, 2, 4 etc. (Using an odd-length register may result in data errors, such as 2 3 4 )
803 -
804 804  = Create communication with **Mitsubishi PLC** =
805 805  
806 806  == **FX1S，1N，2N Serial Protocol** ==
... ... @@ -1958,7 +1958,7 @@
1958 1958  **address list**
1959 1959  
1960 1960  (% class="table-bordered" %)
1961 -|=(% scope="row" %)**Type**|=**Data Type**|=**Function code and description**
1768 +|**Type**|**Data Type**|**Function code and description**
1962 1962  |(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (Read Input Registers: Read the current binary value in one or more input registers)
1963 1963  |06 (write single register: write a binary value to a holding register)
1964 1964  |10 (write values to multiple addresses )
... ... @@ -1998,7 +1998,7 @@
1998 1998  
1999 1999  **2）Address List**
2000 2000  
2001 -|=**Type**|=**Data Type**|=**Function code & Description**
1808 +|**Type**|**Register**|**Function code & Description**
2002 2002  |(% rowspan="11" %)Word|(% rowspan="3" %)3|04 (read input register: read current binary value in one or more input registers)
2003 2003  |06 (write single register: write a binary value to a holding register)
2004 2004  |10 (write values to multiple addresses )
0Il1q9GZgk.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -24.6 KB
Content
AB.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -7.3 KB
Content
ABRS232.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -7.3 KB
Content
LldwDGntf4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -24.3 KB
Content
WgvjfWbQif.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bob
Size
... ... @@ -1,1 +1,0 @@
1 -36.3 KB
Content