Changes for page 05 Objects

Last modified by Jett on 2025/04/08 13:50

From 4.3 to 4.2 From 21.1 to 20.1

From version 20.1

edited by Stone Wu
on 2022/08/08 14:20

Change comment: There is no comment for this version

To version 4.3

edited by Stone Wu
on 2022/06/30 11:08

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 3 removed)

Details

Page properties

Parent

@@ -1,1 +1,1 @@
--PIStudio.WebHome
++PIStudio.1 User Manual.WebHome

Content

@@ -4,11 +4,11 @@
  Different button has different function.Such as: Bit Switch; Bit lamp; Word Switch; Word lamp; Function Switch; Keypad Switch; Combination Switch.
--== Bit switch ==
++== **Bit switch** ==
  Bit switch is designed to access the bit-address of the PLC/HMI. When bit switch is triggered, the changing of "Write Address" depends on the mode setting. When "Read" option is selected, the "Read Address" is editable.
--=== General ===
++=== **General** ===
  To operate, monitor and display the specified PLC or HMI bit address. When the bit switch is pressed, the bit value of the operation address changes as described by the switch type. When Monitor is available, the state displayed by the bit switch is the state of the bit to which the monitor address is pointing.
@@ -15,12 +15,12 @@
  (% style="text-align:center" %)
  [[image:位开关 1.png||class="img-thumbnail"]]
--**Read-write**
++**(1) Read-write**
  * **Write Address: **Bit switch controls PLC or HMI address.
  * **Read Address: **Read and display PLC or HMI bit address state.
--**Mode**
++**(2) Mode**
  * **Set OFF:** set off the write address.
  * **Set ON:** set on the write address.
@@ -28,19 +28,19 @@
  * **Delay:** set off the write address after a delay. (for example: assign the delay time as 5, write address will be set off after released 5 ms.)
  * **Switch:** switch between 0 and 1 each time the switch is triggered.
--**Display**
++**(3) Display**
  * **Inverted Display: **Display the state picture and text of the object reversely.
  * **Quick Read: **The speed of configuring the object is prority to other objects.
--**Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;
++**(4) Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;
  * **Blink when ON: **blink when control bit is ON.
  * **Blink when OFF: **blink when control bit is OFF.
--**Minimum hold time: **Only when the time of pressing the object is greater than or equal to the set minimum hold time will the function of the object be performed.
++**(5) Minimum hold time: **Only when the time of pressing the object is greater than or equal to the set minimum hold time will the function of the object be performed.
--**Indirect addressing:**
++**(6) Indirect addressing:**
  * **Read address**: Use the value of the read address to determine the address A after deviation, and use the address A as the read address of the object.
@@ -52,86 +52,87 @@
  A word has 16 bits, divide 16 into 44, and the answer is 2, remainder 12. Therefore, the read address of object is update from HDX11.0 to HDX13.12, and the final read address is HDX13.12.
--**Write address**: It is the same as the read address.
++* **Write address**: It is the same as the read address.
--=== Text ===
++=== **Text** ===
  (% style="text-align:center" %)
  [[image:位开关 2.png||class="img-thumbnail"]]
--**All languages: **Edit the texts of all the languages of the object in a time. A maximum of 8 languages supported.
++1. **All languages: **Edit the texts of all the languages of the object in a time. A maximum of 8 languages supported.
  (% style="text-align:center" %)
  [[image:6.Objects_html_fd7dea026037c591.gif||class="img-thumbnail"]]
--**All states: **Edit the texts of all the states of the object in a time.
++(% start="2" %)
++1. **All states: **Edit the texts of all the states of the object in a time.
++1. **Font: **Set the font of the text after selecting the state. The number of the characters input is displayed.
++1. **Copy attribute to states:** Set the color of font after selecting state and text, and click "Copy attribute to states", then they would be in the same color.
++1. **Copy text: **Click it and the texts of all the objects would be the same.
++1. **Copy style: **Click it and the styles of all the objects would be the same.
--**Font: **Set the font of the text after selecting the state. The number of the characters input is displayed.
++=== **Graphic** ===
--**Copy attribute to states:** Set the color of font after selecting state and text, and click "Copy attribute to states", then they would be in the same color.
--
--**Copy text: **Click it and the texts of all the objects would be the same.
--
--**Copy style: **Click it and the styles of all the objects would be the same.
--
--=== Graphic ===
--
  (% style="text-align:center" %)
  [[image:位开关 3.png||class="img-thumbnail"]]
--**Bitmap:** You could design beautiful scenes with bitmap. Static diagram and bitmap with states are supported.
++1. **Bitmap:** You could design beautiful scenes with bitmap. Static diagram and bitmap with states are supported.
++1. **Vectogram: **Use to figure SVG vector diagram is concise and lively geometry, generally shows the various industrial field, with the performance of the more abundant than bitmap method, and the vector diagram drawing will not be needed or scaling distortion.
--**Vectogram: **Use to figure SVG vector diagram is concise and lively geometry, generally shows the various industrial field, with the performance of the more abundant than bitmap method, and the vector diagram drawing will not be needed or scaling distortion.
++=== **Security** ===
--=== Security ===
--
  (% style="text-align:center" %)
  [[image:位开关 4.png||class="img-thumbnail"]]
--**Object lock**
++**(1) Object lock**
  * **Lock address: **Using interlock address, address 0 means that the object would be locked and display a lock icon. Only when the interlock - bit address points to 1 will the bit switch be operated.
  * **Hide "lock" icon: **If don't want to display the icon, you may check it. will be "no show" lock "icon" tick.
  * **Lock when "ON":** check it and the bit address will be locked when the interlock address is set to 1.
--**Touch available: **If you check it, you could oeprate the object when you touch it.
++**(2) Touch available: **If you check it, you could oeprate the object when you touch it.
--**Enable beep: **If you check it, the object will beep when you touch it.
++**(3) Enable beep: **If you check it, the object will beep when you touch it.
--**Extended trigger funtions. **It is only valid for PLC address.
++**(4) Extended trigger funtions. **It is only valid for PLC address.
  (% style="text-align:center" %)
  [[image:位开关 6.png||class="img-thumbnail"]]
--**Access denied setting**
++**(5) Access denied setting**
  Users can set enable password for object. There are following operating setting when user permissions are insufficient. But "Pop login screen" and "Hide object" are mutually exclusive.
--* **Pop login screen**
--** Every time: Userlogin screen will pop-up when user permissions are insufficient;
--** When change user: Userlogin screen will pop-up when user permissions, and if users logged in successfully, the previous users will log out.
--** Pop once: userlogin screen will pop-up when user permissions are insufficient, but when user enter the right password, this object can be operated by anyone.
--* **Hide object: **When the user has no permission, the object is hided. When the user has the permission, the object is displayed and can be operated.
++1. **Pop login screen**
--=== Animation ===
++* Every time: Userlogin screen will pop-up when user permissions are insufficient;
++* When change user: Userlogin screen will pop-up when user permissions, and if users logged in successfully, the previous users will log out.
++* Pop once: userlogin screen will pop-up when user permissions are insufficient, but when user enter the right password, this object can be operated by anyone.
++(% start="2" %)
++1. **Hide object: **When the user has no permission, the object is hided. When the user has the permission, the object is displayed and can be operated.
++
++=== **Animation** ===
++
  (% style="text-align:center" %)
  [[image:位开关 5.png||class="img-thumbnail"]]
--**Data format**
++**(1) Data format**
  This format is for settings address, and it is fixed for all objects.
--**Proportion:**
++**(2) Proportion:**
  The proportional gain setting is a proportional change to the moving and scaling values. Result=Gain*original value+Offset. This function is just for display. Actual value is still the original value.
  For example, the HDW1 original value is 5, Gain is 0.001, Offset is 0. The final result will be displayed as 0.005, while HDW1 actual value still is 5.
--For example: If the proportional gain value is x and the moving or scaling value is y, then the actual moving or scaling value is (x*y).
++**For example:**
--**(Movement**
++If the proportional gain value is x and the moving or scaling value is y, then the actual moving or scaling value is (x*y).
++**(3) Movement**
++
  The function of [Movement] is to move the position of object on the screen according to the value of address and movement type.
  There are three movement type:
@@ -140,17 +140,17 @@
  * Y-axis movement.
  * XY-axis movement.
--**For ex**a**mple**
++**For example**
  If the starting address of the movement is HDW10 and the movement type is [XY axis movement], HDW10 controls the X-axis movement, and HDW11 controls the Y-axis movement.
--**Deform**
++**(4) Deform**
  Deform object display size on screen, mainly depends on width and height.
  Deform type: left, right, up, down, left and right, up and down, right/left and up/down, right/left or up/down.
--=== Address editor ===
++=== **Address editor** ===
  The address editor is a tool used to assist in generating address strings. The address of object is composed of connection, device station number,  device type and address number.
@@ -177,33 +177,35 @@
  * If selecting "User input", the result would be saved in the property of the object
  )))
--== Bit lamp ==
++== **Bit lamp** ==
  "Bit Lamp" could monitor and display the specified PLC or HMI bit address, and its state changes according to the specified address value.
  **Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_273aed06eb8f10f9.gif||class="img-thumbnail"]]
--**Address**: It is for setting specified PLC or HMI bit address。
++**(1) Address**: It is for setting specified PLC or HMI bit address。
--**Hide**
++**(2) Hide**
--* **Inverted Display: **Display reverse state of the picture and text. *for example, the value of write address is set ON, the OFF mode is displayed.
--* **Blinking: **Blinking while control bit is triggered, the frequency is editable;
--** Blink when ON: blink when control bit is ON.
--** Blink when OFF: blink when control bit is OFF.
--* **Hide: **Display or hide object by "Control Bit" state.
--* **Control bit: **For hide control.
--** **Hide mode: **hide when OFF; hide when ON;it could not operate if [Invisible] is checked.
--** **Invisible:** object keeps hidden during project running.
++1. **Inverted Display: **Display reverse state of the picture and text. *for example, the value of write address is set ON, the OFF mode is displayed.
++1. **Blinking: **Blinking while control bit is triggered, the frequency is editable;
--(% class="box infomessage" %)
--(((
--✎**Note:** For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
++* Blink when ON: blink when control bit is ON.
++* Blink when OFF: blink when control bit is OFF.
++(% start="3" %)
++1. **Hide: **Display or hide object by "Control Bit" state.
++1. **Control bit: **For hide control.
++
++* **Hide mode: **hide when OFF; hide when ON;it could not operate if [Invisible] is checked.
++* **Invisible:** object keeps hidden during project running.
++
++✎**Note:** For [[text>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HText]]/[[graphics>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HGraphic]]/[[animations>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HAmination]], see the "[[Bit Switch>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
++
  == **Word switch** ==
  "Word Switch" could change value of specified PLC or HMI word address, when the switch is triggered the value will be written to specified address.
@@ -213,7 +213,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_38205e64b9d02546.gif||class="img-thumbnail"]]
--**Edit**
++**(1) Edit**
  * **Read address: **Read value from specified address.
  * **Write address: **Write value to specified address.
@@ -220,11 +220,11 @@
  Read and write address could be the same;
--**Data format**
++**(2) Data format**
  * **Format**: It is for setting operating data format; it could support seven modes.
--**Mode**. It is for setting operating mode for value, it could support 3 modes.
++**(3) Mode**. It is for setting operating mode for value, it could support 3 modes.
  * **Set value: **Set a constant value for the word address.
  * **Increase: **Increase the [operand] value for each time the switch is triggered.
@@ -231,32 +231,31 @@
  * **Decrease:** Decrease the [operand] value for each time the switch is triggered.
  * **High/Low limit:** The value will not increase/decrease when the value reaches limits.
--(% class="box infomessage" %)
--(((
  ✎**Note:**
  * When 32-bit floating (7 digits) is selected, the operating length is double words.
--* For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
++* For [[text>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]/[[graphics>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HGraphic]]/[[Security>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HSecurity]]/[[animations>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HAmination]], see the "[[Bit Switch>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--== Word lamp ==
++== **Word lamp** ==
  "Word Lamp" could display value of specified PLC or HMI word address, the display state of the component changes as the value of the read address changes.
  **Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_975dc10baad35155.gif||class="img-thumbnail"]]
--**Address**
++**(1) Address**
--* **Read address:** read the value from specified address.
++**Read address:** read the value from specified address.
--**States settings**
++**(2) States settings**
--* **States count: **The default Word state displays the number of States 1, which could be selected by the drop-down list to display the state of object, range: 1-256.
--* **State value: **Users could set different values to correspond to different states, the setting window as below figure shows.
++**States count: **The default Word state displays the number of States 1, which could be selected by the drop-down list to display the state of object, range: 1-256.
++**State value: **Users could set different values to correspond to different states, the setting window as below figure shows.
++
  **For example**
  By default, when value of read address is 0, object displays state 0.
@@ -274,11 +274,12 @@
  **Show state: **When the value of the read address exceeds the set range value, the object will display the "Specified state". For example, set the maximum is state 7 (value is 6), when the read address of the value is greater than 6, it will display state 2 text and pictures.
--**Transform state**
++**(3) Transform state**
--* **Quick Read: **Directly read the value of the connected device without going through the HMI cache
--* **Auto transforms:** Object switch states automatically
++**Quick Read: **Directly read the value of the connected device without going through the HMI cache
++**Auto transforms:** Object switch states automatically
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_b643c9a6a4bd6919.gif||class="img-thumbnail"]]
@@ -298,12 +298,9 @@
  * **State decrease:** Decrease state for each time the switch is triggered.
  * **Last state:** The state will not increase/decrease when reaches limits.
--(% class="box infomessage" %)
--(((
--✎**Note:** For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
++✎**Note:** For [[text>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]/[[graphics>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HGraphic]]/[[Security>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HSecurity]]/[[animations>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HAmination]], see the "[[Bit Switch>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--== Keypad switch ==
++== **Keypad switch** ==
  Keypad switch is designed to input data manually; this object need to work with the Keypad.User could assign letters or numbers for each switch, when the switch is triggered the data will input to the textbox.
@@ -316,12 +316,9 @@
 . **Allow input: **It supports input with ASCII character.
 . **Enable Beep:** It is for beep function, enable or disable.
--(% class="box infomessage" %)
--(((
--✎**Note:** For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
++✎**Note:** For [[text>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]/[[graphics>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HGraphic]], see the "[[Bit Switch>>path:/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--== Function switch ==
++== **Function switch** ==
  Function switch is designed to switch screens, and call and close sub screen, and transfer data record files.
@@ -330,7 +330,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_31c4ad387507a16d.gif||class="img-thumbnail"]]
--**Operation**
++1. **Operation**
  * **Screen No: **Switch to the selected screen, it could not be subscreen;
  * **Open sub screen: **Pop-up selected sub screen, and set sub screen position, default position is (0, 0), this is the coordinates of the top left corner of the screen;
@@ -358,12 +358,10 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_a68f2b0b1bf2758c.gif||class="img-thumbnail"]]
--**Using trigger address**. As the figure above,when 00 is ON,then selected operation of the function switch will be executed.
++(% start="2" %)
++1. **Using trigger address**. As the figure above,when 00 is ON,then selected operation of the function switch will be executed.
++1. **All terminals effect**. When this function is enabled, all terminals (screens, mobile phones, ipads, computers, etc.) will execute the function Switch Function simultaneously. For example, the screens of each terminal are different. When the screen is clicked to jump to the "Home" screen, all terminals will jump to the home screen.
--**All terminals effect**. When this function is enabled, all terminals (screens, mobile phones, ipads, computers, etc.) will execute the function Switch Function simultaneously. For example, the screens of each terminal are different. When the screen is clicked to jump to the "Home" screen, all terminals will jump to the home screen.
--
--(% class="box infomessage" %)
--(((
  ✎**Note:**
 . Some special characters like \ : * ? “ <> | are not allowed in file path, otherwise an error (the following characters could not be included in the file name.| >< : * “ ? \) may occur.
@@ -376,18 +376,14 @@
  (% start="4" %)
 . When users save specified file, it is necessary to set specified file path and file name. Such as: "data/a.txt". If there is no file name in path, there will be an error: "please set source path!" or "Please set destination path!"
 . For [[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]/[[graphics>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HGraphic]]/[[Security>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HSecurity]]/[[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--)))
--== Combination switch ==
++== **Combination Switch** ==
  The combination switch supports the collection of multiple functions onto one object. When the object is pressed, multiple functions are arranged in sequence to meet the special requirements of user.
  The combination switch contains sub-functions such as bit operation, word operation, arithmetic and screen change. Click the corresponding button on the "General" of the object to add sub-functions to the list, and up to 100 sub-functions can be added.
--(% class="box infomessage" %)
--(((
  ✎**Note:** there can only be one screen change function in the added sub-functions, and it is at the end of the list).
--)))
  **Description**
@@ -394,7 +394,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_9a71b56fbf80e666.gif||class="img-thumbnail"]]
--**Bit operation**
++**(1) Bit operation**
  (% style="text-align:center" %)
  [[image:6.Objects_html_c750a09f5dbfa752.gif||class="img-thumbnail"]]
@@ -403,9 +403,9 @@
  **Bit address length: **The length of operated addresses;
--Example: "Target bit address" is 00, "Type" is Set ON,the length is 3,when press the button,the 00~~02 will be ON.
++**Example: "**Target bit address" is 00, "Type" is Set ON,the length is 3,when press the button,the 00~~02 will be ON.
--**Word operation**
++**(2) Word operation**
  (% style="text-align:center" %)
@@ -420,7 +420,7 @@
  * If "Target word address" is 40, "Type" is Word set,and operand is 10,the length is 3,when press the button,the 40~~42 will be 10.
--**Arithmetic**
++**(3) Arithmetic**
  (% style="text-align:center" %)
  [[image:6.Objects_html_ab29c7e6e94aae46.gif||class="img-thumbnail"]]
@@ -427,7 +427,7 @@
  It provides functions such as "Add", "Subtract", "Multiply", "Divide", "Mod' and "Power".
--**Screen change**
++**(4) Screen change**
  It provides screen switch function as [Function Switch], it supports "Previous", "Next", "Return" and "Change to" operations.
@@ -434,11 +434,11 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_7c228a61fec158e9.gif||class="img-thumbnail"]]
--**Operation list**
++**(5) Operations list**
  "Operations list" displays all operations, HMI will execute operations in order, but [screen switch] will be listed as the last execution item directly.
--**Operation button**
++**(6) Operation button**
  * **Delete: **Delete selected item function;
  * **Empty: **Delete all items in operation list;
@@ -445,7 +445,7 @@
  * **Up:** Move the selected item up one row in operation list;
  * **Down: **Move the selected item down one row in operation list;
--**Advanced setting**
++**(7) Advanced setting**
  Control the whole combination switch configuration.
@@ -460,16 +460,19 @@
  ✎**Note:**
--* Nested patterns of object cycle and sub-function cycles are as follows.
--** The cycle time are independent.
--** The object performs one cycle, all the sub-functions would be performed once.
--** If the object cycle ends earlier than the sub-function cycle, and the sub-function would completes the remaining number of cycles.
--** If the object cycle ends later than the sub-function cycle, and the sub-function cycle would be triggered again.
--** If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.
--* For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
++1. Nested patterns of object cycle and sub-function cycles are as follows.
--== Slider switch ==
++* The cycle time are independent.
++* The object performs one cycle, all the sub-functions would be performed once.
++* If the object cycle ends earlier than the sub-function cycle, and the sub-function would completes the remaining number of cycles.
++* If the object cycle ends later than the sub-function cycle, and the sub-function cycle would be triggered again.
++* If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.
++(% start="2" %)
++1. For [[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]/[[graphics>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HGraphic]]/[[Security>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HSecurity]]/[[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
++
++== **Slider switch** ==
++
  Slide switch is a special switch object. By changing the position of the slider, the corresponding address value would be changed. At the same time, the slider position will change according to the address value.
  **Description**
@@ -499,10 +499,7 @@
 . **Alarm value:** input the alarm value
 . **Alarm color : **When "Alarm color" is ticked off, and the value of the device address reaches "Alarm value", the foreground color of the slide switch will be displayed as a warning color.
--(% class="box infomessage" %)
--(((
  **✎Note: **Setting the number of decimal place will scale the data range in the data format and it is valid for all kind data formats
--)))
  (% style="text-align:center" %)
  [[image:6.Objects_html_65b8338bfb56a238.gif||class="img-thumbnail"]]
@@ -517,34 +517,36 @@
  **(5) Slider**
--* **Color: **Tick off to display the slider color, otherwise it is displayed transparently.
--* **Shape: **Set the slider style (square or circle).
--** When circle is selected, need to set the diameter of the slider.
--** When square is selected, need to set the height and width of the slider.
++1. **Color: **Tick off to display the slider color, otherwise it is displayed transparently.
++1. **Shape: **Set the slider style (square or circle).
++* When circle is selected, need to set the diameter of the slider.
++* When square is selected, need to set the height and width of the slider.
++
  The width, height and diameter of the slide rail and slider are displayed as a percentage relative to the height of the object.
--* When the slide rail is displayed horizontally
--** The height of the slide rail is displayed as a percentage of the height of the object.
--** The diameter of the circular slider is displayed as a percentage of the height of the object, and it is recommended that the diameter of the slider be greater than or equal to 2 times the height of the slide rail.
--** The width and height of the square slider are displayed as a percentage of the height of the part, and it is recommended that the width of the slider should be greater than or equal to the height of the slide rail.
--* When the rails are displayed vertically
--** The height of the slide rail is displayed as a percentage of the width of the part.
--** The diameter of the circular slider is displayed as a percentage of the width of the object, and it is recommended that the diameter of the slider should be greater than or equal to 2 times the width of the slide rail.
--** The width and height of the square slider are displayed as a percentage of the width of the object, and it is recommended that the width of the slider should be greater than or equal to the width of the slide rail.
++1. When the slide rail is displayed horizontally
++* The height of the slide rail is displayed as a percentage of the height of the object.
++* The diameter of the circular slider is displayed as a percentage of the height of the object, and it is recommended that the diameter of the slider be greater than or equal to 2 times the height of the slide rail.
++* The width and height of the square slider are displayed as a percentage of the height of the part, and it is recommended that the width of the slider should be greater than or equal to the height of the slide rail.
++
++(% start="2" %)
++1. When the rails are displayed vertically
++
++* The height of the slide rail is displayed as a percentage of the width of the part.
++* The diameter of the circular slider is displayed as a percentage of the width of the object, and it is recommended that the diameter of the slider should be greater than or equal to 2 times the width of the slide rail.
++* The width and height of the square slider are displayed as a percentage of the width of the object, and it is recommended that the width of the slider should be greater than or equal to the width of the slide rail.
++
  **(6) Preview**: Display the setting result of slider switch.
--(% class="box infomessage" %)
--(((
--✎**Note:** For [[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
++✎**Note:** For [[graphics>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HGraphic]] see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
  = **Input/Display** =
  This object can input/display number or character. User just needs to set a controller's address and set data format. HMI will be able to display/control controller's data.
--== Numeric Input/Display ==
++== **Numeric Input/Display** ==
  "Numeric Input/Display" displays the device's data or writes data to the device in a specified numeric format, and the data could be scaled.
@@ -553,20 +553,18 @@
  **(1) General**
--* **Read Address:** The data from designated address will be displayed.
--* **Input: **Enable input function and "Write Address" configuration.
--* **Same read-write address:** Configure [Write Address] is the same as "Read Address".
--* **Write address: **Write data to designated address. The address could be different "Read Address".
--* **Keypad:** it is standard numeric keypad, allow to input decimal and floating;
++1. **Read Address:** The data from designated address will be displayed.
++1. **Input: **Enable input function and "Write Address" configuration.
++1. **Same read-write address:** Configure [Write Address] is the same as "Read Address".
++1. **Write address: **Write data to designated address. The address could be different "Read Address".
++1. **Keypad:** it is standard numeric keypad, allow to input decimal and floating;
--(% class="box infomessage" %)
--(((
  **✎Note: **Check it to use the comment information on the keyboard. When the user clicks on the part, the comment information will be written into the HUW1402 for display. The maximum length allowed for the comment is 63 characters;
--)))
--* **Continuous Input: **Use the same keyboard to input the objects from the same Group NO according to the order of NO, and automatically close the keyboard after the last NO(object) is input;
--* **NO: **the number of numeric input object;
--* **Group NO: **the group number of numeric input object;
++(% start="6" %)
++1. **Continuous Input: **Use the same keyboard to input the objects from the same Group NO according to the order of NO, and automatically close the keyboard after the last NO(object) is input;
++1. **NO: **the number of numeric input object;
++1. **Group NO: **the group number of numeric input object;
  **(2) Display**
@@ -573,13 +573,13 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_a6448568aa9b4008.gif||class="img-thumbnail"]]
--* **Font:** It is located to font list; user could select font directly.
--* **Trim 0 display**: The last digit of the decimal only display the non-zero part, such as: 6.30 will be displayed as 6.3.
--* **Input as "*":** the data shown as "*".
--* **Alignment:** There are three modes.
--* **Center:** data display on the center of object.
--* **Align left: **data display on the left.
--* **Align right: **data display on the right.
++1. **Font:** It is located to font list; user could select font directly.
++1. **Trim 0 display**: The last digit of the decimal only display the non-zero part, such as: 6.30 will be displayed as 6.3.
++1. **Input as "*":** the data shown as "*".
++1. **Alignment:** There are three modes.
++1. **Center:** data display on the center of object.
++1. **Align left: **data display on the left.
++1. **Align right: **data display on the right.
  **(3) Data format**
@@ -586,14 +586,15 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_52ba758ebcea03f2.gif||class="img-thumbnail"]]
--* **Date: **Select data format, below format could be supported.
++**Date: **Select data format, below format could be supported.
  (% style="text-align:center" %)
  [[image:6.Objects_html_29902078fa1f9af5.gif||class="img-thumbnail"]]
--* **Data format:** Configure data display format.
--* **Range:** beyond the data range will be not inputted.
++**Data format:** Configure data display format.
++**Range:** beyond the data range will be not inputted.
++
  **(4) Keypad position**
  It is used for setting keypad position when input data.
@@ -602,15 +602,12 @@
  Configure label shown on the left/ right side of data.
--(% class="box infomessage" %)
--(((
  ✎**Note:**
  * The significant digits of a single-precision float are 7 digits.
--* For [[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
++* For [[graphics>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HGraphic]]/[[Security>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HSecurity]]/[[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--== Character Input/Display ==
++== **Character Input/Display** ==
  "Numeric Input/Display" displays the device's character or writes character to the device.
@@ -619,48 +619,40 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_947ed6af324464.gif||class="img-thumbnail"]]
--**General**
++**(1) General**
--* **Read Address:** The data from designated address will be displayed.
--* **Input: **Enable input function and "Write Address" configuration.
--* **Same read-write address:** Configure "Write Address" is the same as "Read Address".
--* **Read DWord: **Read address is 2 words format
--* **Write address: **Write data to designated address. The address could be different "Read Address".
--* **Keypad:** it is standard numeric keypad, allow to input decimal and floating;
++1. **Read Address:** The data from designated address will be displayed.
++1. **Input: **Enable input function and "Write Address" configuration.
++1. **Same read-write address:** Configure "Write Address" is the same as "Read Address".
++1. **Read DWord: **Read address is 2 words format
++1. **Write address: **Write data to designated address. The address could be different "Read Address".
++1. **Keypad:** it is standard numeric keypad, allow to input decimal and floating;
--(% class="box infomessage" %)
--(((
  **✎Note:** ** **Check it to use the comment information on the keyboard. When the user clicks on the part, the comment information will be written into the HUW1402 for display. The maximum length allowed for the comment is 63 characters;
--)))
--* **Continuous Input: **Use the same keyboard to input the objects from the same Group NO according to the order of NO, and automatically close the keyboard after the last NO (object) is input.
--* **NO: **the number of numeric input object.
--* **Group NO: **the group number of numeric input object.
++(% start="7" %)
++1. **Continuous Input: **Use the same keyboard to input the objects from the same Group NO according to the order of NO, and automatically close the keyboard after the last NO (object) is input.
++1. **NO: **the number of numeric input object.
++1. **Group NO: **the group number of numeric input object.
--(% class="box infomessage" %)
--(((
  **✎Note:** The Continuous Input function will be invalid if the Confirmation function is enabled.
--)))
--**Display**
++**(2) Display**
--* **Input as "*":** the data shown as "*".
--* **Alignment:** There are three modes.
--* **Center:** data display on the center of object.
--* **Align left: **data display on the left.
--* **Align right: **data display on the right.
--* **Exchange high-low byte: **Exchange High-low byte: Check it to exchange and display the contents of the high and low bytes. If the number of contents is not a multiple of 2, the rounding process will be performed.
--* **Length: **The length for characters, the maximum length is 256.
--* **Exchange high-low word: **Check it to exchange and display the contents of high and low word. Only valid if the number of operating characters of the part is a multiple of 4.
++1. **Input as "*":** the data shown as "*".
++1. **Alignment:** There are three modes.
++1. **Center:** data display on the center of object.
++1. **Align left: **data display on the left.
++1. **Align right: **data display on the right.
++1. **Exchange high-low byte: **Exchange High-low byte: Check it to exchange and display the contents of the high and low bytes. If the number of contents is not a multiple of 2, the rounding process will be performed.
++1. **Length: **The length for characters, the maximum length is 256.
++1. **Exchange high-low word: **Check it to exchange and display the contents of high and low word. Only valid if the number of operating characters of the part is a multiple of 4.
--**Keypad position**
++**(3) Keypad position**
  It is used for setting keypad position when input data.
--(% class="box infomessage" %)
--(((
--✎**Note:** For [[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
++✎**Note:** For [[graphics>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HGraphic]]/[[Security>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HSecurity]]/[[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
  = **Chart** =
@@ -668,13 +668,13 @@
  For example: Trend graph shows the data as a dynamic curve, the X axis represent the time, Y axis represent the data. Alarm Record Display record alarm, the time span set by the user, and the alarm record will list by the time sequence.
--== Common settings ==
++== **Common settings in chart objects** ==
  **Introduction**
  This section will introduce common settings in Chart objects
--**Shape**
++**(1) Shape**
  (% style="text-align:center" %)
  [[image:6.Objects_html_9f4692cce1805843.gif||class="img-thumbnail"]]
@@ -681,19 +681,19 @@
  Set appearance of object, includes background color, head color, text color, line color, select row color
--**Advance**
++**(2) Advance**
  (% style="text-align:center" %)
  [[image:6.Objects_html_54a82434205332fb.gif||class="img-thumbnail"]]
--* **Head text color**: It sets the text color of the header.
--* **Transparency**: It sets transparency of the table background, 0% represents full transparency, and 100% represents completely opaque.
--* **Cell type**: Default is adaptive width. After select a customization, customization could set the width of the cell.
--* **Date and time format: **According to the needs to select the date and time display format. "NONE" means no display; please do not set both time and date to "NONE".
++1. **Head text color**: It sets the text color of the header.
++1. **Transparency**: It sets transparency of the table background, 0% represents full transparency, and 100% represents completely opaque.
++1. **Cell type**: Default is adaptive width. After select a customization, customization could set the width of the cell.
++1. **Date and time format: **According to the needs to select the date and time display format. "NONE" means no display; please do not set both time and date to "NONE".
--**Function start address**
++**(3) Function start address**
--Instructions for the use of the function start address of record display/alarm display/trend charts etc.
++**Instructions for the use of the function start address of record display/alarm display/trend charts etc.**
  (% style="text-align:center" %)
  [[image:6.Objects_html_361b1ee164769c5d.gif||class="img-thumbnail"]]
@@ -756,27 +756,27 @@
  * When the start time and end time of the query are enabled, if the end time is smaller than the start time, the system automatically swaps the start and end times to calculate the span of the query;
  * After manually setting the start time and end time of the query, you need to manually update the data (the default will be automatically updated);
--**Appearance**
++**(4) Appearance**
  (% style="text-align:center" %)
  [[image:6.Objects_html_71f505c7146db030.gif||class="img-thumbnail"]]
--* **Background type:** There are four modes, style 1 and style 2 is gradient mode, style 3 is solid color mode, style 4 is transparent.
--* **Transparency:** transparency could be set from 0% to 100%. when set to 0%,the background is completely transparent.
--* **Position: **Show position coordinates for X and Y axes.
--* **Size: **Set object size.
++1. **Background type:** There are four modes, style 1 and style 2 is gradient mode, style 3 is solid color mode, style 4 is transparent.
++1. **Transparency:** transparency could be set from 0% to 100%. when set to 0%,the background is completely transparent.
++1. **Position: **Show position coordinates for X and Y axes.
++1. **Size: **Set object size.
  (% style="text-align:center" %)
  [[image:6.Objects_html_64c6da58525278cb.gif||class="img-thumbnail"]]
--* **Number of X,Y axis: **Set the number of grids on the XY axis could be set from 1 to 10 divisions.
--* **Color setting: **Color1 is for object frame;color2 is for grid background.
--* **Show dot:** Display the data points of each trend graph.
--* **User font: **If check it, user could change the font for grid and time, if uncheck it, object uses build-in font.
--* **Grid color: **Set color for grid, the default is black.
--* **Scale color:** Set color for scale, the default is black.
--* **Scale value color:** Set color for scale value, the default is black.
--* **Data format:** select data format in object, it provides below format.
++1. **Number of X,Y axis: **Set the number of grids on the XY axis could be set from 1 to 10 divisions.
++1. **Color setting: **Color1 is for object frame;color2 is for grid background.
++1. **Show dot:** Display the data points of each trend graph.
++1. **User font: **If check it, user could change the font for grid and time, if uncheck it, object uses build-in font.
++1. **Grid color: **Set color for grid, the default is black.
++1. **Scale color:** Set color for scale, the default is black.
++1. **Scale value color:** Set color for scale value, the default is black.
++1. **Data format:** select data format in object, it provides below format.
  (% style="text-align:center" %)
  [[image:6.Objects_html_9a454f1917bd1b77.gif||class="img-thumbnail"]]
@@ -791,14 +791,14 @@
 . **Line type:** Set the line type (line, curve) between two points.
 . **Smoothness:** it sets the smoothness of curve. Smoothness sets the curve smoothness. Conversely, the corner of the curve is sharper.
--== Real-time trend chart ==
++== **Real-time trend chart** ==
  Trend graph shows the data as a dynamic curve, X axis represent the time span, Y axis represent the data.
--**Source**
++**(1) Source**
--* **Curve buffer: **Select data from and display data in term of curve.
--* **Curve displays:** HMI will display curves according to select [Trend Chart], and user could select which curves need to be displayed and select [Line type] and [Color]for each curve.
++1. **Curve buffer: **Select data from and display data in term of curve.
++1. **Curve displays:** HMI will display curves according to select [Trend Chart], and user could select which curves need to be displayed and select [Line type] and [Color]for each curve.
  (% style="text-align:center" %)
  [[image:image-20220616160423-7.png]]
@@ -806,42 +806,43 @@
  (% style="text-align:center" %)
  [[image:image-20220616160432-8.png]]
--**Range**
++**(2) Range**
++
  Set data range limit of curve (max and min). Also, could set variable to control data range.
  (% style="text-align:center" %)
  [[image:image-20220616160834-11.png||class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
--**✎Note:** For the setting of Real-time trend chart, please refer to "[[Trend chart>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HTrendchart]]"
--)))
++**✎Note: For the setting of Real-time trend chart, please refer to "[[Trend chart>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#HTrendchart]]"**
--== History trend chart ==
++== **History trend chart** ==
  The history trend will display data record with graph.X axis represents as time, and Y axis represents as data.
--**Source**
++**(1) Source**
--* **Curve buffer: **Select data from "Data record", and display data in term of curve.
--* **Curve displays: **HMI will display curves according to select "Data record", and user could select which curves need to be displayed and select "Line type", "Color" and select "Channel" for each curve.
++1. **Curve buffer: **Select data from "Data record", and display data in term of curve.
++1. **Curve displays: **HMI will display curves according to select "Data record", and user could select which curves need to be displayed and select "Line type", "Color" and select "Channel" for each curve.
  (% style="text-align:center" %)
  [[image:image-20220616160909-12.png]]
--**Range**
++**(2) Range**
  Set data range limit of curve (max and min). Also could set variable to control data range;
--**Function**
++(% style="text-align:center" %)
++[[image:http://docs.we-con.com.cn/wiki/pistudio/download/Helps/06.Objects/WebHome/6.Objects_html_1063368854592432.gif?rev=1.1||class="img-thumbnail"]]
++**(3) Function**
++
  (% style="text-align:center" %)
  [[image:image-20220616160920-14.png||class="img-thumbnail"]]
--* **Start address: **Custom object for query function, HMI system assigns address according to the settings, and four control key and query screen will be created, user could see the query details in this query screen.
--* **Use Dynamic channel: **It occupies 8 addresses; each address corresponds to the curve channel number. For example, the address is set to HDW10, it takes up HDW10 to HDW17. Where the value of HDW10 is 3, then the first curve in the trend graph shows the value of channel 3.
--* **Start time: **Set start time and span for curve display.
++1. **Start address: **Custom object for query function, HMI system assigns address according to the settings, and four control key and query screen will be created, user could see the query details in this query screen.
++1. **Use Dynamic channel: **It occupies 8 addresses; each address corresponds to the curve channel number. For example, the address is set to HDW10, it takes up HDW10 to HDW17. Where the value of HDW10 is 3, then the first curve in the trend graph shows the value of channel 3.
++1. **Start time: **Set start time and span for curve display.
  **Result**
@@ -848,7 +848,7 @@
  When all configurations are completed, when the HMI is running, it displays as shown below.
  (% style="text-align:center" %)
--[[image:image-20220802113935-1.gif]]
++[[image:http://docs.we-con.com.cn/wiki/pistudio/download/Helps/06.Objects/WebHome/6.Objects_html_1063368854592432.gif?rev=1.1||alt="6.Objects_html_1063368854592432.gif" height="325" width="567" class="img-thumbnail"]]
  There are 8 buttons will display in below the graph, shown as following.
@@ -861,10 +861,7 @@
 . [[image:image-20220616162028-21.png]]  Zoom in by one time according to the length of the span.
 . [[image:image-20220616162032-22.png]] :Zoom out by one time according to the length of the span.
--(% class="box infomessage" %)
--(((
--**✎Note: **For the setting of historical trend chart, please refer to "[[Trend chart>>path:https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HTrendchart]]".
--)))
++**✎Note: For the setting of historical trend chart, please refer to "[[Trend chart>>path:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#HTrendchart]]".**
  == **Alarm record display** ==
@@ -932,15 +932,15 @@
  * Left operation buttons: [<] means moving left column; [<<] means moving the display to the left.
  * Right operation buttons: [>] means moving right column; [>>] means moving the display to right.
--**✎Note:** Please click here to set "[[Bit alarm>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HBitalarm]]" and "[[Word alarm>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HWordalarm]]".
++**✎Note:** Please click here to set "[[Bit alarm>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#H8.4.1BitAlarm]]" and "[[Word alarm>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#H8.4.2WordAlarm]]".
--== **Data record display** ==
++== **Data Record Display** ==
  "Data Record Display" displays the value of the address set by the user in the data record in the form of a table. It provides the function of query. You could query all the recored data within a specified period. If the project does not edit data recored area or there is no historical data, data record would display nothing. You can dynamically set the query period on the HMI and save the power failure.
  ✎**Note: **The objects sunch as tables and trends charts are only support **"**song typeface". It is invalid if you set other fonts.
--This object only displays content normally after the "[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Data record__>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HDatarecord]](%%)" function is set.
++This object only displays content normally after the "[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Data record__>>path:#_Data_Record]](%%)" function is set.
  (% style="text-align:center" %)
  [[image:6.Objects_html_2ee00a2b90c062f6.gif||class="img-thumbnail"]]
@@ -971,7 +971,7 @@
 . **Channel control address:** It continuously occupies 8-word addresses, the first 100-bit addresses control 100 channels of display/hide function. For example, if the address is set to HDW10, then HDX10.0=1 is hidden channel 1; HDX10.1=1 is hidden channel 2, and so on.
 . **Freeze first column:** Enable it, the first column (time column) of the data record will not move with the left and right pages.
--For details about "function address", see "[[Common settings in chart objects>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCommonsettings]]".
++For details about "function address", see "[[Common settings in chart objects>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HCommonsettingsinchartobjects]]".
  The query key is automatically displayed when user double-clicks object, and the system automatically generates a sub-screen that sets the query span. When all configurations are completed, when the HMI is running, data record display object displays as shown below.
@@ -989,13 +989,13 @@
  * [[image:右翻 1.png||height="50" width="50" class="img-thumbnail"]]move one row right in the query range
  * [[image:右翻 2.png||height="50" width="50" class="img-thumbnail"]]move one page right in the query range
--For details about the setting, please refer to "[[Data record display settings>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HDatarecorddisplay]]".
++For details about the setting, please refer to "[[Data record display settings>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#HSettings]]".
  == **Recipe display** ==
  "Recipe display" displays information (such as recipe, operations, and so on) in the form of a table.
--This object not only displays the recipe, but also displays other content. The specific functions are described in detail later. And it only displays content normally after function is set.
++This object not only displays the recipe, but also displays other content. The specific functions are described in detail later. And it only displays content normally afterfunction is set.
  **There are 8 types of operating files as follows. Except for recipe file, the other types are used for special purpose. **
@@ -1084,7 +1084,7 @@
  **Start address: **Control displaying start fromspecified column, which means display from specified member.
--For example, set 420,
++Forexample, set 420,
  * If 420=1, Start from first column (first member).
  * If 420=2, Start from second column (second member).
@@ -1093,7 +1093,7 @@
  **Address number: **Control the number of columns displayed.
--For example, set 430,
++Forexample, set 430,
  * If 430=1, this object only displays 1 column (1 member).
  * If 430=2, this object displays 2 columns (2 members).
@@ -1124,7 +1124,7 @@
  * If the file type is recipe file, modify the value of the address of "Select line" to control the selected line in the display list to the corresponding line. If another file type is selected, this address can only display the selected line (read-only mode).
  * For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. They options of them will no longer be displayed in the record.
--* For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
++* For the details, please refer to "[[Recipe>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#H8.5Recipe]]".
  == **File list** ==
@@ -1146,7 +1146,7 @@
 . **Folder name:** This is located to recipe function setting.
 . **Select line:** Select one line in list and display its line No. in this address.
--      For example, set 40,
++      Forexample, set 40,
  * if 40=1, the first row of object is selected.
  * If 40=2, the second row of object is selected.
@@ -1168,7 +1168,7 @@
 . **Folder:** Set folder name, such as recipe.
 . **Select line: **Set address for select row.
--      For example, set 40,
++      Forexample, set 40,
  * if 40=1, the first row of object is selected.
  * If 40=2, the second row of object is selected.
@@ -1206,7 +1206,7 @@
  [[image:6.Objects_html_a68643b928e3930.gif||class="img-thumbnail"]]
  (% class="wikigeneratedid" %)
--✎**Note: **For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
++✎**Note: **For the details, please refer to "[[Recipe>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#H8.5Recipe]]".
  == **XY plot** ==
@@ -1234,7 +1234,7 @@
  Because if the number of XY points is m, it is necessary to continuously read 2m words from the address D of the PLC to draw a complete XY picture.
--**(2) Appearance**
++**(2) Apearrance**
  (% style="text-align:center" %)
  [[image:XY 2.png||class="img-thumbnail"]]
@@ -1242,8 +1242,8 @@
 . **X grids and Y grids:** The range is from 1 to 10.
 . **color setting:**
--* Background color 1 indicates the background color of appearrance.
--* Background color 2 indicates the background color of grid.
++* Backgroud color 1 indicates the background color of appearrance.
++* Backgroud color 2 indicates the background color of grid.
  **(3) Range**
@@ -1289,7 +1289,7 @@
  Because if the number of XY points is m, it is necessary to continuously read 2m words from the address D of the PLC to draw a complete XY picture.
--**(2) Appearance**
++**(2) Apearrance**
  (% style="text-align:center" %)
  [[image:XY 2.png||class="img-thumbnail"]]
@@ -1297,8 +1297,8 @@
 . **X grids and Y grids:** The range is from 1 to 10.
 . **color setting:**
--* Background color 1 indicates the background color of appearrance.
--* Background color 2 indicates the background color of grid.
++* Backgroud color 1 indicates the background color of appearrance.
++* Backgroud color 2 indicates the background color of grid.
  **(3) Range**
@@ -1319,7 +1319,7 @@
  ✎**Note:**
  (% class="wikigeneratedid" %)
--For the setting details, please refer to "[[History XY plot>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HHistoryXYplot]]".
++For the setting details, please refer to "[[History XY plot>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#H8.8HistoryXYPlot]]".
  == **Disc record chart** ==
@@ -1348,11 +1348,11 @@
  (% start="3" %)
 . **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed.After selecting the curve to be displayed, it can set the scale range and scale color of each curve.
--1. **Enable**: After selecting the corresponding curve number in the status bar and enable the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
++1. **Enable**: After seelecting the corresponding curve number in the status bar and enable the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
 . **Data Range: **Directly set the maximum and minimum values of the displayed graph. If the box "Variable Range" is checked, the set data is read from the filled address. The data format of the address is set as needed, and the length of the variable address is related to the set data format.
 . **Display Scale Value: **Display the value of disc record. The font color could be changed
--**(2) Appearance**
++**(2) Apearrance**
  (% style="text-align:center" %)
  [[image:6-3DiscRecordConfigAppearen.png||class="img-thumbnail"]]
@@ -1376,7 +1376,7 @@
  (% style="text-align:center" %)
  [[image:6-4DiscRecordConfigFuncAddr.png||class="img-thumbnail"]]
--**Function start Address**: Open the sub-screen of the data record query, and the system can automatically allocate the object address of the query screen according to the configured address. When using this component, it will automatically generate buttons for four direction, you can use these four control keys to view the data record display, and automatically create a new sub-screen based on the function start address, the content of the sub-screen is the query setting for span and start time.
++**Fucntion start Address**: Open the sub-screen of the data record query, and the system can automatically allocate the object address of the query screen according to the configured address. When using this component, it will automatically generate buttons for four direction, you can use these four control keys to view the data record display, and automatically create a new sub-screen based on the function start address, the content of the sub-screen is the query setting for span and start time.
  When two objects use one function screen at the same time, if the function addresses of the two object are the same, changing the built-in screen will affect the operation of the two display object at the same time. If the function addresses of the two objects are different, the second object with the built-in screen can be displayed normally, and the first object will be displayed abnormally.
  **✎Note: ** When copying Data record display, it is recommended to create a new "function screen" to avoid repeated calls that may cause abnormal functions.
@@ -1397,39 +1397,41 @@
  The meter responds to changes in the value of the indicated word address by means of a dial and a pointer. The meter looks very similar to the actual meter.
--(% style="text-align:center" %)
--[[image:image-20220805161001-1.jpeg]]
++**Description**
--**Read address:** Read the value from the set PLC address.
--**Data format:** It is for data setting. The data format types are as below.
++(% style="text-align:center" %)
++[[image:6.Objects_html_7b4e0390c9bae4fd.gif||class="img-thumbnail"]]
--* BCD, 32-bit float
--* signed decimal
--* unsigned decimal
--* 32-bit signed decimal
--* 32-bit unsigned decimal
++**(1) Basic**
--**Digits setting:** set directly the maximum and the minimum. Only when the floating point number is selected, can the the maximum and minimum value be with a decimal point, and other data format can't be with a decimal point. If the value is read by the address, then select "variable limits", and fill in the address.
++1. **Read address:** Read the value from the set PLC address.
++1. **Data format:** It is for data setting. The data format types are: BCD, 32-bit float, signed decimal, unsigned decimal, 32-bit signed decimal and 32-bit unsigned decimal.
++1. **Digits setting:** it means the decimal point position. the decimal point position is effective only when data format is floating and decimal.
++1. **Min angle and max angle:** Data range, if data beyond range will be not inputted.
++1. **Variable limits:** when checked, low limit address and high limit address could be edit showed below;
--* **Min angle and max angle:** Data range, if data beyond range will be not inputted.
++**(2) Show meter background**
--**Variable limits:** when checked, low limit address and high limit address could be edit showed below;
++This is for setting meter background, there are four types, you could select it according to needs.
--**Show meter background**: This is for setting meter background. When not checked, the background color is transparent; When checked, there are four styles of pointer meter to select it according to needs.
++**(3) Show pointer**
--**Show pointer**: When not checked, the pointer is not displayed; When checked, you could set the style and color of pointer.
++You could select show pointer or not according to need, and it provides two types for pointer and users could select pointer color.
--**Show alarm area**: It provides alarm function in meter, you could set the 4 areas, and each area corresponds to a different alarm color.
++**(4) Show alarm area**
--**Show scale**: Display the scale on the object to observe the value. You need to set major scale, minor scale and scale value.
++It provides alarm function in meter, users could set alarm range, users could set the 4 ranges. And each range corresponds to a different alarm color.
--**Meter Type:** It sets the angel between the maximum and minimum value. It provides 7 kinds of styles, they are 180°, 210°, 240°, 270°, 300°, 330° and 360°.
++**(5) Show scale**
--**Start angle: **It sets the position where the minimum value is displayed.
++It provides settings for scale on meter, users could select [Major scale] and [Minor scale], and set color for them.
--**Position&size:** Set the position of the object in the screen and the size of the object. The object is displayed as square. If the width or the height of the object is changed, the other data will also be changed.
++**(6) Meter angel settings**
++1. **Meter Type:** It sets the angel between the maximum and minimum value. It provides 7 kinds of styles, they are 180°, 210°, 240°, 270°, 300°, 330° and 360°.
++1. **Start angle: **It sets the position where the minimum value is displayed.
++
  **Result**
  When configuration is completed, the object is shown as below picture when HMI is running.
@@ -1438,10 +1438,7 @@
  [[image:6.Objects_html_1b8e24a5065cf96a.gif||class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
--✎**Note:** For the parameter setting, please refer to "[[text>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HText]]" in "[[Bit Switch>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
++✎**Note:** For the parameter setting, please refer to "[[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]" in "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
  == **Bar** ==
@@ -1512,7 +1512,7 @@
  == **Runbar** ==
--Run bar object could displays normal text and alarm text. User could select display content according to requirement.
++Run bar objectcould displays normal text and alarm text. User could select display content according to requirement.
  When the alarm text is displayed, it could quickly and timely reflect the status of the current HMI alarm function for easy management and control.
@@ -1541,7 +1541,7 @@
  **(2) Display content settings**
--* If it shows static text, please set content in "[[text>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HText]]".
++* If it shows static text, please set content in "[[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]".
  * If it shows dynamic text, please check [Read Address], and set address and length for it.
  * If it shows alarm text, please select alarm information, such as time and date, alarm group number range.
@@ -1573,7 +1573,7 @@
  == **Indirect window** ==
--Indirect window is used for displaying sub-screen in HMI project. You could control it to display different sub-screens by changing the value of read address.
++Indirect window is used for displaying sub-screen in HMI project. You could control it to display different sub-screens by chaninge the value of read address.
  **Description**
@@ -1666,52 +1666,47 @@
  ✎**Note:**
 . The image could be displayed in BMP, JPG, PNG, and JPEG formats. Images with a resolution of 1920 x 1080 or higher are not supported.
--1. For the setting of [[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
++1. For the setting of [[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
  == **Rotation picture** ==
  Rotation picture can rotate the image at a specified center or rotate it in a certain way. It is determined by the property settings.
++**Description**
++
  (% style="text-align:center" %)
--[[image:image-20220805155253-1.jpeg]]
++[[image:6.Objects_html_e43758e6e4e3e685.gif||class="img-thumbnail"]]
++**1) Counter-Clockwise**
--**Position: **Display the position of the rotation picture in the screen.
++It sets the rotation direction of the picture. The default is to rotate clockwise. When checked, the rotation direction is counterclockwise.
--**Counter-Clockwise: **It sets the rotation direction of the picture. The default is to rotate clockwise. When checked, the rotation direction is counterclockwise.
++**2) Appearance**
--**Appearance**: It sets picture for object, the picture is selected from Shape.
++It sets picture for object, the picture is selected from Shape.
--**Data format**
++**3) Data format**
  * **Data format: **It sets data format for [Address]->[Rotation angle].
--** BCD
--** 32-bit float
--** 16-bit signed decimal
--** 16-bit unsigned decimal
--** 32-bit signed decimal
--** 32-bit unsigned decimal
  * **Min. angle:** It sets the starting angle of rotation (Valid in auto-rotation mode).
  * **Max. angle:** It sets the ending angle of rotation (Valid in auto-rotation mode).
--**Rotation angle: **the rotating angle is determined by designated address;
++**4) Address**
--**Rotation center**: It shows the rotation center coordinates;
++**Rotation angle:**the rotating angle is determined by designated address; this mode and auto-rotation mode could not be used at the same time.
--**Auto-rotation: **Taker the center of the image as the center of the picture when it is rotating.
++**5) Rotation center**
--**Cycle time: **Object will rotate every cycle time. Unit:100 ms.
++It shows the rotation center coordinates;
--**Rotation angle:** Object rotates designated angle everytime.
++**6) Auto-rotation**
--**Return:** Object will be reset to original position after maximum angle reached.
++* **Cycle time: **Object will rotate every cycle time. Unit:100 ms.
++* **Rotation angle:** Object rotates designated angle everytime.
++* **Return:** Object will be reset to original position after maximum angle reached.
--**Enable auto-spin: **When the address is set to ON, the picture will rotate automatically.
++== **Drop-Down List** ==
--**Hide:** control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.
--
--== **Drop-down List** ==
--
  Drop-Down list is designed for display the designated state by text, to select the text in the list, the corresponding state will change, and the write address will change to the designated state value.
  The drop-down list could write word address, and the value range is 0 to 31. The corresponding value can be displayed by text in the object. Click the drop-down box on the right of the object to list all the status text, and the drop-down box will be automatically withdrawn after setting.
@@ -1757,7 +1757,7 @@
  **(2) Text settings**
--Every state requires text, the settings as below description, the normal settings please refer to [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__common setting__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCommonsettings]](%%). This section will show special settings for it.
++Every state requires text, the settings as below description, the normal settings please refer to [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__common setting section__>>path:#_Common_Settings]](%%). This section will show special settings for it.
  (% style="text-align:center" %)
  [[image:6.Objects_html_f35e2c650b2a4b90.gif||class="img-thumbnail"]]
@@ -1775,7 +1775,7 @@
 . **Current state: **It is for setting state number for modification. For example, if the value is 3, it means that the text information in state 3 will be modified.
 . **Text address: **This address is used for the operation of the text component and is used to input the content displayed in the state. The length of the text is the number of text characters that can be entered, ranging from 1-127 characters.
--1. **Trigger set text: **This address is used for saving modification.
++1. **Trigger set text: **This address is used for savingmodification.
  **3) Read state text from address**
@@ -1788,7 +1788,7 @@
  == **Camera display** ==
--Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Camera__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCameradisplay]](%%)].
++Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Camera__>>path:#_Camera]](%%)].
  **✎Note:**
@@ -1856,11 +1856,11 @@
  The current screenshots are only allowed on the SD card. When the SD card does not exist the system will cache the latest 10 screenshots.
--**Picture name: **The name of the image is controlled by the address.The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
++**Picture name: **The name of the image is controlled by the address.The length of the file name is limited to 64 words. If the image name address isnot set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
  **4) Global screenshot**
--If this function is enable, camera display object can perform the screenshot operation when HMI is running and save it as a .BMP image.
++If this function is enable, camera display objectcan perform the screenshot operation when HMI is running and save it as a .BMP image.
  If this function is disabled, camera display object only performs the screenshot operation when it is displayed on screen.
@@ -1874,19 +1874,22 @@
  **✎Note:**
--* When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
--* When HMI is displayed horizontally, the USB camera screen displays normally.If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
--* One HMI is only allowed to connect with one USB camera device. There is only one USB camera display part in the whole project screen, and the camera display part is not allowed to be placed on the public screen (1002: common Windows).
--* Sometimes the USB camera may lose the image because of the influence in the field, then we suggest to PI9000 HMI and the recommended USB camera model.
--* All below USB camera model have been tested by WECON to ensure the compatibility.
--* Currently, only PI8000 and PI9000 series support the USB camera function. Recommended USB cameras include:
--** REB-USB 100W07M (supports 720p)
--** WX152HD (supports 720p)
--** RMONCAM G200 (supports 720p)
--** ASHU S300 (640*480)
++1. When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
++1. When HMI is displayed horizontally, the USB camera screen displays normally.If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
++1. One HMI is only allowed to connect with one USB camera device. There is only one USB camera display part in the whole project screen, and the camera display part is not allowed to be placed on the public screen (1002: common Windows).
++1. Sometimes the USB camera may lose the image because of the influence in the field, then we suggest to PI9000 HMI and the recommended USB camera model.
++1. All below USB camera model have been tested by WECON to ensure the compatibility.
++1. (((
++Currently, only PI8000 and PI9000 series support the USB camera function. Recommended USB cameras include:
++)))
--== **Camera control** ==
++* REB-USB 100W07M (supports 720p)
++* WX152HD (supports 720p)
++* RMONCAM G200 (supports 720p)
++* ASHU S300 (640*480)
++== **Camera Control** ==
++
  **Introduction**
  This is for control camera; this object need to be used with camera display object.
@@ -1995,7 +1995,7 @@
  Valid when the save mode is selected, screenshot the content in printing object area and the save it in specified storage and folder, when trigger address turns ON.
--Folder: It's available to select SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
++Folder: It's availible to select SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
  **Related issues**
@@ -2298,7 +2298,7 @@
  It displays and sets the starting and ending angles of the arc.
--== **Broken line** ==
++== **Broken Line** ==
  The line segments are linked end-to-end to form a broken line, whose vertex coordinate can be modified by drafting, just like polygon.
@@ -2332,7 +2332,7 @@
  It is for preview object;
--== **Linear scale** ==
++== **Linear Scale** ==
  The linear scale is a linear scale that draws the specified area with a bisector. The specific scale of the scale can be marked with static text.
@@ -2352,7 +2352,7 @@
  It is for preview object;
--== **Arc scale** ==
++== **Arc Scale** ==
  It displays the scale within the specified arc area. The arc scale needs to specify a center coordinate. The inner and outer circles have two concentric circles that specify the scale length and the display area. The scale is distributed counterclockwise between the start angle and the end angle.
@@ -2380,7 +2380,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_b1535eb250d177d6.gif||class="img-thumbnail"]]
--== **Customized object** ==
++== **Customized Object** ==
  Customized object is provided for users to design the universal interface of object freely to meet customization requirements.

image-20220802113935-1.gif

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-29.7 KB

Content

image-20220805155253-1.jpeg

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-47.1 KB

Content

image-20220805161001-1.jpeg

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-51.3 KB

Content

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents