Skip to Content

Changes for page LX6V-4PT

Last modified by Iris on 2026/03/24 15:34
From version 2.1
edited by Iris
on 2025/10/30 10:03
Change comment: There is no comment for this version
To version 9.1
edited by Iris
on 2025/10/30 11:17
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,8 +1,8 @@
1 -1. **Introduction**
1 += **1 Introduction** =
2 2  
3 +(% style="text-align:center" %)
4 +[[image:1761790581619-130.png||height="397" width="397"]]
3 3  
4 -
5 -
6 6  LX6V-4PT (4-channal analog inputs), used for the acquisition of thermocouple input analog signals. Suitable for Wecon LX6 series PLC and LX6V-EM□-ECAT coupler.
7 7  
8 8  LX6V-EM□-ECAT firmware version that supports this module: V2.022 and above, the corresponding XML version: 1.3 and above.
... ... @@ -9,59 +9,63 @@
9 9  
10 10  Upper computer software version that supports this module: 2.6. 236 and above, PLC firmware version:2.321. 1032 and above.
11 11  
12 -
13 13  **✎Note: **The total power of expansion modules connected to LX6 series PLC and LX6V-EM□-ECAT cannot be greater than 48W.
14 14  
15 -1. **Appearance and terminal description**
16 -11. **Appearance and size**
14 += **2 Appearance and terminal description** =
17 17  
16 +== **2.1 ​​​​​Appearance and size** ==
18 18  
18 +(% style="text-align:center" %)
19 +[[image:1761790728530-525.png]]
19 19  
20 -[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml8120\wps5.png]]
21 +① LED; ② Terminal; ③ Expansion module interface; ④ Mounting hole: 2 places (Φ4.5); ⑤ DIN rail buckle.
21 21  
22 -① LED; ② Terminal; ③ Expansion module interface; ④ Mounting hole: 2 places (Φ4.5);
23 +== **2.2 Terminal description** ==
23 23  
24 -⑤ DIN rail buckle.
25 -
26 -
27 -1.
28 -11. **Terminal description**
29 -
30 30  The 4PT expansion module terminal are arranged as follows:
31 31  
27 +(% style="margin-left:auto; margin-right:auto" %)
28 +|=(((
29 +**Module model**
30 +)))|=(% colspan="2" rowspan="1" %)(((
31 +**Terminal arrangement**
32 +)))
33 +|=(((
34 +LX6V-4PT
35 +)))|(((
36 +(% style="text-align:center" %)
37 +[[image:1761790846633-145.png]]
38 +)))|(((
39 +(% style="text-align:center" %)
40 +[[image:1761790839326-892.png]]
41 +)))
32 32  
33 -|**Module model**|(% colspan="2" %)**Terminal arrangement**
34 -|LX6V-4PT||[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml8120\wps7.png]]
43 +== **2.3** **Installation** ==
35 35  
36 -
37 -
38 -1.
39 -11. **Installation**
40 -
41 41  Please install the end cover on the right side of the last expansion module, align it with the module interface slot and connect it, as shown in the figure below:
42 42  
43 -[[image:file:///C:\Users\Administrator\AppData\Local\Temp\ksohtml8120\wps8.png]]
47 +(% style="text-align:center" %)
48 +[[image:图片7.png||height="303" width="577"]]
44 44  
50 +== **2.4 Indicator** ==
45 45  
46 -1.
47 -11. **Indicator**
48 -
49 49  The 4PT expansion module LED is shown below:
50 50  
51 -|**Indicator**|**Description**
52 -|PWR|(((
54 +(% style="margin-left:auto; margin-right:auto" %)
55 +|=**Indicator**|=**Description**
56 +|=PWR|(((
53 53  Power indicator
54 54  
55 55  1. Lights on: The module is powered on normally
56 56  1. Lights out: The module is not powered on or the module is abnormal
57 57  )))
58 -|LINK|(((
62 +|=LINK|(((
59 59  Communication indicator
60 60  
61 61  1. Lights on: Data interaction is normal
62 62  1. Lights out: Data interaction is abnormal or stopped
63 63  )))
64 -|L1+/L2+/L3+/L4 +|(((
68 +|=L1+/L2+/L3+/L4 +|(((
65 65  Channel indicator
66 66  
67 67  1. Lights on: Channel enable
... ... @@ -69,50 +69,45 @@
69 69  1. Slow flash: Channel not calibrated
70 70  1. Fast flash: Channel abnormal (refer to status code for details)
71 71  )))
72 -|L1-/L2-/L3-/L4-|N/A
73 -|I1+/I2+/I3+/I4 +|N/A
76 +|=L1-/L2-/L3-/L4-|(% style="text-align:center" %)N/A
77 +|=I1+/I2+/I3+/I4 +|(% style="text-align:center" %)N/A
74 74  
79 +== **3 Parameter Specification** ==
75 75  
81 +=== **3.1 Input Specification** ===
76 76  
83 +(% style="margin-left:auto; margin-right:auto" %)
84 +|=**Item**|=**Description**
85 +|=Input channel|(% style="text-align:center" %)4
86 +|=Digital resolution|(% style="text-align:center" %)16 bit
87 +|=Sensitivity|(% style="text-align:center" %)0.01℃, 0.01℉
88 +|=Input terminal|(% style="text-align:center" %)Thermocouple input
89 +|=Sensor type|(% style="text-align:center" %)PT100, PT1000, CU50
90 +|=Accuracy (normal temperature 25℃)|(% style="text-align:center" %)Full range ± 0.2%
91 +|=Accuracy (working temperature -20℃ to 55℃)|(% style="text-align:center" %)Full range ± 0. 3%
92 +|=Isolation or not|(% style="text-align:center" %)I/O terminals are isolated from power supply, channels are not isolated
93 +|=Overlimit disconnection detection|(% style="text-align:center" %)Support
94 +|=Power consumption|(% style="text-align:center" %)< 1.1W
95 +|=Power supply|(% style="text-align:center" %)Power supply via interface, DC24V±10%, 40mA
77 77  
78 -1. **Parameter Specification**
79 -11. **Input Specification**
97 +== **3.2 Environmental specification** ==
80 80  
81 -|**Item**|**Description**
82 -|Input channel|4
83 -|Digital resolution|16 bit
84 -|Sensitivity|0.01℃, 0.01℉
85 -|Input terminal|Thermocouple input
86 -|Sensor type|PT100, PT1000, CU50
87 -|Accuracy (normal temperature 25℃)|Full range ± 0.2%
88 -|Accuracy (working temperature -20℃ to 55℃)|Full range ± 0. 3%
89 -|Isolation or not|I/O terminals are isolated from power supply, channels are not isolated
90 -|Overlimit disconnection detection|Support
91 -|Power consumption|< 1.1W
92 -|Power supply|Power supply via interface, DC24V±10%, 40mA
93 -
94 -
95 -
96 -1.
97 -11. **Environmental specification**
98 -11.
99 -**Software Specifications**
100 -
101 -|**Item**|(% colspan="5" %)**Specification**
102 -|Usage environment|(% colspan="5" %)No corrosive, combustible gas, no large amount of conductive dust
103 -|Environment temperature|(% colspan="5" %)(((
99 +(% style="margin-left:auto; margin-right:auto" %)
100 +|=**Item**|=(% colspan="5" %)**Specification**
101 +|=Usage environment|(% colspan="5" style="text-align:center" %)No corrosive, combustible gas, no large amount of conductive dust
102 +|=Environment temperature|(% colspan="5" style="text-align:center" %)(((
104 104  Working temperature: 0℃ to 55℃
105 105  
106 106  Storage temperature: -20℃ to 70℃
107 107  )))
108 -|Environment humidity|(% colspan="5" %)(((
107 +|=(% style="text-align: center;" %)Environment humidity|(% colspan="5" style="text-align:center" %)(((
109 109  Working humidity: 10% to 90%RH (no condensation)
110 110  
111 111  Storage humidity: ≤ 90% RH (no condensation)
112 112  )))
113 -|Installation|(% colspan="5" %)Snap mount on DIN46277 (width 35mm) rail or direct positioning hole mount
114 -|(% rowspan="6" %)Vibration resistance|(% colspan="5" %)According to JISC0040 standard
115 -|Installation|Frequency|Acceleration|Amplitude|(% rowspan="5" %)(((
112 +|=Installation|(% colspan="5" style="text-align:center" %)Snap mount on DIN46277 (width 35mm) rail or direct positioning hole mount
113 +|=(% rowspan="6" %)Vibration resistance|(% colspan="5" style="text-align:center" %)According to JISC0040 standard
114 +|=Installation|(% style="text-align:center" %)Frequency|(% style="text-align:center" %)Acceleration|(% style="text-align:center" %)Amplitude|(% rowspan="5" %)(((
116 116  X, Y, Z
117 117  
118 118  10 times in each of three directions
... ... @@ -119,58 +119,56 @@
119 119  
120 120  (80 minutes in each direction)
121 121  )))
122 -|(% rowspan="2" %)DIN rail installation|10 to 57Hz|~-~-|0.035mm
123 -|57 to 150Hz|4.9m/S^^2^^|~-~-
124 -|(% rowspan="2" %)Direct installation|10 to 57Hz|~-~-|0.075mm
125 -|57 to 150Hz|9.8m/S^^2^^|~-~-
126 -|Shock resistance|(% colspan="5" %)(((
121 +|=(% rowspan="2" %)DIN rail installation|(% style="text-align:center" %)10 to 57Hz|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0.035mm
122 +|=(% style="text-align: center;" %)57 to 150Hz|(% style="text-align:center" %)4.9m/S^^2^^|(% style="text-align:center" %)~-~-
123 +|=(% rowspan="2" %)Direct installation|(% style="text-align:center" %)10 to 57Hz|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0.075mm
124 +|=(% style="text-align: center;" %)57 to 150Hz|(% style="text-align:center" %)9.8m/S^^2^^|(% style="text-align:center" %)~-~-
125 +|=Shock resistance|(% colspan="5" %)(((
127 127  Compliant with JISC0041 standard
128 128  
129 129  (147 m/S^^2^^, action time 11ms, three sinusoidal half-wave pulses in each of X, Y, and Z directions)
130 130  )))
131 -|EMC immunity level|(% colspan="5" %)Zone B (per IEC 61131-2)
132 -|Altitude requirements|(% colspan="5" %)≤2000m (80 kPa)
133 -|Protection level|(% colspan="5" %)IP20
134 -|Grounding|(% colspan="5" %)Not co-located with the strong current system
130 +|=EMC immunity level|(% colspan="5" style="text-align:center" %)Zone B (per IEC 61131-2)
131 +|=Altitude requirements|(% colspan="5" style="text-align:center" %)≤2000m (80 kPa)
132 +|=Protection level|(% colspan="5" style="text-align:center" %)IP20
133 +|=Grounding|(% colspan="5" style="text-align:center" %)Not co-located with the strong current system
135 135  
136 -|**Item**|**Specification**
137 -|Input PDO data volume|Maximum 24 byte
138 -|Diagnostic reporting function configuration|Support
139 -|Diagnostic detection enable configuration|Support overlimit and disconnection detection
140 -|Sensor type configuration|(((
135 +== **3.3 Software Specifications** ==
136 +
137 +|(% style="text-align:center" %)**Item**|(% style="text-align:center" %)**Specification**
138 +|(% style="text-align:center" %)Input PDO data volume|(% style="text-align:center" %)Maximum 24 byte
139 +|(% style="text-align:center" %)Diagnostic reporting function configuration|(% style="text-align:center" %)Support
140 +|(% style="text-align:center" %)Diagnostic detection enable configuration|(% style="text-align:center" %)Support overlimit and disconnection detection
141 +|(% style="text-align:center" %)Sensor type configuration|(% style="text-align:center" %)(((
141 141  Support thermal resistor type: PT100, PT1000, CU50, default is
142 142  
143 143  PT100 thermal resistance
144 144  )))
145 -|Filter time|0s to 100s (can be configured by software, default 5s)
146 -|Overflow detection|Support
147 -|Overlimit detection enable configuration|Support
148 -|Independent channel configuration|Support
149 -|Temperature offset enable configuration|Support
150 -|Temperature offset configuration range|-300 to +300, temperature unit
151 -|Display mode|Celsius (℃), Fahrenheit (℉)
152 -|Display sensitivity|0.01℃, 0.01℉
153 -|Sample refresh|Refresh asynchronously according to the sampling time, do not require synchronization refresh according to the bus cycle
154 -|Stop mode|Output according to the maximum value, no more refresh
155 -|Disconnected or overlimit|Output according to the maximum value, no more refresh
156 -|System diagnostics|System power abnormality
157 -|Channel diagnosis|Over upper limit alarm, over lower limit alarm, disconnection alarm, overflow alarm
158 -|Configuration diagnostics|Configuration error identification, channel parameter configuration error
146 +|(% style="text-align:center" %)Filter time|(% style="text-align:center" %)0s to 100s (can be configured by software, default 5s)
147 +|(% style="text-align:center" %)Overflow detection|(% style="text-align:center" %)Support
148 +|(% style="text-align:center" %)Overlimit detection enable configuration|(% style="text-align:center" %)Support
149 +|(% style="text-align:center" %)Independent channel configuration|(% style="text-align:center" %)Support
150 +|(% style="text-align:center" %)Temperature offset enable configuration|(% style="text-align:center" %)Support
151 +|(% style="text-align:center" %)Temperature offset configuration range|(% style="text-align:center" %)-300 to +300, temperature unit
152 +|(% style="text-align:center" %)Display mode|(% style="text-align:center" %)Celsius (℃), Fahrenheit (℉)
153 +|(% style="text-align:center" %)Display sensitivity|(% style="text-align:center" %)0.01℃, 0.01℉
154 +|(% style="text-align:center" %)Sample refresh|(% style="text-align:center" %)Refresh asynchronously according to the sampling time, do not require synchronization refresh according to the bus cycle
155 +|(% style="text-align:center" %)Stop mode|(% style="text-align:center" %)Output according to the maximum value, no more refresh
156 +|(% style="text-align:center" %)Disconnected or overlimit|(% style="text-align:center" %)Output according to the maximum value, no more refresh
157 +|(% style="text-align:center" %)System diagnostics|(% style="text-align:center" %)System power abnormality
158 +|(% style="text-align:center" %)Channel diagnosis|(% style="text-align:center" %)Over upper limit alarm, over lower limit alarm, disconnection alarm, overflow alarm
159 +|(% style="text-align:center" %)Configuration diagnostics|(% style="text-align:center" %)Configuration error identification, channel parameter configuration error
159 159  
161 +== **3.4 Accuracy calculation** ==
160 160  
161 -
162 -
163 -1.
164 -11. **Accuracy calculation**
165 -
166 166  Within the working temperature range, when the temperature change rate is less than 0.3°C/min, the accuracy of this product = ADC sampling accuracy + line resistance error + contact impedance error. According to the measure principle, it is necessary to wait for the module to be powered on for 45 minutes before measuring.
167 167  
168 -|**Sensor type**|**Detection range**|**Accuracy**
169 -|PT100|(((
165 +|(% style="text-align:center" %)**Sensor type**|(% style="text-align:center" %)**Detection range**|(% style="text-align:center" %)**Accuracy**
166 +|(% style="text-align:center" %)PT100|(% style="text-align:center" %)(((
170 170  -200.0℃ to +850.0℃，
171 171  
172 172  -328.0℉ to +1562.0℉
173 -)))|(((
170 +)))|(% style="text-align:center" %)(((
174 174  T < 300°C: ±0.6℃
175 175  
176 176  300℃ ≤ T ≤ 700℃: ±1.4℃
... ... @@ -177,11 +177,11 @@
177 177  
178 178  T > 700°C: ±1.7℃
179 179  )))
180 -|PT1000|(((
177 +|(% style="text-align:center" %)PT1000|(% style="text-align:center" %)(((
181 181  -200.0℃ to +850.0℃，
182 182  
183 183  -328.0℉ to +1562.0℉
184 -)))|(((
181 +)))|(% style="text-align:center" %)(((
185 185  T < 300°C: ±0.6℃
186 186  
187 187  300℃ ≤ T ≤ 700℃: ±1.4℃
... ... @@ -188,8 +188,298 @@
188 188  
189 189  T > 700 °C: ±1.7℃
190 190  )))
191 -|CU50|(((
188 +|(% style="text-align:center" %)CU50|(% style="text-align:center" %)(((
192 192  -50.0℃ to + 150.0℃，
193 193  
194 194  -58.0℉ to +302.0℉
195 -)))|-50℃ ≤ T ≤ 150℃: ±0.3℃
192 +)))|(% style="text-align:center" %)-50℃ ≤ T ≤ 150℃: ±0.3℃
193 +
194 += **4 Usage** =
195 +
196 +This module is suitable for Wecon LX6 series PLC and LX6V-EM□-ECAT coupler. The two usage methods are as follow.
197 +
198 +== **4.1 Use on LX6V/LX6S** ==
199 +
200 +(% style="text-align:center" %)
201 +[[image:图片8.png]]
202 +
203 +**(1 ) Add Module**
204 +
205 +Steps:
206 +
207 +① Double-click the expansion module configuration to open the configuration interface;
208 +
209 +② In the module list, select LX6V-4PT and double-click to add a module;
210 +
211 +③ Double-click the module in the current machine slot to open the parameter configuration interface;
212 +
213 +(% style="text-align:center" %)
214 +[[image:图片1.png]]
215 +
216 +**(2) Configuration module**
217 +
218 +**~ 1) General configuration**
219 +
220 +(% style="text-align:center" %)
221 +[[image:1761790435591-998.jpeg]]
222 +
223 +① Temperature unit: Set the temperature unit for the module output. The supported temperature unit types are Celsius (℃) or Fahrenheit (℉), the default unit is: Celsius;
224 +
225 +② Power frequency suppression: It can eliminate or reduce electromagnetic interference from the power system frequency (50Hz or 60Hz) on electronic equipment, especially signal acquisition systems. The power frequency suppression can be set to the module according to the actual application scenario.
226 +
227 +**~ 2) Channel configuration**
228 +
229 +(% style="text-align:center" %)
230 +[[image:1761790435593-675.jpeg]]
231 +
232 +① Enable channels: It can be set whether to enable the current expansion module channel;
233 +
234 +② Sensor type: Set the sensor type connected to the module channel, the default sensor type is PT100, there are three sensor types supported by the PT module, which are: PT100, PT1000, CU50;
235 +
236 +③ Filtering time: The supported filtering time is 0 to 100s, it is used to reduce fluctuations in channel temperature data. The default filtering time is 5s. Please choose the appropriate filtering time according to the requirements of actual application scenarios for channel output data;
237 +
238 +④ Enable overlimit detection: Channel temperature data overlimit judgment switch, when overlimit detection is enabled, the upper and lower limits of temperature can be set. When the temperature output by the channel is greater than the upper limit of temperature or less than the lower limit of temperature, the state of this channel will output a channel overlimit warning;
239 +
240 +⑤ Enable temperature offset: Channel temperature data offset enable switch. When temperature offset is enabled, the output temperature data of the channel will be offset;
241 +
242 +**~ 3) I/O mapping**
243 +
244 +By default, channels are mapped to R device according to the number of current module channels. The figure below maps modules CH1 ~~ CH12 to R0 ~~ R11 device. The data type of temperature value of channel is REAL. If want to display the temperature value of channel 1, the temperature value can be viewed after assigning a variable using the DEMOV instruction.
245 +
246 +(% style="text-align:center" %)
247 +[[image:1761790435595-524.jpeg||height="638" width="806"]]
248 +
249 +Supported status codes:
250 +
251 +* 0x00: Channel normal;
252 +* 0x40: Channel disconnection;
253 +* 0x41: Channel overflow;
254 +* 0x42: Channel overrun;
255 +
256 +**(3) Download configuration**
257 +
258 +After the module configuration is completed and the program is compiled correctly, the project can be downloaded (at present, it is not supported to download the extension module configuration separately). Before downloading, make sure that the connected expansion module model and configuration model are in the same order. Otherwise, the PLC will report an error and stop running.
259 +
260 +(% style="text-align:center" %)
261 +[[image:图片2.png]]
262 +
263 +== **4.2 Used on LX6V-EM□-ECAT coupler** ==
264 +
265 +(% style="text-align:center" %)
266 +[[image:1761791932607-101.png]]
267 +
268 +**(1) First  add EtherCAT device**
269 +
270 +According to steps ① to ④ in the figure below, right-click EtherCAT, and click [New]->[Import] to import the ESI device description file of the device;
271 +
272 +(% style="text-align:center" %)
273 +[[image:图片3.png]]
274 +
275 +After the import is completed, select the coupler according to the module model and location connected to PLC. (the figure below takes LX6V-EMB-ECAT as an example);
276 +
277 +(% style="text-align:center" %)
278 +[[image:1761790435610-644.jpeg]]
279 +
280 +**(2) Configuration module**
281 +
282 +Right-click the currently added coupler to add the expansion module mounted to the current coupler.
283 +
284 +(% style="text-align:center" %)
285 +[[image:图片4.png]]
286 +
287 +**✎Note: **When the configuration module is inconsistent with the actual mounted module, an error will be reported that the OP cannot be successful.
288 +
289 +**(3) Start configuration**
290 +
291 +(% style="text-align:center" %)
292 +[[image:图片5.png||alt="1761790435644-648.jpeg"]]
293 +
294 +
295 +(% style="text-align:center" %)
296 +[[image:图片6.png]]
297 +
298 +① PT module temperature unit: Set the temperature unit for the module output. The supported temperature unit types are Celsius (℃) or Fahrenheit (℉), the default unit is: Celsius;
299 +
300 +0: Degree Celsius (℃);
301 +
302 +Others: Degree Fahrenheit (℉)
303 +
304 +② PT module power frequency support: Set the power frequency suppression of the module to suppress 50Hz or suppress 60Hz, and the default suppression is 50Hz;
305 +
306 +0: Suppress 50 Hz;
307 +
308 +Others: Suppress 60 Hz;
309 +
310 +③ reserve: Reserve
311 +
312 +④ CHx sensor type: Set the type of sensor external to the channel;
313 +
314 +Supported sensor types:
315 +
316 +0: Disable
317 +
318 +1: PT100;
319 +
320 +3: PT1000
321 +
322 +4: CU50;
323 +
324 +⑤ CHx filter time: Used to specify the filtering time of the current channel. The supported filtering time is 0 to 100s, it is used to reduce the fluctuation of channel temperature data. The default filtering time is 5s;
325 +
326 +⑥ CHx over limit detection: Overlimit detection enable configuration, 0: Overlimit detection detection is not enabled, others: Enable overlimit detection
327 +
328 +⑦ CHx temperature upper limit: The upper limit value of the channel overlimit detection temperature;
329 +
330 +⑧ CHx temperature lower limit: The lower limit value of the channel overlimit detection temperature;
331 +
332 +⑨ CHx temperature offset: The offset of channel data, supported offset range:-300 to +300；
333 +
334 +**I/O mapping**
335 +
336 +The temperature and state of the module can be mapped to variables/device. For example, the following figure maps the temperature values of the CH0 to CH3 channels to the D0 to D7 device, and the status codes of the CH0 to CH3 channels to the D8 to D11 device.
337 +
338 +(% style="text-align:center" %)
339 +[[image:1761790435666-763.jpeg]]
340 +
341 +Click save configuration and download the configuration to PLC.
342 +
343 += **5 Object dictionary** =
344 +
345 +|(% style="text-align:center; width:77px" %)(((
346 +**Index**
347 +
348 +**（16#）**
349 +)))|(% style="text-align:center; width:142px" %)(((
350 +**Sub-index**
351 +
352 +**（16#）**
353 +)))|(% style="text-align:center; width:288px" %)**Description**|(% style="text-align:center" %)(((
354 +**Data**
355 +
356 +**Type**
357 +)))|(% style="text-align:center" %)**Range**|(% style="text-align:center" %)**Read-write support**|(% style="text-align:center" %)**Unit**|(% style="text-align:center" %)**Default**|(% style="text-align:center" %)**Name**
358 +|(% rowspan="5" style="text-align:center; width:77px" %)8000|(% style="text-align:center; width:142px" %)01|(% style="width:288px" %)(((
359 +PT module temperature unit
360 +
361 +0: Degree Celsius (℃)
362 +
363 +Others: Degrees Fahrenheit (℉)
364 +)))|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)PT module temperature unit
365 +|(% style="text-align:center; width:142px" %)02|(% style="width:288px" %)(((
366 +PT module power frequency suppression
367 +
368 +0: Suppress 50 Hz
369 +
370 +Others: Suppress 60Hz
371 +)))|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)PT module power frequency suppression
372 +|(% style="text-align:center; width:142px" %)03|(% style="width:288px" %)Reserve parameter 0|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)Reserve 0
373 +|(% style="text-align:center; width:142px" %)04|(% style="width:288px" %)Reserve Parameter 1|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)Reserve 1
374 +|(% style="text-align:center; width:142px" %)05|(% style="width:288px" %)Reserve parameter 2|(% style="text-align:center" %)UINT8|(% style="text-align:center" %)0 to 255|(% style="text-align:center" %)W|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)0|(% style="text-align:center" %)Reserve 2
375 +|(% rowspan="4" style="text-align:center; width:77px" %)8001|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
376 +Sensor type
377 +
378 +0: Disable
379 +
380 +1: PT100
381 +
382 +3: PT1000
383 +
384 +4: CU50
385 +
386 +Others: Not supported
387 +)))|(% rowspan="4" style="text-align:center" %)UINT8|(% rowspan="4" style="text-align:center" %)0 to 4|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)1|(% style="text-align:center" %)CH0 sensor type
388 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 sensor type
389 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 sensor type
390 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 sensor type
391 +|(% rowspan="4" style="text-align:center; width:77px" %)8002|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
392 +PT module channel filtering time: 0 to 100s
393 +
394 +Others: 100s
395 +)))|(% rowspan="4" style="text-align:center" %)UINT8|(% rowspan="4" style="text-align:center" %)0 to 255|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)s|(% rowspan="4" style="text-align:center" %)5|(% style="text-align:center" %)CH0 filter time
396 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 filter time
397 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 filter time
398 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 filter time
399 +|(% rowspan="4" style="text-align:center; width:77px" %)8003|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
400 +Overlimit detection enable
401 +
402 +0: Disable
403 +
404 +Others: Enable
405 +)))|(% rowspan="4" style="text-align:center" %)UINT8|(% rowspan="4" style="text-align:center" %)0 to 255|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)0|(% style="text-align:center" %)CH0 overlimit detection
406 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 overlimit detection
407 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 overlimit detection
408 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 overlimit detection
409 +|(% rowspan="4" style="text-align:center; width:77px" %)8004|(% style="text-align:center; width:142px" %)01|(% rowspan="8" style="width:288px" %)(((
410 +Temperature unit: 0.1℃/0.1℉
411 +
412 +The upper and lower limits of sensors are different for each model
413 +)))|(% rowspan="4" style="text-align:center" %)INT32|(% rowspan="4" style="text-align:center" %)-32768 to 40000|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)32767|(% style="text-align:center" %)CH0 temperature upper limit
414 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 temperature upper limit
415 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 temperature upper limit
416 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 temperature upper limit
417 +|(% rowspan="4" style="text-align:center; width:77px" %)8005|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="text-align:center" %)INT32|(% rowspan="4" style="text-align:center" %)-32768 to 40000|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)-32768|(% style="text-align:center" %)CH0 temperature lower limit
418 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 temperature lower limit
419 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH1 temperature lower limit
420 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 temperature lower limit
421 +|(% rowspan="4" style="text-align:center; width:77px" %)8006|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
422 +Offset temperature value (0.1℃/0.1 ℉)
423 +
424 +0: No offset
425 +
426 +
427 +)))|(% rowspan="4" style="text-align:center" %)INT16|(% rowspan="4" style="text-align:center" %)-3000 to 3000|(% rowspan="4" style="text-align:center" %)W|(% rowspan="4" style="text-align:center" %)~-~-|(% rowspan="4" style="text-align:center" %)0|(% style="text-align:center" %)CH0 temperature offset
428 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)CH1 temperature offset
429 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)CH2 temperature offset
430 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)CH3 temperature offset
431 +|(% rowspan="3" style="text-align:center; width:77px" %)A000|(% style="text-align:center; width:142px" %)00|(% style="width:288px" %)Module status information|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)Module status
432 +|(% style="text-align:center; width:142px" %)01|(% style="width:288px" %)Version code|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)Version
433 +|(% style="text-align:center; width:142px" %)02|(% style="width:288px" %)Error status|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)Run status
434 +|(% rowspan="4" style="text-align:center; width:77px" %)6000|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
435 +PT CH0 to CH3 channel current temperature value (℃/℉)
436 +
437 +
438 +)))|(% style="text-align:center" %)Float|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH0 temperature
439 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)Float|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH1 temperature
440 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)Float|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH2 temperature
441 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)Float|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH3 temperature
442 +|(% rowspan="4" style="text-align:center; width:77px" %)6001|(% style="text-align:center; width:142px" %)01|(% rowspan="4" style="width:288px" %)(((
443 +PT CH0 to CH3 status code
444 +
445 +0, no error
446 +
447 +0xFF, sensor not supported
448 +
449 +0x10, configuration error: Temperature overlimit configuration
450 +
451 +0x11, configuration error: The upper limit of the overlimit configuration is less than the lower limit
452 +
453 +0x12, configuration error: Temperature offset configuration temperature overlimit
454 +
455 +0x13, configuration error: NTC B value overlimit
456 +
457 +0x40, channel disconnection error
458 +
459 +0x41, channel temperature overflow
460 +
461 +0x42, channel temperature overlimit
462 +)))|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH0 status
463 +|(% style="text-align:center; width:142px" %)02|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH1 status
464 +|(% style="text-align:center; width:142px" %)03|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH2 status
465 +|(% style="text-align:center; width:142px" %)04|(% style="text-align:center" %)UINT16|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)R|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)~-~-|(% style="text-align:center" %)PT CH3 status
466 +
467 += **6 Error code** =
468 +
469 +|(% style="text-align:center" %)**Error code**|(% style="text-align:center; width:354px" %)**Description**|(% style="text-align:center; width:153px" %)**Action**|(% style="text-align:center; width:366px" %)**Solution**|(% style="text-align:center; width:161px" %)**Detect time**
470 +|(% style="text-align:center" %)7080|(% style="width:354px" %)Expansion module and checksum error|(% style="text-align:center; width:153px" %)Continue to run|(% style="width:366px" %)Detect whether there is external interference between the expansion module and the PLC.|(% style="text-align:center; width:161px" %)Instruction running
471 +|(% style="text-align:center" %)7081|(% style="width:354px" %)Expansion module communication message error|(% style="text-align:center; width:153px" %)Continue to run|(% style="width:366px" %)Detect whether there is external interference between the expansion module and the PLC.|(% style="text-align:center; width:161px" %)Instruction running
472 +|(% style="text-align:center" %)7083|(% style="width:354px" %)Expansion module access error|(% style="text-align:center; width:153px" %)Continue to run|(% style="width:366px" %)Detect the link between the expansion module and the host|(% style="text-align:center; width:161px" %)Instruction running
473 +|(% style="text-align:center" %)7084|(% style="width:354px" %)The number of expansion modules configured does not match the actual number|(% style="text-align:center; width:153px" %)Continue to run|(% style="width:366px" %)Check whether the configuration is correct.|(% style="text-align:center; width:161px" %)Instruction running
474 +|(% style="text-align:center" %)7110|(% style="width:354px" %)Extension module configuration error|(% style="text-align:center; width:153px" %)Stop running|(% style="width:366px" %)Check that the extension module is configured correctly|(% style="text-align:center; width:161px" %)Instruction running
475 +
476 += **7 Version record** =
477 +
478 +|(% colspan="3" style="text-align:center" %)Current version: REV1.0
479 +|(% style="text-align:center" %)**Version code**|(% style="text-align:center" %)**Modify content**|(% style="text-align:center" %)**Date**
480 +|(% style="text-align:center" %)REV1.0|(% style="text-align:center" %)The first release|(% style="text-align:center" %)22 October 2025
481 +
482 +
1761790435458-276.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
1761790435527-310.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
1761790435581-926.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +500.0 KB
Content
1761790435591-998.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +26.3 KB
Content
1761790435593-675.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +68.8 KB
Content
1761790435595-524.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +56.7 KB
Content
1761790435597-964.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +147.2 KB
Content
1761790435601-438.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +545.2 KB
Content
1761790435610-644.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +93.1 KB
Content
1761790435616-427.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +706.6 KB
Content
1761790435644-648.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +630.2 KB
Content
1761790435655-470.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +678.3 KB
Content
1761790435666-763.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +153.3 KB
Content
1761790581619-130.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +565.4 KB
Content
1761790728530-525.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +47.3 KB
Content
1761790839326-892.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +126.8 KB
Content
1761790846633-145.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +169.4 KB
Content
1761790902574-569.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +581.1 KB
Content
1761791554402-822.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +491.0 KB
Content
1761791932607-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +601.9 KB
Content
1761792561604-505.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +977.1 KB
Content
1761792587489-425.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +977.1 KB
Content
1761792704532-635.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +299.8 KB
Content
1761792792216-675.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +500.0 KB
Content
图片1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.8 MB
Content
图片2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.1 MB
Content
图片3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +3.0 MB
Content
图片4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.8 MB
Content
图片5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.8 MB
Content
图片6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +4.8 MB
Content
图片7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +581.1 KB
Content
图片8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Iris
Size
... ... @@ -1,0 +1,1 @@
1 +491.0 KB
Content