1.1 V-Box Configuration

①Access V-Net 2.0 software and click on the [Offline Mode] (you can also log in with your V-Net 2.0 account if you have one), as shown in the figure below.

②Click on the [V-Box] button in the upper left corner ，choose [PC to box connection mode]: (USB connection or Ethernet connection. If you use Ethernet connection, you need to know the IP address of the device), after [Detected XX device] appears on the right, click on the [Upgrade Firmware].

③After the firmware is successfully upgraded, and [Detected XX device] appears on the right again, then click on the [Configure network], as shown in the figure below.

④Configure the "Networking configuration" and "Box access Password" in [Configuration network], then click on the [Download], and wait for the device to be configured successfully and restart, as shown in the figure below.

⑤After the V-Box environment is prepared and the platform account registration is completed, you can log in the V-Net 2.0 and perform device binding operations. 

1.2 HMI Configuration

①Open the HMI software PIStudio, create or open a project, and click on the [Project] → [Cloud], as shown in the figure below.

②[Server]: Select the server corresponding to the account，enter the password(the default password is 888888), then click Confirm, as shown in the figure below.

③Click on the [Compile], after the project is compiled, click on the [Download], In the pop-up download tool window, choose: Ethernet (USB connection or Ethernet connection. If you use Ethernet connection, you need to know the IP address of the device), enter the IP address of the HMI, click [Download], and wait for the project download to complete, as shown in the figure below.

 ④After the HMI environment is prepared and the platform account registration is completed, click the [Machine Code] button to get machine code to bind the HMI in V-Net 2.0.