1 Communication-WECON PLC
This demo shows how to communicate with WECON PLC.
2 Communicate-CAN
This demo shows how to communicate HMI with CAN device.OPENCAN is developped by WECON company.It is similar with user define protocol.User could define CAN command format.
3 Communicate-Siemens S7-1200
This demo shows how to communicate HMI with S7-1200 PLC.
4 Communication-User Defind Protocol
WECON HMI supports user define protocol.If protocol is complex,we do not suggest user to use this function.It requires advanced engineer to understand the command format.If too complex command,please contact with our salesman.We are possible to develop a new protocol base on market requirement.
5 Communication-MODBUS RTU
This demo shows how to communicate HMI with Modbus RTU device. Note:if HMI is as master,please select "Modbus RTU slave(all function)" protocol.If HMI is as slave,please select "Modbus RTU master" protocol.
6 Communication-MODBUS TCP
This demo shows how to communicate HMI with Modbus RTU device. Note:if HMI is as master,please select "Modbus TCP slave(all function)"protocol. If HMI is as slave,please select "Modbus TCP master" protocol.