Changes for page 09 Function code

Last modified by Iris on 2025/11/17 14:59

From 11.1 to 12.1 From 13.2 to 14.1

From version 12.1

edited by Iris
on 2025/11/14 16:13

Change comment: There is no comment for this version

To version 13.2

edited by Iris
on 2025/11/17 14:54

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 3 added, 0 removed)

Details

Page properties

Content

@@ -1739,94 +1739,90 @@
  The VC series VFD standard unit has 2 multi-function relay output terminals, 1 FM terminal (which can be used as a high-speed pulse output terminal or as an open collector output), and 2 multi-function analog output terminals.
--|(% rowspan="3" %)F6.00|(% colspan="2" %)FM Terminal output selection|Factory default|1
--|(% rowspan="2" %)Setting range|0|(% colspan="2" %)Pulse output
--|1|(% colspan="2" %)Open collector output (FMR)
++|(% rowspan="3" style="text-align:center" %)F6.00|(% colspan="2" style="text-align:center" %)FM Terminal output selection|(% style="text-align:center" %)Factory default|1
++|(% rowspan="2" style="text-align:center" %)Setting range|(% style="text-align:center" %)0|(% colspan="2" style="text-align:center" %)Pulse output
++|(% style="text-align:center" %)1|(% colspan="2" style="text-align:center" %)Open collector output (FMR)
  FM terminals are programmable multiplexed terminals. Can be used as a high speed pulse output terminal (FMP), pulse frequency up to 100kHz. Refer to F6.06 for FMP related functions. Also available as an open collector output terminal (FMR). See F6.01 for FMR functions.
  FMP function needs hardware support.
--|F6.01|FMR Open collector output selection|Factory default|0
--|F6.02|Relay 1 output selection|Factory default|2
--|F6.03|Relay 2 output selection (Extended)|Factory default|0
--|F6.06|VDO1 output selection|Factory default|0
--|F6.07|VDO2 output selection|Factory default|0
--|F6.08|VDO3 output selection|Factory default|0
++|(% style="text-align:center" %)F6.01|(% style="text-align:center" %)FMR Open collector output selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)F6.02|(% style="text-align:center" %)Relay 1 output selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2
++|(% style="text-align:center" %)F6.03|(% style="text-align:center" %)Relay 2 output selection (Extended)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)F6.06|(% style="text-align:center" %)VDO1 output selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)F6.07|(% style="text-align:center" %)VDO2 output selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)F6.08|(% style="text-align:center" %)VDO3 output selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
--
--
  Multi-function output terminal function selection are as follows:
--|**Setting value**|**Function**|**Description**
--|0|No-output|The output terminal has no function
--|1|VFD in operation|Indicates that the inverter is running, there is an output frequency (can be zero) at this time output ON signal.
--|2|Fault output|When the inverter fails and fails to stop, the output ON signal.
--|3|Frequency level detects FDT arrival|Please refer to function codes F8.19 and F8.20 for detailed instructions
--|4|Frequency arrival|Please refer to function code F8.26 for detailed instructions.
--|5|Running at zero speed|The VFD operates and the output frequency is 0, and the output signal is ON.
--|6|Motor overload pre-alarm|Before the motor electronic thermal protection action, according to the overload forecast value, after exceeding the forecast value output ON signal. Motor overload parameters are set in FA.00 to FA.02.
--|7|Inverter overload pre-alarm|After checking the inverter overload, 10s before the protection occurs. Output ON signal.
--|8|Set count pulse value to arrive|When the count value reaches the value set by FB.08, the ON signal is output.
--|9|Specified count pulse value arrived|When the count value reaches the value set by FB.09, the ON signal is output. For the counting function, see FB group function description
--|10|Length reached|When the actual length of the detection exceeds the length set by FB.05, the ON signal is output.
--|11|PLC cycle complete|When the simple PLC completes a cycle, it outputs a pulse signal with a width of 250ms.
--|12|Cumulative running time arrived|When the accumulated running time of the inverter exceeds the time set by F8.17, the output ON signal.
--|13|-|-
--|14|Torque limit|When the torque limit function is operated, the stall protection function automatically acts, automatically changes the output frequency, and the output ON signal indicates that the output torque is limited. This output signal can be used to reduce the load or to display an overload status signal on the monitoring device.
--|15|Operational readiness|The main circuit and control circuit power supply are established, the inverter protection function is not active, and the inverter is in the running state, the ON signal is output.
--|16|AI1>AI2|When the value of the analog input AI1 is greater than that of the other input AI2, the ON signal is output.
--|17|Frequency upper limit reached|Output ON signal when the operating frequency reaches the upper limit frequency.
--|18|(((
++(% style="margin-left:auto; margin-right:auto" %)
++|=**Setting value**|=**Function**|=**Description**
++|=0|No-output|The output terminal has no function
++|=1|VFD in operation|Indicates that the inverter is running, there is an output frequency (can be zero) at this time output ON signal.
++|=2|Fault output|When the inverter fails and fails to stop, the output ON signal.
++|=3|Frequency level detects FDT arrival|Please refer to function codes F8.19 and F8.20 for detailed instructions
++|=4|Frequency arrival|Please refer to function code F8.26 for detailed instructions.
++|=5|Running at zero speed|The VFD operates and the output frequency is 0, and the output signal is ON.
++|=6|Motor overload pre-alarm|Before the motor electronic thermal protection action, according to the overload forecast value, after exceeding the forecast value output ON signal. Motor overload parameters are set in FA.00 to FA.02.
++|=7|Inverter overload pre-alarm|After checking the inverter overload, 10s before the protection occurs. Output ON signal.
++|=8|Set count pulse value to arrive|When the count value reaches the value set by FB.08, the ON signal is output.
++|=9|Specified count pulse value arrived|When the count value reaches the value set by FB.09, the ON signal is output. For the counting function, see FB group function description
++|=10|Length reached|When the actual length of the detection exceeds the length set by FB.05, the ON signal is output.
++|=11|PLC cycle complete|When the simple PLC completes a cycle, it outputs a pulse signal with a width of 250ms.
++|=12|Cumulative running time arrived|When the accumulated running time of the inverter exceeds the time set by F8.17, the output ON signal.
++|=13|-|-
++|=14|Torque limit|When the torque limit function is operated, the stall protection function automatically acts, automatically changes the output frequency, and the output ON signal indicates that the output torque is limited. This output signal can be used to reduce the load or to display an overload status signal on the monitoring device.
++|=15|Operational readiness|The main circuit and control circuit power supply are established, the inverter protection function is not active, and the inverter is in the running state, the ON signal is output.
++|=16|AI1>AI2|When the value of the analog input AI1 is greater than that of the other input AI2, the ON signal is output.
++|=17|Frequency upper limit reached|Output ON signal when the operating frequency reaches the upper limit frequency.
++|=18|(((
  Frequency lower limit reached
  (Run related)
  )))|Output ON signal when the operating frequency reaches the lower limit frequency. In the shutdown state, the signal is always OFF.
--|19|Undervoltage state output|The inverter outputs ON signal when it is undervoltage.
--|20|Communication setting|See related instructions in the communication protocol
--|21|Positioning completed|Reserve
--|22|Positioning close|Reserve
--|23|(((
++|=19|Undervoltage state output|The inverter outputs ON signal when it is undervoltage.
++|=20|Communication setting|See related instructions in the communication protocol
++|=21|Positioning completed|Reserve
++|=22|Positioning close|Reserve
++|=23|(((
  Zero speed running 2
  (Also output when shut down)
  )))|VFD output frequency is 0, output ON signal (shutdown also output).
--|24|Accumulative power-on time reached|When F7.13(the accumulated power-on time of the inverter) exceeds the time set by F8.16, the ON signal is output.
--|25|(((
++|=24|Accumulative power-on time reached|When F7.13(the accumulated power-on time of the inverter) exceeds the time set by F8.16, the ON signal is output.
++|=25|(((
  Frequency level detection
  FDT2 output
  )))|For details, see function codes F8.28 and F8.29.
--|26|Frequency to 1 output|For details, see function codes F8.30 and F8.31.
--|27|Frequency to 2output|For details, see function codes F8.32 and F8.33.
--|28|Current reaches 1 output|For details, see function codes F8.38 and F8.39.
--|29|Current reaches 2 output|For details, see function codes F8.40 and F8.41.
--|30|Timed arrival output|When F8.42(timing function selection) is effective, the VFD will output ON signal when the running time reaches the set timing time.
--|31|-|-
--|32|-|
--|33|Running direction|When the inverter runs in reverse, the ON signal is output
--|34|-|
--|35|Module temperature reach|
--|36|Software overcurrent output|For details, see function codes F8.36 and F8.37.
--|37|(((
++|=26|Frequency to 1 output|For details, see function codes F8.30 and F8.31.
++|=27|Frequency to 2output|For details, see function codes F8.32 and F8.33.
++|=28|Current reaches 1 output|For details, see function codes F8.38 and F8.39.
++|=29|Current reaches 2 output|For details, see function codes F8.40 and F8.41.
++|=30|Timed arrival output|When F8.42(timing function selection) is effective, the VFD will output ON signal when the running time reaches the set timing time.
++|=31|-|-
++|=32|-|
++|=33|Running direction|When the inverter runs in reverse, the ON signal is output
++|=34|-|
++|=35|Module temperature reach|
++|=36|Software overcurrent output|For details, see function codes F8.36 and F8.37.
++|=37|(((
  Lower limit frequency reached
  (Run independent)
  )))|Output ON signal when the operating frequency reaches the lower limit frequency. (When the conditions are met, the ON signal will also be output in the shutdown state)
--|38|Fault output (Continue running)|When the inverter fails, output ON signal
--|39|Reserve|
--|40|The running time arrive|
--|41|User defined output 1|User can define the conditions to output the terminal
--|42|User-defined output 2|User can define the conditions to output the terminal
--|43|Timer output|Output ON signal when the timing setting condition is met
--|44|Forward running status|If the inverter is in forward running, output ON signal
--|45|Reverse running status|If the inverter is in reverse running, output ON signal
++|=38|Fault output (Continue running)|When the inverter fails, output ON signal
++|=39|Reserve|
++|=40|The running time arrive|
++|=41|User defined output 1|User can define the conditions to output the terminal
++|=42|User-defined output 2|User can define the conditions to output the terminal
++|=43|Timer output|Output ON signal when the timing setting condition is met
++|=44|Forward running status|If the inverter is in forward running, output ON signal
++|=45|Reverse running status|If the inverter is in reverse running, output ON signal
--
--
--
--|(% rowspan="2" %)F6.10|AO output signal selection|Factory default|00
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F6.10|(% style="text-align:center" %)AO output signal selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)00
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  The ones place: AO1
 : 0 to 10V
@@ -1846,8 +1846,8 @@
  All models 1 AO.
--|(% rowspan="2" %)F6.11|FMP (Pulse output terminal) output selection|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F6.11|(% style="text-align:center" %)FMP (Pulse output terminal) output selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Running frequency
 : Set the frequency
@@ -1882,88 +1882,84 @@
 : Bus voltage (0-1000V, corresponding to 0-10V)
  )))
--|(% rowspan="2" %)F6.12|AO1 output selection|Factory default|0
--|Setting range|(% colspan="2" %)Consistent with F6.11 setting range
--|(% rowspan="2" %)F6.13|AO2 output selection (Extended)|Factory default|0
--|Setting range|(% colspan="2" %)Consistent with F6.11 setting range
++|(% rowspan="2" style="text-align:center" %)F6.12|(% style="text-align:center" %)AO1 output selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)Consistent with F6.11 setting range
++|(% rowspan="2" style="text-align:center" %)F6.13|(% style="text-align:center" %)AO2 output selection (Extended)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)Consistent with F6.11 setting range
  The standard output of the analog output (zero bias is 0, gain 1) is 0mA to 20mA (or 0V to 10V).
  The range of corresponding quantities represented is shown in the following table:
--|**Setting value**|**Function**|**Range**
--|0|Operating frequency|0 to Maximum output frequency
--|1|Setting frequency|0 toMaximum output frequency
--|2|Output current|0 to2 times the rated motor current
--|3|Output torque|0 to2 times the rated motor torque
--|4|Output power|0 to 2 times rated power
--|5|Output voltage|0 to 1.2 times rated voltage of inverter
--|6|(% colspan="2" %)Reserve
--|7|AI1|0V to10V
--|8|AI2|0V to10V/0-20mA
--|9|(% colspan="2" %)Reserve
--|10|Length|0 to Maximum set length
--|11|Count value|0 to Maximum count value
--|12|Communication setting|-10000 to 10000
--|13|Motor speed|0 to The maximum output frequency corresponds to the speed
--|14|Output current|0 to 1000A, correspondence 0-10V
--0 to 1000V, correspondence 0-10V
--|15|Output voltage|0.0V to 1000.0V
--|16|Bus voltage|0 to 1000V, correspondence 0-10V
++(% style="margin-left:auto; margin-right:auto" %)
++|=**Setting value**|=**Function**|=**Range**
++|=0|(% style="text-align:center" %)Operating frequency|(% style="text-align:center" %)0 to Maximum output frequency
++|=1|(% style="text-align:center" %)Setting frequency|(% style="text-align:center" %)0 to Maximum output frequency
++|=2|(% style="text-align:center" %)Output current|(% style="text-align:center" %)0 to 2 times the rated motor current
++|=3|(% style="text-align:center" %)Output torque|(% style="text-align:center" %)0 to 2 times the rated motor torque
++|=4|(% style="text-align:center" %)Output power|(% style="text-align:center" %)0 to 2 times rated power
++|=5|(% style="text-align:center" %)Output voltage|(% style="text-align:center" %)0 to 1.2 times rated voltage of inverter
++|=6|(% colspan="2" style="text-align:center" %)Reserve
++|=7|(% style="text-align:center" %)AI1|(% style="text-align:center" %)0V to10V
++|=8|(% style="text-align:center" %)AI2|(% style="text-align:center" %)0V to 10V/0-20mA
++|=9|(% colspan="2" style="text-align:center" %)Reserve
++|=10|(% style="text-align:center" %)Length|(% style="text-align:center" %)0 to Maximum set length
++|=11|(% style="text-align:center" %)Count value|(% style="text-align:center" %)0 to Maximum count value
++|=12|(% style="text-align:center" %)Communication setting|(% style="text-align:center" %)-10000 to 10000
++|=13|(% style="text-align:center" %)Motor speed|(% style="text-align:center" %)0 to The maximum output frequency corresponds to the speed
++|=14|(% style="text-align:center" %)Output current|(% style="text-align:center" %)0 to 1000A, correspondence 0 to 10V
++0 to 1000V, correspondence 0 to 10V
++|=15|(% style="text-align:center" %)Output voltage|(% style="text-align:center" %)0.0V to 1000.0V
++|=16|(% style="text-align:center" %)Bus voltage|(% style="text-align:center" %)0 to 1000V, correspondence 0 to 10V
++|(% rowspan="2" style="text-align:center" %)F6.14|(% style="text-align:center" %)FM upper frequency output limit|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.00kHz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 100.00kHz
--
--|(% rowspan="2" %)F6.14|FM upper frequency output limit|Factory default|20.00kHz
--|Setting range|(% colspan="2" %)0.00 to- 50.00kHz
--
--
--
  F6.00 maximum frequency of pulse output when selecting pulse output.
--|(% rowspan="2" %)F6.15|AO1 minimum input|Factory default|0.00V
--|Setting range|(% colspan="2" %)0.00V to F6.17
--|(% rowspan="2" %)F6.16|AO1 the minimum input corresponds to the setting|Factory default|0.0%
--|Setting range|(% colspan="2" %)0.0% to +100.0%
--|(% rowspan="2" %)F6.17|AO1 maximum input|Factory default|10.00V
--|Setting range|(% colspan="2" %)F6.15 to +10.00V
--|(% rowspan="2" %)F6.18|AO1 the maximum input corresponds to the setting|Factory default|100.0%
--|Setting range|(% colspan="2" %)0.0% to +100.0%
++|(% rowspan="2" style="text-align:center" %)F6.15|(% style="text-align:center" %)AO1 minimum input|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00V
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00V to F6.17
++|(% rowspan="2" style="text-align:center" %)F6.16|(% style="text-align:center" %)AO1 the minimum input corresponds to the setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to +100.0%
++|(% rowspan="2" style="text-align:center" %)F6.17|(% style="text-align:center" %)AO1 maximum input|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.00V
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)F6.15 to +10.00V
++|(% rowspan="2" style="text-align:center" %)F6.18|(% style="text-align:center" %)AO1 the maximum input corresponds to the setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to +100.0%
  The above function code defines the relationship between the analog output voltage and the set value represented by the analog output. When the analog output voltage exceeds the set maximum output range, the other part will be calculated as the maximum output; when the analog output voltage exceeds the set minimum output range, the other part will be calculated according to the AO minimum output. When the analog output is a current output, 1mA current is equivalent to 0.5V voltage. In different applications, the nominal value corresponding to the simulated 100% is different, please refer to the description of each application.
--|(% rowspan="2" %)F6.19|AO2 minimum input (Extended)|Factory default|(% colspan="2" %)0.00V
--|Setting range|(% colspan="3" %)0.00V to F6.21
--|(% rowspan="2" %)F6.20|AO2 minimum Input mapping Settings (Extended)|(% colspan="2" %)Factory default|0.0%
--|Setting range|(% colspan="3" %)0.0% to +100.0%
--|(% rowspan="2" %)F6.21|AO2 maximum input (Extended)|(% colspan="2" %)Factory default|10.00V
--|Setting range|(% colspan="3" %)F6.19 to +10.00V
--|(% rowspan="2" %)F6.22|AO2 maximum input corresponding Settings (Extended)|(% colspan="2" %)Factory default|100.0%
--|Setting range|(% colspan="3" %)0.0% to +100.0%
--|(% rowspan="2" %)F6.23|FMR turn-on delay time|(% colspan="2" %)Factory default|0.0s
--|Setting range|(% colspan="3" %)0.0s to 3600.0s
++|(% rowspan="2" style="text-align:center" %)F6.19|(% style="text-align:center" %)AO2 minimum input (Extended)|(% style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)0.00V
++|(% style="text-align:center" %)Setting range|(% colspan="3" style="text-align:center" %)0.00V to F6.21
++|(% rowspan="2" style="text-align:center" %)F6.20|(% style="text-align:center" %)AO2 minimum Input mapping Settings (Extended)|(% colspan="2" style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0%
++|(% style="text-align:center" %)Setting range|(% colspan="3" style="text-align:center" %)0.0% to +100.0%
++|(% rowspan="2" style="text-align:center" %)F6.21|(% style="text-align:center" %)AO2 maximum input (Extended)|(% colspan="2" style="text-align:center" %)Factory default|(% style="text-align:center" %)10.00V
++|(% style="text-align:center" %)Setting range|(% colspan="3" style="text-align:center" %)F6.19 to +10.00V
++|(% rowspan="2" style="text-align:center" %)F6.22|(% style="text-align:center" %)AO2 maximum input corresponding Settings (Extended)|(% colspan="2" style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
++|(% style="text-align:center" %)Setting range|(% colspan="3" style="text-align:center" %)0.0% to +100.0%
++|(% rowspan="2" style="text-align:center" %)F6.23|(% style="text-align:center" %)FMR turn-on delay time|(% colspan="2" style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="3" style="text-align:center" %)0.0s to 3600.0s
  The above function code defines the relationship between the analog output voltage and the set value represented by the analog output. When the analog output voltage exceeds the set maximum output range, the other part will be calculated as the maximum output; when the analog output voltage exceeds the set minimum output range, the other part will be calculated according to the AO minimum output. When the analog output is a current output, 1mA current is equivalent to 0.5V voltage. In different applications, the nominal value corresponding to the simulated 100% is different, please refer to the description of each application.
++|(% rowspan="2" style="text-align:center" %)F6.24|(% style="text-align:center" %)Relay 1 on delay time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 3600.0s
++|(% rowspan="2" style="text-align:center" %)F6.25|(% style="text-align:center" %)Relay 2 turn-on delay time (Extended)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 3600.0s
++|(% rowspan="2" style="text-align:center" %)F6.26|(% style="text-align:center" %)VDO connection delay|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 3600.0s
++|(% rowspan="2" style="text-align:center" %)F6.27|(% style="text-align:center" %)FMR disconnect delay time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 3600.0s
++|(% rowspan="2" style="text-align:center" %)F6.28|(% style="text-align:center" %)Relay 1 disconnect delay time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 3600.0s
++|(% rowspan="2" style="text-align:center" %)F6.29|(% style="text-align:center" %)Relay 2 disconnect delay time (Extended)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 3600.0s
++|(% rowspan="2" style="text-align:center" %)F6.30|(% style="text-align:center" %)VDO1 disconnect delay|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 3600.0s
--|(% rowspan="2" %)F6.24|Relay 1 on delay time|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0s to 3600.0s
--|(% rowspan="2" %)F6.25|Relay 2 turn-on delay time (Extended)|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0s to 3600.0s
--|(% rowspan="2" %)F6.26|VDO connection delay|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0s to 3600.0s
--|(% rowspan="2" %)F6.27|FMR disconnect delay time|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0s to 3600.0s
--|(% rowspan="2" %)F6.28|Relay 1 disconnect delay time|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0s to 3600.0s
--|(% rowspan="2" %)F6.29|Relay 2 disconnect delay time (Extended)|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0s to 3600.0s
--|(% rowspan="2" %)F6.30|VDO1 disconnect delay|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0s to 3600.0s
--
  Set the delay time of output terminals FMR, relay 1, relay 2, VDO from the change of state to the change of output.
--|(% rowspan="2" %)F6.31|Output terminal valid status Select 1|Factory default|000
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F6.31|(% style="text-align:center" %)Output terminal valid status Select 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)000
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Positive logic
 : Reverse logic
@@ -1976,8 +1976,8 @@
  Thousands place: -
  )))
--|(% rowspan="2" %)F6.32|Virtual output terminal valid status Select 2|Factory default|000
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F6.32|(% style="text-align:center" %)Virtual output terminal valid status Select 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)000
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Positive logic
 : Reverse logic
@@ -1997,8 +1997,8 @@
  Inverse logic: The digital output terminal is not connected to the corresponding public end, and the disconnect is valid.
--|(% rowspan="2" %)F6.33|User-defined output selection (EX) 1|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F6.33|(% style="text-align:center" %)User-defined output selection (EX) 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : The running frequency
 : Set the frequency
@@ -2024,9 +2024,8 @@
  This parameter is used to select a reference variable for the custom output. Take the selected variable EX as the operation comparison object.
--
--|(% rowspan="2" %)F6.34|The comparison method chosen by the user 1|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F6.34|(% style="text-align:center" %)The comparison method chosen by the user 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  Units: Compare test methods
 : Equal to (EX == X1)
@@ -2050,17 +2050,17 @@
  The way the tens select the output. False value output is output if the condition is not met, and no output if it is met; Truth output is output only when the condition is met, and no output if the condition is not met.
--|(% rowspan="2" %)F6.35|User-defined dead zone 1|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535
++|(% rowspan="2" style="text-align:center" %)F6.35|(% style="text-align:center" %)User-defined dead zone 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535
  When the comparison test mode of F6.29 is set to greater than or equal to or less than or equal to, F6.30 is used to define the processing dead zone value centered on the comparison value X1. The processing dead zone has effect only on 1 and 2 of the comparison test mode of F6.29, and has no effect on 0, 3, and 4. For example, when F6.29 is set to 11, when EX is increased from 0 to greater than or equal to X1+F6.30, the output is valid; When EX is reduced to less than or equal to X1.F6.30, the output is invalid.
--|(% rowspan="2" %)F6.36|User-defined 2 outputs the comparison value X1|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535
--|(% rowspan="2" %)F6.37|User-defined 2 outputs the comparison value X2|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535
--|(% rowspan="2" %)F6.38|User-defined output selection (EX) 2|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F6.36|(% style="text-align:center" %)User-defined 2 outputs the comparison value X1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535
++|(% rowspan="2" style="text-align:center" %)F6.37|(% style="text-align:center" %)User-defined 2 outputs the comparison value X2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535
++|(% rowspan="2" style="text-align:center" %)F6.38|(% style="text-align:center" %)User-defined output selection (EX) 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Running frequency
 : Set the frequency
@@ -2090,22 +2090,22 @@
  ~1. When the set frequency is greater than or equal to 20.00HZ, the relay is closed;
--Set parameters as follows: F6.02 = 41, F6.28 = 1, F6.29 = 11, F6.30 = 0, F6.31 = 2000;
++Set parameters as follows: F6.02 = 41，F6.33 = 1，F6.34 = 11，F6.35 = 0，F6.36 = 2000;
 . When the bus voltage is less than or equal to 500.0V, the relay is closed; In order to avoid frequent operation of the relay when the detection voltage fluctuates 5.0V above and below 500.0V, it is required to process into a dead zone in the range of (500.0-5.0) to (500.0+5.0).
--Set parameters as follows: F6.02 = 41, F6.28 = 2, F6.29 = 01, F6.30 = 50, F6.31 = 5000;
++Set parameters as follows: F6.02 = 41，F6.33 = 2，F6.34 = 01，F6.35 = 50，F6.36 = 5000;
 . When the inverter is required to reverse, the relay is closed:
--Set parameters as follows: F6.02 = 41, F6.28 = 5, F6.29 = 14, F6.31 = 8, F6.32= 8;
++Set parameters as follows: F6.02 = 41，F6.33 = 2，F6.34 = 01，F6.31 = 8，F6.37= 8;
 . When AI1 input is required to be greater than 3.00V and less than or equal to 6.00V, the relay is closed:
--Set parameters as follows: F6.02 = 41, F6.28=13, F6.29=13, F6.31=300, F6.32=600; F6.33 to F6.37 is the same as F6.28 to F6.32.
++Set parameters as follows: F6.02 = 41，F6.33=13，F6.34=13，F6.36=300，F6.37=600
--|(% rowspan="2" %)F6.39|The comparison method chosen by the user 2|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F6.39|(% style="text-align:center" %)The comparison method chosen by the user 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  Units: Compare test methods
 : Equal to (EX == X1)
@@ -2124,18 +2124,17 @@
 : Truth output
  )))
--|(% rowspan="2" %)F6.40|User-defined dead zone 2|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535
--|(% rowspan="2" %)F6.41|User-defined 2 outputs the comparison value X1|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535
--|(% rowspan="2" %)F6.42|User-defined 2 Output comparison value X2|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535
++|(% rowspan="2" style="text-align:center" %)F6.40|(% style="text-align:center" %)User-defined dead zone 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535
++|(% rowspan="2" style="text-align:center" %)F6.41|(% style="text-align:center" %)User-defined 2 outputs the comparison value X1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535
++|(% rowspan="2" style="text-align:center" %)F6.42|(% style="text-align:center" %)User-defined 2 Output comparison value X2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535
  Second output. The parameter setting mode is the same as F6.33 to F6.37.
--
--|(% rowspan="2" %)F6.43|Timer time unit|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F6.43|(% style="text-align:center" %)Timer time unit|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
 : Second
 : Minute
@@ -2142,22 +2142,21 @@
 : Hour
  )))
--|(% rowspan="2" %)F6.44|Timer maximum|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535 (No more when set to 65000)
--|(% rowspan="2" %)F6.45|Timer set value|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535
--|(% rowspan="2" %)F6.46|Counter maximum|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535
--|(% rowspan="2" %)F6.47|Counter set value|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65535
++|(% rowspan="2" style="text-align:center" %)F6.44|(% style="text-align:center" %)Timer maximum|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535 (No more when set to 65000)
++|(% rowspan="2" style="text-align:center" %)F6.45|(% style="text-align:center" %)Timer set value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535
++|(% rowspan="2" style="text-align:center" %)F6.46|(% style="text-align:center" %)Counter maximum|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535
++|(% rowspan="2" style="text-align:center" %)F6.47|(% style="text-align:center" %)Counter set value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65535
  Set the timer time.
++== **F7 group keyboard with display** ==
--**F7 group keyboard with display**
--
--|(% rowspan="2" %)F7.00|LCD keyboard parameter copy|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F7.00|(% style="text-align:center; width:252px" %)LCD keyboard parameter copy|(% style="text-align:center; width:304px" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center; width:252px" %)Setting range|(% colspan="2" style="width:398px" %)(((
 : No operation is performed
 : The function parameters of the machine are uploaded to the LCD keyboard
@@ -2165,11 +2165,10 @@
 : LCD keyboard function parameters download to the machine
  )))
--**Note: LCD is not available.**
++**✎Note: LCD is not available.**
--
--|(% rowspan="2" %)F7.01|ENT key function selection|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F7.01|(% style="text-align:center; width:230px" %)ENT key function selection|(% style="text-align:center; width:314px" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center; width:230px" %)Setting range|(% colspan="2" style="width:421px" %)(((
 : ENT is invalid
 : Switch between the command channel of the operation panel and the remote command channel (the remote command channel includes communication and terminal control)
@@ -2209,8 +2209,8 @@
  Operating instructions: base for the initial menu, -C- for the debugging menu; ENT key to switch the menu, shift key to enter the corresponding menu; debugging menu displayed as CFxx.xx
--|(% rowspan="2" %)F7.02|Keyboard STOP key range|Factory default|0011
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F7.02|(% style="text-align:center" %)Keyboard STOP key range|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0011
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  LED units place: Terminal control selection
 : The terminal command is invalid
@@ -2228,10 +2228,10 @@
  LED thousands place: reserved
  )))
--**Special note:** When the STOP button communication control is valid, if the machine is started by using the communication command and the machine is stopped by using the STOP button, it can be started only after the STOP command is issued before the next communication start.
++**✎Note:** When the STOP button communication control is valid, if the machine is started by using the communication command and the machine is stopped by using the STOP button, it can be started only after the STOP command is issued before the next communication start.
--|(% rowspan="2" %)F7.03|Keyboard run displays parameter 1|Factory default|3420
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F7.03|(% style="text-align:center" %)Keyboard run displays parameter 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)3420
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  LED units place: First group display
 : Output frequency
@@ -2272,8 +2272,8 @@
  LED thousands place: Fourth group display
  )))
--|(% rowspan="2" %)F7.04|Keyboard run displays parameter 2|Factory default|0000
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F7.04|(% style="text-align:center" %)Keyboard run displays parameter 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0000
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  LED units place: First group display
 : No displayed
@@ -2308,14 +2308,14 @@
  F: Auxiliary frequency Y is displayed
--LED ten: second group display
++LED ten: Second group display
  LED hundreds place: Third group display
  LED thousands place: Fourth group display
  )))
--|(% rowspan="2" %)F7.05|Keyboard stop displays parameters|Factory default|3421
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F7.05|(% style="text-align:center" %)Keyboard stop displays parameters|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)3421
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  LED units place: First group display
 : Output frequency
@@ -2359,20 +2359,19 @@
  Control four groups of display parameters. For example, if output frequency, bus voltage, output current, and output voltage need to be displayed during operation, set the corresponding value 3420 one by one in bits to kilos.
++|(% rowspan="2" style="text-align:center" %)F7.06|(% style="text-align:center" %)Load speed display factor|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1.000
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.001 to 65.000
--|(% rowspan="2" %)F7.06|Load speed display factor|Factory default|1.000
--|Setting range|(% colspan="2" %)0.001 to 65.000
--
  Through this parameter, the output frequency of the inverter is corresponding to the load speed, load speed = output frequency /F2.04*F2.05*F7.06.
--|(% rowspan="2" %)F7.14|High cumulative power consumption|Factory default|
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F7.14|(% style="text-align:center" %)High cumulative power consumption|(% style="text-align:center" %)Factory default|
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  Power consumption = F7.14*65535+F7.15
  Unit: kWh
  )))
--|(% rowspan="2" %)F7.15|Low cumulative power consumption|Factory default|
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F7.15|(% style="text-align:center" %)Low cumulative power consumption|(% style="text-align:center" %)Factory default|
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  Power consumption=F7.14*65535+F7.15
  Unit: kWh
@@ -2380,32 +2380,29 @@
  When the inverter power is large, the 16-bit power consumption parameter will overflow quickly, so two parameters are used to represent the power consumption, that is, 32 digits.
--|(% rowspan="2" %)F7.16|Output power correction factor|Factory default|100.0%
--|Setting range|(% colspan="2" %)0 to 100.0%
++|(% rowspan="2" style="text-align:center" %)F7.16|(% style="text-align:center" %)Output power correction factor|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 100.0%
  Used to correct the actual output power of the motor.
--|(% rowspan="2" %)F7.17|Power display dimension selection|Factory default|1
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F7.17|(% style="text-align:center" %)Power display dimension selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
  to Power display percentage ~(%)
  to Power display kilowatts (kW)
  )))
--
--
  Used to select the dimension of power display D0.05, 0 is displayed in the ratio of output power to motor power, and 1 is displayed in KW.
++== **F8 group accessibility** ==
--**F8 group accessibility**
++|(% rowspan="2" style="text-align:center" %)F8.00|(% style="text-align:center" %)JOG running frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.00Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00Hz to Maximum frequency F0.10
++|(% rowspan="2" style="text-align:center" %)F8.01|(% style="text-align:center" %)JOG acceleration time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01s to 6500.0s
++|(% rowspan="2" style="text-align:center" %)F8.02|(% style="text-align:center" %)JOG deceleration time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01s to 6500.0s
--|(% rowspan="2" %)F8.00|JOG running frequency|Factory default|2.00Hz
--|Setting range|(% colspan="2" %)0.00Hz to Maximum frequency F0.10
--|(% rowspan="2" %)F8.01|JOG acceleration time|Factory default|20.0s
--|Setting range|(% colspan="2" %)0.01s to 6500.0s
--|(% rowspan="2" %)F8.02|JOG deceleration time|Factory default|20.0s
--|Setting range|(% colspan="2" %)0.01s to 6500.0s
--
  Define the given frequency and acceleration/deceleration time of the inverter during jog. The jog process starts and stops according to start mode 0 (F1.00, direct start) and stop mode 0 (F1.10, decelerate to stop).
  Jog acceleration time refers to the time required for the inverter to accelerate from 0Hz to the maximum output frequency (F0.10).
@@ -2412,39 +2412,39 @@
  Jog deceleration time refers to the time required for the inverter to decelerate from the maximum output frequency (F0.10) to 0Hz..
--|(% rowspan="2" %)F8.09|Emergency stop deceleration time|Factory default|Model determination
--|Setting range|(% colspan="2" %)0. 01s to 6500.0s
++|(% rowspan="2" style="text-align:center" %)F8.09|(% style="text-align:center" %)Emergency stop deceleration time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0. 01s to 6500.0s
  The terminal is set to downtime in case of emergency stop.
--|(% rowspan="2" %)F8.10|Jump frequency 1|Factory default|0.00Hz
--|Setting range|(% colspan="2" %)0.00Hz to Maximum frequency
--|(% rowspan="2" %)F8.11|Jump frequency 2|Factory default|0.00Hz
--|Setting range|(% colspan="2" %)0.00 Hz to Maximum frequency
--|(% rowspan="2" %)F8.12|Jump frequency amplitude|Factory default|0.01Hz
--|Setting range|(% colspan="2" %)0.00 to Maximum frequency
++|(% rowspan="2" style="text-align:center" %)F8.10|(% style="text-align:center" %)Jump frequency 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00Hz to Maximum frequency
++|(% rowspan="2" style="text-align:center" %)F8.11|(% style="text-align:center" %)Jump frequency 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 Hz to Maximum frequency
++|(% rowspan="2" style="text-align:center" %)F8.12|(% style="text-align:center" %)Jump frequency amplitude|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.01Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to Maximum frequency
  When the set frequency is within the jump frequency range, the actual running frequency will run at the jump frequency boundary closer to the set frequency. By setting the jump frequency, the VFD can avoid the mechanical resonance point of the load. The inverter can be configured with two jump frequency points. This function does not work if both jump frequencies are set to 0.
--[[image:1763107356713-939.png]]
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-8-1 Jump frequency diagram>>image:1763107356713-939.png]]
++)))
++|(% rowspan="2" style="text-align:center" %)F8.13|(% style="text-align:center" %)Reversible dead zone time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 120.0s
--Figure 9-8-1 Jump frequency diagram
--
--
--|(% rowspan="2" %)F8.13|Reversible dead zone time|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0 to 120.0s
--
  Set the transition time at the output zero frequency during the positive and negative transition of the inverter, as shown below:
--[[image:1763107356720-587.png]]
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-8-2 Reverse rotation dead zone time diagram>>image:1763107356720-587.png]]
++)))
--
--Figure 9-8-2 Reverse rotation dead zone time diagram
--
--
--|(% rowspan="2" %)F8.14|The carrier frequency is adjusted with temperature|Factory default|1
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F8.14|(% style="text-align:center" %)The carrier frequency is adjusted with temperature|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Temperature independent
 :Temperature dependent, >75, 1.0Khz
@@ -2452,8 +2452,8 @@
  Effective carrier frequency temperature adjustment means that the VFD can automatically adjust the carrier frequency according to its own temperature. Select this function to reduce the chances of VFD overheating alarm.
--|(% rowspan="2" %)F8.15|Terminal action is preferred|Factory default|1
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F8.15|(% style="text-align:center" %)Terminal action is preferred|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Invalid
 : Valid
@@ -2463,36 +2463,38 @@
 : If the running command and the point-action command exist at the same time, the point-action command takes precedence.
--|(% rowspan="2" %)F8.16|Set the cumulative power-on arrival time|Factory default|0h
--|Setting range|(% colspan="2" %)0h to 65000h
++|(% rowspan="2" style="text-align:center" %)F8.16|(% style="text-align:center" %)Set the cumulative power-on arrival time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0h
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0h to 65000h
  Pre-set the power-on time of the inverter. When the cumulative power-on time (F7.13) reaches the set power-on time, set the DO output function, and the inverter multi-function digital DO output running time arrival signal.
--|(% rowspan="2" %)F8.17|Set the cumulative run arrival time|Factory default|65000h
--|Setting range|(% colspan="2" %)0h to 65000h
++|(% rowspan="2" style="text-align:center" %)F8.17|(% style="text-align:center" %)Set the cumulative run arrival time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)65000h
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0h to 65000h
  Pre-set the running time of the inverter. When the accumulated running time (F7.09) reaches this set running time, set the DO output function, the inverter multi-functional digital DO output running time arrival signal.
--|(% rowspan="2" %)F8.20|Arrival time of this run|Factory default|0
--|Setting range|(% colspan="2" %)0 to 65000min
++|(% rowspan="2" style="text-align:center" %)F8.20|(% style="text-align:center" %)Arrival time of this run|(% style="text-align:center" %)Factory default|0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 65000min
  Set the current running time, shutdown clear zero.
--|(% rowspan="2" %)F8.22|Frequency detection value (FDT1)|Factory default|50.00Hz
--|Setting range|(% colspan="2" %)0.00Hz to Maximum frequency
--|(% rowspan="2" %)F8.23|Frequency Detection Lag value (FDT1)|Factory default|5.0%
--|Setting range|(% colspan="2" %)0.0% to 100.0%(FDT1 Electric level)
--|(% rowspan="2" %)F8.24|Frequency detection value (FDT2)|Factory default|50.00Hz
--|Setting range|(% colspan="2" %)0.00Hz to Maximum frequency
--|(% rowspan="2" %)F8.25|Frequency detection lag value (FDT2)|Factory default|5.0%
--|Setting range|(% colspan="2" %)0.0% to 100.0%(FDT2 Electric level)
++|(% rowspan="2" style="text-align:center" %)F8.22|(% style="text-align:center" %)Frequency detection value (FDT1)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50.00Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00Hz to Maximum frequency
++|(% rowspan="2" style="text-align:center" %)F8.23|(% style="text-align:center" %)Frequency Detection Lag value (FDT1)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)5.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 100.0%(FDT1 Electric level)
++|(% rowspan="2" style="text-align:center" %)F8.24|(% style="text-align:center" %)Frequency detection value (FDT2)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50.00Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00Hz to Maximum frequency
++|(% rowspan="2" style="text-align:center" %)F8.25|(% style="text-align:center" %)Frequency detection lag value (FDT2)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)5.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 100.0%(FDT2 Electric level)
  Set the detection value of the output frequency and the lag value of the output action release.
--[[image:1763107356721-853.png]]
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-8-3 Schematic diagram of FDT1 level>>image:1763107356721-853.png]]
++)))
--Figure 9-8-3 Schematic diagram of FDT1 level
--
  |(% rowspan="2" %)F8.26|Frequency reaches the detection width|Factory default|0.0%
  |Setting range|(% colspan="2" %)0.00 to 100% Maximum frequency
@@ -2500,10 +2500,12 @@
  As shown below:
--[[image:1763107356724-721.png]]
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-8-4 Schematic diagram of frequency arrival detection amplitude>>image:1763107356724-721.png]]
++)))
--Figure 9-8-4 Schematic diagram of frequency arrival detection amplitude
--
  |(% rowspan="2" %)F8.27|Arbitrary reach frequency detection value 1|Factory default|50.00Hz
  |Setting range|(% colspan="2" %)0.00Hz to Maximum frequency
  |(% rowspan="2" %)F8.28|Arbitrary arrival frequency detection amplitude 1|Factory default|0.0%
@@ -2513,83 +2513,78 @@
  |(% rowspan="2" %)F8.30|Arbitrary arrival frequency detection amplitude 2|Factory default|0.0%
  |Setting range|(% colspan="2" %)0.0% to 100.0% (Maximum frequency)
--
--
  When the output frequency of the inverter reaches the positive and negative detection amplitude of the frequency detection value 1 and 2, the output pulse signal.
  As shown below:
--[[image:1763107356727-432.png]]
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-8-5 Schematic diagram of detection of arbitrary arrival frequency>>image:1763107356727-432.png]]
++)))
--Figure 9-8-5 Schematic diagram of detection of arbitrary arrival frequency
++|(% rowspan="2" style="text-align:center" %)F8.31|(% style="text-align:center" %)Arbitrary arrival current 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0%-300.0% (Rated current of motor)
++|(% rowspan="2" style="text-align:center" %)F8.32|(% style="text-align:center" %)Arbitrary arrival current 1 width|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0%-300.0% (Rated current of motor)
++|(% rowspan="2" style="text-align:center" %)F8.33|(% style="text-align:center" %)Arbitrary arrival current 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 300.0%(Rated current of motor)
++|(% rowspan="2" style="text-align:center" %)F8.34|(% style="text-align:center" %)Arbitrary arrival current 2 width|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 300.0%(Rated current of motor)
--
--|(% rowspan="2" %)F8.31|Arbitrary arrival current 1|Factory default|100.0%
--|Setting range|(% colspan="2" %)0.0%-300.0% (Rated current of motor)
--|(% rowspan="2" %)F8.32|Arbitrary arrival current 1 width|Factory default|0.0%
--|Setting range|(% colspan="2" %)0.0%-300.0% (Rated current of motor)
--|(% rowspan="2" %)F8.33|Arbitrary arrival current 2|Factory default|100.0%
--|Setting range|(% colspan="2" %)0.0% to 300.0%(Rated current of motor)
--|(% rowspan="2" %)F8.34|Arbitrary arrival current 2 width|Factory default|0.0%
--|Setting range|(% colspan="2" %)0.0% to 300.0%(Rated current of motor)
--
--
--
  When the output current of the inverter reaches any positive or negative detection width of current 1 and 2, output pulse signal.
  As shown below:
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure. 9-8-6 Schematic diagram of detection of arbitrary arrival frequency>>image:1763107356731-567.png]]
++)))
--[[image:1763107356731-567.png]]
++|(% rowspan="2" style="text-align:center" %)F8.35|(% style="text-align:center" %)Zero current detection value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)5.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 300.0% (Rated current of motor)
++|(% rowspan="2" style="text-align:center" %)F8.36|(% style="text-align:center" %)Zero current detection delay time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 600.00s
--Figure. 9-8-6 Schematic diagram of detection of arbitrary arrival frequency
--
--|(% rowspan="2" %)F8.35|Zero current detection value|Factory default|5.0%
--|Setting range|(% colspan="2" %)0.0% to 300.0% (Rated current of motor)
--|(% rowspan="2" %)F8.36|Zero current detection delay time|Factory default|0s
--|Setting range|(% colspan="2" %)0 to 600.00s
--
--Figure 9-8-7 Schematic diagram of zero current detection
--
  When the output current of the inverter is less than or equal to the zero current detection level and the duration exceeds the zero current detection delay time, the output pulse
  Rush the signal. As shown below:
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-8-7 Schematic diagram of zero current detection>>image:1763358952427-755.png]]
++)))
--|
--| |[[image:1763107356732-988.png]]
++|(% rowspan="2" style="text-align:center" %)F8.37|(% style="text-align:center" %)Software overflow point (DO output)|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)200.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 300.0% (Rated current of VFD)
++|(% rowspan="2" style="text-align:center" %)F8.38|(% style="text-align:center" %)Software over current detection delay time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 600.00s
--
--
--|(% rowspan="2" %)F8.37|Software overflow point (DO output)|Factory default|200.0%
--|Setting range|(% colspan="2" %)0.0% to 300.0% (Rated current of VFD)
--|(% rowspan="2" %)F8.38|Software over current detection delay time|Factory default|0s
--|Setting range|(% colspan="2" %)0 to 600.00s
--
--
--
  When the output current of the inverter is greater than or equal to the software over current point and the duration exceeds the software over current point detection delay time, the output pulse
  Rush the signal. As shown below:
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-8-8 Schematic diagram of software overflow point detection>>image:1763107356734-922.png]]
++)))
--|
--| |[[image:1763107356734-922.png]]
++== **F9 group process control PID function** ==
--Figure 9-8-8 Schematic diagram of software overflow point detection
--
--
--**F9 group process control PID function**
--
  PID control is a common method used for process control. By proportional, integral and differential operations on the difference between the feedback signal of the controlled quantity and the target quantity signal, the output frequency of the inverter is adjusted to form a negative feedback system, so that the controlled quantity is stable on the target quantity. Suitable for flow control, pressure control, temperature control and other process control. The basic control block diagram is as follows:
--[[image:1763107356736-468.png]]
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-9-1 Process PID schematic diagram>>image:1763107356736-468.png]]
++)))
--Figure 9-9-1 Process PID schematic diagram
--
--|(% rowspan="2" %)F9.00|PID given source|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F9.00|(% style="text-align:center" %)PID given source|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Keyboard number PID is set to F9.01
 : AI1
@@ -2609,14 +2609,13 @@
  When the frequency source is selected PID, that is, F0.03 or F0.04 is selected 8, this set of functions works. (See function code F0.03-F0.04.) This parameter determines the target amount of the process PID for a given channel. The set target quantity of process PID is relative value, and 100% of the set value corresponds to 100% of the feedback signal of the controlled system. The range of the PID (F9.04) is not required, because the system calculates relative values (0 to 100%) regardless of the range set. However, if the PID range is set, the actual value of the PID given and feedback corresponding to the signal can be visually observed through the keyboard display parameters.
--|(% rowspan="2" %)F9.01|PID Value setting|Factory default|50.0%
--|Setting range|(% colspan="2" %)0.00 to 100.0%
++|(% rowspan="2" style="text-align:center" %)F9.01|(% style="text-align:center" %)PID Value setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 100.0%
  When F9.00=0 is selected, the target source is the keyboard given. This parameter needs to be set. The reference value of this parameter is the feedback amount of the system.
--
--|(% rowspan="2" %)F9.02|PID feedback source|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F9.02|(% style="text-align:center" %)PID feedback source|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : AI1
 : AI2
@@ -2640,14 +2640,6 @@
  This parameter is used to select the PID feedback channel.
--
--
--
--
--
--
--
--
  |(% rowspan="2" %)F9.03|PID control characteristic|Factory default|0
  |Setting range|(% colspan="2" %)(((
  LED ones digit: Feedback feature selection
@@ -2693,14 +2693,14 @@
  Center alignment: Error correction.
--|(% rowspan="2" %)F9.04|PID given feedback range|Factory default|100.0
--|Setting range|(% colspan="2" %)0 to 100.0
--|(% rowspan="2" %)F9.05|Proportional gain P1|Factory default|20.00
--|Setting range|(% colspan="2" %)0.00 to 1000.00
--|(% rowspan="2" %)F9.06|Integration time I1|Factory default|2.00s
--|Setting range|(% colspan="2" %)0.00 to 10.00s
--|(% rowspan="2" %)F9.07|D1derivative time D1|Factory default|0.00s
--|Setting range|(% colspan="2" %)0.00 to 10.00s
++|(% rowspan="2" style="text-align:center" %)F9.04|(% style="text-align:center" %)PID given feedback range|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 100.0
++|(% rowspan="2" style="text-align:center" %)F9.05|(% style="text-align:center" %)Proportional gain P1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.00
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 1000.00
++|(% rowspan="2" style="text-align:center" %)F9.06|(% style="text-align:center" %)Integration time I1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.00s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 10.00s
++|(% rowspan="2" style="text-align:center" %)F9.07|(% style="text-align:center" %)D1derivative time D1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 10.00s
  Proportional gain P1: Determines the adjustment intensity of the entire PID regulator, the greater the P, the greater the adjustment intensity. The parameter 100 indicates that when the deviation between the PID feedback quantity and the feed quantity is 100%, the PID: regulator's adjustment amplitude to the output frequency instruction is Maximum frequency (ignoring the integral and differential effects).
@@ -2708,49 +2708,40 @@
  Differential time D1: Determines the intensity with which the PID regulator adjusts the amount of PID feedback and the rate of change of the given amount of deviation. The differential time means that if the feedback quantity changes 100% in this time, the adjustment amount of the differential regulator is Maximum frequency (F0.10) (ignoring the proportional action and integral action). The longer the differential time, the greater the adjustment intensity.
--|(% rowspan="2" %)F9.08|Reverse cut-off frequency|Factory default|0.00Hz
--|Setting range|(% colspan="2" %)0.00 to Maximum frequency F0.10
--|(% rowspan="2" %)F9.09|PID deviation limit|Factory default|0.0%
--|Setting range|(% colspan="2" %)0. 0% to 100.0%
++|(% rowspan="2" style="text-align:center" %)F9.08|(% style="text-align:center" %)Reverse cut-off frequency|(% style="text-align:center" %)Factory default|0.00Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to Maximum frequency F0.10
++|(% rowspan="2" style="text-align:center" %)F9.09|(% style="text-align:center" %)PID deviation limit|(% style="text-align:center" %)Factory default|0.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0. 0% to 100.0%
--
--
  Deviation limit: When the PID feedback deviation is within this range, the PID stops adjusting.
--|(% rowspan="2" %)F9.10|PID differential limiting|Factory default|0.10%
--|Setting range|(% colspan="2" %)0.00% to 100.00%
--|(% rowspan="2" %)F9.11|PID given change time|Factory default|0.00s
--|Setting range|(% colspan="2" %)0.00s to 100.00s
++|(% rowspan="2" style="text-align:center" %)F9.10|(% style="text-align:center" %)PID differential limiting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.10%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00% to 100.00%
++|(% rowspan="2" style="text-align:center" %)F9.11|(% style="text-align:center" %)PID given change time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00s to 100.00s
--
--
  The given PID change time refers to the time required for the actual PID value to change from 0.0% to 100.0%.
  When the PID set changes, the actual value of the PID set does not follow the immediate response. And according to the given change time linear change, prevent a given mutation.
--|(% rowspan="2" %)F9.12|PID feedback filtering time|Factory default|0.00s
--|Setting range|(% colspan="2" %)0.00s to 60.00s
--|(% rowspan="2" %)F9.13|PID output filtering time|Factory default|0.00s
--|Setting range|(% colspan="2" %)0.00s to 60.00s
++|(% rowspan="2" style="text-align:center" %)F9.12|(% style="text-align:center" %)PID feedback filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00s to 60.00s
++|(% rowspan="2" style="text-align:center" %)F9.13|(% style="text-align:center" %)PID output filtering time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00s to 60.00s
--
--
  The PID feedback and output values are filtered to eliminate abrupt changes.
++|(% rowspan="2" style="text-align:center" %)F9.14|(% style="text-align:center" %)Proportional gain P2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 100.0
++|(% rowspan="2" style="text-align:center" %)F9.15|(% style="text-align:center" %)Integration time I2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.00s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01s to 10.00s
++|(% rowspan="2" style="text-align:center" %)F9.16|(% style="text-align:center" %)Differential time D2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.000s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 10.000
--|(% rowspan="2" %)F9.14|Proportional gain P2|Factory default|20.0
--|Setting range|(% colspan="2" %)0.0 to 100.0
--|(% rowspan="2" %)F9.15|Integration time I2|Factory default|2.00s
--|Setting range|(% colspan="2" %)0.01s to 10.00s
--|(% rowspan="2" %)F9.16|Differential time D2|Factory default|0.000s
--|Setting range|(% colspan="2" %)0.00 to 10.000
--
--
--
  The setting is similar to F9.05, F9.06, and F9.07. For details about how to change the PID parameters, see F9.18.
--|(% rowspan="2" %)F9.17|PID parameter switching condition|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F9.17|(% style="text-align:center" %)PID parameter switching condition|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:left" %)(((
 : No switching
 : Terminal switch
@@ -2757,10 +2757,10 @@
 : Automatically switch according to deviation
  )))
--|(% rowspan="2" %)F9.18|PID parameter switching deviation 1|Factory default|20.0%
--|Setting range|(% colspan="2" %)0.0% to F9.19
--|(% rowspan="2" %)F9.19|PID parameter switching deviation 2|Factory default|80.0%
--|Setting range|(% colspan="2" %)F9.18 to 100.0%
++|(% rowspan="2" style="text-align:center" %)F9.18|(% style="text-align:center" %)PID parameter switching deviation 1|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to F9.19
++|(% rowspan="2" style="text-align:center" %)F9.19|(% style="text-align:center" %)PID parameter switching deviation 2|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)80.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)F9.18 to 100.0%
  In some applications, a single set of PID parameters may not be sufficient for the entire operation. Multiple groups of PID parameters may need to be switched.
@@ -2770,16 +2770,15 @@
 : Automatic switching according to the deviation. When the deviation between the given and feedback is less than PID parameter switching deviation 1 (F9.19), F9.05, F9.06 and F9.07 are used as PID adjustment parameters. When the deviation between given and feedback is greater than PID switching deviation 2 (F9.20), F9.15, F9.16 and F9.17 are used as PID adjustment parameters. The PID parameters in the deviation section between switching deviation 1 and switching deviation 2 are linearly switched between the two groups of PID parameters.
--|(% rowspan="2" %)F9.20|PID initial frequency value|Factory default|0%
--|Setting range|(% colspan="2" %)0.0% to 100.0%
--|(% rowspan="2" %)F9.21|PID initial retention time|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.00s to 650.00s
++|(% rowspan="2" style="text-align:center" %)F9.20|(% style="text-align:center" %)PID initial frequency value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 100.0%
++|(% rowspan="2" style="text-align:center" %)F9.21|(% style="text-align:center" %)PID initial retention time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00s to 6500.0s
  During PID operation, the inverter first sets the output operation with the initial PID value (F9.20) and the duration is F9.21 (PID initial value holding time), and then starts the normal PID adjustment.
--
--|(% rowspan="2" %)F9.23|Feedback wire break action selection|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F9.23|(% style="text-align:center" %)Feedback wire break action selection|(% style="text-align:center" %)Factory default|0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:left" %)(((
 : PID continues to run and no fault is reported
 : Stop and report fault (manual reset)
@@ -2790,17 +2790,15 @@
 : Stop and report fault (automatic reset)
  )))
--|(% rowspan="2" %)F9.24|Wire break alarm upper limit|Factory default|100.0%
--|Setting range|(% colspan="2" %)F9.25 to 100.0%
--|(% rowspan="2" %)F9.25|Line break alarm lower limit|Factory default|0.0%
--|Setting range|(% colspan="2" %)0 to F9.24%
--|(% rowspan="2" %)F9.26|Feedback break detection time|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0s to 120.0s
++|(% rowspan="2" style="text-align:center" %)F9.24|(% style="text-align:center" %)Wire break alarm upper limit|(% style="text-align:center" %)Factory default|100.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)F9.25 to 100.0%
++|(% rowspan="2" style="text-align:center" %)F9.25|(% style="text-align:center" %)Line break alarm lower limit|(% style="text-align:center" %)Factory default|0.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to F9.24%
++|(% rowspan="2" style="text-align:center" %)F9.26|(% style="text-align:center" %)Feedback break detection time|(% style="text-align:center" %)Factory default|0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 120.0s
++Determine whether the PID feedback is lost. If the PID feedback is lower than the disconnection alarm lower limit (F9.25) or higher than the disconnection alarm upper limit (F9.24) for a duration reaching F9.26 (feedback loss detection time), the inverter will report a fault and operate according to the F9.29 setting.
--
--3 The upper limit (F9.24) duration reaches F9.26 (feedback loss detection time), the inverter reports a fault and runs according to F9.29 setting.
--
  |(% rowspan="2" %)F9.27|PID stop operation|Factory default|0
  |Setting range|(% colspan="2" %)(((
 : Disable calculation on shutdown
@@ -2818,26 +2818,27 @@
 : The inverter runs with sleep PID control, and the sleep function is enabled.
--|(% rowspan="2" %)F9.29|PID sleep threshold|Factory default|60.0%
--|Setting range|(% colspan="2" %)0.0% to 100.0%
--|(% rowspan="2" %)F9.30|PID sleep delay|Factory default|3.0s
--|Setting range|(% colspan="2" %)0.0 to 3600.0s
--|(% rowspan="2" %)F9.31|PID wake-up threshold|Factory default|20.0%
--|Setting range|(% colspan="2" %)0.0% to 100.0%
--|(% rowspan="2" %)F9.32|PID wake up delay|Factory default|3.0s
--|Setting range|(% colspan="2" %)0.0 to 3600.0s
++|(% rowspan="2" style="text-align:center" %)F9.29|(% style="text-align:center" %)PID sleep threshold|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)60.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 100.0%
++|(% rowspan="2" style="text-align:center" %)F9.30|(% style="text-align:center" %)PID sleep delay|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)3.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 3600.0s
++|(% rowspan="2" style="text-align:center" %)F9.31|(% style="text-align:center" %)PID wake-up threshold|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 100.0%
++|(% rowspan="2" style="text-align:center" %)F9.32|(% style="text-align:center" %)PID wake up delay|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)3.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 3600.0s
  When selecting the sleep PID, if the feedback is higher than the sleep threshold set by F9.29 and the running frequency is less than or equal to the sleep frequency set by F9.33, the VFD starts the sleep timing. After the sleep delay time set by F9.30, if the feedback quantity is higher than the set quantity set by F9.29 and the running frequency is less than or equal to the sleep frequency set by F9.33, Then the PID stops running and the inverter enters sleep state. If the feedback is lower than the setting of F9.31 wake-up threshold, the VFD starts the wake-up timing. After the time set by F9.32 wake-up delay, if the feedback is still lower than the setting of F9.31 wake-up threshold, the wake-up is successful and PID control is performed. Refer to Figure 9-9-2 below to understand the above parameter relationships.
--[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml14320\wps10.png]]
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-9-2 Schematic diagram of PID sleep and wake time sequence>>image:1763360417842-953.png]]
++)))
--Figure 9-9-2 Schematic diagram of PID sleep and wake time sequence
--
--
--|(% rowspan="2" %)F9.33|Dormancy detection frequency|Factory default|25.00Hz
--|Setting range|(% colspan="2" %)0 to Upper limit frequency F0.12
--|(% rowspan="2" %)F9.34|Minimum output|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F9.33|(% style="text-align:center" %)Dormancy detection frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)25.00Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to upper limit frequency F0.12
++|(% rowspan="2" style="text-align:center" %)F9.34|(% style="text-align:center" %)Minimum output|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:left" %)(((
 : F0.14 (Lower limit frequency)
 : 0Hz
@@ -2845,25 +2845,23 @@
  Sleep detection frequency: Frequency at which the system determines whether the sleep condition is met.
--|(% rowspan="2" %)F9.35|Maximum forward deviation of two outputs|Factory default|1.00%.
--|Setting range|(% colspan="2" %)0.00% to 100.00%
--|(% rowspan="2" %)F9.36|Maximum reverse deviation of two outputs|Factory default|1.00%
--|Setting range|(% colspan="2" %)0.00% to 100.00%
++|(% rowspan="2" style="text-align:center" %)F9.35|(% style="text-align:center" %)Maximum forward deviation of two outputs|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1.00%.
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00% to 100.00%
++|(% rowspan="2" style="text-align:center" %)F9.36|(% style="text-align:center" %)Maximum reverse deviation of two outputs|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1.00%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00% to 100.00%
--
--
  This function code is used to limit the difference between the PID output two beats (2ms/ beat), thereby suppress the PID output changes too fast. F9.23 and F9.24 correspond to the maximum output deviation for forward and reverse rotation respectively.
--|(% rowspan="2" %)F9.38|PID preset switchover condition selection|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F9.38|(% style="text-align:center" %)PID preset switchover condition selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:left" %)(((
 : Time
 : Switch according to AI1 feedback value
  )))
--|(% rowspan="2" %)F9.39|PID AI feedback switching minimum|Factory default|45.0%
--|Setting range|(% colspan="2" %)0.0 to F8.18
--|(% rowspan="2" %)F9.40|PID AI feedback switching maximum|Factory default|55.0%
--|Setting range|(% colspan="2" %)F8.17 to 100.0%
++|(% rowspan="2" style="text-align:center" %)F9.39|(% style="text-align:center" %)PID AI feedback switching minimum|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)45.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to F8.18
++|(% rowspan="2" style="text-align:center" %)F9.40|(% style="text-align:center" %)PID AI feedback switching maximum|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)55.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)F8.17 to 100.0%
  PID preset switching condition selection: Switch from preset output frequency (F9.20) to PID given.
@@ -2871,10 +2871,10 @@
 : Switch when the feedback value is greater than or equal to F9.23 and less than or equal to F9.24.
--**FA group failure and protection**
++== **FA group failure and protection** ==
--|(% rowspan="2" %)FA.00|Motor overload protection selection|Factory default|1
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FA.00|(% style="text-align:center" %)Motor overload protection selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Off
 : On
@@ -2884,18 +2884,18 @@
  Select 1: At this time, the inverter has overload protection function for the motor. See FA.01 for protection values.
--|(% rowspan="2" %)FA.01|Motor overload protection factor|Factory default|100.0%
--|Setting range|(% colspan="2" %)0.0 to 250.0%
++|(% rowspan="2" style="text-align:center" %)FA.01|(% style="text-align:center" %)Motor overload protection factor|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 250.0%
  Motor overload protection is inverse time curve; 220% x (FA.01) x rated motor current for 1 minute, 150% x (FA.01) x rated motor current for 60 minutes.
--|(% rowspan="2" %)FA.02|Motor overload warning factor|Factory default|80.0%
--|Setting range|(% colspan="2" %)20.0 to 250.0%
++|(% rowspan="2" style="text-align:center" %)FA.02|(% style="text-align:center" %)Motor overload warning factor|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)80.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)20.0 to 250.0%
  The reference for this value is the overload current of the motor. When the inverter detects that the output current reaches (FA.02) x the motor overload current and continues for the specified time in the inverse time curve, the forecast alarm is output from the DO or relay.
--|(% rowspan="2" %)FA.03|Over voltage stall/over loss rate control options|Factory default|1111
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FA.03|(% style="text-align:center; width:361px" %)Over voltage stall/over loss rate control options|(% style="text-align:center; width:200px" %)Factory default|(% style="text-align:center" %)1111
++|(% style="text-align:center; width:361px" %)Setting range|(% colspan="2" style="width:331px" %)(((
 : Off
 : On
@@ -2925,30 +2925,26 @@
  This bit is used to set how the frequency increases when over current suppression is withdrawn. When set to 0, the frequency is accelerated according to the acceleration time; When set to 1, the frequency is controlled by the current, so as the current decreases, the frequency will rise rapidly.
++|(% rowspan="2" style="text-align:center" %)FA.04|(% style="text-align:center" %)Over pressure suppression point|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model-based setting
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)110% to 150%
++|(% rowspan="2" style="text-align:center" %)FA.05|(% style="text-align:center" %)Udc control voltage loop gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.00
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 50.00
++|(% rowspan="2" style="text-align:center" %)FA.06|(% style="text-align:center" %)Udc control current loop gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.00
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 50.00
--|(% rowspan="2" %)FA.04|Over pressure suppression point|Factory default|Model-based setting
--|Setting range|(% colspan="2" %)110% to 150%
--|(% rowspan="2" %)FA.05|Udc control voltage loop gain|Factory default|2.00
--|Setting range|(% colspan="2" %)0.00 to 50.00
--|(% rowspan="2" %)FA.06|Udc control current loop gain|Factory default|2.00
--|Setting range|(% colspan="2" %)0.00 to 50.00
--
  When the bus voltage exceeds FA.04× rated bus voltage during the operation of the VFD, the VFD will automatically adjust the operating frequency to suppress the bus voltage rise, so as to ensure that the VFD will not cause over voltage protection due to the high bus voltage. FA.05 and FA.06 are the voltage loop gain and current loop gain when the bus voltage is regulated, respectively. Instantaneous stop of the voltage loop and current loop gain is also the reference number.
++|(% rowspan="2" style="text-align:center" %)FA.07|(% style="text-align:center" %)Over current suppression point|(% style="text-align:center" %)Factory default|150%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)50% to 200%
++|(% rowspan="2" style="text-align:center" %)FA.08|(% style="text-align:center" %)Over current suppression gain|(% style="text-align:center" %)Factory default|2.00
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 50.00
++|(% rowspan="2" style="text-align:center" %)FA.09|(% style="text-align:center" %)Over current suppression integral|(% style="text-align:center" %)Factory default|4.00
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 50.00
--|(% rowspan="2" %)FA.07|Over current suppression point|Factory default|150%
--|Setting range|(% colspan="2" %)50% to 200%
--|(% rowspan="2" %)FA.08|Over current suppression gain|Factory default|2.00
--|Setting range|(% colspan="2" %)0.00 to 50.00
--|(% rowspan="2" %)FA.09|Over current suppression integral|Factory default|4.00
--|Setting range|(% colspan="2" %)0.00 to 50.00
--
--
--
  When controlling the motor, the motor current increases with the increase of load, and the over current suppression gain function limits the maximum current of the motor. When the current reaches the rated current of FA.07* inverter, the output frequency automatically decreases to limit the motor current not exceeding the current set by FA.07; FA.08 and FA.09 are over current suppression controller parameters. Adjusting these two parameters can improve and optimize the over current suppression effect.
--|(% rowspan="2" %)FA.10|Power-on short-circuit detection to the ground|Factory default|1
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FA.10|(% style="text-align:center" %)Power-on short-circuit detection to the ground|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
 : Invalid
 : Valid
@@ -2956,8 +2956,8 @@
  The inverter can be selected to detect whether the motor has a ground protection short circuit fault when it is powered on. If this function is effective, the inverter is output for a short time at the moment of power-on.
--|(% rowspan="2" %)FA.11|Input phase loss protection|Factory default|1
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FA.11|(% style="text-align:center" %)Input phase loss protection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
 : Off
 : On
@@ -2965,8 +2965,8 @@
  Select whether to protect against input phase loss.
--|(% rowspan="2" %)FA.12|Output phase loss protection|Factory default|1
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FA.12|(% style="text-align:center" %)Output phase loss protection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
 : Off
 : On
@@ -2974,13 +2974,13 @@
  Select whether to protect output phase loss.
--|(% rowspan="2" %)FA.13|Input phase loss protection software detection level|Factory default|15.0%
--|Setting range|(% colspan="2" %)0.0 to 999.9%
++|(% rowspan="2" style="text-align:center" %)FA.13|(% style="text-align:center" %)Input phase loss protection software detection level|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)15.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 to 999.9%
  The input missing phase is judged by calculating the fluctuation of bus voltage. This parameter is used to set the threshold of bus voltage fluctuation when the input phase is out. Turning down can increase the sensitive zero of the input phase out, and turning up can reduce the probability of false positive of the input phase out.
--|(% rowspan="2" %)FA.14|PWM Parameter setting|Factory default|0010
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FA.14|(% style="text-align:center" %)PWM Parameter setting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0010
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  LED units place: Turn on voltage prediction compensation
  LED tens place: PWM update mode
@@ -2989,7 +2989,7 @@
 : Double sample and double update
--LED hundreds place: random carrier mode
++LED hundreds place: Random carrier mode
 : Random carrier
@@ -3002,14 +3002,14 @@
  LED tens place: PWM update mode.
--0: single sample update. 1: Double sample and double update.
++0: Single sample update. 1: Double sample and double update.
--LED hundreds place: random carrier mode.
++LED hundreds place: Random carrier mode.
 : Random PWM carrier frequency. 1: Random 0 vector.
--|(% rowspan="2" %)FA.15|Hardware current and voltage protection|Factory default|0011
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FA.15|(% style="text-align:center" %)Hardware current and voltage protection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0011
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  LED units place: Current limiting (CBC)
 : Off
@@ -3031,7 +3031,7 @@
 : Disable CBC current limiting  1: Enable CBC current limiting
--LED tens place: reserved.
++LED tens place: Reserved.
  LED hundreds place: FAU filtering time.
@@ -3041,33 +3041,30 @@
  The TZ signal is an over current signal. This parameter is used to set the filtering time of the TZ signal.
--|(% rowspan="2" %)FA.16|CBC protection point|Factory default|200%
--|Setting range|(% colspan="2" %)100 to 220%
--|(% rowspan="2" %)FA.17|CBC overload protection time|Factory default|500ms
--|Setting range|(% colspan="2" %)1 to 5000ms
++|(% rowspan="2" style="text-align:center" %)FA.16|(% style="text-align:center" %)CBC protection point|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)200%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)100 to 220%
++|(% rowspan="2" style="text-align:center" %)FA.17|(% style="text-align:center" %)CBC overload protection time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)500ms
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)1 to 5000ms
--
--
  When the motor current is higher than the rated current of FA.16*VFD, the per-wave current limiting starts. If the per-wave current limiting duration exceeds the time set in FA.17, the VFD reports Err. This parameter is used to set the per-wave current limiting current and fault response time.
--|(% rowspan="2" %)FA.18|Under voltage point setting|Factory default|100.0%
--|Setting range|(% colspan="2" %)100 to 220%
++|(% rowspan="2" style="text-align:center" %)FA.18|(% style="text-align:center" %)Under voltage point setting|(% style="text-align:center" %)Factory default|100.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)40.0% to 100.0%
  Adjusting this parameter can adjust the voltage point of the VFD reporting the under voltage fault (Err09), 100.0% corresponds to 350V.
--|(% rowspan="2" %)FA.20|Times of self-recovery|Factory default|0
--|Setting range|(% colspan="2" %)0 to 5
++|(% rowspan="2" style="text-align:center" %)FA.20|(% style="text-align:center" %)Times of self-recovery|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 5
  When the inverter selects fault automatic reset, it is used to set the number of times that can be automatically reset. If the value exceeds this value, the inverter is faulty and waiting for repair.
--|(% rowspan="2" %)FA.21|Interval for fault self-recovery|Factory default|1.0s
--|Setting range|(% colspan="2" %)0.1 to 100.0ms
++|(% rowspan="2" style="text-align:center" %)FA.21|(% style="text-align:center" %)Interval for fault self-recovery|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1 to 100.0ms
  VFD from fault alarm to automatic reset fault waiting time.
--
--|(% rowspan="2" %)FA.22|Instant stop non-stop function selection|Factory default|0000
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FA.22|(% style="text-align:center" %)Instant stop non-stop function selection|(% style="text-align:center" %)Factory default|0000
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  One place: Power loss ride-through enabled
 : Disabled
@@ -3081,8 +3081,6 @@
 : Stop
  )))
--
--
  Ones place: Power loss ride-through enabled
 : Disable power loss ride-through . 1: Enable power loss ride-through.
@@ -3095,28 +3095,29 @@
 : Shut down immediately
--|(% rowspan="2" %)FA.23|Power loss ride-through voltage threshold|Factory default|75%
--|Setting range|(% colspan="2" %)40% to 150%
--|(% rowspan="2" %)FA.24|Power loss ride-through stable voltage|Factory default|95%
--|Setting range|(% colspan="2" %)60% to 150%
++|(% rowspan="2" style="text-align:center" %)FA.23|(% style="text-align:center" %)Power loss ride-through voltage threshold|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)75%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)40% to 150%
++|(% rowspan="2" style="text-align:center" %)FA.24|(% style="text-align:center" %)Power loss ride-through stable voltage|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)95%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)60% to 150%
  When the input power is reduced or power off, the inverter can control the motor speed down to feedback energy to avoid the VFD under voltage fault, the function is called power loss ride-through . When the bus voltage is lower than the rated bus voltage *FA.24, The power loss ride-through function is active. and control the motor to feedback energy to stabilize the bus voltage at the rated bus voltage *FA.24.
++== **FB group swing frequency, fixed length and counting** ==
--**FB group swing frequency, fixed length and counting**
--
  Swing frequency function is suitable for textile, chemical fiber and other industries and need transverse movement, winding function occasions.
  The function of swing frequency means that the output frequency of the inverter swings up and down with the set frequency as the center.
--[[image:1763107356738-341.png]]
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-B-1 Schematic diagram of swing frequency operation>>image:1763107356738-341.png]]
++)))
--Figure 9-B-1 Schematic diagram of swing frequency operation
++|(% rowspan="2" style="text-align:center" %)FB.00|(% style="text-align:center" %)Swing frequency control|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
++LED ones digit: Swing frequency control
--|(% rowspan="2" %)FB.00|Swing frequency control|Factory default|0
--|Setting range|(% colspan="2" %)(((
--LED ones diigt: Swing frequency control
--
 : The swing frequency control is disable
 : Swing frequency control is effective
@@ -3136,7 +3136,7 @@
  LED thousands digit: Reserved
  )))
--LED ones diigt: Swing frequency control enable
++LED ones digit: Swing frequency control enable
  LED tens digit:
@@ -3148,14 +3148,14 @@
 : Fixed amplitude, relative to maximum frequency (F0.10 maximum output frequency), it is a fixed amplitude system.
--|(% rowspan="2" %)FB.01|Swing preset frequency|Factory default|0.00Hz
--|Setting range|(% colspan="2" %)0.00 to Maximum frequency
--|(% rowspan="2" %)FB.02|Preset frequency duration|Factory default|0.00s
--|Setting range|(% colspan="2" %)0.00 to 650.00s
--|(% rowspan="2" %)FB.03|Swing amplitude|Factory default|0.0%
--|Setting range|(% colspan="2" %)0.0% to 100.0%
--|(% rowspan="2" %)FB.04|Jump frequency amplitude|Factory default|0.0%
--|Setting range|(% colspan="2" %)0.0% to 50.0%
++|(% rowspan="2" style="text-align:center" %)FB.01|(% style="text-align:center" %)Swing preset frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to Maximum frequency
++|(% rowspan="2" style="text-align:center" %)FB.02|(% style="text-align:center" %)Preset frequency duration|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 650.00s
++|(% rowspan="2" style="text-align:center" %)FB.03|(% style="text-align:center" %)Swing amplitude|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 100.0%
++|(% rowspan="2" style="text-align:center" %)FB.04|(% style="text-align:center" %)Jump frequency amplitude|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 50.0%
  The value of swing amplitude and jump frequency can be determined by this parameter. The operating frequency of swing frequency is constrained by the upper and lower frequency.
@@ -3169,30 +3169,23 @@
  If the swing is selected relative to the Maximum frequency (fixed swing, select FB.00=1), the jog frequency is fixed.
++|(% rowspan="2" style="text-align:center" %)FB.05|(% style="text-align:center" %)Swing frequency rise time|(% style="text-align:center" %)Factory default|5.00s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 650.00s
++|(% rowspan="2" style="text-align:center" %)FB.06|(% style="text-align:center" %)Swing frequency drop time|(% style="text-align:center" %)Factory default|5.00s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 650.00s
--|(% rowspan="2" %)FB.05|Swing frequency rise time|Factory default|5.00s
--|Setting range|(% colspan="2" %)0.00 to 650.00s
--|(% rowspan="2" %)FB.06|Swing frequency drop time|Factory default|5.00s
--|Setting range|(% colspan="2" %)0.00 to 650.00s
--
--
--
  Triangle wave rise time = swing frequency duration FB.02× delta wave rise time coefficient FB.05 (unit: s).
  Triangle wave fall time = swing frequency duration FB.02× (1- triangle wave rise time coefficient FB.06) (unit: s).
++== **FC Group communication parameters** ==
++|(% rowspan="2" style="text-align:center" %)FC.00|(% style="text-align:center" %)Local address|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)1
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)1 to 247, 0 is the broadcast address
--
--
--**FC Group communication parameters**
--
--|(% rowspan="2" %)FC.00|Local address|Factory default|1
--|Setting range|(% colspan="2" %)1 to 247, 0 is the broadcast address
--
  When the local address is set to 0, it is the broadcast address, and the host computer broadcast function is realized. The local address is unique (except the broadcast address), which is the basis of point-to-point communication between the host computer and the inverter.
--|(% rowspan="2" %)FC.01|Baud rate|Factory default|5
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FC.01|(% style="text-align:center" %)Baud rate|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)5
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : 300 bps
 : 600 bps
@@ -3216,8 +3216,8 @@
  This parameter is used to set the data transmission rate between the host computer and the VFD. Note that the baud rate set by the upper computer and the VFD must be consistent, otherwise, communication cannot be carried out. The higher the baud rate, the faster the communication speed.
--|(% rowspan="2" %)FC.02|Modbus data format|Factory default|3
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FC.02|(% style="text-align:center" %)Modbus data format|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)3
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : (8.N.2) 8 bits, no parity, 2 stop bits
 : (8.E.1) 8 bits, even parity, 1 stop bit
@@ -3229,22 +3229,20 @@
  The data format set by the upper computer and the inverter must be consistent, otherwise, the communication cannot be carried out.
--|(% rowspan="2" %)FC.03|Modbus Communication response delay|Factory default|2ms
--|Setting range|(% colspan="2" %)0 to 20ms
++|(% rowspan="2" style="text-align:center" %)FC.03|(% style="text-align:center" %)Modbus Communication response delay|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2ms
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 20ms
  Response delay: the intermediate interval between the end of the VFD data acceptance and the sending of data to the upper machine. If the response delay is less than the system processing time, the response delay is based on the system processing time. If the response delay is longer than the system processing time, the system will wait until the response delay time reaches the upper computer before sending the data.
++|(% rowspan="2" style="text-align:center" %)FC.04|(% style="text-align:center" %)Modbus Communication timeout time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 s(In vain), 0.1 to 60.0s
--|(% rowspan="2" %)FC.04|Modbus Communication timeout time|Factory default|0.0s
--|Setting range|(% colspan="2" %)0.0 s(In vain), 0.1-60.0s
--
  When the function code is set to 0.0s, the communication timeout parameter is invalid.
  When this function code is set to valid value, if the interval between one communication and the next communication exceeds the communication timeout period, the system reports a communication fault error (Err16). Usually, this is set to invalid. If you set the next parameter in a continuous communication system, you can monitor the communication status.
++== **FD Group multi-speed function and simple PLC function** ==
--**FD Group multi-speed function and simple PLC function**
--
  Simple PLC function is the inverter built-in a programmable controller (PLC) to complete the automatic control of multi-segment frequency logic. Operation time, operation direction and operation frequency can be set to meet the requirements of the process. This series of inverter can realize 16 speed change control, there are 4 kinds of acceleration and deceleration time to choose. When the set PLC completes a cycle, an ON signal can be output by the multifunctional digital output terminal DO1, DO2 or the multifunctional relay relay 1, relay 2. See F1.02 to F1.05 for details. When the frequency source F0.07, F0.03, F0.04 is selected to determine the multi-speed operation mode, FD.00 to FD.15 needs to be set to determine its characteristics.
  |(% rowspan="2" %)FD.00|Multi-segment speed instruction 0|Factory default|0
@@ -3329,73 +3329,72 @@
  PLC shutdown retention: Record the operating stage and operating frequency of the previous PLC during shutdown.
--
--|(% rowspan="2" %)FD.18|PLC stage 0 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.19|PLC phase 0 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0to 3
--|(% rowspan="2" %)FD.20|PLC stage 1 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.21|PLC phase 1 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0to 3
--|(% rowspan="2" %)FD.22|PLC stage 2 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.23|PLC phase 2 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0to 3
--|(% rowspan="2" %)FD.24|PLC stage 3 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.25|PLC phase 3 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0to 3
--|(% rowspan="2" %)FD.26|PLC stage 4 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.27|PLC phase 4 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0to 3
--|(% rowspan="2" %)FD.28|PLC stage 5 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h)-6553.5s(h)
--|(% rowspan="2" %)FD.29|PLC phase 5 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0to 3
--|(% rowspan="2" %)FD.30|PLC stage 6 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.31|PLC phase 6 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0to 3
--|(% rowspan="2" %)FD.32|PLC stage 7 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.33|PLC phase 7 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0to 3
--|(% rowspan="2" %)FD.34|PLC stage 8 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.35|PLC phase 8 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0to 3
--|(% rowspan="2" %)FD.36|PLC stage 9 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.37|PLC phase 9 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0 to 3
--|(% rowspan="2" %)FD.38|PLC stage 10 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0 s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.39|PLC phase 10 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0 to 3
--|(% rowspan="2" %)FD.40|PLC stage 11 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.41|PLC phase 11 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0 to 3
--|(% rowspan="2" %)FD.42|PLC stage 12 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.43|PLC phase 12 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0 to 3
--|(% rowspan="2" %)FD.44|PLC stage 13 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.45|PLC phase 13 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0 to 3
--|(% rowspan="2" %)FD.46|PLC stage 14 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.47|PLC phase 14 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0 to 3
--|(% rowspan="2" %)FD.48|PLC stage 15 operation time|Factory default|0.0s(h)
--|Setting range|(% colspan="2" %)0.0s(h) to 6553.5s(h)
--|(% rowspan="2" %)FD.49|PLC phase 15 acceleration and deceleration time selection|Factory default|0
--|Setting range|(% colspan="2" %)0 to 3
--|(% rowspan="2" %)FD.50|PLC operating time unit|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FD.18|(% style="text-align:center" %)PLC stage 0 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.19|(% style="text-align:center" %)PLC phase 0 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0to 3
++|(% rowspan="2" style="text-align:center" %)FD.20|(% style="text-align:center" %)PLC stage 1 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.21|(% style="text-align:center" %)PLC phase 1 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0to 3
++|(% rowspan="2" style="text-align:center" %)FD.22|(% style="text-align:center" %)PLC stage 2 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.23|(% style="text-align:center" %)PLC phase 2 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0to 3
++|(% rowspan="2" style="text-align:center" %)FD.24|(% style="text-align:center" %)PLC stage 3 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.25|(% style="text-align:center" %)PLC phase 3 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0to 3
++|(% rowspan="2" style="text-align:center" %)FD.26|(% style="text-align:center" %)PLC stage 4 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.27|(% style="text-align:center" %)PLC phase 4 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0to 3
++|(% rowspan="2" style="text-align:center" %)FD.28|(% style="text-align:center" %)PLC stage 5 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h)-6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.29|(% style="text-align:center" %)PLC phase 5 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0to 3
++|(% rowspan="2" style="text-align:center" %)FD.30|(% style="text-align:center" %)PLC stage 6 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.31|(% style="text-align:center" %)PLC phase 6 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0to 3
++|(% rowspan="2" style="text-align:center" %)FD.32|(% style="text-align:center" %)PLC stage 7 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.33|(% style="text-align:center" %)PLC phase 7 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0to 3
++|(% rowspan="2" style="text-align:center" %)FD.34|(% style="text-align:center" %)PLC stage 8 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.35|(% style="text-align:center" %)PLC phase 8 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0to 3
++|(% rowspan="2" style="text-align:center" %)FD.36|(% style="text-align:center" %)PLC stage 9 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.37|(% style="text-align:center" %)PLC phase 9 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 3
++|(% rowspan="2" style="text-align:center" %)FD.38|(% style="text-align:center" %)PLC stage 10 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0 s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.39|(% style="text-align:center" %)PLC phase 10 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 3
++|(% rowspan="2" style="text-align:center" %)FD.40|(% style="text-align:center" %)PLC stage 11 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.41|(% style="text-align:center" %)PLC phase 11 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 3
++|(% rowspan="2" style="text-align:center" %)FD.42|(% style="text-align:center" %)PLC stage 12 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.43|(% style="text-align:center" %)PLC phase 12 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 3
++|(% rowspan="2" style="text-align:center" %)FD.44|(% style="text-align:center" %)PLC stage 13 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.45|(% style="text-align:center" %)PLC phase 13 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 3
++|(% rowspan="2" style="text-align:center" %)FD.46|(% style="text-align:center" %)PLC stage 14 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.47|(% style="text-align:center" %)PLC phase 14 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 3
++|(% rowspan="2" style="text-align:center" %)FD.48|(% style="text-align:center" %)PLC stage 15 operation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s(h)
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s(h) to 6553.5s(h)
++|(% rowspan="2" style="text-align:center" %)FD.49|(% style="text-align:center" %)PLC phase 15 acceleration and deceleration time selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 3
++|(% rowspan="2" style="text-align:center" %)FD.50|(% style="text-align:center" %)PLC operating time unit|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
  LED units: Timing unit
 : s(seconds)
@@ -3404,8 +3404,8 @@
 : min(minutes)
  )))
--|(% rowspan="2" %)FD.51|Multi-segment speed instruction 0 given mode|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)FD.51|(% style="text-align:center" %)Multi-segment speed instruction 0 given mode|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Function code FD.00 given
 : AI1

1763358952427-755.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Iris

Size

...	...	@@ -1,0 +1,1 @@
	1	+637.5 KB

Content

1763360417842-953.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Iris

Size

...	...	@@ -1,0 +1,1 @@
	1	+32.9 KB

Content

wps2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Iris

Size

...	...	@@ -1,0 +1,1 @@
	1	+418.7 KB

Content

Changes for page 09 Function code

Summary

Details

Navigation

Table of Contents