Skip to Content

Changes for page 03 Project Settings

Last modified by Hunter on 2024/06/11 15:58
From version 1.1
edited by Leo Wei
on 2022/06/08 12:57
Change comment: Imported from XAR
To version 11.11
edited by Stone Wu
on 2022/08/08 10:03
Change comment: (Autosaved)

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -PIStudio.1 User Manual.WebHome
1 +PIStudio.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.admin
1 +XWiki.Stone
Content
... ... @@ -2,34 +2,32 @@
2 2  
3 3  The following steps will show how to change HMI project communication settings.
4 4  
5 -**OperatingProcedure**
5 +**Operating procedure**
6 6  
7 -1. Click "Project"->"Communication" to open setting window.
7 +Click "Project"->"Communication" to open setting window.
8 8  
9 9  (% style="text-align:center" %)
10 -[[image:http://docs.we-con.com.cn/wiki/pistudio/download/Helps/2.Installation%20Software/WebHome/%E9%80%9A%E8%AE%AF%E5%8F%A3%201.gif?rev=1.1||alt="通讯口 1.gif" class="img-thumbnail"]]
10 +[[image:image-20220614172512-1.png]]
11 11  
12 -(% start="2" %)
13 -1. Click "Setting" to open "Communication device" window.
12 +Click "Setting" to open "Communication device" window.
14 14  
15 15  (% style="text-align:center" %)
16 -[[image:http://docs.we-con.com.cn/wiki/pistudio/download/Helps/2.Installation%20Software/WebHome/%E9%80%9A%E8%AE%AF%E5%8F%A3%202.gif?rev=1.1||alt="通讯口 2.gif" class="img-thumbnail"]]
15 +[[image:image-20220614172519-2.png]]
17 17  
18 -(% start="3" %)
19 -1. Select connection way, device protocol.
20 -1. Click "Settings" to change communication parameters, COM is for serial connection, Device IP is for Ethernet connection.
17 +Select connection way, device protocol.
21 21  
19 +Click "Settings" to change communication parameters, COM is for serial connection, Device IP is for Ethernet connection.
20 +
22 22  (% style="text-align:center" %)
23 -[[image:http://docs.we-con.com.cn/wiki/pistudio/download/Helps/2.Installation%20Software/WebHome/%E9%80%9A%E8%AE%AF%E5%8F%A3%203.gif?rev=1.1||alt="通讯口 3.gif" class="img-thumbnail"]]
22 +[[image:image-20220614172524-3.png]]
24 24  
25 -(% start="5" %)
26 -1. Click "OK" to save changes.
24 +Click "OK" to save changes.
27 27  
28 28  **Result**
29 29  
30 30  HMI communication is changed.
31 31  
32 -= **Project Settings** =
30 += **Project settings** =
33 33  
34 34  This place is mainly available for parameters settings, like model selection, storage method or some others parameters.
35 35  
... ... @@ -40,14 +40,14 @@
40 40  The procedure of "Project Settings" as below picture shows.
41 41  
42 42  (% style="text-align:center" %)
43 -[[image:05.Project Settings_html_fc73c5d892676da1.png||class="img-thumbnail" height="252" width="212"]]
41 +[[image:05.Project Settings_html_fc73c5d892676da1.png||height="252" width="212" class="img-thumbnail"]]
44 44  
45 -== **{{id name="_Toc7072"/}}Project Settings** ==
43 +== Project settings ==
46 46  
47 47  (% style="text-align:center" %)
48 48  [[image:工程设置 1.png||class="img-thumbnail"]]
49 49  
50 -== **{{id name="_Toc17881"/}}HMI model** ==
48 +== HMI model ==
51 51  
52 52  "HMI Model" provides the function of modifying the HMI model to help the user switch the project to suit different models. Because different models have different resolution, when user trying to change this option, PIStudio will ask you whether want to generate a backup of older version project if you enable the option project backup.
53 53  
... ... @@ -54,7 +54,7 @@
54 54  (% style="text-align:center" %)
55 55  [[image:05.Project Settings_html_768ecc1e77aaf98.png||height="134" width="538"]]
56 56  
57 -**Operating Procedure**
55 +**Operating procedure**
58 58  
59 59  1. Open "Project Settings" windows.
60 60  1. Select HMI Series.
... ... @@ -62,7 +62,7 @@
62 62  1. Check the box of "Project backup" according to the needful.
63 63  1. Click "OK" to save settings and exit window.
64 64  
65 -== **{{id name="_Toc26701"/}}Enable screensaver** ==
63 +== Enable screensaver ==
66 66  
67 67  Screensaver provides the function is that prevent the HMI from displaying the same screen for a long time due to unattended operation. After a certain interval, the HMI will jump into a screensaver screen.
68 68  
... ... @@ -69,9 +69,10 @@
69 69  (% style="text-align:center" %)
70 70  [[image:05.Project Settings_html_9d248cebcde9d831.png||height="51" width="539"]]
71 71  
72 -1. **Standby Time:** The interval time to enter the screensaver Range 0~~43200 seconds.
73 -1. **Screensave No.:** Set which screen will jump into when screensaver is executed.
70 +**Standby Time:** The interval time to enter the screensaver Range 0~~43200 seconds.
74 74  
72 +**Screensave No.:** Set which screen will jump into when screensaver is executed.
73 +
75 75  **Operating Procedure**
76 76  
77 77  1. Open "Project Settings" windows.
... ... @@ -79,11 +79,14 @@
79 79  1. Modify Standby Time according to your need.
80 80  1. Select screensaver screen in drop-down list, use screen No.1 for example.
81 81  
81 +(% class="box infomessage" %)
82 +(((
82 82  ✎**Note**: When the Screensaver and the Screen Lock are enabled at the same time, the Screensaver can only be unlocked after unlocking the Screen Lock.
84 +)))
83 83  
84 -== **Initial screen** ==
86 +== Initial screen ==
85 85  
86 -The [Initial screen] provides the interface to user to set initial screen. Initial screen means the first one displayed screen when HMI is powered on.
88 +The "Initial screen" provides the interface to user to set initial screen. Initial screen means the first one displayed screen when HMI is powered on.
87 87  
88 88  (% style="text-align:center" %)
89 89  [[image:05.Project Settings_html_562a3a4e9d3ef218.png||height="43" width="259"]]
... ... @@ -94,7 +94,7 @@
94 94  1. Select initial screen in drop-list, use screen 2 as an example.
95 95  1. Click [OK] button to save setting and exit windows.
96 96  
97 -== **{{id name="_Toc29634"/}}{{id name="_Toc479868165"/}}Operation record** ==
99 +== Operation record ==
98 98  
99 99  This setting needs to be used in conjunction with "User Permission" function, which is valid only when "User Permission" function is turned on. The detailed information of "User Permission", "Operation Record" is mainly recording the operation for the current user after user login.
100 100  
... ... @@ -101,7 +101,7 @@
101 101  (% style="text-align:center" %)
102 102  [[image:05.Project Settings_html_ff3f128cf0a734a2.png||height="44" width="272"]]
103 103  
104 -== **{{id name="_Toc13922"/}}Byte order** ==
106 +== Byte order ==
105 105  
106 106  Floating point is one of the commonly used data formats, and it is two-byte order mode. PIStudio provides the interface in "Project Settingss" for setting the byte order.The default mode is Little-endian. This function has no effect on the HSW addresses.
107 107  
... ... @@ -114,11 +114,11 @@
114 114  1. Select "Little-endian" or "Big-endian" mode.
115 115  1. Click "OK" button to save setting and exit window.
116 116  
117 -== **{{id name="_Toc18233"/}}{{id name="_Toc479868167"/}}Switch action** ==
119 +== Switch action ==
118 118  
119 119  **Introduction**
120 120  
121 -The [Switch action] provides the action trigger settings. It is the effect timing of when the button executes the action.
123 +The "Switch action" provides the action trigger settings. It is the effect timing of when the button executes the action.
122 122  
123 123  (% style="text-align:center" %)
124 124  [[image:05.Project Settings_html_59a2f3cd00554dc2.png||height="47" width="272"]]
... ... @@ -132,12 +132,12 @@
132 132  1. Select switch action mode.
133 133  1. Click "OK" button to save setting and exit window.
134 134  
135 -== **{{id name="_Toc479868168"/}}{{id name="_Toc13186"/}}Backlight** ==
137 +== Backlight ==
136 136  
137 137  "Backlight" is for controlling LCD, after designated time of inactivity, HMI LCD will turn OFF automatically, but this setting will be invalid when alarm is ON. The default setting is never turning OFF LCD.
138 138  
139 139  (% style="text-align:center" %)
140 -[[image:05.Project Settings_html_1b41eba67907b744.png||class="img-thumbnail" height="39" width="272"]]
142 +[[image:05.Project Settings_html_1b41eba67907b744.png||height="39" width="272" class="img-thumbnail"]]
141 141  
142 142  **Operating Procedure**
143 143  
... ... @@ -145,7 +145,7 @@
145 145  1. Select duration time.
146 146  1. Click "OK" button to save setting and exit window.
147 147  
148 -== **{{id name="_Toc479868169"/}}{{id name="_Toc22376"/}}{{id name="_Data_Record_Storage"/}}Data record storage** ==
150 +== Data record storage ==
149 149  
150 150  This setting needs to be used in conjunction with [Data Record] function, which is valid only when [Data Record] function is effective. The data record files will be saved in Flash.
151 151  
... ... @@ -158,7 +158,7 @@
158 158  1. Select storage path.
159 159  1. Click "OK" button to save setting and exit window.
160 160  
161 -== **{{id name="_Toc479868173"/}}{{id name="_Toc3744"/}}Designer Password** ==
163 +== Designer Password ==
162 162  
163 163  "Designer Password" provides the encryption functions of the HMI project, including upload and decompile operations. Also it affects the user permissions, installments and other functions.
164 164  
... ... @@ -173,7 +173,7 @@
173 173  1. Enter password
174 174  1. Click "OK" button to save setting and exit windows
175 175  
176 -== **{{id name="_Toc479868172"/}}Use Screen ID Address** ==
178 +== Use screen ID address ==
177 177  
178 178  "Use Screen ID address" provides the function of controlling HMI screens by specific address' value. The address could be set by the user.
179 179  
... ... @@ -195,7 +195,7 @@
195 195  * If HDW0=1, HMI displays Screen No.1.
196 196  * …
197 197  
198 -= **{{id name="_Toc5327"/}}{{id name="_Toc479868175"/}}HMI IP settings** =
200 += HMI IP settings =
199 199  
200 200  This is for setting HMI static IP (HMI also could support DHCP). When enable DHCP mode, the setting is invalid.
201 201  
... ... @@ -204,6 +204,8 @@
204 204  (% style="text-align:center" %)
205 205  [[image:HMI IP 1.png]]
206 206  
209 +(% class="box infomessage" %)
210 +(((
207 207  **✎Note:**
208 208  
209 209  * HMI backstage screen could select Wi-fi or Ethernet mode.
... ... @@ -210,6 +210,7 @@
210 210  * Wi-fi and Ethernet mode only can be switched by manual.
211 211  * IP setting function only can be enabled when HMI is ethernet mode.
212 212  * It is only supported by 8000 series.
217 +)))
213 213  
214 214  **Operating Procedure**
215 215  
... ... @@ -219,9 +219,9 @@
219 219  1. Enter IP.
220 220  1. {{id name="_Toc479868176"/}}{{id name="_Toc8172"/}}Click "OK" button to save setting and exit windows.
221 221  
222 -== **Remote access password** ==
227 +== Remote access password ==
223 223  
224 -[Remote Access Password] is for PI8000/PI9000 series HMI, the password is for remote function, when users use Smart APP on mobile or weconcloud website on PC, which could access HMI screen remotely, the APP or website will require this password.
229 +"Remote Access Password" is for PI8000/PI9000 series HMI, the password is for remote function, when users use Smart APP on mobile or weconcloud website on PC, which could access HMI screen remotely, the APP or website will require this password.
225 225  
226 226  (% style="text-align:center" %)
227 227  [[image:05.Project Settings_html_3edf539b482a57a8.png||height="51" width="412"]]
... ... @@ -233,7 +233,7 @@
233 233  1. Enter password;
234 234  1. Click "OK" button to save setting and exit windows;
235 235  
236 -== **Server of HMI Remote Access** ==
241 +== Server of HMI remote access ==
237 237  
238 238  "Server of HMI remote access" is for PI8000/PI9000 series with -R model HMIs, when users use Smart APP on mobile or weconcloud website on PC, there are two options from selection available for speed up access. Server 1 is for Chinese users, Server 2 is for aboard users.
239 239  
... ... @@ -240,7 +240,7 @@
240 240  (% style="text-align:center" %)
241 241  [[image:05.Project Settings_html_e877533ce894d9f7.png||height="64" width="475"]]
242 242  
243 -= **{{id name="_Toc30218"/}}Installment** =
248 += **Installment** =
244 244  
245 245  "Installment" meets the needs of the designer or equipment manufacturer to provide the trial period to the end customer.
246 246  
... ... @@ -249,19 +249,18 @@
249 249  (% style="text-align:center" %)
250 250  [[image:分期付款 1.png||class="img-thumbnail"]]
251 251  
252 -== **Statis mode** ==
257 +== Static mode ==
253 253  
254 -
255 255  The expiry time and key of each period could not be empty, and they need to be configured in advance. And the expiry time of the latter period need to be later than the expiry of the previous period.
256 256  
257 257  1. **Use admin key: **It can be used for unlock all expirations,in addition to each period key.If users select [use admin key] function,once users enter the admin key when HMI expires,the installment payment function will be disabled.
258 258  1. **Admin: **Password (Key) for [use admin key];
259 -1. **Max periods: **The period of static installment payment range is 0-12.When the maximum number of period is 0,it means that the instilment payment function is disabled;
263 +1. **Max periods: **The period of static installment payment range is 0-12.When the maximum number of period is 0,it means that the instalment payment function is disabled;
260 260  1. **Begin Period: **Set the installment payment to start from the first period, the range is 1-13;
261 261  1. **List: **Configure a list based on [Maximum Periods] and [Begin Period],where user can configure the password and expiration time for each period.
262 262  1. **Use admin key: **It is independent password, and all the expired password can be unlocked by it. If you check it, the installment function would be disabled after you input the admin key. The key can be a combination of "A~~z", "a~~z" and "0~~9"(case-sensitive).
263 263  
264 -== **Dynamic mode** ==
268 +== Dynamic mode ==
265 265  
266 266  To enable the function of the installment payment, you must set up the following parameters
267 267  
... ... @@ -300,6 +300,8 @@
300 300  1. **Clear Bit: **Clear bit when user enters the right installment password.
301 301  1. **Upcoming Alert:** HMI show the installment alert before expire date (before 1,3 or 5 days)
302 302  
307 +(% class="box infomessage" %)
308 +(((
303 303  **✎Note:**
304 304  
305 305  1. The screen of setting intallment and enter password is the built-in sub-screen, and couldn't bue modified.
... ... @@ -309,19 +309,19 @@
309 309  1. The password cannot exceed 6 characters. The password can be composed of three modes: numbers, letters, and Chinese characters. Chinese characters contain only three characters and letters are case sensitive. The three key modes can be mixed.
310 310  1. Each key corresponds to a admin key. After entering the admin key in the installment password interface pop up by HMI, the installment function will be turned off, that is, the installment password interface will no longer pop up. So you should not use the admin key at will, or open up the admin key to others.
311 311  1. In the dynamic mode of installment payments, select "Enable valid period for password", then the "valid days" must be the same day as the current time of HMI.  If the time is not the same day, then the generated password is invalid.
318 +)))
312 312  
313 -(% class="wikigeneratedid" %)
314 -== **Password tool** ==
320 +== Password tool ==
315 315  
316 316  (% class="wikigeneratedid" id="HPasswordtool" %)
317 -For the detail, please click [["Password tool">>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/14.Tools/#HPasswordtool]].
323 +For the detail, please click [["Password tool">>https://docs.we-con.com.cn/bin/view/PIStudio/14.Tools/#HPasswordtool]].
318 318  
319 -= **{{id name="_Toc734"/}}Extend** =
325 += **Extend** =
320 320  
321 321  (% style="text-align:center" %)
322 322  [[image:扩展 1.png||class="img-thumbnail"]]
323 323  
324 -== **{{id name="_Toc31631"/}}Into Setup** ==
330 +== Into setup ==
325 325  
326 326  It provides entrance ways of the backstage interface.
327 327  
... ... @@ -328,17 +328,13 @@
328 328  (% style="text-align:center" %)
329 329  [[image:05.Project Settings_html_53acbd1d326cab4f.png||height="126" width="471"]]
330 330  
331 -1. **Startup: **it means after the HMI starts and displays the LOGO, press and holding the upper-right corner within the set time is able to enter the background interface. If the time is exceeded the setting time, the long press would be invalid.
337 +* **Startup: **it means after the HMI starts and displays the LOGO, press and holding the upper-right corner within the set time is able to enter the background interface. If the time is exceeded the setting time, the long press would be invalid.
338 +** For example, the Time is 5 seconds, then within 5 seconds after the LOGO is displayed, long press the upper-right corner can normally enter the screen. But if more than 5 seconds, long press will not be able to access.
339 +* **Running: **it means when HMI running the project, press and holding the upper-right corner over certain time, it would enter the backstage interface.
340 +** For example, the Time is 5 seconds, then long press the upper-right corner lasting over 5 seconds, it would able to access.
332 332  
333 -* For example, the Time is 5 seconds, then within 5 seconds after the LOGO is displayed, long press the upper-right corner can normally enter the screen. But if more than 5 seconds, long press will not be able to access.
342 +**Operating procedure**
334 334  
335 -(% start="2" %)
336 -1. **Running: **it means when HMI running the project, press and holding the upper-right corner over certain time, it would enter the backstage interface.
337 -
338 -* For example, the Time is 5 seconds, then long press the upper-right corner lasting over 5 seconds, it would able to access.
339 -
340 -**Operating Procedure**
341 -
342 342  1. Open "Project Settings" windows.
343 343  1. Open "Extend" sub-windows.
344 344  1. Select "Startup" or [Running.
... ... @@ -345,14 +345,14 @@
345 345  1. Set "Time".
346 346  1. Set "Password" if you require the password when entering the backstage interface.
347 347  
348 -== **{{id name="_Toc3554"/}}Special Expansion** ==
350 +== Special expansion ==
349 349  
350 -[Special Expansion] is for extending audio play and camera input functions for special HMI models.
352 +"Special Expansion" is for extending audio play and camera input functions for special HMI models.
351 351  
352 352  (% style="text-align:center" %)
353 353  [[image:05.Project Settings_html_784d40de9b3e3bda.png||height="109" width="543"]]
354 354  
355 -**Operating Procedure**
357 +**Operating procedure**
356 356  
357 357  1. Open "Project Settings" windows.
358 358  1. Open "Extend" sub-windows.
... ... @@ -364,9 +364,9 @@
364 364  {{id name="_Toc5094"/}}
365 365  
366 366  (% style="text-align:center" %)
367 -[[image:05.Project Settings_html_baff180660df10b7.png||class="img-thumbnail" height="43" width="388"]]
369 +[[image:05.Project Settings_html_baff180660df10b7.png||height="43" width="388" class="img-thumbnail"]]
368 368  
369 -**Operating Procedure of Multi-link**
371 +**Operating procedure of Multi-link**
370 370  
371 371  1. Open "Project Settings" windows.
372 372  1. Open "Extend" sub-windows.
... ... @@ -378,14 +378,17 @@
378 378  
379 379  One HMI can display in multiple screens, through Master-Slave connection.
380 380  
383 +(% class="box infomessage" %)
384 +(((
381 381  ✎**Note:**
382 382  
383 383  * These all three functions are not available for all HMIs, only special HMI models could support them.
384 -* The details of "audio" settings, please refer to [[Audio>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/11.Advanced%20Function/#HAudio]].
385 -* The details of ""camera" settings, please refer to [[camera>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/11.Advanced%20Function/#HAudio]].
386 -* The details of ""mulit-link" settings, please refer to [[mulit-link>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/11.Advanced%20Function/#HAudio]].
388 +* The details of "audio" settings, please refer to [[Audio>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HAudio]].
389 +* The details of ""camera" settings, please refer to [[camera>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HrtspwebA0camera]].
390 +* The details of ""mulit-link" settings, please refer to [[mulit-link>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HMulit-link]].
391 +)))
387 387  
388 -== **Input Device** ==
393 +== Input device ==
389 389  
390 390  It is used for enable input devices, like keyboard and mouse.
391 391  
... ... @@ -403,7 +403,7 @@
403 403  
404 404  The arrow will be display in screen when HMI is running, and keyboard could be used to enter code and control arrow.
405 405  
406 -== **Lab** ==
411 +== Lab ==
407 407  
408 408  Lab is used for enable experimental function.
409 409  
... ... @@ -414,7 +414,7 @@
414 414  1. **Xml Optimization**: Improve xml operation efficiency and speed up screen compilation.
415 415  1. **Enable Lua Debugging**: Control the Lua debugging window whether opened or not when using the Lua script.
416 416  
417 -== **Vector** ==
422 +== Vector ==
418 418  
419 419  It is the function deal with the display issue.
420 420  
... ... @@ -431,8 +431,57 @@
431 431  1. Check "Vector Font" or "Vector Image".
432 432  1. Click "OK" to save and exist.
433 433  
434 -= **{{id name="_Toc29782"/}}Security** =
439 +== Udisk pop-up ==
435 435  
441 +(% style="text-align:center" %)
442 +[[image:image-20220808091210-1.jpeg]]
443 +
444 +There are two methods to enable Udisk pop-up function.
445 +
446 +* Click "Project setting" → "Udick pop-up", the built-in screen 5004 would pop up after inserting the Udisk.
447 +* Udisk pop-up flag file: Create a blank text file in the root directory of the U disk, named "download.dat", and the screen could pop up after inserting the U disk.
448 +
449 +(% class="box infomessage" %)
450 +(((
451 +**✎Note:** The Udick pop-up function is only supported by the formware of  PIStudio V8.2.29_D20220302 and above. For the version of PIStudio, please refer to "About".
452 +)))
453 +
454 +**Udisk pop-up interface**
455 +
456 +The interface of the Udisk pop-up is 5004 built-in screen. If the pop-up interface is not operated within 10s of the pop-up, it will be closed automatically.
457 +
458 +(% style="text-align:center" %)
459 +[[image:image-20220808093055-3.jpeg||height="212" width="307"]]
460 +
461 +1. **Project: **Enter the download project interface.
462 +1. **Firmware: **Enter the download project interface.
463 +1. **Backstage: **Enter the backstage directly.
464 +1. **Exit: **Close the pop up screen.
465 +
466 +== FTP server ==
467 +
468 +(% style="text-align:center" %)
469 +[[image:image-20220808093816-5.png]]
470 +
471 +**Enable method: **"Project parameter" → "Extend" → check "FTP service".
472 +
473 +**Usage:**
474 +
475 +* Enter "ftp:~/~/ + the IP address of the HMI" in the folder address bar.
476 +
477 +[[image:image-20220808094729-7.png]]
478 +
479 +* You can also enter “ftp:~/~/ftpuser:000000@192.168.39.242” to access the interface directly (with a username and password).
480 +
481 +[[image:image-20220808100330-10.jpeg]]
482 +
483 +If the ftp service is enabled, it will prompt for a username and password, and if not, it will prompt that the connection to the server cannot be established.
484 +
485 +(% style="text-align:center" %)
486 +[[image:image-20220808100223-9.jpeg]]
487 +
488 += **Security** =
489 +
436 436  Security means objects and screen security, but this function is only available in 3000i series and HMI+ series or above.
437 437  
438 438  Only when object password is set,object password function could be used in object.
... ... @@ -440,7 +440,7 @@
440 440  (% style="text-align:center" %)
441 441  [[image:安全设置 1.png||class="img-thumbnail"]]
442 442  
443 -== **{{id name="_Toc16190"/}}Objects password** ==
497 +== Objects password ==
444 444  
445 445  You should enter password to access the protected object. This could avoid some misoperation on object. There are 12 levels in object password setting, and each level corresponds to each password.
446 446  
... ... @@ -447,7 +447,7 @@
447 447  (% style="text-align:center" %)
448 448  [[image:05.Project Settings_html_4835fff86888a26b.png||height="238" width="502"]]
449 449  
450 -**(1) Enable object password: **Check it to enable object security function. There are 12 levels corresponding to different passwords. The password of levels are set by the highest level.
504 +**Enable object password: **Check it to enable object security function. There are 12 levels corresponding to different passwords. The password of levels are set by the highest level.
451 451  
452 452  1. **Passwords for levels:** It is used for set password for every level, it is composed of numbers and letters (case sensitive)within 8 digits.
453 453  1. **Start level:** It is used for set initial level while this function is enabled.
... ... @@ -467,7 +467,7 @@
467 467  * The configured password could not be empty, otherwise when users close the configuration screen ,there will be an error: "please set password for level".
468 468  * If configured object password level is higher than highest password setting in Project Settingss, there will be an error note during compiling: "the security level of this object is out of range!" .Users need to set password level again to solve the problem.
469 469  
470 -== **{{id name="_Toc3790"/}}Screen Lock** ==
524 +== Screen Lock ==
471 471  
472 472  The screen lock function provides another way for the security of HMI operation. When clients do not perform any operation for a set period of time, the HMI screen would be locked, and the password is required when HMI is operated again.
473 473  
... ... @@ -478,24 +478,24 @@
478 478  1. **Password:** this password is used for unlocking screen, it is composed of numbers and letters (case sensitive) within 8 digits.
479 479  1. **Lock time:** It is used for setting time how long the screen will be locked if users do not operate, range: 1 to 240 minutes (integer).
480 480  
481 -= **Font pack** =
535 += Font pack =
482 482  
483 483  "Font pack" is for setting built-in font for HMI project, in this way, the text in some objects of the HMI could be displayed in the desired font.
484 484  
485 485  **Operating Procedure**
486 486  
487 -1. Click the button [[image:http://docs.we-con.com.cn/wiki/pistudio/download/Helps/14.Tools/WebHome/14.5-1.png?rev=1.1||alt="14.5-1.png"]] to open setting window.
541 +1. Click the button to open setting window.
488 488  1. Check "Change Built-in font".
489 489  1. If all the 8 languages use the same font, please click "Set all" to open setting window as below show.
490 490  
491 491  (% style="text-align:center" %)
492 -[[image:http://docs.we-con.com.cn/wiki/pistudio/download/Helps/14.Tools/WebHome/14.Tools_html_84212db1d994088d.png?width=401&height=404&rev=1.1||alt="14.Tools_html_84212db1d994088d.png" class="img-thumbnail" height="404" width="401"]]
546 +[[image:image-20220614173003-1.png]]
493 493  
494 494  (% start="4" %)
495 495  1. Select font as picture shows.
496 496  
497 497  (% style="text-align:center" %)
498 -[[image:http://docs.we-con.com.cn/wiki/pistudio/download/Helps/14.Tools/WebHome/14.Tools_html_c2a1ef70d2e5900e.png?width=576&height=437&rev=1.1||alt="14.Tools_html_c2a1ef70d2e5900e.png" height="437" width="576"]]
552 +[[image:image-20220614173008-2.png]]
499 499  
500 500  (% start="5" %)
501 501  1. Click [OK] to save settings.
... ... @@ -507,6 +507,6 @@
507 507  * The built-in font of language 3 will be Bodoni MT.
508 508  * The built-in font of language 4 will be Comic sans MS.
509 509  * The built-in font of language 5 will be Centaur.
510 -* The built-in font of language 6 will be Siemens slab.
564 +* The built-in font of language 6 will be SimHei.
511 511  * The built-in font of language 7 will be Times New Roman.
512 512  * The built-in font of language 8 will be Bauhaus 93.
image-20220614172512-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +31.0 KB
Content
image-20220614172519-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +21.7 KB
Content
image-20220614172524-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +15.0 KB
Content
image-20220614173003-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +35.1 KB
Content
image-20220614173008-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +36.5 KB
Content
image-20220808091210-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +41.7 KB
Content
image-20220808092928-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +759.0 KB
Content
image-20220808093055-3.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +743.9 KB
Content
image-20220808093713-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +9.9 KB
Content
image-20220808093816-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
image-20220808094244-6.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
image-20220808094729-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +40.2 KB
Content
image-20220808095752-8.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +35.7 KB
Content
image-20220808100223-9.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +26.8 KB
Content
image-20220808100330-10.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +56.1 KB
Content