Changes for page 4 VC Series Manual V1.2
Last modified by Iris on 2025/11/06 15:24
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,6 +1,6 @@ 1 -**Preface** 1 += **Preface** = 2 2 3 -**Material Verview:**3 +**Material Overview:** 4 4 5 5 Thank you for choosing VC Series Multifunctional Vector VFD. 6 6 ... ... @@ -50,7 +50,8 @@ 50 50 51 51 [[image:1762401041264-807.png]] Note: If the correct prompt is violated, it may result in an error or unsafe use of the device. 52 52 53 -|[[image:1762401041264-264.jpeg]]**WARNING** 53 +(% style="margin-left:auto; margin-right:auto" %) 54 +|(% style="text-align:center" %)[[image:1762401041264-264.jpeg]]**WARNING** 54 54 |((( 55 55 ◎ If VFD is damaged, flooded or parts are missing, it cannot be installed or operated. Otherwise, equipment damage or personal injury may occur. 56 56 ... ... @@ -71,15 +71,13 @@ 71 71 ◎ The wiring cable of the main loop terminal should use a wire nose with an insulating sleeve. 72 72 ))) 73 73 74 - 75 - 76 -|[[image:1762401041265-288.jpeg]]**DANGER** 75 +|(% style="text-align:center" %)[[image:1762401041264-264.jpeg]]**DANGER** 77 77 |((( 78 78 ◎ Wiring must be completed by qualified professional electrical engineers, otherwise it is possible to shock or cause damage to the inverter. 79 79 80 80 ◎ Ensure that the power supply is off before connecting the cable. Otherwise, electric shock or fire may occur. 81 81 82 - [[image:1762401041266-116.jpeg]]◎81 +◎ Ground terminal must be grounded reliably. Otherwise, there is a risk of electrified VFD housing. 83 83 84 84 ◎ Do not touch the main loop terminal. Do not connect the main loop terminal of the VFD to the housing. Otherwise, electric shock may occur. 85 85 ... ... @@ -92,30 +92,30 @@ 92 92 ◎ The "Run/Stop" button may fail due to a function setting. A separate emergency power off switch can be installed in the inverter control system, otherwise it may result in personal injury. 93 93 ))) 94 94 95 - 96 - 97 - 98 -|[[image:1762401041266-240.jpeg]]**WARNING** 94 +|(% style="text-align:center" %)((( 95 +[[image:1762401041264-264.jpeg]]**WARNING** 96 +))) 99 99 |◎ PCB has a CMOS integrated circuit. Do not touch it with your hands. Otherwise, static electricity may damage the PCB. 100 100 101 - 102 - 103 - 104 -|**Unpacking and Inspecting** 105 -|((( 106 -[[image:1762401041267-625.jpeg]]WARNING 107 - 99 +|**Unpacking and Inspecting **| 100 +|(% style="text-align:center" %)((( 101 + [[image:1762401041264-264.jpeg]]**WARNING** 102 +)))| 103 +|(% style="vertical-align:middle" %)((( 108 108 When unpacking the product and product accessories are found to have damage, rust, signs of use and other problems, do not install! 109 109 106 +((( 110 110 When the product is found inside water, parts missing or parts damaged, do not install! 111 111 112 112 Please check the packing list carefully. If the packing list does not match the product name, do not install! 113 113 ))) 111 +))) 112 +|(% style="text-align:center; vertical-align:middle" %)((( 113 + [[image:1762401041264-264.jpeg]]**NOTE** 114 +))) 114 114 |((( 115 - [[image:1762401041268-241.jpeg]]NOTE116 + Before unpacking, please check whether the outer package of the equipment is intact, whether it is damaged, soaked, damp, deformed, etc. 116 116 117 -Before unpacking, please check whether the outer package of the equipment is intact, whether it is damaged, soaked, damp, deformed, etc. 118 - 119 119 Please open the package in order of hierarchy, do not hit hard! 120 120 121 121 When unpacking, please check the surface of the equipment and accessories for damage, rust, bruise and other conditions. ... ... @@ -123,9 +123,10 @@ 123 123 After unpacking, please check the packing list carefully to check whether the quantity and information of equipment and accessories are complete. 124 124 ))) 125 125 |**Storage and Transportation** 125 +|(% style="text-align:center" %)((( 126 +[[image:1762401041264-264.jpeg]]**WARNING** 127 +))) 126 126 |((( 127 -[[image:1762401041268-965.jpeg]]WARNING 128 - 129 129 Be sure to use professional lifting equipment and handle large or heavy products by qualified professionals. Otherwise, there is a risk of injury or product damage! 130 130 131 131 Before vertical lifting the product, please confirm that the front cover, terminal block and other product components have been fixed with screws, otherwise the parts fall off may cause injury or product damage danger! ... ... @@ -136,9 +136,10 @@ 136 136 137 137 The product is suspended for a long time, otherwise there is a risk of injury or product damage! 138 138 ))) 139 +|(% style="text-align:center" %)((( 140 + [[image:1762401041264-264.jpeg]]**NOTE** 141 +))) 139 139 |((( 140 -[[image:1762401041269-140.jpeg]]NOTE 141 - 142 142 When handling the product, please be sure to carry it gently and pay attention to the object under your feet at any time to prevent tripping or falling, otherwise there is the risk of injury or product damage! 143 143 144 144 When handling the product by hand, be sure to grasp the product shell to avoid the product parts falling, otherwise there is the risk of injury! ... ... @@ -154,16 +154,18 @@ 154 154 It is strictly prohibited to transport this product together with equipment or articles that may affect or damage this product. 155 155 ))) 156 156 |**Installation** 158 +|(% style="text-align:center" %)((( 159 +[[image:1762401041264-264.jpeg]]**DANGER** 160 +))) 157 157 |((( 158 -[[image:1762401041269-351.jpeg]]DANGER 159 - 160 160 Only professionals who have been trained in electrical equipment and have electrical knowledge can operate. Non-professional personnel are strictly prohibited! 161 161 ))) 164 +|(% style="text-align:center" %)((( 165 +[[image:1762401041264-264.jpeg]]**WARNING** 166 +))) 162 162 |((( 163 - [[image:1762401041270-899.jpeg]]WARNING168 + Please read the product manual and safety precautions carefully before installation! 164 164 165 -Please read the product manual and safety precautions carefully before installation! 166 - 167 167 Do not install this product in places with strong electric field or electromagnetic wave interference! 168 168 169 169 Before installation, ensure that the mechanical strength of the installation position is sufficient to support the weight of the equipment, otherwise it will cause mechanical hazards. ... ... @@ -182,19 +182,19 @@ 182 182 183 183 Please install the product on metal and other flame-retardant objects, do not make flammable substances contact the product or attach flammable substances to the product, otherwise there will be a risk of fire. 184 184 ))) 188 +|(% style="text-align:center" %)[[image:1762401041264-264.jpeg]]**NOTE** 185 185 |((( 186 - [[image:1762401041270-619.jpeg]]NOTE190 + During installation, cover the top of the product with cloth or paper to prevent foreign bodies such as metal shavings, oil, and water from entering the inside of the product during drilling and causing product failure. After the operation, please remove the cover to avoid blocking the ventilation hole and affecting heat dissipation, resulting in abnormal heating of the product. 187 187 188 -During installation, cover the top of the product with cloth or paper to prevent foreign bodies such as metal shavings, oil, and water from entering the inside of the product during drilling and causing product failure. After the operation, please remove the cover to avoid blocking the ventilation hole and affecting heat dissipation, resulting in abnormal heating of the product. 189 - 190 190 Resonance may occur when a machine operating at a constant speed is operated with variable speeds. At this time, install anti-vibration under the motor frame. 191 191 192 192 Rubber or use vibration suppression function, can effectively reduce the resonance. 193 193 ))) 194 194 |**Wiring** 197 +|(% style="text-align:center" %)((( 198 +[[image:1762401041264-264.jpeg]]**DANGER** 199 +))) 195 195 |((( 196 -[[image:1762401041270-150.jpeg]]DANGER 197 - 198 198 Non-professional personnel are strictly prohibited from equipment installation, wiring, maintenance, inspection or parts replacement! 199 199 200 200 Before wiring, please cut off the power to all devices. After the power supply is turned off, the internal capacitor has residual voltage. Wait at least the time specified in the warning label before connecting cables. Measure the DC voltage of the main circuit and confirm that it is under the safe voltage, otherwise there is the risk of electric shock. ... ... @@ -203,9 +203,10 @@ 203 203 204 204 Ensure that devices and products are properly grounded; otherwise, electric shocks may occur. 205 205 ))) 209 +|(% style="text-align:center" %)((( 210 +[[image:1762401041264-264.jpeg]]**WARNING** 211 +))) 206 206 |((( 207 -[[image:1762401041271-454.jpeg]]WARNING 208 - 209 209 Do not connect the input power to the output of the device or product, otherwise it will cause damage to the device and even cause a fire. 210 210 211 211 When the drive device is connected to the motor, be sure to ensure that the phase sequence of the product and the motor terminal is accurate and consistent to avoid the reverse rotation of the motor. ... ... @@ -216,17 +216,19 @@ 216 216 217 217 After the cable connection is complete, ensure that all cables are correctly connected, and there are no dropped screws, gaskets, or bare cables in the product Risk of electric shock or damage to the product. 218 218 ))) 223 +|(% style="text-align:center" %)((( 224 +[[image:1762401041264-264.jpeg]]**NOTE** 225 +))) 219 219 |((( 220 -[[image:1762401041271-177.jpeg]]NOTE 221 - 222 222 Please follow the steps specified in ESD preventive measures and wear an ESD bracelet for wiring and other operations to avoid damaging the circuit inside the device or product. 223 223 224 224 When wiring the control loop, please use double-stranded shield wire to connect the shield layer to the grounding terminal of the product for grounding, otherwise it will cause abnormal operation of the product. 225 225 ))) 226 226 |**Power-on** 232 +|(% style="text-align:center" %)((( 233 +[[image:1762401041264-264.jpeg]]**DANGER** 234 +))) 227 227 |((( 228 -[[image:1762401041272-340.jpeg]]DANGER 229 - 230 230 Before powering on, please confirm that the product is installed well, the wiring is firm, and the motor device is allowed to restart. 231 231 232 232 Before powering on, please confirm that the power supply meets the product requirements to avoid product damage or fire! ... ... @@ -233,9 +233,10 @@ 233 233 234 234 It is strictly prohibited to open the door of the product cabinet or the product protection cover plate, touch any terminal of the product, disassemble any device or component of the product in the energized state, otherwise there is a risk of electric shock! 235 235 ))) 242 +|(% style="text-align:center" %)((( 243 +[[image:1762401041264-264.jpeg]]**WARNING** 244 +))) 236 236 |((( 237 -[[image:1762401041272-256.jpeg]]WARNING 238 - 239 239 After the wiring operation and parameter setting is completed, please conduct a trial run of the machine to confirm that the machine can operate safely, otherwise it may lead to injuries or equipment damage. 240 240 241 241 Before power on, please ensure that the rated voltage of the product is consistent with the power supply voltage. If the power supply voltage is used incorrectly, there is a risk of fire. ... ... @@ -242,25 +242,28 @@ 242 242 243 243 Before powering on the machine, ensure that no one is around the machine, motor, or machine, as this may result in injury or death. 244 244 ))) 245 -|**Runtime** 252 +|**Runtime**| 253 +|(% style="text-align:center" %)((( 254 +[[image:1762401041264-264.jpeg]]**DANGER** 255 +)))| 246 246 |((( 247 -[[image:1762401041272-732.jpeg]]DANGER 248 - 249 249 Non-professional personnel are strictly prohibited from running the product, otherwise it will lead to injury or death! 250 250 251 251 It is strictly forbidden to touch any terminal of the equipment, disassemble any device or component of the equipment and product in the running state, otherwise there is a risk of electric shock! 252 252 ))) 261 +|(% style="text-align:center" %)((( 262 +[[image:1762401041264-264.jpeg]]**WARNING** 263 +))) 253 253 |((( 254 -[[image:1762401041273-313.jpeg]]WARNING 255 - 256 256 Do not touch the device housing, fan or resistor to test the temperature, otherwise it may cause burns! 257 257 258 258 During operation, avoid other items or metal objects falling into the equipment, otherwise it may cause fire or product damage! 259 259 ))) 260 260 |**Maintenance Time** 270 +|(% style="text-align:center" %)((( 271 +[[image:1762401041264-264.jpeg]]**DANGER** 272 +))) 261 261 |((( 262 -[[image:1762401041273-926.jpeg]]DANGER 263 - 264 264 Non-professional personnel are strictly prohibited from equipment installation, wiring, maintenance, inspection or parts replacement! 265 265 266 266 It is strictly prohibited to carry out equipment maintenance in the energized state, otherwise there is the risk of electric shock! ... ... @@ -269,15 +269,17 @@ 269 269 270 270 When using a PM motor, even if the power supply of the product is turned off, an induced voltage is generated on the motor terminals during the motor rotation. Do not touch the terminal of the motor, otherwise there may be a risk of electric shock. 271 271 ))) 282 +|(% style="text-align:center" %)((( 283 +[[image:1762401041264-264.jpeg]]**WARNING** 284 +))) 272 272 |((( 273 -[[image:1762401041273-513.jpeg]]WARNING 274 - 275 -Please check and maintain the equipment and products daily and regularly according to the equipment maintenance and maintenance requirements, and make maintenance records. 286 + Please check and maintain the equipment and products daily and regularly according to the equipment maintenance and maintenance requirements, and make maintenance records. 276 276 ))) 277 277 |**Maintain** 289 +|(% style="text-align:center" %)((( 290 +[[image:1762401041264-264.jpeg]]**DANGER** 291 +))) 278 278 |((( 279 -[[image:1762401041274-280.jpeg]]DANGER 280 - 281 281 Non-professional personnel are strictly prohibited from equipment installation, wiring, maintenance, inspection or parts replacement! 282 282 283 283 It is strictly prohibited to carry out equipment maintenance in the energized state, otherwise there is the risk of electric shock! ... ... @@ -284,11 +284,12 @@ 284 284 285 285 After powering off all devices, wait at least the time specified in the warning label before checking or maintaining the devices. 286 286 ))) 299 +|(% style="text-align:center" %)((( 300 +[[image:1762401041264-264.jpeg]]**WARNING** 301 +))) 287 287 |((( 288 - [[image:1762401041274-562.jpeg]]WARNING303 + Please repair the equipment according to the product warranty agreement. 289 289 290 -Please repair the equipment according to the product warranty agreement. 291 - 292 292 When the fuse is blown, the circuit breaker is tripped or the leakage circuit breaker (ELCB) is tripped, please wait at least the time specified on the warning label on the product before switching on the power or operating the machine, otherwise it may cause casualties and equipment damage. 293 293 294 294 When the equipment fails or is damaged, it is necessary for professionals to troubleshoot and repair the equipment and products according to the maintenance guidance, and make maintenance records. ... ... @@ -300,9 +300,10 @@ 300 300 After replacing the device, check cable connections and set parameters again. 301 301 ))) 302 302 |**Scrap** 316 +|(% style="text-align:center" %)((( 317 +[[image:1762401041264-264.jpeg]]**WARNING** 318 +))) 303 303 |((( 304 -[[image:1762401041274-704.jpeg]]WARINING 305 - 306 306 Please scrap equipment and products in accordance with relevant national regulations and standards to avoid property losses or casualties! 307 307 308 308 Waste equipment and products should be recycled in accordance with industrial waste treatment standards to avoid environmental pollution.