Skip to Content

Changes for page 08 Motion Control

Last modified by Iris on 2026/04/03 10:39
From version 7.1
edited by Jiahao Lai
on 2025/11/05 13:54
Change comment: There is no comment for this version
To version 5.2
edited by Iris
on 2025/10/22 15:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Jim258
1 +XWiki.Iris
Content
... ... @@ -2204,10 +2204,6 @@
2204 2204  
2205 2205  
2206 2206  
2207 -
2208 -
2209 -
2210 -
2211 2211  == **Management functions of axis group motion control** ==
2212 2212  
2213 2213  ----
... ... @@ -4907,20 +4907,22 @@
4907 4907  
4908 4908  Features
4909 4909  )))|(((
4910 -The arc path consists of the starting point, auxiliary points, and ending point.
4906 +The arc composed of starting point, auxiliary point and ending point is regarded as the trajectory circle of motion.
4907 +
4908 +
4911 4911  )))|(((
4912 4912  
4913 4913  
4914 -The arc path consists of the starting point, the center point, and theending point.
4912 +The auxiliary point is defined as the center of the motion trajectory, so the auxiliary point should be on the perpendicular line connecting the starting point and the ending point.
4915 4915  
4916 4916  
4917 4917  
4918 4918  )))|(((
4919 -The arc is determined by its starting point, ending point, and the normal vector of the plane containing the circle.
4917 +According to the right-hand grip rule, the ending point and the vector perpendicular to the plane of the circle are defined, and the length of the vector corresponds to the radius of the circle.
4920 4920  
4921 4921  The direction of the vector determines the direction of CW and CCW circles.
4922 4922  
4923 -The vector length is the radius of the arc.
4921 +The major arc and minor arc are determined by path choice.
4924 4924  )))
4925 4925  |(((
4926 4926  
... ... @@ -5194,25 +5194,6 @@
5194 5194  |0x00600011|MC_ERROR_ID_SERVO_PARAWRITE|Write Servo parameter error
5195 5195  |0x00600012|MC_ERROR_ID_LOCAL_PULSE_HOME_TIMEOUT|Time out when origin regression
5196 5196  |0x00600013|MC_ERROR_ID_LOCAL_PULSE_HOME_NOT_TOUCH_LIMI|The execution has not encountered the limit
5197 -|0x00600014|(((
5198 -MC_ERROR_ID_LOCAL_PULSE_HOME_VELOCITY_
5199 -
5200 -OVER_LIMIT
5201 -)))|Pulse shaft HOME Velocity over limit
5202 -|0x00600015|(((
5203 -MC_ERROR_ID_LOCAL_PULSE_HOME_ACC_
5204 -
5205 -OVER_LIMIT
5206 -)))|Pulse shaft HOME Acceleration over limit
5207 -|0x00600020|(((
5208 -MC_ERROR_ID_MODE_SWITCH_NEEDPDO_
5209 -
5210 -NOTMAP
5211 -)))|(((
5212 -There is no required PDO for the mode
5213 -
5214 -corresponding to mode switching.
5215 -)))
5216 5216  |0x006000FF|MC_ERROR_ID_SERVO_LOST|Servo lost
5217 5217  |(% colspan="3" %)**Axis’s error**
5218 5218  |0x00700000|MC_ERROR_ID_AXIS_GENERAL_ERROR|Axis's general error