Wiki source code of Servo Showing Err. 23?
Version 7.1 by Jiahao Lai on 2026/01/16 10:03
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | == **Why the servo is showing Err. 23? ** == | ||
| 2 | |||
| 3 | |||
| 4 | |||
| 5 | (% style="text-align:center" %) | ||
| 6 | [[image:1764050915292-784.png]] | ||
| 7 | |||
| 8 | |||
| 9 | |||
| 10 | **Troubleshooting** | ||
| 11 | |||
| 12 | |=**Reason**|=**Troubleshooting methods**|=**Handling** | ||
| 13 | |Internal brake resistance wiring error|Check whether C, D are connected to the short cap and the contact is normal|When using an internal braking resistor, reliably connect the shorting cap or shorting wire between C and D | ||
| 14 | |External braking resistor wiring error|Check whether the external resistor is connected reliably between P+ and C.|When using an external braking resistor, the external resistor is reliably strung between P+ and C | ||
| 15 | |**Internal braking resistor damaged**|**The servo drive is powered off. Detects whether the resistance between P+ and D is 50Ω**|((( | ||
| 16 | Contact the technician to replace the internal braking resistor. | ||
| 17 | |||
| 18 | Use an external braking resistor and change the relevant parameters of the P00 "Basic Settings". | ||
| 19 | ))) | ||
| 20 | |||
| 21 | |||
| 22 | |||
| 23 | == **How Can you measure 50 Ohm resistance between P+ and D terminal? ** == | ||
| 24 | |||
| 25 | |||
| 26 | **Video Link :** [[https:~~/~~/workdrive.zoho.in/file/zotk832e1aa6b63f24c9fb85c4fa2c98b752f>>https://workdrive.zoho.in/file/zotk832e1aa6b63f24c9fb85c4fa2c98b752f]] | ||
| 27 | |||
| 28 |