Skip to Content

Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41
From version 74.1
edited by Jim(Forgotten)
on 2023/08/10 17:18
Change comment: There is no comment for this version
To version 52.2
edited by Karen
on 2023/05/25 11:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Jim
1 +XWiki.Karen
Content
... ... @@ -458,8 +458,6 @@
458 458  * **Run times: **Configuration sub-function execute times. 0 means unlimited times.
459 459  * **Break:** Stop executing sub-function when trigger address is ON.
460 460  
461 -(% class="box infomessage" %)
462 -(((
463 463  ✎**Note:**
464 464  
465 465  * Nested patterns of object cycle and sub-function cycles are as follows.
... ... @@ -469,7 +469,6 @@
469 469  ** If the object cycle ends later than the sub-function cycle, the sub-function cycle would be triggered again.
470 470  ** If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.
471 471  * For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
472 -)))
473 473  
474 474  == Slider switch ==
475 475  
... ... @@ -774,8 +774,6 @@
774 774  |(% style="width:277px" %)HDW18|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Minute
775 775  |(% style="width:277px" %)HDW19|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Second
776 776  
777 -(% class="box infomessage" %)
778 -(((
779 779  **✎Note:**
780 780  
781 781  * [Function address (20 words)] need to be HMI internal address;
... ... @@ -782,9 +782,6 @@
782 782  * When the start time and end time of the query are enabled, if the end time is smaller than the start time, the system automatically swaps the start and end times to calculate the span of the query;
783 783  * After manually setting the start time and end time of the query, you need to manually update the data (the default will be automatically updated);
784 784  
785 -
786 -)))
787 -
788 788  **Appearance**
789 789  
790 790  (% style="text-align:center" %)
... ... @@ -2202,7 +2202,7 @@
2202 2202  The camera configured via ip only supports, turn on, turn off, screenshot basic functions.
2203 2203  )))
2204 2204  
2205 -**EZVIZ Cloud Description**
2197 +**EZVIZ Cloud Descirption**
2206 2206  
2207 2207  (% style="text-align:center" %)
2208 2208  [[image:企业微信截图_1673081149790.png]]
... ... @@ -2308,23 +2308,23 @@
2308 2308  |=(% style="width: 129px;" %)60020|(% style="width:366px" %)Unsupport this command|(% style="width:531px" %)Confirm the device whether supports this operation or not
2309 2309  
2310 2310  (% class="wikigeneratedid" %)
2311 -**Default Configuration**： Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
2303 +**Default Configuration**：Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
2312 2312  
2313 2313  **In the default configuration, the following are required：**
2314 2314  
2315 -**AppKey**： EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
2316 -**Secret**： EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
2317 -**Channel number**： EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
2307 +**AppKey**：EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
2308 +**Secret**：EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
2309 +**Channel number**：EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
2318 2318  
2319 -**S/N： **EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
2311 +**S/N：**EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
2320 2320  
2321 2321  
2322 2322  **In the default configuration, the following are optional:**
2323 2323  
2324 -**IP**： EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
2316 +**IP**：EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
2325 2325  
2326 -**RTSP Port**： EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
2327 -**Verification Code**： EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
2318 +**RTSP Port**：EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
2319 +**Verification Code**：EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
2328 2328  
2329 2329  {{info}}
2330 2330  **✎Note: **The required content in the configuration only supports remote monitoring when the camera screen can be displayed, if there is a demand for the screen side can also display the camera screen, user need to fill in the optional content in the configuration.
... ... @@ -2332,8 +2332,9 @@
2332 2332  
2333 2333  === **USB Camera** ===
2334 2334  
2335 -**(1) General**
2336 2336  
2328 +1. General
2329 +
2337 2337  (% style="text-align:center" %)
2338 2338  [[image:6.Objects_html_6d926ea40f8267c.gif||class="img-thumbnail"]]
2339 2339  
... ... @@ -2350,7 +2350,7 @@
2350 2350  |(% style="width:144px" %)1|(% style="width:700px" %)Enable the screenshot function
2351 2351  |(% style="width:144px" %)2|(% style="width:700px" %)refresh camera display object
2352 2352  
2353 -**Camera state: **It shows the current camera states. It occupies a word address. Different value means different operations, as below table shows:
2346 +**Camera state: **It shows the current camera states. Itoccupies a word address. Different value means different operations, as below table shows:
2354 2354  
2355 2355  (% class="table-bordered" %)
2356 2356  |=**Value**|=**Operation**
... ... @@ -2371,11 +2371,11 @@
2371 2371  
2372 2372  The current screenshots are only allowed on the SD card. When the SD card does not exist the system will cache the latest 10 screenshots.
2373 2373  
2374 -**Picture name: **The name of the image is controlled by the address. The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
2367 +**Picture name: **The name of the image is controlled by the address.The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
2375 2375  
2376 2376  **4) Global screenshot**
2377 2377  
2378 -If this function is enabled, camera display object can perform the screenshot operation when HMI is running and save it as a . BMP image.
2371 +If this function is enable, camera display object can perform the screenshot operation when HMI is running and save it as a .BMP image.
2379 2379  
2380 2380  If this function is disabled, camera display object only performs the screenshot operation when it is displayed on screen.
2381 2381  
... ... @@ -2385,15 +2385,15 @@
2385 2385  
2386 2386  **6) Use resolution size**
2387 2387  
2388 -Coordinate displays the object location on the screen, and size is the length and width of the object.
2381 +Coordinate displays the object location in the screen, and size is the length and width of the object.
2389 2389  
2390 2390  **✎Note:**
2391 2391  
2392 2392  * When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
2393 -* When HMI is displayed horizontally, the USB camera screen displays normally. If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
2386 +* When HMI is displayed horizontally, the USB camera screen displays normally.If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
2394 2394  * One HMI is only allowed to connect with one USB camera device. There is only one USB camera display part in the whole project screen, and the camera display part is not allowed to be placed on the public screen (1002: common Windows).
2395 2395  * Sometimes the USB camera may lose the image because of the influence in the field, then we suggest to PI9000 HMI and the recommended USB camera model.
2396 -* All below USB camera model have been tested by WECON to ensure compatibility.
2389 +* All below USB camera model have been tested by WECON to ensure the compatibility.
2397 2397  * Currently, only PI8000 and PI9000 series support the USB camera function. Recommended USB cameras include:
2398 2398  ** REB-USB 100W07M (supports 720p)
2399 2399  ** WX152HD (supports 720p)
... ... @@ -2402,8 +2402,10 @@
2402 2402  
2403 2403  == **Camera control** ==
2404 2404  
2405 -This is for control camera; This object need to be used with camera display object.
2398 +**Introduction**
2406 2406  
2400 +This is for control camera; this object need to be used with camera display object.
2401 +
2407 2407  **Description**
2408 2408  
2409 2409  (% style="text-align:center" %)
... ... @@ -2413,11 +2413,11 @@
2413 2413  
2414 2414  Read a string from designated system address, and then combine the instruction to control the camera image.
2415 2415  
2416 -When the dynamic control command is disabled, the complete camera control command is entered in order to display the camera contents.
2411 +When the dynamic control command is disabled, the complete camera control command be entered in order to display the camera contents.
2417 2417  
2418 2418  **2) Camera control instruction**
2419 2419  
2420 -This is for entering static instruction for camera so that users can operate camera when HMI running.
2415 +This is for enter static instruction for camera, so that users can operation camera when HMI running;
2421 2421  
2422 2422  **3) Control bit**
2423 2423  
... ... @@ -2429,7 +2429,7 @@
2429 2429  
2430 2430  == **Flow component** ==
2431 2431  
2432 -The flow components are mainly used to reflect the flow state in process flow production. User could set the style of flow components according to requirements.
2427 +The flow components are mainly used to reflect the flow state in process flow production. You could set the style of flow components according to requirements.
2433 2433  
2434 2434  **Description**
2435 2435  
... ... @@ -2449,9 +2449,9 @@
2449 2449  1. **Block width:** It sets block width of flow component.
2450 2450  1. **PipeFrn width: **It sets outer border width of flow component.
2451 2451  1. **Block length: **It sets block length of flow component.
2452 -1. **Transparence:** It sets transparence of flow component. (from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
2453 -1. **Ratio:** It sets the display ratio of block and background (Display density of the block in flow component).
2454 -1. **Speed:** It sets flow speed of the block during HMI running.
2447 +1. **Transparence:** It sets transparence of flow component.(from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
2448 +1. **Ratio:** It sets display ratio of block and background (Display density of the block in flow component).
2449 +1. **Speed:** It setsflow speed of the block during HMI running.
2455 2455  
2456 2456  **(3) Control**
2457 2457  
... ... @@ -2475,9 +2475,9 @@
2475 2475  
2476 2476  == **Printer** ==
2477 2477  
2478 -The printing object is primarily suitable for printing out or screenshots saving when connected to micro printer.
2473 +The printing object is primarily suitable for print out or screenshots saving when connected to micro printer.
2479 2479  
2480 -Printer has two types: serial printer and USB printer. Printf (printext function) should be called when it's used to print fixed message in a script.
2475 +Printer has two types: **serial printer and USB printer**. Printf (printext function) should be called when it's used to print fixed message in a script.
2481 2481  
2482 2482  **Printer protocol**
2483 2483  
... ... @@ -2497,18 +2497,18 @@
2497 2497  **(1) Display settings**
2498 2498  
2499 2499  1. **Direction: **Four direction choices in printing: 0, 90, 180, and 270.
2500 -1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion to paper size.
2495 +1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion with paper size.
2501 2501  
2502 2502  **(2) Trigger mode**
2503 2503  
2504 -1. **Trigger address: **When trigger address turns ON. The printer starts to respond operationally.
2499 +1. **Trigger address: **When trigger address turns ON.Printer starts to respond operation.
2505 2505  1. **Printer\ Save:** It sets operation for this object, printer object could support sending printing command to printer device, and including screenshot.
2506 2506  
2507 2507  **(3) Save path**
2508 2508  
2509 -Valid when the save mode is selected, screenshot the content in printing object area, and save it in specified storage and folder, when trigger address turns ON.
2504 +Valid when the save mode is selected, screenshot the content in printing object area and the save it in specified storage and folder, when trigger address turns ON.
2510 2510  
2511 -Folder: It's available to select an SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture the first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
2506 +Folder: It's available to select SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
2512 2512  
2513 2513  **Related issues**
2514 2514  
... ... @@ -2601,14 +2601,16 @@
2601 2601  
2602 2602  == **Text** ==
2603 2603  
2604 -It adds text to HMI screen, and an object can be displayed in 8 languages (set in "All Languages") with a special address setting.
2599 +It adds text to HMI screen, and a object can be displayed in 8 languages (set in "All Languages") with a special address setting.
2605 2605  
2601 +**Description**
2602 +
2606 2606  (% style="text-align:center" %)
2607 2607  [[image:6.Objects_html_3cae6153cc6e4750.gif||class="img-thumbnail"]]
2608 2608  
2609 2609  **(1) Current state**
2610 2610  
2611 -It is used to switch the object states, but [Text] object only has one state, so this function is invalid.
2608 +It used to switch the object states, but [Text] object only has one state, so this function is invalid.
2612 2612  
2613 2613  **(2) All language**
2614 2614  
... ... @@ -2627,7 +2627,7 @@
2627 2627  
2628 2628  **(5) Text color**
2629 2629  
2630 -It sets color of text in object.
2627 +It sets color for text in object.
2631 2631  
2632 2632  **(6) Text background**
2633 2633  
... ... @@ -2635,8 +2635,10 @@
2635 2635  
2636 2636  == **Table** ==
2637 2637  
2638 -It is displayed in a table format on the HMI screen to meet the display needs of user.
2635 +It is displayed in a table format in the HMI screen to meet the display needs of user.
2639 2639  
2637 +**Description**
2638 +
2640 2640  (% style="text-align:center" %)
2641 2641  [[image:6.Objects_html_2aad7ef679949d71.gif||class="img-thumbnail"]]
2642 2642  
... ... @@ -2649,7 +2649,7 @@
2649 2649  1. **Border:** It sets table line color, including table line and frame line.
2650 2650  1. **Transparence: **It sets the transparency of the object background.
2651 2651  1. **Fill style: **There are two options for it, one is display background, and the other is no background.
2652 -1. **Background:** Valid when selecting display background in "Fill style".
2651 +1. **Background:** Valid when select display background in "Fill style".
2653 2653  
2654 2654  **(2) View**
2655 2655  
... ... @@ -2659,6 +2659,8 @@
2659 2659  
2660 2660  It is displayed in line format in the HMI screen to meet the display needs of user.
2661 2661  
2661 +**Description**
2662 +
2662 2662  (% style="text-align:center" %)
2663 2663  [[image:6.Objects_html_795af47bf0ad8529.gif||class="img-thumbnail"]]
2664 2664  
... ... @@ -2676,7 +2676,7 @@
2676 2676  
2677 2677  **(3) Coordinate control**
2678 2678  
2679 -Dynamically set the position coordinate between two points in line. Set four addresses respectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
2680 +Dynamically set the position coordinate between two points in line. Set four addressesrespectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
2680 2680  
2681 2681  **(4) Color control**
2682 2682  
... ... @@ -2688,10 +2688,12 @@
2688 2688  
2689 2689  == **Polygon** ==
2690 2690  
2691 -It is displayed in polygon format on the HMI screen to meet the display needs of user.
2692 +It is displayed in polygon format in the HMI screen to meet the display needs of user.
2692 2692  
2693 2693  Right click to close polygon and then complete the creation procedure. Select the polygon, then click its point position to change its vertex coordinate after it is created.
2694 2694  
2696 +**Description**
2697 +
2695 2695  (% style="text-align:center" %)
2696 2696  [[image:6.Objects_html_9f46a2daf3b48e68.gif||class="img-thumbnail"]]
2697 2697  
... ... @@ -2700,7 +2700,7 @@
2700 2700  1. **Border color: **It sets border line color.
2701 2701  1. **Border type:** It sets border line type.
2702 2702  1. **Border width: **It sets border line width.
2703 -1. **Transparence: **It sets the transparency of the object's background.
2706 +1. **Transparence: **It sets the transparency of the object background.
2704 2704  1. **Coordinate editing:** It changes coordinate for all points in this object, as below shows.
2705 2705  
2706 2706  (% style="text-align:center" %)
... ... @@ -2724,8 +2724,10 @@
2724 2724  
2725 2725  == **Cycle/ Ellipse** ==
2726 2726  
2727 -It is displayed as cycle on HMI screen to meet the display needs of user.
2730 +It is displayed as cycle in HMI screen to meet the display needs of user.
2728 2728  
2732 +**Description**
2733 +
2729 2729  (% style="text-align:center" %)
2730 2730  [[image:6.Objects_html_1851aaa90af6ee72.gif||class="img-thumbnail"]]
2731 2731  
... ... @@ -2735,8 +2735,8 @@
2735 2735  1. **Frame width: **It sets border line type.
2736 2736  1. **Frame type: **It sets border line width
2737 2737  1. **Pattern: **It sets background type, there are four types.
2738 -1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern]
2739 -1. **Transparence:** It sets the transparency of the object's background.
2743 +1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern]
2744 +1. **Transparence:** It sets the transparency of the object background.
2740 2740  
2741 2741  **2) Transparence control**
2742 2742  
... ... @@ -2744,7 +2744,7 @@
2744 2744  
2745 2745  **3) Cycle**
2746 2746  
2747 -Check if it is for circle; uncheck it for ellipse.
2752 +Check if for circle; uncheck it for ellipse.
2748 2748  
2749 2749  **4) Color control**
2750 2750  
... ... @@ -2770,6 +2770,7 @@
2770 2770  
2771 2771  **2) Display settings**
2772 2772  
2778 +
2773 2773  (% style="text-align:center" %)
2774 2774  [[image:6.Objects_html_4729b28f315a5a9b.gif||class="img-thumbnail"]]
2775 2775  
... ... @@ -2778,7 +2778,7 @@
2778 2778  1. **Line width: **It sets border line type.
2779 2779  1. **Fill style: **It sets background type, there are four types.
2780 2780  1. **Transparence:** It sets the transparency of the object background.
2781 -1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern].
2787 +1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern].
2782 2782  
2783 2783  **(3) Only show arc**
2784 2784  
... ... @@ -2804,6 +2804,8 @@
2804 2804  
2805 2805  The line segments are linked end-to-end to form a broken line, whose vertex coordinate can be modified by drafting, just like polygon.
2806 2806  
2813 +**Description**
2814 +
2807 2807  (% style="text-align:center" %)
2808 2808  [[image:6.Objects_html_c3b0de1d4c2fe745.gif||class="img-thumbnail"]]
2809 2809  
... ... @@ -2826,7 +2826,7 @@
2826 2826  
2827 2827  In basic display settings, the line width can't be changed, but user can change width by address.
2828 2828  
2829 -Read the numerical value of address to control the width of line. Display range of numerical value:1-10.
2837 +Read the numerical value of address to control the width of line.Display range of numerical value:1-10.
2830 2830  
2831 2831  **(4) View**
2832 2832  
... ... @@ -2836,6 +2836,8 @@
2836 2836  
2837 2837  The linear scale is a linear scale that draws the specified area with a bisector. The specific scale of the scale can be marked with static text.
2838 2838  
2847 +**Description**
2848 +
2839 2839  (% style="text-align:center" %)
2840 2840  [[image:6.Objects_html_b604bd83c8b8b6d1.gif||class="img-thumbnail"]]
2841 2841  
... ... @@ -2843,12 +2843,12 @@
2843 2843  
2844 2844  1. **Line color:** It sets all line in object (including main and sub scale).
2845 2845  1. **Display direction: **It provides four modes for display.
2846 -1. **Main scale: **It sets the cell of the main scale.
2856 +1. **Main scale:**It sets the cell of the main scale.
2847 2847  1. **Sub scale:** It sets the cell of sub scale for every main scale.
2848 2848  
2849 2849  **(2) View**
2850 2850  
2851 -It is for preview object.
2861 +It is for preview object;
2852 2852  
2853 2853  == **Arc scale** ==
2854 2854  
... ... @@ -2882,15 +2882,15 @@
2882 2882  
2883 2883  Customized object is provided for users to design the universal interface of object freely to meet customization requirements.
2884 2884  
2895 +**Description**
2896 +
2885 2885  (% style="text-align:center" %)
2886 2886  [[image:6.Objects_html_c8146ad79a9ce732.gif||class="img-thumbnail"]]
2887 2887  
2888 -1. **Function Address:** The numerical value in this address is used as the function code of object to handle the corresponding operation.
2889 -1. **DLL file name: **Select needed dll file. (i.e. dll files provided by users)
2890 -1. **Custom address:** Users can add some function address to cooperate with dll file to complete other operations.
2900 +1. **Function Address:** the numerical value in this address is used as the function code of object to handle the corresponding operation.
2901 +1. **DLL file name: **Select needed dll file (i.e. dll files provided by users)
2902 +1. **Custom address:** users can add some function address to cooperate with dll file to complete other operations
2891 2891  
2892 -(% class="box infomessage" %)
2893 -(((
2894 2894  **✎Note:**
2895 2895  
2896 2896  This is a custom-made object that requires the cooperation of WECON software engineers.
... ... @@ -2897,7 +2897,6 @@
2897 2897  
2898 2898  Required documents: two XXXXXX.dll files and an document.
2899 2899  
2900 -* One dll file is used on PC and should be put under the dll_pc folder in the software installation directory.
2910 +* One dll file is used in PC and should be put under the dll_pc folder in the software installation directory.
2901 2901  * One dll file is used in HMI and should be put under the dll_hmi folder in the software installation directory.
2902 2902  * A document for illustrating the dll files.
2903 -)))
XWiki.XWikiComments[0]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-1tuen8"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-v9dwdf"/}} this is test message
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:16:52.686
XWiki.XWikiComments[1]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-54p1l2"/}} hi
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:20:52.190
XWiki.XWikiComments[2]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-xj75f6"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-le3bx2"/}} 这个应该可以了吧
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:23:11.227
XWiki.XWikiComments[3]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -hello
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:28:36.248
XWiki.XWikiComments[4]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -撒反对
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:31:30.668
XWiki.XWikiComments[5]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-z27h71"/}} 最新的测试
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:38:03.653