Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41

From 48.1 to 47.1 From 53.3 to 53.2

From version 53.2

edited by Karen
on 2023/05/25 13:41

Change comment: There is no comment for this version

To version 48.1

edited by Karen
on 2023/05/25 09:47

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -1681,7 +1681,7 @@
  * **Min. angle:** It sets the starting angle of rotation (Valid in auto-rotation mode).
  * **Max. angle:** It sets the ending angle of rotation (Valid in auto-rotation mode).
--**Rotation angle: **The rotating angle is determined by designated address;
++**Rotation angle: **the rotating angle is determined by designated address;
  **Rotation center**: It shows the rotation center coordinates;
@@ -1695,7 +1695,7 @@
  **Enable auto-spin: **When the address is set to ON, the picture will rotate automatically.
--**Hide:** Control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.
++**Hide:** control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.
  == **Drop-down List** ==
@@ -1711,18 +1711,18 @@
  **1) Edit**
 . **Read Address:** The data from designated address will be displayed.
--1. **Same read-write address:** Configure "Write Address" as the same as "Read Address".
--1. **Write Address: **Write data to designated address. The address can be different from "Read Address".
++1. **Same read-write address:** Configure "Write Address" is the same as "Read Address".
++1. **Write Address: **Write data to designated address. The address can be different "Read Address".
  **2) Format**
--Set data format for object, it provides 16-bit unsigned decimal,16-bit BCD, 16-bit unsigned decimal, 32-bit BCD, 32-bit unsigned decimal, and 32-bit unsigned decimal.
++Set data format for object, it provides 16-bit unsigned decimal,16-bit BCD, 16-bit unsigned decimal, 32-bit BCD, 32-bit unsigned decimal and 32-bit unsigned decimal.
  **3) State count**
  It could set the total number to display in the drop-list and supports up to 128 states (1 to 128). The default value of state is corresponding to the number of states. (State 1 corresponding to value 1). You can also click "state values" to set it according to your needs.
--**State value: **User can set different values to correspond to different states, the setting window as below figure shows.
++**State value: **You can set different values to correspond to different states, the setting window as below figure shows.
  (% style="text-align:center" %)
  [[image:6.Objects_html_da9a6696f320b427.gif||class="img-thumbnail"]]
@@ -1766,12 +1766,12 @@
  **3) Read state text from address**
--1. **Text start address: **The first address of occupied multiple consecutive addresses. Address length: [Text length/2] *[state number +1].
++1. **Text start address: **the first address of occupied multiple consecutive addresses. Address length: [Text length/2] *[state number +1].
  * For example: 10 states, the address length= (10/2) *(10+1) =55. It set HDW100 as start address, so the HDW100-HDW104 stores the currently selected text content, the HDW105-HDW109 displays the text in the first state, the HDW110-HDW114 displays the second, and so on.
  (% start="2" %)
--1. **Refresh: **The drop-down list status value is updated according to the text address content. The drop-down list is not updated immediately, when the data in the text address change is completed, only the refresh is triggered, it will update.
++1. **Refresh:**The drop-down list status value is updated according to the text address content.The drop-down list is not updated immediately, when the data in the text address change is completed, only the refresh is triggered, it will update.
  == **Camera display** ==
@@ -1783,8 +1783,6 @@
  === **IP Camera** ===
--**(1) General**
--
  (% style="text-align:center" %)
  [[image:6.Objects_html_2bc22bd50bf65eb.gif||class="img-thumbnail"]]
@@ -2194,7 +2194,7 @@
  The camera configured via ip only supports, turn on, turn off, screenshot basic functions.
  )))
--**EZVIZ Cloud Description**
++**EZVIZ Cloud Descirption**
  (% style="text-align:center" %)
  [[image:企业微信截图_1673081149790.png]]
@@ -2300,23 +2300,23 @@
  |=(% style="width: 129px;" %)60020|(% style="width:366px" %)Unsupport this command|(% style="width:531px" %)Confirm the device whether supports this operation or not
  (% class="wikigeneratedid" %)
--**Default Configuration**： Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
++**Default Configuration**：Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
  **In the default configuration, the following are required：**
--**AppKey**： EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
--**Secret**： EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
--**Channel number**： EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
++**AppKey**：EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
++**Secret**：EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
++**Channel number**：EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
--**S/N： **EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
++**S/N：**EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
  **In the default configuration, the following are optional:**
--**IP**： EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
++**IP**：EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
--**RTSP Port**： EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
--**Verification Code**： EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
++**RTSP Port**：EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
++**Verification Code**：EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
  {{info}}
  **✎Note: **The required content in the configuration only supports remote monitoring when the camera screen can be displayed, if there is a demand for the screen side can also display the camera screen, user need to fill in the optional content in the configuration.
@@ -2324,8 +2324,6 @@
  === **USB Camera** ===
--**(1) General**
--
  (% style="text-align:center" %)
  [[image:6.Objects_html_6d926ea40f8267c.gif||class="img-thumbnail"]]
@@ -2342,7 +2342,7 @@
  |(% style="width:144px" %)1|(% style="width:700px" %)Enable the screenshot function
  |(% style="width:144px" %)2|(% style="width:700px" %)refresh camera display object
--**Camera state: **It shows the current camera states. It occupies a word address. Different value means different operations, as below table shows:
++**Camera state: **It shows the current camera states. Itoccupies a word address. Different value means different operations, as below table shows:
  (% class="table-bordered" %)
  |=**Value**|=**Operation**
@@ -2363,11 +2363,11 @@
  The current screenshots are only allowed on the SD card. When the SD card does not exist the system will cache the latest 10 screenshots.
--**Picture name: **The name of the image is controlled by the address. The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
++**Picture name: **The name of the image is controlled by the address.The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
  **4) Global screenshot**
--If this function is enabled, camera display object can perform the screenshot operation when HMI is running and save it as a . BMP image.
++If this function is enable, camera display object can perform the screenshot operation when HMI is running and save it as a .BMP image.
  If this function is disabled, camera display object only performs the screenshot operation when it is displayed on screen.
@@ -2377,15 +2377,15 @@
  **6) Use resolution size**
--Coordinate displays the object location on the screen, and size is the length and width of the object.
++Coordinate displays the object location in the screen, and size is the length and width of the object.
  **✎Note:**
  * When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
--* When HMI is displayed horizontally, the USB camera screen displays normally. If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
++* When HMI is displayed horizontally, the USB camera screen displays normally.If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
  * One HMI is only allowed to connect with one USB camera device. There is only one USB camera display part in the whole project screen, and the camera display part is not allowed to be placed on the public screen (1002: common Windows).
  * Sometimes the USB camera may lose the image because of the influence in the field, then we suggest to PI9000 HMI and the recommended USB camera model.
--* All below USB camera model have been tested by WECON to ensure compatibility.
++* All below USB camera model have been tested by WECON to ensure the compatibility.
  * Currently, only PI8000 and PI9000 series support the USB camera function. Recommended USB cameras include:
  ** REB-USB 100W07M (supports 720p)
  ** WX152HD (supports 720p)
@@ -2394,6 +2394,8 @@
  == **Camera control** ==
++**Introduction**
++
  This is for control camera; this object need to be used with camera display object.
  **Description**

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents