Skip to Content

Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41
From version 78.1
edited by Jim(Forgotten)
on 2023/08/10 17:30
Change comment: There is no comment for this version
To version 52.2
edited by Karen
on 2023/05/25 11:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Jim
1 +XWiki.Karen
Content
... ... @@ -458,8 +458,6 @@
458 458  * **Run times: **Configuration sub-function execute times. 0 means unlimited times.
459 459  * **Break:** Stop executing sub-function when trigger address is ON.
460 460  
461 -(% class="box infomessage" %)
462 -(((
463 463  ✎**Note:**
464 464  
465 465  * Nested patterns of object cycle and sub-function cycles are as follows.
... ... @@ -469,7 +469,6 @@
469 469  ** If the object cycle ends later than the sub-function cycle, the sub-function cycle would be triggered again.
470 470  ** If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.
471 471  * For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
472 -)))
473 473  
474 474  == Slider switch ==
475 475  
... ... @@ -774,8 +774,6 @@
774 774  |(% style="width:277px" %)HDW18|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Minute
775 775  |(% style="width:277px" %)HDW19|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Second
776 776  
777 -(% class="box infomessage" %)
778 -(((
779 779  **✎Note:**
780 780  
781 781  * [Function address (20 words)] need to be HMI internal address;
... ... @@ -782,9 +782,6 @@
782 782  * When the start time and end time of the query are enabled, if the end time is smaller than the start time, the system automatically swaps the start and end times to calculate the span of the query;
783 783  * After manually setting the start time and end time of the query, you need to manually update the data (the default will be automatically updated);
784 784  
785 -
786 -)))
787 -
788 788  **Appearance**
789 789  
790 790  (% style="text-align:center" %)
... ... @@ -934,10 +934,7 @@
934 934  * ...
935 935  * 40=10 means this object display 10th page.
936 936  
937 -(% class="box infomessage" %)
938 -(((
939 939  **✎Note:** Every page contains 50 records.
940 -)))
941 941  
942 942  **Start Time**
943 943  
... ... @@ -1143,8 +1143,6 @@
1143 1143  (% style="text-align:center" %)
1144 1144  [[image:6.Objects_html_ea2cd87aaa6600cd.gif||height="413" width="567" class="img-thumbnail"]]
1145 1145  
1146 -(% class="box infomessage" %)
1147 -(((
1148 1148  (% class="wikigeneratedid" %)
1149 1149  **✎Note:**
1150 1150  
... ... @@ -1151,7 +1151,6 @@
1151 1151  * If the file type is recipe file, modify the value of the address of "Select line" to control the selected line in the display list to the corresponding line. If another file type is selected, this address can only display the selected line (read-only mode).
1152 1152  * For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. The options of them will no longer be displayed in the record.
1153 1153  * For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
1154 -)))
1155 1155  
1156 1156  == **File list** ==
1157 1157  
... ... @@ -1176,10 +1176,7 @@
1176 1176  ** ...
1177 1177  ** If 40=10, the 10th row of object is selected.
1178 1178  
1179 -(% class="box infomessage" %)
1180 -(((
1181 1181  ✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying line No.
1182 -)))
1183 1183  
1184 1184  * **Folder name address:** This is for setting recipe file name, in advance recipe mode.
1185 1185  
... ... @@ -2211,7 +2211,7 @@
2211 2211  The camera configured via ip only supports, turn on, turn off, screenshot basic functions.
2212 2212  )))
2213 2213  
2214 -**EZVIZ Cloud Description**
2197 +**EZVIZ Cloud Descirption**
2215 2215  
2216 2216  (% style="text-align:center" %)
2217 2217  [[image:企业微信截图_1673081149790.png]]
... ... @@ -2317,23 +2317,23 @@
2317 2317  |=(% style="width: 129px;" %)60020|(% style="width:366px" %)Unsupport this command|(% style="width:531px" %)Confirm the device whether supports this operation or not
2318 2318  
2319 2319  (% class="wikigeneratedid" %)
2320 -**Default Configuration**： Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
2303 +**Default Configuration**：Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
2321 2321  
2322 2322  **In the default configuration, the following are required：**
2323 2323  
2324 -**AppKey**： EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
2325 -**Secret**： EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
2326 -**Channel number**： EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
2307 +**AppKey**：EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
2308 +**Secret**：EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
2309 +**Channel number**：EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
2327 2327  
2328 -**S/N： **EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
2311 +**S/N：**EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
2329 2329  
2330 2330  
2331 2331  **In the default configuration, the following are optional:**
2332 2332  
2333 -**IP**： EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
2316 +**IP**：EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
2334 2334  
2335 -**RTSP Port**： EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
2336 -**Verification Code**： EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
2318 +**RTSP Port**：EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
2319 +**Verification Code**：EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
2337 2337  
2338 2338  {{info}}
2339 2339  **✎Note: **The required content in the configuration only supports remote monitoring when the camera screen can be displayed, if there is a demand for the screen side can also display the camera screen, user need to fill in the optional content in the configuration.
... ... @@ -2341,8 +2341,9 @@
2341 2341  
2342 2342  === **USB Camera** ===
2343 2343  
2344 -**(1) General**
2345 2345  
2328 +1. General
2329 +
2346 2346  (% style="text-align:center" %)
2347 2347  [[image:6.Objects_html_6d926ea40f8267c.gif||class="img-thumbnail"]]
2348 2348  
... ... @@ -2359,7 +2359,7 @@
2359 2359  |(% style="width:144px" %)1|(% style="width:700px" %)Enable the screenshot function
2360 2360  |(% style="width:144px" %)2|(% style="width:700px" %)refresh camera display object
2361 2361  
2362 -**Camera state: **It shows the current camera states. It occupies a word address. Different value means different operations, as below table shows:
2346 +**Camera state: **It shows the current camera states. Itoccupies a word address. Different value means different operations, as below table shows:
2363 2363  
2364 2364  (% class="table-bordered" %)
2365 2365  |=**Value**|=**Operation**
... ... @@ -2380,11 +2380,11 @@
2380 2380  
2381 2381  The current screenshots are only allowed on the SD card. When the SD card does not exist the system will cache the latest 10 screenshots.
2382 2382  
2383 -**Picture name: **The name of the image is controlled by the address. The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
2367 +**Picture name: **The name of the image is controlled by the address.The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
2384 2384  
2385 2385  **4) Global screenshot**
2386 2386  
2387 -If this function is enabled, camera display object can perform the screenshot operation when HMI is running and save it as a . BMP image.
2371 +If this function is enable, camera display object can perform the screenshot operation when HMI is running and save it as a .BMP image.
2388 2388  
2389 2389  If this function is disabled, camera display object only performs the screenshot operation when it is displayed on screen.
2390 2390  
... ... @@ -2394,30 +2394,27 @@
2394 2394  
2395 2395  **6) Use resolution size**
2396 2396  
2397 -Coordinate displays the object location on the screen, and size is the length and width of the object.
2381 +Coordinate displays the object location in the screen, and size is the length and width of the object.
2398 2398  
2399 -(% class="box infomessage" %)
2400 -(((
2401 2401  **✎Note:**
2402 2402  
2403 2403  * When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
2404 -* When HMI is displayed horizontally, the USB camera screen displays normally. If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
2386 +* When HMI is displayed horizontally, the USB camera screen displays normally.If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
2405 2405  * One HMI is only allowed to connect with one USB camera device. There is only one USB camera display part in the whole project screen, and the camera display part is not allowed to be placed on the public screen (1002: common Windows).
2406 2406  * Sometimes the USB camera may lose the image because of the influence in the field, then we suggest to PI9000 HMI and the recommended USB camera model.
2407 -* All below USB camera model have been tested by WECON to ensure compatibility.
2389 +* All below USB camera model have been tested by WECON to ensure the compatibility.
2408 2408  * Currently, only PI8000 and PI9000 series support the USB camera function. Recommended USB cameras include:
2409 2409  ** REB-USB 100W07M (supports 720p)
2410 2410  ** WX152HD (supports 720p)
2411 2411  ** RMONCAM G200 (supports 720p)
2412 -** ASHU S300 (640*480
2413 -)))
2394 +** ASHU S300 (640*480)
2414 2414  
2415 -* \\
2416 -
2417 2417  == **Camera control** ==
2418 2418  
2419 -This is for control camera; This object need to be used with camera display object.
2398 +**Introduction**
2420 2420  
2400 +This is for control camera; this object need to be used with camera display object.
2401 +
2421 2421  **Description**
2422 2422  
2423 2423  (% style="text-align:center" %)
... ... @@ -2427,11 +2427,11 @@
2427 2427  
2428 2428  Read a string from designated system address, and then combine the instruction to control the camera image.
2429 2429  
2430 -When the dynamic control command is disabled, the complete camera control command is entered in order to display the camera contents.
2411 +When the dynamic control command is disabled, the complete camera control command be entered in order to display the camera contents.
2431 2431  
2432 2432  **2) Camera control instruction**
2433 2433  
2434 -This is for entering static instruction for camera so that users can operate camera when HMI running.
2415 +This is for enter static instruction for camera, so that users can operation camera when HMI running;
2435 2435  
2436 2436  **3) Control bit**
2437 2437  
... ... @@ -2443,7 +2443,7 @@
2443 2443  
2444 2444  == **Flow component** ==
2445 2445  
2446 -The flow components are mainly used to reflect the flow state in process flow production. User could set the style of flow components according to requirements.
2427 +The flow components are mainly used to reflect the flow state in process flow production. You could set the style of flow components according to requirements.
2447 2447  
2448 2448  **Description**
2449 2449  
... ... @@ -2463,9 +2463,9 @@
2463 2463  1. **Block width:** It sets block width of flow component.
2464 2464  1. **PipeFrn width: **It sets outer border width of flow component.
2465 2465  1. **Block length: **It sets block length of flow component.
2466 -1. **Transparence:** It sets transparence of flow component. (from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
2467 -1. **Ratio:** It sets the display ratio of block and background (Display density of the block in flow component).
2468 -1. **Speed:** It sets flow speed of the block during HMI running.
2447 +1. **Transparence:** It sets transparence of flow component.(from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
2448 +1. **Ratio:** It sets display ratio of block and background (Display density of the block in flow component).
2449 +1. **Speed:** It setsflow speed of the block during HMI running.
2469 2469  
2470 2470  **(3) Control**
2471 2471  
... ... @@ -2489,9 +2489,9 @@
2489 2489  
2490 2490  == **Printer** ==
2491 2491  
2492 -The printing object is primarily suitable for printing out or screenshots saving when connected to micro printer.
2473 +The printing object is primarily suitable for print out or screenshots saving when connected to micro printer.
2493 2493  
2494 -Printer has two types: serial printer and USB printer. Printf (printext function) should be called when it's used to print fixed message in a script.
2475 +Printer has two types: **serial printer and USB printer**. Printf (printext function) should be called when it's used to print fixed message in a script.
2495 2495  
2496 2496  **Printer protocol**
2497 2497  
... ... @@ -2511,18 +2511,18 @@
2511 2511  **(1) Display settings**
2512 2512  
2513 2513  1. **Direction: **Four direction choices in printing: 0, 90, 180, and 270.
2514 -1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion to paper size.
2495 +1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion with paper size.
2515 2515  
2516 2516  **(2) Trigger mode**
2517 2517  
2518 -1. **Trigger address: **When trigger address turns ON. The printer starts to respond operationally.
2499 +1. **Trigger address: **When trigger address turns ON.Printer starts to respond operation.
2519 2519  1. **Printer\ Save:** It sets operation for this object, printer object could support sending printing command to printer device, and including screenshot.
2520 2520  
2521 2521  **(3) Save path**
2522 2522  
2523 -Valid when the save mode is selected, screenshot the content in printing object area, and save it in specified storage and folder, when trigger address turns ON.
2504 +Valid when the save mode is selected, screenshot the content in printing object area and the save it in specified storage and folder, when trigger address turns ON.
2524 2524  
2525 -Folder: It's available to select an SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture the first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
2506 +Folder: It's available to select SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
2526 2526  
2527 2527  **Related issues**
2528 2528  
... ... @@ -2615,14 +2615,16 @@
2615 2615  
2616 2616  == **Text** ==
2617 2617  
2618 -It adds text to HMI screen, and an object can be displayed in 8 languages (set in "All Languages") with a special address setting.
2599 +It adds text to HMI screen, and a object can be displayed in 8 languages (set in "All Languages") with a special address setting.
2619 2619  
2601 +**Description**
2602 +
2620 2620  (% style="text-align:center" %)
2621 2621  [[image:6.Objects_html_3cae6153cc6e4750.gif||class="img-thumbnail"]]
2622 2622  
2623 2623  **(1) Current state**
2624 2624  
2625 -It is used to switch the object states, but [Text] object only has one state, so this function is invalid.
2608 +It used to switch the object states, but [Text] object only has one state, so this function is invalid.
2626 2626  
2627 2627  **(2) All language**
2628 2628  
... ... @@ -2641,7 +2641,7 @@
2641 2641  
2642 2642  **(5) Text color**
2643 2643  
2644 -It sets color of text in object.
2627 +It sets color for text in object.
2645 2645  
2646 2646  **(6) Text background**
2647 2647  
... ... @@ -2649,8 +2649,10 @@
2649 2649  
2650 2650  == **Table** ==
2651 2651  
2652 -It is displayed in a table format on the HMI screen to meet the display needs of user.
2635 +It is displayed in a table format in the HMI screen to meet the display needs of user.
2653 2653  
2637 +**Description**
2638 +
2654 2654  (% style="text-align:center" %)
2655 2655  [[image:6.Objects_html_2aad7ef679949d71.gif||class="img-thumbnail"]]
2656 2656  
... ... @@ -2663,7 +2663,7 @@
2663 2663  1. **Border:** It sets table line color, including table line and frame line.
2664 2664  1. **Transparence: **It sets the transparency of the object background.
2665 2665  1. **Fill style: **There are two options for it, one is display background, and the other is no background.
2666 -1. **Background:** Valid when selecting display background in "Fill style".
2651 +1. **Background:** Valid when select display background in "Fill style".
2667 2667  
2668 2668  **(2) View**
2669 2669  
... ... @@ -2673,6 +2673,8 @@
2673 2673  
2674 2674  It is displayed in line format in the HMI screen to meet the display needs of user.
2675 2675  
2661 +**Description**
2662 +
2676 2676  (% style="text-align:center" %)
2677 2677  [[image:6.Objects_html_795af47bf0ad8529.gif||class="img-thumbnail"]]
2678 2678  
... ... @@ -2690,7 +2690,7 @@
2690 2690  
2691 2691  **(3) Coordinate control**
2692 2692  
2693 -Dynamically set the position coordinate between two points in line. Set four addresses respectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
2680 +Dynamically set the position coordinate between two points in line. Set four addressesrespectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
2694 2694  
2695 2695  **(4) Color control**
2696 2696  
... ... @@ -2702,10 +2702,12 @@
2702 2702  
2703 2703  == **Polygon** ==
2704 2704  
2705 -It is displayed in polygon format on the HMI screen to meet the display needs of user.
2692 +It is displayed in polygon format in the HMI screen to meet the display needs of user.
2706 2706  
2707 2707  Right click to close polygon and then complete the creation procedure. Select the polygon, then click its point position to change its vertex coordinate after it is created.
2708 2708  
2696 +**Description**
2697 +
2709 2709  (% style="text-align:center" %)
2710 2710  [[image:6.Objects_html_9f46a2daf3b48e68.gif||class="img-thumbnail"]]
2711 2711  
... ... @@ -2714,7 +2714,7 @@
2714 2714  1. **Border color: **It sets border line color.
2715 2715  1. **Border type:** It sets border line type.
2716 2716  1. **Border width: **It sets border line width.
2717 -1. **Transparence: **It sets the transparency of the object's background.
2706 +1. **Transparence: **It sets the transparency of the object background.
2718 2718  1. **Coordinate editing:** It changes coordinate for all points in this object, as below shows.
2719 2719  
2720 2720  (% style="text-align:center" %)
... ... @@ -2738,8 +2738,10 @@
2738 2738  
2739 2739  == **Cycle/ Ellipse** ==
2740 2740  
2741 -It is displayed as cycle on HMI screen to meet the display needs of user.
2730 +It is displayed as cycle in HMI screen to meet the display needs of user.
2742 2742  
2732 +**Description**
2733 +
2743 2743  (% style="text-align:center" %)
2744 2744  [[image:6.Objects_html_1851aaa90af6ee72.gif||class="img-thumbnail"]]
2745 2745  
... ... @@ -2749,8 +2749,8 @@
2749 2749  1. **Frame width: **It sets border line type.
2750 2750  1. **Frame type: **It sets border line width
2751 2751  1. **Pattern: **It sets background type, there are four types.
2752 -1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern]
2753 -1. **Transparence:** It sets the transparency of the object's background.
2743 +1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern]
2744 +1. **Transparence:** It sets the transparency of the object background.
2754 2754  
2755 2755  **2) Transparence control**
2756 2756  
... ... @@ -2758,7 +2758,7 @@
2758 2758  
2759 2759  **3) Cycle**
2760 2760  
2761 -Check if it is for circle; uncheck it for ellipse.
2752 +Check if for circle; uncheck it for ellipse.
2762 2762  
2763 2763  **4) Color control**
2764 2764  
... ... @@ -2784,6 +2784,7 @@
2784 2784  
2785 2785  **2) Display settings**
2786 2786  
2778 +
2787 2787  (% style="text-align:center" %)
2788 2788  [[image:6.Objects_html_4729b28f315a5a9b.gif||class="img-thumbnail"]]
2789 2789  
... ... @@ -2792,7 +2792,7 @@
2792 2792  1. **Line width: **It sets border line type.
2793 2793  1. **Fill style: **It sets background type, there are four types.
2794 2794  1. **Transparence:** It sets the transparency of the object background.
2795 -1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern].
2787 +1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern].
2796 2796  
2797 2797  **(3) Only show arc**
2798 2798  
... ... @@ -2818,6 +2818,8 @@
2818 2818  
2819 2819  The line segments are linked end-to-end to form a broken line, whose vertex coordinate can be modified by drafting, just like polygon.
2820 2820  
2813 +**Description**
2814 +
2821 2821  (% style="text-align:center" %)
2822 2822  [[image:6.Objects_html_c3b0de1d4c2fe745.gif||class="img-thumbnail"]]
2823 2823  
... ... @@ -2840,7 +2840,7 @@
2840 2840  
2841 2841  In basic display settings, the line width can't be changed, but user can change width by address.
2842 2842  
2843 -Read the numerical value of address to control the width of line. Display range of numerical value:1-10.
2837 +Read the numerical value of address to control the width of line.Display range of numerical value:1-10.
2844 2844  
2845 2845  **(4) View**
2846 2846  
... ... @@ -2850,6 +2850,8 @@
2850 2850  
2851 2851  The linear scale is a linear scale that draws the specified area with a bisector. The specific scale of the scale can be marked with static text.
2852 2852  
2847 +**Description**
2848 +
2853 2853  (% style="text-align:center" %)
2854 2854  [[image:6.Objects_html_b604bd83c8b8b6d1.gif||class="img-thumbnail"]]
2855 2855  
... ... @@ -2857,12 +2857,12 @@
2857 2857  
2858 2858  1. **Line color:** It sets all line in object (including main and sub scale).
2859 2859  1. **Display direction: **It provides four modes for display.
2860 -1. **Main scale: **It sets the cell of the main scale.
2856 +1. **Main scale:**It sets the cell of the main scale.
2861 2861  1. **Sub scale:** It sets the cell of sub scale for every main scale.
2862 2862  
2863 2863  **(2) View**
2864 2864  
2865 -It is for preview object.
2861 +It is for preview object;
2866 2866  
2867 2867  == **Arc scale** ==
2868 2868  
... ... @@ -2896,15 +2896,15 @@
2896 2896  
2897 2897  Customized object is provided for users to design the universal interface of object freely to meet customization requirements.
2898 2898  
2895 +**Description**
2896 +
2899 2899  (% style="text-align:center" %)
2900 2900  [[image:6.Objects_html_c8146ad79a9ce732.gif||class="img-thumbnail"]]
2901 2901  
2902 -1. **Function Address:** The numerical value in this address is used as the function code of object to handle the corresponding operation.
2903 -1. **DLL file name: **Select needed dll file. (i.e. dll files provided by users)
2904 -1. **Custom address:** Users can add some function address to cooperate with dll file to complete other operations.
2900 +1. **Function Address:** the numerical value in this address is used as the function code of object to handle the corresponding operation.
2901 +1. **DLL file name: **Select needed dll file (i.e. dll files provided by users)
2902 +1. **Custom address:** users can add some function address to cooperate with dll file to complete other operations
2905 2905  
2906 -(% class="box infomessage" %)
2907 -(((
2908 2908  **✎Note:**
2909 2909  
2910 2910  This is a custom-made object that requires the cooperation of WECON software engineers.
... ... @@ -2911,7 +2911,6 @@
2911 2911  
2912 2912  Required documents: two XXXXXX.dll files and an document.
2913 2913  
2914 -* One dll file is used on PC and should be put under the dll_pc folder in the software installation directory.
2910 +* One dll file is used in PC and should be put under the dll_pc folder in the software installation directory.
2915 2915  * One dll file is used in HMI and should be put under the dll_hmi folder in the software installation directory.
2916 2916  * A document for illustrating the dll files.
2917 -)))
XWiki.XWikiComments[0]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-1tuen8"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-v9dwdf"/}} this is test message
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:16:52.686
XWiki.XWikiComments[1]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-54p1l2"/}} hi
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:20:52.190
XWiki.XWikiComments[2]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-xj75f6"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-le3bx2"/}} 这个应该可以了吧
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:23:11.227
XWiki.XWikiComments[3]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -hello
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:28:36.248
XWiki.XWikiComments[4]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -撒反对
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:31:30.668
XWiki.XWikiComments[5]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-z27h71"/}} 最新的测试
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:38:03.653