Skip to Content

Changes for page 2 Script

Last modified by Devin Chen on 2025/06/06 14:03
From version 12.1
edited by Jim(Forgotten)
on 2022/07/09 17:02
Change comment: There is no comment for this version
To version 39.1
edited by Hunter
on 2023/03/17 15:50
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Jim
1 +XWiki.Hunter
Content
... ... @@ -13,7 +13,7 @@
13 13  for example. addr_setshort(addr,num) Function: Write 16-bit signed decimal address
14 14  addr_getshort(addr) Function:Read 16-bit signed decimal address
15 15  addr_getword(string addr)Function: Read 16-bit unsigned decimal address
16 -More script function are in the second section of [[“V-BOX Script Interface Manual”>>doc:V-BOX.V-Net.1\.User Manual.04 Lua Script.01 Lua Functions.WebHome]]
16 +More script function are in the second section of [[“V-BOX Script Interface Manual”>>doc:V-BOX.V-Net.Manual.04 Lua Script.01 Lua Functions.WebHome]]
17 17  
18 18  == **1.2 Arithmetic** ==
19 19  
... ... @@ -70,6 +70,12 @@
70 70  
71 71  This example shows how to use the Bot API to send message into Telegram group or channel. When monitoring bit "@HDX" changes, it will trigger and send the message. Please replace with your own Token and chat id.
72 72  
73 +As for How to get the botToken and chatID, please check the followig videos:
74 +
75 +[[https:~~/~~/www.youtube.com/watch?v=zh6yYlnjX7k>>https://www.youtube.com/watch?v=zh6yYlnjX7k]]
76 +
77 +[[https:~~/~~/www.youtube.com/watch?v=Pj8mwuMZZvg>>https://www.youtube.com/watch?v=Pj8mwuMZZvg]]
78 +
73 73  {{code language="Lua"}}
74 74  local tempBit = 0
75 75  local tempWord = 0
... ... @@ -135,7 +135,312 @@
135 135  end
136 136  {{/code}}
137 137  
144 +== **1.6 LINE Notify** ==
138 138  
146 +This example shows how to use the LINE Notify to send message into LINE group. When monitoring bit "@test" changes, it will trigger and send the message. Please replace with your own Token.
147 +
148 +{{code}}
149 +local tempBit = 0
150 +local tempWord = 0
151 +
152 +local LineToken = "08XCpubkOdwGdGgRTXF0x8umiyrALtoM0v6lBFUV6PC"
153 +
154 +local https = require("https")
155 +local json = require("json")
156 +local ltn12 = require("ltn12")
157 +
158 +-- Send http.get request and return response result
159 +function getHttpsUrl(url,header,reqbody)
160 + local body = {}
161 + local bodyJson = json.encode(body)
162 + local result_table, code, headers, status = https.request{
163 + method = "POST",
164 + url = url,
165 + source = ltn12.source.string(reqbody),
166 + headers = header,
167 + sink = ltn12.sink.table(body)
168 + }
169 + print("code:"..code)
170 + if code~= 200 then
171 + return
172 + else
173 + return body
174 + end
175 +end
176 +
177 +function getMessageUrl(lineMessage)
178 + local url = "https://notify-api.line.me/api/notify"
179 + local reqMess = "message="..lineMessage
180 + local headers =
181 + {
182 + ["Authorization"] = "Bearer "..LineToken,
183 + ["Content-Type"] = "application/x-www-form-urlencoded",
184 + ["Content-Length"] = #reqMess
185 + }
186 +
187 + print("Get the link:"..url)
188 + getHttpsUrl(url, headers, reqMess)
189 +end
190 +
191 +
192 +function linenotify.main()
193 + local bitValue = addr_getbit("@test");
194 + local message = ''
195 + print("b=="..bitValue)
196 + if bitValue == 1 and bitValue ~= tempBit then
197 + message = 'Alarm V-Box triggered, the output is '.. bitValue
198 + getMessageUrl(message)
199 + print("Notification pushed of triggering alarm,"..bitValue)
200 + elseif bitValue == 0 and bitValue ~= tempBit then
201 + message = 'Alarm V-Box dismissed, the output is '.. bitValue
202 + getMessageUrl(message)
203 + print("Notification pushed of dismissing alarm,"..bitValue)
204 + end
205 + tempBit = bitValue----Prevent monitoring values from continuous being sent to the platform
206 +
207 + local wordValue = addr_getword("@t2")
208 + print("w=="..wordValue)
209 + --dosomething
210 + if wordValue >= 100 and wordValue ~= tempWord and tempWord <= 100 then
211 + message = 'Alarm V-Box triggered, the temperature is '.. wordValue
212 + getMessageUrl(message)
213 + print("Notification pushed of triggering alarm,"..wordValue)
214 + elseif wordValue < 100 and wordValue ~= tempWord and tempWord >= 100 then
215 + message = 'Alarm V-Box dismissed, the temperature is '.. wordValue
216 + getMessageUrl(message)
217 + print("Notification pushed of dismissing alarm,"..wordValue)
218 + end
219 + tempWord = wordValue----Prevent monitoring values from continuous being sent to the platform
220 +end
221 +{{/code}}
222 +
223 +== **1.7 Twilio WhatsApp Messaging** ==
224 +
225 +This example shows how to use the Twilio API to send WhatsApp message to private number. When monitoring bit "@testBit" changes, it will trigger and send the message. Please replace with your own SID, Token, twilioPhoneNumber and receiverPhoneNumber.
226 +
227 +About how to register the Twilio API, please check the following video:
228 +
229 +[[https:~~/~~/www.youtube.com/watch?v=Id4lKichauU>>https://www.youtube.com/watch?v=Id4lKichauU]]
230 +
231 +{{code language="Lua"}}
232 +local tempBit = 0
233 +local tempWord = 0
234 +
235 +local https = require("https")
236 +local json = require("json")
237 +local ltn12 = require("ltn12")
238 +
239 +local SID = 'AC1703bd710ffa98006d2bcc0b********'
240 +local Token = 'd3c11897623c39e538b20263ec19****'
241 +
242 +local twilioPhoneNumber = '+14155238886'
243 +local receiverPhoneNumber = '+8615880018277'
244 +
245 +local b='ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/'
246 +function encodingBase64(data)
247 + return ((data:gsub('.', function(x)
248 + local r,b='',x:byte()
249 + for i=8,1,-1 do r=r..(b%2^i-b%2^(i-1)>0 and '1' or '0') end
250 + return r;
251 + end)..'0000'):gsub('%d%d%d?%d?%d?%d?', function(x)
252 + if (#x < 6) then return '' end
253 + local c=0
254 + for i=1,6 do c=c+(x:sub(i,i)=='1' and 2^(6-i) or 0) end
255 + return b:sub(c+1,c+1)
256 + end)..({ '', '==', '=' })[#data%3+1])
257 +end
258 +
259 +function encodeUrl(str)
260 + str = string.gsub(str, "([^%w%.%- ])", function(c)
261 + return string.format("%%%02X", string.byte(c)) end)
262 + return string.gsub(str, " ", "+")
263 +end
264 +
265 +
266 +
267 +
268 +function requestBodySplice(message, sender, receiver)
269 + local reqBody = ''
270 + local encodeMess = encodeUrl(message)
271 + local encodeSend = encodeUrl(sender)
272 + local encodeRece = encodeUrl(receiver)
273 + --reqBody = "Body=Hello%20Wecon2&From=whatsapp%3A%2B14155238886&To=whatsapp%3A%2B8615880018277"
274 + reqBody = string.format("Body=%s&From=whatsapp:%s&To=whatsapp:%s", encodeMess, encodeSend, encodeRece)
275 + print(reqBody)
276 + return reqBody
277 +end
278 +
279 +
280 +-- Send http.get request and return response result
281 +function getHttpsUrl(url,header,reqbody)
282 + local body = {}
283 + local bodyJson = json.encode(body)
284 + local result_table, code, headers, status = https.request{
285 + method = "POST",
286 + url = url,
287 + source = ltn12.source.string(reqbody),
288 + headers = header,
289 + sink = ltn12.sink.table(body)
290 + }
291 + print("code:"..code)
292 + if code~= 200 then
293 + return
294 + else
295 + return body
296 + end
297 +end
298 +
299 +function getMessageUrl(whatsAppMessage)
300 + local auth = SID..':'..Token
301 + local url = "https://api.twilio.com/2010-04-01/Accounts/"..SID.."/Messages"
302 + --local reqMess = "message="..twilioMessage
303 + local reqMess = requestBodySplice(whatsAppMessage, twilioPhoneNumber, receiverPhoneNumber)
304 + local headers =
305 + {
306 + ["Authorization"] = "Basic "..encodingBase64(auth),
307 + ["Content-Type"] = "application/x-www-form-urlencoded",
308 + ["Content-Length"] = #reqMess
309 + }
310 +
311 + print("Get the link:"..url)
312 + getHttpsUrl(url, headers, reqMess)
313 +end
314 +
315 +
316 +
317 +function Twilio.main()
318 + --dosomething
319 + --local auth = SID..':'..Token
320 + --print(requestBodySplice("HelloWorld", twilioPhoneNumber, receiverPhoneNumber))
321 + --print(encodingBase64(auth))
322 + local bitValue = addr_getbit("@testBit");
323 + local message = ''
324 + print("b=="..bitValue)
325 + if bitValue == 1 and bitValue ~= tempBit then
326 + message = 'Alarm V-Box triggered, the output is '.. bitValue
327 + getMessageUrl(message)
328 + print("Notification pushed of triggering alarm,"..bitValue)
329 + elseif bitValue == 0 and bitValue ~= tempBit then
330 + message = 'Alarm V-Box dismissed, the output is '.. bitValue
331 + getMessageUrl(message)
332 + print("Notification pushed of dismissing alarm,"..bitValue)
333 + end
334 + tempBit = bitValue----Prevent monitoring values from continuous being sent to the platform
335 +
336 + local wordValue = addr_getword("@testWord")
337 + print("w=="..wordValue)
338 + --dosomething
339 + if wordValue >= 100 and wordValue ~= tempWord and tempWord <= 100 then
340 + message = 'Alarm V-Box triggered, the temperature is '.. wordValue
341 + getMessageUrl(message)
342 + print("Notification pushed of triggering alarm,"..wordValue)
343 + elseif wordValue < 100 and wordValue ~= tempWord and tempWord >= 100 then
344 + message = 'Alarm V-Box dismissed, the temperature is '.. wordValue
345 + getMessageUrl(message)
346 + print("Notification pushed of dismissing alarm,"..wordValue)
347 + end
348 + tempWord = wordValue----Prevent monitoring values from continuous being sent to the platform
349 +end
350 +{{/code}}
351 +
352 +== **1.8 How to parse value from HTTP response body** ==
353 +
354 +This example use [[https:~~/~~/www.weatherapi.com/>>https://www.weatherapi.com/]] as example, to show how to parse value from HTTP response body. When we input the city name into address "@HDW5050":
355 +
356 +(% style="text-align:center" %)
357 +[[image:InputHTTPparameter.png]]
358 +
359 +Then the response body would be like as following:
360 +
361 +{{code language="json"}}
362 +{
363 + "location": {
364 + "name": "Madrid",
365 + "region": "Madrid",
366 + "country": "Spain",
367 + "lat": 40.4,
368 + "lon": -3.68,
369 + "tz_id": "Europe/Madrid",
370 + "localtime_epoch": 1669022636,
371 + "localtime": "2022-11-21 10:23"
372 + },
373 + "current": {
374 + "last_updated_epoch": 1669022100,
375 + "last_updated": "2022-11-21 10:15",
376 + "temp_c": 13.0,
377 + "temp_f": 55.4,
378 + "is_day": 1,
379 + "condition": {
380 + "text": "Partly cloudy",
381 + "icon": "//cdn.weatherapi.com/weather/64x64/day/116.png",
382 + "code": 1003
383 + },
384 + "wind_mph": 11.9,
385 + "wind_kph": 19.1,
386 + "wind_degree": 210,
387 + "wind_dir": "SSW",
388 + "pressure_mb": 1015.0,
389 + "pressure_in": 29.97,
390 + "precip_mm": 0.0,
391 + "precip_in": 0.0,
392 + "humidity": 88,
393 + "cloud": 75,
394 + "feelslike_c": 10.8,
395 + "feelslike_f": 51.4,
396 + "vis_km": 10.0,
397 + "vis_miles": 6.0,
398 + "uv": 3.0,
399 + "gust_mph": 22.1,
400 + "gust_kph": 35.6
401 + }
402 +}
403 +{{/code}}
404 +
405 +(% class="wikigeneratedid" %)
406 +So we decode json into lua object to assign the value into addresses HDW6060(temperature), HDW7070(humidity), the code example like follows:
407 +
408 +{{code language="lua"}}
409 +local APIkey = '70faaecf926b4341b1974006221711'
410 +
411 +
412 +local http = require("socket.http")
413 +local json = require("json")
414 +
415 +-- Send http.get request and return response result
416 +function getHttpsUrl(url)
417 + local result_table, code, headers, status = http.request(url)
418 + print("code:"..code)
419 + if code~= 200 then
420 + return
421 + else
422 + return result_table
423 + end
424 +end
425 +
426 +function sendAPI(key, city)
427 + local url = "http://api.weatherapi.com/v1/current.json?key="..key.."&q="..city.."&aqi=no"
428 + --local url = 'http://v-box.net'
429 + --local url = 'https://www.google.com/'
430 + --http://api.weatherapi.com/v1/current.json?key=70faaecf926b4341b1974006221711&q=Barcelona&aqi=no
431 + print("Get the link:"..url)
432 + local body = getHttpsUrl(url)
433 + --print(body)
434 + local jsonBody = json.decode(body)
435 + --print(jsonBody["current"]["temp_c"])
436 + --print(type(jsonBody["current"]["temp_c"]))
437 + --print(type(jsonBody["current"]["humidity"]))
438 + addr_setfloat("@HDW6060", jsonBody["current"]["temp_c"])
439 + addr_setword("@HDW7070", jsonBody["current"]["humidity"])
440 +end
441 +
442 +
443 +function Weather.main()
444 + local cityName = addr_getstring("@HDW5050",6)
445 + print("cityName: "..cityName)
446 + sendAPI(APIkey, cityName)
447 +end
448 +{{/code}}
449 +
139 139  = **2 V-Box connect with third part server** =
140 140  
141 141  V-Box have two mode.One is for V-Net,User need to use WECON server to store data.We call this V-NET platform.
... ... @@ -154,150 +154,279 @@
154 154  
155 155  (% class="mark" %)2.If your server requires SSL certificate to log in,please use OpenCloud.Because only OpenCloud platform can support to upload certificate
156 156  
157 -== **2.1 V-Box connect with customer server:grouprobotinfo.com** ==
468 +{{info}}
469 +**✎Note: **Before program the script of MQTT, please make sure the server(MQTT broker) can be connected through MQTT Client tool.
470 +{{/info}}
158 158  
472 +(% class="wikigeneratedid" %)
473 +Tool link: **[[MQTT.fx>>http://mqttfx.jensd.de/index.php/download]]**
474 +
475 +== **2.1 V-Box connect with test server(General Example)** ==
476 +
477 +{{code language="lua"}}
478 +--MQTT configuration table
479 +local MQTT_CFG={}
480 +MQTT_CFG.username = "weconsupport"
481 +MQTT_CFG.password = "123456"
482 +MQTT_CFG.netway = 0
483 +MQTT_CFG.keepalive = 60
484 +MQTT_CFG.cleansession = 1
485 +--TCP URL
486 +MQTT_URL = "tcp://mq.tongxinmao.com:1883"
487 +--Client ID
488 +MQTT_CLIENT_ID = "V-BOXH-AG"
489 +
490 +--Generate UUID
491 +function uuid()
492 + local seed = {'e','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'}
493 + local tb = {}
494 + for i=1, 32 do
495 + table.insert(tb, seed[math.random(1,16)])
496 + end
497 + local sid=table.concat(tb)
498 + return string.format('%s',
499 + string.sub(sid,1,32)
500 + )
501 +end
502 +
503 +
504 +--Topic name to subscribed
505 +local SUBSCRIBE_TOPIC = 'testtopic/test/no1/123456'
506 +
507 +--Topic name to be published
508 +local PUBLISH_TOPIC = 'testtopic/test/no1/7890'
509 +
510 +
511 +--real time
512 +local LAST_TIME = 0
513 +
514 +
515 +--initialize mqtt
516 +function mqtt_init()
517 + print(string.format("mqtt init mqtt_url:%s mqtt_clientid:%s", MQTT_URL, MQTT_CLIENT_ID))
518 + if g_mq then
519 + mqtt.close() --Close mqtt object
520 + end
521 + g_mq, err = mqtt.create(MQTT_URL, MQTT_CLIENT_ID) -- create mqtt object,and declare it as a global variable
522 + if g_mq then
523 + g_mq:on("message", mqtt_msg_callback) -- Register a callback for receiving messages
524 + g_mq:on("offline", mqtt_msg_offline) -- Register a callback for offline
525 + print("mqtt init success")
526 + else
527 + print("mqtt init failed:", err)
528 + end
529 +end
530 +
531 +-- connect to mqtt
532 +function mqtt_connect()
533 + print("mqtt connecting...")
534 + local stat, err = g_mq:connect(MQTT_CFG)
535 + if stat == nil then
536 + print("mqtt connect failed:", err)
537 + return
538 + else
539 + print("mqtt connected")
540 + end
541 + g_mq:subscribe(SUBSCRIBE_TOPIC, 0)
542 +end
543 +
544 +-- Received message callback function
545 +function mqtt_msg_callback(topic, msg)
546 + print("topic:", topic)
547 + print("msg:", msg)
548 + local objMsg = json.decode(msg)
549 + local water = objMsg.data.waterlevel
550 + local temp = objMsg.data.temperature
551 + addr_setword("@HDW20",water)
552 + addr_setword("@HDW10",temp)
553 +end
554 +
555 +--Send data (data upload to platform and encapsulate it with custom functions)
556 +function send_data()
557 + local pub_data = {
558 + timestamp = os.time(),
559 + messageId = 1,
560 + event = 'test_data',
561 + mfrs = 'V-Box',
562 + data = {
563 + id = uuid(),
564 + waterlevel = addr_getword("@HDW10"),
565 + temperature = addr_getword("@HDW20")
566 + }
567 + }
568 + return g_mq:publish(PUBLISH_TOPIC, json.encode(pub_data), 0, 0)
569 +end
570 +
571 +
572 +--main function fixed timed execution
573 +function MQTT.main()
574 + --dosomething
575 + print(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " main start")
576 + --determine the mqtt object whether exist
577 + if g_mq then
578 + --determine the mqtt object whether has been connected or not
579 + if g_mq:isconnected() then
580 + send_data()
581 + else
582 + --if exceed 5 sec not connect, reconnect once
583 + if os.time() - LAST_TIME > 5 then
584 + LAST_TIME = os.time()
585 + --reinitial the mqtt object
586 + mqtt_init()
587 + --connect to mqtt or reconnect
588 + mqtt_connect()
589 + end
590 + end
591 + else
592 + --mqtt object does not exist so create new one
593 + mqtt_init()
594 + end
595 + print(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " main end")
596 +end
597 +{{/code}}
598 +
599 +== **2.2 V-Box connect with customer server:grouprobotinfo.com** ==
600 +
159 159  This demo does not use SSL certification. Script is as below
160 160  
161 161  Demo1:
162 162  
163 -(% class="box infomessage" %)
164 -(((
165 -~-~- Meta class
166 -~-~-main
605 +{{code language="lua"}}
606 +-- Meta class
607 +--main
167 167  function mq.main()
168 168   if not mq.m then
169 169   local err = ""
170 -\\ mq.m, err = mqtt.create("tcp:~/~/grouprobotinfo.com:1883", "ClienID") ~-~- create connection
611 +
612 + mq.m, err = mqtt.create("tcp://grouprobotinfo.com:1883", "ClienID") -- create connection
171 171   if mq.m then
172 172   mq.config = {
173 - username = "",~-~- ID
174 - password = "",~-~- password
175 - netway = 1, ~-~- Ethernet connection, WIFI=1
176 - ~-~- keepalive = 100, ~-~- Optional, set the connection heartbeat interval for 100 seconds.
177 - ~-~- cleansession = 0, ~-~- Optional, keep session
615 + username = "",-- ID
616 + password = "",-- password
617 + netway = 1, -- Ethernet connection, WIFI=1
618 + -- keepalive = 100, -- Optional, set the connection heartbeat interval for 100 seconds.
619 + -- cleansession = 0, -- Optional, keep session
178 178   }
179 - mq.m:on("message", function(topic, msg) ~-~- Register for receiving message callbacks
621 + mq.m:on("message", function(topic, msg) -- Register for receiving message callbacks
180 180   local str = string.format("%s:%s", topic, msg)
181 - ~-~- print("mqtt msg:", str) ~-~- Print out the received topics and content
182 - end
183 - )
184 - mq.m:on("offline", function (cause) ~-~- Register for lost connection callbacks
185 - ~-~- addr_setstring("@xxx", "cause"..(cause or " got nil"))
623 + -- print("mqtt msg:", str) -- Print out the received topics and content
186 186   end)
187 - mq.m:on("arrived", function() ~-~- Registration for sending messages to callbacks 
625 + mq.m:on("offline", function (cause) -- Register for lost connection callbacks
626 + -- addr_setstring("@xxx", "cause"..(cause or " got nil"))
627 + end)
628 + mq.m:on("arrived", function() -- Registration for sending messages to callbacks
188 188   print("msg arrived")
189 189   end)
190 190   else
191 - print("mqtt create failed:", err) ~-~- Create object failed
632 + print("mqtt create failed:", err) -- Create object failed
192 192   end
193 193   else
194 - if mq.m:isconnected() then ~-~- If online, post a message
635 + if mq.m:isconnected() then -- If online, post a message
195 195   local phaseStatus ="unknow"
196 196   if addr_getbit("@Standby")== 1 then
197 - phaseStatus = "Standby"
638 + phaseStatus = "Standby"
198 198   elseif addr_getbit("@Pre-Freeze")==1 then
199 - phaseStatus= "Pre-Freeze"
640 + phaseStatus= "Pre-Freeze"
200 200   elseif addr_getbit("@Prepare")==1 then
201 - phaseStatus ="Prepare"
642 + phaseStatus ="Prepare"
202 202   elseif addr_getbit("@Primary Dry")==1 then
203 - phaseStatus = "Primary dry"
644 + phaseStatus = "Primary dry"
204 204   elseif addr_getbit("@Secondary Dry")==1 then
205 - phaseStatus = "Secondary Dry"
646 + phaseStatus = "Secondary Dry"
206 206   end
207 -~-~- print(addr_getbit("@Primary Dry"))
208 -~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--
648 + --print(addr_getbit("@Primary Dry"))
649 +-------------------------------------------------------------------------------------------------------------------------
209 209   local activating ="unknow"
210 210   if addr_getbit("@Compressor")==1 then
211 - activating = ",".."Compressor"
652 + activating = ",".."Compressor"
212 212   end
213 213   if addr_getbit("@Silicone Pump")==1 then
214 - activating = activating..",".."Silicone Pump"
655 + activating = activating..",".."Silicone Pump"
215 215   end
216 216   if addr_getbit("@Vacuum Pump")==1 then
217 - activating = activating..",".."Vacuum Pump"
658 + activating = activating..",".."Vacuum Pump"
218 218   end
219 219   if addr_getbit("@Root Pump")==1 then
220 - activating = activating..",".."Root Pump"
661 + activating = activating..",".."Root Pump"
221 221   end
222 222   if addr_getbit("@Heater")==1 then
223 - activating = activating..",".."Heater"
664 + activating = activating..",".."Heater"
224 224   end
225 225   if addr_getbit("@Valve Silicone")==1 then
226 - activating = activating..",".."Valve Silicone"
667 + activating = activating..",".."Valve Silicone"
227 227   end
228 228   if addr_getbit("@Valve Ice Condenser")==1 then
229 - activating = activating..",".."Valve Ice Condenser"
670 + activating = activating..",".."Valve Ice Condenser"
230 230   end
231 231   if addr_getbit("@Valve Vacuum Pump")==1 then
232 - activating = activating..",".."Valve Vacuum Pump"
673 + activating = activating..",".."Valve Vacuum Pump"
233 233   end
234 234   local pr_activating =string.sub(activating,2)
235 - ~-~- print(pr_activating) 
236 -
237 -
676 + -- print(pr_activating)
238 238   local status_text ="unknow"
239 239   if addr_getbit("@Status Run")==1 then
240 - status_text = "RUNNING"
679 + status_text = "RUNNING"
241 241   else
242 - status_text = "STOP"
681 + status_text = "STOP"
243 243   end
244 -~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~--
245 -\\ local js = {type="status",
246 - mc_name ="FD300",
247 - status=status_text,
248 - elapsed_time={
249 - hour=addr_getword("@Elapsed Time (Hour)"),
250 - min=addr_getword("@Elapsed Time (Minute)"),
251 - sec=addr_getword("@Elapsed Time (Second)")
252 - },
253 - phase = phaseStatus,
254 - step = addr_getword("@Step"),
255 - activating_output = pr_activating,
256 - sv=addr_getshort("@SV Silicone")/10,
257 - pv=addr_getshort("@PV Silicone")/10,
258 - product1=addr_getshort("@Product 1")/10,
259 -\\ product2=addr_getshort("@Product 2")/10,
260 - product3=addr_getshort("@Product 3")/10,
261 - product4=addr_getshort("@Product 4")/10,
262 - ice1=addr_getshort("@Ice condenser 1")/10,
263 - ice2=addr_getshort("@Ice condenser 2")/10,
264 - vacuum=addr_getfloat("@Vacuum")
265 -\\ }
683 +-------------------------------------------------------------------------------------------------------------------------
684 + local js = {type="status",
685 + mc_name ="FD300",
686 + status=status_text,
687 + elapsed_time={
688 + hour=addr_getword("@Elapsed Time (Hour)"),
689 + min=addr_getword("@Elapsed Time (Minute)"),
690 + sec=addr_getword("@Elapsed Time (Second)")
691 + },
692 + phase = phaseStatus,
693 + step = addr_getword("@Step"),
694 + activating_output = pr_activating,
695 + sv=addr_getshort("@SV Silicone")/10,
696 + pv=addr_getshort("@PV Silicone")/10,
697 + product1=addr_getshort("@Product 1")/10,
698 +
699 + product2=addr_getshort("@Product 2")/10,
700 + product3=addr_getshort("@Product 3")/10,
701 + product4=addr_getshort("@Product 4")/10,
702 + ice1=addr_getshort("@Ice condenser 1")/10,
703 + ice2=addr_getshort("@Ice condenser 2")/10,
704 + vacuum=addr_getfloat("@Vacuum")
705 + }
266 266   local jsAlarm = { HPC = addr_getbit("@B_25395#W0.00"),
267 - ODPC = addr_getbit("@B_25395#W0.01"),
268 - MTPC=addr_getbit("@B_25395#W0.02"),
269 - HTT = addr_getbit("@B_25395#W1.03"),
270 - CPC = addr_getbit("@B_25395#W0.08"),
271 - CPSP =addr_getbit("@B_25395#W1.00"),
272 - CPVP =addr_getbit("@B_25395#W0.10"),
273 - CPRP =addr_getbit("@B_25395#W0.11"),
274 - HP =addr_getbit("@B_25395#W1.01"),
275 - PP= addr_getbit("@B_25395#W1.02"),
276 - PO=addr_getbit("@B_25395#W0.07"),
277 - FSE=addr_getbit("@B_25395#W2.04"),
278 - AVVSVV=addr_getbit("@B_25395#W1.12"),
279 - ICHT=addr_getbit("@B_25395#W3.06")
280 -
281 - }
282 -\\ ~-~- ("@B_25395#CIO1.02")
707 + ODPC = addr_getbit("@B_25395#W0.01"),
708 + MTPC=addr_getbit("@B_25395#W0.02"),
709 + HTT = addr_getbit("@B_25395#W1.03"),
710 + CPC = addr_getbit("@B_25395#W0.08"),
711 + CPSP =addr_getbit("@B_25395#W1.00"),
712 + CPVP =addr_getbit("@B_25395#W0.10"),
713 + CPRP =addr_getbit("@B_25395#W0.11"),
714 + HP =addr_getbit("@B_25395#W1.01"),
715 + PP= addr_getbit("@B_25395#W1.02"),
716 + PO=addr_getbit("@B_25395#W0.07"),
717 + FSE=addr_getbit("@B_25395#W2.04"),
718 + AVVSVV=addr_getbit("@B_25395#W1.12"),
719 + ICHT=addr_getbit("@B_25395#W3.06")
720 + }
721 + -- ("@B_25395#CIO1.02")
283 283   mq.m:publish("mqtt-v-box-epsilon-fd300", json.encode(js) , 0, 0)
284 284   mq.m:publish("mqtt-v-box-epsilon-alarm-fd300", json.encode(jsAlarm) , 0, 0)
285 285   else
286 - local stat, err = mq.m:connect(mq.config) ~-~- connection
287 - if stat == nil then ~-~-Determine whether to connect
725 + local stat, err = mq.m:connect(mq.config) -- connection
726 + if stat == nil then --Determine whether to connect
288 288   print("mqtt connect failed:", err)
289 - return ~-~- Connection failed, return directly
728 + return -- Connection failed, return directly
290 290   end
291 - mq.m:subscribe("mqtt-v-box-epsilon", 0)~-~- Subscribe to topics
292 -\\ end
293 - ~-~- mq.m:unsubscribe("stc/test")
294 - ~-~- mq.m:disconnect() ~-~- close matt
295 - ~-~- mq.m:close() ~-~- close clase
730 + mq.m:subscribe("mqtt-v-box-epsilon", 0)-- Subscribe to topics
731 +
732 + end
733 + -- mq.m:unsubscribe("stc/test")
734 + -- mq.m:disconnect() -- close matt
735 + -- mq.m:close() -- close clase
296 296   end
297 297  end
298 -)))
738 +{{/code}}
299 299  
300 -== **2.2 V-Box connect with Azure platform** ==
740 +== **2.3 V-Box connect with Azure platform** ==
301 301  
302 302  In this demo,V-Box connects with Azure by SSL certification.
303 303  
... ... @@ -428,7 +428,7 @@
428 428  end
429 429  )))
430 430  
431 -== **2.3 How to configure the Huawei platform?（✎Note: Huawei IOT DA function is only in China area.If you want this function,you need to use chinese mobile to register）** ==
871 +== **2.4 How to configure the Huawei platform?（✎Note: Huawei IOT DA function is only in China area.If you want this function,you need to use chinese mobile to register）** ==
432 432  
433 433  1.Register a account: [[https:~~/~~/www.huaweicloud.com/intl/en-us/s/JUlPVERNJQ>>https://www.huaweicloud.com/intl/en-us/s/JUlPVERNJQ]]
434 434  
... ... @@ -577,7 +577,7 @@
577 577  (% style="text-align:center" %)
578 578  [[image:1624441186851-536.png||height="434" width="700" class="img-thumbnail"]]
579 579  
580 -== **2.4 V-Box connect with Huawei platform** ==
1020 +== **2.5 V-Box connect with Huawei platform** ==
581 581  
582 582  In this demo,V-Box connects with Huawei by SSL certification.
583 583  
... ... @@ -698,7 +698,7 @@
698 698  (% style="text-align:center" %)
699 699  [[image:1624506666650-161.png||height="547" width="1000" class="img-thumbnail"]]
700 700  
701 -== **2.5 V-Box connect with AWS platform** ==
1141 +== **2.6 V-Box connect with AWS platform** ==
702 702  
703 703  === **Log in AWS** ===
704 704  
... ... @@ -723,331 +723,269 @@
723 723  
724 724  {{code language="java"}}
725 725  {
726 -
727 727    "Version": "2012-10-17",
728 -
729 729    "Statement": [
730 -
731 731      {
732 -
733 733        "Effect": "Allow",
734 -
735 735        "Action": [
736 -
737 737          "iot:Connect",
738 -
739 739          "iot:Publish",
740 -
741 741          "iot:Subscribe",
742 -
743 743          "iot:Receive",
744 -
745 745          "greengrass:Discover"
746 -
747 747        ],
748 -
749 749        "Resource": "*"
750 -
751 751      }
752 -
753 753    ]
754 -
755 755  }
756 756  {{/code}}
757 757  
758 -1. **Create things**
1183 +=== **Create things** ===
759 759  
760 760  Click “Manage”~-~-->“Things”~-~-->“Create things”~-~-->“Create single thing”
761 761  
1187 +[[image:image-20220709165402-6.png]]
762 762  
763 -|
764 -| |[[image:image-20220709165402-6.png]]
1189 +[[image:image-20220709165402-7.png]]
765 765  
766 -|
767 -| |[[image:image-20220709165402-7.png]]
768 -
769 -|
770 -| |[[image:image-20220709165402-8.png]]
771 -
772 772  Name the thing~-~-->Click “Next”
773 773  
1193 +[[image:image-20220709165402-8.png]]
774 774  
775 775  Select the way to create certificate
776 776  
1197 +[[image:image-20220709165402-9.png]]
777 777  
778 -|
779 -| |[[image:image-20220709165402-9.png]]
780 -
781 781  Select policy
782 782  
1201 +[[image:image-20220709165402-10.png]]
783 783  
784 -|
785 -| |[[image:image-20220709165402-10.png]]
1203 +[[image:image-20220709165402-11.png]]
786 786  
787 787  
1206 +=== **Test with MQTT.fx tool** ===
788 788  
789 -
790 -
791 -
792 -
793 -
794 -
795 -|
796 -| |[[image:image-20220709165402-11.png]]
797 -
798 -
799 -
800 -
801 -
802 -
803 -1. **Test with MQTT.fx tool**
804 -
805 805  Click “View Setting” to get the “Broker Adress”
806 806  
1210 +[[image:image-20220709165402-13.png]]
807 807  
808 -|
809 -| |[[image:image-20220709165402-12.png]]
1212 +[[image:image-20220709165402-12.png]]
810 810  
811 -|
812 -| |[[image:image-20220709165402-13.png]]
813 -
814 -
815 -
816 -
817 -
818 -
819 -
820 -
821 -|
822 -| |[[image:image-20220709165402-14.png]]
823 -
824 824  Create one connection in MQTT.fx tool, set broker port as 8883.
825 825  
1216 +[[image:image-20220709165402-14.png]]
1217 +
826 826  Upload the CA File, Client Certificate File, Client Key File
827 827  
1220 +[[image:image-20220709165402-15.png]]
828 828  
829 -|
830 -| |[[image:image-20220709165402-15.png]]
831 -
832 -
833 833  Publish message to topic “TEST”
834 834  
1224 +[[image:image-20220709165402-17.png]]
835 835  
836 -|
837 -| |[[image:image-20220709165402-16.png]]
838 -
839 -|
840 -| |[[image:image-20220709165402-17.png]]
841 -
842 842  Click”Test”~-~-->”MQTT test client”~-~-->”Subscrible to a topic”, to get message publish from MQTT.fx tool.
843 843  
1228 +[[image:image-20220709173500-1.png]]
1229 +
844 844  And we can also send message form AWS platform to MQTT.fx tool.
845 845  
1232 +[[image:image-20220709165402-18.png]]
846 846  
847 -|
848 -| |[[image:image-20220709165402-18.png]]
1234 +=== **Configurate in CloudTool** ===
849 849  
850 -
851 -1. **Configurate in CloudTool**
852 -
853 853  Copy the same setting in MQTT.fx to MQTT configuration
854 854  
1238 +[[image:image-20220709165402-19.png]]
855 855  
856 -|
857 -| |[[image:image-20220709165402-19.png]]
858 -
859 859   Add a lua script and copy the lua demo into it.
860 860  
1242 +[[image:image-20220709165402-20.png]]
861 861  
862 -|
863 -| |[[image:image-20220709165402-20.png]]
1244 +{{info}}
1245 +**✎Note:** Before using the following demo script, please make sure the V-Box firmware is newer than 22110701
1246 +{{/info}}
864 864  
865 -
866 -
1248 +{{code language="lua"}}
867 867  sprint = print
868 868  
869 -~-~-Cloud mode interface to obtain the MQTT information configured by the cloud platform: (5 returns, namely the server address, client ID, connection table, last word table, certificate table)
1251 +--Cloud mode interface to obtain the MQTT information configured by the cloud platform: (5 returns, namely the server address, client ID, connection table, last word table, certificate table)
870 870  
871 871  local MQTT_URL, MQTT_CLIENTID, MQTT_CFG, MQTT_LWT, MQTT_CART = mqtt.setup_cfg()
872 872  
873 -~-~-publish to topics
1255 +--publish to topics
874 874  
875 875  local pub_RE_TOPIC = string.format('TEST')
876 876  
877 -~-~-Subscribe topics
1259 +--Subscribe topics
878 878  
879 879  local Subscribe_RE_TOPIC1 = string.format('TEST')
880 880  
881 -~-~-variable
1263 +--variable
882 882  
883 883  local last_time = 0
884 884  
885 -~-~-Timing main function
1267 +--Timing main function
886 886  
887 887  function aws.main()
888 888  
889 - sprint(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " aws.main start")
1271 + sprint(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " aws.main start")
890 890  
891 - if g_mq then
1273 + if g_mq then
892 892  
893 - if g_mq:isconnected() then
1275 + if g_mq:isconnected() then
894 894  
895 - send_Data()
1277 + send_Data()
896 896  
897 - else
1279 + else
898 898  
899 - if os.time() - last_time > 5 then
1281 + if os.time() - last_time > 5 then
900 900  
901 - last_time = os.time()
1283 + last_time = os.time()
902 902  
903 - mymqtt_connect()
1285 + mymqtt_connect()
904 904  
1287 + end
1288 +
905 905   end
906 906  
907 - end
1291 + else
908 908  
909 - else
1293 + mymqtt_init()
910 910  
911 - mymqtt_init()
1295 + end
912 912  
913 - end
1297 + sprint(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " aws.main end")
914 914  
915 - sprint(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " aws.main end")
916 -
917 917  end
918 918  
919 919  
920 -~-~- Initialize MQTT
921 921  
1303 +-- Initialize MQTT
1304 +
922 922  function mymqtt_init()
923 923  
924 - sprint(string.format("mqtt init mqtt_url:%s mqtt_clientid:%s", MQTT_URL, MQTT_CLIENTID))
1307 + sprint(string.format("mqtt init mqtt_url:%s mqtt_clientid:%s", MQTT_URL, MQTT_CLIENTID))
925 925  
926 - g_mq, err = mqtt.create(MQTT_URL, MQTT_CLIENTID) ~-~- Create the object and declare it as a global variable
1309 + g_mq, err = mqtt.create(MQTT_URL, MQTT_CLIENTID, 1) -- Create the object and declare it as a global variable, 1 means using the domain to connect
927 927  
928 - if g_mq then
1311 + if g_mq then
929 929  
930 - g_mq:on("message", mymqtt_msg_callback) ~-~- Register to receive message callbacks
1313 + g_mq:on("message", mymqtt_msg_callback) -- Register to receive message callbacks
931 931  
932 - sprint("mqtt init success")
1315 + sprint("mqtt init success")
933 933  
934 - else
1317 + else
935 935  
936 - sprint("mqtt init failed:", err)
1319 + sprint("mqtt init failed:", err)
937 937  
938 - end
1321 + end
939 939  
940 940  end
941 941  
942 -~-~- Connect to MQTT server
1325 +-- Connect to MQTT server
943 943  
944 944  function mymqtt_connect()
945 945  
946 - sprint("mqtt connecting...")
1329 + sprint("mqtt connecting...")
947 947  
948 - local stat, err = g_mq:connect(MQTT_CFG,MQTT_LWT, MQTT_CART)
1331 + local stat, err = g_mq:connect(MQTT_CFG,MQTT_LWT, MQTT_CART)
949 949  
950 - if stat == nil then
1333 + if stat == nil then
951 951  
952 - sprint("mqtt connect failed:", err)
1335 + sprint("mqtt connect failed:", err)
953 953  
954 - return
1337 + return
955 955  
956 - else
1339 + else
957 957  
958 - sprint("mqtt connected")
1341 + sprint("mqtt connected")
959 959  
960 - end
1343 + end
961 961  
962 - g_mq:subscribe(TEST, 0)
1345 + g_mq:subscribe(Subscribe_RE_TOPIC1, 0)
963 963  
964 964  end
965 965  
966 -~-~- Receive MQTT message callback function
1349 +-- Receive MQTT message callback function
967 967  
968 968  function mymqtt_msg_callback(topic, msg)
969 969  
970 - print("topic:",topic)
1353 + print("topic:",topic)
971 971  
972 - print("revdata:",msg)
1355 + print("revdata:",msg)
973 973  
974 - local revData = json.decode(msg)
1357 + local revData = json.decode(msg)
975 975  
976 - print (revData)
1359 + print (revData)
977 977  
978 - if topic == Subscribe_RE_TOPIC1 then ~-~-Process topic information subscribed from the cloud
1361 + if topic == Subscribe_RE_TOPIC1 then --Process topic information subscribed from the cloud
979 979  
980 -if string.match(topic,Subscribe_RE_TOPIC1) then
1363 + if string.match(topic,Subscribe_RE_TOPIC1) then
981 981  
982 - ~-~-if revData ~~= nil then
1365 + --if revData ~= nil then
983 983  
984 - for k,v in pairs (revData) do
1367 + for k,v in pairs (revData) do
985 985  
986 - print("printing revdata after kv here")
1369 + print("printing revdata after kv here")
987 987  
988 - print (k,v)
1371 + print (k,v)
989 989  
990 - end
1373 + end
991 991  
992 - print ("current state is",fanstate)
1375 + print ("current state is",fanstate)
993 993  
994 - ~-~-end
1377 + --end
995 995  
996 -end
1379 + end
997 997  
998 -end
1381 + end
999 999  
1000 1000  end
1001 1001  
1002 1002  
1003 -~-~-Get real-time data
1004 1004  
1387 +--Get real-time data
1388 +
1005 1005  function getData()
1006 1006  
1007 - local jdata = {}
1391 + local jdata = {}
1008 1008  
1009 - local addr = bns_get_alldata()
1393 + local addr = bns_get_alldata()
1010 1010  
1011 - print(json.encode(addr))
1395 + print(json.encode(addr))
1012 1012  
1013 - for i,v in pairs(addr) do
1397 + for i,v in pairs(addr) do
1014 1014  
1015 - if v[2] == 1 then
1399 + if v[2] == 1 then
1016 1016  
1017 - jdata[v[3]] = v[4]
1401 + jdata[v[3]] = v[4]
1018 1018  
1019 - end
1403 + end
1020 1020  
1021 - end
1405 + end
1022 1022  
1023 - return jdata
1407 + return jdata
1024 1024  
1025 1025  end
1026 1026  
1027 -~-~-send data
1411 +--send data
1028 1028  
1029 1029  function send_Data()
1030 1030  
1031 - local pub_data =
1415 + local pub_data =
1416 + {
1417 + 123
1418 + }
1032 1032  
1033 - {
1034 -
1035 -123
1036 -
1037 -}
1038 -
1039 1039  sprint(json.encode(pub_data))
1040 1040  
1041 1041  print("..........",pub_RE_TOPIC)
1042 1042  
1043 - return g_mq:publish(pub_RE_TOPIC, json.encode(pub_data), 0, 0)
1424 + return g_mq:publish(pub_RE_TOPIC, json.encode(pub_data), 0, 0)
1044 1044  
1045 1045  end
1427 +{{/code}}
1046 1046  
1047 -
1048 -
1049 1049  Get message in AWS
1050 1050  
1051 -
1052 -|
1053 -| |[[image:image-20220709165402-21.png]]
1431 +[[image:image-20220709165402-21.png]]
InputHTTPparameter.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +17.9 KB
Content
image-20220709173500-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Jim
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 MB
Content