Wiki source code of 1 Communication

Version 103.1 by Ben on 2022/08/25 09:46

version	line-number	content
52.1	1	= (% style="color:inherit; font-family:inherit" %)WECON PLC(%%) =
1.1	2
63.1	3	== LX3V Serial Protocol ==
31.1	4
20.1	5	Supported series: WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM
1.1	6
81.1	7	1）PLC Settings
1.1	8
20.1	9	\|Item\|Settings\|Note
	10	\|Protocol\|WECON LX2V/ LX2E/ LX3V/LX3VP/LX3VE/LX3VM\|
	11	\|Connection\|RS422/RS485\|
	12	\|Baud rate\|9600\|
	13	\|Data bit\|7\|
	14	\|Parity\|EVEN\|
	15	\|Stop bit\|1\|
	16	\|PLC station No.\|1\|
1.1	17
82.1	18	2）PLC Address List
20.1	19
	20	\|Type\|Device registers\|HMI registers\|Format\|Range\|Note
	21	\|(% rowspan="6" %)Bit\|X\|X\|Xo\|0~~303237\|
	22	\|Y\|Y\|Y o\|0~~303237\|
	23	\|M\|M\|M d\|0~~99999\|
	24	\|T\|T\|T d\|0~~99999\|
	25	\|C\|C\|C d\|0~~99999\|
	26	\|S\|S\|S d\|0~~99999\|
	27	\|(% rowspan="8" %)Word\|X\|X\|Xo\|0~~303237\|
	28	\|Y\|Y\|Y o\|0~~303237\|
	29	\|M\|M\|M d\|0~~99999\|
	30	\|T\|T\|T d\|0~~99999\|
	31	\|C\|C\|C d\|0~~199\|
	32	\|D\|D\|D d\|0~~7999\|
	33	\|S\|S\|S d\|0~~99999\|
	34	\|SD\|SD\|SD d\|8000~~9999\|
	35
83.1	36	3）Configure the communication protocol
20.1	37
80.1	38	[[image:image-20220824152217-1.png]]
	39
83.1	40	4）hardware connection
80.1	41
20.1	42	* RS422
	43
69.1	44	[[image:image-20220824120614-5.png]]
20.1	45
68.1	46	* RS485
	47
69.1	48	[[image:image-20220824120524-3.png]]
68.1	49
63.1	50	== LX5V Serial Protocol ==
28.1	51
84.1	52	This example introduces the establishment of serial port communication between V-BOX and LX5V. It is introduced through three parts: PLC software configuration, V-BOX software configuration, and hardware wiring.
20.1	53
	54	Software configuration of PLC
	55
	56	1）PLC programming software
	57
71.1	58	[[image:image-20220824142722-1.png]]
20.1	59
	60	2）New PLC project
	61
	62	Click New Project and select the PLC model.
	63
33.1	64	[[image:image-20220822172623-2.png]]
20.1	65
	66	3）Set Serial port parameters
	67
	68	Follow the steps below to configure Serial port parameters
	69
	70	Baud rate：115200
	71
	72	Data bit：8
	73
	74	Stop bit：1
	75
	76	Parity：No verification
	77
33.1	78	[[image:image-20220822172657-3.png]]
20.1	79
	80	4）Registers list
	81
33.1	82	[[image:image-20220822172730-4.png]]
20.1	83
33.1	84	V-BOX software configuration
28.1	85
35.1	86	1）V-BOX programming software
20.1	87
35.1	88	[[image:image-20220824104124-1.png]]
20.1	89
35.1	90	2）V-NET add device
20.1	91
35.1	92	Open V-NET client software → add device. As shown in the figure below, click "+" in the order of steps, and the Add Device window will pop up, enter the access key, password and remark, to add the device.
20.1	93
35.1	94	[[image:image-20220824104909-2.png]]
20.1	95
	96	3）Set communication port parameters
	97
	98	Click the communication configuration button on the left to find the communication protocol with LX5V. After selecting the protocol, configure the communication parameters of the COM port.
	99
	100	Baud rate：115200
	101
	102	Data bit：8
	103
	104	Stop bit：1
	105
	106	Parity：No verification
	107
70.1	108	[[image:image-20220824142130-1.png]]
20.1	109
	110	hardware connection
	111
	112	1）Hardware wiring diagram
	113
70.1	114	[[image:image-20220824142546-2.png]]
28.1	115
70.1	116	[[image:image-20220824142643-3.png]]
28.1	117
74.1	118	The above are all the steps for establishing serial port communication between V-BOX with LX5V PLC.
20.1	119
63.1	120	== LX5V-N Ethernet protocol ==
20.1	121
77.1	122	This example introduces the establishment of Ethernet communication between V-BOX and LX5V-N. It is introduced through three parts: PLC software configuration, V-BOX software configuration, and hardware wiring.
20.1	123
	124	Software configuration of PLC
	125
	126	1）PLC programming software
	127
72.1	128	[[image:image-20220824142722-1.png]]
20.1	129
	130	2）New PLC project
	131
	132	Click New Project and select the PLC model.
	133
73.1	134	[[image:image-20220824143613-1.png]]
20.1	135
	136	3）Set Ethernet port parameters
	137
	138	Follow the steps below to configure Ethernet parameters
	139
	140	PLC IP address：192.168.39.200
	141
	142	default gateway：192.168.39.1
	143
	144	subnet mask：255.255.255.0
	145
73.1	146	[[image:image-20220824143744-2.png]]
20.1	147
	148	4）Registers list
	149
74.1	150	[[image:image-20220822172730-4.png]]
20.1	151
74.1	152	(% id="cke_bm_22473S" style="display:none" %) (%%)V-BOX software configuration
20.1	153
74.1	154	1）V-BOX programming software
20.1	155
74.1	156	[[image:image-20220824104124-1.png]]
20.1	157
74.1	158	2）V-NET add device
20.1	159
74.1	160	Open V-NET client software → add device. As shown in the figure below, click "+" in the order of steps, and the Add Device window will pop up, enter the access key, password and remark, to add the device.
20.1	161
74.1	162	[[image:image-20220824104909-2.png]]
20.1	163
79.1	164	3）Set communication Protocol
20.1	165
74.1	166	Click Communication to configure the LX5V plc protocol and IP address.
20.1	167
74.1	168	[[image:image-20220824144619-1.png]]
20.1	169
	170	hardware connection
	171
	172	1）Hardware wiring diagram
	173
74.1	174	[[image:image-20220824151127-2.png]]
20.1	175
74.1	176	The above are all the steps for establishing ethernet communication between V-BOX with LX5V PLC.
20.1	177
23.1	178	= Rockwell PLC =
22.1	179
63.1	180	== (% id="cke_bm_5621S" style="display:none" %) (%%)MicroLogix Protocol ==
37.1	181
	182	MicroLogix 1000/1100/1200/1400/1500; SLC 5/03 5/04 5/05 PLC-5
	183
87.1	184	1）PLC Settings
37.1	185
	186	\|Item\|Settings\|Note
85.1	187	\|Protocol\|Allen-Bradlley DF1 Advanced\|
37.1	188	\|Connection\|RS232\|
	189	\|Baud rate\|19200\|
	190	\|Data bit\|8\|
	191	\|Parity\|None\|
	192	\|Stop bit\|1\|
	193	\|PLC station No.\|1\|
	194
87.1	195	2）Address List
37.1	196
	197	\|Type\|Device registers\|Format\|Range\|Note
	198	\|(% rowspan="5" %)Bit\|I\|I d.d\|0.0~~255.15\|
	199	\|O\|O d.d\|0.0~~255.15\|
	200	\|B\|B nnhh.dd\|0.0~~ffff.15\|nn: block number (hex)
	201	\|S\|S d.d\|0.0~~255.15\|
	202	\|N\|N nnhh.dd\|0.0~~ffff.15\|nn: block number (hex)
	203	\|(% rowspan="9" %)Word\|S\|S d\|0~~255\|
	204	\|TS\|TS nnhh\|0~~ffff\|(% rowspan="8" %)nn: block number (hex)
	205	\|TP\|TP nnhh\|0~~ffff
	206	\|CS\|CS nnhh\|0~~ffff
	207	\|CP\|CP nnhh\|0~~ffff
	208	\|N\|N nnhh\|0~~ffff
	209	\|C\|C nnhh\|0~~ffff
	210	\|T\|T nnhh\|0~~ffff
	211	\|R\|R nnhh\|0~~ffff
	212
86.1	213	3）Configure the communication protocol[[image:image-20220824152928-1.png]]
85.1	214
87.1	215	4）Configure the communication protocol
37.1	216
	217	[[image:image-20220824110724-1.png]]
	218
63.1	219	== CompactLogix Protocol ==
37.1	220
11.1	221	(((
16.1	222	(((
38.1	223	This example introduces the establishment of Ethernet communication between Wecon V-box and CompactLogix L1769. It is introduced through three parts: PLC software configuration, V-box software configuration, and hardware wiring.
16.1	224	)))
11.1	225	)))
	226
	227	(((
15.1	228	(% class="wikigeneratedid" id="HSoftwareconfigurationofPLC" %)
	229	(((
	230	Software configuration of PLC
11.1	231	)))
	232
15.1	233	(% class="wikigeneratedid" id="HPLCprogrammingsoftware" %)
11.1	234	(((
15.1	235	1）PLC programming software
	236	)))
11.1	237
17.1	238	[[image:image-20220714162600-1.png]]
11.1	239
15.1	240	(% class="wikigeneratedid" id="HNewPLCproject" %)
11.1	241	(((
15.1	242	2）New PLC project
11.1	243	)))
	244
	245	(((
16.1	246	(((
15.1	247	Click New Project and select the PLC model.
11.1	248	)))
16.1	249	)))
11.1	250
	251	(((
17.1	252	[[image:image-20220714162617-2.png]]
11.1	253	)))
	254
	255	(((
17.1	256
16.1	257
17.1	258	[[image:image-20220714162652-4.png]]
11.1	259	)))
	260
	261	(((
15.1	262	(% class="wikigeneratedid" id="HSetEthernetparameters" %)
	263	(((
	264	3）Set Ethernet parameters
	265	)))
11.1	266
	267	(((
15.1	268	(((
16.1	269	(((
11.1	270	Follow the steps below to configure Ethernet parameters
	271	)))
15.1	272	)))
16.1	273	)))
11.1	274
	275	(((
15.1	276	(((
16.1	277	(((
11.1	278	PLC IP address：192.168.40.101
	279	)))
15.1	280	)))
16.1	281	)))
11.1	282
	283	(((
15.1	284	(((
16.1	285	(((
11.1	286	default gateway：192.168.40.1
	287	)))
15.1	288	)))
16.1	289	)))
11.1	290
	291	(((
15.1	292	(((
16.1	293	(((
11.1	294	subnet mask：255.255.255.0
	295	)))
15.1	296	)))
16.1	297	)))
11.1	298
	299	(((
17.1	300	[[image:image-20220714162713-5.png]]
11.1	301	)))
	302
	303	(((
	304
	305	)))
	306
	307	(((
15.1	308	(% class="wikigeneratedid" id="HV-boxsoftwareconfiguration" %)
	309	(((
	310	V-box software configuration
	311	)))
11.1	312
15.1	313	(% class="wikigeneratedid" id="HV-boxprogrammingsoftware" %)
	314	(((
	315	1）V-box programming software
	316	)))
11.1	317
15.1	318	(% class="wikigeneratedid" %)
	319	(((
17.1	320	[[image:image-20220714162725-6.png]]
15.1	321	)))
11.1	322
15.1	323	(% class="wikigeneratedid" id="HConfiguredevicenetwork" %)
	324	(((
	325	2）Configure device network
	326	)))
11.1	327
	328	(((
15.1	329	(((
16.1	330	(((
11.1	331	Click the Configuration Download button[[image:image-20220714115308-8.png\|\|height="22" width="15"]], It is used to configure the device network, update the device time, obtain the device machine code, check the device network, etc.
	332	)))
16.1	333
	334	(((
	335	In the example below, the IP address of V-Box is configured as 192.168.40.66, and the networking method is 4G connection
15.1	336	)))
16.1	337	)))
	338	)))
11.1	339
	340	(((
15.1	341	(((
17.1	342	[[image:image-20220714162737-7.png]]
16.1	343
	344
11.1	345	)))
	346	)))
	347	)))
	348	)))
	349
15.1	350	(% class="wikigeneratedid" id="HV-netadddevice" %)
11.1	351	(((
15.1	352	3）V-net add device
11.1	353	)))
15.1	354	)))
11.1	355
	356	(((
16.1	357	(((
21.1	358	Open VNET client software → add device. As shown in the figure below, click "+" in the order of steps, and the Add Device window will pop up, enter the device machine code/product code, device password, and device alias to add the device. [[image:image-20220714162752-8.png]]
11.1	359	)))
	360
	361
	362	)))
	363
	364	(((
15.1	365	(% class="wikigeneratedid" id="HSetcommunicationportparameters" %)
	366	(((
	367	4）Set communication port parameters
	368	)))
11.1	369
16.1	370	(((
	371	In the device list on the left, find the Vbox that communicates with the L1769, click it and select configuration,communication port configuration in the main interface to add a communication protocol.
11.1	372	)))
	373
17.1	374	[[image:image-20220714162805-9.png]]
16.1	375	)))
	376
	377	(((
11.1	378	The communication port is selected as Ethernet, the device type is selected as Allen-Bradley, the protocol is Allen-BradleyMicro850_FreeTag EthemetIP, and the IP is the internal IP address of the L1769 PLC. The port number is 44818.
16.1	379	)))
11.1	380
97.1	381	[[image:image-20220824164346-1.png]]
11.1	382
	383
16.1	384	(((
22.1	385	After adding the protocol Allen-BradleyMicro850_FreeTag, click[[image:image-20220714143838-2.png]]icon add label.[[image:image-20220714162827-11.png]]
16.1	386	)))
14.1	387
16.1	388	(% class="wikigeneratedid" id="HEngineeringproduction" %)
	389	(((
	390	5）Engineering production
	391	)))
14.1	392
16.1	393	(% class="wikigeneratedid" %)
	394	(((
	395	(((
	396	According to your own needs, use the V-NET client software to edit the required data monitoring points.
	397	)))
14.1	398
17.1	399	[[image:image-20220714162841-12.png]]
14.1	400
16.1	401
	402	(((
	403	hardware connection
	404	)))
	405	)))
	406
	407	(((
	408	1）Hardware wiring diagram
	409	)))
	410
	411	(((
	412	(((
	413	This example introduces Wecon V-box with Allen-Bradley L1769 PLC to establish communication through Ethernet. The connection diagram is as follows:
	414	)))
	415
17.1	416	[[image:image-20220714162856-13.png]]
16.1	417
	418	(((
41.1	419	The above are all the steps for establishing Ethernet communication between Wecon V-box with CompactLogix L1769 PLC.
26.1	420
	421
	422	== Allen-Bradley Ethernet DF1 ==
	423
	424	[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Allen-Bradley%20Ethernet%20DF1.zip]]
	425
	426
	427	= Siemens PLC =
61.1	428
63.1	429	== S7-200 Smart Ethernet Protocol ==
61.1	430
	431	[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20S7-200%20Smart.zip]]
88.1	432
	433
99.1	434	== S7-300 Ethernet Protocol ==
88.1	435
	436	Supported Series: Siemens S7-300 series PLC
	437
90.1	438	1）PLC Setting
88.1	439
	440	\|Items\|Settings\|Note
	441	\|Protocol\|Simens S7-300 Ethernet\|
	442	\|Connection\|Ethernet\|
	443	\|Port No.\|102\|
	444	\|PLC station No.\|2\|Need to be same as the PLC setting
	445
90.1	446	2）Address List
88.1	447
	448	\|Type\|Device register\|HMI register\|Format\|Range\|Note
	449	\|(% rowspan="4" %)Bit\|I\|I\|I ddddd.o\|0.0~~99999.7\|
	450	\|Q\|Q\|Q ddddd.o\|0.0~~99999.7\|
	451	\|M\|M\|M ddddd.o\|0.0~~99999.7\|
	452	\|DB0.DB~~DB99.DB\|DBxDBD\|DBxDB nndddd.o\|0.0~~99999999.7\|(((
	453	nn: block number;
	454
	455	dddd: address;
16.1	456	)))
88.1	457	\|(% rowspan="8" %)Word\|I\|IW\|IW ddddd\|0~~99999\|
	458	\|Q\|QW\|QW ddddd\|0~~99999\|
	459	\|(% rowspan="3" %)M\|MB\|MB ddddd\|0~~99999\|
	460	\|MW\|MW ddddd\|0~~99999\|(((
	461	MW0=MB(0~~1)
	462
	463	MW2=MB(2~~3)
	464
	465	Address value is a multiple of 2
16.1	466	)))
88.1	467	\|MD\|MD ddddd\|0~~99999\|(((
	468	MD0=MB(0~~3)
16.1	469
88.1	470	MD4=MB(4~~7)
	471
	472	Address value is a multiple of 4
	473	)))
	474	\|(% rowspan="3" %)DB0.DB~~DB99.DB\|DBxDBB\|DBxDBB nndddd\|0~~99999999\|(% rowspan="3" %)(((
	475	nn: block number;
	476
	477	dddd: address
	478	)))
	479	\|DBxDBW\|DBxDBW nndddd\|0~~99999999
	480	\|DBxDBD\|DBxDBD nndddd\|0~~99999999
	481
90.1	482	3）Configure the communication protocol
88.1	483
90.1	484	[[image:image-20220824161345-1.png]]
88.1	485
96.1	486	4）Cable Wiring
88.1	487
90.1	488	[[image:image-20220824161450-2.png]]
88.1	489	)))
	490	)))
	491
63.1	492	== S7-1200 Ethernet Protocol ==
1.1	493
	494	[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20S7-1200%20via%20Ehernet.zip]]
	495
93.1	496	== S7-XXX Ethernet Protocol ==
91.1	497
	498	Supported Series: Siemens S7-400, S7-1200 and S7-1500
	499
95.1	500	1）PLC Setting
91.1	501
	502	\|=Items\|=Settings\|=Note
	503	\|Protocol\|Siemens S7-XXX\|
	504	\|Connection\|Ethernet\|
	505	\|Port No.\|102\|
	506	\|Device No.\|Slot (Default 1 for S7-1500/ 2 for S7-1200/ 3 for S7-400)\|
	507	\|HMI No.\|Rack (Default as 0)\|
	508
94.1	509	Slot from TIA Portal is equal to Device No. of V-net
91.1	510
94.1	511	Rack from TIA Portal is equal to HMI No. of V-net
91.1	512
92.1	513	[[image:image-20220824162459-3.png]]
91.1	514
94.1	515	[[image:image-20220824163305-2.png]]
	516
95.1	517	2）Address List
91.1	518
	519	\|Type\|Device register\|HMI register\|Format\|Range\|Note
	520	\|(% rowspan="4" %)Bit\|I\|I\|M d.o\|(((
	521	d:0~-~-9999
	522
	523	o:0-7
	524	)))\|
	525	\|Q\|Q\|Q d.o\|(((
	526	d:0~-~-9999
	527
	528	o:0-7
	529	)))\|
	530	\|M\|M\|M d.o\|(((
	531	d:0~-~-9999
	532
	533	o:0-7
	534	)))\|
	535	\|DB0.DB-DB99.DB\|DBxDB\|DBxDBnndddd.o\|(((
	536	nn:0-9999,
	537
	538	dddd:0-9999,
	539
	540	o:0-7
	541	)))\|(((
	542	nn:DB No.
	543
	544	dddd:address value
	545
	546	o: digit address
	547	)))
	548	\|(% rowspan="8" %)Word\|M\|MB\|MB d\|d:0-99999\|
	549	\|M\|MW\|MW d\|d:0-99999\|(((
	550	MW0=MB(0~~1)
	551
	552	MW2=MB(2~~3)
	553
	554	Address value is a multiple of 2
	555	)))
	556	\|M\|MD\|MD d\|d:0-99999\|(((
	557	MD0=MB(0~~3)
	558
	559	MD4=MB(4~~7)
	560
	561	Address value is a multiple of 4
	562	)))
	563	\|I\|IW\|IW d\|d:0-99999\|
	564	\|Q\|QW\|QW d\|d:0-99999\|
	565	\|DB0.DB-DB99.DB\|DBxDBB\|DBxDBBnndddd\|(((
	566	nn:0-9999
	567
	568	dddd:0-9999
	569	)))\|(((
	570	nn:DB No.
	571
	572	dddd:address value
	573	)))
	574	\|DB0.DB-DB99.DB\|DBxDBW\|DBxDBWnndddd\|(((
	575	nn:0-9999
	576
	577	dddd:0-9999
	578	)))\|(((
	579	nn:DB No.
	580
	581	dddd:address value
	582
	583	Address value is a multiple of 2
	584	)))
	585	\|DB0.DB-DB99.DB\|DBxDBD\|DBxDBDnndddd\|(((
	586	nn:0-9999
	587
	588	dddd:0-9999
	589	)))\|(((
	590	nn:DB No.
	591
	592	dddd:address value
	593
	594	Address value is a multiple of 4
	595	)))
	596
95.1	597	3）Configure the communication protocol
91.1	598
94.1	599	[[image:image-20220824163448-3.png]]
91.1	600
	601	✎Note:
	602
94.1	603	* The S7-1200 supports simultaneous connection of three devices, so the driver supports simultaneous access to PLC by three V-BOX.
	604	* V-BOX access PLC, use S7 protocol, access PLC TSAP 02.01 (s7-1200 PROFINET interface only supports three connections, the default support), detailed reference to the system manual of S7-1200.
91.1	605
95.1	606	4）Cable Wiring
91.1	607
92.1	608	[[image:image-20220824162342-2.png]]
91.1	609
98.1	610
56.1	611	= Mitsubishi PLC =
	612
103.1	613	== FX2N Serial Protocol ==
	614
	615
	616
102.1	617	== FX3U Serial Protocol ==
56.1	618
	619
103.1	620	== FX5U Serial Protocol ==
	621
	622
100.1	623	== FX5U Ethernet Protocol ==
	624
	625	Mitsubishi FX5U series PLC
	626
	627	HMI Settings
	628
	629	\|Items\|Settings\|Note
	630	\|Protocol\|Mitsubishi FX5U\|
	631	\|Connection\|Ethernet\|
	632	\|Port No.\|5002\|Must be the same as the PLC setting
	633	\|PLC station No.\|0\|
	634
	635	Address List
	636
	637	\|Type\|Device registers\|HMI registers\|Format\|Range\|Note
	638	\|(% rowspan="15" %)Bit\|X\|X\|X o\|0~~303237\|
	639	\|Y\|Y\|Y o\|0~~303237\|
	640	\|M\|M\|M d\|0~~99999\|
	641	\|B\|B\|B h\|0~~7FFF\|
	642	\|F\|F\|F d\|0~~32767\|
	643	\|SB\|SB\|SB h\|0~~7FFF\|
	644	\|TS\|TS\|TS d\|0~~1023\|
	645	\|TC\|TC\|TC d\|0~~1023\|
	646	\|STS\|STS\|STS d\|0~~1023\|
	647	\|STC\|STC\|STS d\|0~~1023\|
	648	\|CS\|CS\|CS d\|0~~1023\|
	649	\|CC\|CC\|CC d\|0~~1023\|
	650	\|SM\|SM\|SM d\|0~~9999\|
	651	\|L\|L\|L d\|0~~32767\|
	652	\|S\|S\|S d\|0~~4095\|
	653	\|(% rowspan="9" %)Word\|W\|W\|W h\|0~~3FF\|
	654	\|TN\|TN\|TN d\|0~~1023\|
	655	\|STN\|STN\|STN d\|0~~1023\|
	656	\|CN\|CN\|CN d\|0~~1023\|
	657	\|R\|R\|R d\|0~~32767\|
	658	\|SW\|SW\|SW h\|0~~7FFF\|
	659	\|Z\|Z\|Z d\|0~~23\|
	660	\|D\|D\|D d\|0~~7999\|
	661	\|SD\|SD\|SD d\|0~~11999\|
	662
	663	PLC Settings (GX Works 3)
	664
	665	Find the [Ethernet port] in the navigation area.
	666
	667	(% style="text-align:center" %)
	668	[[image:12.PLC Protocol_html_8e8f85ace087346c.png\|\|data-xwiki-image-style-alignment="center" height="593" width="300" class="img-thumbnail"]]
	669
	670	Select [Own Node Settings] in the [Setting Item List];
	671
	672	Set [IP Address], [Subnet Mask], [Default Gateway];
	673
	674	Click [Detailed Settings] into [Ethernet Configuration (Built-in Ethernet Port)] windows;
	675
	676	(% style="text-align:center" %)
	677	[[image:12.PLC Protocol_html_5d98495052c8c10e.png\|\|data-xwiki-image-style-alignment="center" height="339" width="600" class="img-thumbnail"]]
	678
	679	Select [SLMP Connection Module] and add into host station as below picture shows;
	680
	681	Set Port number as 5002 (this is necessary settings);
	682
	683	Click [Close with Reflecting the Setting] to save and close window;
	684
	685	(% style="text-align:center" %)
	686	[[image:12.PLC Protocol_html_14b489fdc6c6589d.png\|\|data-xwiki-image-style-alignment="center" height="350" width="600" class="img-thumbnail"]]
	687
	688	Click [Apply] to completed Etherenet settings;
	689
	690	Switch to the [On line data operation] interface as below, check the item and click [Execute] to download.
	691
	692	(% style="text-align:center" %)
	693	[[image:12.PLC Protocol_html_c93025a968a8a9e7.png\|\|data-xwiki-image-style-alignment="center" height="434" width="600" class="img-thumbnail"]]
	694
	695	Cable Wiring
	696
	697	(% style="text-align:center" %)
	698	[[image:12.PLC Protocol_html_2297240b57346b2a.png\|\|data-xwiki-image-style-alignment="center" height="170" width="401" class="img-thumbnail"]]
	699
26.1	700	= Delta PLC =
	701
64.1	702	== DVP Ethernet Protocol ==
1.1	703
	704	[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
	705
63.1	706	== DVP Serial Protocol ==
1.1	707
	708	[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Delta%20DVP%20Ethernet.zip]]
	709
48.1	710	= Omron PLC =
	711
65.1	712	== CP1 Series Protocol ==
7.1	713
8.1	714	[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CP1%20Series.zip]]
7.1	715
65.1	716	== CJ2M Series Protocol ==
7.1	717
8.1	718	[[download link>>https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communication%20with%20ORMON%20CJ2M.zip]]
7.1	719
50.1	720	= Modbus RTU =
	721
53.1	722	== V-BOX as master ==
50.1	723
	724	Select the protocol “(% class="mark" %)Modbus RTU Slave(All Fuction)”,
	725
	726	(% class="mark" %)then set BaudRate,Port,Stop Bit,Data Bit,Parity
	727
	728	(% style="text-align:center" %)
	729	[[image:1624342015914-382.png\|\|height="486" width="800" class="img-thumbnail"]]
	730
53.1	731	== V-BOX as slave ==
50.1	732
	733	Select the protocol “(% class="mark" %)Modbus RTU Master”,
	734
	735	(% class="mark" %)then set BaudRate,Port,Stop Bit,Data Bit,Parity
	736
	737	(% style="text-align:center" %)
	738	[[image:1624348709622-711.png\|\|queryString="width=809&height=493" height="488" width="800" class="img-thumbnail"]]
	739
	740	Address List
	741
	742	(% class="table-bordered" %)
	743	\|Type\|Register\|Function code & Description
	744	\|(% rowspan="11" %)Word\|(% rowspan="3" %)3\|04 (read input register: read current binary value in one or more input registers)
	745	\|06 (write single register: write a binary value to a holding register)
	746	\|10 (write values to multiple addresses )
	747	\|(% rowspan="3" %)4\|03 (read holding register: read current binary value in one or more holding registers)
	748	\|06 (write single register: write a binary value to a holding register)
	749	\|10 (write values to multiple addresses )
	750	\|(% rowspan="3" %)W6\|03 (read holding register: read current binary value in one or more holding registers)
	751	\|06 (write single register: write a binary value to a holding register)
	752	\|10 (write values to multiple addresses )
	753	\|(% rowspan="2" %)W16\|03 (read holding register: read current binary value in one or more holding registers)
	754	\|10 (write values to multiple addresses )
	755	\|(% rowspan="11" %)Bit\|(% rowspan="3" %)0\|01 (Read coil state)
	756	\|05 (Force a single coil to force the on/off state of a logic coil)
	757	\|0F (Write multiple bits, ie write continuously)
	758	\|(% rowspan="3" %)1\|02 (Read the input state)
	759	\|05 (Force a single coil to force the on/off state of a logic coil)
	760	\|0F (Write multiple bits)
	761	\|(% rowspan="3" %)W5\|01 (Read coil state to obtain the current state of a set of logic coils)
	762	\|05 (Force a single coil to force the on/off state of a logic coil)
	763	\|0F (Write multiple bits)
	764	\|(% rowspan="2" %)W15\|01 (Read coil state to obtain the current state of a set of logic coils)
	765	\|0F (Write multiple bits)
	766
55.1	767	== communicate with VB inverter ==
52.1	768
	769	[[download link>>url:https://ftp.we-con.com.cn/Download/WIKI/V-BOX/Demo/%E9%80%9A%E8%AE%AF%E6%A1%88%E4%BE%8B/Communicate%20with%20VB%20inverter.zip]]
	770
51.1	771	= User define protocol =
1.1	772
19.1	773	More serial port script instruction,please refer manual:[[Lua script function>>doc:V-BOX.V-Net.Manual.04 Lua Script.01 Lua Functions.WebHome]]~-~-->[[3.Serial port operation>>url:http://docs.we-con.com.cn/wiki/vbox/view/HMI/04.Lua%20script%20%20function%20and%20operation/01.Lua%20script%20function/#H3.Serialportoperation]]
1.1	774
10.1	775	== Read the temperature sensor. ==
1.1	776
	777	the commond format is as beliow:
	778
	779	Send commond:01 03 02 00 00 03 04 73
	780
	781	Feedback commond:01 03 06 07 F7 0E 7E B7 35
	782
	783	Temperature data:07 F7,desimal = 2039,it means temperature is 20.39℃.
	784
	785	Humidity data:0E 7E,desimal = 3710, it mean humidity is 37.10%RH.
	786
	787	Script Demo:
	788
	789	~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--
	790
	791	function com.main()
	792	~-~-dosomething
	793	openPlc()
	794	end
	795	function openPlc()
	796	if obj then
	797	~-~- If the serial port opened,then read/write data by timing
	798
	799	local wri = string.pack(">HHHH",0X0103,0X0200,0X0003,0X0473)
	800	local arr = reading(wri)
	801	~-~- if arr ~~=nil then
	802	~-~- if arr[1] ==33 and arr[2] ==v[2][2] and arr[3] ==v[2][3] then
	803	~-~- local A = arr[4]*256
	804	~-~- local B = A+arr[5]
	805	~-~- addr_setword(v[1],B)
	806	~-~- end
	807	~-~- end
	808
	809	else
	810	~-~-judge if there is a serial object, then initialize and open the serial port
	811	local configs = {
	812	name = 'COM1', ~-~-Select serial port COM1
	813	mode = 485, ~-~-Communication mode RS485
	814	baud_rate = 9600, ~-~-Baud rate 9600
	815	stop_bit = 1, ~-~-stop bit 1
	816	data_len = 8, ~-~-data length 8
	817	check_bit = 'NONE', ~-~-no parity
	818
	819	}
	820	obj,err = serial.open(configs) ~-~-Open serial port
	821	if not obj then
	822	print("serial open :failed", err) ~-~- Open serial port failed
	823	end
	824	end
	825	end
	826
	827	function reading(wri)
	828	obj:flush() ~-~- Clear serial port
	829	obj:write(wri) ~-~- Write serial port
	830	print(string.byte(wri,1,#wri))
	831	obj:flush() ~-~- Clear serial port
	832	local readed =obj:read(9,1000) ~-~- Read 9 bytes, timeout 1 second
	833	if readed and readed ~~= "" then
	834	~-~- judge that a non-empty string is read
	835	print(string.byte(readed,1,#readed))
	836	a={string.byte(readed, 1, #readed)}
	837	if nil ~~= a[4] and nil ~~= a[5] and nil ~~= a[6] and nil ~~= a[7] then
	838	a1=a[4]*256+a[5]
	839	a2=a[6]*256+a[7]
	840	addr_setword("@HDW0",a1)
	841	addr_setword("@HDW1",a2)
	842	end
	843	return {string.byte(readed, 1, #readed)}
	844	elseif readed == nil then
	845	print("serial read err:", err or "")
	846	return nil
	847	end
	848	return nil
	849	end
	850
	851	~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-

Wiki source code of 1 Communication

Navigation

Table of Contents