Skip to Content

Changes for page Servo Showing Err. 23?

Last modified by Jiahao Lai on 2026/01/16 10:13
From version 7.1
edited by Jiahao Lai
on 2026/01/16 10:03
Change comment: There is no comment for this version
To version 2.1
edited by Parth Makwana
on 2025/11/25 14:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Jim258
1 +XWiki.ParthMakwana
Content
... ... @@ -7,22 +7,4 @@
7 7  
8 8  
9 9  
10 -**Troubleshooting**
11 -
12 -|=**Reason**|=**Troubleshooting methods**|=**Handling**
13 -|Internal brake resistance wiring error|Check whether C, D are connected to the short cap and the contact is normal|When using an internal braking resistor, reliably connect the shorting cap or shorting wire between C and D
14 -|External braking resistor wiring error|Check whether the external resistor is connected reliably between P+ and C.|When using an external braking resistor, the external resistor is reliably strung between P+ and C
15 -|**Internal braking resistor damaged**|**The servo drive is powered off. Detects whether the resistance between P+ and D is 50Ω**|(((
16 -Contact the technician to replace the internal braking resistor.
17 -
18 -Use an external braking resistor and change the relevant parameters of the P00 "Basic Settings".
19 -)))
20 -
21 -
22 -
23 -== **How Can you measure 50 Ohm resistance between P+ and D terminal? ** ==
24 -
25 -
26 -**Video Link :** [[https:~~/~~/workdrive.zoho.in/file/zotk832e1aa6b63f24c9fb85c4fa2c98b752f>>https://workdrive.zoho.in/file/zotk832e1aa6b63f24c9fb85c4fa2c98b752f]]
27 -
28 28