Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41

From 52.2 to 53.1 From 56.3 to 57.1

From version 53.1

edited by Karen
on 2023/05/25 11:56

Change comment: There is no comment for this version

To version 56.3

edited by Karen
on 2023/05/25 14:26

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -2394,10 +2394,8 @@
  == **Camera control** ==
--**Introduction**
++This is for control camera; This object need to be used with camera display object.
--This is for control camera; this object need to be used with camera display object.
--
  **Description**
  (% style="text-align:center" %)
@@ -2407,11 +2407,11 @@
  Read a string from designated system address, and then combine the instruction to control the camera image.
--When the dynamic control command is disabled, the complete camera control command be entered in order to display the camera contents.
++When the dynamic control command is disabled, the complete camera control command is entered in order to display the camera contents.
  **2) Camera control instruction**
--This is for enter static instruction for camera, so that users can operation camera when HMI running;
++This is for entering static instruction for camera so that users can operate camera when HMI running.
  **3) Control bit**
@@ -2423,7 +2423,7 @@
  == **Flow component** ==
--The flow components are mainly used to reflect the flow state in process flow production. You could set the style of flow components according to requirements.
++The flow components are mainly used to reflect the flow state in process flow production. User could set the style of flow components according to requirements.
  **Description**
@@ -2443,9 +2443,9 @@
 . **Block width:** It sets block width of flow component.
 . **PipeFrn width: **It sets outer border width of flow component.
 . **Block length: **It sets block length of flow component.
--1. **Transparence:** It sets transparence of flow component.(from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
--1. **Ratio:** It sets display ratio of block and background (Display density of the block in flow component).
--1. **Speed:** It setsflow speed of the block during HMI running.
++1. **Transparence:** It sets transparence of flow component. (from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
++1. **Ratio:** It sets the display ratio of block and background (Display density of the block in flow component).
++1. **Speed:** It sets flow speed of the block during HMI running.
  **(3) Control**
@@ -2469,9 +2469,9 @@
  == **Printer** ==
--The printing object is primarily suitable for print out or screenshots saving when connected to micro printer.
++The printing object is primarily suitable for printing out or screenshots saving when connected to micro printer.
--Printer has two types: **serial printer and USB printer**. Printf (printext function) should be called when it's used to print fixed message in a script.
++Printer has two types: serial printer and USB printer. Printf (printext function) should be called when it's used to print fixed message in a script.
  **Printer protocol**
@@ -2491,18 +2491,18 @@
  **(1) Display settings**
 . **Direction: **Four direction choices in printing: 0, 90, 180, and 270.
--1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion with paper size.
++1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion to paper size.
  **(2) Trigger mode**
--1. **Trigger address: **When trigger address turns ON.Printer starts to respond operation.
++1. **Trigger address: **When trigger address turns ON. The printer starts to respond operationally.
 . **Printer\ Save:** It sets operation for this object, printer object could support sending printing command to printer device, and including screenshot.
  **(3) Save path**
--Valid when the save mode is selected, screenshot the content in printing object area and the save it in specified storage and folder, when trigger address turns ON.
++Valid when the save mode is selected, screenshot the content in printing object area, and save it in specified storage and folder, when trigger address turns ON.
--Folder: It's available to select SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
++Folder: It's available to select an SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture the first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
  **Related issues**
@@ -2595,16 +2595,14 @@
  == **Text** ==
--It adds text to HMI screen, and a object can be displayed in 8 languages (set in "All Languages") with a special address setting.
++It adds text to HMI screen, and an object can be displayed in 8 languages (set in "All Languages") with a special address setting.
--**Description**
--
  (% style="text-align:center" %)
  [[image:6.Objects_html_3cae6153cc6e4750.gif||class="img-thumbnail"]]
  **(1) Current state**
--It used to switch the object states, but [Text] object only has one state, so this function is invalid.
++It is used to switch the object states, but [Text] object only has one state, so this function is invalid.
  **(2) All language**
@@ -2623,7 +2623,7 @@
  **(5) Text color**
--It sets color for text in object.
++It sets color of text in object.
  **(6) Text background**

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents