Skip to Content

Changes for page 03 Project Settings

Last modified by Hunter on 2024/06/11 15:58
From version 11.5
edited by Stone Wu
on 2022/08/08 09:33
Change comment: (Autosaved)
To version 28.1
edited by Jim
on 2023/08/11 09:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Stone
1 +XWiki.Jim
Content
... ... @@ -4,7 +4,7 @@
4 4  
5 5  **Operating procedure**
6 6  
7 -Click "Project"->"Communication" to open setting window.
7 +Click "Project"→"Communication" to open setting window.
8 8  
9 9  (% style="text-align:center" %)
10 10  [[image:image-20220614172512-1.png]]
... ... @@ -43,7 +43,7 @@
43 43  == Project settings ==
44 44  
45 45  (% style="text-align:center" %)
46 -[[image:工程设置 1.png||class="img-thumbnail"]]
46 +[[image:ProjectSettingOverview.png]]
47 47  
48 48  == HMI model ==
49 49  
... ... @@ -83,6 +83,19 @@
83 83  ✎**Note**: When the Screensaver and the Screen Lock are enabled at the same time, the Screensaver can only be unlocked after unlocking the Screen Lock.
84 84  )))
85 85  
86 +== Enable Dynamic Screensaver ==
87 +
88 +Same as Screensaver. Dynamic Screensaver provides the function is that prevent the HMI from displaying the same screen for a long time due to unattended operation. But Dynamic will be able to display animation.
89 +
90 +(% style="text-align:center" %)
91 +[[image:DynamicScreensaver.png]]
92 +
93 +**Enable dynamic screensaver:** If the screen is not operated within the set waiting time, it will automatically enter the set animation effect, and operating the screen again will exit the dynamic screensaver.
94 +
95 +**Standby Time(minutes): **When the screen is not operated, the waiting interval to enter the dynamic screensaver, ranges 1~~720.
96 +
97 +**Animation Type:** Types of effects currently provided are Raster, Blinds, and Bubble.
98 +
86 86  == Initial screen ==
87 87  
88 88  The "Initial screen" provides the interface to user to set initial screen. Initial screen means the first one displayed screen when HMI is powered on.
... ... @@ -92,9 +92,9 @@
92 92  
93 93  **Operating Procedure**
94 94  
95 -1. Open [Project Settings] windows.
108 +1. Open "Project Settings" windows.
96 96  1. Select initial screen in drop-list, use screen 2 as an example.
97 -1. Click [OK] button to save setting and exit windows.
110 +1. Click "OK" button to save setting and exit windows.
98 98  
99 99  == Operation record ==
100 100  
... ... @@ -118,8 +118,6 @@
118 118  
119 119  == Switch action ==
120 120  
121 -**Introduction**
122 -
123 123  The "Switch action" provides the action trigger settings. It is the effect timing of when the button executes the action.
124 124  
125 125  (% style="text-align:center" %)
... ... @@ -222,7 +222,7 @@
222 222  1. Open "HMI IP" sub-window.
223 223  1. Check "HMI IP".
224 224  1. Enter IP.
225 -1. {{id name="_Toc479868176"/}}{{id name="_Toc8172"/}}Click "OK" button to save setting and exit windows.
236 +1. Click "OK" button to save setting and exit windows.
226 226  
227 227  == Remote access password ==
228 228  
... ... @@ -234,7 +234,7 @@
234 234  **Operating Procedure**
235 235  
236 236  1. Open "Project Settings" windows;
237 -1. Open "HMI IP] sub-windows;
248 +1. Open "HMI IP" sub-windows;
238 238  1. Enter password;
239 239  1. Click "OK" button to save setting and exit windows;
240 240  
... ... @@ -259,7 +259,7 @@
259 259  The expiry time and key of each period could not be empty, and they need to be configured in advance. And the expiry time of the latter period need to be later than the expiry of the previous period.
260 260  
261 261  1. **Use admin key: **It can be used for unlock all expirations,in addition to each period key.If users select [use admin key] function,once users enter the admin key when HMI expires,the installment payment function will be disabled.
262 -1. **Admin: **Password (Key) for [use admin key];
273 +1. **Admin: **Password (Key) for "use admin key";
263 263  1. **Max periods: **The period of static installment payment range is 0-12.When the maximum number of period is 0,it means that the instalment payment function is disabled;
264 264  1. **Begin Period: **Set the installment payment to start from the first period, the range is 1-13;
265 265  1. **List: **Configure a list based on [Maximum Periods] and [Begin Period],where user can configure the password and expiration time for each period.
... ... @@ -343,13 +343,13 @@
343 343  
344 344  1. Open "Project Settings" windows.
345 345  1. Open "Extend" sub-windows.
346 -1. Select "Startup" or [Running.
357 +1. Select "Startup" or "Running".
347 347  1. Set "Time".
348 348  1. Set "Password" if you require the password when entering the backstage interface.
349 349  
350 350  == Special expansion ==
351 351  
352 -"Special Expansion" is for extending audio play and camera input functions for special HMI models.
363 +"Special expansion" is for extending audio play and camera input functions for special HMI models.
353 353  
354 354  (% style="text-align:center" %)
355 355  [[image:05.Project Settings_html_784d40de9b3e3bda.png||height="109" width="543"]]
... ... @@ -386,8 +386,8 @@
386 386  
387 387  * These all three functions are not available for all HMIs, only special HMI models could support them.
388 388  * The details of "audio" settings, please refer to [[Audio>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HAudio]].
389 -* The details of ""camera" settings, please refer to [[camera>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HrtspwebA0camera]].
390 -* The details of ""mulit-link" settings, please refer to [[mulit-link>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HMulit-link]].
400 +* The details of "camera" settings, please refer to [[camera>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HrtspwebA0camera]].
401 +* The details of "mulit-link" settings, please refer to [[mulit-link>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HMulit-link]].
391 391  )))
392 392  
393 393  == Input device ==
... ... @@ -438,6 +438,7 @@
438 438  
439 439  == Udisk pop-up ==
440 440  
452 +(% style="text-align:center" %)
441 441  [[image:image-20220808091210-1.jpeg]]
442 442  
443 443  There are two methods to enable Udisk pop-up function.
... ... @@ -447,7 +447,7 @@
447 447  
448 448  (% class="box infomessage" %)
449 449  (((
450 -**✎Note:** The Udick pop-up function is only supported by image of  PIStudio V8.2.29_D20220302 and above. For the version of PIStudio, please refer to "About".
462 +**✎Note:** The Udick pop-up function is only supported by the formware of  PIStudio V8.2.29_D20220302 and above. For the version of PIStudio, please refer to "About".
451 451  )))
452 452  
453 453  **Udisk pop-up interface**
... ... @@ -454,12 +454,71 @@
454 454  
455 455  The interface of the Udisk pop-up is 5004 built-in screen. If the pop-up interface is not operated within 10s of the pop-up, it will be closed automatically.
456 456  
469 +(% style="text-align:center" %)
457 457  [[image:image-20220808093055-3.jpeg||height="212" width="307"]]
458 458  
459 -1. D
472 +1. **Project: **Enter the download project interface.
473 +1. **Firmware: **Enter the download project interface.
474 +1. **Backstage: **Enter the backstage directly.
475 +1. **Exit: **Close the pop up screen.
460 460  
461 -ftp server
477 +== FTP server ==
462 462  
479 +(% style="text-align:center" %)
480 +[[image:image-20220808093816-5.png||class="img-thumbnail"]]
481 +
482 +**Enable method: **"Project parameter" → "Extend" → check "FTP service".
483 +
484 +**Usage:**
485 +
486 +* Enter "ftp:~/~/ + the IP address of the HMI" in the folder address bar.
487 +
488 +(% style="text-align:center" %)
489 +[[image:image-20220808094729-7.png||height="429" width="909" class="img-thumbnail"]]
490 +
491 +* You can also enter “ftp:~/~/ftpuser:000000@192.168.39.242” to access the interface directly (with a username and password).
492 +
493 +(% style="text-align:center" %)
494 +[[image:image-20220808100330-10.jpeg||class="img-thumbnail"]]
495 +
496 +* If the ftp service is enabled, it will prompt for a username and password, and if not, it will prompt that the connection to the server cannot be established.
497 +
498 +(% style="text-align:center" %)
499 +[[image:image-20220808100223-9.jpeg]]
500 +
501 +* Enter the username and password as configured in the project.
502 +
503 +(% style="text-align:center" %)
504 +[[image:image-20220808100720-11.jpeg||class="img-thumbnail"]]
505 +
506 +**Description of folder and permission**
507 +
508 +* AlarmFile is alarm record. It can only download files, but cannot upload files.
509 +* DataLogFile is data log record. It can only download files, but cannot upload files.
510 +* RecipeFile is recipe. It can only download files, but cannot upload files.
511 +* UserMgrFile is operation record. It can only download files, but cannot upload files.
512 +* Sdcard is the mounting directory of SD card. There will be the subdirectory of S1, S2, S3, etc. when connected SD card. It can upload and download.
513 +* Udisk is the mounting directory of USB flash drive. There will be the subdirectory of U1, U2, U3, etc. when connected USB flash drive. It can upload and download.
514 +
515 +(% class="box infomessage" %)
516 +(((
517 +**✎Note:** For Udisk and SD card, it is recommended to use NTFS format.
518 +)))
519 +
520 +Maximum number of connections: up to 5 clients can be supported to access the interface at the same time.
521 +
522 +Password modification: Use the changePsd function in the lua function ftpserver library to modify password.
523 +
524 +* Prototype: ftpserver.changePsd(oldPsd,newPsd)
525 +* Function: change the login password of ftpserver
526 +* Parameters:
527 +** oldPsd(string) old password
528 +** newPsd(string) new password.
529 +* Format: only letters, numbers and underscores are allowed, and the length must be 6 to 8 digits.
530 +* Returns.
531 +** Success: true
532 +** Failure: nil,err
533 +
463 463  = **Security** =
464 464  
465 465  Security means objects and screen security, but this function is only available in 3000i series and HMI+ series or above.
... ... @@ -467,34 +467,32 @@
467 467  Only when object password is set,object password function could be used in object.
468 468  
469 469  (% style="text-align:center" %)
470 -[[image:安全设置 1.png||class="img-thumbnail"]]
541 +[[image:SecurityOverview.png]]
471 471  
472 472  == Objects password ==
473 473  
474 -You should enter password to access the protected object. This could avoid some misoperation on object. There are 12 levels in object password setting, and each level corresponds to each password.
545 +Users should enter password to access the protected object. This could avoid some misoperation on object. There are 12 levels in object password setting, and each level corresponds to each password.
475 475  
476 476  (% style="text-align:center" %)
477 477  [[image:05.Project Settings_html_4835fff86888a26b.png||height="238" width="502"]]
478 478  
479 -**Enable object password: **Check it to enable object security function. There are 12 levels corresponding to different passwords. The password of levels are set by the highest level.
550 +**Enable object password: **Check it to enable object security function. There are 12 levels corresponding to different passwords. The password of levels is set by the highest level.
480 480  
481 -1. **Passwords for levels:** It is used for set password for every level, it is composed of numbers and letters (case sensitive)within 8 digits.
482 -1. **Start level:** It is used for set initial level while this function is enabled.
483 -1. **Highest level**: It is used for set how many levels of password could be used.
484 -1. **Independent password:**
552 +* **Passwords for levels:** It is used to set password for every level, it is composed of numbers and letters (case sensitive)within 8 digits.
553 +* **Start level:** It is used to set initial level while this function is enabled.
554 +* **Highest level**: It is used to set how many levels of password could be used.
555 +* **Independent password:**
556 +** **Unchecked: **You should enter the corresponding level password when unlocking each level of object, and the higher level password could unlock the lower level object.
557 +** **Checked:** You could only type the corresponding level password when unlocking each level of object.
485 485  
486 -* **Unchecked: **You should enter the corresponding level password when unlocking each level of object, and the higher level password could unlock the lower level object.
487 -* **Checked:** You could only type the corresponding level password when unlocking each level of object.
559 +(% class="box infomessage" %)
560 +✎**Note: **Object level password could be enabled in "Bit Switch", "Word Switch", "Function Switch", combination "Switch", "Numeric Input", "Character Input", "Drop-down List" etc.
488 488  
489 -✎**Note:**
490 -
491 -* Object level password could be enabled in "Bit Switch", "Word Switch", "Function Switch", vCombination Switch", "Numeric Input", "Character Input", "Drop-down List" etc.
492 -
493 493  (% style="text-align:center" %)
494 494  [[image:安全设置 2.png||class="img-thumbnail"]]
495 495  
496 -* The configured password could not be empty, otherwise when users close the configuration screen ,there will be an error: "please set password for level".
497 -* If configured object password level is higher than highest password setting in Project Settingss, there will be an error note during compiling: "the security level of this object is out of range!" .Users need to set password level again to solve the problem.
565 +* The configured password could not be empty, otherwise, when users close the configuration screen, there will be an error: "Please set password for level".
566 +* If configured object password level is higher than highest password setting in Project Settingss, there will be an error note during compiling: "The security level of this object is out of range!" . Users need to set password level again to solve the problem.
498 498  
499 499  == Screen Lock ==
500 500  
... ... @@ -507,6 +507,47 @@
507 507  1. **Password:** this password is used for unlocking screen, it is composed of numbers and letters (case sensitive) within 8 digits.
508 508  1. **Lock time:** It is used for setting time how long the screen will be locked if users do not operate, range: 1 to 240 minutes (integer).
509 509  
579 +== LAN Monitoring Security ==
580 +
581 +(% style="text-align:center" %)
582 +[[image:SecurityOption.png]]
583 +
584 +In the same Local Area Network, user can enter the IP of the HMI on the webpage to achieve LAN monitoring of the HMI
585 +
586 +The terminal access number of remote monitoring or LAN monitoring for each series of HMI models is limited, as following table shows:
587 +
588 +|=(% scope="row" style="width: 182px;" %)Model|=(% style="width: 178px;" %)System Version|=(% style="width: 153px;" %)LAN Monitoring|=(% style="width: 260px;" %)Remote Monitoring|=(% style="width: 241px;" %)Supported visits number
589 +|=(% style="width: 182px;" %)3000|(% style="width:178px" %)HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)×|(% style="width:241px" %)1
590 +|=(% style="width: 182px;" %)3000i|(% style="width:178px" %)HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)×|(% style="width:241px" %)1
591 +|=(% style="width: 182px;" %)3000ie|(% style="width:178px" %)HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)×|(% style="width:241px" %)1
592 +|=(% style="width: 182px;" %)3000ig-O|(% style="width:178px" %)HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)×|(% style="width:241px" %)1
593 +|=(% style="width: 182px;" %)3000ig/3000ig-C|(% style="width:178px" %)HMI V1.0/HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)✔|(% style="width:241px" %)4
594 +|=(% style="width: 182px;" %)8000|(% style="width:178px" %)HMI V1.0/HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)✔|(% style="width:241px" %)4
595 +|=(% style="width: 182px;" %)8000ig|(% style="width:178px" %)HMI V1.0/HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)✔|(% style="width:241px" %)4
596 +|=(% style="width: 182px;" %)9000|(% style="width:178px" %)HMI V1.0/HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)✔|(% style="width:241px" %)4
597 +
598 +After this function is enabled, user name and password need to be entered for LAN monitoring, which can avoid some uncontrollable security problems to a certain extent;
599 +
600 +{{info}}
601 +✎Note: This LAN Monitoring Security function is only supported by HMI V2.0 system and above.
602 +{{/info}}
603 +
604 +**Webpage monitoring**:
605 +
606 +After enable this function, when user input IP to access HMI, you need to enter the user name and password configured by HMI in the login interface first, and then you can access after verification(The login interface supports switching language between Chinese and English, the default is Chinese)
607 +
608 +(% style="text-align:center" %)
609 +[[image:LANSercuityloginpage.png]]
610 +
611 +If it is not configured this function in the project, it also can modify from the background interface.
612 +
613 +System->Extend
614 +
615 +(% style="text-align:center" %)
616 +[[image:LANBackground.png]]
617 +
618 +
619 +
510 510  = Font pack =
511 511  
512 512  "Font pack" is for setting built-in font for HMI project, in this way, the text in some objects of the HMI could be displayed in the desired font.
... ... @@ -527,7 +527,7 @@
527 527  [[image:image-20220614173008-2.png]]
528 528  
529 529  (% start="5" %)
530 -1. Click [OK] to save settings.
640 +1. Click “OK” to save settings.
531 531  
532 532  **Result**
533 533  
DynamicScreensaver.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +2.7 KB
Content
LANBackground.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +652.7 KB
Content
LANSercuityloginpage.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +68.1 KB
Content
ProjectSettingOverview.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +26.1 KB
Content
SecurityOption.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
SecurityOverview.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Hunter
Size
... ... @@ -1,0 +1,1 @@
1 +20.0 KB
Content
image-20220808093713-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +9.9 KB
Content
image-20220808093816-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 KB
Content
image-20220808094244-6.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +39.3 KB
Content
image-20220808094729-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +40.2 KB
Content
image-20220808095752-8.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +35.7 KB
Content
image-20220808100223-9.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +26.8 KB
Content
image-20220808100330-10.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +56.1 KB
Content
image-20220808100720-11.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Stone
Size
... ... @@ -1,0 +1,1 @@
1 +37.8 KB
Content