Changes for page 09 Function code

Last modified by Iris on 2025/11/17 14:59

From 2.1 to 3.1 From 5.1 to 6.1

From version 3.1

edited by Iris
on 2025/11/13 16:49

Change comment: There is no comment for this version

To version 5.1

edited by Iris
on 2025/11/13 17:32

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 1 added, 0 removed)
- 1763024398600-482.png

Details

Page properties

Content

@@ -128,13 +128,13 @@
  The secondary frequency source Y is used in the same way as the primary frequency source X when it is used as an independent frequency given channel (that is, the frequency source selected to switch from X to Y).
  |(% rowspan="2" style="text-align:center" %)F0.05|(% style="width:344px" %)The auxiliary frequency source Y range is selected during superposition|(% style="text-align:center; width:142px" %)Factory default|(% style="text-align:center" %)0
--|(% style="width:344px" %)Setting range|(% colspan="2" style="width:228px" %)(((
++|(% style="text-align:center; width:344px" %)Setting range|(% colspan="2" style="width:228px" %)(((
 : Relative to the maximum frequency  F0.10
 : Relative to the frequency source X
  )))
--|(% rowspan="2" style="text-align:center" %)F0.06|(% style="width:344px" %)Auxiliary frequency source Y range in superposition|(% style="text-align:center; width:142px" %)Factory default|100%
--|(% style="width:344px" %)Setting range|(% colspan="2" style="text-align:center; width:228px" %)0% to 150%
++|(% rowspan="2" style="text-align:center" %)F0.06|(% style="width:344px" %)Auxiliary frequency source Y range in superposition|(% style="text-align:center; width:142px" %)Factory default|(% style="text-align:center" %)100%
++|(% style="text-align:center; width:344px" %)Setting range|(% colspan="2" style="text-align:center; width:228px" %)0% to 150%
  When the frequency source is selected as a frequency stack (F0.07 is set to 1, 3, or 4), it is used to determine the adjustment range of the auxiliary frequency source. F0.05 is used to determine the object relative to the range, if it is relative to the maximum frequency (F0.10), the range is a fixed value; If it is relative to the primary frequency source X, its range will change as the primary frequency source X changes.
@@ -332,8 +332,8 @@
  (% style="text-align:center" %)
  (((
--(% style="display:inline-block" %)
--[[Figure 9-0-1 Acceleration and deceleration time>>image:1763022803632-610.png]]
++(% style="display:inline-block; width:616px;" %)
++[[Figure 9-0-1 Acceleration and deceleration time>>image:1763022803632-610.png||height="370" width="616"]]
  )))
  Note the difference between the actual acceleration and deceleration time and the set acceleration and deceleration time.
@@ -420,7 +420,6 @@
  Speed control: Below 45°C: Operate at 50% speed; From 45°C to 50°C: Operate at 75% speed; At 50°C and above: Operate at 100% speed.
--
  |(% rowspan="2" style="text-align:center" %)F0.26|(% style="text-align:center" %)Frequency command decimal point|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2
  |(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
 : 1 decimal places
@@ -481,9 +481,7 @@
  |(% rowspan="2" style="text-align:center" %)F1.03|(% style="text-align:center" %)Speed tracking current loop gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)10.00
  |(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 10.00
  |(% rowspan="2" style="text-align:center" %)F1.04|(% style="text-align:center" %)(((
--RPM tracking
--
--speed gain
++RPM tracking speed gain
  )))|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)2.00
  |(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01 to 10.00
@@ -534,32 +534,31 @@
  |(% rowspan="2" style="text-align:center" %)F1.14|(% style="text-align:center" %)Stop DC braking duration|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.0s
  |(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0s to 100.0s
--
--
  DC braking start frequency: slow down the stopping process. When the output frequency is less than this frequency, the DC braking process starts to stop.
--Dc braking waiting time: When the output frequency is reduced to F1.11 DC braking starting frequency, the inverter stops output and starts timing. After the delay time set by F1.12, DC braking starts again. Used to prevent over current failure caused by DC braking at high speeds.
++DC braking waiting time: When the output frequency is reduced to F1.11 DC braking starting frequency, the inverter stops output and starts timing. After the delay time set by F1.12, DC braking starts again. Used to prevent over current failure caused by DC braking at high speeds.
  Stop DC braking current: refers to the amount of DC braking applied. The greater the value, the stronger the DC braking effect.
  DC braking time: the time added to the DC braking amount. When this value is 0, it means that there is no DC braking process, and the inverter stops according to the set deceleration stop process.
--[[image:1763022599082-487.png]]
++(% style="text-align:center" %)
++(((
++(% style="display:inline-block" %)
++[[Figure 9-1-1 Shutdown DC braking diagram>>image:1763024398600-482.png]]
++)))
--Figure 9-1-1 Shutdown DC braking diagram
++|(% rowspan="2" style="text-align:center" %)F1.16|(% style="text-align:center" %)Energy consumption brake action voltage|(% style="text-align:center" %)Factory default|Model-based setting
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)115.0% to 140.0%
--
--|(% rowspan="2" %)F1.16|Energy consumption brake action voltage|Factory default|Model-based setting
--|Setting range|(% colspan="2" %)115.0% to 140.0%
--
  Set the brake resistance operating voltage. When the relative value of the bus voltage is higher than this value, the brake resistance starts braking.
--|(% rowspan="2" %)F1.17|Magnetic flux braking gain|Factory default|80%
--|Setting range|(% colspan="2" %)10% to 500%
--|(% rowspan="2" %)F1.18|Magnetic flux braking operating voltage|Factory default|Model-based setting
--|Setting range|(% colspan="2" %)110% to 150%
--|(% rowspan="2" %)F1.19|Flux brake limiting|Factory default|20%
--|Setting range|(% colspan="2" %)0 to 200%
++|(% rowspan="2" style="text-align:center" %)F1.17|(% style="text-align:center" %)Magnetic flux braking gain|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)80%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)10% to 500%
++|(% rowspan="2" style="text-align:center" %)F1.18|(% style="text-align:center" %)Magnetic flux braking operating voltage|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model-based setting
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)110% to 150%
++|(% rowspan="2" style="text-align:center" %)F1.19|(% style="text-align:center" %)Flux brake limiting|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0 to 200%
  When the motor decelerates the feedback energy, opening the flux brake can consume the feedback energy on the motor, so as to achieve rapid deceleration of the motor. This function is only effective in asynchronous motor VF control, and turning on this function will correspondingly increase motor loss and motor temperature rise.
@@ -569,43 +569,36 @@
  Flux brake limiting: The upper limit of the flux brake voltage, which may cause the output current of the inverter to be too high.
--|(% rowspan="2" %)F1.20|Acceleration and deceleration selection|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F1.20|Acceleration and deceleration selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Straight line
 : S curve
  )))
--
--
 : Straight line, generally suitable for general purpose load.
 : S-curve, S-type acceleration and deceleration curve is mainly provided for the load that needs to slow down noise and vibration during acceleration and deceleration, reduce start-stop impact, or decrease torque at low frequency, and short-time acceleration at high frequency. If an over current or over load failure occurs at startup, reduce the set value of [F1.21].
++|(% rowspan="2" style="text-align:center" %)F1.21|(% style="text-align:center" %)S-curve initial acceleration rate|(% style="text-align:center" %)Factory default|50.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)20.0% to 100.0%
++|(% rowspan="2" style="text-align:center" %)F1.22|(% style="text-align:center" %)S-curve initial deceleration rate|(% style="text-align:center" %)Factory default|50.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)20.0% to 100.0%
--|(% rowspan="2" %)F1.21|S-curve initial acceleration rate|Factory default|50.0%
--|Setting range|(% colspan="2" %)20.0%-100.0%
--|(% rowspan="2" %)F1.22|S-curve initial deceleration rate|Factory default|50.0%
--|Setting range|(% colspan="2" %)20.0%-100.0%
--
  S-curve Initial acceleration rate: The rate at which the acceleration process begins to increase in frequency. The smaller the initial acceleration rate, the more curved the S-curve of the acceleration process, whereas the larger the initial acceleration rate, the closer the acceleration S-curve to a straight line. To make the acceleration curve softer, you can reduce the initial acceleration rate and extend the acceleration time.
--|(% rowspan="2" %)F1.23|Zero speed holding torque|Factory default|0
--|Setting range|(% colspan="2" %)0.0% to 150.0%
++|(% rowspan="2" style="text-align:center" %)F1.23|(% style="text-align:center" %)Zero speed holding torque|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.0% to 150.0%
--
--
  Set the output torque of the inverter at zero speed. If the torque setting is large or the duration is long, attention should be paid to the heat dissipation of the motor.
--|(% rowspan="2" %)F1.24|Zero speed holding torque time|Factory default|Model setting
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F1.24|(% style="text-align:center" %)Zero speed holding torque time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model setting
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)(((
 .0 to 6000.0s
  If the value is set to 6000.0s, the value remains unchanged without time limitation
  )))
--
--
  Set the torque holding time when the inverter is running at zero speed. The timing starts when the operating frequency is 0Hz, and the inverter stops output after the time reaches the set zero-speed holding torque time. Among them, the effective timing value is 0 to 5999.9s, and the parameters are set in the effective timing value of the VFD at the set time. After the time is full, the VFD terminates and maintains the zero-speed torque.
  If the parameter setting is equal to 6000.0s, the VFD is not timed and defaults to long-term validity, and the zero-speed torque holding is terminated only after the stop command is given or the non-zero operating frequency is given.
@@ -612,18 +612,18 @@
  Setting an appropriate zero-speed holding torque time can effectively achieve energy saving and protect the motor.
--|(% rowspan="2" %)F1.25|Start pre-excitation time|Factory default|0.20
--|Setting range|(% colspan="2" %)0.00 to 60.00s
++|(% rowspan="2" style="text-align:center" %)F1.25|(% style="text-align:center" %)Start pre-excitation time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.20
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 60.00s
  This parameter is only valid if F0.00=0, in the open loop vector start, appropriate pre-excitation can make the start smoother.
--|(% rowspan="2" %)F1.26|Shutdown frequency|Factory default|0.00Hz
--|Setting range|(% colspan="2" %)0.00-60.00Hz
++|(% rowspan="2" style="text-align:center" %)F1.26|(% style="text-align:center" %)Shutdown frequency|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.00Hz
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 60.00Hz
  This function is defined as the frequency of the minimum output of the inverter, less than this frequency, the output of the inverter stops.
--|(% rowspan="2" %)F1.27|Power failure restart action selection|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F1.27|(% style="text-align:center" %)Power failure restart action selection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Invalid
 : Valid
@@ -633,14 +633,13 @@
 : Valid If the inverter is in operation before the power is cut off, the inverter will automatically start after the power is restored and after the set waiting time (set by [F1.28]). During the waiting time of power failure and restart, the inverter does not accept the running command, but if the stop command is entered during this period, the inverter will release the restart state.
--|(% rowspan="2" %)F1.28|Power failure restart waiting time|Factory default|0.50s
--|Setting range|(% colspan="2" %)0.00 to 120.00s
++|(% rowspan="2" style="text-align:center" %)F1.28|(% style="text-align:center" %)Power failure restart waiting time|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)0.50s
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.00 to 120.00s
  When [F1.27] setting is effective, After the inverter power supply, it will wait for the time set in [F1.28] to start running.
--
--|(% rowspan="2" %)F1.29|Select the terminal running protection|Factory default|11
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F1.29|(% style="text-align:center" %)Select the terminal running protection|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)11
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
  LED units digital: Select the terminal run instruction when powering on.
 : The terminal running instruction is invalid during power-on.
@@ -656,7 +656,6 @@
  When terminal operation is selected, the initial wiring state of peripheral devices may affect the safety of the device. This parameter provides protective measures for terminal operation.
--
  LED units place: Select the terminal run command when powering on
  Select the mode of executing the operation instruction when the inverter is powered on with the terminal running signal in effect.
@@ -673,11 +673,10 @@
 : When the terminal instruction is effective, the terminal control can be started directly.
++== **F2 group motor parameters** ==
--**F2 group motor parameters**
--
--|(% rowspan="2" %)F2.00|Motor type|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F2.00|(% style="text-align:center" %)Motor type|(% style="text-align:center" %)Factory default|0
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : Asynchronous motor (AM)
 : Permanent magnet synchronous motor (PM)
@@ -687,41 +687,41 @@
 Single-phase asynchronous motor refers to a single-phase motor without phase shift capacitance, U terminal is connected to the main winding, V terminal is connected to the common end, and W terminal is connected to the auxiliary winding.
--| |(% rowspan="2" %)F2.01|(% colspan="2" %)Rated power of motor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
--| |(% colspan="2" %)Setting range|(% colspan="4" %)0.1kW to 400.0kW|
--| |(% rowspan="2" %)F2.02|(% colspan="2" %)Rated voltage of motor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
--| |(% colspan="2" %)Setting range|(% colspan="4" %)1V to 440V|
--| |(% rowspan="2" %)F2.03|(% colspan="2" %)Rated current of motor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
--| |(% colspan="2" %)Setting range|(% colspan="4" %)0.1A to 2000.0A|
--| |(% rowspan="2" %)F2.04|(% colspan="2" %)Rated power of motor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
--| |(% colspan="2" %)Setting range|(% colspan="4" %)0.00Hz-Maximum frequency F0.10|
--| |(% rowspan="2" %)F2.05|(% colspan="2" %)Rated motor speed|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination|
--| |(% colspan="2" %)Setting range|(% colspan="4" %)1rpm to 65000rpm|
--|(% colspan="8" %)**Note:**|
--|(% colspan="8" %)(((
++(% style="width:875px" %)
++|(% colspan="2" rowspan="2" style="text-align:center" %)F2.01|(% colspan="2" style="text-align:center" %)Rated power of motor|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
++|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)0.1kW to 400.0kW
++|(% colspan="2" rowspan="2" style="text-align:center" %)F2.02|(% colspan="2" style="text-align:center" %)Rated voltage of motor|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
++|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)1V to 440V
++|(% colspan="2" rowspan="2" style="text-align:center" %)F2.03|(% colspan="2" style="text-align:center" %)Rated current of motor|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
++|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)0.1A to 2000.0A
++|(% colspan="2" rowspan="2" style="text-align:center" %)F2.04|(% colspan="2" style="text-align:center" %)Rated power of motor|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
++|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)0.00Hz to Maximum frequency F0.10
++|(% colspan="2" rowspan="2" style="text-align:center" %)F2.05|(% colspan="2" style="text-align:center" %)Rated motor speed|(% colspan="2" style="text-align:center" %)Factory default|(% colspan="2" style="text-align:center" %)Model determination
++|(% colspan="2" style="text-align:center" %)Setting range|(% colspan="4" style="text-align:center" %)1rpm to 65000rpm
++|(% colspan="8" %)**✎Note:**(((
 . Please set according to the nameplate parameters of the motor.
 . The excellent control performance of vector control requires accurate motor parameters, and accurate parameter identification comes from the correct setting of the rated parameters of the motor.
 . In order to ensure the control performance, please configure the motor according to the inverter standard adaptation motor, if the motor power and the standard adaptation motor gap is too large, the control performance of the inverter will be significantly reduced.
--)))|
--|(% colspan="3" rowspan="2" %)F2.06|(% colspan="2" %)Motor stator resistance|(% colspan="2" %)Factory default|Model determination|
--|(% colspan="2" %)Setting range|(% colspan="3" %)0.001Ω to 65.000Ω|
--|(% colspan="3" rowspan="2" %)F2.07|(% colspan="2" %)Motor rotor resistance|(% colspan="2" %)Factory default|Model determination|
--|(% colspan="2" %)Setting range|(% colspan="3" %)0.001Ω to 65.000Ω|
--|(% colspan="3" rowspan="2" %)F2.08|(% colspan="2" %)Motor fixed rotor inductance|(% colspan="2" %)Factory default|Model determination|
--|(% colspan="2" %)Setting range|(% colspan="4" %)0.1 to 6500.0mH
--|(% colspan="3" rowspan="2" %)F2.09|(% colspan="2" %)Mutual inductance of motor fixed rotor|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination
--|(% colspan="2" %)Setting range|(% colspan="4" %)0.1 to 6500.0mH
--|(% colspan="3" rowspan="2" %)F2.10|(% colspan="2" %)Motor no-load current|(% colspan="2" %)Factory default|(% colspan="2" %)Model determination
--|(% colspan="2" %)Setting range|(% colspan="4" %)0.1 to 650.0A
++)))
++|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.06|(% colspan="2" style="text-align:center; width:493px" %)Motor stator resistance|(% colspan="2" style="text-align:center" %)Factory default|Model determination
++|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.001Ω to 65.000Ω
++|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.07|(% colspan="2" style="text-align:center; width:493px" %)Motor rotor resistance|(% colspan="2" style="text-align:center" %)Factory default|Model determination
++|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.001Ω to 65.000Ω
++|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.08|(% colspan="2" style="text-align:center; width:493px" %)Motor fixed rotor inductance|(% colspan="2" style="text-align:center" %)Factory default|Model determination
++|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.1 to 6500.0mH
++|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.09|(% colspan="2" style="text-align:center; width:493px" %)Mutual inductance of motor fixed rotor|(% colspan="2" style="text-align:center" %)Factory default|Model determination
++|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.1 to 6500.0mH
++|(% colspan="3" rowspan="2" style="text-align:center; width:84px" %)F2.10|(% colspan="2" style="text-align:center; width:493px" %)Motor no-load current|(% colspan="2" style="text-align:center" %)Factory default|Model determination
++|(% colspan="2" style="text-align:center; width:493px" %)Setting range|(% colspan="3" style="text-align:center" %)0.1 to 650.0A
  After the automatic tuning of the asynchronous motor is completed normally, the set values of the asynchronous motor parameters (F2.06 to F2.10) are automatically updated.
  After changing the motor rated power F2.01 each time, the VFD F2.06 to F2.10 parameter values will automatically restore the default standard motor parameters, if running in vector mode, please re-tune.
--|(% rowspan="2" %)F2.11|Tuning selection|Factory default|0
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center; width:135px" %)F2.11|(% style="text-align:center; width:266px" %)Tuning selection|(% style="text-align:center; width:202px" %)Factory default|(% style="text-align:center" %)0
++|(% style="text-align:center; width:266px" %)Setting range|(% colspan="2" style="width:231px" %)(((
 : No operation is performed
 : Static tuning 1
@@ -731,8 +731,6 @@
 : Static tuning 2 (AM calculated Lm)
  )))
--
--
  Tip: Before tuning, you must set the correct motor type and rating parameters (F2.00 to F2.05).
 : No operation is performed, that is, tuning is disabled.
@@ -751,15 +751,13 @@
  Note: Tuning can only be effective in keyboard control mode, acceleration and deceleration time is recommended to use the factory default.
--|(% rowspan="2" %)F2.12|G/P Machine type|Factory default|Model determination
--|Setting range|(% colspan="2" %)(((
++|(% rowspan="2" style="text-align:center" %)F2.12|(% style="text-align:center" %)G/P Machine type|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" %)(((
 : G type machine;
 : P-type machine
  )))
--
--
  This parameter can only be used to view factory models.
 : Constant torque load for specified rated parameters.
@@ -766,73 +766,63 @@
 : Suitable for the specified rated parameters of the variable torque load (fan, pump load).
--|(% rowspan="2" %)F2.13|Single phase asynchronous motor turns ratio|Factory default|100%
--|Setting range|(% colspan="2" %)10 to 200%
++|(% rowspan="2" style="text-align:center" %)F2.13|(% style="text-align:center" %)Single phase asynchronous motor turns ratio|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)100%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)10 to 200%
--
--
  U terminal main winding, V terminal auxiliary winding, W common end, this parameter is used to set the ratio of the number of turns between the main winding and the auxiliary winding of the single-phase motor.
--|(% rowspan="2" %)F2.14|Current calibration coefficient of single-phase motor|Factory default|120%
--|Setting range|(% colspan="2" %)50 to 200%
++|(% rowspan="2" style="text-align:center" %)F2.14|(% style="text-align:center" %)Current calibration coefficient of single-phase motor|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)120%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)50 to 200%
  The single-phase motor has main and auxiliary windings, and the three-phase output current is unbalanced, so the output current displayed by the inverter needs to be multiplied by the coefficient of the resultant current.
++|(% rowspan="2" style="text-align:center" %)F2.15|(% style="text-align:center; width:310px" %)Number of motor poles|(% style="text-align:center; width:167px" %)Factory default|(% style="text-align:center" %)4
++|(% style="text-align:center; width:310px" %)Setting range|(% colspan="2" style="text-align:center; width:215px" %)2 to 48
--|(% rowspan="2" %)F2.15|Number of motor poles|Factory default|4
--|Setting range|(% colspan="2" %)2 to 48
--
--
--
  Change F2.04 or F2.05, the program will automatically calculate the number of motor poles, in general, do not need to set this parameter.
--|(% rowspan="2" %)F2.22|Stator resistance of synchro|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.001 to 65.000(0.001Ohm)
--|(% rowspan="2" %)F2.23|Synchro d-axis inductance|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.01mH-655.35mH
--|(% rowspan="2" %)F2.24|Synchro Q-axis inductance|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.01mH to 655.35mH
--|(% rowspan="2" %)F2.25|Synchro back electromotive force|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.1V to 1000.0V
++|(% rowspan="2" style="text-align:center" %)F2.22|(% style="text-align:center" %)Stator resistance of synchro|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.001 to 65.000(0.001Ohm)
++|(% rowspan="2" style="text-align:center" %)F2.23|(% style="text-align:center" %)Synchro d-axis inductance|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01mH to 655.35mH
++|(% rowspan="2" style="text-align:center" %)F2.24|(% style="text-align:center" %)Synchro Q-axis inductance|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01mH to 655.35mH
++|(% rowspan="2" style="text-align:center" %)F2.25|(% style="text-align:center" %)Synchro back electromotive force|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1V to 1000.0V
  After the automatic tuning of the synchronous motor is completed, the set values of the synchronous motor parameters (F2.22 to F2.25) are automatically updated.
  After changing the rated motor power F2.01 each time, the F2.22 to F2.25 parameter values of the inverter will automatically restore the default standard motor parameters, please re-tune.
--|(% rowspan="2" %)F2.28|High frequency injection voltage|Factory default|20.0%
--|Setting range|(% colspan="2" %)0.1% to 100.0%
++|(% rowspan="2" style="text-align:center" %)F2.28|(% style="text-align:center" %)High frequency injection voltage|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)20.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1% to 100.0%
--
--
  The current injected when the synchronous motor learns the inductance of DQ axis by high frequency injection.
--|(% rowspan="2" %)F2.29|Back potential identification current|Factory default|50.0%
--|Setting range|(% colspan="2" %)0.1% to 100.0%
++|(% rowspan="2" style="text-align:center" %)F2.29|(% style="text-align:center" %)Back potential identification current|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)50.0%
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1% to 100.0%
--
--
  The output current of the inverter is the size when the synchronous motor dynamically adjusts to learn the back potential.
++|(% rowspan="2" style="text-align:center" %)F2.31|(% style="text-align:center" %)Asynchronous no-load current per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1%
++|(% rowspan="2" style="text-align:center" %)F2.32|(% style="text-align:center" %)Per unit asynchronous stator resistance|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
++|(% rowspan="2" style="text-align:center" %)F2.33|(% style="text-align:center" %)Asynchronous rotor resistance per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
++|(% rowspan="2" style="text-align:center" %)F2.34|(% style="text-align:center" %)Asynchronous mutual inductance per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1%
++|(% rowspan="2" style="text-align:center" %)F2.35|(% style="text-align:center" %)Asynchronous leakage sensing per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
++|(% rowspan="2" style="text-align:center" %)F2.36|(% style="text-align:center" %)Per unit value of asynchronous leakage sensing coefficient|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
++|(% rowspan="2" style="text-align:center" %)F2.37|(% style="text-align:center" %)Synchronous stator resistance per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
++|(% rowspan="2" style="text-align:center" %)F2.38|(% style="text-align:center" %)Per unit value of synchronous D-axis inductance|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
++|(% rowspan="2" style="text-align:center" %)F2.39|(% style="text-align:center" %)Synchronous Q-axis inductance per unit value|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.01%
++|(% rowspan="2" style="text-align:center" %)F2.40|(% style="text-align:center" %)Back electromotive force of synchronous motor|(% style="text-align:center" %)Factory default|(% style="text-align:center" %)Model determination
++|(% style="text-align:center" %)Setting range|(% colspan="2" style="text-align:center" %)0.1V
--|(% rowspan="2" %)F2.31|Asynchronous no-load current per unit value|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.1%
--|(% rowspan="2" %)F2.32|Per unit asynchronous stator resistance|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.01%
--|(% rowspan="2" %)F2.33|Asynchronous rotor resistance per unit value|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.01%
--|(% rowspan="2" %)F2.34|Asynchronous mutual inductance per unit value|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.1%
--|(% rowspan="2" %)F2.35|Asynchronous leakage sensing per unit value|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.01%
--|(% rowspan="2" %)F2.36|Per unit value of asynchronous leakage sensing coefficient|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.01%
--|(% rowspan="2" %)F2.37|Synchronous stator resistance per unit value|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.01%
--|(% rowspan="2" %)F2.38|Per unit value of synchronous D-axis inductance|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.01%
--|(% rowspan="2" %)F2.39|Synchronous Q-axis inductance per unit value|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.01%
--|(% rowspan="2" %)F2.40|Back electromotive force of synchronous motor|Factory default|Model determination
--|Setting range|(% colspan="2" %)0.1V
--
--The per unit value of the motor parameters is used for the actual program calculation. After learning or parameter recovery, the actual change is F2.31-F2.40. F2.06-F2.10 and F2.22-F2.25 are calculated from the per unit value, so only F2.31-F2.40 values can be modified, F2.06-F2.10 and F2.22-F2.25 are only used to display and cannot be changed.
++The per unit value of the motor parameters is used for the actual program calculation. After learning or parameter recovery, the actual change is F2.31 to F2.40. F2.06 to F2.10 and F2.22 to F2.25 are calculated from the per unit value, so only F2.31 to F2.40 values can be modified, F2.06 to F2.10 and F2.22 to F2.25 are only used to display and cannot be changed.

1763024398600-482.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Iris

Size

...	...	@@ -1,0 +1,1 @@
	1	+99.1 KB

Content

Changes for page 09 Function code

Summary

Details

Navigation

Table of Contents