Skip to Content

11 VB connect Permanent magnet synchronous motor

Last modified by xingzhi lin on 2026/04/24 09:58

✎Note: The inverter needs to download the firmware version first, after the firmware version download is completed, the inverter can only connect to permanent magnet synchronous motors, can't connect to asynchronous motors, and can only use the svc mode (F0.00=0), the maximum frequency can't be more than 300HZ.

Motor self-learning

  • F0.00=0
  • F0.01=0
  • F2.00=2
  • F2.01-F2.05(Check the motor nameplate)
  • F2.11=13 synchronous motor stationary tuning (calculate the reverse potential), TUNE appears to press RUN, wait for the self-learning is completed.
  • Check the parameters F2.16-F2.20.