Skip to Content

Changes for page 09 Function code

Last modified by Iris on 2025/11/17 14:59
From version 10.1
edited by Iris
on 2025/11/14 09:43
Change comment: There is no comment for this version
To version 11.1
edited by Iris
on 2025/11/14 15:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1222,7 +1222,7 @@
1222 1222  
1223 1223  When set to automatic torque boost F4.01=0, the torque boost works. This parameter is used to set the gain of automatic torque boost and the filtering time.
1224 1224  
1225 -|(% rowspan="2" style="text-align:center" %)F4.19|(% style="text-align:center" %)EVF slip compensation gain|(% style="text-align:center" %)Factory default|100.0%
1225 +|(% rowspan="2" style="text-align:center" %)F4.19|(% style="text-align:center" %)EVF slip compensation gain|(% style="text-align:center" %)Factory default|0.0%
1226 1226  |(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 500.0%
1227 1227  |(% rowspan="2" style="text-align:center" %)F4.20|(% style="text-align:center" %)EVF slip compensation filtering time|(% style="text-align:center" %)Factory default|100ms
1228 1228  |(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)1 to 1000ms
... ... @@ -1229,9 +1229,8 @@
1229 1229  
1230 1230  This function can make the output frequency of the inverter automatically adjust in the Setting range with the change of the motor load; Dynamically compensates the slip frequency of the motor, so that the motor basically maintains a constant speed, and effectively reduces the influence of load changes on the motor speed.
1231 1231  
1232 -
1233 -|(% rowspan="2" %)F4.21|Automatic energy saving selection|Factory default|50
1234 -|Setting range|(% colspan="2" %)(((
1232 +|(% rowspan="2" style="text-align:center" %)F4.21|(% style="text-align:center" %)Automatic energy saving selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50
1233 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:left" %)(((
1235 1235  Units place: 0 is off, 1 is on
1236 1236  
1237 1237  Tens place: Frequency change exit depth
... ... @@ -1240,24 +1240,22 @@
1240 1240  
1241 1241  Thousand place:
1242 1242  )))
1243 -|(% rowspan="2" %)F4.22|Lower limit frequency of energy saving operation|Factory default|25.0%
1244 -|Setting range|(% colspan="2" %)0.0 to 100.0%
1245 -|(% rowspan="2" %)F4.23|Energy saving and pressure reduction time|Factory default|10.0s
1246 -|Setting range|(% colspan="2" %)0.1 to 5000.0s
1247 -|(% rowspan="2" %)F4.24|Lower limit of energy saving and pressure reduction|Factory default|30.0%
1248 -|Setting range|(% colspan="2" %)20.0 to 100.0%
1249 -|(% rowspan="2" %)F4.25|Energy saving and pressure reduction rate|Factory default|50V/s
1250 -|Setting range|(% colspan="2" %)1 to 1000V/s
1251 -|(% rowspan="2" %)F4.26|Voltage regulated proportional gain|Factory default|20
1252 -|Setting range|(% colspan="2" %)0 to 100
1253 -|(% rowspan="2" %)F4.27|Voltage regulation integral gain|Factory default|20
1254 -|Setting range|(% colspan="2" %)0 to 100
1242 +|(% rowspan="2" style="text-align:center" %)F4.22|(% style="text-align:center" %)Lower limit frequency of energy saving operation|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)25.0%
1243 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 100.0%
1244 +|(% rowspan="2" style="text-align:center" %)F4.23|(% style="text-align:center" %)Energy saving and pressure reduction time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.0s
1245 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1 to 5000.0s
1246 +|(% rowspan="2" style="text-align:center" %)F4.24|(% style="text-align:center" %)Lower limit of energy saving and pressure reduction|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)30.0%
1247 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)20.0 to 100.0%
1248 +|(% rowspan="2" style="text-align:center" %)F4.25|(% style="text-align:center" %)Energy saving and pressure reduction rate|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50V/s
1249 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)1 to 1000V/s
1250 +|(% rowspan="2" style="text-align:center" %)F4.26|(% style="text-align:center" %)Voltage regulated proportional gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20
1251 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 100
1252 +|(% rowspan="2" style="text-align:center" %)F4.27|(% style="text-align:center" %)Voltage regulation integral gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20
1253 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 100
1255 1255  
1256 -
1257 -
1258 1258  Automatic energy saving options:
1259 1259  
1260 -0: No operation is performed
1257 +0: No operation
1261 1261  
1262 1262  1: Automatic energy-saving operation
1263 1263  
... ... @@ -1275,28 +1275,28 @@
1275 1275  
1276 1276  Voltage regulation integral gain: Ki parameter when PI control automatically saves energy.
1277 1277  
1278 -|(% rowspan="2" %)F4.30|Stabilizer proportional gain|Factory default|10.0%
1279 -|Setting range|(% colspan="2" %)0.1% to 100.0%
1280 -|(% rowspan="2" %)F4.31|Stabilizer filtering time|Factory default|50ms
1281 -|Setting range|(% colspan="2" %)1ms to 1000ms
1275 +|(% rowspan="2" style="text-align:center" %)F4.30|(% style="text-align:center" %)Stabilizer proportional gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.0%
1276 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1% to 100.0%
1277 +|(% rowspan="2" style="text-align:center" %)F4.31|(% style="text-align:center" %)Stabilizer filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50ms
1278 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)1ms to 1000ms
1282 1282  
1283 1283  Parameters of the frequency stabilizer When the synchronous motor with VVC is running. If there are unstable fluctuations in current and speed, adjusting F4.30 and F4.31 can improve and eliminate them.
1284 1284  
1285 -|(% rowspan="2" %)F4.32|Low frequency current lift|Factory default|100.0%
1286 -|Setting range|(% colspan="2" %)0.0% to 200.0%
1287 -|(% rowspan="2" %)F4.33|Low frequency boost maintenance frequency|Factory default|10.0%
1288 -|Setting range|(% colspan="2" %)0 to 100.0%
1289 -|(% rowspan="2" %)F4.34|Low frequency current boosts the cutoff frequency|Factory default|30.0%
1290 -|Setting range|(% colspan="2" %)0 to 100.0%
1282 +|(% rowspan="2" style="text-align:center" %)F4.32|(% style="text-align:center" %)Low frequency current lift|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
1283 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 200.0%
1284 +|(% rowspan="2" style="text-align:center" %)F4.33|(% style="text-align:center" %)Low frequency boost maintenance frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.0%
1285 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 100.0%
1286 +|(% rowspan="2" style="text-align:center" %)F4.34|(% style="text-align:center" %)Low frequency current boosts the cutoff frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)30.0%
1287 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 100.0%
1291 1291  
1292 1292  Amplitude of the boost of the current when the synchronizer VVC is operating at low frequency. VVC has poor control of low frequency torque, so the output current will be increased at low frequency to obtain a larger starting torque. The adjustment of F4.32 can improve the motor starting torque and low-frequency carrying capacity, but the low-frequency running current increases as above.
1293 1293  
1294 1294  When the frequency is lower than the maintenance frequency, the lifting current will be maintained to the F4.32 setting value. When the frequency is higher than the cut-off frequency, the lifting current drops to 0. When the frequency is between the two, the lift current boundary is between 0 and F4.32.
1295 1295  
1296 -|(% rowspan="2" %)F4.35|D-axis current gain|Factory default|2.0
1297 -|Setting range|(% colspan="2" %)0.0 to 100.0
1298 -|(% rowspan="2" %)F4.36|Q-axis current gain|Factory default|2.0
1299 -|Setting range|(% colspan="2" %)0.0 to 100.0
1293 +|(% rowspan="2" style="text-align:center" %)F4.35|(% style="text-align:center" %)D-axis current gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.0
1294 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 100.0
1295 +|(% rowspan="2" style="text-align:center" %)F4.36|(% style="text-align:center" %)Q-axis current gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.0
1296 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 100.0
1300 1300  
1301 1301  When the synchronous motor with VVC is controlled, the D-axis voltage adjusts the gain.
1302 1302  
... ... @@ -1303,36 +1303,29 @@
1303 1303  When the synchronous motor with VVC is controlled, the Q-axis voltage adjusts the gain.
1304 1304  
1305 1305  
1306 -|(% rowspan="2" %)F4.37|Magnetic flux set strength|Factory default|30.0%
1307 -|Setting range|(% colspan="2" %)0 to 500%
1308 -|(% rowspan="2" %)F4.38|Magnetic flux control proportional gain|Factory default|500
1309 -|Setting range|(% colspan="2" %)0 to 9999
1310 -|(% rowspan="2" %)F4.39|Magnetic flux controls the integral gain|Factory default|500
1311 -|Setting range|(% colspan="2" %)0 to 9999
1303 +|(% rowspan="2" style="text-align:center" %)F4.37|(% style="text-align:center" %)Magnetic flux set strength|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)30.0%
1304 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 500%
1305 +|(% rowspan="2" style="text-align:center" %)F4.38|(% style="text-align:center" %)Magnetic flux control proportional gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)500
1306 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 9999
1307 +|(% rowspan="2" style="text-align:center" %)F4.39|(% style="text-align:center" %)Magnetic flux controls the integral gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)500
1308 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 9999
1312 1312  
1313 1313  Synchronous motor with VVC control is a kind of control mode based on reactive power stabilization. This set of parameters is used to set the amount of reactive power, and the gain and integral of the reactive power controller.
1314 1314  
1312 +|(% rowspan="2" style="text-align:center" %)F4.40|(% style="text-align:center" %)DC pull in time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1000ms
1313 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)1ms to 9999ms
1315 1315  
1316 -|(% rowspan="2" %)F4.40|DC pull in time|Factory default|1000ms
1317 -|Setting range|(% colspan="2" %)1ms to 9999ms
1318 -
1319 -
1320 -
1321 1321  When the synchronous motor with VVC is started, the permanent magnet needs to be pulled to the set position. This parameter is used to set the pulling time. During this time, the inverter outputs DC.
1322 1322  
1317 +|(% rowspan="2" style="text-align:center" %)F4.41|(% style="text-align:center" %)Startup frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)3.00Hz
1318 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00Hz to 99.00Hz
1319 +|(% rowspan="2" style="text-align:center" %)F4.42|(% style="text-align:center" %)Startup frequency time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)3.0s
1320 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 999.0s
1323 1323  
1324 -|(% rowspan="2" %)F4.41|Startup frequency|Factory default|3.00Hz
1325 -|Setting range|(% colspan="2" %)0.00Hz to 99.00Hz
1326 -|(% rowspan="2" %)F4.42|Startup frequency time|Factory default|3.0s
1327 -|Setting range|(% colspan="2" %)0.0s to 999.0s
1328 -
1329 -
1330 -
1331 1331  To prevent VVC synchronous motor start out of step, the program control the motor to accelerate to a lower frequency for a period of time, this set of parameters is used to set the maintenance frequency and time, within the start frequency time, the motor will not accelerate.
1332 1332  
1333 -
1334 -|(% rowspan="2" %)F4.43|V/F Separate the output voltage source|Factory default|0
1335 -|Setting range|(% colspan="2" %)(((
1324 +|(% rowspan="2" style="text-align:center" %)F4.43|(% style="text-align:center" %)V/F Separate the output voltage source|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1325 +|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
1336 1336  0: function code F4.44 setting
1337 1337  
1338 1338  1: AI1 is set
... ... @@ -1370,26 +1370,26 @@
1370 1370  
1371 1371  8. Communication set. The voltage is set by the upper computer through communication (100% corresponding to the rated voltage of the motor).
1372 1372  
1373 -|(% rowspan="2" %)F4.44|V/F separation output voltage digital setting|Factory default|0
1374 -|Setting range|(% colspan="2" %)0.0% to 100.0%
1363 +|(% rowspan="2" style="text-align:center" %)F4.44|(% style="text-align:center" %)V/F separation output voltage digital setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1364 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 100.0%
1375 1375  
1376 1376  When the voltage source is set digitally, this value is directly used as the output voltage target value.
1377 1377  
1368 +|(% rowspan="2" style="text-align:center" %)F4.45|(% style="text-align:center" %)V/F separation voltage rise time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1.0
1369 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 1000.0s
1370 +|(% rowspan="2" style="text-align:center" %)F4.46|(% style="text-align:center" %)V/F separation voltage drop time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1.0
1371 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 1000.0s
1378 1378  
1379 -|(% rowspan="2" %)F4.45|V/F separation voltage rise time|Factory default|1.0
1380 -|Setting range|(% colspan="2" %)0.0 to 1000.0s
1381 -|(% rowspan="2" %)F4.46|V/F separation voltage drop time|Factory default|1.0
1382 -|Setting range|(% colspan="2" %)0.0 to 1000.0s
1373 +VF separation rise time refers to the time required for the output voltage to change from 0V to the rated voltage of the motor. As shown in Figure 9-4-3:
1383 1383  
1384 -VF separation rise time refers to the time required for the output voltage to change from 0V to the rated voltage of the motor.As shown in Figure 9-4-3:
1375 +(% style="text-align:center" %)
1376 +(((
1377 +(% style="display:inline-block" %)
1378 +[[Figure 9-4-3 V/F Separation diagram>>image:1763085846068-848.png]]
1379 +)))
1385 1385  
1386 -[[image:1763083956222-210.png]]
1387 -
1388 -Figure 9-4-3 V/F Separation diagram
1389 -
1390 -
1391 -|(% rowspan="2" %)F4.47|V/F separate stop mode|Factory default|0
1392 -|Setting range|(% colspan="2" %)(((
1381 +|(% rowspan="2" style="text-align:center" %)F4.47|(% style="text-align:center" %)V/F separate stop mode|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1382 +|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
1393 1393  0: The voltage/frequency simultaneously decreases to 0
1394 1394  
1395 1395  1: The frequency decreases after the voltage drops to 0
... ... @@ -1397,127 +1397,124 @@
1397 1397  
1398 1398  This parameter sets the way VF separation stops.
1399 1399  
1400 -F5 Input terminals
1390 +== F5 Input terminals ==
1401 1401  
1402 1402  DI5 to DI8 terminal function selection (Extension) : Standard two-channel extension DI.
1403 1403  
1404 -|F5.00|DI1 terminal function Select|Factory default|1
1405 -|F5.01|DI2 terminal function Select|Factory default|2
1406 -|F5.02|DI3 terminal function Select|Factory default|9
1407 -|F5.03|DI4 terminal function Select|Factory default|12
1408 -|F5.04|DI5 terminal function Select(expansion)|Factory default|0
1409 -|F5.05|DI6 terminal function Select(expansion)|Factory default|0
1410 -|F5.08|AI1 selects the DI terminal function|Factory default|0
1411 -|F5.09|AI2 selects the DI terminal function|Factory default|0
1394 +|(% style="text-align:center" %)F5.00|(% style="text-align:center" %)DI1 terminal function Select|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
1395 +|(% style="text-align:center" %)F5.01|(% style="text-align:center" %)DI2 terminal function Select|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2
1396 +|(% style="text-align:center" %)F5.02|(% style="text-align:center" %)DI3 terminal function Select|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)9
1397 +|(% style="text-align:center" %)F5.03|(% style="text-align:center" %)DI4 terminal function Select|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)12
1398 +|(% style="text-align:center" %)F5.04|(% style="text-align:center" %)DI5 terminal function Select(expansion)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1399 +|(% style="text-align:center" %)F5.05|(% style="text-align:center" %)DI6 terminal function Select(expansion)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1400 +|(% style="text-align:center" %)F5.08|(% style="text-align:center" %)AI1 selects the DI terminal function|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1401 +|(% style="text-align:center" %)F5.09|(% style="text-align:center" %)AI2 selects the DI terminal function|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1412 1412  
1413 1413  
1414 1414  
1415 1415  This parameter is used to set the corresponding function of the digital multifunction input terminal:
1416 1416  
1417 -|**Setting value**|**Function**|**Description**
1418 -|0|No function|The inverter does not operate even if there is a signal input. Unused terminals can be set to no function to prevent misaction.
1419 -|1|Forward running (FWD)|(% rowspan="2" %)The inverter does not operate even if there is a signal input. Unused terminals can be set to no function to prevent misaction.
1420 -|2|Reverse running (REV)
1421 -|3|Three-wire operation control|Use this terminal to determine that the inverter operating mode is three-wire control mode. For details, please refer to F5.16 three-wire control mode function code introduction.
1422 -|4|Forward jog (FJOG)|(% rowspan="2" %)FJOG is a forward jog, RJOG is a reverse jog.The jog frequency, acceleration and deceleration time refer to the detailed description of F8.00, F8.01, F8.02 function code.
1423 -|5|Reverse jog (RJOG)
1424 -|6|Terminal UP|(% rowspan="2" %)Modify the frequency increment and decrement instructions when the frequency is given by the external terminal. The set frequency can be adjusted up or down when the frequency source is set to a digital setting.
1425 -|7|Terminal DOWN
1426 -|8|Free parking|(((
1407 +(% style="margin-left:auto; margin-right:auto" %)
1408 +|=(% style="width: 140px;" %)**Setting value**|=(% style="width: 232px;" %)**Function**|=(% style="width: 378px;" %)**Description**
1409 +|=(% style="width: 140px;" %)0|(% style="text-align:center; width:232px" %)No function|(% style="width:378px" %)The inverter does not operate even if there is a signal input. Unused terminals can be set to no function to prevent misaction.
1410 +|=(% style="width: 140px;" %)1|(% style="text-align:center; width:232px" %)Forward running (FWD)|(% rowspan="2" style="width:378px" %)Control the inverter forward and reverse rotation through external terminals.
1411 +|=(% style="width: 140px;" %)2|(% style="text-align:center; width:232px" %)Reverse running (REV)
1412 +|=(% style="width: 140px;" %)3|(% style="text-align:center; width:232px" %)Three-wire operation control|(% style="width:378px" %)Use this terminal to determine that the inverter operating mode is three-wire control mode. For details, please refer to F5.16 three-wire control mode function code introduction.
1413 +|=(% style="width: 140px;" %)4|(% style="text-align:center; width:232px" %)Forward jog (FJOG)|(% rowspan="2" style="width:378px" %)FJOG is a forward jog, RJOG is a reverse jog.The jog frequency, acceleration and deceleration time refer to the detailed description of F8.00, F8.01, F8.02 function code.
1414 +|=(% style="width: 140px;" %)5|(% style="text-align:center; width:232px" %)Reverse jog (RJOG)
1415 +|=(% style="width: 140px;" %)6|(% style="text-align:center; width:232px" %)Terminal UP|(% rowspan="2" style="width:378px" %)Modify the frequency increment and decrement instructions when the frequency is given by the external terminal. The set frequency can be adjusted up or down when the frequency source is set to a digital setting.
1416 +|=(% style="width: 140px;" %)7|(% style="text-align:center; width:232px" %)Terminal DOWN
1417 +|=(% style="width: 140px;" %)8|(% style="text-align:center; width:232px" %)Free parking|(% style="width:378px" %)(((
1427 1427  The AC Drive blocks the output, the motor parking process is not controlled by the inverter. A method often used for loads of large inertia and where there is no requirement for stopping time.
1428 1428  
1429 1429  This method has the same meaning as the free parking mentioned in F1.10.
1430 1430  )))
1431 -|9|Reset fault (RESET)|External fault reset function. The function is the same as RESET key on the keyboard. Remote fault reset can be realized with this function.
1432 -|10|Operation pause|The inverter slows down and stops, but all operating parameters are memory state. Such as PLC parameters, pendulum parameters, PID parameters. After the signal disappears, the inverter will resume operation to the state before stopping.
1433 -|11|External fault normally open input|When the external fault signal is sent to the inverter, the inverter reports a fault and stops
1434 -|12|Multi-segment speed instruction terminal 1|(% rowspan="4" %)A total of 15 segment speeds can be set through the combination of the digital state of the four terminals. The detailed composition is shown in Table 1.
1435 -|13|Multi-segment speed instruction terminal 2
1436 -|14|Multi-segment speed instruction terminal 3
1437 -|15|Multi-segment speed instruction terminal 4
1438 -|16|Acceleration and deceleration time selection 1|(% rowspan="2" %)Selects four acceleration and deceleration times through the combination of the digital states of the two terminals. The detailed composition is shown in Schedule 2.
1439 -|17|Acceleration and deceleration time selection 2
1440 -|18|Frequency source Switching|(((
1422 +|=(% style="width: 140px;" %)9|(% style="text-align:center; width:232px" %)Reset fault (RESET)|(% style="width:378px" %)External fault reset function. The function is the same as RESET key on the keyboard. Remote fault reset can be realized with this function.
1423 +|=(% style="width: 140px;" %)10|(% style="text-align:center; width:232px" %)Operation pause|(% style="width:378px" %)The inverter slows down and stops, but all operating parameters are memory state. Such as PLC parameters, pendulum parameters, PID parameters. After the signal disappears, the inverter will resume operation to the state before stopping.
1424 +|=(% style="width: 140px;" %)11|(% style="text-align:center; width:232px" %)External fault normally open input|(% style="width:378px" %)When the external fault signal is sent to the inverter, the inverter reports a fault and stops
1425 +|=(% style="width: 140px;" %)12|(% style="text-align:center; width:232px" %)Multi-segment speed instruction terminal 1|(% rowspan="4" style="width:378px" %)A total of 15 segment speeds can be set through the combination of the digital state of the four terminals. The detailed composition is shown in Table 1.
1426 +|=(% style="width: 140px;" %)13|(% style="text-align:center; width:232px" %)Multi-segment speed instruction terminal 2
1427 +|=(% style="width: 140px;" %)14|(% style="text-align:center; width:232px" %)Multi-segment speed instruction terminal 3
1428 +|=(% style="width: 140px;" %)15|(% style="text-align:center; width:232px" %)Multi-segment speed instruction terminal 4
1429 +|=(% style="width: 140px;" %)16|(% style="text-align:center; width:232px" %)Acceleration and deceleration time selection 1|(% rowspan="2" style="width:378px" %)Selects four acceleration and deceleration times through the combination of the digital states of the two terminals. The detailed composition is shown in Schedule 2.
1430 +|=(% style="width: 140px;" %)17|(% style="text-align:center; width:232px" %)Acceleration and deceleration time selection 2
1431 +|=(% style="width: 140px;" %)18|(% style="text-align:center; width:232px" %)Frequency source Switching|(% style="width:378px" %)(((
1441 1441  When the frequency source selection (F0.07 bits) is set to 2, this terminal is not the primary frequency source X, otherwise it is the secondary frequency source Y.
1442 1442  
1443 1443  When the frequency source selection (F0.07 bits) is set to 3, this terminal is invalid as the primary frequency source X, otherwise it is the result of the primary and secondary operations.
1444 1444  )))
1445 -|19|UP/DOWN setting Clear|When the frequency is set to digital frequency, this terminal can clear the frequency value of UP/DOWN change, so that the given frequency is restored to the value set by F0.08.
1446 -|20|Run the instruction to switch terminals|(((
1436 +|=(% style="width: 140px;" %)19|(% style="text-align:center; width:232px" %)UP/DOWN setting Clear|(% style="width:378px" %)When the frequency is set to digital frequency, this terminal can clear the frequency value of UP/DOWN change, so that the given frequency is restored to the value set by F0.08.
1437 +|=(% style="width: 140px;" %)20|(% style="text-align:center; width:232px" %)Run the instruction to switch terminals|(% style="width:378px" %)(((
1447 1447  When the command source (F0.01=1) is set to terminal control, the terminal is switched to keyboard control.
1448 1448  
1449 1449  When the command source (F0.01=2) is set to Communication control, this terminal is switched to keyboard control.
1450 1450  )))
1451 -|21|Acceleration and deceleration Disable|Ensure that the inverter is not affected by external signals (except for shutdown commands) and maintain the current output frequency.
1452 -|22|PID pause|PID temporarily fails, inverter maintains current frequency output.
1453 -|23|PLC state reset|The PLC is paused during execution, and can be returned to the initial state of the simple PLC through this terminal when running again.
1454 -|29|Torque control disable|(((
1442 +|=(% style="width: 140px;" %)21|(% style="text-align:center; width:232px" %)Acceleration and deceleration Disable|(% style="width:378px" %)Ensure that the inverter is not affected by external signals (except for shutdown commands) and maintain the current output frequency.
1443 +|=(% style="width: 140px;" %)22|(% style="text-align:center; width:232px" %)PID pause|(% style="width:378px" %)PID temporarily fails, inverter maintains current frequency output.
1444 +|=(% style="width: 140px;" %)23|(% style="text-align:center; width:232px" %)PLC state reset|(% style="width:378px" %)The PLC is paused during execution, and can be returned to the initial state of the simple PLC through this terminal when running again.
1445 +|=(% style="width: 140px;" %)29|(% style="text-align:center; width:232px" %)Torque control disable|(% style="width:378px" %)(((
1455 1455  The torque control mode of the inverter is prohibited.
1456 1456  
1457 1457  30 PULSE Pulse input
1458 1458  )))
1459 -|30|(((
1450 +|=(% style="width: 140px;" %)30|(% style="text-align:center; width:232px" %)(((
1460 1460  PULSE pulse input
1461 1461  
1462 1462  (valid for DI4 only)
1463 -)))|Is the pulse input terminal.
1464 -|32|Immediate DC braking|The terminal is effective, the inverter directly switches to DC braking state, and exits if invalid.
1465 -|33|External fault normally closed input|
1466 -|35|PID action direction Take the reverse terminal|If this terminal is valid, the PID action direction is opposite to the direction set in F9.03.
1467 -|36|(((
1454 +)))|(% style="width:378px" %)Is the pulse input terminal.
1455 +|=(% style="width: 140px;" %)32|(% style="text-align:center; width:232px" %)Immediate DC braking|(% style="width:378px" %)The terminal is effective, the inverter directly switches to DC braking state, and exits if invalid.
1456 +|=(% style="width: 140px;" %)33|(% style="text-align:center; width:232px" %)External fault normally closed input|(% style="width:378px" %)
1457 +|=(% style="width: 140px;" %)35|(% style="text-align:center; width:232px" %)PID action direction Take the reverse terminal|(% style="width:378px" %)If this terminal is valid, the PID action direction is opposite to the direction set in F9.03.
1458 +|=(% style="width: 140px;" %)36|(% style="text-align:center; width:232px" %)(((
1468 1468  External parking terminal 1
1469 1469  
1470 1470  (Panel only)
1471 -)))|For keyboard control, the terminal can be used to STOP, which is equivalent to the Stop key on the keyboard.
1472 -|37|Control command switch terminal|This terminal is valid. If F0.01 is set to terminal control, it switches to communication control. If F0.01 is set to communication control, switch to terminal control.
1473 -|38|PID Integration pause terminal|If the terminal is valid, the PID integration function is paused, but the proportional and differential adjustment still work.
1474 -|39|Primary frequency source and Preset frequency switching terminal|If this terminal is valid, replace the primary frequency source with the preset frequency (F0.08).
1475 -|40|Auxiliary frequency source and Preset frequency switching terminal|If this terminal is valid, replace the auxiliary frequency source with the preset frequency (F0.08).
1476 -|43|PID parameter switching|This terminal is valid only when the terminal F9.18(PID parameter switching condition) is the DI terminal. Parameter F9.15 to F9.17 is used for PID. The terminal is invalid. Parameters F9.05 to F9.07 are used.
1477 -|44|User-defined fault 1|When the external fault signal is sent to the VFD, the VFD reports a fault and stops.
1478 -|45|User-defined fault 2|When the external fault signal is sent to the VFD, the VFD reports a fault and stops.
1479 -|46|Speed control/torque control switching|Switch the inverter to run in torque control or speed control mode. If this terminal is invalid, it runs in the mode defined by F3.09 (speed/torque control mode), and if it is valid, it switches to the other mode.
1480 -|47|Emergency stop|This terminal is valid and the inverter stops at F8.09 emergency stop time.
1481 -|48|External parking terminal 2|In any control mode, this terminal can be used to stop the car, according to the deceleration time 4.
1482 -|49|Deceleration DC braking|This terminal is effective, the inverter first decelerates to the shutdown DC braking starting frequency and then switches to the DC braking state, and exits when invalid.
1483 -|50|Clear the current running time|If this terminal is valid, the inverter's current running timing time will be cleared, and this function will be used for timing running (F8.42).
1462 +)))|(% style="width:378px" %)For keyboard control, the terminal can be used to STOP, which is equivalent to the Stop key on the keyboard.
1463 +|=(% style="width: 140px;" %)37|(% style="text-align:center; width:232px" %)Control command switch terminal|(% style="width:378px" %)This terminal is valid. If F0.01 is set to terminal control, it switches to communication control. If F0.01 is set to communication control, switch to terminal control.
1464 +|=(% style="width: 140px;" %)38|(% style="text-align:center; width:232px" %)PID Integration pause terminal|(% style="width:378px" %)If the terminal is valid, the PID integration function is paused, but the proportional and differential adjustment still work.
1465 +|=(% style="width: 140px;" %)39|(% style="text-align:center; width:232px" %)Primary frequency source and Preset frequency switching terminal|(% style="width:378px" %)If this terminal is valid, replace the primary frequency source with the preset frequency (F0.08).
1466 +|=(% style="width: 140px;" %)40|(% style="text-align:center; width:232px" %)Auxiliary frequency source and Preset frequency switching terminal|(% style="width:378px" %)If this terminal is valid, replace the auxiliary frequency source with the preset frequency (F0.08).
1467 +|=(% style="width: 140px;" %)43|(% style="text-align:center; width:232px" %)PID parameter switching|(% style="width:378px" %)This terminal is valid only when the terminal F9.18(PID parameter switching condition) is the DI terminal. Parameter F9.15 to F9.17 is used for PID. The terminal is invalid. Parameters F9.05 to F9.07 are used.
1468 +|=(% style="width: 140px;" %)44|(% style="text-align:center; width:232px" %)User-defined fault 1|(% style="width:378px" %)When the external fault signal is sent to the VFD, the VFD reports a fault and stops.
1469 +|=(% style="width: 140px;" %)45|(% style="text-align:center; width:232px" %)User-defined fault 2|(% style="width:378px" %)When the external fault signal is sent to the VFD, the VFD reports a fault and stops.
1470 +|=(% style="width: 140px;" %)46|(% style="text-align:center; width:232px" %)Speed control/torque control switching|(% style="width:378px" %)Switch the inverter to run in torque control or speed control mode. If this terminal is invalid, it runs in the mode defined by F3.09 (speed/torque control mode), and if it is valid, it switches to the other mode.
1471 +|=(% style="width: 140px;" %)47|(% style="text-align:center; width:232px" %)Emergency stop|(% style="width:378px" %)This terminal is valid and the inverter stops at F8.09 emergency stop time.
1472 +|=(% style="width: 140px;" %)48|(% style="text-align:center; width:232px" %)External parking terminal 2|(% style="width:378px" %)In any control mode, this terminal can be used to stop the car, according to the deceleration time 4.
1473 +|=(% style="width: 140px;" %)49|(% style="text-align:center; width:232px" %)Deceleration DC braking|(% style="width:378px" %)This terminal is effective, the inverter first decelerates to the shutdown DC braking starting frequency and then switches to the DC braking state, and exits when invalid.
1474 +|=(% style="width: 140px;" %)50|(% style="text-align:center; width:232px" %)Clear the current running time|(% style="width:378px" %)If this terminal is valid, the inverter's current running timing time will be cleared, and this function will be used for timing running (F8.42).
1484 1484  
1485 1485  Schedule 1: multi-stage speed function description.
1486 1486  
1487 -|**K4**|**K3**|**K2**|**K1**|**Frequency setting**|**Corresponding parameter**
1488 -|OFF|OFF|OFF|OFF|Multiple speed 0|FD.0
1489 -|OFF|OFF|OFF|ON|Multiple speed 1|FD.01
1490 -|OFF|OFF|ON|OFF|Multiple speed 2|FD.02
1491 -|OFF|OFF|ON|ON|Multiple speed 3|FD.03
1492 -|OFF|ON|OFF|OFF|Multiple speed 4|FD.04
1493 -|OFF|ON|OFF|ON|Multiple speed 5|FD.05
1494 -|OFF|ON|ON|OFF|Multiple speed 6|FD.06
1495 -|OFF|ON|ON|ON|Multiple speed 7|FD.07
1496 -|ON|OFF|OFF|OFF|Multiple speed 8|FD.08
1497 -|ON|OFF|OFF|ON|Multiple speed 9|FD.09
1498 -|ON|OFF|ON|OFF|Multiple speed 10|FD.10
1499 -|ON|OFF|ON|ON|Multiple speed 11|FD.11
1500 -|ON|ON|OFF|OFF|Multiple speed 12|FD.12
1501 -|ON|ON|OFF|ON|Multiple speed 13|FD.13
1502 -|ON|ON|ON|OFF|Multiple speed 14|FD.14
1503 -|ON|ON|ON|ON|Multiple speed 15|FD.15
1478 +(% style="margin-left:auto; margin-right:auto" %)
1479 +|=**K4**|=**K3**|=**K2**|=**K1**|=**Frequency setting**|=**Corresponding parameter**
1480 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Multiple speed 0|(% style="text-align:center" %)FD.0
1481 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)Multiple speed 1|(% style="text-align:center" %)FD.01
1482 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Multiple speed 2|(% style="text-align:center" %)FD.02
1483 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)Multiple speed 3|(% style="text-align:center" %)FD.03
1484 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Multiple speed 4|(% style="text-align:center" %)FD.04
1485 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)Multiple speed 5|(% style="text-align:center" %)FD.05
1486 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Multiple speed 6|(% style="text-align:center" %)FD.06
1487 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)Multiple speed 7|(% style="text-align:center" %)FD.07
1488 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Multiple speed 8|(% style="text-align:center" %)FD.08
1489 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)Multiple speed 9|(% style="text-align:center" %)FD.09
1490 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Multiple speed 10|(% style="text-align:center" %)FD.10
1491 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)Multiple speed 11|(% style="text-align:center" %)FD.11
1492 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Multiple speed 12|(% style="text-align:center" %)FD.12
1493 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)Multiple speed 13|(% style="text-align:center" %)FD.13
1494 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Multiple speed 14|(% style="text-align:center" %)FD.14
1495 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)Multiple speed 15|(% style="text-align:center" %)FD.15
1504 1504  
1505 1505  Schedule 2: Acceleration and deceleration time selection instructions.
1506 1506  
1507 -|**Terminal 2**|**Terminal 1**|**Acceleration or deceleration time selection**|**Corresponding parameter**
1508 -|OFF|OFF|Acceleration time 1|F0.17 , F0.18
1509 -|OFF|ON|Acceleration time 2|F8.03 , F8.04
1510 -|ON|OFF|Acceleration time 3|F8.05 , F8.06
1511 -|ON|ON|Acceleration time 4|F8.07 , F8.08
1499 +(% style="margin-left:auto; margin-right:auto" %)
1500 +|=**Terminal 2**|=**Terminal 1**|=**Acceleration or deceleration time selection**|=**Corresponding parameter**
1501 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Acceleration time 1|(% style="text-align:center" %)F0.17 , F0.18
1502 +|(% style="text-align:center" %)OFF|(% style="text-align:center" %)ON|(% style="text-align:center" %)Acceleration time 2|(% style="text-align:center" %)F8.03 , F8.04
1503 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)OFF|(% style="text-align:center" %)Acceleration time 3|(% style="text-align:center" %)F8.05 , F8.06
1504 +|(% style="text-align:center" %)ON|(% style="text-align:center" %)ON|(% style="text-align:center" %)Acceleration time 4|(% style="text-align:center" %)F8.07 , F8.08
1512 1512  
1513 -
1514 -
1515 -
1516 -
1517 -
1518 -
1519 -|(% rowspan="2" %)**F5.10**|**AI1 input selection**|**Factory default**|0
1520 -|Setting range|(% colspan="2" %)(((
1506 +|(% rowspan="2" style="text-align:center" %)F5.10|(% style="text-align:center; width:311px" %)**AI1 input selection**|(% style="text-align:center; width:261px" %)**Factory default**|(% style="text-align:center" %)0
1507 +|(% style="text-align:center; width:311px" %)Setting range|(% colspan="2" style="width:320px" %)(((
1521 1521  0: 0 to 10V
1522 1522  
1523 1523  1: 4 to 20mA
... ... @@ -1528,8 +1528,8 @@
1528 1528  
1529 1529  4: 0.5 to 4.5V
1530 1530  )))
1531 -|(% rowspan="2" %)**F5.11**|**AI2 input selection**|**Factory default**|1
1532 -|Setting range|(% colspan="2" %)(((
1518 +|(% rowspan="2" style="text-align:center" %)F5.11|(% style="text-align:center; width:311px" %)**AI2 input selection**|(% style="text-align:center; width:261px" %)**Factory default**|(% style="text-align:center" %)1
1519 +|(% style="text-align:center; width:311px" %)Setting range|(% colspan="2" style="width:320px" %)(((
1533 1533  0: 0 to 10V
1534 1534  
1535 1535  1: 4 to 20mA
... ... @@ -1543,24 +1543,24 @@
1543 1543  
1544 1544  AI1 input selection: AI1 does not support current input.
1545 1545  
1546 -|F5.12|VDI1 terminal function selection|Factory default|0
1547 -|F5.13|VDI2 terminal function selection|Factory default|0
1548 -|F5.14|VDI3 terminal function selection|Factory default|0
1533 +|(% style="text-align:center" %)F5.12|(% style="text-align:center" %)VDI1 terminal function selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1534 +|(% style="text-align:center" %)F5.13|(% style="text-align:center" %)VDI2 terminal function selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1535 +|(% style="text-align:center" %)F5.14|(% style="text-align:center" %)VDI3 terminal function selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1549 1549  
1550 1550  VDI1 to VDI3 terminal function: Three virtual DI.
1551 1551  
1552 -|(% rowspan="2" %)F5.15|DI filtering time|Factory default|0.010s
1553 -|Setting range|(% colspan="2" %)0.000s to 1.000s
1539 +|(% rowspan="2" style="text-align:center" %)F5.15|(% style="text-align:center" %)DI filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.010s
1540 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.000s to 1.000s
1554 1554  
1555 1555  Set the sensitivity of the DI terminal. If the digital input terminal is susceptible to interference and cause misoperation, this parameter can be increased, the anti-interference ability is enhanced, but the sensitivity of the DI terminal is reduced.
1556 1556  
1557 -|(% rowspan="2" %)F5.16|Terminal command mode|Factory default|0
1558 -|Setting range|(% colspan="2" %)(((
1559 -0: two-line type 1
1544 +|(% rowspan="2" style="text-align:center" %)F5.16|(% style="text-align:center" %)Terminal command mode|(% style="text-align:center" %)Factory default|0
1545 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:left" %)(((
1546 +0: Two-line type 1
1560 1560  
1561 1561  1: Two-wire type 2
1562 1562  
1563 -2: three-wire type 1
1550 +2: Three-wire type 1
1564 1564  
1565 1565  3: Three-wire type 2
1566 1566  )))
... ... @@ -1577,68 +1577,70 @@
1577 1577  
1578 1578  Din is the multifunctional input of DI1 to DI4, and its corresponding terminal function should be defined as function No. 3 "three-wire operation control".
1579 1579  
1580 -|(% rowspan="2" %)F5.17|UP/DOWN Rate of change|Factory default|0.50Hz
1581 -|Setting range|(% colspan="2" %)0.01Hz to 655.35Hz
1567 +|(% rowspan="2" style="text-align:center" %)F5.17|(% style="text-align:center" %)UP/DOWN Rate of change|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.50Hz
1568 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01Hz to 655.35Hz
1582 1582  
1583 1583  Press the UP/DOWN button and the terminal to adjust the change rate of the set frequency.
1584 1584  
1585 -|(% rowspan="2" %)F5.18|AI1 minimum input|Factory default|0.00V
1586 -|Setting range|(% colspan="2" %)0.00V to F5.20
1587 -|(% rowspan="2" %)F5.19|AI1 the minimum input corresponds to the setting|Factory default|0%
1588 -|Setting range|(% colspan="2" %)-100.00% to +100.0%
1589 -|(% rowspan="2" %)F5.20|AI1 maximum input|Factory default|10.00V
1590 -|Setting range|(% colspan="2" %)F5.18- +10.00V
1591 -|(% rowspan="2" %)F5.21|AI1 the maximum input corresponds to the setting|Factory default|100.0%
1592 -|Setting range|(% colspan="2" %)-100.00% to +100.0%
1593 -|(% rowspan="2" %)F5.22|AI1 filtering time|Factory default|0.10s
1594 -|Setting range|(% colspan="2" %)0.00s-10.00s
1595 -|(% rowspan="2" %)F5.23|AI2 minimum input|Factory default|2.00V
1596 -|Setting range|(% colspan="2" %)-10.00V to F5.25
1597 -|(% rowspan="2" %)F5.24|AI2 the minimum input corresponds to the setting|Factory default|0%
1598 -|Setting range|(% colspan="2" %)-100.00% to +100.0%
1599 -|(% rowspan="2" %)F5.25|AI2 maximum input|Factory default|10.00V
1600 -|Setting range|(% colspan="2" %)F5.23 to +10.00V
1601 -|(% rowspan="2" %)F5.26|AI2 the maximum input corresponds to the setting|Factory default|100.0%
1602 -|Setting range|(% colspan="2" %)-100.00% to +100.0%
1603 -|(% rowspan="2" %)F5.27|AI2 filtering time|Factory default|0.10s
1604 -|Setting range|(% colspan="2" %)0.00s to 10.00s
1572 +|(% rowspan="2" style="text-align:center" %)F5.18|(% style="text-align:center" %)AI1 minimum input|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00V
1573 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00V to F5.20
1574 +|(% rowspan="2" style="text-align:center" %)F5.19|(% style="text-align:center" %)AI1 the minimum input corresponds to the setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0%
1575 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)-100.00% to +100.0%
1576 +|(% rowspan="2" style="text-align:center" %)F5.20|(% style="text-align:center" %)AI1 maximum input|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.00V
1577 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)F5.18- +10.00V
1578 +|(% rowspan="2" style="text-align:center" %)F5.21|(% style="text-align:center" %)AI1 the maximum input corresponds to the setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
1579 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)-100.00% to +100.0%
1580 +|(% rowspan="2" style="text-align:center" %)F5.22|(% style="text-align:center" %)AI1 filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.10s
1581 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00s-10.00s
1582 +|(% rowspan="2" style="text-align:center" %)F5.23|(% style="text-align:center" %)AI2 minimum input|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.00V
1583 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)-10.00V to F5.25
1584 +|(% rowspan="2" style="text-align:center" %)F5.24|(% style="text-align:center" %)AI2 the minimum input corresponds to the setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0%
1585 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)-100.00% to +100.0%
1586 +|(% rowspan="2" style="text-align:center" %)F5.25|(% style="text-align:center" %)AI2 maximum input|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.00V
1587 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)F5.23 to +10.00V
1588 +|(% rowspan="2" style="text-align:center" %)F5.26|(% style="text-align:center" %)AI2 the maximum input corresponds to the setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
1589 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)-100.00% to +100.0%
1590 +|(% rowspan="2" style="text-align:center" %)F5.27|(% style="text-align:center" %)AI2 filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.10s
1591 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00s to 10.00s
1605 1605  
1606 1606  The above function code defines the relationship between the analog input voltage and the set value represented by the analog input. When the analog input voltage exceeds the set maximum input range, the other part will be calculated as the maximum input; when the analog input voltage exceeds the set minimum input range, the other part will be calculated according to the AI minimum input. When the analog input is a current input, 1mA current is equivalent to 0.5V voltage. In different applications, the nominal value corresponding to the simulated 100% is different, please refer to the description of each application.
1607 1607  
1608 1608  The following illustrations illustrate several settings:
1609 1609  
1610 -[[image:1763083956225-706.png]]
1597 +(% style="text-align:center" %)
1598 +(((
1599 +(% style="display:inline-block;" %)
1600 +[[Figure 9-5-1 simulates the correspondence between given and set quantities>>image:1763083956225-706.png||height="527" width="357"]]
1601 +)))
1611 1611  
1612 -Figure 9-5-1 simulates the correspondence between given and set quantities
1603 +|(% rowspan="2" style="text-align:center" %)F5.28|(% style="text-align:center" %)PULSE input minimum frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00kHz
1604 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to F5.30
1605 +|(% rowspan="2" style="text-align:center" %)F5.29|(% style="text-align:center" %)PULSE the minimum frequency corresponds to the setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0%
1606 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)-100.00% to +100.0%
1607 +|(% rowspan="2" style="text-align:center" %)F5.30|(% style="text-align:center" %)pulse input maximum frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.00kHz
1608 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)F5.28 to 50.00kHz
1609 +|(% rowspan="2" style="text-align:center" %)F5.31|(% style="text-align:center" %)PULSE maximum frequency Correspondence setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
1610 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)-100.00% to +100.0%
1611 +|(% rowspan="2" style="text-align:center" %)F5.32|(% style="text-align:center" %)PULSE filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.10s
1612 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00s to 10.00s
1613 1613  
1614 -|(% rowspan="2" %)F5.28|PULSE input minimum frequency|Factory default|0.00kHz
1615 -|Setting range|(% colspan="2" %)0.00 to F5.30
1616 -|(% rowspan="2" %)F5.29|PULSE the minimum frequency corresponds to the setting|Factory default|0%
1617 -|Setting range|(% colspan="2" %)-100.00% to +100.0%
1618 -|(% rowspan="2" %)F5.30|pulse input maximum frequency|Factory default|20.00kHz
1619 -|Setting range|(% colspan="2" %)F5.28 to 50.00kHz
1620 -|(% rowspan="2" %)F5.31|PULSE maximum frequency Correspondence setting|Factory default|100.0%
1621 -|Setting range|(% colspan="2" %)-100.00% to +100.0%
1622 -|(% rowspan="2" %)F5.32|PULSE filtering time|Factory default|0.10s
1623 -|Setting range|(% colspan="2" %)0.00s to 10.00s
1624 -
1625 1625  This set of function codes defines the correspondence when pulses are used as the frequency setting mode. Pulse frequency input can only be entered through the DI4 channel. The application of this set of functions is similar to that of AI1.
1626 1626  
1627 -|(% rowspan="2" %)F5.33|DI1 enable the delay time|Factory default|0.0s
1628 -|Setting range|(% colspan="2" %)0.0s to 360.0s
1629 -|(% rowspan="2" %)F5.34|DI2 enable the delay time|Factory default|0.0s
1630 -|Setting range|(% colspan="2" %)0.0s to 360.0s
1631 -|(% rowspan="2" %)F5.35|DI1 forbidden energy delay time|Factory default|0.0s
1632 -|Setting range|(% colspan="2" %)0.0s to 360.0s
1633 -|(% rowspan="2" %)F5.36|DI2 forbidden energy delay time|Factory default|0.0s
1634 -|Setting range|(% colspan="2" %)0.0s to 360.0s
1616 +|(% rowspan="2" style="text-align:center" %)F5.33|(% style="text-align:center" %)DI1 enable the delay time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
1617 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 360.0s
1618 +|(% rowspan="2" style="text-align:center" %)F5.34|(% style="text-align:center" %)DI2 enable the delay time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
1619 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 360.0s
1620 +|(% rowspan="2" style="text-align:center" %)F5.35|(% style="text-align:center" %)DI1 forbidden energy delay time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
1621 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 360.0s
1622 +|(% rowspan="2" style="text-align:center" %)F5.36|(% style="text-align:center" %)DI2 forbidden energy delay time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
1623 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 360.0s
1635 1635  
1636 1636  Set the delay time between the DI terminal state change and the VFD response.
1637 1637  
1638 1638  At present, only DI1\DI2 has the ability to set the delay time.
1639 1639  
1640 -|(% rowspan="2" %)F5.37|Enter terminal valid status setting 1|Factory default|0
1641 -|Setting range|(% colspan="2" %)(((
1629 +|(% rowspan="2" style="text-align:center" %)F5.37|(% style="text-align:center" %)Enter terminal valid status setting 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1630 +|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
1642 1642  0: The low level is valid
1643 1643  
1644 1644  1: The high level is valid
... ... @@ -1651,8 +1651,8 @@
1651 1651  
1652 1652  LED thousands place: D4 terminal
1653 1653  )))
1654 -|(% rowspan="2" %)F5.38|Enter terminal valid status setting 2|Factory default|0
1655 -|Setting range|(% colspan="2" %)(((
1643 +|(% rowspan="2" style="text-align:center" %)F5.38|(% style="text-align:center" %)Enter terminal valid status setting 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1644 +|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
1656 1656  0: The low level is valid
1657 1657  
1658 1658  1: The high level is valid
... ... @@ -1661,8 +1661,8 @@
1661 1661  
1662 1662  LED tens place: D6 terminal (Extended)
1663 1663  )))
1664 -|(% rowspan="2" %)F5.39|Enter terminal valid status setting 3|Factory default|0
1665 -|Setting range|(% colspan="2" %)(((
1653 +|(% rowspan="2" style="text-align:center" %)F5.39|(% style="text-align:center" %)Enter terminal valid status setting 3|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1654 +|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
1666 1666  0: The low level is valid
1667 1667  
1668 1668  1: The high level is valid
... ... @@ -1673,8 +1673,8 @@
1673 1673  
1674 1674  LED Hundreds place: AI3 (Extended)
1675 1675  )))
1676 -|(% rowspan="2" %)F5.40|Analog input curve selection|Factory default|0
1677 -|Setting range|(% colspan="2" %)(((
1665 +|(% rowspan="2" style="text-align:center" %)F5.40|(% style="text-align:center" %)Analog input curve selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
1666 +|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
1678 1678  The ones place: AI1
1679 1679  
1680 1680  Tens place: AI2
... ... @@ -1694,12 +1694,12 @@
1694 1694  
1695 1695  Low level: The connection between the DI terminal and COM is invalid, and the disconnect is valid.
1696 1696  
1697 -|(% rowspan="2" %)F5.57|AI3(Extension) is used to select the DI terminal function|Factory default|
1698 -|Setting range|(% colspan="2" %)For details, see the function table of the DI multi-function input terminal
1699 -|(% rowspan="2" %)F5.58|AI4(Extension) is used to select the DI terminal function|Factory default|
1700 -|Setting range|(% colspan="2" %)For details, see the function table of the DI multi-function input terminal
1701 -|(% rowspan="2" %)F5.59|AI3(Extension) input selection|Factory default|0
1702 -|Setting range|(% colspan="2" %)(((
1686 +|(% rowspan="2" style="text-align:center" %)F5.57|(% style="text-align:center; width:449px" %)AI3(Extension) is used to select the DI terminal function|(% style="text-align:center; width:203px" %)Factory default|
1687 +|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:left; width:398px" %)For details, see the function table of the DI multi-function input terminal
1688 +|(% rowspan="2" style="text-align:center" %)F5.58|(% style="text-align:center; width:449px" %)AI4(Extension) is used to select the DI terminal function|(% style="text-align:center; width:203px" %)Factory default|
1689 +|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:left; width:398px" %)For details, see the function table of the DI multi-function input terminal
1690 +|(% rowspan="2" style="text-align:center" %)F5.59|(% style="text-align:center; width:449px" %)AI3(Extension) input selection|(% style="text-align:center; width:203px" %)Factory default|0
1691 +|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:left; width:398px" %)(((
1703 1703  0: 0 to 10V
1704 1704  
1705 1705  1: 4 to 20mA
... ... @@ -1710,8 +1710,8 @@
1710 1710  
1711 1711  4: 0.5 to 4.5V
1712 1712  )))
1713 -|(% rowspan="2" %)F5.60|AI3(Extension) input selection|Factory default|0
1714 -|Setting range|(% colspan="2" %)(((
1702 +|(% rowspan="2" style="text-align:center" %)F5.60|(% style="text-align:center; width:449px" %)AI3(Extension) input selection|(% style="text-align:center; width:203px" %)Factory default|0
1703 +|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:left; width:398px" %)(((
1715 1715  0: 0 to 10V
1716 1716  
1717 1717  1: 4 to 20mA
... ... @@ -1722,25 +1722,29 @@
1722 1722  
1723 1723  4: 0.5 to 4.5V
1724 1724  )))
1725 -|(% rowspan="2" %)F5.61|AI3(Extended) lower limit|Factory default|-10.00V
1726 -|Setting range|(% colspan="2" %)0 to F5.63
1727 -|(% rowspan="2" %)F5.62|AI3(Extended) lower limit is set accordingly|Factory default|-100.00%
1728 -|Setting range|(% colspan="2" %)-100.0% to +100.0%
1729 -|(% rowspan="2" %)F5.63|AI3(Extended) Upper limit|Factory default|10.00V
1730 -|Setting range|(% colspan="2" %)F5.61 to +10.00V
1731 -|(% rowspan="2" %)F5.64|The AI3(Extended) upper limit corresponds to the setting|Factory default|100.00%
1732 -|Setting range|(% colspan="2" %)-100.0% to +100.0%
1714 +|(% rowspan="2" style="text-align:center" %)F5.61|(% style="text-align:center; width:449px" %)AI3(Extended) lower limit|(% style="text-align:center; width:203px" %)Factory default|-10.00V
1715 +|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:center; width:398px" %)0 to F5.63
1716 +|(% rowspan="2" style="text-align:center" %)F5.62|(% style="text-align:center; width:449px" %)AI3(Extended) lower limit is set accordingly|(% style="text-align:center; width:203px" %)Factory default|-100.00%
1717 +|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:center; width:398px" %)-100.0% to +100.0%
1718 +|(% rowspan="2" style="text-align:center" %)F5.63|(% style="text-align:center; width:449px" %)AI3(Extended) Upper limit|(% style="text-align:center; width:203px" %)Factory default|10.00V
1719 +|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:center; width:398px" %)F5.61 to +10.00V
1720 +|(% rowspan="2" style="text-align:center" %)F5.64|(% style="text-align:center; width:449px" %)The AI3(Extended) upper limit corresponds to the setting|(% style="text-align:center; width:203px" %)Factory default|100.00%
1721 +|(% style="text-align:center; width:449px" %)Setting range|(% colspan="2" style="text-align:center; width:398px" %)-100.0% to +100.0%
1733 1733  
1734 1734  2-channel expansion AI.
1735 1735  
1736 -|(% rowspan="2" %)F5.65|AI3(Extended) filtering time|Factory default|0.10s
1737 -|Setting range|(% colspan="2" %)0.00 to 10.00s
1725 +|(% rowspan="2" style="text-align:center" %)F5.65|(% style="text-align:center" %)AI3(Extended) filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.10s
1726 +|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 10.00s
1738 1738  
1739 1739  The above function code defines the relationship between the analog input voltage and the set value represented by the analog input. When the analog input voltage exceeds the set maximum input range, the other part will be calculated as the maximum input; when the analog input voltage exceeds the set minimum input range, the other part will be calculated according to the AI minimum input. When the analog input is a current input, 1mA current is equivalent to 0.5V voltage. In different applications, the nominal value corresponding to the simulated 100% is different, please refer to the description of each application.
1740 1740  
1741 1741  The following illustrations illustrate several settings:
1742 1742  
1743 -[[image:1763083956228-763.png]]
1732 +(% style="text-align:center" %)
1733 +(((
1734 +(% style="display:inline-block" %)
1735 +[[Figure 9-5-1 Simulates the correspondence between given and set quantities>>image:1763083956228-763.png]]
1736 +)))
1744 1744  
1745 1745  
1746 -Figure 9-5-1 Ssimulates the correspondence between given and set quantities
1739 +