Skip to Content

Changes for page 2 Script

Last modified by Devin Chen on 2025/06/06 14:03
From version 11.1
edited by Jim(Forgotten)
on 2022/07/09 17:01
Change comment: There is no comment for this version
To version 37.1
edited by Hunter
on 2023/01/03 09:36
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Jim
1 +XWiki.Hunter
Content
... ... @@ -13,7 +13,7 @@
13 13  for example. addr_setshort(addr,num) Function: Write 16-bit signed decimal address
14 14  addr_getshort(addr) Function:Read 16-bit signed decimal address
15 15  addr_getword(string addr)Function: Read 16-bit unsigned decimal address
16 -More script function are in the second section of [[“V-BOX Script Interface Manual”>>doc:V-BOX.V-Net.1\.User Manual.04 Lua Script.01 Lua Functions.WebHome]]
16 +More script function are in the second section of [[“V-BOX Script Interface Manual”>>doc:V-BOX.V-Net.Manual.04 Lua Script.01 Lua Functions.WebHome]]
17 17  
18 18  == **1.2 Arithmetic** ==
19 19  
... ... @@ -70,6 +70,12 @@
70 70  
71 71  This example shows how to use the Bot API to send message into Telegram group or channel. When monitoring bit "@HDX" changes, it will trigger and send the message. Please replace with your own Token and chat id.
72 72  
73 +As for How to get the botToken and chatID, please check the followig videos:
74 +
75 +[[https:~~/~~/www.youtube.com/watch?v=zh6yYlnjX7k>>https://www.youtube.com/watch?v=zh6yYlnjX7k]]
76 +
77 +[[https:~~/~~/www.youtube.com/watch?v=Pj8mwuMZZvg>>https://www.youtube.com/watch?v=Pj8mwuMZZvg]]
78 +
73 73  {{code language="Lua"}}
74 74  local tempBit = 0
75 75  local tempWord = 0
... ... @@ -135,7 +135,312 @@
135 135  end
136 136  {{/code}}
137 137  
144 +== **1.6 LINE Notify** ==
138 138  
146 +This example shows how to use the LINE Notify to send message into LINE group. When monitoring bit "@test" changes, it will trigger and send the message. Please replace with your own Token.
147 +
148 +{{code}}
149 +local tempBit = 0
150 +local tempWord = 0
151 +
152 +local LineToken = "08XCpubkOdwGdGgRTXF0x8umiyrALtoM0v6lBFUV6PC"
153 +
154 +local https = require("https")
155 +local json = require("json")
156 +local ltn12 = require("ltn12")
157 +
158 +-- Send http.get request and return response result
159 +function getHttpsUrl(url,header,reqbody)
160 + local body = {}
161 + local bodyJson = json.encode(body)
162 + local result_table, code, headers, status = https.request{
163 + method = "POST",
164 + url = url,
165 + source = ltn12.source.string(reqbody),
166 + headers = header,
167 + sink = ltn12.sink.table(body)
168 + }
169 + print("code:"..code)
170 + if code~= 200 then
171 + return
172 + else
173 + return body
174 + end
175 +end
176 +
177 +function getMessageUrl(lineMessage)
178 + local url = "https://notify-api.line.me/api/notify"
179 + local reqMess = "message="..lineMessage
180 + local headers =
181 + {
182 + ["Authorization"] = "Bearer "..LineToken,
183 + ["Content-Type"] = "application/x-www-form-urlencoded",
184 + ["Content-Length"] = #reqMess
185 + }
186 +
187 + print("Get the link:"..url)
188 + getHttpsUrl(url, headers, reqMess)
189 +end
190 +
191 +
192 +function linenotify.main()
193 + local bitValue = addr_getbit("@test");
194 + local message = ''
195 + print("b=="..bitValue)
196 + if bitValue == 1 and bitValue ~= tempBit then
197 + message = 'Alarm V-Box triggered, the output is '.. bitValue
198 + getMessageUrl(message)
199 + print("Notification pushed of triggering alarm,"..bitValue)
200 + elseif bitValue == 0 and bitValue ~= tempBit then
201 + message = 'Alarm V-Box dismissed, the output is '.. bitValue
202 + getMessageUrl(message)
203 + print("Notification pushed of dismissing alarm,"..bitValue)
204 + end
205 + tempBit = bitValue----Prevent monitoring values from continuous being sent to the platform
206 +
207 + local wordValue = addr_getword("@t2")
208 + print("w=="..wordValue)
209 + --dosomething
210 + if wordValue >= 100 and wordValue ~= tempWord and tempWord <= 100 then
211 + message = 'Alarm V-Box triggered, the temperature is '.. wordValue
212 + getMessageUrl(message)
213 + print("Notification pushed of triggering alarm,"..wordValue)
214 + elseif wordValue < 100 and wordValue ~= tempWord and tempWord >= 100 then
215 + message = 'Alarm V-Box dismissed, the temperature is '.. wordValue
216 + getMessageUrl(message)
217 + print("Notification pushed of dismissing alarm,"..wordValue)
218 + end
219 + tempWord = wordValue----Prevent monitoring values from continuous being sent to the platform
220 +end
221 +{{/code}}
222 +
223 +== **1.7 Twilio WhatsApp Messaging** ==
224 +
225 +This example shows how to use the Twilio API to send WhatsApp message to private number. When monitoring bit "@testBit" changes, it will trigger and send the message. Please replace with your own SID, Token, twilioPhoneNumber and receiverPhoneNumber.
226 +
227 +About how to register the Twilio API, please check the following video:
228 +
229 +[[https:~~/~~/www.youtube.com/watch?v=Id4lKichauU>>https://www.youtube.com/watch?v=Id4lKichauU]]
230 +
231 +{{code language="Lua"}}
232 +local tempBit = 0
233 +local tempWord = 0
234 +
235 +local https = require("https")
236 +local json = require("json")
237 +local ltn12 = require("ltn12")
238 +
239 +local SID = 'AC1703bd710ffa98006d2bcc0b********'
240 +local Token = 'd3c11897623c39e538b20263ec19****'
241 +
242 +local twilioPhoneNumber = '+14155238886'
243 +local receiverPhoneNumber = '+8615880018277'
244 +
245 +local b='ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/'
246 +function encodingBase64(data)
247 + return ((data:gsub('.', function(x)
248 + local r,b='',x:byte()
249 + for i=8,1,-1 do r=r..(b%2^i-b%2^(i-1)>0 and '1' or '0') end
250 + return r;
251 + end)..'0000'):gsub('%d%d%d?%d?%d?%d?', function(x)
252 + if (#x < 6) then return '' end
253 + local c=0
254 + for i=1,6 do c=c+(x:sub(i,i)=='1' and 2^(6-i) or 0) end
255 + return b:sub(c+1,c+1)
256 + end)..({ '', '==', '=' })[#data%3+1])
257 +end
258 +
259 +function encodeUrl(str)
260 + str = string.gsub(str, "([^%w%.%- ])", function(c)
261 + return string.format("%%%02X", string.byte(c)) end)
262 + return string.gsub(str, " ", "+")
263 +end
264 +
265 +
266 +
267 +
268 +function requestBodySplice(message, sender, receiver)
269 + local reqBody = ''
270 + local encodeMess = encodeUrl(message)
271 + local encodeSend = encodeUrl(sender)
272 + local encodeRece = encodeUrl(receiver)
273 + --reqBody = "Body=Hello%20Wecon2&From=whatsapp%3A%2B14155238886&To=whatsapp%3A%2B8615880018277"
274 + reqBody = string.format("Body=%s&From=whatsapp:%s&To=whatsapp:%s", encodeMess, encodeSend, encodeRece)
275 + print(reqBody)
276 + return reqBody
277 +end
278 +
279 +
280 +-- Send http.get request and return response result
281 +function getHttpsUrl(url,header,reqbody)
282 + local body = {}
283 + local bodyJson = json.encode(body)
284 + local result_table, code, headers, status = https.request{
285 + method = "POST",
286 + url = url,
287 + source = ltn12.source.string(reqbody),
288 + headers = header,
289 + sink = ltn12.sink.table(body)
290 + }
291 + print("code:"..code)
292 + if code~= 200 then
293 + return
294 + else
295 + return body
296 + end
297 +end
298 +
299 +function getMessageUrl(whatsAppMessage)
300 + local auth = SID..':'..Token
301 + local url = "https://api.twilio.com/2010-04-01/Accounts/"..SID.."/Messages"
302 + --local reqMess = "message="..twilioMessage
303 + local reqMess = requestBodySplice(whatsAppMessage, twilioPhoneNumber, receiverPhoneNumber)
304 + local headers =
305 + {
306 + ["Authorization"] = "Basic "..encodingBase64(auth),
307 + ["Content-Type"] = "application/x-www-form-urlencoded",
308 + ["Content-Length"] = #reqMess
309 + }
310 +
311 + print("Get the link:"..url)
312 + getHttpsUrl(url, headers, reqMess)
313 +end
314 +
315 +
316 +
317 +function Twilio.main()
318 + --dosomething
319 + --local auth = SID..':'..Token
320 + --print(requestBodySplice("HelloWorld", twilioPhoneNumber, receiverPhoneNumber))
321 + --print(encodingBase64(auth))
322 + local bitValue = addr_getbit("@testBit");
323 + local message = ''
324 + print("b=="..bitValue)
325 + if bitValue == 1 and bitValue ~= tempBit then
326 + message = 'Alarm V-Box triggered, the output is '.. bitValue
327 + getMessageUrl(message)
328 + print("Notification pushed of triggering alarm,"..bitValue)
329 + elseif bitValue == 0 and bitValue ~= tempBit then
330 + message = 'Alarm V-Box dismissed, the output is '.. bitValue
331 + getMessageUrl(message)
332 + print("Notification pushed of dismissing alarm,"..bitValue)
333 + end
334 + tempBit = bitValue----Prevent monitoring values from continuous being sent to the platform
335 +
336 + local wordValue = addr_getword("@testWord")
337 + print("w=="..wordValue)
338 + --dosomething
339 + if wordValue >= 100 and wordValue ~= tempWord and tempWord <= 100 then
340 + message = 'Alarm V-Box triggered, the temperature is '.. wordValue
341 + getMessageUrl(message)
342 + print("Notification pushed of triggering alarm,"..wordValue)
343 + elseif wordValue < 100 and wordValue ~= tempWord and tempWord >= 100 then
344 + message = 'Alarm V-Box dismissed, the temperature is '.. wordValue
345 + getMessageUrl(message)
346 + print("Notification pushed of dismissing alarm,"..wordValue)
347 + end
348 + tempWord = wordValue----Prevent monitoring values from continuous being sent to the platform
349 +end
350 +{{/code}}
351 +
352 +== **1.8 How to parse value from HTTP response body** ==
353 +
354 +This example use [[https:~~/~~/www.weatherapi.com/>>https://www.weatherapi.com/]] as example, to show how to parse value from HTTP response body. When we input the city name into address "@HDW5050":
355 +
356 +(% style="text-align:center" %)
357 +[[image:InputHTTPparameter.png]]
358 +
359 +Then the response body would be like as following:
360 +
361 +{{code language="json"}}
362 +{
363 + "location": {
364 + "name": "Madrid",
365 + "region": "Madrid",
366 + "country": "Spain",
367 + "lat": 40.4,
368 + "lon": -3.68,
369 + "tz_id": "Europe/Madrid",
370 + "localtime_epoch": 1669022636,
371 + "localtime": "2022-11-21 10:23"
372 + },
373 + "current": {
374 + "last_updated_epoch": 1669022100,
375 + "last_updated": "2022-11-21 10:15",
376 + "temp_c": 13.0,
377 + "temp_f": 55.4,
378 + "is_day": 1,
379 + "condition": {
380 + "text": "Partly cloudy",
381 + "icon": "//cdn.weatherapi.com/weather/64x64/day/116.png",
382 + "code": 1003
383 + },
384 + "wind_mph": 11.9,
385 + "wind_kph": 19.1,
386 + "wind_degree": 210,
387 + "wind_dir": "SSW",
388 + "pressure_mb": 1015.0,
389 + "pressure_in": 29.97,
390 + "precip_mm": 0.0,
391 + "precip_in": 0.0,
392 + "humidity": 88,
393 + "cloud": 75,
394 + "feelslike_c": 10.8,
395 + "feelslike_f": 51.4,
396 + "vis_km": 10.0,
397 + "vis_miles": 6.0,
398 + "uv": 3.0,
399 + "gust_mph": 22.1,
400 + "gust_kph": 35.6
401 + }
402 +}
403 +{{/code}}
404 +
405 +(% class="wikigeneratedid" %)
406 +So we decode json into lua object to assign the value into addresses HDW6060(temperature), HDW7070(humidity), the code example like follows:
407 +
408 +{{code language="lua"}}
409 +local APIkey = '70faaecf926b4341b1974006221711'
410 +
411 +
412 +local http = require("socket.http")
413 +local json = require("json")
414 +
415 +-- Send http.get request and return response result
416 +function getHttpsUrl(url)
417 + local result_table, code, headers, status = http.request(url)
418 + print("code:"..code)
419 + if code~= 200 then
420 + return
421 + else
422 + return result_table
423 + end
424 +end
425 +
426 +function sendAPI(key, city)
427 + local url = "http://api.weatherapi.com/v1/current.json?key="..key.."&q="..city.."&aqi=no"
428 + --local url = 'http://v-box.net'
429 + --local url = 'https://www.google.com/'
430 + --http://api.weatherapi.com/v1/current.json?key=70faaecf926b4341b1974006221711&q=Barcelona&aqi=no
431 + print("Get the link:"..url)
432 + local body = getHttpsUrl(url)
433 + --print(body)
434 + local jsonBody = json.decode(body)
435 + --print(jsonBody["current"]["temp_c"])
436 + --print(type(jsonBody["current"]["temp_c"]))
437 + --print(type(jsonBody["current"]["humidity"]))
438 + addr_setfloat("@HDW6060", jsonBody["current"]["temp_c"])
439 + addr_setword("@HDW7070", jsonBody["current"]["humidity"])
440 +end
441 +
442 +
443 +function Weather.main()
444 + local cityName = addr_getstring("@HDW5050",6)
445 + print("cityName: "..cityName)
446 + sendAPI(APIkey, cityName)
447 +end
448 +{{/code}}
449 +
139 139  = **2 V-Box connect with third part server** =
140 140  
141 141  V-Box have two mode.One is for V-Net,User need to use WECON server to store data.We call this V-NET platform.
... ... @@ -154,152 +154,272 @@
154 154  
155 155  (% class="mark" %)2.If your server requires SSL certificate to log in,please use OpenCloud.Because only OpenCloud platform can support to upload certificate
156 156  
157 -== **2.1 V-Box connect with customer server:grouprobotinfo.com** ==
468 +(% class="wikigeneratedid" %)
469 +**✎Note: **Before program the script of MQTT, please make sure the server(MQTT broker) can be connected through MQTT Client tool.
158 158  
471 +(% class="wikigeneratedid" %)
472 +Tool link: **[[MQTT.fx>>http://mqttfx.jensd.de/index.php/download]]**
473 +
474 +== **2.1 V-Box connect with test server(General Example)** ==
475 +
476 +{{code language="lua"}}
477 +--MQTT configuration table
478 +local MQTT_CFG={}
479 +MQTT_CFG.username = "weconsupport"
480 +MQTT_CFG.password = "123456"
481 +MQTT_CFG.netway = 0
482 +MQTT_CFG.keepalive = 60
483 +MQTT_CFG.cleansession = 1
484 +--TCP URL
485 +MQTT_URL = "tcp://mq.tongxinmao.com:1883"
486 +--Client ID
487 +MQTT_CLIENT_ID = "V-BOXH-AG"
488 +
489 +--Generate UUID
490 +function uuid()
491 + local seed = {'e','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'}
492 + local tb = {}
493 + for i=1, 32 do
494 + table.insert(tb, seed[math.random(1,16)])
495 + end
496 + local sid=table.concat(tb)
497 + return string.format('%s',
498 + string.sub(sid,1,32)
499 + )
500 +end
501 +
502 +
503 +--Topic name to subscribed
504 +local SUBSCRIBE_TOPIC = 'testtopic/test/no1/123456'
505 +
506 +--Topic name to be published
507 +local PUBLISH_TOPIC = 'testtopic/test/no1/7890'
508 +
509 +
510 +--real time
511 +local LAST_TIME = 0
512 +
513 +
514 +--initialize mqtt
515 +function mqtt_init()
516 + print(string.format("mqtt init mqtt_url:%s mqtt_clientid:%s", MQTT_URL, MQTT_CLIENT_ID))
517 + g_mq, err = mqtt.create(MQTT_URL, MQTT_CLIENT_ID) -- create mqtt object,and declare it as a global variable
518 + if g_mq then
519 + g_mq:on("message", mqtt_msg_callback) -- Register a callback for receiving messages
520 + print("mqtt init success")
521 + else
522 + print("mqtt init failed:", err)
523 + end
524 +end
525 +
526 +-- connect to mqtt
527 +function mqtt_connect()
528 + print("mqtt connecting...")
529 + local stat, err = g_mq:connect(MQTT_CFG)
530 + if stat == nil then
531 + print("mqtt connect failed:", err)
532 + return
533 + else
534 + print("mqtt connected")
535 + end
536 + g_mq:subscribe(SUBSCRIBE_TOPIC, 0)
537 +end
538 +
539 +-- Received message callback function
540 +function mqtt_msg_callback(topic, msg)
541 + print("topic:", topic)
542 + print("msg:", msg)
543 + local objMsg = json.decode(msg)
544 + local water = objMsg.data.waterlevel
545 + local temp = objMsg.data.temperature
546 + addr_setword("@HDW20",water)
547 + addr_setword("@HDW10",temp)
548 +end
549 +
550 +--Send data (data upload to platform and encapsulate it with custom functions)
551 +function send_data()
552 + local pub_data = {
553 + timestamp = os.time(),
554 + messageId = 1,
555 + event = 'test_data',
556 + mfrs = 'V-Box',
557 + data = {
558 + id = uuid(),
559 + waterlevel = addr_getword("@HDW10"),
560 + temperature = addr_getword("@HDW20")
561 + }
562 + }
563 + return g_mq:publish(PUBLISH_TOPIC, json.encode(pub_data), 0, 0)
564 +end
565 +
566 +
567 +--main function fixed timed execution
568 +function MQTT.main()
569 + --dosomething
570 + print(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " main start")
571 + --determine the mqtt object whether exist
572 + if g_mq then
573 + --determine the mqtt object whether has been connected or not
574 + if g_mq:isconnected() then
575 + send_data()
576 + else
577 + --if exceed 20 sec not connect, reconnect once
578 + if os.time() - LAST_TIME > 20 then
579 + LAST_TIME = os.time()
580 + --connect to mqtt or reconnect
581 + mqtt_connect()
582 + end
583 + end
584 + else
585 + --mqtt object does not exist so create new one
586 + mqtt_init()
587 + end
588 + print(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " main end")
589 +end
590 +{{/code}}
591 +
592 +== **2.2 V-Box connect with customer server:grouprobotinfo.com** ==
593 +
159 159  This demo does not use SSL certification. Script is as below
160 160  
161 161  Demo1:
162 162  
163 -(% class="box infomessage" %)
164 -(((
165 -~-~- Meta class
166 -~-~-main
598 +{{code language="lua"}}
599 +-- Meta class
600 +--main
167 167  function mq.main()
168 168   if not mq.m then
169 169   local err = ""
170 -\\ mq.m, err = mqtt.create("tcp:~/~/grouprobotinfo.com:1883", "ClienID") ~-~- create connection
604 +
605 + mq.m, err = mqtt.create("tcp://grouprobotinfo.com:1883", "ClienID") -- create connection
171 171   if mq.m then
172 172   mq.config = {
173 - username = "",~-~- ID
174 - password = "",~-~- password
175 - netway = 1, ~-~- Ethernet connection, WIFI=1
176 - ~-~- keepalive = 100, ~-~- Optional, set the connection heartbeat interval for 100 seconds.
177 - ~-~- cleansession = 0, ~-~- Optional, keep session
608 + username = "",-- ID
609 + password = "",-- password
610 + netway = 1, -- Ethernet connection, WIFI=1
611 + -- keepalive = 100, -- Optional, set the connection heartbeat interval for 100 seconds.
612 + -- cleansession = 0, -- Optional, keep session
178 178   }
179 - mq.m:on("message", function(topic, msg) ~-~- Register for receiving message callbacks
614 + mq.m:on("message", function(topic, msg) -- Register for receiving message callbacks
180 180   local str = string.format("%s:%s", topic, msg)
181 - ~-~- print("mqtt msg:", str) ~-~- Print out the received topics and content
182 - end
183 - )
184 - mq.m:on("offline", function (cause) ~-~- Register for lost connection callbacks
185 - ~-~- addr_setstring("@xxx", "cause"..(cause or " got nil"))
616 + -- print("mqtt msg:", str) -- Print out the received topics and content
186 186   end)
187 - mq.m:on("arrived", function() ~-~- Registration for sending messages to callbacks 
618 + mq.m:on("offline", function (cause) -- Register for lost connection callbacks
619 + -- addr_setstring("@xxx", "cause"..(cause or " got nil"))
620 + end)
621 + mq.m:on("arrived", function() -- Registration for sending messages to callbacks
188 188   print("msg arrived")
189 189   end)
190 190   else
191 - print("mqtt create failed:", err) ~-~- Create object failed
625 + print("mqtt create failed:", err) -- Create object failed
192 192   end
193 193   else
194 - if mq.m:isconnected() then ~-~- If online, post a message
628 + if mq.m:isconnected() then -- If online, post a message
195 195   local phaseStatus ="unknow"
196 196   if addr_getbit("@Standby")== 1 then
197 - phaseStatus = "Standby"
631 + phaseStatus = "Standby"
198 198   elseif addr_getbit("@Pre-Freeze")==1 then
199 - phaseStatus= "Pre-Freeze"
633 + phaseStatus= "Pre-Freeze"
200 200   elseif addr_getbit("@Prepare")==1 then
201 - phaseStatus ="Prepare"
635 + phaseStatus ="Prepare"
202 202   elseif addr_getbit("@Primary Dry")==1 then
203 - phaseStatus = "Primary dry"
637 + phaseStatus = "Primary dry"
204 204   elseif addr_getbit("@Secondary Dry")==1 then
205 - phaseStatus = "Secondary Dry"
639 + phaseStatus = "Secondary Dry"
206 206   end
207 -~-~- print(addr_getbit("@Primary Dry"))
208 -~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--
641 + --print(addr_getbit("@Primary Dry"))
642 +-------------------------------------------------------------------------------------------------------------------------
209 209   local activating ="unknow"
210 210   if addr_getbit("@Compressor")==1 then
211 - activating = ",".."Compressor"
645 + activating = ",".."Compressor"
212 212   end
213 213   if addr_getbit("@Silicone Pump")==1 then
214 - activating = activating..",".."Silicone Pump"
648 + activating = activating..",".."Silicone Pump"
215 215   end
216 216   if addr_getbit("@Vacuum Pump")==1 then
217 - activating = activating..",".."Vacuum Pump"
651 + activating = activating..",".."Vacuum Pump"
218 218   end
219 219   if addr_getbit("@Root Pump")==1 then
220 - activating = activating..",".."Root Pump"
654 + activating = activating..",".."Root Pump"
221 221   end
222 222   if addr_getbit("@Heater")==1 then
223 - activating = activating..",".."Heater"
657 + activating = activating..",".."Heater"
224 224   end
225 225   if addr_getbit("@Valve Silicone")==1 then
226 - activating = activating..",".."Valve Silicone"
660 + activating = activating..",".."Valve Silicone"
227 227   end
228 228   if addr_getbit("@Valve Ice Condenser")==1 then
229 - activating = activating..",".."Valve Ice Condenser"
663 + activating = activating..",".."Valve Ice Condenser"
230 230   end
231 231   if addr_getbit("@Valve Vacuum Pump")==1 then
232 - activating = activating..",".."Valve Vacuum Pump"
666 + activating = activating..",".."Valve Vacuum Pump"
233 233   end
234 234   local pr_activating =string.sub(activating,2)
235 - ~-~- print(pr_activating) 
236 -
237 -
669 + -- print(pr_activating)
238 238   local status_text ="unknow"
239 239   if addr_getbit("@Status Run")==1 then
240 - status_text = "RUNNING"
672 + status_text = "RUNNING"
241 241   else
242 - status_text = "STOP"
674 + status_text = "STOP"
243 243   end
244 -~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--
245 -\\ local js = {type="status",
246 - mc_name ="FD300",
247 - status=status_text,
248 - elapsed_time={
249 - hour=addr_getword("@Elapsed Time (Hour)"),
250 - min=addr_getword("@Elapsed Time (Minute)"),
251 - sec=addr_getword("@Elapsed Time (Second)")
252 - },
253 - phase = phaseStatus,
254 - step = addr_getword("@Step"),
255 - activating_output = pr_activating,
256 - sv=addr_getshort("@SV Silicone")/10,
257 - pv=addr_getshort("@PV Silicone")/10,
258 - product1=addr_getshort("@Product 1")/10,
259 -
260 - product2=addr_getshort("@Product 2")/10,
261 - product3=addr_getshort("@Product 3")/10,
262 - product4=addr_getshort("@Product 4")/10,
263 - ice1=addr_getshort("@Ice condenser 1")/10,
264 - ice2=addr_getshort("@Ice condenser 2")/10,
265 - vacuum=addr_getfloat("@Vacuum")
266 -
267 - }
676 +-------------------------------------------------------------------------------------------------------------------------
677 + local js = {type="status",
678 + mc_name ="FD300",
679 + status=status_text,
680 + elapsed_time={
681 + hour=addr_getword("@Elapsed Time (Hour)"),
682 + min=addr_getword("@Elapsed Time (Minute)"),
683 + sec=addr_getword("@Elapsed Time (Second)")
684 + },
685 + phase = phaseStatus,
686 + step = addr_getword("@Step"),
687 + activating_output = pr_activating,
688 + sv=addr_getshort("@SV Silicone")/10,
689 + pv=addr_getshort("@PV Silicone")/10,
690 + product1=addr_getshort("@Product 1")/10,
691 +
692 + product2=addr_getshort("@Product 2")/10,
693 + product3=addr_getshort("@Product 3")/10,
694 + product4=addr_getshort("@Product 4")/10,
695 + ice1=addr_getshort("@Ice condenser 1")/10,
696 + ice2=addr_getshort("@Ice condenser 2")/10,
697 + vacuum=addr_getfloat("@Vacuum")
698 + }
268 268   local jsAlarm = { HPC = addr_getbit("@B_25395#W0.00"),
269 - ODPC = addr_getbit("@B_25395#W0.01"),
270 - MTPC=addr_getbit("@B_25395#W0.02"),
271 - HTT = addr_getbit("@B_25395#W1.03"),
272 - CPC = addr_getbit("@B_25395#W0.08"),
273 - CPSP =addr_getbit("@B_25395#W1.00"),
274 - CPVP =addr_getbit("@B_25395#W0.10"),
275 - CPRP =addr_getbit("@B_25395#W0.11"),
276 - HP =addr_getbit("@B_25395#W1.01"),
277 - PP= addr_getbit("@B_25395#W1.02"),
278 - PO=addr_getbit("@B_25395#W0.07"),
279 - FSE=addr_getbit("@B_25395#W2.04"),
280 - AVVSVV=addr_getbit("@B_25395#W1.12"),
281 - ICHT=addr_getbit("@B_25395#W3.06")
282 -
283 - }
284 -\\ ~-~- ("@B_25395#CIO1.02")
700 + ODPC = addr_getbit("@B_25395#W0.01"),
701 + MTPC=addr_getbit("@B_25395#W0.02"),
702 + HTT = addr_getbit("@B_25395#W1.03"),
703 + CPC = addr_getbit("@B_25395#W0.08"),
704 + CPSP =addr_getbit("@B_25395#W1.00"),
705 + CPVP =addr_getbit("@B_25395#W0.10"),
706 + CPRP =addr_getbit("@B_25395#W0.11"),
707 + HP =addr_getbit("@B_25395#W1.01"),
708 + PP= addr_getbit("@B_25395#W1.02"),
709 + PO=addr_getbit("@B_25395#W0.07"),
710 + FSE=addr_getbit("@B_25395#W2.04"),
711 + AVVSVV=addr_getbit("@B_25395#W1.12"),
712 + ICHT=addr_getbit("@B_25395#W3.06")
713 + }
714 + -- ("@B_25395#CIO1.02")
285 285   mq.m:publish("mqtt-v-box-epsilon-fd300", json.encode(js) , 0, 0)
286 286   mq.m:publish("mqtt-v-box-epsilon-alarm-fd300", json.encode(jsAlarm) , 0, 0)
287 287   else
288 - local stat, err = mq.m:connect(mq.config) ~-~- connection
289 - if stat == nil then ~-~-Determine whether to connect
718 + local stat, err = mq.m:connect(mq.config) -- connection
719 + if stat == nil then --Determine whether to connect
290 290   print("mqtt connect failed:", err)
291 - return ~-~- Connection failed, return directly
721 + return -- Connection failed, return directly
292 292   end
293 - mq.m:subscribe("mqtt-v-box-epsilon", 0)~-~- Subscribe to topics
294 -\\ end
295 - ~-~- mq.m:unsubscribe("stc/test")
296 - ~-~- mq.m:disconnect() ~-~- close matt
297 - ~-~- mq.m:close() ~-~- close clase
723 + mq.m:subscribe("mqtt-v-box-epsilon", 0)-- Subscribe to topics
724 +
725 + end
726 + -- mq.m:unsubscribe("stc/test")
727 + -- mq.m:disconnect() -- close matt
728 + -- mq.m:close() -- close clase
298 298   end
299 299  end
300 -)))
731 +{{/code}}
301 301  
302 -== **2.2 V-Box connect with Azure platform** ==
733 +== **2.3 V-Box connect with Azure platform** ==
303 303  
304 304  In this demo,V-Box connects with Azure by SSL certification.
305 305  
... ... @@ -430,7 +430,7 @@
430 430  end
431 431  )))
432 432  
433 -== **2.3 How to configure the Huawei platform?（✎Note: Huawei IOT DA function is only in China area.If you want this function,you need to use chinese mobile to register）** ==
864 +== **2.4 How to configure the Huawei platform?（✎Note: Huawei IOT DA function is only in China area.If you want this function,you need to use chinese mobile to register）** ==
434 434  
435 435  1.Register a account: [[https:~~/~~/www.huaweicloud.com/intl/en-us/s/JUlPVERNJQ>>https://www.huaweicloud.com/intl/en-us/s/JUlPVERNJQ]]
436 436  
... ... @@ -579,7 +579,7 @@
579 579  (% style="text-align:center" %)
580 580  [[image:1624441186851-536.png||height="434" width="700" class="img-thumbnail"]]
581 581  
582 -== **2.4 V-Box connect with Huawei platform** ==
1013 +== **2.5 V-Box connect with Huawei platform** ==
583 583  
584 584  In this demo,V-Box connects with Huawei by SSL certification.
585 585  
... ... @@ -700,7 +700,7 @@
700 700  (% style="text-align:center" %)
701 701  [[image:1624506666650-161.png||height="547" width="1000" class="img-thumbnail"]]
702 702  
703 -== **2.5 V-Box connect with AWS platform** ==
1134 +== **2.6 V-Box connect with AWS platform** ==
704 704  
705 705  === **Log in AWS** ===
706 706  
... ... @@ -723,342 +723,271 @@
723 723  
724 724  [[image:image-20220709165402-4.png]]
725 725  
726 -{{code language="LUA"}}
1157 +{{code language="java"}}
727 727  {
728 -
729 729    "Version": "2012-10-17",
730 -
731 731    "Statement": [
732 -
733 733      {
734 -
735 735        "Effect": "Allow",
736 -
737 737        "Action": [
738 -
739 739          "iot:Connect",
740 -
741 741          "iot:Publish",
742 -
743 743          "iot:Subscribe",
744 -
745 745          "iot:Receive",
746 -
747 747          "greengrass:Discover"
748 -
749 749        ],
750 -
751 751        "Resource": "*"
752 -
753 753      }
754 -
755 755    ]
756 -
757 757  }
758 758  {{/code}}
759 759  
760 -1. **Create things**
1176 +=== **Create things** ===
761 761  
762 762  Click “Manage”~-~-->“Things”~-~-->“Create things”~-~-->“Create single thing”
763 763  
1180 +[[image:image-20220709165402-6.png]]
764 764  
765 -|
766 -| |[[image:image-20220709165402-6.png]]
1182 +[[image:image-20220709165402-7.png]]
767 767  
768 -
769 -|
770 -| |[[image:image-20220709165402-7.png]]
771 -
772 -|
773 -| |[[image:image-20220709165402-8.png]]
774 -
775 775  Name the thing~-~-->Click “Next”
776 776  
1186 +[[image:image-20220709165402-8.png]]
777 777  
778 778  Select the way to create certificate
779 779  
1190 +[[image:image-20220709165402-9.png]]
780 780  
781 -|
782 -| |[[image:image-20220709165402-9.png]]
783 -
784 784  Select policy
785 785  
1194 +[[image:image-20220709165402-10.png]]
786 786  
787 -|
788 -| |[[image:image-20220709165402-10.png]]
1196 +[[image:image-20220709165402-11.png]]
789 789  
790 790  
1199 +=== **Test with MQTT.fx tool** ===
791 791  
792 -
793 -
794 -
795 -
796 -
797 -
798 -
799 -|
800 -| |[[image:image-20220709165402-11.png]]
801 -
802 -
803 -
804 -
805 -
806 -
807 -
808 -1. **Test with MQTT.fx tool**
809 -
810 810  Click “View Setting” to get the “Broker Adress”
811 811  
1203 +[[image:image-20220709165402-13.png]]
812 812  
813 -|
814 -| |[[image:image-20220709165402-12.png]]
1205 +[[image:image-20220709165402-12.png]]
815 815  
816 -|
817 -| |[[image:image-20220709165402-13.png]]
818 -
819 -
820 -
821 -
822 -
823 -
824 -
825 -
826 -
827 -|
828 -| |[[image:image-20220709165402-14.png]]
829 -
830 830  Create one connection in MQTT.fx tool, set broker port as 8883.
831 831  
1209 +[[image:image-20220709165402-14.png]]
1210 +
832 832  Upload the CA File, Client Certificate File, Client Key File
833 833  
1213 +[[image:image-20220709165402-15.png]]
834 834  
835 -|
836 -| |[[image:image-20220709165402-15.png]]
837 -
838 -
839 -
840 840  Publish message to topic “TEST”
841 841  
1217 +[[image:image-20220709165402-17.png]]
842 842  
843 -|
844 -| |[[image:image-20220709165402-16.png]]
845 -
846 -|
847 -| |[[image:image-20220709165402-17.png]]
848 -
849 849  Click”Test”~-~-->”MQTT test client”~-~-->”Subscrible to a topic”, to get message publish from MQTT.fx tool.
850 850  
1221 +[[image:image-20220709173500-1.png]]
1222 +
851 851  And we can also send message form AWS platform to MQTT.fx tool.
852 852  
1225 +[[image:image-20220709165402-18.png]]
853 853  
854 -|
855 -| |[[image:image-20220709165402-18.png]]
1227 +=== **Configurate in CloudTool** ===
856 856  
857 -
858 -
859 -1. **Configurate in CloudTool**
860 -
861 861  Copy the same setting in MQTT.fx to MQTT configuration
862 862  
1231 +[[image:image-20220709165402-19.png]]
863 863  
864 -|
865 -| |[[image:image-20220709165402-19.png]]
866 -
867 867   Add a lua script and copy the lua demo into it.
868 868  
1235 +[[image:image-20220709165402-20.png]]
869 869  
870 -|
871 -| |[[image:image-20220709165402-20.png]]
1237 +{{info}}
1238 +**✎Note:** Before using the following demo script, please make sure the V-Box firmware is newer than 22110701
1239 +{{/info}}
872 872  
873 -
874 -
875 -
1241 +{{code language="lua"}}
876 876  sprint = print
877 877  
878 -~-~-Cloud mode interface to obtain the MQTT information configured by the cloud platform: (5 returns, namely the server address, client ID, connection table, last word table, certificate table)
1244 +--Cloud mode interface to obtain the MQTT information configured by the cloud platform: (5 returns, namely the server address, client ID, connection table, last word table, certificate table)
879 879  
880 880  local MQTT_URL, MQTT_CLIENTID, MQTT_CFG, MQTT_LWT, MQTT_CART = mqtt.setup_cfg()
881 881  
882 -~-~-publish to topics
1248 +--publish to topics
883 883  
884 884  local pub_RE_TOPIC = string.format('TEST')
885 885  
886 -~-~-Subscribe topics
1252 +--Subscribe topics
887 887  
888 888  local Subscribe_RE_TOPIC1 = string.format('TEST')
889 889  
890 -~-~-variable
1256 +--variable
891 891  
892 892  local last_time = 0
893 893  
894 -~-~-Timing main function
1260 +--Timing main function
895 895  
896 896  function aws.main()
897 897  
898 - sprint(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " aws.main start")
1264 + sprint(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " aws.main start")
899 899  
900 - if g_mq then
1266 + if g_mq then
901 901  
902 - if g_mq:isconnected() then
1268 + if g_mq:isconnected() then
903 903  
904 - send_Data()
1270 + send_Data()
905 905  
906 - else
1272 + else
907 907  
908 - if os.time() - last_time > 5 then
1274 + if os.time() - last_time > 5 then
909 909  
910 - last_time = os.time()
1276 + last_time = os.time()
911 911  
912 - mymqtt_connect()
1278 + mymqtt_connect()
913 913  
1280 + end
1281 +
914 914   end
915 915  
916 - end
1284 + else
917 917  
918 - else
1286 + mymqtt_init()
919 919  
920 - mymqtt_init()
1288 + end
921 921  
922 - end
1290 + sprint(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " aws.main end")
923 923  
924 - sprint(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " aws.main end")
925 -
926 926  end
927 927  
928 928  
929 -~-~- Initialize MQTT
930 930  
1296 +-- Initialize MQTT
1297 +
931 931  function mymqtt_init()
932 932  
933 - sprint(string.format("mqtt init mqtt_url:%s mqtt_clientid:%s", MQTT_URL, MQTT_CLIENTID))
1300 + sprint(string.format("mqtt init mqtt_url:%s mqtt_clientid:%s", MQTT_URL, MQTT_CLIENTID))
934 934  
935 - g_mq, err = mqtt.create(MQTT_URL, MQTT_CLIENTID) ~-~- Create the object and declare it as a global variable
1302 + g_mq, err = mqtt.create(MQTT_URL, MQTT_CLIENTID, 1) -- Create the object and declare it as a global variable, 1 means using the domain to connect
936 936  
937 - if g_mq then
1304 + if g_mq then
938 938  
939 - g_mq:on("message", mymqtt_msg_callback) ~-~- Register to receive message callbacks
1306 + g_mq:on("message", mymqtt_msg_callback) -- Register to receive message callbacks
940 940  
941 - sprint("mqtt init success")
1308 + sprint("mqtt init success")
942 942  
943 - else
1310 + else
944 944  
945 - sprint("mqtt init failed:", err)
1312 + sprint("mqtt init failed:", err)
946 946  
947 - end
1314 + end
948 948  
949 949  end
950 950  
951 -~-~- Connect to MQTT server
1318 +-- Connect to MQTT server
952 952  
953 953  function mymqtt_connect()
954 954  
955 - sprint("mqtt connecting...")
1322 + sprint("mqtt connecting...")
956 956  
957 - local stat, err = g_mq:connect(MQTT_CFG,MQTT_LWT, MQTT_CART)
1324 + local stat, err = g_mq:connect(MQTT_CFG,MQTT_LWT, MQTT_CART)
958 958  
959 - if stat == nil then
1326 + if stat == nil then
960 960  
961 - sprint("mqtt connect failed:", err)
1328 + sprint("mqtt connect failed:", err)
962 962  
963 - return
1330 + return
964 964  
965 - else
1332 + else
966 966  
967 - sprint("mqtt connected")
1334 + sprint("mqtt connected")
968 968  
969 - end
1336 + end
970 970  
971 - g_mq:subscribe(TEST, 0)
1338 + g_mq:subscribe(Subscribe_RE_TOPIC1, 0)
972 972  
973 973  end
974 974  
975 -~-~- Receive MQTT message callback function
1342 +-- Receive MQTT message callback function
976 976  
977 977  function mymqtt_msg_callback(topic, msg)
978 978  
979 - print("topic:",topic)
1346 + print("topic:",topic)
980 980  
981 - print("revdata:",msg)
1348 + print("revdata:",msg)
982 982  
983 - local revData = json.decode(msg)
1350 + local revData = json.decode(msg)
984 984  
985 - print (revData)
1352 + print (revData)
986 986  
987 - if topic == Subscribe_RE_TOPIC1 then ~-~-Process topic information subscribed from the cloud
1354 + if topic == Subscribe_RE_TOPIC1 then --Process topic information subscribed from the cloud
988 988  
989 -if string.match(topic,Subscribe_RE_TOPIC1) then
1356 + if string.match(topic,Subscribe_RE_TOPIC1) then
990 990  
991 - ~-~-if revData ~~= nil then
1358 + --if revData ~= nil then
992 992  
993 - for k,v in pairs (revData) do
1360 + for k,v in pairs (revData) do
994 994  
995 - print("printing revdata after kv here")
1362 + print("printing revdata after kv here")
996 996  
997 - print (k,v)
1364 + print (k,v)
998 998  
999 - end
1366 + end
1000 1000  
1001 - print ("current state is",fanstate)
1368 + print ("current state is",fanstate)
1002 1002  
1003 - ~-~-end
1370 + --end
1004 1004  
1005 -end
1372 + end
1006 1006  
1007 -end
1374 + end
1008 1008  
1009 1009  end
1010 1010  
1011 1011  
1012 -~-~-Get real-time data
1013 1013  
1380 +--Get real-time data
1381 +
1014 1014  function getData()
1015 1015  
1016 - local jdata = {}
1384 + local jdata = {}
1017 1017  
1018 - local addr = bns_get_alldata()
1386 + local addr = bns_get_alldata()
1019 1019  
1020 - print(json.encode(addr))
1388 + print(json.encode(addr))
1021 1021  
1022 - for i,v in pairs(addr) do
1390 + for i,v in pairs(addr) do
1023 1023  
1024 - if v[2] == 1 then
1392 + if v[2] == 1 then
1025 1025  
1026 - jdata[v[3]] = v[4]
1394 + jdata[v[3]] = v[4]
1027 1027  
1028 - end
1396 + end
1029 1029  
1030 - end
1398 + end
1031 1031  
1032 - return jdata
1400 + return jdata
1033 1033  
1034 1034  end
1035 1035  
1036 -~-~-send data
1404 +--send data
1037 1037  
1038 1038  function send_Data()
1039 1039  
1040 - local pub_data =
1408 + local pub_data =
1409 + {
1410 + 123
1411 + }
1041 1041  
1042 - {
1043 -
1044 -123
1045 -
1046 -}
1047 -
1048 1048  sprint(json.encode(pub_data))
1049 1049  
1050 1050  print("..........",pub_RE_TOPIC)
1051 1051  
1052 - return g_mq:publish(pub_RE_TOPIC, json.encode(pub_data), 0, 0)
1417 + return g_mq:publish(pub_RE_TOPIC, json.encode(pub_data), 0, 0)
1053 1053  
1054 1054  end
1420 +{{/code}}
1055 1055  
1056 -
1057 -
1058 1058  Get message in AWS
1059 1059  
1060 -
1061 -|
1062 -| |[[image:image-20220709165402-21.png]]
1063 -
1064 -
1424 +[[image:image-20220709165402-21.png]]
InputHTTPparameter.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +17.9 KB
Content
image-20220709173500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Jim
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 MB
Content