Skip to Content

Changes for page 1 Communication

Last modified by Hunter on 2024/07/01 10:54
From version 248.1
edited by Theodore Xu
on 2023/07/10 11:07
Change comment: There is no comment for this version
To version 226.1
edited by Hunter
on 2023/03/23 17:44
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.AiXia
1 +XWiki.Hunter
Content
... ... @@ -1,5 +3,3 @@
1 -= Create communication with INVT =
2 -
3 3  = Create communication with WECON PLC =
4 4  
5 5  == **LX3V Serial Protocol** ==
... ... @@ -521,92 +521,6 @@
521 521  (((
522 522  The above are all the steps for establishing Ethernet communication between Wecon V-box with CompactLogix L1769 PLC.
523 523  
524 -
525 -== **Micro850_FreeTag Protocol（new）** ==
526 -
527 -This example introduces the establishment of Ethernet communication between Wecon V-box and 2080-LC50-48QWB,Micro850. It is introduced through three parts: PLC software configuration, V-box software configuration.
528 -
529 -(% class="wikigeneratedid" id="HSoftwareconfigurationofPLC" %)
530 -(((
531 -**Software configuration of PLC**
532 -)))
533 -
534 -(% class="wikigeneratedid" id="HPLCprogrammingsoftware" %)
535 -(((
536 -**1）PLC programming software：Connected Components Workbench™**
537 -
538 -(% style="text-align:center" %)
539 -[[image:software.png]]
540 -
541 -**2）New PLC project**
542 -
543 -Click New Project and select the PLC model.
544 -
545 -(% style="text-align:center" %)
546 -[[image:project create.png]]
547 -
548 -**3）Set Ethernet parameters**
549 -
550 -Follow the steps below to configure Ethernet parameters
551 -
552 -PLC IP address：192.168.39.56
553 -
554 -default gateway：192.168.39.1
555 -
556 -subnet mask：255.255.255.0
557 -
558 -(% style="text-align:center" %)
559 -[[image:Ethernet.png]]
560 -
561 -**4）connect PLC**
562 -
563 -**When downloading the setting, need to change the status of the PLC to PRG**
564 -
565 -(% style="text-align:center" %)
566 -[[image:conne ab plc.png]]
567 -
568 -**V-box software configuration**
569 -
570 -**1）V-box programming software**
571 -
572 -(% style="text-align:center" %)
573 -[[image:v-net client vers.png]]
574 -
575 -**2）Set communication port parameters**
576 -
577 -In the device list on the left, find the Vbox that communicates with the L1769, click it and select configuration,communication port configuration in the main interface to add a communication protocol.
578 -
579 -(% style="text-align:center" %)
580 -[[image:V-NET_Client_t2Rg2wpSoY.png]]
581 -
582 -The communication port is selected as Ethernet, the device type is selected as Allen-Bradley, the protocol is Allen-BradleyMicro850_FreeTag EthemetIP, and the IP is the internal IP address of the L1769 PLC. The port number is 44818.
583 -
584 -(% style="text-align:center" %)
585 -[[image:V-NET_Client_communication.png]]
586 -
587 -Export variables from PLC, select CSV file, comma delimited.(% id="cke_bm_1950S" style="display:none" %)
588 -
589 -(% style="text-align:center" %)
590 -[[image:export1.png]]
591 -
592 -(% style="text-align:center" %)
593 -[[image:CCW.Shell_E5Cwj4tUL3.png]]
594 -
595 -After adding the protocol Allen-BradleyMicro850_FreeTag, click[[image:https://docs.we-con.com.cn/bin/download/V-BOX/V-Net/Training/1%20Communication/WebHome/image-20220714143838-2.png?rev=1.1||alt="image-20220714143838-2.png"]]icon add label.
596 -
597 -(% style="text-align:center" %)
598 -[[image:V-NET_Client_TNBuqy7T5r.png]]
599 -
600 -**3）Engineering production**
601 -
602 -According to your own needs, use the V-NET client software to edit the required data monitoring points.
603 -
604 -(% style="text-align:center" %)
605 -[[image:V-NET_Client_KOR0AHEA4M.png]]
606 -
607 -
608 -)))
609 -
610 610  == **Ethernet DF1 Protocol** ==
611 611  
612 612  [[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Allen-Bradley%20Ethernet%20DF1.zip]]
... ... @@ -665,142 +665,6 @@
665 665  **✎Note: **As the wiring diagram indicated, this protocol requires the DB9 serial port pin 4. But pin 4 is undefined for all V-Box, so it need the user to solder a Pull-up resistor to make the pin 4 working. As for how to solder the resistor on the motherboard, please contact with Wecon technical support for the details.
666 666  {{/info}}
667 667  
668 -= Create communication with EMERSON PLC =
669 -
670 -= **RTU Slave Protocol** =
671 -
672 -Supported series: EC10 series
673 -
674 -**1）V-BOX setting**
675 -
676 -|**Items**|**Settings**|**Note**
677 -|Protocol|Emerson 984 RTU Slave MODBUS|
678 -|Connection|RS485|
679 -|Baud rate|19200|
680 -|Data bit|8|
681 -|Parity|EVEN|
682 -|Stop bit|1|
683 -|Device station No.|1|Need to be same as the PLC setting
684 -
685 -(% class="wikigeneratedid" %)
686 -**2）PLC Setting**
687 -
688 -(% class="wikigeneratedid" %)
689 -Remember to use the Control Star to enable the Modbus RTU communication for port 1 in system block before dowload into PLC.
690 -
691 -(% style="text-align:center" %)
692 -[[image:ControlStarSystemBlock.png]]
693 -
694 -(% style="text-align:center" %)
695 -[[image:ControlStarCommunicate.png]]
696 -
697 -(% style="text-align:center" %)
698 -[[image:ControlStarModbus.png]]
699 -
700 -(% class="wikigeneratedid" %)
701 -**3）Address List**
702 -
703 -|**Type**|**Device registers**|**Format**|**Range**|**Note**
704 -|(% colspan="1" rowspan="12" %)Bit|Y|YOOO|0~~377|
705 -|X|XOOO|0~~377|
706 -|M0|M0DDDD|0~~2047|
707 -|M1|M1DDDDD|2048~~10239|
708 -|SM0|SM0DDD|0~~255|
709 -|SM1|SM1DDD|256~~511|
710 -|S0|S0DDDD|0~~1023|
711 -|S1|S1DDDD|1024~~4095|
712 -|T0|T0DDD|0~~255|
713 -|T1|T1DDD|256~~511|
714 -|C0|C0DDD|0~~255|
715 -|C1|C1DDD|256~~306|
716 -|(% colspan="1" rowspan="7" %)Word|D|DDDDD|0~~7999|
717 -|Z|ZDD|0~~15|
718 -|TW0|TW0DDD|0~~255|
719 -|TW1|TW1DDD|256~~511|
720 -|SD0|SD0DDD|0~~255|
721 -|SD1|SD1DDD|256~~511|
722 -|CW|CWDDD|0~~306|
723 -|(% colspan="1" rowspan="2" %)Double Word|CW0|CW0DDD|200~~255|
724 -|CW1|CW1DDDDD|256~~99999|
725 -
726 -**4) Cable Wiring**
727 -
728 -(% style="text-align:center" %)
729 -[[image:Emerson.png]]
730 -
731 -= Create communication with HollySys PLC =
732 -
733 -== **LK Modbus RTU** ==
734 -
735 -Supported Series: HollySys LK series PLC
736 -
737 -**1）V-BOX setting**
738 -
739 -|**Items**|**Settings**|**Note**
740 -|Protocol|HollySys LK Modbus RTU|
741 -|Connection|RS485|
742 -|Baud rate|38400|
743 -|Data bit|8|
744 -|Parity|None|
745 -|Stop bit|1|
746 -|Device station No.|1|
747 -
748 -**2）Address List**
749 -
750 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
751 -|Bit|QX|QXDDDDD.dd|0~~65535.15|
752 -|Bit|IX|IXDDDDD.dd|0~~65535.15|
753 -|Bit|MX|MXDDDDD.dd|0~~65535.15|
754 -|Word|QW|QWDDDDD|0~~99999|
755 -|Word|IW|IWDDDDD|0~~99999|
756 -|Word|MW|MWDDDDD|0~~99999|
757 -|Word|MD|MDDDDDD|0~~99999|
758 -
759 -**3）Cable Wiring**
760 -
761 -(% style="text-align:center" %)
762 -[[image:Hollysys485-2.png]]
763 -
764 -== **LM Modbus RTU** ==
765 -
766 -(% class="wikigeneratedid" %)
767 -Supported Series: HollySys LM3109/LM3107 PLC
768 -
769 -(% class="wikigeneratedid" %)
770 -**1）V-BOX setting**
771 -
772 -|(% style="width:208px" %)**Items**|(% style="width:310px" %)**Settings**|(% style="width:365px" %)**Optional**|(% style="width:152px" %)**Note**
773 -|(% style="width:208px" %)Protocol|(% style="width:310px" %)HollySys LM Modbus RTU|(% style="width:365px" %)HollySys LM Modbus RTU|(% style="width:152px" %)
774 -|(% style="width:208px" %)Connection|(% style="width:310px" %)RS232|(% style="width:365px" %)RS485|(% style="width:152px" %)
775 -|(% style="width:208px" %)Baud rate|(% style="width:310px" %)38400|(% style="width:365px" %)38400|(% style="width:152px" %)
776 -|(% style="width:208px" %)Data bit|(% style="width:310px" %)8|(% style="width:365px" %)8|(% style="width:152px" %)
777 -|(% style="width:208px" %)Parity|(% style="width:310px" %)None|(% style="width:365px" %)None|(% style="width:152px" %)
778 -|(% style="width:208px" %)Stop bit|(% style="width:310px" %)1|(% style="width:365px" %)1|(% style="width:152px" %)
779 -|(% style="width:208px" %)Device station No.|(% style="width:310px" %)1|(% style="width:365px" %)1|(% style="width:152px" %)
780 -
781 -**2）Address List**
782 -
783 -|=**Type**|=**Device registers**|=**Format**|=**Range**|=**Note**
784 -|Bit|QX|QXDDDDD.o|0~~99999.7|
785 -|Bit|IX|IXDDDDD.o|0~~99999.7|
786 -|Bit|MX|MXDDDDD.o|0~~99999.7|
787 -|Word|QW|QWDDDDD|0~~99999|
788 -|Word|IW|IWDDDDD|0~~99999|
789 -|Word|MW|MWDDDDD|0~~99999|
790 -|Word|MD|MDDDDDD|0~~99999|
791 -
792 -**Cable Wiring**
793 -
794 -RS232
795 -
796 -(% style="text-align:center" %)
797 -[[image:HollySysRS232.png]]
798 -
799 -RS485
800 -
801 -(% style="text-align:center" %)
802 -[[image:Hollysys LM Modbus RTU.gif]]
803 -
804 804  = Create communication with **Siemens PLC** =
805 805  
806 806  == **S7-200 Smart Ethernet Protocol** ==
... ... @@ -2278,7 +2278,7 @@
2278 2278  **✎Note: **We usually use the Data Type 4 for read the Modbus registers(Function Code 03)
2279 2279  {{/info}}
2280 2280  
2281 -For example, here we want to read the Phase Voltage Ua (Modbus offset 0006), the Modbus register main No. requires input decimal number, and check whether the actual address has one address offset, so the tag configured like the following screenshot:
2057 +For example, here we want to read the Phase Voltage Ua (Modbus offset 0006), Mod, so the tag configured like the following screenshot:
2282 2282  
2283 2283  (% style="text-align:center" %)
2284 2284  [[image:VNETModbusTagSettings.png]]
... ... @@ -2300,6 +2300,8 @@
2300 2300  (% style="text-align:center" %)
2301 2301  [[image:Monitoringtaggreenlight.png]]
2302 2302  
2079 +
2080 +
2303 2303  == **MODBUS RTU Master** ==
2304 2304  
2305 2305  Select the protocol "Modbus RTU Master",
1682233464031-639.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -15.9 KB
Content
CCW.Shell_E5Cwj4tUL3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -27.1 KB
Content
ControlStarCommunicate.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -26.0 KB
Content
ControlStarModbus.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -24.9 KB
Content
ControlStarSystemBlock.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
Emerson.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -13.7 KB
Content
Ethernet.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -45.5 KB
Content
HollySysRS232.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -10.4 KB
Content
Hollysys LM Modbus RTU.gif
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -7.1 KB
Content
Hollysys485-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -13.5 KB
Content
Hollysys485box.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -13.4 KB
Content
V-NET_Client setting.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -41.9 KB
Content
V-NET_Client_ADD.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -51.4 KB
Content
V-NET_Client_KOR0AHEA4M.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -14.2 KB
Content
V-NET_Client_TIiAymnjkx.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -12.8 KB
Content
V-NET_Client_TNBuqy7T5r.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -26.7 KB
Content
V-NET_Client_communication.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -25.5 KB
Content
V-NET_Client_iKKKhcgxm1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -35.9 KB
Content
V-NET_Client_t2Rg2wpSoY.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -53.7 KB
Content
conne ab plc.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -43.1 KB
Content
export.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -115.2 KB
Content
export1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -115.2 KB
Content
project create.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -65.5 KB
Content
software.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -25.8 KB
Content
v-net client vers.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.AiXia
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content