Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41

From 38.1 to 37.3 From 53.2 to 53.1

From version 53.1

edited by Karen
on 2023/05/25 11:56

Change comment: There is no comment for this version

To version 38.1

edited by Karen
on 2023/05/24 14:12

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -647,7 +647,7 @@
  * **Align left: **data display on the left.
  * **Align right: **data display on the right.
  * **Exchange high-low byte: **Exchange High-low byte: Check it to exchange and display the contents of the high and low bytes. If the number of contents is not a multiple of 2, the rounding process will be performed.
--* **Length: **The length of characters, the maximum length is 256.
++* **Length: **The length for characters, the maximum length is 256.
  * **Exchange high-low word: **Check it to exchange and display the contents of high and low word. Only valid if the number of operating characters of the part is a multiple of 4.
  **Keypad position**
@@ -669,7 +669,7 @@
  **Introduction**
--This section will introduce common settings in Chart objects.
++This section will introduce common settings in Chart objects
  **Shape**
@@ -676,7 +676,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_9f4692cce1805843.gif||class="img-thumbnail"]]
--Set appearance of object, including background color, head color, text color, line color, select row color.
++Set appearance of object, includes background color, head color, text color, line color, select row color
  **Advance**
@@ -685,7 +685,7 @@
  * **Head text color**: It sets the text color of the header.
  * **Transparency**: It sets transparency of the table background, 0% represents full transparency, and 100% represents completely opaque.
--* **Cell type**: Default is adaptive width. After selecting customization, customization could set the width of the cell.
++* **Cell type**: Default is adaptive width. After select a customization, customization could set the width of the cell.
  * **Date and time format: **According to the needs to select the date and time display format. "NONE" means no display; please do not set both time and date to "NONE".
  **Function start address**
@@ -695,11 +695,11 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_361b1ee164769c5d.gif||class="img-thumbnail"]]
--The address you fill in is only the start address. This address, including 20 consecutive addresses after this address, will be occupied. Please organize your address to prevent unnecessary errors from being reused.
++The address you fill in is only as the start address. This address, including 20 consecutive addresses after this address, will be occupied. Please organize your address to prevent unnecessary errors from being reused.
--**For example,** HDW0 is the function start address, then the addresses HDW0 to HDW19 are occupied. If you need the power-down storage setting, you may set the address as the address of register HAW (HAW0 to HAW200000).
++**For example,** HDW0 is the function start address, then the addresses HDW0 to HDW19 are ocupied. IF you need the  power-down  storange setting, you may set the address as the address of register HAW (HAW0 to HAW200000) .
--If the start address is set as HDW0, the function and address table is as below.
++If the start address set as HDW0, the function and address table is as below.
  (% class="table-bordered" %)
  |=(% style="width: 277px;" %)**Address**|=(% style="width: 113px;" %)**Type**|=(% style="width: 158px;" %)**Object**|=(% colspan="2" style="width: 528px;" %)**Function**
@@ -714,9 +714,9 @@
  |(% style="width:277px" %)HDW8|(% style="width:113px" %)Word|(% style="width:158px" %)Word Switch|(% colspan="2" style="width:528px" %)(((
  Default as 1. It can contain 50 records per page
--Page Up: Current Value minus 1.
++Page Up : Current Value minus 1.
--Page Down: Current Value add 1.
++Page Down : Current Value add 1.
  Range: 1 to 65535
  )))
@@ -782,8 +782,8 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_71f505c7146db030.gif||class="img-thumbnail"]]
--* **Background type:** There are four modes, style 1 and style 2 are gradient mode, style 3 is solid color mode, and style 4 is transparent.
--* **Transparency:** transparency could be set from 0% to 100%. when set to 0%, the background is completely transparent.
++* **Background type:** There are four modes, style 1 and style 2 is gradient mode, style 3 is solid color mode, style 4 is transparent.
++* **Transparency:** transparency could be set from 0% to 100%. when set to 0%,the background is completely transparent.
  * **Position: **Show position coordinates for X and Y axes.
  * **Size: **Set object size.
@@ -790,7 +790,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_64c6da58525278cb.gif||class="img-thumbnail"]]
--* **Number of X, Y axis: **Set the number of grids on the XY axis could be set from 1 to 10 divisions.
++* **Number of X,Y axis: **Set the number of grids on the XY axis could be set from 1 to 10 divisions.
  * **Color setting: **Color1 is for object frame;color2 is for grid background.
  * **Show dot:** Display the data points of each trend graph.
  * **User font: **If check it, user could change the font for grid and time, if uncheck it, object uses build-in font.
@@ -871,16 +871,16 @@
  (% style="text-align:center" %)
  [[image:image-20220802113935-1.gif]]
--There are 8 buttons will display below the graph, shown as following.
++There are 8 buttons will display in below the graph, shown as following.
 . [[image:image-20220616162002-15.jpeg]] Historical trend chart query button
 . [[image:image-20220616162008-16.png]] ** **Set the time and span of historical trend chart
 . [[image:image-20220616162013-17.png]] ** **Refresh
 . [[image:image-20220616162018-18.png]] ** **Move forward by span time
--1. [[image:image-20220616162021-19.png]] **: **Move backwards by span time
--1. [[image:image-20220616162025-20.png]] : Slider display control button, slider position can display the current time and the current numerical status of each curve.
++1. [[image:image-20220616162021-19.png]] **:**Move backwards by span time
++1. [[image:image-20220616162025-20.png]] :Slider display control button, slider position can display the current time and the current numerical status of each curve.
 . [[image:image-20220616162028-21.png]]  Zoom in by one time according to the length of the span.
--1. [[image:image-20220616162032-22.png]] : Zoom out by one time according to the length of the span.
++1. [[image:image-20220616162032-22.png]] :Zoom out by one time according to the length of the span.
  (% class="box infomessage" %)
  (((
@@ -948,13 +948,13 @@
  * [[image:6.Objects_html_92e1910330039a59.gif||height="49" width="48" class="img-thumbnail"]] Query setting
  * [[image:6.Objects_html_4efc52d4a7f1ea02.gif||height="49" width="49" class="img-thumbnail"]] Refresh page
--* [[image:image-20220808142509-1.png||height="48" width="49" class="img-thumbnail"]]means moving up one row
++* [[image:image-20220808142509-1.png||height="48" width="49" class="img-thumbnail"]]means moving up one row;
  * [[image:image-20220808142518-2.png||height="49" width="50" class="img-thumbnail"]]means page up.
--* [[image:image-20220808142538-3.png||height="45" width="49" class="img-thumbnail"]] means moving down one row.
++* [[image:image-20220808142538-3.png||height="45" width="49" class="img-thumbnail"]] means moving down one row;
  * [[image:image-20220808142546-4.png||class="img-thumbnail"]] means page down.
--* [[image:image-20220808142603-5.png||class="img-thumbnail"]] means moving left column.
++* [[image:image-20220808142603-5.png||class="img-thumbnail"]] means moving left column;
  * [[image:image-20220808142610-6.png||class="img-thumbnail"]]means moving the display to the left.
--* [[image:image-20220808142623-7.png||class="img-thumbnail"]]means moving right column.
++* [[image:image-20220808142623-7.png||class="img-thumbnail"]]means moving right column;
  * [[image:image-20220808142630-8.png||class="img-thumbnail"]]means moving the display to right.
  (% class="box infomessage" %)
@@ -1086,24 +1086,24 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_858d4ec965274b8a.gif||class="img-thumbnail"]]
--* **File type: **There are more than one function in this object, this is for selecting function, select [System message], when event occurs, it displays prompt messages automatically.
++* **File type: **There are more than one functions in this object, this is for selecting function, select [System message],when event occurs, it displays prompt messages automatically.
  * **Select line: **Set address for select row.
  **Address Control**
--* **Start group: **Control displaying start from specified row, which means display from specified group.
--* For example, set 40
++* **Start group: **control displaying start fromspecified row, which means display from specified group.
++* For example set 40,
  ** If 40=1, Start from first row (first group).
  ** If 40=2, Start from second row (second group).
  ** ...
  ** If 40=10, Start from 10th row (10th group).
  * **Group number address: **Control the number of rows displayed;
--* For example, set 410
++* For example set 410,
  ** If 410=1, this object only displays 1 row (1 group).
  ** If 410=2, this object displays 2 rows (2 groups).
  ** ...
  ** If 410=10, this object displays 10 rows (10 groups).
--* **Start address: **Control displaying start from specified column, which means display from specified member.
++* **Start address: **Control displaying start fromspecified column, which means display from specified member.
  * For example, set 420,
  ** If 420=1, Start from first column (first member).
  ** If 420=2, Start from second column (second member).
@@ -1136,7 +1136,7 @@
  **✎Note:**
  * If the file type is recipe file, modify the value of the address of "Select line" to control the selected line in the display list to the corresponding line. If another file type is selected, this address can only display the selected line (read-only mode).
--* For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. The options of them will no longer be displayed in the record.
++* For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. They options of them will no longer be displayed in the record.
  * For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
  == **File list** ==
@@ -1143,7 +1143,7 @@
  "File List" displays the recipe file name of the current project in the form of table in HMI. If there is no recipe file in the project, the table of the object is empty. (Table and trend chart objects currently only support Song Typeface, other fonts you set will not work.
--Recipe files in "Flash", and also shows custom folder information.
++recipe files in "Flash", and also shows custom folder information.
  **Function (Recipe File)**
@@ -1153,7 +1153,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_66cd30b2b962a04e.gif||class="img-thumbnail"]]
--* **File type: **[Recipe File] is for displaying recipe files in Flash.
++* **File type: **[Recipe File] is for display recipe files in Flash.
  * **Folder name:** This is located to recipe function setting.
  * **Select line:** Select one line in list and display its line No. in this address.
  * For example, set 40,
@@ -1162,7 +1162,7 @@
  ** ...
  ** If 40=10, the 10th row of object is selected.
--✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying line No.
++✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying the line No.
  * **Folder name address:** This is for setting recipe file name, in advance recipe mode.
@@ -1187,9 +1187,9 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_dc49c7d7148792b3.gif||class="img-thumbnail"]]
--Function address includes copy, paste, delete, and rename. And HMI automatically assigns the functions to bit addresses.
++Function address includes copy, past, delete and rename. And HMI automatically assigns the functions to bit addresses.
--For example, if the function address is HDW 90, the detailed information is below.
++For example, if the function address is HDW 90, the detailed information as below.
  (% class="table-bordered" %)
  |**Address**|**Address type**|**Object type**|**Function**
@@ -1332,15 +1332,15 @@
  ** **History**: Historical data can be queried.
  ** **Real Time**: Only real-time data is displayed.
  * **Curve Buffer**
--** **History**: It is in data record area configured by data record. Multiple record groups could be configured, and each record group has multiple channels.
++** **History**: Ii is in data record area configured by data record. Multiple record groups could be configured, and each record group has multiple channels.
  ** **Real Time**: It is in Real-time trend chart configured by data record. Multiple record groups could be configured, and each record group has multiple curve numbers.
--**✎Note: **There must be one of settings (Data record and real-time trend chart) in configurations, otherwise there will be no data in curve buffer.
++**✎Note: **There must be one of settings (Data record and real-time trend chart) in configurations, otherwise there will no data in curve buffer.
--* **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed. After selecting the curve to be displayed, it can set the scale range and scale color of each curve.
--* **Enable**: After selecting the corresponding curve number in the status bar and enabling the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
++* **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed.After selecting the curve to be displayed, it can set the scale range and scale color of each curve.
++* **Enable**: After selecting the corresponding curve number in the status bar and enable the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
  * **Data Range: **Directly set the maximum and minimum values of the displayed graph. If the box "Variable Range" is checked, the set data is read from the filled address. The data format of the address is set as needed, and the length of the variable address is related to the set data format.
--* **Display Scale Value: **Display the value of disc record. The font color could be changed.
++* **Display Scale Value: **Display the value of disc record. The font color could be changed
  **Appearance**
@@ -1347,9 +1347,9 @@
  (% style="text-align:center" %)
  [[image:6-3DiscRecordConfigAppearen.png||class="img-thumbnail"]]
--1. **Circular Axis Scale**: Number of scale intervals in the direction of the circular axis. The range is 1 to 10.
--1. **Start Position**: The starting position to draw the curve: top, bottom, left, and right.
--1. **Rotary Axis Scale**: Number of scale intervals in the direction of the axis of rotation. The range is 4, 6, and 12.
++1. **Circular Axis Scale**: Number of scale intervals in the direction of the circular axis. The range is1 to10.
++1. **Start Position**: The starting position to draw the curve: top, bottom, left and right.
++1. **Rotary Axis Scale**: Number of scale intervals in the direction of the axis of rotation. The range is 4, 6 and 12.
 . **Inner Circle Size**: Ratio of the inner circle to the outer circle.
 . **Scale Style**: The way the scale is displayed, style 0 represents adaptive display, and style 1 represents forward display.
 . **Background Color**: Appearance background color.
@@ -1385,7 +1385,7 @@
  == **Pointer meter** ==
--The meter responds to change in the value of the indicated word address by means of a dial and a pointer. The meter looks very similar to the actual meter.
++The meter responds to changes in the value of the indicated word address by means of a dial and a pointer. The meter looks very similar to the actual meter.
  (% style="text-align:center" %)
  [[image:image-20220805161001-1.jpeg]]
@@ -1400,13 +1400,13 @@
  * 32-bit signed decimal
  * 32-bit unsigned decimal
--**Digits setting:** Set directly the maximum and the minimum. Only when the floating point number is selected, can the maximum and minimum value be with a decimal point, and other data formats can't be with a decimal point. If the value is read by the address, then select "variable limits", and fill in the address.
++**Digits setting:** set directly the maximum and the minimum. Only when the floating point number is selected, can the the maximum and minimum value be with a decimal point, and other data format can't be with a decimal point. If the value is read by the address, then select "variable limits", and fill in the address.
  * **Min angle and max angle:** Data range, if data beyond range will be not inputted.
--**Variable limits:** When checked, low limit address and high limit address could be edit showed below;
++**Variable limits:** when checked, low limit address and high limit address could be edit showed below;
--**Show meter background**: This is for setting meter background. When not checked, the background color is transparent; When checked, there are four styles of pointer meter to select according to needs.
++**Show meter background**: This is for setting meter background. When not checked, the background color is transparent; When checked, there are four styles of pointer meter to select it according to needs.
  **Show pointer**: When not checked, the pointer is not displayed; When checked, you could set the style and color of pointer.
@@ -1414,15 +1414,15 @@
  **Show scale**: Display the scale on the object to observe the value. You need to set major scale, minor scale and scale value.
--**Meter Type:** It sets the angle between the maximum and minimum value. It provides 7 kinds of styles, they are 180°, 210°, 240°, 270°, 300°, 330° and 360°.
++**Meter Type:** It sets the angel between the maximum and minimum value. It provides 7 kinds of styles, they are 180°, 210°, 240°, 270°, 300°, 330° and 360°.
  **Start angle: **It sets the position where the minimum value is displayed.
--**Position&size:** Set the position of the object on the screen and the size of the object. The object is displayed as square. If the width or the height of the object is changed, the other data will also be changed.
++**Position&size:** Set the position of the object in the screen and the size of the object. The object is displayed as square. If the width or the height of the object is changed, the other data will also be changed.
  **Result**
--When configuration is completed, the object is shown below picture when HMI is running.
++When configuration is completed, the object is shown as below picture when HMI is running.
  (% style="text-align:center" %)
  [[image:6.Objects_html_1b8e24a5065cf96a.gif||class="img-thumbnail"]]
@@ -1605,10 +1605,13 @@
  == **QR Code** ==
++**Introduction**
++
  It is similar to the universal QR code. You could scan this object to get the connection or content, but it provides content settings for QR code.
  **Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_4cf155075ac97d16.gif||class="img-thumbnail"]]
@@ -1620,7 +1620,7 @@
  **✎Note:**
  * HMI machine ID address: HSW10494 ~~ HSW10558.
--* So if user want to use QR code to display machine ID on project screen, please check "Variable QR", and set address is HSW10494.
++* So if user want to use QR code to display machine ID in project screen, please check "Variable QR", and set address is HSW10494.
  * When scanning the QR code by APP to monitor HMI, the default access password is 888888.
  == **Picture** ==
@@ -1646,9 +1646,9 @@
  This is advanced function of picture object; user can change display picture when HMI is running. The supported formats are bmp, jpg, png, jpeg. This feature is unavailable for offline and online simulation.
--1. **Root: **Set the save location of the picture, which can be set to U disk,SD card,but could not be set to Flash.
++1. **Root: **Set the save location of the picture,which can be set to U disk,SD card,but could not be set to Flash.
 . **Folder: **Set the name of the folder where the picture is located.The folder name can be up to 31 characters. （Note：The picture must be stored in the U disk folder and cannot be stored in the root directory of the U disk.）
--1. **File address: **16 consecutive addresses enter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.
++1. **File address: **16 consecutive addressesenter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.
  ✎**Note:**
@@ -1681,7 +1681,7 @@
  * **Min. angle:** It sets the starting angle of rotation (Valid in auto-rotation mode).
  * **Max. angle:** It sets the ending angle of rotation (Valid in auto-rotation mode).
--**Rotation angle: **The rotating angle is determined by designated address;
++**Rotation angle: **the rotating angle is determined by designated address;
  **Rotation center**: It shows the rotation center coordinates;
@@ -1695,7 +1695,7 @@
  **Enable auto-spin: **When the address is set to ON, the picture will rotate automatically.
--**Hide:** Control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.
++**Hide:** control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.
  == **Drop-down List** ==
@@ -1711,18 +1711,18 @@
  **1) Edit**
 . **Read Address:** The data from designated address will be displayed.
--1. **Same read-write address:** Configure "Write Address" as the same as "Read Address".
--1. **Write Address: **Write data to designated address. The address can be different from "Read Address".
++1. **Same read-write address:** Configure "Write Address" is the same as "Read Address".
++1. **Write Address: **Write data to designated address. The address can be different "Read Address".
  **2) Format**
--Set data format for object, it provides 16-bit unsigned decimal,16-bit BCD, 16-bit unsigned decimal, 32-bit BCD, 32-bit unsigned decimal, and 32-bit unsigned decimal.
++Set data format for object, it provides 16-bit unsigned decimal,16-bit BCD, 16-bit unsigned decimal, 32-bit BCD, 32-bit unsigned decimal and 32-bit unsigned decimal.
  **3) State count**
  It could set the total number to display in the drop-list and supports up to 128 states (1 to 128). The default value of state is corresponding to the number of states. (State 1 corresponding to value 1). You can also click "state values" to set it according to your needs.
--**State value: **User can set different values to correspond to different states, the setting window as below figure shows.
++**State value: **You can set different values to correspond to different states, the setting window as below figure shows.
  (% style="text-align:center" %)
  [[image:6.Objects_html_da9a6696f320b427.gif||class="img-thumbnail"]]
@@ -1766,12 +1766,12 @@
  **3) Read state text from address**
--1. **Text start address: **The first address of occupied multiple consecutive addresses. Address length: [Text length/2] *[state number +1].
++1. **Text start address: **the first address of occupied multiple consecutive addresses. Address length: [Text length/2] *[state number +1].
  * For example: 10 states, the address length= (10/2) *(10+1) =55. It set HDW100 as start address, so the HDW100-HDW104 stores the currently selected text content, the HDW105-HDW109 displays the text in the first state, the HDW110-HDW114 displays the second, and so on.
  (% start="2" %)
--1. **Refresh: **The drop-down list status value is updated according to the text address content. The drop-down list is not updated immediately, when the data in the text address change is completed, only the refresh is triggered, it will update.
++1. **Refresh:**The drop-down list status value is updated according to the text address content.The drop-down list is not updated immediately, when the data in the text address change is completed, only the refresh is triggered, it will update.
  == **Camera display** ==
@@ -1783,8 +1783,6 @@
  === **IP Camera** ===
--**(1) General**
--
  (% style="text-align:center" %)
  [[image:6.Objects_html_2bc22bd50bf65eb.gif||class="img-thumbnail"]]
@@ -2194,7 +2194,7 @@
  The camera configured via ip only supports, turn on, turn off, screenshot basic functions.
  )))
--**EZVIZ Cloud Description**
++**EZVIZ Cloud Descirption**
  (% style="text-align:center" %)
  [[image:企业微信截图_1673081149790.png]]
@@ -2300,23 +2300,23 @@
  |=(% style="width: 129px;" %)60020|(% style="width:366px" %)Unsupport this command|(% style="width:531px" %)Confirm the device whether supports this operation or not
  (% class="wikigeneratedid" %)
--**Default Configuration**： Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
++**Default Configuration**：Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
  **In the default configuration, the following are required：**
--**AppKey**： EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
--**Secret**： EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
--**Channel number**： EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
++**AppKey**：EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
++**Secret**：EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
++**Channel number**：EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
--**S/N： **EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
++**S/N：**EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
  **In the default configuration, the following are optional:**
--**IP**： EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
++**IP**：EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
--**RTSP Port**： EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
--**Verification Code**： EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
++**RTSP Port**：EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
++**Verification Code**：EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
  {{info}}
  **✎Note: **The required content in the configuration only supports remote monitoring when the camera screen can be displayed, if there is a demand for the screen side can also display the camera screen, user need to fill in the optional content in the configuration.
@@ -2324,8 +2324,6 @@
  === **USB Camera** ===
--**(1) General**
--
  (% style="text-align:center" %)
  [[image:6.Objects_html_6d926ea40f8267c.gif||class="img-thumbnail"]]
@@ -2342,7 +2342,7 @@
  |(% style="width:144px" %)1|(% style="width:700px" %)Enable the screenshot function
  |(% style="width:144px" %)2|(% style="width:700px" %)refresh camera display object
--**Camera state: **It shows the current camera states. It occupies a word address. Different value means different operations, as below table shows:
++**Camera state: **It shows the current camera states. Itoccupies a word address. Different value means different operations, as below table shows:
  (% class="table-bordered" %)
  |=**Value**|=**Operation**
@@ -2363,11 +2363,11 @@
  The current screenshots are only allowed on the SD card. When the SD card does not exist the system will cache the latest 10 screenshots.
--**Picture name: **The name of the image is controlled by the address. The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
++**Picture name: **The name of the image is controlled by the address.The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
  **4) Global screenshot**
--If this function is enabled, camera display object can perform the screenshot operation when HMI is running and save it as a . BMP image.
++If this function is enable, camera display object can perform the screenshot operation when HMI is running and save it as a .BMP image.
  If this function is disabled, camera display object only performs the screenshot operation when it is displayed on screen.
@@ -2377,15 +2377,15 @@
  **6) Use resolution size**
--Coordinate displays the object location on the screen, and size is the length and width of the object.
++Coordinate displays the object location in the screen, and size is the length and width of the object.
  **✎Note:**
  * When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
--* When HMI is displayed horizontally, the USB camera screen displays normally. If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
++* When HMI is displayed horizontally, the USB camera screen displays normally.If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
  * One HMI is only allowed to connect with one USB camera device. There is only one USB camera display part in the whole project screen, and the camera display part is not allowed to be placed on the public screen (1002: common Windows).
  * Sometimes the USB camera may lose the image because of the influence in the field, then we suggest to PI9000 HMI and the recommended USB camera model.
--* All below USB camera model have been tested by WECON to ensure compatibility.
++* All below USB camera model have been tested by WECON to ensure the compatibility.
  * Currently, only PI8000 and PI9000 series support the USB camera function. Recommended USB cameras include:
  ** REB-USB 100W07M (supports 720p)
  ** WX152HD (supports 720p)

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents