Skip to Content

Changes for page 2 Script

Last modified by Devin Chen on 2025/06/06 14:03
From version 19.1
edited by Hunter
on 2022/07/29 15:56
Change comment: There is no comment for this version
To version 31.1
edited by Hunter
on 2022/11/22 09:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -13,7 +13,7 @@
13 13  for example. addr_setshort(addr,num) Function: Write 16-bit signed decimal address
14 14  addr_getshort(addr) Function:Read 16-bit signed decimal address
15 15  addr_getword(string addr)Function: Read 16-bit unsigned decimal address
16 -More script function are in the second section of [[“V-BOX Script Interface Manual”>>doc:V-BOX.V-Net.04 Lua Script.01 Lua Functions.WebHome]]
16 +More script function are in the second section of [[“V-BOX Script Interface Manual”>>doc:V-BOX.V-Net.Manual.04 Lua Script.01 Lua Functions.WebHome]]
17 17  
18 18  == **1.2 Arithmetic** ==
19 19  
... ... @@ -70,6 +70,12 @@
70 70  
71 71  This example shows how to use the Bot API to send message into Telegram group or channel. When monitoring bit "@HDX" changes, it will trigger and send the message. Please replace with your own Token and chat id.
72 72  
73 +As for How to get the botToken and chatID, please check the followig videos:
74 +
75 +[[https:~~/~~/www.youtube.com/watch?v=zh6yYlnjX7k>>https://www.youtube.com/watch?v=zh6yYlnjX7k]]
76 +
77 +[[https:~~/~~/www.youtube.com/watch?v=Pj8mwuMZZvg>>https://www.youtube.com/watch?v=Pj8mwuMZZvg]]
78 +
73 73  {{code language="Lua"}}
74 74  local tempBit = 0
75 75  local tempWord = 0
... ... @@ -135,7 +135,312 @@
135 135  end
136 136  {{/code}}
137 137  
144 +== **1.6 LINE Notify** ==
138 138  
146 +This example shows how to use the LINE Notify to send message into LINE group. When monitoring bit "@test" changes, it will trigger and send the message. Please replace with your own Token.
147 +
148 +{{code}}
149 +local tempBit = 0
150 +local tempWord = 0
151 +
152 +local LineToken = "08XCpubkOdwGdGgRTXF0x8umiyrALtoM0v6lBFUV6PC"
153 +
154 +local https = require("https")
155 +local json = require("json")
156 +local ltn12 = require("ltn12")
157 +
158 +-- Send http.get request and return response result
159 +function getHttpsUrl(url,header,reqbody)
160 + local body = {}
161 + local bodyJson = json.encode(body)
162 + local result_table, code, headers, status = https.request{
163 + method = "POST",
164 + url = url,
165 + source = ltn12.source.string(reqbody),
166 + headers = header,
167 + sink = ltn12.sink.table(body)
168 + }
169 + print("code:"..code)
170 + if code~= 200 then
171 + return
172 + else
173 + return body
174 + end
175 +end
176 +
177 +function getMessageUrl(lineMessage)
178 + local url = "https://notify-api.line.me/api/notify"
179 + local reqMess = "message="..lineMessage
180 + local headers =
181 + {
182 + ["Authorization"] = "Bearer "..LineToken,
183 + ["Content-Type"] = "application/x-www-form-urlencoded",
184 + ["Content-Length"] = #reqMess
185 + }
186 +
187 + print("Get the link:"..url)
188 + getHttpsUrl(url, headers, reqMess)
189 +end
190 +
191 +
192 +function linenotify.main()
193 + local bitValue = addr_getbit("@test");
194 + local message = ''
195 + print("b=="..bitValue)
196 + if bitValue == 1 and bitValue ~= tempBit then
197 + message = 'Alarm V-Box triggered, the output is '.. bitValue
198 + getMessageUrl(message)
199 + print("Notification pushed of triggering alarm,"..bitValue)
200 + elseif bitValue == 0 and bitValue ~= tempBit then
201 + message = 'Alarm V-Box dismissed, the output is '.. bitValue
202 + getMessageUrl(message)
203 + print("Notification pushed of dismissing alarm,"..bitValue)
204 + end
205 + tempBit = bitValue----Prevent monitoring values from continuous being sent to the platform
206 +
207 + local wordValue = addr_getword("@t2")
208 + print("w=="..wordValue)
209 + --dosomething
210 + if wordValue >= 100 and wordValue ~= tempWord and tempWord <= 100 then
211 + message = 'Alarm V-Box triggered, the temperature is '.. wordValue
212 + getMessageUrl(message)
213 + print("Notification pushed of triggering alarm,"..wordValue)
214 + elseif wordValue < 100 and wordValue ~= tempWord and tempWord >= 100 then
215 + message = 'Alarm V-Box dismissed, the temperature is '.. wordValue
216 + getMessageUrl(message)
217 + print("Notification pushed of dismissing alarm,"..wordValue)
218 + end
219 + tempWord = wordValue----Prevent monitoring values from continuous being sent to the platform
220 +end
221 +{{/code}}
222 +
223 +== **1.7 Twilio WhatsApp Messaging** ==
224 +
225 +This example shows how to use the Twilio API to send WhatsApp message to private number. When monitoring bit "@testBit" changes, it will trigger and send the message. Please replace with your own SID, Token, twilioPhoneNumber and receiverPhoneNumber.
226 +
227 +About how to register the Twilio API, please check the following video:
228 +
229 +[[https:~~/~~/www.youtube.com/watch?v=Id4lKichauU>>https://www.youtube.com/watch?v=Id4lKichauU]]
230 +
231 +{{code language="Lua"}}
232 +local tempBit = 0
233 +local tempWord = 0
234 +
235 +local https = require("https")
236 +local json = require("json")
237 +local ltn12 = require("ltn12")
238 +
239 +local SID = 'AC1703bd710ffa98006d2bcc0b********'
240 +local Token = 'd3c11897623c39e538b20263ec19****'
241 +
242 +local twilioPhoneNumber = '+14155238886'
243 +local receiverPhoneNumber = '+8615880018277'
244 +
245 +local b='ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/'
246 +function encodingBase64(data)
247 + return ((data:gsub('.', function(x)
248 + local r,b='',x:byte()
249 + for i=8,1,-1 do r=r..(b%2^i-b%2^(i-1)>0 and '1' or '0') end
250 + return r;
251 + end)..'0000'):gsub('%d%d%d?%d?%d?%d?', function(x)
252 + if (#x < 6) then return '' end
253 + local c=0
254 + for i=1,6 do c=c+(x:sub(i,i)=='1' and 2^(6-i) or 0) end
255 + return b:sub(c+1,c+1)
256 + end)..({ '', '==', '=' })[#data%3+1])
257 +end
258 +
259 +function encodeUrl(str)
260 + str = string.gsub(str, "([^%w%.%- ])", function(c)
261 + return string.format("%%%02X", string.byte(c)) end)
262 + return string.gsub(str, " ", "+")
263 +end
264 +
265 +
266 +
267 +
268 +function requestBodySplice(message, sender, receiver)
269 + local reqBody = ''
270 + local encodeMess = encodeUrl(message)
271 + local encodeSend = encodeUrl(sender)
272 + local encodeRece = encodeUrl(receiver)
273 + --reqBody = "Body=Hello%20Wecon2&From=whatsapp%3A%2B14155238886&To=whatsapp%3A%2B8615880018277"
274 + reqBody = string.format("Body=%s&From=whatsapp:%s&To=whatsapp:%s", encodeMess, encodeSend, encodeRece)
275 + print(reqBody)
276 + return reqBody
277 +end
278 +
279 +
280 +-- Send http.get request and return response result
281 +function getHttpsUrl(url,header,reqbody)
282 + local body = {}
283 + local bodyJson = json.encode(body)
284 + local result_table, code, headers, status = https.request{
285 + method = "POST",
286 + url = url,
287 + source = ltn12.source.string(reqbody),
288 + headers = header,
289 + sink = ltn12.sink.table(body)
290 + }
291 + print("code:"..code)
292 + if code~= 200 then
293 + return
294 + else
295 + return body
296 + end
297 +end
298 +
299 +function getMessageUrl(whatsAppMessage)
300 + local auth = SID..':'..Token
301 + local url = "https://api.twilio.com/2010-04-01/Accounts/"..SID.."/Messages"
302 + --local reqMess = "message="..twilioMessage
303 + local reqMess = requestBodySplice(whatsAppMessage, twilioPhoneNumber, receiverPhoneNumber)
304 + local headers =
305 + {
306 + ["Authorization"] = "Basic "..encodingBase64(auth),
307 + ["Content-Type"] = "application/x-www-form-urlencoded",
308 + ["Content-Length"] = #reqMess
309 + }
310 +
311 + print("Get the link:"..url)
312 + getHttpsUrl(url, headers, reqMess)
313 +end
314 +
315 +
316 +
317 +function Twilio.main()
318 + --dosomething
319 + --local auth = SID..':'..Token
320 + --print(requestBodySplice("HelloWorld", twilioPhoneNumber, receiverPhoneNumber))
321 + --print(encodingBase64(auth))
322 + local bitValue = addr_getbit("@testBit");
323 + local message = ''
324 + print("b=="..bitValue)
325 + if bitValue == 1 and bitValue ~= tempBit then
326 + message = 'Alarm V-Box triggered, the output is '.. bitValue
327 + getMessageUrl(message)
328 + print("Notification pushed of triggering alarm,"..bitValue)
329 + elseif bitValue == 0 and bitValue ~= tempBit then
330 + message = 'Alarm V-Box dismissed, the output is '.. bitValue
331 + getMessageUrl(message)
332 + print("Notification pushed of dismissing alarm,"..bitValue)
333 + end
334 + tempBit = bitValue----Prevent monitoring values from continuous being sent to the platform
335 +
336 + local wordValue = addr_getword("@testWord")
337 + print("w=="..wordValue)
338 + --dosomething
339 + if wordValue >= 100 and wordValue ~= tempWord and tempWord <= 100 then
340 + message = 'Alarm V-Box triggered, the temperature is '.. wordValue
341 + getMessageUrl(message)
342 + print("Notification pushed of triggering alarm,"..wordValue)
343 + elseif wordValue < 100 and wordValue ~= tempWord and tempWord >= 100 then
344 + message = 'Alarm V-Box dismissed, the temperature is '.. wordValue
345 + getMessageUrl(message)
346 + print("Notification pushed of dismissing alarm,"..wordValue)
347 + end
348 + tempWord = wordValue----Prevent monitoring values from continuous being sent to the platform
349 +end
350 +{{/code}}
351 +
352 +== **1.8 How to parse value from HTTP response body** ==
353 +
354 +This example use [[https:~~/~~/www.weatherapi.com/>>https://www.weatherapi.com/]] as example, to show how to parse value from HTTP response body. When we input the city name into address "@HDW5050":
355 +
356 +(% style="text-align:center" %)
357 +[[image:InputHTTPparameter.png]]
358 +
359 +Then the response body would be like as following:
360 +
361 +{{code language="json"}}
362 +{
363 + "location": {
364 + "name": "Madrid",
365 + "region": "Madrid",
366 + "country": "Spain",
367 + "lat": 40.4,
368 + "lon": -3.68,
369 + "tz_id": "Europe/Madrid",
370 + "localtime_epoch": 1669022636,
371 + "localtime": "2022-11-21 10:23"
372 + },
373 + "current": {
374 + "last_updated_epoch": 1669022100,
375 + "last_updated": "2022-11-21 10:15",
376 + "temp_c": 13.0,
377 + "temp_f": 55.4,
378 + "is_day": 1,
379 + "condition": {
380 + "text": "Partly cloudy",
381 + "icon": "//cdn.weatherapi.com/weather/64x64/day/116.png",
382 + "code": 1003
383 + },
384 + "wind_mph": 11.9,
385 + "wind_kph": 19.1,
386 + "wind_degree": 210,
387 + "wind_dir": "SSW",
388 + "pressure_mb": 1015.0,
389 + "pressure_in": 29.97,
390 + "precip_mm": 0.0,
391 + "precip_in": 0.0,
392 + "humidity": 88,
393 + "cloud": 75,
394 + "feelslike_c": 10.8,
395 + "feelslike_f": 51.4,
396 + "vis_km": 10.0,
397 + "vis_miles": 6.0,
398 + "uv": 3.0,
399 + "gust_mph": 22.1,
400 + "gust_kph": 35.6
401 + }
402 +}
403 +{{/code}}
404 +
405 +(% class="wikigeneratedid" %)
406 +So we decode json into lua object to assign the value into addresses HDW6060(temperature), HDW7070(humidity), the code example like follows:
407 +
408 +{{code language="lua"}}
409 +local APIkey = '70faaecf926b4341b1974006221711'
410 +
411 +
412 +local http = require("socket.http")
413 +local json = require("json")
414 +
415 +-- Send http.get request and return response result
416 +function getHttpsUrl(url)
417 + local result_table, code, headers, status = http.request(url)
418 + print("code:"..code)
419 + if code~= 200 then
420 + return
421 + else
422 + return result_table
423 + end
424 +end
425 +
426 +function sendAPI(key, city)
427 + local url = "http://api.weatherapi.com/v1/current.json?key="..key.."&q="..city.."&aqi=no"
428 + --local url = 'http://v-box.net'
429 + --local url = 'https://www.google.com/'
430 + --http://api.weatherapi.com/v1/current.json?key=70faaecf926b4341b1974006221711&q=Barcelona&aqi=no
431 + print("Get the link:"..url)
432 + local body = getHttpsUrl(url)
433 + --print(body)
434 + local jsonBody = json.decode(body)
435 + --print(jsonBody["current"]["temp_c"])
436 + --print(type(jsonBody["current"]["temp_c"]))
437 + --print(type(jsonBody["current"]["humidity"]))
438 + addr_setfloat("@HDW6060", jsonBody["current"]["temp_c"])
439 + addr_setword("@HDW7070", jsonBody["current"]["humidity"])
440 +end
441 +
442 +
443 +function Weather.main()
444 + local cityName = addr_getstring("@HDW5050",6)
445 + print("cityName: "..cityName)
446 + sendAPI(APIkey, cityName)
447 +end
448 +{{/code}}
449 +
139 139  = **2 V-Box connect with third part server** =
140 140  
141 141  V-Box have two mode.One is for V-Net,User need to use WECON server to store data.We call this V-NET platform.
... ... @@ -154,157 +154,273 @@
154 154  
155 155  (% class="mark" %)2.If your server requires SSL certificate to log in,please use OpenCloud.Because only OpenCloud platform can support to upload certificate
156 156  
157 -== **2.1 V-Box connect with customer server:grouprobotinfo.com** ==
468 +(% class="wikigeneratedid" %)
469 +**✎Note: **Before program the script of MQTT, please make sure the server(MQTT broker) can be connected through MQTT Client tool.
158 158  
159 -This demo does not use SSL certification. Script is as below
471 +(% class="wikigeneratedid" %)
472 +Tool link: **[[MQTT.fx>>http://mqttfx.jensd.de/index.php/download]]**
160 160  
161 -Demo1:
474 +== **2.1 V-Box connect with test server(General Example)** ==
162 162  
163 163  {{code language="lua"}}
164 --- Meta class
165 ---main
166 -function mq.main()
167 - if not mq.m then
168 -  local err = ""
477 +--MQTT configuration table
478 +local MQTT_CFG={}
479 +MQTT_CFG.username = "weconsupport"
480 +MQTT_CFG.password = "123456"
481 +MQTT_CFG.netway = 0
482 +MQTT_CFG.keepalive = 60
483 +MQTT_CFG.cleansession = 1
484 +--TCP URL
485 +MQTT_URL = "tcp://mq.tongxinmao.com:1883"
486 +--Client ID
487 +MQTT_CLIENT_ID = "V-BOXH-AG"
169 169  
170 -  mq.m, err = mqtt.create("tcp://grouprobotinfo.com:1883", "ClienID")  -- create connection
171 -  if mq.m then
172 -   mq.config = {
173 -    username = "",-- ID
174 -    password = "",-- password
175 -    netway = 1, -- Ethernet connection, WIFI=1
176 -    -- keepalive = 100, -- Optional, set the connection heartbeat interval for 100 seconds.
177 -    -- cleansession = 0, -- Optional, keep session
178 -   }
179 -   mq.m:on("message", function(topic, msg) -- Register for receiving message callbacks
180 -    local str = string.format("%s:%s", topic, msg)
181 -    -- print("mqtt msg:", str) -- Print out the received topics and content
182 -   end
183 -   )
184 -   mq.m:on("offline", function (cause) -- Register for lost connection callbacks
185 -    -- addr_setstring("@xxx", "cause"..(cause or " got nil"))
186 -   end)
187 -   mq.m:on("arrived", function() -- Registration for sending messages to callbacks 
188 -    print("msg arrived")
189 -   end)
190 -  else
191 -   print("mqtt create failed:", err) -- Create object failed
192 -  end
193 - else
194 -  if mq.m:isconnected() then -- If online, post a message
195 -     local phaseStatus ="unknow"
196 -     if addr_getbit("@Standby")== 1 then
197 -         phaseStatus = "Standby"
198 -     elseif addr_getbit("@Pre-Freeze")==1 then
199 -         phaseStatus= "Pre-Freeze"
200 -     elseif addr_getbit("@Prepare")==1 then
201 -         phaseStatus ="Prepare"
202 -     elseif addr_getbit("@Primary Dry")==1 then
203 -         phaseStatus = "Primary dry"
204 -     elseif addr_getbit("@Secondary Dry")==1 then
205 -         phaseStatus = "Secondary Dry"
206 -     end
207 ---   print(addr_getbit("@Primary Dry"))
208 --------------------------------------------------------------------------------------------------------------------------
209 -     local activating ="unknow"
210 -     if addr_getbit("@Compressor")==1 then
211 -         activating = ",".."Compressor"
212 -     end
213 -     if addr_getbit("@Silicone Pump")==1 then
214 -         activating = activating..",".."Silicone Pump"
215 -     end
216 -     if addr_getbit("@Vacuum Pump")==1 then
217 -         activating = activating..",".."Vacuum Pump"
218 -     end
219 -     if addr_getbit("@Root Pump")==1 then
220 -         activating = activating..",".."Root Pump"
221 -     end
222 -     if addr_getbit("@Heater")==1 then
223 -         activating = activating..",".."Heater"
224 -     end
225 -     if addr_getbit("@Valve Silicone")==1 then
226 -         activating = activating..",".."Valve Silicone"
227 -     end
228 -     if addr_getbit("@Valve Ice Condenser")==1 then
229 -         activating = activating..",".."Valve Ice Condenser"
230 -     end
231 -     if addr_getbit("@Valve Vacuum Pump")==1 then
232 -         activating = activating..",".."Valve Vacuum Pump"
233 -     end
234 -     local pr_activating =string.sub(activating,2)
235 -    --  print(pr_activating)  
489 +--Generate UUID
490 +function uuid()
491 + local seed = {'e','1','2','3','4','5','6','7','8','9','a','b','c','d','e','f'}
492 + local tb = {}
493 + for i=1, 32 do
494 + table.insert(tb, seed[math.random(1,16)])
495 + end
496 + local sid=table.concat(tb)
497 + return string.format('%s',
498 + string.sub(sid,1,32)
499 + )
500 +end
236 236  
237 237  
503 +--Topic name to subscribed
504 +local SUBSCRIBE_TOPIC = 'testtopic/test/no1/123456'
238 238  
239 -     local status_text ="unknow"
240 -     if addr_getbit("@Status Run")==1 then
241 -         status_text = "RUNNING"
242 -     else
243 -         status_text = "STOP"
244 -     end
245 --------------------------------------------------------------------------------------------------------------------------      
506 +--Topic name to be published
507 +local PUBLISH_TOPIC = 'testtopic/test/no1/7890'
246 246  
247 -     local js =  {type="status",
248 -                  mc_name ="FD300",
249 -                  status=status_text,
250 -                  elapsed_time={
251 -                                hour=addr_getword("@Elapsed Time (Hour)"),
252 -                                min=addr_getword("@Elapsed Time (Minute)"),
253 -                                sec=addr_getword("@Elapsed Time (Second)")
254 -                                },
255 -                   phase = phaseStatus,
256 -                   step = addr_getword("@Step"),
257 -                   activating_output = pr_activating,
258 -                   sv=addr_getshort("@SV Silicone")/10,
259 -                   pv=addr_getshort("@PV Silicone")/10,
260 -                   product1=addr_getshort("@Product 1")/10,
261 261  
262 -                   product2=addr_getshort("@Product 2")/10,
263 -                   product3=addr_getshort("@Product 3")/10,
264 -                   product4=addr_getshort("@Product 4")/10,
265 -                   ice1=addr_getshort("@Ice condenser 1")/10,
266 -                   ice2=addr_getshort("@Ice condenser 2")/10,
267 -                   vacuum=addr_getfloat("@Vacuum")
510 +--real time
511 +local LAST_TIME = 0
268 268  
269 -                }
270 -     local jsAlarm = {  HPC = addr_getbit("@B_25395#W0.00"),
271 -                        ODPC = addr_getbit("@B_25395#W0.01"),
272 -                        MTPC=addr_getbit("@B_25395#W0.02"),
273 -                        HTT = addr_getbit("@B_25395#W1.03"),
274 -                        CPC = addr_getbit("@B_25395#W0.08"),
275 -                        CPSP =addr_getbit("@B_25395#W1.00"),
276 -                        CPVP =addr_getbit("@B_25395#W0.10"),
277 -                        CPRP =addr_getbit("@B_25395#W0.11"),
278 -                        HP =addr_getbit("@B_25395#W1.01"),
279 -                        PP= addr_getbit("@B_25395#W1.02"),
280 -                        PO=addr_getbit("@B_25395#W0.07"),
281 -                        FSE=addr_getbit("@B_25395#W2.04"),
282 -                        AVVSVV=addr_getbit("@B_25395#W1.12"),
283 -                        ICHT=addr_getbit("@B_25395#W3.06")
284 284  
285 -                }
514 +--initialize mqtt
515 +function mqtt_init()
516 + print(string.format("mqtt init mqtt_url:%s mqtt_clientid:%s", MQTT_URL, MQTT_CLIENT_ID))
517 + g_mq, err = mqtt.create(MQTT_URL, MQTT_CLIENT_ID) -- create mqtt object,and declare it as a global variable
518 + if g_mq then
519 + g_mq:on("message", mqtt_msg_callback) -- Register a callback for receiving messages
520 + print("mqtt init success")
521 + else
522 + print("mqtt init failed:", err)
523 + end
524 +end
286 286  
287 -    -- ("@B_25395#CIO1.02")
288 -     mq.m:publish("mqtt-v-box-epsilon-fd300", json.encode(js) , 0, 0)
289 -     mq.m:publish("mqtt-v-box-epsilon-alarm-fd300", json.encode(jsAlarm) , 0, 0)
290 -  else
291 -   local stat, err = mq.m:connect(mq.config) -- connection
292 -   if stat == nil then --Determine whether to connect
293 -    print("mqtt connect failed:", err)
294 -    return -- Connection failed, return directly
295 -   end
296 -   mq.m:subscribe("mqtt-v-box-epsilon", 0)-- Subscribe to topics
526 +-- connect to mqtt
527 +function mqtt_connect()
528 + print("mqtt connecting...")
529 + local stat, err = g_mq:connect(MQTT_CFG)
530 + if stat == nil then
531 + print("mqtt connect failed:", err)
532 + return
533 + else
534 + print("mqtt connected")
535 + end
536 + g_mq:subscribe(SUBSCRIBE_TOPIC, 0)
537 +end
297 297  
298 -  end
299 -  -- mq.m:unsubscribe("stc/test")
300 -  -- mq.m:disconnect() -- close matt
301 -  -- mq.m:close() -- close clase
302 - end
539 +-- Received message callback function
540 +function mqtt_msg_callback(topic, msg)
541 + print("topic:", topic)
542 + print("msg:", msg)
543 + local objMsg = json.decode(msg)
544 + local water = objMsg.data.waterlevel
545 + local temp = objMsg.data.temperature
546 + addr_setword("@HDW20",water)
547 + addr_setword("@HDW10",temp)
303 303  end
549 +
550 +--Send data (data upload to platform and encapsulate it with custom functions)
551 +function send_data()
552 + local pub_data = {
553 + timestamp = os.time(),
554 + messageId = 1,
555 + event = 'test_data',
556 + mfrs = 'V-Box',
557 + data = {
558 + id = uuid(),
559 + waterlevel = addr_getword("@HDW10"),
560 + temperature = addr_getword("@HDW20")
561 + }
562 + }
563 + return g_mq:publish(PUBLISH_TOPIC, json.encode(pub_data), 0, 0)
564 +end
565 +
566 +
567 +--main function fixed timed execution
568 +function MQTT.main()
569 + --dosomething
570 + print(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " main start")
571 + --determine the mqtt object whether exist
572 + if g_mq then
573 + --determine the mqtt object whether has been connected or not
574 + if g_mq:isconnected() then
575 + send_data()
576 + else
577 + --if exceed 20 sec not connect, reconnect once
578 + if os.time() - LAST_TIME > 20 then
579 + LAST_TIME = os.time()
580 + --connect to mqtt or reconnect
581 + mqtt_connect()
582 + end
583 + end
584 + else
585 + --mqtt object does not exist so create new one
586 + mqtt_init()
587 + end
588 + print(os.date("%Y-%m-%d %H:%M %S", os.time()) .. " main end")
589 +end
304 304  {{/code}}
305 305  
306 -== **2.2 V-Box connect with Azure platform** ==
592 +== **2.2 V-Box connect with customer server:grouprobotinfo.com** ==
307 307  
594 +This demo does not use SSL certification. Script is as below
595 +
596 +Demo1:
597 +
598 +{{code language="lua"}}
599 +-- Meta class
600 +--main
601 +function mq.main()
602 + if not mq.m then
603 + local err = ""
604 +
605 + mq.m, err = mqtt.create("tcp://grouprobotinfo.com:1883", "ClienID") -- create connection
606 + if mq.m then
607 + mq.config = {
608 + username = "",-- ID
609 + password = "",-- password
610 + netway = 1, -- Ethernet connection, WIFI=1
611 + -- keepalive = 100, -- Optional, set the connection heartbeat interval for 100 seconds.
612 + -- cleansession = 0, -- Optional, keep session
613 + }
614 + mq.m:on("message", function(topic, msg) -- Register for receiving message callbacks
615 + local str = string.format("%s:%s", topic, msg)
616 + -- print("mqtt msg:", str) -- Print out the received topics and content
617 + end)
618 + mq.m:on("offline", function (cause) -- Register for lost connection callbacks
619 + -- addr_setstring("@xxx", "cause"..(cause or " got nil"))
620 + end)
621 + mq.m:on("arrived", function() -- Registration for sending messages to callbacks
622 + print("msg arrived")
623 + end)
624 + else
625 + print("mqtt create failed:", err) -- Create object failed
626 + end
627 + else
628 + if mq.m:isconnected() then -- If online, post a message
629 + local phaseStatus ="unknow"
630 + if addr_getbit("@Standby")== 1 then
631 + phaseStatus = "Standby"
632 + elseif addr_getbit("@Pre-Freeze")==1 then
633 + phaseStatus= "Pre-Freeze"
634 + elseif addr_getbit("@Prepare")==1 then
635 + phaseStatus ="Prepare"
636 + elseif addr_getbit("@Primary Dry")==1 then
637 + phaseStatus = "Primary dry"
638 + elseif addr_getbit("@Secondary Dry")==1 then
639 + phaseStatus = "Secondary Dry"
640 + end
641 + --print(addr_getbit("@Primary Dry"))
642 +-------------------------------------------------------------------------------------------------------------------------
643 + local activating ="unknow"
644 + if addr_getbit("@Compressor")==1 then
645 + activating = ",".."Compressor"
646 + end
647 + if addr_getbit("@Silicone Pump")==1 then
648 + activating = activating..",".."Silicone Pump"
649 + end
650 + if addr_getbit("@Vacuum Pump")==1 then
651 + activating = activating..",".."Vacuum Pump"
652 + end
653 + if addr_getbit("@Root Pump")==1 then
654 + activating = activating..",".."Root Pump"
655 + end
656 + if addr_getbit("@Heater")==1 then
657 + activating = activating..",".."Heater"
658 + end
659 + if addr_getbit("@Valve Silicone")==1 then
660 + activating = activating..",".."Valve Silicone"
661 + end
662 + if addr_getbit("@Valve Ice Condenser")==1 then
663 + activating = activating..",".."Valve Ice Condenser"
664 + end
665 + if addr_getbit("@Valve Vacuum Pump")==1 then
666 + activating = activating..",".."Valve Vacuum Pump"
667 + end
668 + local pr_activating =string.sub(activating,2)
669 + -- print(pr_activating)
670 + local status_text ="unknow"
671 + if addr_getbit("@Status Run")==1 then
672 + status_text = "RUNNING"
673 + else
674 + status_text = "STOP"
675 + end
676 +-------------------------------------------------------------------------------------------------------------------------
677 + local js = {type="status",
678 + mc_name ="FD300",
679 + status=status_text,
680 + elapsed_time={
681 + hour=addr_getword("@Elapsed Time (Hour)"),
682 + min=addr_getword("@Elapsed Time (Minute)"),
683 + sec=addr_getword("@Elapsed Time (Second)")
684 + },
685 + phase = phaseStatus,
686 + step = addr_getword("@Step"),
687 + activating_output = pr_activating,
688 + sv=addr_getshort("@SV Silicone")/10,
689 + pv=addr_getshort("@PV Silicone")/10,
690 + product1=addr_getshort("@Product 1")/10,
691 +
692 + product2=addr_getshort("@Product 2")/10,
693 + product3=addr_getshort("@Product 3")/10,
694 + product4=addr_getshort("@Product 4")/10,
695 + ice1=addr_getshort("@Ice condenser 1")/10,
696 + ice2=addr_getshort("@Ice condenser 2")/10,
697 + vacuum=addr_getfloat("@Vacuum")
698 + }
699 + local jsAlarm = { HPC = addr_getbit("@B_25395#W0.00"),
700 + ODPC = addr_getbit("@B_25395#W0.01"),
701 + MTPC=addr_getbit("@B_25395#W0.02"),
702 + HTT = addr_getbit("@B_25395#W1.03"),
703 + CPC = addr_getbit("@B_25395#W0.08"),
704 + CPSP =addr_getbit("@B_25395#W1.00"),
705 + CPVP =addr_getbit("@B_25395#W0.10"),
706 + CPRP =addr_getbit("@B_25395#W0.11"),
707 + HP =addr_getbit("@B_25395#W1.01"),
708 + PP= addr_getbit("@B_25395#W1.02"),
709 + PO=addr_getbit("@B_25395#W0.07"),
710 + FSE=addr_getbit("@B_25395#W2.04"),
711 + AVVSVV=addr_getbit("@B_25395#W1.12"),
712 + ICHT=addr_getbit("@B_25395#W3.06")
713 + }
714 + -- ("@B_25395#CIO1.02")
715 + mq.m:publish("mqtt-v-box-epsilon-fd300", json.encode(js) , 0, 0)
716 + mq.m:publish("mqtt-v-box-epsilon-alarm-fd300", json.encode(jsAlarm) , 0, 0)
717 + else
718 + local stat, err = mq.m:connect(mq.config) -- connection
719 + if stat == nil then --Determine whether to connect
720 + print("mqtt connect failed:", err)
721 + return -- Connection failed, return directly
722 + end
723 + mq.m:subscribe("mqtt-v-box-epsilon", 0)-- Subscribe to topics
724 +
725 + end
726 + -- mq.m:unsubscribe("stc/test")
727 + -- mq.m:disconnect() -- close matt
728 + -- mq.m:close() -- close clase
729 + end
730 +end
731 +{{/code}}
732 +
733 +== **2.3 V-Box connect with Azure platform** ==
734 +
308 308  In this demo,V-Box connects with Azure by SSL certification.
309 309  
310 310  Video link: [[https:~~/~~/youtu.be/cdI6rIQcpMY?list=PL_Bpnb2RgaksCic9HCcVAZhU9sYwCRKzW>>https://youtu.be/cdI6rIQcpMY?list=PL_Bpnb2RgaksCic9HCcVAZhU9sYwCRKzW]]
... ... @@ -434,7 +434,7 @@
434 434  end
435 435  )))
436 436  
437 -== **2.3 How to configure the Huawei platform?（✎Note: Huawei IOT DA function is only in China area.If you want this function,you need to use chinese mobile to register）** ==
864 +== **2.4 How to configure the Huawei platform?（✎Note: Huawei IOT DA function is only in China area.If you want this function,you need to use chinese mobile to register）** ==
438 438  
439 439  1.Register a account: [[https:~~/~~/www.huaweicloud.com/intl/en-us/s/JUlPVERNJQ>>https://www.huaweicloud.com/intl/en-us/s/JUlPVERNJQ]]
440 440  
... ... @@ -583,7 +583,7 @@
583 583  (% style="text-align:center" %)
584 584  [[image:1624441186851-536.png||height="434" width="700" class="img-thumbnail"]]
585 585  
586 -== **2.4 V-Box connect with Huawei platform** ==
1013 +== **2.5 V-Box connect with Huawei platform** ==
587 587  
588 588  In this demo,V-Box connects with Huawei by SSL certification.
589 589  
... ... @@ -704,7 +704,7 @@
704 704  (% style="text-align:center" %)
705 705  [[image:1624506666650-161.png||height="547" width="1000" class="img-thumbnail"]]
706 706  
707 -== **2.5 V-Box connect with AWS platform** ==
1134 +== **2.6 V-Box connect with AWS platform** ==
708 708  
709 709  === **Log in AWS** ===
710 710  
InputHTTPparameter.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +17.9 KB
Content