Changes for page 03 Project Settings

Last modified by Hunter on 2024/06/11 15:58

From 4.1 to 5.1 From 11.11 to 11.12

From version 5.1

edited by Stone Wu
on 2022/06/30 10:37

Change comment: There is no comment for this version

To version 11.11

edited by Stone Wu
on 2022/08/08 10:03

Change comment: (Autosaved)

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 10 added, 0 removed)

Details

Page properties

Parent

@@ -1,1 +1,1 @@
--PIStudio.1 User Manual.WebHome
++PIStudio.WebHome

Content

@@ -2,34 +2,32 @@
  The following steps will show how to change HMI project communication settings.
--**OperatingProcedure**
++**Operating procedure**
--1. Click "Project"->"Communication" to open setting window.
++Click "Project"->"Communication" to open setting window.
  (% style="text-align:center" %)
  [[image:image-20220614172512-1.png]]
--(% start="2" %)
--1. Click "Setting" to open "Communication device" window.
++Click "Setting" to open "Communication device" window.
  (% style="text-align:center" %)
  [[image:image-20220614172519-2.png]]
--(% start="3" %)
--1. Select connection way, device protocol.
--1. Click "Settings" to change communication parameters, COM is for serial connection, Device IP is for Ethernet connection.
++Select connection way, device protocol.
++Click "Settings" to change communication parameters, COM is for serial connection, Device IP is for Ethernet connection.
++
  (% style="text-align:center" %)
  [[image:image-20220614172524-3.png]]
--(% start="5" %)
--1. Click "OK" to save changes.
++Click "OK" to save changes.
  **Result**
  HMI communication is changed.
--= **Project Settings** =
++= **Project settings** =
  This place is mainly available for parameters settings, like model selection, storage method or some others parameters.
@@ -42,12 +42,12 @@
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_fc73c5d892676da1.png||height="252" width="212" class="img-thumbnail"]]
--== **{{id name="_Toc7072"/}}Project Settings** ==
++== Project settings ==
  (% style="text-align:center" %)
  [[image:工程设置 1.png||class="img-thumbnail"]]
--== **{{id name="_Toc17881"/}}HMI model** ==
++== HMI model ==
  "HMI Model" provides the function of modifying the HMI model to help the user switch the project to suit different models. Because different models have different resolution, when user trying to change this option, PIStudio will ask you whether want to generate a backup of older version project if you enable the option project backup.
@@ -54,7 +54,7 @@
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_768ecc1e77aaf98.png||height="134" width="538"]]
--**Operating Procedure**
++**Operating procedure**
 . Open "Project Settings" windows.
 . Select HMI Series.
@@ -62,7 +62,7 @@
 . Check the box of "Project backup" according to the needful.
 . Click "OK" to save settings and exit window.
--== **{{id name="_Toc26701"/}}Enable screensaver** ==
++== Enable screensaver ==
  Screensaver provides the function is that prevent the HMI from displaying the same screen for a long time due to unattended operation. After a certain interval, the HMI will jump into a screensaver screen.
@@ -69,9 +69,10 @@
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_9d248cebcde9d831.png||height="51" width="539"]]
--1. **Standby Time:** The interval time to enter the screensaver Range 0~~43200 seconds.
--1. **Screensave No.:** Set which screen will jump into when screensaver is executed.
++**Standby Time:** The interval time to enter the screensaver Range 0~~43200 seconds.
++**Screensave No.:** Set which screen will jump into when screensaver is executed.
++
  **Operating Procedure**
 . Open "Project Settings" windows.
@@ -79,11 +79,14 @@
 . Modify Standby Time according to your need.
 . Select screensaver screen in drop-down list, use screen No.1 for example.
++(% class="box infomessage" %)
++(((
  ✎**Note**: When the Screensaver and the Screen Lock are enabled at the same time, the Screensaver can only be unlocked after unlocking the Screen Lock.
++)))
--== **Initial screen** ==
++== Initial screen ==
--The [Initial screen] provides the interface to user to set initial screen. Initial screen means the first one displayed screen when HMI is powered on.
++The "Initial screen" provides the interface to user to set initial screen. Initial screen means the first one displayed screen when HMI is powered on.
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_562a3a4e9d3ef218.png||height="43" width="259"]]
@@ -94,7 +94,7 @@
 . Select initial screen in drop-list, use screen 2 as an example.
 . Click [OK] button to save setting and exit windows.
--== **{{id name="_Toc29634"/}}{{id name="_Toc479868165"/}}Operation record** ==
++== Operation record ==
  This setting needs to be used in conjunction with "User Permission" function, which is valid only when "User Permission" function is turned on. The detailed information of "User Permission", "Operation Record" is mainly recording the operation for the current user after user login.
@@ -101,7 +101,7 @@
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_ff3f128cf0a734a2.png||height="44" width="272"]]
--== **{{id name="_Toc13922"/}}Byte order** ==
++== Byte order ==
  Floating point is one of the commonly used data formats, and it is two-byte order mode. PIStudio provides the interface in "Project Settingss" for setting the byte order.The default mode is Little-endian. This function has no effect on the HSW addresses.
@@ -114,11 +114,11 @@
 . Select "Little-endian" or "Big-endian" mode.
 . Click "OK" button to save setting and exit window.
--== **{{id name="_Toc18233"/}}{{id name="_Toc479868167"/}}Switch action** ==
++== Switch action ==
  **Introduction**
--The [Switch action] provides the action trigger settings. It is the effect timing of when the button executes the action.
++The "Switch action" provides the action trigger settings. It is the effect timing of when the button executes the action.
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_59a2f3cd00554dc2.png||height="47" width="272"]]
@@ -132,7 +132,7 @@
 . Select switch action mode.
 . Click "OK" button to save setting and exit window.
--== **{{id name="_Toc479868168"/}}{{id name="_Toc13186"/}}Backlight** ==
++== Backlight ==
  "Backlight" is for controlling LCD, after designated time of inactivity, HMI LCD will turn OFF automatically, but this setting will be invalid when alarm is ON. The default setting is never turning OFF LCD.
@@ -145,7 +145,7 @@
 . Select duration time.
 . Click "OK" button to save setting and exit window.
--== **{{id name="_Toc479868169"/}}{{id name="_Toc22376"/}}{{id name="_Data_Record_Storage"/}}Data record storage** ==
++== Data record storage ==
  This setting needs to be used in conjunction with [Data Record] function, which is valid only when [Data Record] function is effective. The data record files will be saved in Flash.
@@ -158,7 +158,7 @@
 . Select storage path.
 . Click "OK" button to save setting and exit window.
--== **{{id name="_Toc479868173"/}}{{id name="_Toc3744"/}}Designer Password** ==
++== Designer Password ==
  "Designer Password" provides the encryption functions of the HMI project, including upload and decompile operations. Also it affects the user permissions, installments and other functions.
@@ -173,7 +173,7 @@
 . Enter password
 . Click "OK" button to save setting and exit windows
--== **{{id name="_Toc479868172"/}}Use Screen ID Address** ==
++== Use screen ID address ==
  "Use Screen ID address" provides the function of controlling HMI screens by specific address' value. The address could be set by the user.
@@ -195,7 +195,7 @@
  * If HDW0=1, HMI displays Screen No.1.
  * …
--= **{{id name="_Toc5327"/}}{{id name="_Toc479868175"/}}HMI IP settings** =
++= HMI IP settings =
  This is for setting HMI static IP (HMI also could support DHCP). When enable DHCP mode, the setting is invalid.
@@ -204,6 +204,8 @@
  (% style="text-align:center" %)
  [[image:HMI IP 1.png]]
++(% class="box infomessage" %)
++(((
  **✎Note:**
  * HMI backstage screen could select Wi-fi or Ethernet mode.
@@ -210,6 +210,7 @@
  * Wi-fi and Ethernet mode only can be switched by manual.
  * IP setting function only can be enabled when HMI is ethernet mode.
  * It is only supported by 8000 series.
++)))
  **Operating Procedure**
@@ -219,9 +219,9 @@
 . Enter IP.
 . {{id name="_Toc479868176"/}}{{id name="_Toc8172"/}}Click "OK" button to save setting and exit windows.
--== **Remote access password** ==
++== Remote access password ==
--[Remote Access Password] is for PI8000/PI9000 series HMI, the password is for remote function, when users use Smart APP on mobile or weconcloud website on PC, which could access HMI screen remotely, the APP or website will require this password.
++"Remote Access Password" is for PI8000/PI9000 series HMI, the password is for remote function, when users use Smart APP on mobile or weconcloud website on PC, which could access HMI screen remotely, the APP or website will require this password.
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_3edf539b482a57a8.png||height="51" width="412"]]
@@ -233,7 +233,7 @@
 . Enter password;
 . Click "OK" button to save setting and exit windows;
--== **Server of HMI Remote Access** ==
++== Server of HMI remote access ==
  "Server of HMI remote access" is for PI8000/PI9000 series with -R model HMIs, when users use Smart APP on mobile or weconcloud website on PC, there are two options from selection available for speed up access. Server 1 is for Chinese users, Server 2 is for aboard users.
@@ -240,7 +240,7 @@
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_e877533ce894d9f7.png||height="64" width="475"]]
--= **{{id name="_Toc30218"/}}Installment** =
++= **Installment** =
  "Installment" meets the needs of the designer or equipment manufacturer to provide the trial period to the end customer.
@@ -249,9 +249,8 @@
  (% style="text-align:center" %)
  [[image:分期付款 1.png||class="img-thumbnail"]]
--== **Static mode** ==
++== Static mode ==
--
  The expiry time and key of each period could not be empty, and they need to be configured in advance. And the expiry time of the latter period need to be later than the expiry of the previous period.
 . **Use admin key: **It can be used for unlock all expirations,in addition to each period key.If users select [use admin key] function,once users enter the admin key when HMI expires,the installment payment function will be disabled.
@@ -261,7 +261,7 @@
 . **List: **Configure a list based on [Maximum Periods] and [Begin Period],where user can configure the password and expiration time for each period.
 . **Use admin key: **It is independent password, and all the expired password can be unlocked by it. If you check it, the installment function would be disabled after you input the admin key. The key can be a combination of "A~~z", "a~~z" and "0~~9"(case-sensitive).
--== **Dynamic mode** ==
++== Dynamic mode ==
  To enable the function of the installment payment, you must set up the following parameters
@@ -300,6 +300,8 @@
 . **Clear Bit: **Clear bit when user enters the right installment password.
 . **Upcoming Alert:** HMI show the installment alert before expire date (before 1,3 or 5 days)
++(% class="box infomessage" %)
++(((
  **✎Note:**
 . The screen of setting intallment and enter password is the built-in sub-screen, and couldn't bue modified.
@@ -309,18 +309,19 @@
 . The password cannot exceed 6 characters. The password can be composed of three modes: numbers, letters, and Chinese characters. Chinese characters contain only three characters and letters are case sensitive. The three key modes can be mixed.
 . Each key corresponds to a admin key. After entering the admin key in the installment password interface pop up by HMI, the installment function will be turned off, that is, the installment password interface will no longer pop up. So you should not use the admin key at will, or open up the admin key to others.
 . In the dynamic mode of installment payments, select "Enable valid period for password", then the "valid days" must be the same day as the current time of HMI.  If the time is not the same day, then the generated password is invalid.
++)))
--== **Password tool** ==
++== Password tool ==
  (% class="wikigeneratedid" id="HPasswordtool" %)
--For the detail, please click [["Password tool">>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/14.Tools/#HPasswordtool]].
++For the detail, please click [["Password tool">>https://docs.we-con.com.cn/bin/view/PIStudio/14.Tools/#HPasswordtool]].
--= **{{id name="_Toc734"/}}Extend** =
++= **Extend** =
  (% style="text-align:center" %)
  [[image:扩展 1.png||class="img-thumbnail"]]
--== **{{id name="_Toc31631"/}}Into Setup** ==
++== Into setup ==
  It provides entrance ways of the backstage interface.
@@ -327,17 +327,13 @@
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_53acbd1d326cab4f.png||height="126" width="471"]]
--1. **Startup: **it means after the HMI starts and displays the LOGO, press and holding the upper-right corner within the set time is able to enter the background interface. If the time is exceeded the setting time, the long press would be invalid.
++* **Startup: **it means after the HMI starts and displays the LOGO, press and holding the upper-right corner within the set time is able to enter the background interface. If the time is exceeded the setting time, the long press would be invalid.
++** For example, the Time is 5 seconds, then within 5 seconds after the LOGO is displayed, long press the upper-right corner can normally enter the screen. But if more than 5 seconds, long press will not be able to access.
++* **Running: **it means when HMI running the project, press and holding the upper-right corner over certain time, it would enter the backstage interface.
++** For example, the Time is 5 seconds, then long press the upper-right corner lasting over 5 seconds, it would able to access.
--* For example, the Time is 5 seconds, then within 5 seconds after the LOGO is displayed, long press the upper-right corner can normally enter the screen. But if more than 5 seconds, long press will not be able to access.
++**Operating procedure**
--(% start="2" %)
--1. **Running: **it means when HMI running the project, press and holding the upper-right corner over certain time, it would enter the backstage interface.
--
--* For example, the Time is 5 seconds, then long press the upper-right corner lasting over 5 seconds, it would able to access.
--
--**Operating Procedure**
--
 . Open "Project Settings" windows.
 . Open "Extend" sub-windows.
 . Select "Startup" or [Running.
@@ -344,14 +344,14 @@
 . Set "Time".
 . Set "Password" if you require the password when entering the backstage interface.
--== **{{id name="_Toc3554"/}}Special Expansion** ==
++== Special expansion ==
--[Special Expansion] is for extending audio play and camera input functions for special HMI models.
++"Special Expansion" is for extending audio play and camera input functions for special HMI models.
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_784d40de9b3e3bda.png||height="109" width="543"]]
--**Operating Procedure**
++**Operating procedure**
 . Open "Project Settings" windows.
 . Open "Extend" sub-windows.
@@ -365,7 +365,7 @@
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_baff180660df10b7.png||height="43" width="388" class="img-thumbnail"]]
--**Operating Procedure of Multi-link**
++**Operating procedure of Multi-link**
 . Open "Project Settings" windows.
 . Open "Extend" sub-windows.
@@ -377,14 +377,17 @@
  One HMI can display in multiple screens, through Master-Slave connection.
++(% class="box infomessage" %)
++(((
  ✎**Note:**
  * These all three functions are not available for all HMIs, only special HMI models could support them.
--* The details of "audio" settings, please refer to [[Audio>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/11.Advanced%20Function/#HAudio]].
--* The details of ""camera" settings, please refer to [[camera>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/11.Advanced%20Function/#HAudio]].
--* The details of ""mulit-link" settings, please refer to [[mulit-link>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/11.Advanced%20Function/#HAudio]].
++* The details of "audio" settings, please refer to [[Audio>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HAudio]].
++* The details of ""camera" settings, please refer to [[camera>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HrtspwebA0camera]].
++* The details of ""mulit-link" settings, please refer to [[mulit-link>>https://docs.we-con.com.cn/bin/view/PIStudio/11.Advanced%20Function/#HMulit-link]].
++)))
--== **Input Device** ==
++== Input device ==
  It is used for enable input devices, like keyboard and mouse.
@@ -402,7 +402,7 @@
  The arrow will be display in screen when HMI is running, and keyboard could be used to enter code and control arrow.
--== **Lab** ==
++== Lab ==
  Lab is used for enable experimental function.
@@ -413,7 +413,7 @@
 . **Xml Optimization**: Improve xml operation efficiency and speed up screen compilation.
 . **Enable Lua Debugging**: Control the Lua debugging window whether opened or not when using the Lua script.
--== **Vector** ==
++== Vector ==
  It is the function deal with the display issue.
@@ -430,8 +430,57 @@
 . Check "Vector Font" or "Vector Image".
 . Click "OK" to save and exist.
--= **{{id name="_Toc29782"/}}Security** =
++== Udisk pop-up ==
++(% style="text-align:center" %)
++[[image:image-20220808091210-1.jpeg]]
++
++There are two methods to enable Udisk pop-up function.
++
++* Click "Project setting" → "Udick pop-up", the built-in screen 5004 would pop up after inserting the Udisk.
++* Udisk pop-up flag file: Create a blank text file in the root directory of the U disk, named "download.dat", and the screen could pop up after inserting the U disk.
++
++(% class="box infomessage" %)
++(((
++**✎Note:** The Udick pop-up function is only supported by the formware of  PIStudio V8.2.29_D20220302 and above. For the version of PIStudio, please refer to "About".
++)))
++
++**Udisk pop-up interface**
++
++The interface of the Udisk pop-up is 5004 built-in screen. If the pop-up interface is not operated within 10s of the pop-up, it will be closed automatically.
++
++(% style="text-align:center" %)
++[[image:image-20220808093055-3.jpeg||height="212" width="307"]]
++
++1. **Project: **Enter the download project interface.
++1. **Firmware: **Enter the download project interface.
++1. **Backstage: **Enter the backstage directly.
++1. **Exit: **Close the pop up screen.
++
++== FTP server ==
++
++(% style="text-align:center" %)
++[[image:image-20220808093816-5.png]]
++
++**Enable method: **"Project parameter" → "Extend" → check "FTP service".
++
++**Usage:**
++
++* Enter "ftp:~/~/ + the IP address of the HMI" in the folder address bar.
++
++[[image:image-20220808094729-7.png]]
++
++* You can also enter “ftp:~/~/ftpuser:000000@192.168.39.242” to access the interface directly (with a username and password).
++
++[[image:image-20220808100330-10.jpeg]]
++
++If the ftp service is enabled, it will prompt for a username and password, and if not, it will prompt that the connection to the server cannot be established.
++
++(% style="text-align:center" %)
++[[image:image-20220808100223-9.jpeg]]
++
++= **Security** =
++
  Security means objects and screen security, but this function is only available in 3000i series and HMI+ series or above.
  Only when object password is set,object password function could be used in object.
@@ -439,7 +439,7 @@
  (% style="text-align:center" %)
  [[image:安全设置 1.png||class="img-thumbnail"]]
--== **{{id name="_Toc16190"/}}Objects password** ==
++== Objects password ==
  You should enter password to access the protected object. This could avoid some misoperation on object. There are 12 levels in object password setting, and each level corresponds to each password.
@@ -446,7 +446,7 @@
  (% style="text-align:center" %)
  [[image:05.Project Settings_html_4835fff86888a26b.png||height="238" width="502"]]
--**(1) Enable object password: **Check it to enable object security function. There are 12 levels corresponding to different passwords. The password of levels are set by the highest level.
++**Enable object password: **Check it to enable object security function. There are 12 levels corresponding to different passwords. The password of levels are set by the highest level.
 . **Passwords for levels:** It is used for set password for every level, it is composed of numbers and letters (case sensitive)within 8 digits.
 . **Start level:** It is used for set initial level while this function is enabled.
@@ -466,7 +466,7 @@
  * The configured password could not be empty, otherwise when users close the configuration screen ,there will be an error: "please set password for level".
  * If configured object password level is higher than highest password setting in Project Settingss, there will be an error note during compiling: "the security level of this object is out of range!" .Users need to set password level again to solve the problem.
--== **{{id name="_Toc3790"/}}Screen Lock** ==
++== Screen Lock ==
  The screen lock function provides another way for the security of HMI operation. When clients do not perform any operation for a set period of time, the HMI screen would be locked, and the password is required when HMI is operated again.
@@ -477,7 +477,7 @@
 . **Password:** this password is used for unlocking screen, it is composed of numbers and letters (case sensitive) within 8 digits.
 . **Lock time:** It is used for setting time how long the screen will be locked if users do not operate, range: 1 to 240 minutes (integer).
--= **Font pack** =
++= Font pack =
  "Font pack" is for setting built-in font for HMI project, in this way, the text in some objects of the HMI could be displayed in the desired font.

image-20220808091210-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+41.7 KB

Content

image-20220808092928-2.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+759.0 KB

Content

image-20220808093055-3.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+743.9 KB

Content

image-20220808093713-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+9.9 KB

Content

image-20220808093816-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+2.1 KB

Content

image-20220808094244-6.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.3 KB

Content

image-20220808094729-7.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+40.2 KB

Content

image-20220808095752-8.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+35.7 KB

Content

image-20220808100223-9.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+26.8 KB

Content

image-20220808100330-10.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Stone

Size

...	...	@@ -1,0 +1,1 @@
	1	+56.1 KB

Content

Changes for page 03 Project Settings

Summary

Details

Navigation

Table of Contents