Skip to Content

Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41
From version 71.2
edited by Leo Wei
on 2023/07/27 16:27
Change comment: Deleted object
To version 82.1
edited by Jim(Forgotten)
on 2023/08/11 09:27
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.admin
1 +XWiki.Jim
Content
... ... @@ -458,6 +458,8 @@
458 458  * **Run times: **Configuration sub-function execute times. 0 means unlimited times.
459 459  * **Break:** Stop executing sub-function when trigger address is ON.
460 460  
461 +(% class="box infomessage" %)
462 +(((
461 461  ✎**Note:**
462 462  
463 463  * Nested patterns of object cycle and sub-function cycles are as follows.
... ... @@ -467,6 +467,7 @@
467 467  ** If the object cycle ends later than the sub-function cycle, the sub-function cycle would be triggered again.
468 468  ** If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.
469 469  * For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
472 +)))
470 470  
471 471  == Slider switch ==
472 472  
... ... @@ -771,6 +771,8 @@
771 771  |(% style="width:277px" %)HDW18|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Minute
772 772  |(% style="width:277px" %)HDW19|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Second
773 773  
777 +(% class="box infomessage" %)
778 +(((
774 774  **✎Note:**
775 775  
776 776  * [Function address (20 words)] need to be HMI internal address;
... ... @@ -777,6 +777,9 @@
777 777  * When the start time and end time of the query are enabled, if the end time is smaller than the start time, the system automatically swaps the start and end times to calculate the span of the query;
778 778  * After manually setting the start time and end time of the query, you need to manually update the data (the default will be automatically updated);
779 779  
785 +
786 +)))
787 +
780 780  **Appearance**
781 781  
782 782  (% style="text-align:center" %)
... ... @@ -926,7 +926,10 @@
926 926  * ...
927 927  * 40=10 means this object display 10th page.
928 928  
937 +(% class="box infomessage" %)
938 +(((
929 929  **✎Note:** Every page contains 50 records.
940 +)))
930 930  
931 931  **Start Time**
932 932  
... ... @@ -1132,6 +1132,8 @@
1132 1132  (% style="text-align:center" %)
1133 1133  [[image:6.Objects_html_ea2cd87aaa6600cd.gif||height="413" width="567" class="img-thumbnail"]]
1134 1134  
1146 +(% class="box infomessage" %)
1147 +(((
1135 1135  (% class="wikigeneratedid" %)
1136 1136  **✎Note:**
1137 1137  
... ... @@ -1138,6 +1138,7 @@
1138 1138  * If the file type is recipe file, modify the value of the address of "Select line" to control the selected line in the display list to the corresponding line. If another file type is selected, this address can only display the selected line (read-only mode).
1139 1139  * For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. The options of them will no longer be displayed in the record.
1140 1140  * For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
1154 +)))
1141 1141  
1142 1142  == **File list** ==
1143 1143  
... ... @@ -1162,7 +1162,10 @@
1162 1162  ** ...
1163 1163  ** If 40=10, the 10th row of object is selected.
1164 1164  
1179 +(% class="box infomessage" %)
1180 +(((
1165 1165  ✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying line No.
1182 +)))
1166 1166  
1167 1167  * **Folder name address:** This is for setting recipe file name, in advance recipe mode.
1168 1168  
... ... @@ -1209,8 +1209,10 @@
1209 1209  (% style="text-align:center" %)
1210 1210  [[image:6.Objects_html_a68643b928e3930.gif||class="img-thumbnail"]]
1211 1211  
1212 -(% class="wikigeneratedid" %)
1229 +(% class="box infomessage" %)
1230 +(((
1213 1213  ✎**Note: **For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
1232 +)))
1214 1214  
1215 1215  == **XY plot** ==
1216 1216  
... ... @@ -1321,7 +1321,10 @@
1321 1321  
1322 1322  The Disc Record displays the data from data source in the form of a disc curve.
1323 1323  
1343 +(% class="box infomessage" %)
1344 +(((
1324 1324  **✎Note: **This function are only supported by HMI+, i series, ie series and ig series.
1346 +)))
1325 1325  
1326 1326  **Source**
1327 1327  
... ... @@ -1335,7 +1335,10 @@
1335 1335  ** **History**: It is in data record area configured by data record. Multiple record groups could be configured, and each record group has multiple channels.
1336 1336  ** **Real Time**: It is in Real-time trend chart configured by data record. Multiple record groups could be configured, and each record group has multiple curve numbers.
1337 1337  
1360 +(% class="box infomessage" %)
1361 +(((
1338 1338  **✎Note: **There must be one of settings (Data record and real-time trend chart) in configurations, otherwise there will be no data in curve buffer.
1363 +)))
1339 1339  
1340 1340  * **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed. After selecting the curve to be displayed, it can set the scale range and scale color of each curve.
1341 1341  * **Enable**: After selecting the corresponding curve number in the status bar and enabling the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
... ... @@ -1369,7 +1369,10 @@
1369 1369  **Function start Address**: Open the sub-screen of the data record query, and the system can automatically allocate the object address of the query screen according to the configured address. When using this component, it will automatically generate buttons for four direction, you can use these four control keys to view the data record display, and automatically create a new sub-screen based on the function start address, the content of the sub-screen is the query setting for span and start time.
1370 1370  When two objects use one function screen at the same time, if the function addresses of the two object are the same, changing the built-in screen will affect the operation of the two display object at the same time. If the function addresses of the two objects are different, the second object with the built-in screen can be displayed normally, and the first object will be displayed abnormally.
1371 1371  
1397 +(% class="box infomessage" %)
1398 +(((
1372 1372  **✎Note: ** When copying Data record display, it is recommended to create a new "function screen" to avoid repeated calls that may cause abnormal functions.
1400 +)))
1373 1373  
1374 1374  **Start time**: Set the start time and conditions for data viewing.
1375 1375  
... ... @@ -1554,7 +1554,10 @@
1554 1554  (% style="text-align:center" %)
1555 1555  [[image:6.Objects_html_9612d7685f349400.gif||class="img-thumbnail"]]
1556 1556  
1585 +(% class="box infomessage" %)
1586 +(((
1557 1557  ✎**Note:** For the "Text" setting, please refer to "[[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]" in "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
1588 +)))
1558 1558  
1559 1559  = **Display** =
1560 1560  
... ... @@ -2379,6 +2379,8 @@
2379 2379  
2380 2380  Coordinate displays the object location on the screen, and size is the length and width of the object.
2381 2381  
2413 +(% class="box infomessage" %)
2414 +(((
2382 2382  **✎Note:**
2383 2383  
2384 2384  * When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
... ... @@ -2390,8 +2390,11 @@
2390 2390  ** REB-USB 100W07M (supports 720p)
2391 2391  ** WX152HD (supports 720p)
2392 2392  ** RMONCAM G200 (supports 720p)
2393 -** ASHU S300 (640*480)
2426 +** ASHU S300 (640*480
2427 +)))
2394 2394  
2429 +* \\
2430 +
2395 2395  == **Camera control** ==
2396 2396  
2397 2397  This is for control camera; This object need to be used with camera display object.
... ... @@ -2881,6 +2881,8 @@
2881 2881  1. **DLL file name: **Select needed dll file. (i.e. dll files provided by users)
2882 2882  1. **Custom address:** Users can add some function address to cooperate with dll file to complete other operations.
2883 2883  
2920 +(% class="box infomessage" %)
2921 +(((
2884 2884  **✎Note:**
2885 2885  
2886 2886  This is a custom-made object that requires the cooperation of WECON software engineers.
... ... @@ -2890,3 +2890,4 @@
2890 2890  * One dll file is used on PC and should be put under the dll_pc folder in the software installation directory.
2891 2891  * One dll file is used in HMI and should be put under the dll_hmi folder in the software installation directory.
2892 2892  * A document for illustrating the dll files.
2931 +)))
XWiki.XWikiComments[0]
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.test
Comment
... ... @@ -1,0 +1,1 @@
1 +{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-1tuen8"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-v9dwdf"/}} this is test message
Date
... ... @@ -1,0 +1,1 @@
1 +2023-07-27 17:16:52.686
XWiki.XWikiComments[1]
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.test
Comment
... ... @@ -1,0 +1,1 @@
1 +{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-54p1l2"/}} hi
Date
... ... @@ -1,0 +1,1 @@
1 +2023-07-27 17:20:52.190
XWiki.XWikiComments[2]
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.test
Comment
... ... @@ -1,0 +1,1 @@
1 +{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-xj75f6"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-le3bx2"/}} 这个应该可以了吧
Date
... ... @@ -1,0 +1,1 @@
1 +2023-07-27 17:23:11.227
XWiki.XWikiComments[3]
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.test
Comment
... ... @@ -1,0 +1,1 @@
1 +hello
Date
... ... @@ -1,0 +1,1 @@
1 +2023-07-27 17:28:36.248
XWiki.XWikiComments[4]
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.test
Comment
... ... @@ -1,0 +1,1 @@
1 +撒反对
Date
... ... @@ -1,0 +1,1 @@
1 +2023-07-27 17:31:30.668
XWiki.XWikiComments[5]
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.test
Comment
... ... @@ -1,0 +1,1 @@
1 +{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-z27h71"/}} 最新的测试
Date
... ... @@ -1,0 +1,1 @@
1 +2023-07-27 17:38:03.653