Skip to Content

Changes for page 03 Project Settings

Last modified by Hunter on 2024/06/11 15:58
From version 31.1
edited by Mora Zhou
on 2023/09/09 14:33
Change comment: There is no comment for this version
To version 11.14
edited by Stone Wu
on 2022/08/08 10:18
Change comment: (Autosaved)

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Mora
1 +XWiki.Stone
Content
... ... @@ -4,7 +4,7 @@
4 4  
5 5  **Operating procedure**
6 6  
7 -Click "Project"→"Communication" to open setting window.
7 +Click "Project"->"Communication" to open setting window.
8 8  
9 9  (% style="text-align:center" %)
10 10  [[image:image-20220614172512-1.png]]
... ... @@ -43,7 +43,7 @@
43 43  == Project settings ==
44 44  
45 45  (% style="text-align:center" %)
46 -[[image:ProjectSettingOverview.png]]
46 +[[image:工程设置 1.png||class="img-thumbnail"]]
47 47  
48 48  == HMI model ==
49 49  
... ... @@ -83,19 +83,6 @@
83 83  ✎**Note**: When the Screensaver and the Screen Lock are enabled at the same time, the Screensaver can only be unlocked after unlocking the Screen Lock.
84 84  )))
85 85  
86 -== Enable Dynamic Screensaver ==
87 -
88 -Same as Screensaver. Dynamic Screensaver provides the function is that prevent the HMI from displaying the same screen for a long time due to unattended operation. But Dynamic will be able to display animation.
89 -
90 -(% style="text-align:center" %)
91 -[[image:DynamicScreensaver.png]]
92 -
93 -**Enable dynamic screensaver:** If the screen is not operated within the set waiting time, it will automatically enter the set animation effect, and operating the screen again will exit the dynamic screensaver.
94 -
95 -**Standby Time(minutes): **When the screen is not operated, the waiting interval to enter the dynamic screensaver, ranges 1~~720.
96 -
97 -**Animation Type:** Types of effects currently provided are Raster, Blinds, and Bubble.
98 -
99 99  == Initial screen ==
100 100  
101 101  The "Initial screen" provides the interface to user to set initial screen. Initial screen means the first one displayed screen when HMI is powered on.
... ... @@ -105,9 +105,9 @@
105 105  
106 106  **Operating Procedure**
107 107  
108 -1. Open "Project Settings" windows.
95 +1. Open [Project Settings] windows.
109 109  1. Select initial screen in drop-list, use screen 2 as an example.
110 -1. Click "OK" button to save setting and exit windows.
97 +1. Click [OK] button to save setting and exit windows.
111 111  
112 112  == Operation record ==
113 113  
... ... @@ -131,6 +131,8 @@
131 131  
132 132  == Switch action ==
133 133  
121 +**Introduction**
122 +
134 134  The "Switch action" provides the action trigger settings. It is the effect timing of when the button executes the action.
135 135  
136 136  (% style="text-align:center" %)
... ... @@ -233,7 +233,7 @@
233 233  1. Open "HMI IP" sub-window.
234 234  1. Check "HMI IP".
235 235  1. Enter IP.
236 -1. Click "OK" button to save setting and exit windows.
225 +1. {{id name="_Toc479868176"/}}{{id name="_Toc8172"/}}Click "OK" button to save setting and exit windows.
237 237  
238 238  == Remote access password ==
239 239  
... ... @@ -245,7 +245,7 @@
245 245  **Operating Procedure**
246 246  
247 247  1. Open "Project Settings" windows;
248 -1. Open "HMI IP" sub-windows;
237 +1. Open "HMI IP] sub-windows;
249 249  1. Enter password;
250 250  1. Click "OK" button to save setting and exit windows;
251 251  
... ... @@ -270,7 +270,7 @@
270 270  The expiry time and key of each period could not be empty, and they need to be configured in advance. And the expiry time of the latter period need to be later than the expiry of the previous period.
271 271  
272 272  1. **Use admin key: **It can be used for unlock all expirations,in addition to each period key.If users select [use admin key] function,once users enter the admin key when HMI expires,the installment payment function will be disabled.
273 -1. **Admin: **Password (Key) for "use admin key";
262 +1. **Admin: **Password (Key) for [use admin key];
274 274  1. **Max periods: **The period of static installment payment range is 0-12.When the maximum number of period is 0,it means that the instalment payment function is disabled;
275 275  1. **Begin Period: **Set the installment payment to start from the first period, the range is 1-13;
276 276  1. **List: **Configure a list based on [Maximum Periods] and [Begin Period],where user can configure the password and expiration time for each period.
... ... @@ -354,13 +354,13 @@
354 354  
355 355  1. Open "Project Settings" windows.
356 356  1. Open "Extend" sub-windows.
357 -1. Select "Startup" or "Running".
346 +1. Select "Startup" or [Running.
358 358  1. Set "Time".
359 359  1. Set "Password" if you require the password when entering the backstage interface.
360 360  
361 361  == Special expansion ==
362 362  
363 -"Special expansion" is for extending audio play and camera input functions for special HMI models.
352 +"Special Expansion" is for extending audio play and camera input functions for special HMI models.
364 364  
365 365  (% style="text-align:center" %)
366 366  [[image:05.Project Settings_html_784d40de9b3e3bda.png||height="109" width="543"]]
... ... @@ -397,8 +397,8 @@
397 397  
398 398  * These all three functions are not available for all HMIs, only special HMI models could support them.
399 399  * The details of "audio" settings, please refer to [[Audio>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HAudio]].
400 -* The details of "camera" settings, please refer to [[camera>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HrtspwebA0camera]].
401 -* The details of "mulit-link" settings, please refer to [[mulit-link>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HMulit-link]].
389 +* The details of ""camera" settings, please refer to [[camera>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HrtspwebA0camera]].
390 +* The details of ""mulit-link" settings, please refer to [[mulit-link>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HMulit-link]].
402 402  )))
403 403  
404 404  == Input device ==
... ... @@ -419,115 +419,6 @@
419 419  
420 420  The arrow will be display in screen when HMI is running, and keyboard could be used to enter code and control arrow.
421 421  
422 -**HotKey Configuration Description**  
423 -
424 -**Enable function**
425 -
426 - Select “Expansion" of "System Configuration"/"Engineering Parameters" in the toolbar of SACDA, and enable the keyboard before enabling the hotkeys, as shown in the following figure.
427 -
428 -(% style="text-align:center" %)
429 -[[image:57.jpg]]
430 -
431 -**Hotkey configuration**
432 -
433 - (1) Check the "HotKey Configuration" function. When the external keyboard is enabled, the hotkey function can be customized. By configuring the lua script corresponding to each hotkey, the specific functions can be executed after the hotkey is triggered.
434 -
435 -(% style="text-align:center" %)
436 -[[image:58.jpg]]
437 -
438 -|**System shortcut keys**|**Features**
439 -|(% rowspan="4" %)Shift+ "↓"|(((
440 -Switch mouse mode: Default mode: The mouse can move freely.
441 -
442 -This mode is only valid when the project configuration displays the mouse;
443 -)))
444 -|Switch mouse mode: The selected box mode. The border of the selected part is set red;
445 -|Switch mouse mode: The selected grayed out mode ，the selected part gray out；
446 -|Switch mouse mode: Mouse selected mode. The mouse rests on the selected part. This mode is only valid when the project configuration displays the mouse;
447 -|(% rowspan="5" %)Up, down, left and right direction keys|In the mouse movement mode, the free movement of the mouse cursor can be controlled;
448 -|In the mouse selected mode, the mouse cursor can be controlled to move directly to the center position of the specified parts of the current screen;
449 -|In the selected box mode, the selected parts of the current picture can be switched. The border of selected parts will be set red;
450 -|In the selected grayed out mode, the selected parts of the current picture can be switched. The selected parts will be grayed out;
451 -|In the mouse selected mode, selected box mode, selected grayed out mode, the types of widgets that support toggling selected widgets are bit switches, word switches, function switches, word status, super combination buttons, value inputs, text inputs, and lua custom;
452 -|Backspace|Backspace function in keyboard;
453 -|Spacebar|The first option is selected by default in the left and right option bars of the T9 keyboard;
454 -|Shift+ "↑"|SwitchT9keyboard input method mode;
455 -|Shift+ “←”|SwitchT9keyboard symbol mode;
456 -|Numbers 1-6 on the left side of the keyboard|6options corresponding to the left and right option bars of the T9 keyboard;
457 -|F1~~F6|6options corresponding to the left and right option bars of the T9 keyboard;
458 -|The "-" key next to Backspace|Left page turning of left and right option bars of T9 keyboard;
459 -|F7|Left page turning of left and right option bars of T9 keyboard;
460 -|The "+" key next to Backspace|Right page turning of left and right option bars of T9 keyboard;
461 -|F8|Right page turning of left and right option bars of T9 keyboard;
462 -|Shift+ "F7"|Page up of the upper and lower option columns of the T9 keyboard;
463 -|Shift+ "F8"|Page down of the upper and lower option columns of the T9 keyboard;
464 -|Shift+ "F1 ~~ F3"|3options corresponding to the up and down option bars of the T9 keyboard;
465 -|Shift+ "Backspace"|Same as esc, exit the keyboard;
466 -|Shift+Number and special symbol keys on the left side of the keyboard|Realize special character input, such as: ~~! @ # $% ^&* () _ + {}: "<>?
467 -|Ctrl + Shift (press Ctrl before Shift)|SwitchT9Pinyin, alphabet and number modes of keyboard;
468 -|Shift+Letter|In the lowercase mode of the keyboard: Shift +Letter, which can enter uppercase; In the uppercase mode: Shift +Letter, which can enter lowercase;
469 -|Num Lock|When the corresponding indicator light is not on, the keypad numbers are not allowed to be input;
470 -|(% rowspan="3" %)Enter|In the mouse movement mode and the mouse selected mode, press the Enter key, which indicates that it clicks at the mouse cursor position. (Corresponding to the press, lift and click event);
471 -|In the selected box mode and selected grayed out mode, select the object and then press the Enter key, which indicates that clicking triggers the center position of the selected area;
472 -|In the keyboard screen and not entering the mouse selected mode, the selected box mode, the selected gray-out mode. Press the Enter key, indicating that the input is completed;
473 -|Caps Lock|Switch letter case modes of the 1001and 1003 built-in keyboard. Lighting indicates switching to the uppercase mode;
474 -
475 -**System hotkeys**
476 -
477 -HMI screen itself comes with supported hotkey function.
478 -
479 -(% style="margin-right:auto" %)
480 -|HSW1892|Polling time interval setting for keyboard keys|(((
481 -~= 0, 50ms;
482 -
483 -~= 1, 40ms;
484 -
485 -~= 2, 30ms;
486 -
487 -~= 3, 20ms;
488 -
489 -~= 4, 10ms;
490 -)))
491 -|HSW1893|Cursor mode switching|(((
492 -~= 0, Default free mode;
493 -
494 -~= 1, The selected box mode;
495 -
496 -~= 2, The selected grayed out mode;
497 -
498 -~= 3, Mouse selected mode;
499 -)))
500 -|HSW1894|Enable specific serial keyboard|(((
501 -~= 1, Enable;
502 -
503 -~=Others, Disabled;
504 -
505 -{{info}}
506 -✎Note: Only initialization is valid, and it is recommended to use it in background initialization script;
507 -{{/info}}
508 -)))
509 -|HSW1895|Control whether keyboard keys take effect under certain circumstances|(((
510 -~= 0, When default screen rest and screensaver status, the button trigger does not take effect;
511 -
512 -~= 1, HSX1895.0=1. The button trigger will take effect when it is in the screen rest status;
513 -
514 -~= 2, HSX1895.1=1. The button trigger will take effect when it is in the screensaver status;
515 -)))
516 -|HSW10611|Set up server|(((
517 -~=0, Select the server configured in "Project Parameters"
518 -
519 -~=1, Select server 1
520 -
521 -~=2, Select server 2
522 -)))
523 -|HSW11767|Remote screen display adaptation mode switching  |== 0, Default mode. Horizontal screen project remote full screen zoom display; Vertical screen project remote zoom display in equal proportion;
524 -~= 1, Full-screen zoom display;
525 -~~= 2, According to the screen size ratio, zoom display in equal proportion;
526 -
527 -= 3, According to the screen pixels, no zoom display. =
528 -
529 -= 3: According to the screen pixels, no zoom display; =
530 -
531 531  == Lab ==
532 532  
533 533  Lab is used for enable experimental function.
... ... @@ -586,7 +586,7 @@
586 586  == FTP server ==
587 587  
588 588  (% style="text-align:center" %)
589 -[[image:image-20220808093816-5.png||class="img-thumbnail"]]
469 +[[image:image-20220808093816-5.png]]
590 590  
591 591  **Enable method: **"Project parameter" → "Extend" → check "FTP service".
592 592  
... ... @@ -594,13 +594,11 @@
594 594  
595 595  * Enter "ftp:~/~/ + the IP address of the HMI" in the folder address bar.
596 596  
597 -(% style="text-align:center" %)
598 -[[image:image-20220808094729-7.png||height="429" width="909" class="img-thumbnail"]]
477 +[[image:image-20220808094729-7.png]]
599 599  
600 600  * You can also enter “ftp:~/~/ftpuser:000000@192.168.39.242” to access the interface directly (with a username and password).
601 601  
602 -(% style="text-align:center" %)
603 -[[image:image-20220808100330-10.jpeg||class="img-thumbnail"]]
481 +[[image:image-20220808100330-10.jpeg]]
604 604  
605 605  * If the ftp service is enabled, it will prompt for a username and password, and if not, it will prompt that the connection to the server cannot be established.
606 606  
... ... @@ -610,7 +610,7 @@
610 610  * Enter the username and password as configured in the project.
611 611  
612 612  (% style="text-align:center" %)
613 -[[image:image-20220808100720-11.jpeg||class="img-thumbnail"]]
491 +[[image:image-20220808100720-11.jpeg]]
614 614  
615 615  **Description of folder and permission**
616 616  
... ... @@ -618,8 +618,7 @@
618 618  * DataLogFile is data log record. It can only download files, but cannot upload files.
619 619  * RecipeFile is recipe. It can only download files, but cannot upload files.
620 620  * UserMgrFile is operation record. It can only download files, but cannot upload files.
621 -* Sdcard is the mounting directory of SD card. There will be the subdirectory of S1, S2, S3, etc. when connected SD card. It can upload and download.
622 -* Udisk is the mounting directory of USB flash drive. There will be the subdirectory of U1, U2, U3, etc. when connected USB flash drive. It can upload and download.
499 +* Sdcard is the mounting directory of SD card. There will be the subdirectory of S1 to Sn when connected SD card. It can upload and download.
623 623  
624 624  (% class="box infomessage" %)
625 625  (((
... ... @@ -630,16 +630,19 @@
630 630  
631 631  Password modification: Use the changePsd function in the lua function ftpserver library to modify password.
632 632  
633 -* Prototype: ftpserver.changePsd(oldPsd,newPsd)
634 -* Function: change the login password of ftpserver
635 -* Parameters:
636 -** oldPsd(string) old password
637 -** newPsd(string) new password.
638 -* Format: only letters, numbers and underscores are allowed, and the length must be 6 to 8 digits.
639 -* Returns.
640 -** Success: true
641 -** Failure: nil,err
510 +Prototype: ftpserver.changePsd(oldPsd,newPsd)
642 642  
512 +Function: change the login password of ftpserver
513 +
514 +Parameters: oldPsd(string) old password, newPsd(string) new password. Format: only letters, numbers and underscores are allowed, and the length must be 6-8 digits.
515 +
516 +Returns.
517 +
518 + Success: true
519 +
520 + Failure: nil,err
521 +
522 +
643 643  = **Security** =
644 644  
645 645  Security means objects and screen security, but this function is only available in 3000i series and HMI+ series or above.
... ... @@ -647,32 +647,34 @@
647 647  Only when object password is set,object password function could be used in object.
648 648  
649 649  (% style="text-align:center" %)
650 -[[image:SecurityOverview.png]]
530 +[[image:安全设置 1.png||class="img-thumbnail"]]
651 651  
652 652  == Objects password ==
653 653  
654 -Users should enter password to access the protected object. This could avoid some misoperation on object. There are 12 levels in object password setting, and each level corresponds to each password.
534 +You should enter password to access the protected object. This could avoid some misoperation on object. There are 12 levels in object password setting, and each level corresponds to each password.
655 655  
656 656  (% style="text-align:center" %)
657 657  [[image:05.Project Settings_html_4835fff86888a26b.png||height="238" width="502"]]
658 658  
659 -**Enable object password: **Check it to enable object security function. There are 12 levels corresponding to different passwords. The password of levels is set by the highest level.
539 +**Enable object password: **Check it to enable object security function. There are 12 levels corresponding to different passwords. The password of levels are set by the highest level.
660 660  
661 -* **Passwords for levels:** It is used to set password for every level, it is composed of numbers and letters (case sensitive)within 8 digits.
662 -* **Start level:** It is used to set initial level while this function is enabled.
663 -* **Highest level**: It is used to set how many levels of password could be used.
664 -* **Independent password:**
665 -** **Unchecked: **You should enter the corresponding level password when unlocking each level of object, and the higher level password could unlock the lower level object.
666 -** **Checked:** You could only type the corresponding level password when unlocking each level of object.
541 +1. **Passwords for levels:** It is used for set password for every level, it is composed of numbers and letters (case sensitive)within 8 digits.
542 +1. **Start level:** It is used for set initial level while this function is enabled.
543 +1. **Highest level**: It is used for set how many levels of password could be used.
544 +1. **Independent password:**
667 667  
668 -(% class="box infomessage" %)
669 -✎**Note: **Object level password could be enabled in "Bit Switch", "Word Switch", "Function Switch", combination "Switch", "Numeric Input", "Character Input", "Drop-down List" etc.
546 +* **Unchecked: **You should enter the corresponding level password when unlocking each level of object, and the higher level password could unlock the lower level object.
547 +* **Checked:** You could only type the corresponding level password when unlocking each level of object.
670 670  
549 +✎**Note:**
550 +
551 +* Object level password could be enabled in "Bit Switch", "Word Switch", "Function Switch", vCombination Switch", "Numeric Input", "Character Input", "Drop-down List" etc.
552 +
671 671  (% style="text-align:center" %)
672 672  [[image:安全设置 2.png||class="img-thumbnail"]]
673 673  
674 -* The configured password could not be empty, otherwise, when users close the configuration screen, there will be an error: "Please set password for level".
675 -* If configured object password level is higher than highest password setting in Project Settingss, there will be an error note during compiling: "The security level of this object is out of range!" . Users need to set password level again to solve the problem.
556 +* The configured password could not be empty, otherwise when users close the configuration screen ,there will be an error: "please set password for level".
557 +* If configured object password level is higher than highest password setting in Project Settingss, there will be an error note during compiling: "the security level of this object is out of range!" .Users need to set password level again to solve the problem.
676 676  
677 677  == Screen Lock ==
678 678  
... ... @@ -685,47 +685,6 @@
685 685  1. **Password:** this password is used for unlocking screen, it is composed of numbers and letters (case sensitive) within 8 digits.
686 686  1. **Lock time:** It is used for setting time how long the screen will be locked if users do not operate, range: 1 to 240 minutes (integer).
687 687  
688 -== LAN Monitoring Security ==
689 -
690 -(% style="text-align:center" %)
691 -[[image:SecurityOption.png]]
692 -
693 -In the same Local Area Network, user can enter the IP of the HMI on the webpage to achieve LAN monitoring of the HMI
694 -
695 -The terminal access number of remote monitoring or LAN monitoring for each series of HMI models is limited, as following table shows:
696 -
697 -|=(% scope="row" style="width: 182px;" %)Model|=(% style="width: 178px;" %)System Version|=(% style="width: 153px;" %)LAN Monitoring|=(% style="width: 260px;" %)Remote Monitoring|=(% style="width: 241px;" %)Supported visits number
698 -|=(% style="width: 182px;" %)3000|(% style="width:178px" %)HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)×|(% style="width:241px" %)1
699 -|=(% style="width: 182px;" %)3000i|(% style="width:178px" %)HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)×|(% style="width:241px" %)1
700 -|=(% style="width: 182px;" %)3000ie|(% style="width:178px" %)HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)×|(% style="width:241px" %)1
701 -|=(% style="width: 182px;" %)3000ig-O|(% style="width:178px" %)HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)×|(% style="width:241px" %)1
702 -|=(% style="width: 182px;" %)3000ig/3000ig-C|(% style="width:178px" %)HMI V1.0/HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)✔|(% style="width:241px" %)4
703 -|=(% style="width: 182px;" %)8000|(% style="width:178px" %)HMI V1.0/HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)✔|(% style="width:241px" %)4
704 -|=(% style="width: 182px;" %)8000ig|(% style="width:178px" %)HMI V1.0/HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)✔|(% style="width:241px" %)4
705 -|=(% style="width: 182px;" %)9000|(% style="width:178px" %)HMI V1.0/HMI V2.0|(% style="width:153px" %)✔|(% style="width:260px" %)✔|(% style="width:241px" %)4
706 -
707 -After this function is enabled, user name and password need to be entered for LAN monitoring, which can avoid some uncontrollable security problems to a certain extent;
708 -
709 -{{info}}
710 -✎Note: This LAN Monitoring Security function is only supported by HMI V2.0 system and above.
711 -{{/info}}
712 -
713 -**Webpage monitoring**:
714 -
715 -After enable this function, when user input IP to access HMI, you need to enter the user name and password configured by HMI in the login interface first, and then you can access after verification(The login interface supports switching language between Chinese and English, the default is Chinese)
716 -
717 -(% style="text-align:center" %)
718 -[[image:LANSercuityloginpage.png]]
719 -
720 -If it is not configured this function in the project, it also can modify from the background interface.
721 -
722 -System->Extend
723 -
724 -(% style="text-align:center" %)
725 -[[image:LANBackground.png]]
726 -
727 -
728 -
729 729  = Font pack =
730 730  
731 731  "Font pack" is for setting built-in font for HMI project, in this way, the text in some objects of the HMI could be displayed in the desired font.
... ... @@ -746,7 +746,7 @@
746 746  [[image:image-20220614173008-2.png]]
747 747  
748 748  (% start="5" %)
749 -1. Click “OK” to save settings.
590 +1. Click [OK] to save settings.
750 750  
751 751  **Result**
752 752  
56.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Mora
Size
... ... @@ -1,1 +1,0 @@
1 -64.3 KB
Content
57.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Mora
Size
... ... @@ -1,1 +1,0 @@
1 -123.6 KB
Content
58.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Mora
Size
... ... @@ -1,1 +1,0 @@
1 -135.1 KB
Content
DynamicScreensaver.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -2.7 KB
Content
LANBackground.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -652.7 KB
Content
LANSercuityloginpage.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -68.1 KB
Content
ProjectSettingOverview.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -26.1 KB
Content
SecurityOption.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 KB
Content
SecurityOverview.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Hunter
Size
... ... @@ -1,1 +1,0 @@
1 -20.0 KB
Content