Skip to Content

Changes for page 1 Communication

Last modified by Hunter on 2024/07/01 10:54
From version 246.2
edited by Hunter
on 2023/07/05 12:02
Change comment: There is no comment for this version
To version 226.1
edited by Hunter
on 2023/03/23 17:44
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -519,92 +519,6 @@
519 519  (((
520 520  The above are all the steps for establishing Ethernet communication between Wecon V-box with CompactLogix L1769 PLC.
521 521  
522 -
523 -== **Micro850_FreeTag Protocol（new）** ==
524 -
525 -This example introduces the establishment of Ethernet communication between Wecon V-box and 2080-LC50-48QWB,Micro850. It is introduced through three parts: PLC software configuration, V-box software configuration.
526 -
527 -(% class="wikigeneratedid" id="HSoftwareconfigurationofPLC" %)
528 -(((
529 -**Software configuration of PLC**
530 -)))
531 -
532 -(% class="wikigeneratedid" id="HPLCprogrammingsoftware" %)
533 -(((
534 -**1）PLC programming software：Connected Components Workbench™**
535 -
536 -(% style="text-align:center" %)
537 -[[image:software.png]]
538 -
539 -**2）New PLC project**
540 -
541 -Click New Project and select the PLC model.
542 -
543 -(% style="text-align:center" %)
544 -[[image:project create.png]]
545 -
546 -**3）Set Ethernet parameters**
547 -
548 -Follow the steps below to configure Ethernet parameters
549 -
550 -PLC IP address：192.168.39.56
551 -
552 -default gateway：192.168.39.1
553 -
554 -subnet mask：255.255.255.0
555 -
556 -(% style="text-align:center" %)
557 -[[image:Ethernet.png]]
558 -
559 -**4）connect PLC**
560 -
561 -**When downloading the setting, need to change the status of the PLC to PRG**
562 -
563 -(% style="text-align:center" %)
564 -[[image:conne ab plc.png]]
565 -
566 -**V-box software configuration**
567 -
568 -**1）V-box programming software**
569 -
570 -(% style="text-align:center" %)
571 -[[image:v-net client vers.png]]
572 -
573 -**2）Set communication port parameters**
574 -
575 -In the device list on the left, find the Vbox that communicates with the L1769, click it and select configuration,communication port configuration in the main interface to add a communication protocol.
576 -
577 -(% style="text-align:center" %)
578 -[[image:V-NET_Client_t2Rg2wpSoY.png]]
579 -
580 -The communication port is selected as Ethernet, the device type is selected as Allen-Bradley, the protocol is Allen-BradleyMicro850_FreeTag EthemetIP, and the IP is the internal IP address of the L1769 PLC. The port number is 44818.
581 -
582 -(% style="text-align:center" %)
583 -[[image:V-NET_Client_communication.png]]
584 -
585 -Export variables from PLC, select CSV file, comma delimited.(% id="cke_bm_1950S" style="display:none" %)
586 -
587 -(% style="text-align:center" %)
588 -[[image:export1.png]]
589 -
590 -(% style="text-align:center" %)
591 -[[image:CCW.Shell_E5Cwj4tUL3.png]]
592 -
593 -After adding the protocol Allen-BradleyMicro850_FreeTag, click[[image:https://docs.we-con.com.cn/bin/download/V-BOX/V-Net/Training/1%20Communication/WebHome/image-20220714143838-2.png?rev=1.1||alt="image-20220714143838-2.png"]]icon add label.
594 -
595 -(% style="text-align:center" %)
596 -[[image:V-NET_Client_TNBuqy7T5r.png]]
597 -
598 -**3）Engineering production**
599 -
600 -According to your own needs, use the V-NET client software to edit the required data monitoring points.
601 -
602 -(% style="text-align:center" %)
603 -[[image:V-NET_Client_KOR0AHEA4M.png]]
604 -
605 -
606 -)))
607 -
608 608  == **Ethernet DF1 Protocol** ==
609 609  
610 610  [[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Allen-Bradley%20Ethernet%20DF1.zip]]
... ... @@ -663,140 +663,6 @@
663 663  **✎Note: **As the wiring diagram indicated, this protocol requires the DB9 serial port pin 4. But pin 4 is undefined for all V-Box, so it need the user to solder a Pull-up resistor to make the pin 4 working. As for how to solder the resistor on the motherboard, please contact with Wecon technical support for the details.
664 664  {{/info}}
665 665  
666 -= Create communication with EMERSON PLC =
667 -
668 -= **RTU Slave Protocol** =
669 -
670 -Supported series: EC10 series
671 -
672 -**1）V-BOX setting**
673 -
674 -|**Items**|**Settings**|**Note**
675 -|Protocol|Emerson 984 RTU Slave MODBUS|
676 -|Connection|RS485|
677 -|Baud rate|19200|
678 -|Data bit|8|
679 -|Parity|EVEN|
680 -|Stop bit|1|
681 -|Device station No.|1|Need to be same as the PLC setting
682 -
683 -(% class="wikigeneratedid" %)
684 -**2）PLC Setting**
685 -
686 -(% class="wikigeneratedid" %)
687 -Remember to use the Control Star to enable the Modbus RTU communication for port 1 in system block before dowload into PLC.
688 -
689 -(% style="text-align:center" %)
690 -[[image:ControlStarSystemBlock.png]]
691 -
692 -(% style="text-align:center" %)
693 -[[image:ControlStarCommunicate.png]]
694 -
695 -(% style="text-align:center" %)
696 -[[image:ControlStarModbus.png]]
697 -
698 -(% class="wikigeneratedid" %)
699 -**3）Address List**
700 -
701 -|**Type**|**Device registers**|**Format**|**Range**|**Note**
702 -|(% colspan="1" rowspan="12" %)Bit|Y|YOOO|0~~377|
703 -|X|XOOO|0~~377|
704 -|M0|M0DDDD|0~~2047|
705 -|M1|M1DDDDD|2048~~10239|
706 -|SM0|SM0DDD|0~~255|
707 -|SM1|SM1DDD|256~~511|
708 -|S0|S0DDDD|0~~1023|
709 -|S1|S1DDDD|1024~~4095|
710 -|T0|T0DDD|0~~255|
711 -|T1|T1DDD|256~~511|
712 -|C0|C0DDD|0~~255|
713 -|C1|C1DDD|256~~306|
714 -|(% colspan="1" rowspan="7" %)Word|D|DDDDD|0~~7999|
715 -|Z|ZDD|0~~15|
716 -|TW0|TW0DDD|0~~255|
717 -|TW1|TW1DDD|256~~511|
718 -|SD0|SD0DDD|0~~255|
719 -|SD1|SD1DDD|256~~511|
720 -|CW|CWDDD|0~~306|
721 -|(% colspan="1" rowspan="2" %)Double Word|CW0|CW0DDD|200~~255|
722 -|CW1|CW1DDDDD|256~~99999|
723 -
724 -**4) Cable Wiring**
725 -
726 -(% style="text-align:center" %)
727 -[[image:Emerson.png]]
728 -
729 -= Create communication with HollySys PLC =
730 -
731 -== **LK Modbus RTU** ==
732 -
733 -Supported Series: HollySys LK series PLC
734 -
735 -**1）V-BOX setting**
736 -
737 -|**Items**|**Settings**|**Note**
738 -|Protocol|HollySys LK Modbus RTU|
739 -|Connection|RS485|
740 -|Baud rate|38400|
741 -|Data bit|8|
742 -|Parity|None|
743 -|Stop bit|1|
744 -|Device station No.|1|
745 -
746 -**2）Address List**
747 -
748 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
749 -|Bit|QX|QXDDDDD.dd|0~~65535.15|
750 -|Bit|IX|IXDDDDD.dd|0~~65535.15|
751 -|Bit|MX|MXDDDDD.dd|0~~65535.15|
752 -|Word|QW|QWDDDDD|0~~99999|
753 -|Word|IW|IWDDDDD|0~~99999|
754 -|Word|MW|MWDDDDD|0~~99999|
755 -|Word|MD|MDDDDDD|0~~99999|
756 -
757 -**3）Cable Wiring**
758 -
759 -(% style="text-align:center" %)
760 -[[image:Hollysys485-2.png]]
761 -
762 -== **LM Modbus RTU** ==
763 -
764 -(% class="wikigeneratedid" %)
765 -Supported Series: HollySys LM3109/LM3107 PLC
766 -
767 -(% class="wikigeneratedid" %)
768 -**1）V-BOX setting**
769 -
770 -|(% style="width:208px" %)**Items**|(% style="width:310px" %)**Settings**|(% style="width:365px" %)**Optional**|(% style="width:152px" %)**Note**
771 -|(% style="width:208px" %)Protocol|(% style="width:310px" %)HollySys LM Modbus RTU|(% style="width:365px" %)HollySys LM Modbus RTU|(% style="width:152px" %)
772 -|(% style="width:208px" %)Connection|(% style="width:310px" %)RS232|(% style="width:365px" %)RS485|(% style="width:152px" %)
773 -|(% style="width:208px" %)Baud rate|(% style="width:310px" %)38400|(% style="width:365px" %)38400|(% style="width:152px" %)
774 -|(% style="width:208px" %)Data bit|(% style="width:310px" %)8|(% style="width:365px" %)8|(% style="width:152px" %)
775 -|(% style="width:208px" %)Parity|(% style="width:310px" %)None|(% style="width:365px" %)None|(% style="width:152px" %)
776 -|(% style="width:208px" %)Stop bit|(% style="width:310px" %)1|(% style="width:365px" %)1|(% style="width:152px" %)
777 -|(% style="width:208px" %)Device station No.|(% style="width:310px" %)1|(% style="width:365px" %)1|(% style="width:152px" %)
778 -
779 -**2）Address List**
780 -
781 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
782 -|Bit|QX|QXDDDDD.o|0~~99999.7|
783 -|Bit|IX|IXDDDDD.o|0~~99999.7|
784 -|Bit|MX|MXDDDDD.o|0~~99999.7|
785 -|Word|QW|QWDDDDD|0~~99999|
786 -|Word|IW|IWDDDDD|0~~99999|
787 -|Word|MW|MWDDDDD|0~~99999|
788 -|Word|MD|MDDDDDD|0~~99999|
789 -
790 -**Cable Wiring**
791 -
792 -RS232
793 -
794 -(% style="text-align:center" %)
795 -[[image:HollySysRS232.png]]
796 -
797 -RS485
798 -
799 -
800 800  = Create communication with **Siemens PLC** =
801 801  
802 802  == **S7-200 Smart Ethernet Protocol** ==
... ... @@ -2274,7 +2274,7 @@
2274 2274  **✎Note: **We usually use the Data Type 4 for read the Modbus registers(Function Code 03)
2275 2275  {{/info}}
2276 2276  
2277 -For example, here we want to read the Phase Voltage Ua (Modbus offset 0006), the Modbus register main No. requires input decimal number, and check whether the actual address has one address offset, so the tag configured like the following screenshot:
2057 +For example, here we want to read the Phase Voltage Ua (Modbus offset 0006), Mod, so the tag configured like the following screenshot:
2278 2278  
2279 2279  (% style="text-align:center" %)
2280 2280  [[image:VNETModbusTagSettings.png]]
... ... @@ -2296,6 +2296,8 @@
2296 2296  (% style="text-align:center" %)
2297 2297  [[image:Monitoringtaggreenlight.png]]
2298 2298  
2079 +
2080 +
2299 2299  == **MODBUS RTU Master** ==
2300 2300  
2301 2301  Select the protocol "Modbus RTU Master",
1682233464031-639.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -15.9 KB
Content
CCW.Shell_E5Cwj4tUL3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -27.1 KB
Content
ControlStarCommunicate.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -26.0 KB
Content
ControlStarModbus.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
ControlStarSystemBlock.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
Emerson.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -13.7 KB
Content
Ethernet.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -45.5 KB
Content
HollySysRS232.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -10.4 KB
Content
Hollysys485-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -13.5 KB
Content
Hollysys485box.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -13.4 KB
Content
V-NET_Client setting.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
V-NET_Client_ADD.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -51.4 KB
Content
V-NET_Client_KOR0AHEA4M.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -14.2 KB
Content
V-NET_Client_TIiAymnjkx.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -12.8 KB
Content
V-NET_Client_TNBuqy7T5r.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -26.7 KB
Content
V-NET_Client_communication.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
V-NET_Client_iKKKhcgxm1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -35.9 KB
Content
V-NET_Client_t2Rg2wpSoY.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -53.7 KB
Content
conne ab plc.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -43.1 KB
Content
export.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -115.2 KB
Content
export1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -115.2 KB
Content
project create.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -65.5 KB
Content
software.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -25.8 KB
Content
v-net client vers.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content