Changes for page 4 VC Series Manual V1.2

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,6 +1,6 @@
1		-= **Preface** =
	1	+**Preface**
2	2
3		-**Material Overview:**
	3	+**Material Verview:**
4	4
5	5	Thank you for choosing VC Series Multifunctional Vector VFD.
6	6
...	...	@@ -50,8 +50,7 @@
50	50
51	51	[[image:1762401041264-807.png]] Note: If the correct prompt is violated, it may result in an error or unsafe use of the device.
52	52
53		-(% style="margin-left:auto; margin-right:auto" %)
54		-|(% style="text-align:center" %)[[image:1762401041264-264.jpeg]]**WARNING**
	53	+|[[image:1762401041264-264.jpeg]]**WARNING**
55	55	|(((
56	56	◎ If VFD is damaged, flooded or parts are missing, it cannot be installed or operated. Otherwise, equipment damage or personal injury may occur.
57	57
...	...	@@ -72,13 +72,15 @@
72	72	◎ The wiring cable of the main loop terminal should use a wire nose with an insulating sleeve.
73	73	)))
74	74
75		-|(% style="text-align:center" %)[[image:1762401041265-288.jpeg]]**DANGER**
	74	+
	75	+
	76	+|[[image:1762401041265-288.jpeg]]**DANGER**
76	76	|(((
77	77	◎ Wiring must be completed by qualified professional electrical engineers, otherwise it is possible to shock or cause damage to the inverter.
78	78
79	79	◎ Ensure that the power supply is off before connecting the cable. Otherwise, electric shock or fire may occur.
80	80
81		-◎ Ground terminal must be grounded reliably. Otherwise, there is a risk of electrified VFD housing.
	82	+[[image:1762401041266-116.jpeg]]◎   Ground terminal must be grounded reliably. Otherwise, there is a risk of electrified VFD housing.
82	82
83	83	◎ Do not touch the main loop terminal. Do not connect the main loop terminal of the VFD to the housing. Otherwise, electric shock may occur.
84	84
...	...	@@ -91,28 +91,30 @@
91	91	◎ The "Run/Stop" button may fail due to a function setting. A separate emergency power off switch can be installed in the inverter control system, otherwise it may result in personal injury.
92	92	)))
93	93
94		-|(% style="text-align:center" %)[[image:1762401041266-240.jpeg]]**WARNING**
	95	+
	96	+
	97	+
	98	+|[[image:1762401041266-240.jpeg]]**WARNING**
95	95	|◎ PCB has a CMOS integrated circuit. Do not touch it with your hands. Otherwise, static electricity may damage the PCB.
96	96
97		-|**Unpacking and Inspecting **|
98		-|(% style="text-align:center" %)(((
99		- [[image:1762401041267-625.jpeg]]WARNING
100		-)))|
101		-|(% style="vertical-align:middle" %)(((
	101	+
	102	+
	103	+
	104	+|**Unpacking and Inspecting**
	105	+|(((
	106	+[[image:1762401041267-625.jpeg]]WARNING
	107	+
102	102	When unpacking the product and product accessories are found to have damage, rust, signs of use and other problems, do not install!
103	103
104		-(((
105	105	When the product is found inside water, parts missing or parts damaged, do not install!
106	106
107	107	Please check the packing list carefully. If the packing list does not match the product name, do not install!
108	108	)))
109		-)))
110		-|(% style="text-align:center; vertical-align:middle" %)(((
111		- [[image:1762401041268-241.jpeg]]NOTE
112		-)))
113	113	|(((
114		- Before unpacking, please check whether the outer package of the equipment is intact, whether it is damaged, soaked, damp, deformed, etc.
	115	+[[image:1762401041268-241.jpeg]]NOTE
115	115
	117	+Before unpacking, please check whether the outer package of the equipment is intact, whether it is damaged, soaked, damp, deformed, etc.
	118	+
116	116	Please open the package in order of hierarchy, do not hit hard!
117	117
118	118	When unpacking, please check the surface of the equipment and accessories for damage, rust, bruise and other conditions.
...	...	@@ -120,8 +120,9 @@
120	120	After unpacking, please check the packing list carefully to check whether the quantity and information of equipment and accessories are complete.
121	121	)))
122	122	|**Storage and Transportation**
123		-|(% style="text-align:center" %)[[image:1762401041267-625.jpeg||height="42" width="47"]]WARNING
124	124	|(((
	127	+[[image:1762401041268-965.jpeg]]WARNING
	128	+
125	125	Be sure to use professional lifting equipment and handle large or heavy products by qualified professionals. Otherwise, there is a risk of injury or product damage!
126	126
127	127	Before vertical lifting the product, please confirm that the front cover, terminal block and other product components have been fixed with screws, otherwise the parts fall off may cause injury or product damage danger!
...	...	@@ -132,10 +132,9 @@
132	132
133	133	The product is suspended for a long time, otherwise there is a risk of injury or product damage!
134	134	)))
135		-|(% style="text-align:center" %)(((
136		- [[image:1762401041269-140.jpeg||height="43" width="48"]]NOTE
137		-)))
138	138	|(((
	140	+[[image:1762401041269-140.jpeg]]NOTE
	141	+
139	139	When handling the product, please be sure to carry it gently and pay attention to the object under your feet at any time to prevent tripping or falling, otherwise there is the risk of injury or product damage!
140	140
141	141	When handling the product by hand, be sure to grasp the product shell to avoid the product parts falling, otherwise there is the risk of injury!
...	...	@@ -151,18 +151,16 @@
151	151	It is strictly prohibited to transport this product together with equipment or articles that may affect or damage this product.
152	152	)))
153	153	|**Installation**
154		-|(% style="text-align:center" %)(((
155		- [[image:1762401041269-351.jpeg||height="40" width="45"]]DANGER
156		-)))
157	157	|(((
	158	+[[image:1762401041269-351.jpeg]]DANGER
	159	+
158	158	Only professionals who have been trained in electrical equipment and have electrical knowledge can operate. Non-professional personnel are strictly prohibited!
159	159	)))
160		-|(% style="text-align:center" %)(((
161		- [[image:1762401041270-899.jpeg||height="41" width="46"]]WARNING
162		-)))
163	163	|(((
164		- Please read the product manual and safety precautions carefully before installation!
	163	+[[image:1762401041270-899.jpeg]]WARNING
165	165
	165	+Please read the product manual and safety precautions carefully before installation!
	166	+
166	166	Do not install this product in places with strong electric field or electromagnetic wave interference!
167	167
168	168	Before installation, ensure that the mechanical strength of the installation position is sufficient to support the weight of the equipment, otherwise it will cause mechanical hazards.
...	...	@@ -181,19 +181,19 @@
181	181
182	182	Please install the product on metal and other flame-retardant objects, do not make flammable substances contact the product or attach flammable substances to the product, otherwise there will be a risk of fire.
183	183	)))
184		-|(% style="text-align:center" %)[[image:1762401041270-619.jpeg||height="46" width="53"]]NOTE
185	185	|(((
186		- During installation, cover the top of the product with cloth or paper to prevent foreign bodies such as metal shavings, oil, and water from entering the inside of the product during drilling and causing product failure. After the operation, please remove the cover to avoid blocking the ventilation hole and affecting heat dissipation, resulting in abnormal heating of the product.
	186	+[[image:1762401041270-619.jpeg]]NOTE
187	187
	188	+During installation, cover the top of the product with cloth or paper to prevent foreign bodies such as metal shavings, oil, and water from entering the inside of the product during drilling and causing product failure. After the operation, please remove the cover to avoid blocking the ventilation hole and affecting heat dissipation, resulting in abnormal heating of the product.
	189	+
188	188	Resonance may occur when a machine operating at a constant speed is operated with variable speeds. At this time, install anti-vibration under the motor frame.
189	189
190	190	Rubber or use vibration suppression function, can effectively reduce the resonance.
191	191	)))
192	192	|**Wiring**
193		-|(% style="text-align:center" %)(((
194		-[[image:1762401041270-150.jpeg||height="45" width="52"]]DANGER
195		-)))
196	196	|(((
	196	+[[image:1762401041270-150.jpeg]]DANGER
	197	+
197	197	Non-professional personnel are strictly prohibited from equipment installation, wiring, maintenance, inspection or parts replacement!
198	198
199	199	Before wiring, please cut off the power to all devices. After the power supply is turned off, the internal capacitor has residual voltage. Wait at least the time specified in the warning label before connecting cables. Measure the DC voltage of the main circuit and confirm that it is under the safe voltage, otherwise there is the risk of electric shock.
...	...	@@ -202,10 +202,9 @@
202	202
203	203	Ensure that devices and products are properly grounded; otherwise, electric shocks may occur.
204	204	)))
205		-|(% style="text-align:center" %)(((
206		-[[image:1762401041271-454.jpeg]]WARNING
207		-)))
208	208	|(((
	207	+[[image:1762401041271-454.jpeg]]WARNING
	208	+
209	209	Do not connect the input power to the output of the device or product, otherwise it will cause damage to the device and even cause a fire.
210	210
211	211	When the drive device is connected to the motor, be sure to ensure that the phase sequence of the product and the motor terminal is accurate and consistent to avoid the reverse rotation of the motor.
...	...	@@ -216,19 +216,17 @@
216	216
217	217	After the cable connection is complete, ensure that all cables are correctly connected, and there are no dropped screws, gaskets, or bare cables in the product Risk of electric shock or damage to the product.
218	218	)))
219		-|(% style="text-align:center" %)(((
220		-[[image:1762401041271-177.jpeg]]NOTE
221		-)))
222	222	|(((
	220	+[[image:1762401041271-177.jpeg]]NOTE
	221	+
223	223	Please follow the steps specified in ESD preventive measures and wear an ESD bracelet for wiring and other operations to avoid damaging the circuit inside the device or product.
224	224
225	225	When wiring the control loop, please use double-stranded shield wire to connect the shield layer to the grounding terminal of the product for grounding, otherwise it will cause abnormal operation of the product.
226	226	)))
227	227	|**Power-on**
228		-|(% style="text-align:center" %)(((
229		-[[image:1762401041272-340.jpeg]]DANGER
230		-)))
231	231	|(((
	228	+[[image:1762401041272-340.jpeg]]DANGER
	229	+
232	232	Before powering on, please confirm that the product is installed well, the wiring is firm, and the motor device is allowed to restart.
233	233
234	234	Before powering on, please confirm that the power supply meets the product requirements to avoid product damage or fire!
...	...	@@ -235,10 +235,9 @@
235	235
236	236	It is strictly prohibited to open the door of the product cabinet or the product protection cover plate, touch any terminal of the product, disassemble any device or component of the product in the energized state, otherwise there is a risk of electric shock!
237	237	)))
238		-|(% style="text-align:center" %)(((
239		-[[image:1762401041272-256.jpeg]]WARNING
240		-)))
241	241	|(((
	237	+[[image:1762401041272-256.jpeg]]WARNING
	238	+
242	242	After the wiring operation and parameter setting is completed, please conduct a trial run of the machine to confirm that the machine can operate safely, otherwise it may lead to injuries or equipment damage.
243	243
244	244	Before power on, please ensure that the rated voltage of the product is consistent with the power supply voltage. If the power supply voltage is used incorrectly, there is a risk of fire.
...	...	@@ -245,28 +245,25 @@
245	245
246	246	Before powering on the machine, ensure that no one is around the machine, motor, or machine, as this may result in injury or death.
247	247	)))
248		-|**Runtime**|
249		-|(% style="text-align:center" %)(((
250		-[[image:1762401041272-732.jpeg]]DANGER
251		-)))|
	245	+|**Runtime**
252	252	|(((
	247	+[[image:1762401041272-732.jpeg]]DANGER
	248	+
253	253	Non-professional personnel are strictly prohibited from running the product, otherwise it will lead to injury or death!
254	254
255	255	It is strictly forbidden to touch any terminal of the equipment, disassemble any device or component of the equipment and product in the running state, otherwise there is a risk of electric shock!
256	256	)))
257		-|(% style="text-align:center" %)(((
258		-[[image:1762401041273-313.jpeg]]WARNING
259		-)))
260	260	|(((
	254	+[[image:1762401041273-313.jpeg]]WARNING
	255	+
261	261	Do not touch the device housing, fan or resistor to test the temperature, otherwise it may cause burns!
262	262
263	263	During operation, avoid other items or metal objects falling into the equipment, otherwise it may cause fire or product damage!
264	264	)))
265	265	|**Maintenance Time**
266		-|(% style="text-align:center" %)(((
267		-[[image:1762401041273-926.jpeg]]DANGER
268		-)))
269	269	|(((
	262	+[[image:1762401041273-926.jpeg]]DANGER
	263	+
270	270	Non-professional personnel are strictly prohibited from equipment installation, wiring, maintenance, inspection or parts replacement!
271	271
272	272	It is strictly prohibited to carry out equipment maintenance in the energized state, otherwise there is the risk of electric shock!
...	...	@@ -275,17 +275,15 @@
275	275
276	276	When using a PM motor, even if the power supply of the product is turned off, an induced voltage is generated on the motor terminals during the motor rotation. Do not touch the terminal of the motor, otherwise there may be a risk of electric shock.
277	277	)))
278		-|(% style="text-align:center" %)(((
	272	+|(((
279	279	[[image:1762401041273-513.jpeg]]WARNING
	274	+
	275	+Please check and maintain the equipment and products daily and regularly according to the equipment maintenance and maintenance requirements, and make maintenance records.
280	280	)))
281		-|(((
282		- Please check and maintain the equipment and products daily and regularly according to the equipment maintenance and maintenance requirements, and make maintenance records.
283		-)))
284	284	|**Maintain**
285		-|(% style="text-align:center" %)(((
286		-[[image:1762401041274-280.jpeg]]DANGER
287		-)))
288	288	|(((
	279	+[[image:1762401041274-280.jpeg]]DANGER
	280	+
289	289	Non-professional personnel are strictly prohibited from equipment installation, wiring, maintenance, inspection or parts replacement!
290	290
291	291	It is strictly prohibited to carry out equipment maintenance in the energized state, otherwise there is the risk of electric shock!
...	...	@@ -292,12 +292,11 @@
292	292
293	293	After powering off all devices, wait at least the time specified in the warning label before checking or maintaining the devices.
294	294	)))
295		-|(% style="text-align:center" %)(((
296		-[[image:1762401041274-562.jpeg]]WARNING
297		-)))
298	298	|(((
299		- Please repair the equipment according to the product warranty agreement.
	288	+[[image:1762401041274-562.jpeg]]WARNING
300	300
	290	+Please repair the equipment according to the product warranty agreement.
	291	+
301	301	When the fuse is blown, the circuit breaker is tripped or the leakage circuit breaker (ELCB) is tripped, please wait at least the time specified on the warning label on the product before switching on the power or operating the machine, otherwise it may cause casualties and equipment damage.
302	302
303	303	When the equipment fails or is damaged, it is necessary for professionals to troubleshoot and repair the equipment and products according to the maintenance guidance, and make maintenance records.
...	...	@@ -309,10 +309,9 @@
309	309	After replacing the device, check cable connections and set parameters again.
310	310	)))
311	311	|**Scrap**
312		-|(% style="text-align:center" %)(((
313		-[[image:1762401041274-704.jpeg]]WARINING
314		-)))
315	315	|(((
	304	+[[image:1762401041274-704.jpeg]]WARINING
	305	+
316	316	Please scrap equipment and products in accordance with relevant national regulations and standards to avoid property losses or casualties!
317	317
318	318	Waste equipment and products should be recycled in accordance with industrial waste treatment standards to avoid environmental pollution.