Changes for page 2 Script

Last modified by Devin Chen on 2025/06/06 14:03

From 18.1 to 19.1 From 27.1 to 28.1

From version 19.1

edited by Hunter
on 2022/07/29 15:56

Change comment: There is no comment for this version

To version 27.1

edited by Hunter
on 2022/10/25 09:39

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -13,7 +13,7 @@
  for example. addr_setshort(addr,num) Function: Write 16-bit signed decimal address
  addr_getshort(addr) Function:Read 16-bit signed decimal address
  addr_getword(string addr)Function: Read 16-bit unsigned decimal address
--More script function are in the second section of  [[“V-BOX Script Interface Manual”>>doc:V-BOX.V-Net.04 Lua Script.01 Lua Functions.WebHome]]
++More script function are in the second section of  [[“V-BOX Script Interface Manual”>>doc:V-BOX.V-Net.Manual.04 Lua Script.01 Lua Functions.WebHome]]
  == **1.2 Arithmetic** ==
@@ -70,6 +70,12 @@
  This example shows how to use the Bot API to send message into Telegram group or channel. When monitoring bit "@HDX" changes, it will trigger and send the message. Please replace with your own Token and chat id.
++As for How to get the botToken and chatID, please check the followig videos:
++
++[[https:~~/~~/www.youtube.com/watch?v=zh6yYlnjX7k>>https://www.youtube.com/watch?v=zh6yYlnjX7k]]
++
++[[https:~~/~~/www.youtube.com/watch?v=Pj8mwuMZZvg>>https://www.youtube.com/watch?v=Pj8mwuMZZvg]]
++
  {{code language="Lua"}}
  local tempBit = 0
  local tempWord = 0
@@ -135,7 +135,214 @@
  end
  {{/code}}
++== **1.6 LINE Notify** ==
++This example shows how to use the LINE Notify to send message into LINE group. When monitoring bit "@test" changes, it will trigger and send the message. Please replace with your own Token.
++
++{{code}}
++local tempBit = 0
++local tempWord = 0
++
++local LineToken = "08XCpubkOdwGdGgRTXF0x8umiyrALtoM0v6lBFUV6PC"
++
++local https = require("https")
++local json = require("json")
++local ltn12 = require("ltn12")
++
++-- Send http.get request and return response result
++function getHttpsUrl(url,header,reqbody)
++    local body = {}
++    local bodyJson = json.encode(body)
++    local result_table, code, headers, status = https.request{
++        method = "POST",
++        url = url,
++        source = ltn12.source.string(reqbody),
++        headers = header,
++        sink = ltn12.sink.table(body)
++   }
++    print("code:"..code)
++    if code~= 200 then
++        return
++    else
++        return body
++    end
++end
++
++function getMessageUrl(lineMessage)
++    local url = "https://notify-api.line.me/api/notify"
++    local reqMess = "message="..lineMessage
++    local headers =
++                {
++                        ["Authorization"] = "Bearer "..LineToken,
++                        ["Content-Type"] = "application/x-www-form-urlencoded",
++                        ["Content-Length"] = #reqMess
++                }
++
++    print("Get the link:"..url)
++    getHttpsUrl(url, headers, reqMess)
++end
++
++
++function linenotify.main()
++    local bitValue = addr_getbit("@test");
++    local message = ''
++    print("b=="..bitValue)
++    if bitValue == 1 and bitValue ~= tempBit then
++        message = 'Alarm V-Box triggered, the output is '.. bitValue
++        getMessageUrl(message)
++        print("Notification pushed of triggering alarm,"..bitValue)
++    elseif bitValue == 0 and bitValue ~= tempBit then
++        message = 'Alarm V-Box dismissed, the output is '.. bitValue
++        getMessageUrl(message)
++        print("Notification pushed of dismissing alarm,"..bitValue)
++    end
++    tempBit = bitValue----Prevent monitoring values from continuous being sent to the platform
++
++    local wordValue = addr_getword("@t2")
++    print("w=="..wordValue)
++    --dosomething
++    if wordValue >= 100 and wordValue ~= tempWord and tempWord <= 100 then
++        message = 'Alarm V-Box triggered, the temperature is '.. wordValue
++        getMessageUrl(message)
++        print("Notification pushed of triggering alarm,"..wordValue)
++    elseif wordValue < 100 and wordValue ~= tempWord and tempWord >= 100 then
++        message = 'Alarm V-Box dismissed, the temperature is '.. wordValue
++        getMessageUrl(message)
++        print("Notification pushed of dismissing alarm,"..wordValue)
++    end
++    tempWord = wordValue----Prevent monitoring values from continuous being sent to the platform
++end
++{{/code}}
++
++== **1.7 Twilio WhatsApp Messaging** ==
++
++This example shows how to use the Twilio API to send WhatsApp message to private number. When monitoring bit "@testBit" changes, it will trigger and send the message. Please replace with your own SID, Token, twilioPhoneNumber and receiverPhoneNumber.
++
++About how to register the Twilio API, please check the following video:
++
++[[https:~~/~~/www.youtube.com/watch?v=Id4lKichauU>>https://www.youtube.com/watch?v=Id4lKichauU]]
++
++{{code language="Lua"}}
++local tempBit = 0
++local tempWord = 0
++
++local https = require("https")
++local json = require("json")
++local ltn12 = require("ltn12")
++
++local SID = 'AC1703bd710ffa98006d2bcc0b********'
++local Token = 'd3c11897623c39e538b20263ec19****'
++
++local twilioPhoneNumber = '+14155238886'
++local receiverPhoneNumber = '+8615880018277'
++
++local b='ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/'
++function encodingBase64(data)
++    return ((data:gsub('.', function(x)
++        local r,b='',x:byte()
++        for i=8,1,-1 do r=r..(b%2^i-b%2^(i-1)>0 and '1' or '0') end
++        return r;
++    end)..'0000'):gsub('%d%d%d?%d?%d?%d?', function(x)
++        if (#x < 6) then return '' end
++        local c=0
++        for i=1,6 do c=c+(x:sub(i,i)=='1' and 2^(6-i) or 0) end
++        return b:sub(c+1,c+1)
++    end)..({ '', '==', '=' })[#data%3+1])
++end
++
++function encodeUrl(str)
++    str = string.gsub(str, "([^%w%.%- ])", function(c)
++    return string.format("%%%02X", string.byte(c)) end)
++    return string.gsub(str, " ", "+")
++end
++
++
++
++
++function requestBodySplice(message, sender, receiver)
++    local reqBody = ''
++    local encodeMess = encodeUrl(message)
++    local encodeSend = encodeUrl(sender)
++    local encodeRece = encodeUrl(receiver)
++    --reqBody = "Body=Hello%20Wecon2&From=whatsapp%3A%2B14155238886&To=whatsapp%3A%2B8615880018277"
++    reqBody = string.format("Body=%s&From=whatsapp:%s&To=whatsapp:%s", encodeMess, encodeSend, encodeRece)
++    print(reqBody)
++    return reqBody
++end
++
++
++-- Send http.get request and return response result
++function getHttpsUrl(url,header,reqbody)
++    local body = {}
++    local bodyJson = json.encode(body)
++    local result_table, code, headers, status = https.request{
++        method = "POST",
++        url = url,
++        source = ltn12.source.string(reqbody),
++        headers = header,
++        sink = ltn12.sink.table(body)
++   }
++    print("code:"..code)
++    if code~= 200 then
++        return
++    else
++        return body
++    end
++end
++
++function getMessageUrl(whatsAppMessage)
++    local auth = SID..':'..Token
++    local url = "https://api.twilio.com/2010-04-01/Accounts/"..SID.."/Messages"
++    --local reqMess = "message="..twilioMessage
++    local reqMess = requestBodySplice(whatsAppMessage, twilioPhoneNumber, receiverPhoneNumber)
++    local headers =
++                {
++                        ["Authorization"] = "Basic "..encodingBase64(auth),
++                        ["Content-Type"] = "application/x-www-form-urlencoded",
++                        ["Content-Length"] = #reqMess
++                }
++
++    print("Get the link:"..url)
++    getHttpsUrl(url, headers, reqMess)
++end
++
++
++
++function Twilio.main()
++  --dosomething
++  --local auth = SID..':'..Token
++  --print(requestBodySplice("HelloWorld", twilioPhoneNumber, receiverPhoneNumber))
++  --print(encodingBase64(auth))
++  local bitValue = addr_getbit("@testBit");
++    local message = ''
++    print("b=="..bitValue)
++    if bitValue == 1 and bitValue ~= tempBit then
++        message = 'Alarm V-Box triggered, the output is '.. bitValue
++        getMessageUrl(message)
++        print("Notification pushed of triggering alarm,"..bitValue)
++    elseif bitValue == 0 and bitValue ~= tempBit then
++        message = 'Alarm V-Box dismissed, the output is '.. bitValue
++        getMessageUrl(message)
++        print("Notification pushed of dismissing alarm,"..bitValue)
++    end
++    tempBit = bitValue----Prevent monitoring values from continuous being sent to the platform
++
++    local wordValue = addr_getword("@testWord")
++    print("w=="..wordValue)
++    --dosomething
++    if wordValue >= 100 and wordValue ~= tempWord and tempWord <= 100 then
++        message = 'Alarm V-Box triggered, the temperature is '.. wordValue
++        getMessageUrl(message)
++        print("Notification pushed of triggering alarm,"..wordValue)
++    elseif wordValue < 100 and wordValue ~= tempWord and tempWord >= 100 then
++        message = 'Alarm V-Box dismissed, the temperature is '.. wordValue
++        getMessageUrl(message)
++        print("Notification pushed of dismissing alarm,"..wordValue)
++    end
++    tempWord = wordValue----Prevent monitoring values from continuous being sent to the platform
++end
++{{/code}}
++
  = **2 V-Box connect with third part server** =
  V-Box have two mode.One is for V-Net,User need to use WECON server to store data.We call this V-NET platform.
@@ -154,8 +154,132 @@
  (% class="mark" %)2.If your server requires SSL certificate to log in,please use OpenCloud.Because only OpenCloud platform can support to upload certificate
--== **2.1 V-Box connect with customer server:grouprobotinfo.com** ==
++(% class="wikigeneratedid" %)
++**✎Note: **Before program the script of MQTT, please make sure the server(MQTT broker) can be connected through MQTT Client tool.
++(% class="wikigeneratedid" %)
++Tool link: **[[MQTT.fx>>http://mqttfx.jensd.de/index.php/download]]**
++
++== **2.1 V-Box connect with test server(General Example)** ==
++
++{{code language="lua"}}
++--MQTT configuration table
++local MQTT_CFG={}
++MQTT_CFG.username = "weconsupport"
++MQTT_CFG.password = "123456"
++MQTT_CFG.netway = 0
++MQTT_CFG.keepalive = 60
++MQTT_CFG.cleansession = 1
++--TCP URL
++MQTT_URL = "tcp://mq.tongxinmao.com:1883"
++--Client ID
++MQTT_CLIENT_ID = "V-BOXH-AG"
++
++--Generate UUID
++function uuid()
++    local seed = {'e','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'}
++    local tb = {}
++    for i=1, 32 do
++        table.insert(tb, seed[math.random(1,16)])
++    end
++    local sid=table.concat(tb)
++    return string.format('%s',
++        string.sub(sid,1,32)
++    )
++end
++
++
++--Topic name to subscribed
++local SUBSCRIBE_TOPIC = 'testtopic/test/no1/123456'
++
++--Topic name to be published
++local PUBLISH_TOPIC = 'testtopic/test/no1/7890'
++
++
++--real time
++local LAST_TIME = 0
++
++
++--initialize mqtt
++function mqtt_init()
++    print(string.format("mqtt init mqtt_url:%s mqtt_clientid:%s", MQTT_URL, MQTT_CLIENT_ID))
++    g_mq, err = mqtt.create(MQTT_URL, MQTT_CLIENT_ID) -- create mqtt object,and declare it as a global variable
++    if g_mq then
++        g_mq:on("message", mqtt_msg_callback) -- Register a callback for receiving messages
++        print("mqtt init success")
++    else
++        print("mqtt init failed:", err)
++    end
++end
++
++-- connect to mqtt
++function mqtt_connect()
++    print("mqtt connecting...")
++    local stat, err = g_mq:connect(MQTT_CFG)
++    if stat == nil then
++        print("mqtt connect failed:", err)
++        return
++    else
++        print("mqtt connected")
++    end
++    g_mq:subscribe(SUBSCRIBE_TOPIC, 0)
++end
++
++-- Received message callback function
++function mqtt_msg_callback(topic, msg)
++    print("topic:", topic)
++    print("msg:", msg)
++    local objMsg = json.decode(msg)
++    local water = objMsg.data.waterlevel
++    local temp = objMsg.data.temperature
++    addr_setword("@HDW20",water)
++    addr_setword("@HDW10",temp)
++end
++
++--Send data (data upload to platform and encapsulate it with custom functions)
++function send_data()
++    local pub_data = {
++        timestamp = os.time(),
++        messageId = 1,
++        event = 'test_data',
++        mfrs = 'V-Box',
++        data = {
++            id = uuid(),
++            waterlevel = addr_getword("@HDW10"),
++            temperature = addr_getword("@HDW20")
++        }
++    }
++    return g_mq:publish(PUBLISH_TOPIC, json.encode(pub_data), 0, 0)
++end
++
++
++--main function fixed timed execution
++function MQTT.main()
++    --dosomething
++    print(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " main start")
++    --determine the mqtt object whether exist
++    if g_mq then
++        --determine the mqtt object whether has been connected or not
++        if g_mq:isconnected() then
++            send_data()
++        else
++            --if exceed 20 sec not connect, reconnect once
++            if os.time() - LAST_TIME > 20 then
++                LAST_TIME = os.time()
++                --connect to mqtt or reconnect
++                mqtt_connect()
++            end
++        end
++    else
++        --mqtt object does not exist so create new one
++        mqtt_init()
++    end
++    print(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " main end")
++end
++{{/code}}
++
++== **2.2 V-Box connect with customer server:grouprobotinfo.com** ==
++
  This demo does not use SSL certification. Script is as below
  Demo1:
@@ -303,7 +303,7 @@
  end
  {{/code}}
--== **2.2 V-Box connect with Azure platform** ==
++== **2.3 V-Box connect with Azure platform** ==
  In this demo,V-Box connects with Azure by SSL certification.
@@ -434,7 +434,7 @@
  end
  )))
--== **2.3 How to configure the Huawei platform?（✎Note: Huawei IOT DA function is only in China area.If you want this function,you need to use chinese mobile to register）** ==
++== **2.4 How to configure the Huawei platform?（✎Note: Huawei IOT DA function is only in China area.If you want this function,you need to use chinese mobile to register）** ==
 .Register a account: [[https:~~/~~/www.huaweicloud.com/intl/en-us/s/JUlPVERNJQ>>https://www.huaweicloud.com/intl/en-us/s/JUlPVERNJQ]]
@@ -583,7 +583,7 @@
  (% style="text-align:center" %)
  [[image:1624441186851-536.png||height="434" width="700" class="img-thumbnail"]]
--== **2.4 V-Box connect with Huawei platform** ==
++== **2.5 V-Box connect with Huawei platform** ==
  In this demo,V-Box connects with Huawei by SSL certification.
@@ -704,7 +704,7 @@
  (% style="text-align:center" %)
  [[image:1624506666650-161.png||height="547" width="1000" class="img-thumbnail"]]
--== **2.5 V-Box connect with AWS platform** ==
++== **2.6 V-Box connect with AWS platform** ==
  === **Log in AWS** ===

Changes for page 2 Script

Summary

Details

Navigation

Table of Contents