Changes for page 05 Objects

Last modified by Hunter on 2026/07/14 14:46

From 6.1 to 5.1

From version 21.1

edited by Hunter
on 2026/07/14 14:46

Change comment: There is no comment for this version

To version 6.1

edited by Joe
on 2025/09/05 16:10

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (2 modified, 0 added, 3 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Hunter
++XWiki.joe

Content

@@ -32,13 +32,13 @@
  **Display**
--* **Inverted Display: **Displays the object's state image and text in reverse state order.
++* **Inverted Display: **Display the state picture and text of the object reversely.
  * **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
--* **Blink: **When enabled, the bit switch blinks when the specified condition is met;
--** **Blink when ON: **Blink the bit switch when control bit is ON.
--** **Blink when OFF: **Blink the bit switch when control bit is OFF.
++* **Blink: **Blinking while control bit is triggered;
++** **Blink when ON: **Blink when control bit is ON.
++** **Blink when OFF: **Blink when control bit is OFF.
--**Minimum hold time: **Specifies the press-and-hold duration required for the action to take effect.
++**Minimum hold time: **Only when the time of press and hold the object is greater than the set value, the object function will be executed.
  **Indirect addressing:**
@@ -245,7 +245,7 @@
  * **Decrease:** Decrease Operand value for each time the switch is triggered.
  * **High/Low limit:** The value will be not able to change when the value reaches limits.
--**Min.Hold Time: **Specifies the minimum interval between repeated triggers.
++**Min.Hold Time:**After continuously clicking the button for a period of time, the button will perform operations continuously
  (% class="box infomessage" %)
  (((
@@ -267,7 +267,7 @@
  **Address**
  * **Read address:** Read the value from object display.
--* **States count: **Specifies the number of states for the specified word address, range: 1-256.
++* **States count: **Total status number for current word address, which could change the state value according to different status in button [State values], range: 1-256.
  * **State with value out of range**: When the value of the read address is not on the range of states' value, it will cause no corresponding status number is displayed. There are two modes for process when the value is out of range.
  * **Hide**: Hide the object when the value is out of range;
  * **Show state**: Specify a status when the value is out of range, for example the total states is 6(range from state No.0~~No.5), but the read value is 6, at this moment the object will show the state No.0 if selected item of show state is No.0;
@@ -286,15 +286,15 @@
  **Transform state**
  * **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
--* **Auto transforms:** The lamp automatically switches between states.
++* **Auto transforms:** Object switch states automatically
  (% style="text-align:center" %)
  [[image:6.Objects_html_b643c9a6a4bd6919.gif||class="img-thumbnail"]]
--* **Trigger to transform: **Specifies the trigger condition for Auto Transform.
++* **Trigger to transform: **Trigger condition of auto transform
  * **Auto return:** Return to the initial state after reaching the final state;
  * **Time of transform:** Set the interval of transform between two states;
--* **Dynamic time: **Specifies the address used to control the automatic state switching interval. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
++* **Dynamic interval: **Set the dynamic interval of transform between two states. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
  **Manual**
@@ -301,11 +301,10 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_a8b6636bd862369c.gif||class="img-thumbnail"]]
--* **State set: **Set state value to word address(according to the operate state selection) when click the lamp object.
++* **Set state: **Set a constant value to address(according to the operate state selection) when click the object.
  * **State increase: **Increase the address value by one step when click the object, the upper limit is depends on the Last state selection.
  * **State decrease:** Decrease the address value by one step when click the object, the lower limit is depends on the Last state selection..
--* **Last state: **The final state after the change;
--* **Return to state:** The word lamp returns to the selected state option when click the final state.
++* **Last state: **The upper limit or lower limit(Final state) of state increase/decrease;
  (% class="box infomessage" %)
  (((
@@ -339,8 +339,8 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_31c4ad387507a16d.gif||class="img-thumbnail"]]
--* **Screen No: **The screen number to jump to, it could not be subscreen;
--* **Open sub screen: **The sub-screen number to pop up, default position is (0, 0), this is the coordinates of the top left corner of the screen;
++* **Screen No: **Switch to the selected screen, it could not be subscreen;
++* **Open sub screen: **Pop-up selected sub screen, and set sub screen position, default position is (0, 0), this is the coordinates of the top left corner of the screen;
  (% style="text-align:center" %)
  [[image:6.Objects_html_8b9a9cc4cb589d5b.gif||class="img-thumbnail"]]
@@ -629,7 +629,7 @@
  * **Read Address:** The data from designated address will be displayed.
  * **Input: **Enable input function and "Write Address" configuration.
  * **Same read-write address:** Configure "Write Address" is the same as "Read Address".
--* **Read DWord: **Read one byte from each two-byte unit. For example, the string "abcd" is displayed as "ac".
++* **Read DWord: **Read the address data at double byte format.
  * **Write address: **Write data to designated address. The address could be different "Read Address".
  * **Keypad:** Built-in character keyboard input(Screen No.1001) could allow input a~~z, A~~Z, 0~~9.
  * **Note**: After the keypad is opened, the content of note will be input into special register HUW1402. The maximum length allowed for the note is 63 characters.
@@ -649,9 +649,9 @@
  * **Center:** data display on the center of object.
  * **Align left: **data display on the left.
  * **Align right: **data display on the right.
--* **Exchange high-low byte: **Swap the high and low bytes before displaying the data. For example, the string "abcd" is displayed as "badc". If the number of characters is not a multiple of 2, the last character is hidden after swapping.
++* **Exchange high-low byte: **Swap the contents of high byte and low byte then display. High byte data into low byte position, low byte data into high byte position. If the length of characters is not a multiple of 2, it will exchange after rounded.
  * **Length: **The length of characters, the maximum length is 256.
--* **Exchange high-low word: **Swap the high and low words before displaying the data. For example, the string "abcd" is displayed as "cdab". If the number of characters is not a multiple of 2, the last character is hidden after swapping.
++* **Exchange high-low word: **Swap the contents of high word and low word then display. Only valid when the length of characters is a multiple of 4.
  **Keypad position**
@@ -1409,7 +1409,7 @@
  (% class="box infomessage" %)
  (((
--Only ig series HMI and R series V-box have this function.
++Only ig series have this function.
  )))
  The recipe record display component displays recipe data in a table format and can perform operations such as adding, deleting, modifying, uploading, downloading, importing and exporting the recipe.
@@ -1433,89 +1433,10 @@
  **④**Choose the recipe file in recipe folder
--== **New Alarm record** ==
--**Introduction:** Query all alarm records for a specific group number and display them in a table format in chronological order. The query time period can be dynamically set on HMI, and the display is saved after power-off.
++= **Meter** =
--(% class="box infomessage" %)
--(((
--Note:
--1.Alarm Record in versions **10.0** and above are referred to as the "New Alarm Record," while those in versions below 10.0 are referred to as the "Old Alarm Record."
--2.Differences between New Alarm Record and Old Alarm Record:
--① Clearer page configuration, divided into three main pages: "Basic," "Graphics," and "Alarm Properties."
--② Appearance settings offer more style settings.
--③ Added alarm property settings, allowing to change the color when confirming.
--④ The ability to configure function addresses and query time periods in the project configuration has been removed. Instead, directly query and filter time periods and group numbers at runtime.
--⑤Added horizontal and vertical scroll bars for easier screen navigation.
--)))
--
--**General:**
--
--**1.Alarm Type :** There are three alarm modes including Current alarm record, History alarm record and Alarm event statistics.
--
--**(1) Current alarm records:** Only the current alarm record will be displayed. If the alarm is triggered, the record will disappear.
--
--**(2) Historical alarm records: **All alarm and alarm trigger records will be displayed one by one.
--
--**(3) Alarm event statistics:** Only one record for the same alarm address will be displayed.
--
--**2.Group number range**: The group number range of the alarm records to be displayed. Alarm records that are not in this range will not be displayed.
--
--**3.Time setting**: Select the display format of time and date.
--
--
  (% style="text-align:center" %)
--[[image:屏幕截图 2025-09-05 164650.png]]
--
--**Graphic:**
--
--**1.Style Selection:** Select a system-provided style from the Style Selection menu, or select "Custom" to customize the colors.
--
--(% class="box infomessage" %)
--(((
--Note: If select a system-provided style, the table color can not be changed.
--)))
--
--**2.Cell format:** Includes two options: "Adaptive" and "Custom"
--
--**①Adaptive:** Cells automatically adjust size based on text length.
--
--**②Custom: **Manually set column widths and row heights for all cells.
--
--(% style="text-align:center" %)
--[[image:屏幕截图 2025-09-05 164729.png]]
--
--**Alaem Properties**
--
--**1.Alarm Display Status**
--
--**(1) Confirm:** Set the text and background color for confirming an alarm record.
--
--(% class="box infomessage" %)
--(((
--Note: "Confirm" must be selected for the alarm to display successfully.
--)))
--
--**(2)Back to normal:** Set the text and background color for the record when the alarm record returns to normal.
--
--**2. Sorting**
--
--**(1)Method:** Indicates the field to sort by. The default is time.
--
--**(2) Order:** Indicates the order to sort by. The default is descending order.
--
--**(3) Confirm: **Sets the method for confirming an alarm record and the write address.
--
--**① Confirmation Method: **The method for confirming an alarm record. There are three methods including single-click, double-click, and long press for 3 seconds. The default is single-click.
--
--**②Write Address:** The write address to be written during confirmation. Confirming will reset the contents of the write address to 0.
--
--(% style="text-align:center" %)
--[[image:123.png]]
--
--== **Meter** ==
--
--(% style="text-align:center" %)
  [[image:1733370883635-566.png]]
  == **Pointer meter** ==
@@ -2109,6 +2109,8 @@
  If the "Camera Search Module" is not enabled, you need to enter the camera information manually: user name, password, device serial number (S/N), which can be obtained from the label on the camera body.
  )))
++(% style="text-align:center" %)
++[[image:图片1.png]]
  * (((
@@ -2855,8 +2855,10 @@
  [[image:图片24.png]]: Minimalist mode switch
++
  === **Playback address control function** ===
++
  |**Operation**|**Command**|**Parameter 1**|**Description**
  |**Play/Pause**|1|N/A|(((
  **Address mode control.**
@@ -2895,7 +2895,7 @@
  Specified volume
  (0-50)
--)))|Default volume is** 50.**
++)))|Default volume is** 50.**
  |**Start time**|9|Specified position (Unit: s)|The specified position should be less than the end time. If it exceeds the end time, the system will end the video directly.
  |**Play index file**|10|File index|The files will be sorted by name. The file index is 0, pointing to the first file, and so on. If the file cannot be found, Play status address will be 8.
  |**Update playback time**| |N/A|Video will be played and the current playback progress (in seconds) will be updated in real time according to the set update cycle.

123.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.joe

Size

...	...	@@ -1,1 +1,0 @@
1		-22.1 KB

Content

图片2.png

Size

@@ -1,1 +1,1 @@
--28.7 KB
++17.1 KB

Content

图片3.png

Size

@@ -1,1 +1,1 @@
--62.6 KB
++1.7 KB

Content

屏幕截图 2025-09-05 164650.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.joe

Size

...	...	@@ -1,1 +1,0 @@
1		-22.7 KB

Content

屏幕截图 2025-09-05 164729.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.joe

Size

...	...	@@ -1,1 +1,0 @@
1		-65.4 KB

Content

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents