Skip to Content

Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41
From version 36.1
edited by Karen
on 2023/05/23 16:21
Change comment: There is no comment for this version
To version 30.3
edited by Hunter
on 2023/01/09 15:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Karen
1 +XWiki.Hunter
Content
... ... @@ -25,13 +25,13 @@
25 25  * **Set OFF:** set off the write address.
26 26  * **Set ON:** set on the write address.
27 27  * **Momentary:** set on the write address when switch is pressed, and set off when switch is released.
28 -* **Delay:** set off the write address after a delay. (for example: assign the delay time as 5, write address will be set off after releasing 5 ms.)
28 +* **Delay:** set off the write address after a delay. (for example: assign the delay time as 5, write address will be set off after released 5 ms.)
29 29  * **Switch:** switch between 0 and 1 each time the switch is triggered.
30 30  
31 31  **Display**
32 32  
33 33  * **Inverted Display: **Display the state picture and text of the object reversely.
34 -* **Quick Read: **The speed of configuring the object is priority to other objects.
34 +* **Quick Read: **The speed of configuring the object is prority to other objects.
35 35  
36 36  **Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;
37 37  
... ... @@ -44,11 +44,11 @@
44 44  
45 45  * **Read address**: Use the value of the read address to determine the address A after deviation, and use the address A as the read address of the object.
46 46  
47 -**For example:**: HDX11.0 is the read address of the object. The three indirect read address is D0, E1, and HDW2. The system would read the value of address HDW2.
47 +**For example:**: HDX11.0 is the read address of the object. The three indirect read address is D0, E1 and HDW2. The system would read the value of address HDW2.
48 48  
49 -If its value is 22, and the second indirect read address E1 would update to E23, then the system would read the value of E23.
49 +If its value is 22, and the second indrect read address E1 would update to E23, then the system would read the value of E23.
50 50  
51 -If its value is 33, then the first indirect read address D0 would update to D33, then the value of D33 is 44, that is, the bit of deviation is 44 bits.
51 +If its value is 33, then the fisrt indrect read address D0 would update to D33, then the value of D33 is 44, that is, the bit of deviation is 44 bits.
52 52  
53 53  A word has 16 bits, divide 16 into 44, and the answer is 2, remainder 12. Therefore, the read address of object is update from HDX11.0 to HDX13.12, and the final read address is HDX13.12.
54 54  
... ... @@ -59,7 +59,7 @@
59 59  (% style="text-align:center" %)
60 60  [[image:位开关 2.png||class="img-thumbnail"]]
61 61  
62 -**All languages: **Edit the texts of all the languages of the object in a time. A maximum of 8 languages are supported.
62 +**All languages: **Edit the texts of all the languages of the object in a time. A maximum of 8 languages supported.
63 63  
64 64  (% style="text-align:center" %)
65 65  [[image:6.Objects_html_fd7dea026037c591.gif||class="img-thumbnail"]]
... ... @@ -90,15 +90,15 @@
90 90  
91 91  **Object lock**
92 92  
93 -* **Lock address: **Using interlock address, address 0 means that the object would be locked and display a lock icon. Only when the interlock-bit address points to 1 will the bit switch be operated.
93 +* **Lock address: **Using interlock address, address 0 means that the object would be locked and display a lock icon. Only when the interlock - bit address points to 1 will the bit switch be operated.
94 94  * **Hide "lock" icon: **If don't want to display the icon, you may check it. will be "no show" lock "icon" tick.
95 95  * **Lock when "ON":** check it and the bit address will be locked when the interlock address is set to 1.
96 96  
97 -**Touch available: **If you check it, you could operate the object when you touch it.
97 +**Touch available: **If you check it, you could oeprate the object when you touch it.
98 98  
99 99  **Enable beep: **If you check it, the object will beep when you touch it.
100 100  
101 -**Extended trigger functions. **It is only valid for PLC address.
101 +**Extended trigger funtions. **It is only valid for PLC address.
102 102  
103 103  (% style="text-align:center" %)
104 104  [[image:位开关 6.png||class="img-thumbnail"]]
... ... @@ -110,8 +110,8 @@
110 110  * **Pop login screen**
111 111  ** Every time: Userlogin screen will pop-up when user permissions are insufficient;
112 112  ** When change user: Userlogin screen will pop-up when user permissions, and if users logged in successfully, the previous users will log out.
113 -** Pop once: Userlogin screen will pop-up when user permissions are insufficient, but when user enter the right password, this object can be operated by anyone.
114 -* **Hide object: **When the user has no permission, the object is hidden. When the user has permission, the object is displayed and can be operated.
113 +** Pop once: userlogin screen will pop-up when user permissions are insufficient, but when user enter the right password, this object can be operated by anyone.
114 +* **Hide object: **When the user has no permission, the object is hided. When the user has the permission, the object is displayed and can be operated.
115 115  
116 116  === Animation ===
117 117  
... ... @@ -130,7 +130,7 @@
130 130  
131 131  For example: If the proportional gain value is x and the moving or scaling value is y, then the actual moving or scaling value is (x*y).
132 132  
133 -**Movement**
133 +**(Movement**
134 134  
135 135  The function of [Movement] is to move the position of object on the screen according to the value of address and movement type.
136 136  
... ... @@ -146,7 +146,7 @@
146 146  
147 147  **Deform**
148 148  
149 -Deform object display size on screen mainly depends on width and height.
149 +Deform object display size on screen, mainly depends on width and height.
150 150  
151 151  Deform type: left, right, up, down, left and right, up and down, right/left and up/down, right/left or up/down.
152 152  
... ... @@ -162,7 +162,7 @@
162 162  |(% style="width:207px" %)PLC address/station NO.|(% style="width:868px" %)Set the device station NO. to access. If default station NO. is selected, then the station NO. is the de  The station number is the default station number for "Connection"  settings in "System Parameters".
163 163  |(% style="width:207px" %)User input|(% style="width:868px" %)The address is not from address library, but a string.
164 164  |(% style="width:207px" %)From address Library|(% style="width:868px" %)The address is selected from address library. If there is no data in address library, it is invalid.
165 -|(% style="width:207px" %)System address|(% style="width:868px" %)Display all the items of address library. The current one is the address referenced by the object.
165 +|(% style="width:207px" %)System address|(% style="width:868px" %)Display all the items of address library. The currently one is the address referenced by the object.
166 166  |(% style="width:207px" %)Connection|(% style="width:868px" %)PLC that already exists in the project.
167 167  |(% style="width:207px" %)Address type|(% style="width:868px" %)The address type or internal register type included in the PLC selected by the project.
168 168  |(% style="width:207px" %)Address NO.|(% style="width:868px" %)To input address NO.
... ... @@ -725,44 +725,20 @@
725 725  HDW12
726 726  
727 727  (Bit address control up and down left and right display)
728 -)))|(% style="width:113px" %)HDW12.0|(% colspan="2" style="width:528px" %)(((
729 -Table type object: Move one page up
730 -
731 -History Trend Chart: Pop up query settings window
732 -)))
733 -|(% style="width:113px" %)HDW12.1|(% colspan="2" style="width:528px" %)(((
734 -Table type object: Move one row up
735 -
736 -History Trend Chart: Move one span down
737 -)))
738 -|(% style="width:113px" %)HDW12.2|(% colspan="2" style="width:528px" %)(((
739 -Table type object: Move one page down
740 -
741 -History Trend Chart: Move one span up
742 -)))
743 -|(% style="width:113px" %)HDW12.3|(% colspan="2" style="width:528px" %)(((
744 -Table type object: Move one row down
745 -
746 -History Trend Chart: Display/Hide slide bar
747 -)))
748 -|(% style="width:113px" %)HDW12.4|(% colspan="2" style="width:528px" %)(((
749 -Table type object: Move one page left
750 -
751 -History Trend Chart: Zoom in (Narrow time span down)
752 -)))
753 -|(% style="width:113px" %)HDW12.5|(% colspan="2" style="width:528px" %)(((
754 -Table type object: Move one column left
755 -
756 -History Trend Chart: Zoom out (Broaden time span up)
757 -)))
758 -|(% style="width:113px" %)HDW12.6|(% colspan="2" style="width:528px" %)Table type object: Move one page right
759 -|(% style="width:113px" %)HDW12.7|(% colspan="2" style="width:528px" %)Table type object: Move one column right
728 +)))|(% style="width:113px" %)HDW12.0|(% colspan="2" style="width:528px" %)Move one page up
729 +|(% style="width:113px" %)HDW12.1|(% colspan="2" style="width:528px" %)Move one row up
730 +|(% style="width:113px" %)HDW12.2|(% colspan="2" style="width:528px" %)Move one page down
731 +|(% style="width:113px" %)HDW12.3|(% colspan="2" style="width:528px" %)Move one row down
732 +|(% style="width:113px" %)HDW12.4|(% colspan="2" style="width:528px" %)Move one page left
733 +|(% style="width:113px" %)HDW12.5|(% colspan="2" style="width:528px" %)Move one column left
734 +|(% style="width:113px" %)HDW12.6|(% colspan="2" style="width:528px" %)Move one page right
735 +|(% style="width:113px" %)HDW12.7|(% colspan="2" style="width:528px" %)Move one column right
760 760  |(% style="width:277px" %)HDX13.0|(% style="width:113px" %)Bit|(% colspan="2" style="width:528px" %)(((
761 761  Span Method：
762 762  
763 763  ~=0: Use the Span Value and Span Unit to query;
764 764  
765 -~=1: Use start time and end time to calculate the time span for query.
741 +~=1: Use start time to calculate the time interval of query.
766 766  )))
767 767  |(% style="width:277px" %)HDW14|(% style="width:113px" %)Word|(% rowspan="6" style="width:158px" %)Numeric Input|(% rowspan="6" style="width:237px" %)Effective when HDX13.0=1|(% style="width:291px" %)End Time: Year
768 768  |(% style="width:277px" %)HDW15|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Month
... ... @@ -2208,8 +2208,8 @@
2208 2208  
2209 2209  (% style="width:892px" %)
2210 2210  |=(% scope="row" style="width: 208px;" %)Register|=(% style="width: 308px;" %)Description|=(% style="width: 132px;" %)Length|=(% style="width: 241px;" %)Data Format
2211 -|=(% style="width: 208px;" %)HDW6000|(% style="width:308px" %)AppKey of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String
2212 -|=(% style="width: 208px;" %)HDW6020|(% style="width:308px" %)AppSecret of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String
2187 +|=(% style="width: 208px;" %)HDW6000|(% style="width:308px" %)App Key of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String
2188 +|=(% style="width: 208px;" %)HDW6020|(% style="width:308px" %)Secret of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String
2213 2213  |=(% style="width: 208px;" %)HDW6040|(% style="width:308px" %)Device S/N of EZVIZ Cloud|(% style="width:132px" %)43 Words|(% style="width:241px" %)String
2214 2214  |=(% style="width: 208px;" %)HDW6083|(% style="width:308px" %)Channel number of EZVIZ Cloud|(% style="width:132px" %)1 Word|(% style="width:241px" %)16bit Unsigned
2215 2215  |=(% style="width: 208px;" %)HDW6084|(% style="width:308px" %)Device IP of EZVIZ Cloud|(% style="width:132px" %)16 Words|(% style="width:241px" %)String
... ... @@ -2251,54 +2251,54 @@
2251 2251  
2252 2252  The result code of function control will be displayed in HDW6124, the specific code as following table shows:
2253 2253  
2254 -(% style="width:1029px" %)
2255 -|=(% scope="row" style="width: 129px;" %)Result Code|=(% style="width: 366px;" %)Description|=(% style="width: 531px;" %)Remark
2256 -|=(% style="width: 129px;" %)-1|(% style="width:366px" %)Operation failed|(% style="width:531px" %)Other reason(For example network error, device configuration error, etc.)
2257 -|=(% style="width: 129px;" %)-1001|(% style="width:366px" %)Internal error|(% style="width:531px" %)Suggest to retry
2258 -|=(% style="width: 129px;" %)-1002|(% style="width:366px" %)Camera search: Request parameter is empty|(% style="width:531px" %)Confirm the account and password whether correct or not
2259 -|=(% style="width: 129px;" %)-1003|(% style="width:366px" %)Camera search: Search failed|(% style="width:531px" %)Confirm the device ethernet whether connect normal
2260 -|=(% style="width: 129px;" %)-1004|(% style="width:366px" %)Camera binding failed: Invalid camera ID|(% style="width:531px" %)Confirm the camera ID whether is in the valid range
2261 -|=(% style="width: 129px;" %)-1005|(% style="width:366px" %)Camera opening failed: Cannot match the corresponding camera|(% style="width:531px" %)Confirm the account, password and S/N whether correct or not
2262 -|=(% style="width: 129px;" %)-1006|(% style="width:366px" %)Camera opening failed: Cannot adapt minimum resolution|(% style="width:531px" %)Confirm the camera supports ONVIF protocol or not
2263 -|=(% style="width: 129px;" %)-1007|(% style="width:366px" %)Camera opening failed: Cannot get the rtsp stream address|(% style="width:531px" %)Confirm the camera supports ONVIF protocol or not
2264 -|=(% style="width: 129px;" %)-1008|(% style="width:366px" %)Camera opening failed: Cannot adapt the camera parameters|(% style="width:531px" %)Confirm the camera supports ONVIF protocol or not
2265 -|=(% style="width: 129px;" %)-1009|(% style="width:366px" %)Camera opening failed: Open video stream failed|(% style="width:531px" %)Confirm the camera whether is on running status, or whether open the camera too frequently
2266 -|=(% style="width: 129px;" %)-1010|(% style="width:366px" %)Camera closing failed: Camera on the closed status|(% style="width:531px" %)Confirm the camera whether is on running status or not
2267 -|=(% style="width: 129px;" %)-1011|(% style="width:366px" %)Camera closing failed: Camera on the closed status|(% style="width:531px" %)Confirm the camera whether is on running status or not
2268 -|=(% style="width: 129px;" %)-1012|(% style="width:366px" %)Screenshot failed: Camera not opened|(% style="width:531px" %)Confirm the camera whether is on running status or not
2269 -|=(% style="width: 129px;" %)-1013|(% style="width:366px" %)Screenshot failed: Execution error occurred|(% style="width:531px" %)Confirm the camera whether is on normal running status or not
2270 -|=(% style="width: 129px;" %)-1014|(% style="width:366px" %)Alias setting failed: Cannot match the corresponding camera|(% style="width:531px" %)Confirm the S/N whether correct or camera whether is on running status
2271 -|=(% style="width: 129px;" %)-1015|(% style="width:366px" %)Pan-tilt controlling failed: Camera on the closed status|(% style="width:531px" %)Confirm the camera whether is on normal running status or not
2272 -|=(% style="width: 129px;" %)-1016|(% style="width:366px" %)Pan-tilt controlling failed: Camera match failed|(% style="width:531px" %)Confirm the account, password and S/N whether correct and the camera device whether supports pan-tilt movement
2273 -|=(% style="width: 129px;" %)1|(% style="width:366px" %)Operation success|(% style="width:531px" %)Operation success
2274 -|=(% style="width: 129px;" %)201|(% style="width:366px" %)Play address created|(% style="width:531px" %)Do not open the camera frequently
2275 -|=(% style="width: 129px;" %)401|(% style="width:366px" %)Unauthorized|(% style="width:531px" %)Please contact the device administrator to enable operation permission
2276 -|=(% style="width: 129px;" %)403|(% style="width:366px" %)Operation prohibited|(% style="width:531px" %)Please contact the device administrator to enable operation permission
2277 -|=(% style="width: 129px;" %)404|(% style="width:366px" %)Play address not obtain|(% style="width:531px" %)Confirm the device network status
2278 -|=(% style="width: 129px;" %)403|(% style="width:366px" %)User does not exist|(% style="width:531px" %)Confirm the AppKey and AppSecret whether correct
2279 -|=(% style="width: 129px;" %)10001|(% style="width:366px" %)Parameter error|(% style="width:531px" %)Confirm the basic information of EZVIZ Cloud whether correct
2280 -|=(% style="width: 129px;" %)10002|(% style="width:366px" %)AccessToken abnormal or expire|(% style="width:531px" %)Please try to reopen the camera
2281 -|=(% style="width: 129px;" %)10005|(% style="width:366px" %)AppKey abnormal|(% style="width:531px" %)AppKey is frozen, please contact with EZVIZ customer service to unfreeze
2282 -|=(% style="width: 129px;" %)10017|(% style="width:366px" %)AppKey does not exist|(% style="width:531px" %)Confirm the AppKey whether correct or not
2283 -|=(% style="width: 129px;" %)10030|(% style="width:366px" %)AppKey is unmatched with AppSecret|(% style="width:531px" %)Confirm the AppKey and AppSecret whether correct
2284 -|=(% style="width: 129px;" %)20001|(% style="width:366px" %)Channel does not exist|(% style="width:531px" %)Confirm the camera whether re-added or channel parameter whether changed
2285 -|=(% style="width: 129px;" %)20002|(% style="width:366px" %)Device does not exist|(% style="width:531px" %)Confirm the S/N whether correct
2286 -|=(% style="width: 129px;" %)20006|(% style="width:366px" %)Network abnormal|(% style="width:531px" %)Confirm the device network status, try again later
2287 -|=(% style="width: 129px;" %)20007|(% style="width:366px" %)Device offline|(% style="width:531px" %)Confirm the devie whether online or not
2288 -|=(% style="width: 129px;" %)20008|(% style="width:366px" %)Device response timeout|(% style="width:531px" %)Operation too frequent, try again later
2289 -|=(% style="width: 129px;" %)20014|(% style="width:366px" %)S/N illegal|(% style="width:531px" %)Confirm the S/N whether correct
2290 -|=(% style="width: 129px;" %)20018|(% style="width:366px" %)The current user does not own the device|(% style="width:531px" %)Confirm the S/N whether correct
2291 -|=(% style="width: 129px;" %)20032|(% style="width:366px" %)Channel does not exist under the current user|(% style="width:531px" %)Confirm the camera whether re-added or channel parameter whether changed
2292 -|=(% style="width: 129px;" %)49999|(% style="width:366px" %)Data abnormal|(% style="width:531px" %)Please try to reopen the camera
2293 -|=(% style="width: 129px;" %)60000|(% style="width:366px" %)Device does not support pan-tilt controlling|(% style="width:531px" %)Confirm the device whether supports pan-tilt controlling or not
2294 -|=(% style="width: 129px;" %)60001|(% style="width:366px" %)The current user does not have the permission of pan-tilt controlling|(% style="width:531px" %)Please contact the device administrator to enable operation permission
2295 -|=(% style="width: 129px;" %)60002|(% style="width:366px" %)Device tilt reaches to the upper movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation
2296 -|=(% style="width: 129px;" %)60003|(% style="width:366px" %)Device tilt reaches to the lower movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation
2297 -|=(% style="width: 129px;" %)60004|(% style="width:366px" %)Device pan reaches to the left movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation
2298 -|=(% style="width: 129px;" %)60005|(% style="width:366px" %)Device pan reaches to the right movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation
2299 -|=(% style="width: 129px;" %)60006|(% style="width:366px" %)Current pan-tilt controlling operation failed|(% style="width:531px" %)Pan-tilt operation failed, try again later
2300 -|=(% style="width: 129px;" %)60019|(% style="width:366px" %)Device stream is encrypted|(% style="width:531px" %)Using the EZVIZ Cloud client software to close the stream encrypted, then remote monitoring will be able to use
2301 -|=(% style="width: 129px;" %)60020|(% style="width:366px" %)Unsupport this command|(% style="width:531px" %)Confirm the device whether supports this operation or not
2230 +|=(% scope="row" style="width: 129px;" %)Result Code|=(% style="width: 366px;" %)Description|=(% style="width: 519px;" %)Remark
2231 +|=(% style="width: 129px;" %)-1|(% style="width:366px" %)Operation failed|(% style="width:519px" %)Other reason(For example network error, device configuration error, etc.)
2232 +|=(% style="width: 129px;" %)-1001|(% style="width:366px" %)Internal error|(% style="width:519px" %)Suggest to retry
2233 +|=(% style="width: 129px;" %)-1002|(% style="width:366px" %)Camera search: Request parameter is empty|(% style="width:519px" %)Confirm the account and password whether correct or not
2234 +|=(% style="width: 129px;" %)-1003|(% style="width:366px" %)Camera search: Search failed|(% style="width:519px" %)Confirm the device ethernet whether connect normal
2235 +|=(% style="width: 129px;" %)-1004|(% style="width:366px" %)Camera binding failed: Invalid camera ID|(% style="width:519px" %)Confirm the camera ID whether is in the valid range
2236 +|=(% style="width: 129px;" %)-1005|(% style="width:366px" %)Camera opening failed: Cannot match the corresponding camera|(% style="width:519px" %)Confirm the account, password and S/N whether correct or not
2237 +|=(% style="width: 129px;" %)-1006|(% style="width:366px" %)Camera opening failed: Cannot adapt minimum resolution|(% style="width:519px" %)Confirm the camera supports ONVIF protocol or not
2238 +|=(% style="width: 129px;" %)-1007|(% style="width:366px" %)Camera opening failed: Cannot get the rtsp stream address|(% style="width:519px" %)Confirm the camera supports ONVIF protocol or not
2239 +|=(% style="width: 129px;" %)-1008|(% style="width:366px" %)Camera opening failed: Cannot adapt the camera parameters|(% style="width:519px" %)Confirm the camera supports ONVIF protocol or not
2240 +|=(% style="width: 129px;" %)-1009|(% style="width:366px" %)Camera opening failed: Open video stream failed|(% style="width:519px" %)Confirm the camera whether is on running status, or whether open the camera too frequently
2241 +|=(% style="width: 129px;" %)-1010|(% style="width:366px" %)Camera closing failed: Cannot adapt the camera parameters|(% style="width:519px" %)
2242 +|=(% style="width: 129px;" %)-1011|(% style="width:366px" %) |(% style="width:519px" %)
2243 +|=(% style="width: 129px;" %)-1012|(% style="width:366px" %) |(% style="width:519px" %)
2244 +|=(% style="width: 129px;" %)-1013|(% style="width:366px" %) |(% style="width:519px" %)
2245 +|=(% style="width: 129px;" %)-1014|(% style="width:366px" %) |(% style="width:519px" %)
2246 +|=(% style="width: 129px;" %)-1015|(% style="width:366px" %) |(% style="width:519px" %)
2247 +|=(% style="width: 129px;" %)-1016|(% style="width:366px" %) |(% style="width:519px" %)
2248 +|=(% style="width: 129px;" %)1|(% style="width:366px" %) |(% style="width:519px" %)
2249 +|=(% style="width: 129px;" %)201|(% style="width:366px" %) |(% style="width:519px" %)
2250 +|=(% style="width: 129px;" %)401|(% style="width:366px" %) |(% style="width:519px" %)
2251 +|=(% style="width: 129px;" %)403|(% style="width:366px" %) |(% style="width:519px" %)
2252 +|=(% style="width: 129px;" %)404|(% style="width:366px" %) |(% style="width:519px" %)
2253 +|=(% style="width: 129px;" %)405|(% style="width:366px" %) |(% style="width:519px" %)
2254 +|=(% style="width: 129px;" %)10001|(% style="width:366px" %) |(% style="width:519px" %)
2255 +|=(% style="width: 129px;" %)10002|(% style="width:366px" %) |(% style="width:519px" %)
2256 +|=(% style="width: 129px;" %)10005|(% style="width:366px" %) |(% style="width:519px" %)
2257 +|=(% style="width: 129px;" %)10017|(% style="width:366px" %) |(% style="width:519px" %)
2258 +|=(% style="width: 129px;" %)10030|(% style="width:366px" %) |(% style="width:519px" %)
2259 +|=(% style="width: 129px;" %)20001|(% style="width:366px" %) |(% style="width:519px" %)
2260 +|=(% style="width: 129px;" %)20002|(% style="width:366px" %) |(% style="width:519px" %)
2261 +|=(% style="width: 129px;" %)20006|(% style="width:366px" %) |(% style="width:519px" %)
2262 +|=(% style="width: 129px;" %)20007|(% style="width:366px" %) |(% style="width:519px" %)
2263 +|=(% style="width: 129px;" %)20008|(% style="width:366px" %) |(% style="width:519px" %)
2264 +|=(% style="width: 129px;" %)20014|(% style="width:366px" %) |(% style="width:519px" %)
2265 +|=(% style="width: 129px;" %)20018|(% style="width:366px" %) |(% style="width:519px" %)
2266 +|=(% style="width: 129px;" %)20032|(% style="width:366px" %) |(% style="width:519px" %)
2267 +|=(% style="width: 129px;" %)49999|(% style="width:366px" %) |(% style="width:519px" %)
2268 +|=(% style="width: 129px;" %)60000|(% style="width:366px" %) |(% style="width:519px" %)
2269 +|=(% style="width: 129px;" %)60001|(% style="width:366px" %) |(% style="width:519px" %)
2270 +|=(% style="width: 129px;" %) |(% style="width:366px" %) |(% style="width:519px" %)
2271 +|=(% style="width: 129px;" %) |(% style="width:366px" %) |(% style="width:519px" %)
2272 +|=(% style="width: 129px;" %) |(% style="width:366px" %) |(% style="width:519px" %)
2273 +|=(% style="width: 129px;" %) |(% style="width:366px" %) |(% style="width:519px" %)
2274 +|=(% style="width: 129px;" %) |(% style="width:366px" %) |(% style="width:519px" %)
2275 +|=(% style="width: 129px;" %) |(% style="width:366px" %) |(% style="width:519px" %)
2276 +|=(% style="width: 129px;" %) |(% style="width:366px" %) |(% style="width:519px" %)
2277 +|=(% style="width: 129px;" %) |(% style="width:366px" %) |(% style="width:519px" %)
2302 2302  
2303 2303  (% class="wikigeneratedid" %)
2304 2304  **Default Configuration**：Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.