Skip to Content

Changes for page 05 Objects

Last modified by Hunter on 2026/07/14 14:46
From version 20.2
edited by Hunter
on 2026/07/14 13:57
Change comment: There is no comment for this version
To version 1.1
edited by Wecon
on 2025/09/03 21:03
Change comment: Imported from XAR

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Hunter
1 +XWiki.Wecon
Content
... ... @@ -32,13 +32,13 @@
32 32  
33 33  **Display**
34 34  
35 -* **Inverted Display: **Displays the object's state image and text in reverse state order.
35 +* **Inverted Display: **Display the state picture and text of the object reversely.
36 36  * **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
37 -* **Blink: **When enabled, the bit switch blinks when the specified condition is met;
38 -** **Blink when ON: **Blink the bit switch when control bit is ON.
39 -** **Blink when OFF: **Blink the bit switch when control bit is OFF.
37 +* **Blink: **Blinking while control bit is triggered;
38 +** **Blink when ON: **Blink when control bit is ON.
39 +** **Blink when OFF: **Blink when control bit is OFF.
40 40  
41 -**Minimum hold time: **Specifies the press-and-hold duration required for the action to take effect.
41 +**Minimum hold time: **Only when the time of press and hold the object is greater than the set value, the object function will be executed.
42 42  
43 43  **Indirect addressing:**
44 44  
... ... @@ -245,7 +245,7 @@
245 245  * **Decrease:** Decrease Operand value for each time the switch is triggered.
246 246  * **High/Low limit:** The value will be not able to change when the value reaches limits.
247 247  
248 -**Min.Hold Time: **Specifies the minimum interval between repeated triggers.
248 +**Min.Hold Time:**After continuously clicking the button for a period of time, the button will perform operations continuously
249 249  
250 250  (% class="box infomessage" %)
251 251  (((
... ... @@ -267,7 +267,7 @@
267 267  **Address**
268 268  
269 269  * **Read address:** Read the value from object display.
270 -* **States count: **Specifies the number of states for the specified word address, range: 1-256.
270 +* **States count: **Total status number for current word address, which could change the state value according to different status in button [State values], range: 1-256.
271 271  * **State with value out of range**: When the value of the read address is not on the range of states' value, it will cause no corresponding status number is displayed. There are two modes for process when the value is out of range.
272 272  * **Hide**: Hide the object when the value is out of range;
273 273  * **Show state**: Specify a status when the value is out of range, for example the total states is 6(range from state No.0~~No.5), but the read value is 6, at this moment the object will show the state No.0 if selected item of show state is No.0;
... ... @@ -286,15 +286,15 @@
286 286  **Transform state**
287 287  
288 288  * **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
289 -* **Auto transforms:** The lamp automatically switches between states.
289 +* **Auto transforms:** Object switch states automatically
290 290  
291 291  (% style="text-align:center" %)
292 292  [[image:6.Objects_html_b643c9a6a4bd6919.gif||class="img-thumbnail"]]
293 293  
294 -* **Trigger to transform: **Specifies the trigger condition for Auto Transform.
294 +* **Trigger to transform: **Trigger condition of auto transform
295 295  * **Auto return:** Return to the initial state after reaching the final state;
296 296  * **Time of transform:** Set the interval of transform between two states;
297 -* **Dynamic time: **Specifies the address used to control the automatic state switching interval. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
297 +* **Dynamic interval: **Set the dynamic interval of transform between two states. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
298 298  
299 299  **Manual**
300 300  
... ... @@ -301,11 +301,10 @@
301 301  (% style="text-align:center" %)
302 302  [[image:6.Objects_html_a8b6636bd862369c.gif||class="img-thumbnail"]]
303 303  
304 -* **State set: **Set state value to word address(according to the operate state selection) when click the lamp object.
304 +* **Set state: **Set a constant value to address(according to the operate state selection) when click the object.
305 305  * **State increase: **Increase the address value by one step when click the object, the upper limit is depends on the Last state selection.
306 306  * **State decrease:** Decrease the address value by one step when click the object, the lower limit is depends on the Last state selection..
307 -* **Last state: **The final state after the change;
308 -* **Return to state:** The word lamp returns to the selected state option when click the final state.
307 +* **Last state: **The upper limit or lower limit(Final state) of state increase/decrease;
309 309  
310 310  (% class="box infomessage" %)
311 311  (((
... ... @@ -339,8 +339,8 @@
339 339  (% style="text-align:center" %)
340 340  [[image:6.Objects_html_31c4ad387507a16d.gif||class="img-thumbnail"]]
341 341  
342 -* **Screen No: **The screen number to jump to, it could not be subscreen;
343 -* **Open sub screen: **The sub-screen number to pop up, default position is (0, 0), this is the coordinates of the top left corner of the screen;
341 +* **Screen No: **Switch to the selected screen, it could not be subscreen;
342 +* **Open sub screen: **Pop-up selected sub screen, and set sub screen position, default position is (0, 0), this is the coordinates of the top left corner of the screen;
344 344  
345 345  (% style="text-align:center" %)
346 346  [[image:6.Objects_html_8b9a9cc4cb589d5b.gif||class="img-thumbnail"]]
... ... @@ -629,7 +629,7 @@
629 629  * **Read Address:** The data from designated address will be displayed.
630 630  * **Input: **Enable input function and "Write Address" configuration.
631 631  * **Same read-write address:** Configure "Write Address" is the same as "Read Address".
632 -* **Read DWord: **Read one byte from each two-byte unit. For example, the string "abcd" is displayed as "ac".
631 +* **Read DWord: **Read the address data at double byte format.
633 633  * **Write address: **Write data to designated address. The address could be different "Read Address".
634 634  * **Keypad:** Built-in character keyboard input(Screen No.1001) could allow input a~~z, A~~Z, 0~~9.
635 635  * **Note**: After the keypad is opened, the content of note will be input into special register HUW1402. The maximum length allowed for the note is 63 characters.
... ... @@ -982,7 +982,7 @@
982 982  ✎**Note: **The objects sunch as tables and trends charts are only support **"**song typeface". It is invalid if you set other fonts.
983 983  )))
984 984  
985 -This object only displays content normally after the "[[__Data record__>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HDatarecord]]" function is set.
984 +This object only displays content normally after the "[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Data record__>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HDatarecord]](%%)" function is set.
986 986  
987 987  (% style="text-align:center" %)
988 988  [[image:6.Objects_html_2ee00a2b90c062f6.gif||class="img-thumbnail"]]
... ... @@ -1409,7 +1409,7 @@
1409 1409  
1410 1410  (% class="box infomessage" %)
1411 1411  (((
1412 -Only ig series HMI and R series V-box have this function.
1411 +Only ig series have this function.
1413 1413  )))
1414 1414  
1415 1415  The recipe record display component displays recipe data in a table format and can perform operations such as adding, deleting, modifying, uploading, downloading, importing and exporting the recipe.
... ... @@ -1433,89 +1433,11 @@
1433 1433  
1434 1434  **④**Choose the recipe file in recipe folder
1435 1435  
1436 -== **New Alarm record** ==
1435 +
1437 1437  
1438 -**Introduction:** Query all alarm records for a specific group number and display them in a table format in chronological order. The query time period can be dynamically set on HMI, and the display is saved after power-off.
1437 += **Meter** =
1439 1439  
1440 -(% class="box infomessage" %)
1441 -(((
1442 -Note:
1443 -1.Alarm Record in versions **10.0** and above are referred to as the "New Alarm Record," while those in versions below 10.0 are referred to as the "Old Alarm Record."
1444 -2.Differences between New Alarm Record and Old Alarm Record:
1445 -① Clearer page configuration, divided into three main pages: "Basic," "Graphics," and "Alarm Properties."
1446 -② Appearance settings offer more style settings.
1447 -③ Added alarm property settings, allowing to change the color when confirming.
1448 -④ The ability to configure function addresses and query time periods in the project configuration has been removed. Instead, directly query and filter time periods and group numbers at runtime.
1449 -⑤Added horizontal and vertical scroll bars for easier screen navigation.
1450 -)))
1451 -
1452 -**General:**
1453 -
1454 -**1.Alarm Type :** There are three alarm modes including Current alarm record, History alarm record and Alarm event statistics.
1455 -
1456 -**(1) Current alarm records:** Only the current alarm record will be displayed. If the alarm is triggered, the record will disappear.
1457 -
1458 -**(2) Historical alarm records: **All alarm and alarm trigger records will be displayed one by one.
1459 -
1460 -**(3) Alarm event statistics:** Only one record for the same alarm address will be displayed.
1461 -
1462 -**2.Group number range**: The group number range of the alarm records to be displayed. Alarm records that are not in this range will not be displayed.
1463 -
1464 -**3.Time setting**: Select the display format of time and date.
1465 -
1466 -
1467 1467  (% style="text-align:center" %)
1468 -[[image:屏幕截图 2025-09-05 164650.png]]
1469 -
1470 -**Graphic:**
1471 -
1472 -**1.Style Selection:** Select a system-provided style from the Style Selection menu, or select "Custom" to customize the colors.
1473 -
1474 -(% class="box infomessage" %)
1475 -(((
1476 -Note: If select a system-provided style, the table color can not be changed.
1477 -)))
1478 -
1479 -**2.Cell format:** Includes two options: "Adaptive" and "Custom"
1480 -
1481 -**①Adaptive:** Cells automatically adjust size based on text length.
1482 -
1483 -**②Custom: **Manually set column widths and row heights for all cells.
1484 -
1485 -(% style="text-align:center" %)
1486 -[[image:屏幕截图 2025-09-05 164729.png]]
1487 -
1488 -**Alaem Properties**
1489 -
1490 -**1.Alarm Display Status**
1491 -
1492 -**(1) Confirm:** Set the text and background color for confirming an alarm record.
1493 -
1494 -(% class="box infomessage" %)
1495 -(((
1496 -Note: "Confirm" must be selected for the alarm to display successfully.
1497 -)))
1498 -
1499 -**(2)Back to normal:** Set the text and background color for the record when the alarm record returns to normal.
1500 -
1501 -**2. Sorting**
1502 -
1503 -**(1)Method:** Indicates the field to sort by. The default is time.
1504 -
1505 -**(2) Order:** Indicates the order to sort by. The default is descending order.
1506 -
1507 -**(3) Confirm: **Sets the method for confirming an alarm record and the write address.
1508 -
1509 -**① Confirmation Method: **The method for confirming an alarm record. There are three methods including single-click, double-click, and long press for 3 seconds. The default is single-click.
1510 -
1511 -**②Write Address:** The write address to be written during confirmation. Confirming will reset the contents of the write address to 0.
1512 -
1513 -(% style="text-align:center" %)
1514 -[[image:123.png]]
1515 -
1516 -== **Meter** ==
1517 -
1518 -(% style="text-align:center" %)
1519 1519  [[image:1733370883635-566.png]]
1520 1520  
1521 1521  == **Pointer meter** ==
... ... @@ -1926,7 +1926,7 @@
1926 1926  
1927 1927  **(2) Text settings**
1928 1928  
1929 -Every state requires text, the settings as below description, the normal settings please refer to [[__common setting__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCommonsettings]]. This section will show special settings for it.
1850 +Every state requires text, the settings as below description, the normal settings please refer to [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__common setting__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCommonsettings]](%%). This section will show special settings for it.
1930 1930  
1931 1931  (% style="text-align:center" %)
1932 1932  [[image:6.Objects_html_f35e2c650b2a4b90.gif||class="img-thumbnail"]]
... ... @@ -1957,7 +1957,7 @@
1957 1957  
1958 1958  == **Camera display** ==
1959 1959  
1960 -Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[__Camera__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCameradisplay]]].
1881 +Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Camera__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCameradisplay]](%%)].
1961 1961  
1962 1962  (% class="box infomessage" %)
1963 1963  (((
... ... @@ -2109,6 +2109,8 @@
2109 2109  If the "Camera Search Module" is not enabled, you need to enter the camera information manually: user name, password, device serial number (S/N), which can be obtained from the label on the camera body. 
2110 2110  )))
2111 2111  
2033 +(% style="text-align:center" %)
2034 +[[image:图片1.png]]
2112 2112  
2113 2113  
2114 2114  * (((
... ... @@ -2749,157 +2749,6 @@
2749 2749   ✎Note: When this component is in the sub-screen, closing the sub-screen may cause the HMI to freeze. Before the problem is fixed, do not put PDF Reader in the sub-screen.
2750 2750  )))
2751 2751  
2752 -== **Media Player** ==
2753 -
2754 -=== **Configuration** ===
2755 -
2756 -Play videos from U Disk drive or SD card.
2757 -
2758 -**Model restriction: **8000ig, RH and 9000ig
2759 -
2760 -(% style="text-align:center" %)
2761 -[[image:图片1.png]]
2762 -
2763 -**File path:**
2764 -
2765 -There are two optional file path, U Disk and SD card.
2766 -
2767 -**Folder name:** The name of a file storing videos.
2768 -
2769 -**Screenshot folder: **The name of a file storing screenshot of video.
2770 -
2771 -**Use folder variable: **Use specified address to type the name of folder and screenshot.
2772 -
2773 -(% style="text-align:center" %)
2774 -[[image:图片2.png]]
2775 -
2776 -
2777 -**Recovery mode:**
2778 -
2779 -**Replay:** Start the video from the beginning.
2780 -
2781 -**Resume playback position:** After power-off or exit, resume playback from the last interruption position when restarting.
2782 -
2783 -(% style="text-align:center" %)
2784 -[[image:图片3.png]]
2785 -
2786 -
2787 -**Cycle Mode: **Content playback methods for different scenarios
2788 -
2789 -**(1) No loop: **The video playback is executed only once and stops automatically after it ends.
2790 -
2791 -**(2) Single Track Loop:** A single video plays repeatedly, never stopping.
2792 -
2793 -**(3) Playlist loop: **Videos are played in a fixed order in the file
2794 -
2795 -**(4) Random loop: **Videos are played in a random order in the file
2796 -
2797 -(% style="text-align:center" %)
2798 -[[image:图片4.png]]
2799 -
2800 -**Control mode:**
2801 -
2802 -**Disable control: **There is no operation button, and the playback status cannot be manually controlled. The system automatically plays the list file until the end.
2803 -
2804 -**System interface control:** Provides user interface buttons, mutually exclusive with address control.
2805 -
2806 -**Address control:** Use specified address to Implement video control function.
2807 -
2808 -(% style="text-align:center" %)
2809 -[[image:图片5.png]]
2810 -
2811 -**Preview:**
2812 -
2813 -**Load video: **Load a video and preview the video playback effect before downloading HMI project.
2814 -
2815 -(% style="text-align:center" %)
2816 -[[image:图片6.png]]
2817 -
2818 -=== **Function button** ===
2819 -
2820 -[[image:图片8.png]] : Play
2821 -
2822 -[[image:图片9.png]] : Pause
2823 -
2824 -[[image:图片10.png]] : Stop
2825 -
2826 -[[image:图片11.png]] : Replay
2827 -
2828 -[[image:图片12.png]] : Previous
2829 -
2830 -[[image:图片13.png]] : Next
2831 -
2832 -[[image:图片14.png]] : Fast rewind
2833 -
2834 -[[image:图片15.png]] : Fast forward
2835 -
2836 -[[image:图片16.png]] : Screenshot
2837 -
2838 -[[image:图片17.png]] : Full screen
2839 -
2840 -[[image:图片18.png]] : Exit full screen
2841 -
2842 -**Cycle mode:**
2843 -
2844 -[[image:图片19.png]] : No loop
2845 -
2846 -[[image:图片20.png]] : Single Track loop
2847 -
2848 -[[image:图片21.png]] : Playlist loop
2849 -
2850 -[[image:图片22.png]] : Random loop
2851 -
2852 -**Window:**
2853 -
2854 -[[image:图片23.png]] : Minimalist mode switch
2855 -
2856 -[[image:图片24.png]]: Minimalist mode switch
2857 -
2858 -=== **Playback address control function** ===
2859 -
2860 -|**Operation**|**Command**|**Parameter 1**|**Description**
2861 -|**Play/Pause**|1|N/A|(((
2862 -**Address mode control.**
2863 -
2864 -Play status address will be **16** during **playing**.
2865 -
2866 -Play status address will be **256 **during **Pause**.
2867 -)))
2868 -|**Replay**|2|N/A|
2869 -|**Stop and close file**|3|N/A|Play status address will be **4096** during **Stop**.
2870 -|**Play previous video**|4|N/A|(((
2871 -1.If File index is originally 0, the video will be played again.
2872 -
2873 -2.If file cannot be found, Play status address will be 8.
2874 -)))
2875 -|**Play next video**|5|N/A|(((
2876 -1.If the next file cannot be found, the first video in the list (file index 0) will be played.
2877 -
2878 -2.If the file cannot be found, the Plays tatus address will be 8.
2879 -)))
2880 -|Fast rewind|6|Specified number of seconds|(((
2881 -1.Rewind the video by the specified number of seconds from the current time and start playing again.
2882 -
2883 -2.If the video is currently paused, this operation will cause it to remain paused.
2884 -
2885 -3.If the specified time is less than the start time, the video will restart playing.
2886 -)))
2887 -|**Fast forward**|7|Specified number of seconds|(((
2888 -1.Fast-forward the specified number of seconds from the current time and start playback.
2889 -
2890 -2.If the video is currently paused, this operation will cause it to remain paused.
2891 -
2892 -3.If the specified time exceeds the end time, the video will end immediately.
2893 -)))
2894 -|**Volume**|8|(((
2895 -Specified volume
2896 -
2897 -(0-50)
2898 -)))|Default volume is** 50.**
2899 -|**Start time**|9|Specified position (Unit: s)|The specified position should be less than the end time. If it exceeds the end time, the system will end the video directly.
2900 -|**Play index file**|10|File index|The files will be sorted by name. The file index is 0, pointing to the first file, and so on. If the file cannot be found, Play status address will be 8.
2901 -|**Update playback time**| |N/A|Video will be played and the current playback progress (in seconds) will be updated in real time according to the set update cycle.
2902 -
2903 2903  = **Draw** =
2904 2904  
2905 2905  It provides function of drawing graphics, setting text, displaying pictures, this part contains Text, Line, Polygon, Cycle, Arc, Rectangle, Broken Line, Linear Scale, Arc scale, Table.
123.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -22.1 KB
Content
图片1.png
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.joe
1 +XWiki.Wecon
Size
... ... @@ -1,1 +1,1 @@
1 -85.5 KB
1 +307.4 KB
Content
图片10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -262 bytes
Content
图片11.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 KB
Content
图片12.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -689 bytes
Content
图片13.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -892 bytes
Content
图片14.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -792 bytes
Content
图片15.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -810 bytes
Content
图片16.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -1.6 KB
Content
图片17.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -744 bytes
Content
图片18.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -761 bytes
Content
图片19.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -806 bytes
Content
图片2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -28.7 KB
Content
图片20.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -817 bytes
Content
图片21.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -853 bytes
Content
图片22.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 KB
Content
图片23.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 KB
Content
图片24.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 KB
Content
图片3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -62.6 KB
Content
图片4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -2.4 KB
Content
图片5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -47.3 KB
Content
图片6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -14.1 KB
Content
图片8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -1.6 KB
Content
图片9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -1.3 KB
Content
屏幕截图 2025-09-05 164650.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
屏幕截图 2025-09-05 164729.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.joe
Size
... ... @@ -1,1 +1,0 @@
1 -65.4 KB
Content