Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41

From 47.1 to 46.2 From 87.2 to 87.1

From version 87.1

edited by Mora Zhou
on 2023/10/31 15:50

Change comment: There is no comment for this version

To version 47.1

edited by Karen
on 2023/05/25 09:35

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Objects (0 modified, 0 added, 6 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Mora
++XWiki.Karen

Content

@@ -103,19 +103,6 @@
  (% style="text-align:center" %)
  [[image:位开关 6.png||class="img-thumbnail"]]
--**No trigger:** No way to trigger
--
--**Trigger before pressing:** Trigger bit address is set to 1 before pressing
--
--**Trigger after pressing: **After pressing Enter, trigger bit address is set to 1 before closing the keyboard
--
--**Trigger and reset before pressing: **Trigger bit address is set to 1 and then set to 0 bedore pressing
--
--**Trigger and reset after pressing: **After pressing Enter, trigger bit address is set to 1 and then set to 0 before closing the keyboard
--
--**Trigger before pressing, reset after: **Trigger bit address is set to 1 before pressing; After pressing Enter, trigger bit address is set to 0 before closing the keyboard
--
--
  **Access denied setting**
  Users can set enable password for object. There are following operating setting when user permissions are insufficient. But "Pop login screen" and "Hide object" are mutually exclusive.
@@ -471,8 +471,6 @@
  * **Run times: **Configuration sub-function execute times. 0 means unlimited times.
  * **Break:** Stop executing sub-function when trigger address is ON.
--(% class="box infomessage" %)
--(((
  ✎**Note:**
  * Nested patterns of object cycle and sub-function cycles are as follows.
@@ -482,7 +482,6 @@
  ** If the object cycle ends later than the sub-function cycle, the sub-function cycle would be triggered again.
  ** If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.
  * For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
  == Slider switch ==
@@ -787,8 +787,6 @@
  |(% style="width:277px" %)HDW18|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Minute
  |(% style="width:277px" %)HDW19|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Second
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * [Function address (20 words)] need to be HMI internal address;
@@ -795,9 +795,6 @@
  * When the start time and end time of the query are enabled, if the end time is smaller than the start time, the system automatically swaps the start and end times to calculate the span of the query;
  * After manually setting the start time and end time of the query, you need to manually update the data (the default will be automatically updated);
--
--)))
--
  **Appearance**
  (% style="text-align:center" %)
@@ -947,10 +947,7 @@
  * ...
  * 40=10 means this object display 10th page.
--(% class="box infomessage" %)
--(((
  **✎Note:** Every page contains 50 records.
--)))
  **Start Time**
@@ -1156,8 +1156,6 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_ea2cd87aaa6600cd.gif||height="413" width="567" class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
  (% class="wikigeneratedid" %)
  **✎Note:**
@@ -1164,7 +1164,6 @@
  * If the file type is recipe file, modify the value of the address of "Select line" to control the selected line in the display list to the corresponding line. If another file type is selected, this address can only display the selected line (read-only mode).
  * For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. The options of them will no longer be displayed in the record.
  * For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
--)))
  == **File list** ==
@@ -1189,10 +1189,7 @@
  ** ...
  ** If 40=10, the 10th row of object is selected.
--(% class="box infomessage" %)
--(((
  ✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying line No.
--)))
  * **Folder name address:** This is for setting recipe file name, in advance recipe mode.
@@ -1239,10 +1239,8 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_a68643b928e3930.gif||class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
++(% class="wikigeneratedid" %)
  ✎**Note: **For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
--)))
  == **XY plot** ==
@@ -1353,10 +1353,7 @@
  The Disc Record displays the data from data source in the form of a disc curve.
--(% class="box infomessage" %)
--(((
  **✎Note: **This function are only supported by HMI+, i series, ie series and ig series.
--)))
  **Source**
@@ -1370,10 +1370,7 @@
  ** **History**: It is in data record area configured by data record. Multiple record groups could be configured, and each record group has multiple channels.
  ** **Real Time**: It is in Real-time trend chart configured by data record. Multiple record groups could be configured, and each record group has multiple curve numbers.
--(% class="box infomessage" %)
--(((
  **✎Note: **There must be one of settings (Data record and real-time trend chart) in configurations, otherwise there will be no data in curve buffer.
--)))
  * **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed. After selecting the curve to be displayed, it can set the scale range and scale color of each curve.
  * **Enable**: After selecting the corresponding curve number in the status bar and enabling the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
@@ -1407,10 +1407,7 @@
  **Function start Address**: Open the sub-screen of the data record query, and the system can automatically allocate the object address of the query screen according to the configured address. When using this component, it will automatically generate buttons for four direction, you can use these four control keys to view the data record display, and automatically create a new sub-screen based on the function start address, the content of the sub-screen is the query setting for span and start time.
  When two objects use one function screen at the same time, if the function addresses of the two object are the same, changing the built-in screen will affect the operation of the two display object at the same time. If the function addresses of the two objects are different, the second object with the built-in screen can be displayed normally, and the first object will be displayed abnormally.
--(% class="box infomessage" %)
--(((
  **✎Note: ** When copying Data record display, it is recommended to create a new "function screen" to avoid repeated calls that may cause abnormal functions.
--)))
  **Start time**: Set the start time and conditions for data viewing.
@@ -1595,10 +1595,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_9612d7685f349400.gif||class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
  ✎**Note:** For the "Text" setting, please refer to "[[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]" in "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--)))
  = **Display** =
@@ -1661,14 +1661,11 @@
 . **Variable QR:** It is for setting read address, the content of QR code is from this setting address.
 . **QR String: **It is for set static content for QR code.
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * HMI machine ID address: HSW10494 ~~ HSW10558.
  * So if user want to use QR code to display machine ID on project screen, please check "Variable QR", and set address is HSW10494.
  * When scanning the QR code by APP to monitor HMI, the default access password is 888888.
--)))
  == **Picture** ==
@@ -1693,17 +1693,14 @@
  This is advanced function of picture object; user can change display picture when HMI is running. The supported formats are bmp, jpg, png, jpeg. This feature is unavailable for offline and online simulation.
--1. **Root: **Set the save location of the picture, which can be set to U disk,SD card,but could not be set to Flash.
++1. **Root: **Set the save location of the picture,which can be set to U disk,SD card,but could not be set to Flash.
 . **Folder: **Set the name of the folder where the picture is located.The folder name can be up to 31 characters. （Note：The picture must be stored in the U disk folder and cannot be stored in the root directory of the U disk.）
--1. **File address: **16 consecutive addresses enter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.
++1. **File address: **16 consecutive addressesenter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.
--(% class="box infomessage" %)
--(((
  ✎**Note:**
 . The image could be displayed in BMP, JPG, PNG, and JPEG formats. Images with a resolution of 1920 x 1080 or higher are not supported.
 . For the setting of [[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
  == **Rotation picture** ==
@@ -1731,7 +1731,7 @@
  * **Min. angle:** It sets the starting angle of rotation (Valid in auto-rotation mode).
  * **Max. angle:** It sets the ending angle of rotation (Valid in auto-rotation mode).
--**Rotation angle: **The rotating angle is determined by designated address;
++**Rotation angle: **the rotating angle is determined by designated address;
  **Rotation center**: It shows the rotation center coordinates;
@@ -1745,7 +1745,7 @@
  **Enable auto-spin: **When the address is set to ON, the picture will rotate automatically.
--**Hide:** Control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.
++**Hide:** control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.
  == **Drop-down List** ==
@@ -1761,18 +1761,18 @@
  **1) Edit**
 . **Read Address:** The data from designated address will be displayed.
--1. **Same read-write address:** Configure "Write Address" as the same as "Read Address".
--1. **Write Address: **Write data to designated address. The address can be different from "Read Address".
++1. **Same read-write address:** Configure "Write Address" is the same as "Read Address".
++1. **Write Address: **Write data to designated address. The address can be different "Read Address".
  **2) Format**
--Set data format for object, it provides 16-bit unsigned decimal,16-bit BCD, 16-bit unsigned decimal, 32-bit BCD, 32-bit unsigned decimal, and 32-bit unsigned decimal.
++Set data format for object, it provides 16-bit unsigned decimal,16-bit BCD, 16-bit unsigned decimal, 32-bit BCD, 32-bit unsigned decimal and 32-bit unsigned decimal.
  **3) State count**
  It could set the total number to display in the drop-list and supports up to 128 states (1 to 128). The default value of state is corresponding to the number of states. (State 1 corresponding to value 1). You can also click "state values" to set it according to your needs.
--**State value: **User can set different values to correspond to different states, the setting window as below figure shows.
++**State value: **You can set different values to correspond to different states, the setting window as below figure shows.
  (% style="text-align:center" %)
  [[image:6.Objects_html_da9a6696f320b427.gif||class="img-thumbnail"]]
@@ -1816,28 +1816,23 @@
  **3) Read state text from address**
--1. **Text start address: **The first address of occupied multiple consecutive addresses. Address length: [Text length/2] *[state number +1].
++1. **Text start address: **the first address of occupied multiple consecutive addresses. Address length: [Text length/2] *[state number +1].
  * For example: 10 states, the address length= (10/2) *(10+1) =55. It set HDW100 as start address, so the HDW100-HDW104 stores the currently selected text content, the HDW105-HDW109 displays the text in the first state, the HDW110-HDW114 displays the second, and so on.
  (% start="2" %)
--1. **Refresh: **The drop-down list status value is updated according to the text address content. The drop-down list is not updated immediately, when the data in the text address change is completed, only the refresh is triggered, it will update.
++1. **Refresh:**The drop-down list status value is updated according to the text address content.The drop-down list is not updated immediately, when the data in the text address change is completed, only the refresh is triggered, it will update.
  == **Camera display** ==
  Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Camera__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCameradisplay]](%%)].
--(% class="box infomessage" %)
--(((
  **✎Note:**
  This function requires special HMI model, the detailed information, please contact sales.
--)))
  === **IP Camera** ===
--**(1) General**
--
  (% style="text-align:center" %)
  [[image:6.Objects_html_2bc22bd50bf65eb.gif||class="img-thumbnail"]]
@@ -2247,7 +2247,7 @@
  The camera configured via ip only supports, turn on, turn off, screenshot basic functions.
  )))
--**EZVIZ Cloud Description**
++**EZVIZ Cloud Descirption**
  (% style="text-align:center" %)
  [[image:企业微信截图_1673081149790.png]]
@@ -2353,23 +2353,23 @@
  |=(% style="width: 129px;" %)60020|(% style="width:366px" %)Unsupport this command|(% style="width:531px" %)Confirm the device whether supports this operation or not
  (% class="wikigeneratedid" %)
--**Default Configuration**： Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
++**Default Configuration**：Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
  **In the default configuration, the following are required：**
--**AppKey**： EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
--**Secret**： EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
--**Channel number**： EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
++**AppKey**：EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
++**Secret**：EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
++**Channel number**：EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
--**S/N： **EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
++**S/N：**EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
  **In the default configuration, the following are optional:**
--**IP**： EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
++**IP**：EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
--**RTSP Port**： EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
--**Verification Code**： EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
++**RTSP Port**：EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
++**Verification Code**：EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
  {{info}}
  **✎Note: **The required content in the configuration only supports remote monitoring when the camera screen can be displayed, if there is a demand for the screen side can also display the camera screen, user need to fill in the optional content in the configuration.
@@ -2377,8 +2377,6 @@
  === **USB Camera** ===
--**(1) General**
--
  (% style="text-align:center" %)
  [[image:6.Objects_html_6d926ea40f8267c.gif||class="img-thumbnail"]]
@@ -2395,7 +2395,7 @@
  |(% style="width:144px" %)1|(% style="width:700px" %)Enable the screenshot function
  |(% style="width:144px" %)2|(% style="width:700px" %)refresh camera display object
--**Camera state: **It shows the current camera states. It occupies a word address. Different value means different operations, as below table shows:
++**Camera state: **It shows the current camera states. Itoccupies a word address. Different value means different operations, as below table shows:
  (% class="table-bordered" %)
  |=**Value**|=**Operation**
@@ -2416,11 +2416,11 @@
  The current screenshots are only allowed on the SD card. When the SD card does not exist the system will cache the latest 10 screenshots.
--**Picture name: **The name of the image is controlled by the address. The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
++**Picture name: **The name of the image is controlled by the address.The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
  **4) Global screenshot**
--If this function is enabled, camera display object can perform the screenshot operation when HMI is running and save it as a . BMP image.
++If this function is enable, camera display object can perform the screenshot operation when HMI is running and save it as a .BMP image.
  If this function is disabled, camera display object only performs the screenshot operation when it is displayed on screen.
@@ -2430,30 +2430,27 @@
  **6) Use resolution size**
--Coordinate displays the object location on the screen, and size is the length and width of the object.
++Coordinate displays the object location in the screen, and size is the length and width of the object.
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
--* When HMI is displayed horizontally, the USB camera screen displays normally. If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
++* When HMI is displayed horizontally, the USB camera screen displays normally.If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
  * One HMI is only allowed to connect with one USB camera device. There is only one USB camera display part in the whole project screen, and the camera display part is not allowed to be placed on the public screen (1002: common Windows).
  * Sometimes the USB camera may lose the image because of the influence in the field, then we suggest to PI9000 HMI and the recommended USB camera model.
--* All below USB camera model have been tested by WECON to ensure compatibility.
++* All below USB camera model have been tested by WECON to ensure the compatibility.
  * Currently, only PI8000 and PI9000 series support the USB camera function. Recommended USB cameras include:
  ** REB-USB 100W07M (supports 720p)
  ** WX152HD (supports 720p)
  ** RMONCAM G200 (supports 720p)
--** ASHU S300 (640*480
--)))
++** ASHU S300 (640*480)
--*
--
  == **Camera control** ==
--This is for control camera; This object need to be used with camera display object.
++**Introduction**
++This is for control camera; this object need to be used with camera display object.
++
  **Description**
  (% style="text-align:center" %)
@@ -2463,11 +2463,11 @@
  Read a string from designated system address, and then combine the instruction to control the camera image.
--When the dynamic control command is disabled, the complete camera control command is entered in order to display the camera contents.
++When the dynamic control command is disabled, the complete camera control command be entered in order to display the camera contents.
  **2) Camera control instruction**
--This is for entering static instruction for camera so that users can operate camera when HMI running.
++This is for enter static instruction for camera, so that users can operation camera when HMI running;
  **3) Control bit**
@@ -2479,7 +2479,7 @@
  == **Flow component** ==
--The flow components are mainly used to reflect the flow state in process flow production. User could set the style of flow components according to requirements.
++The flow components are mainly used to reflect the flow state in process flow production. You could set the style of flow components according to requirements.
  **Description**
@@ -2499,9 +2499,9 @@
 . **Block width:** It sets block width of flow component.
 . **PipeFrn width: **It sets outer border width of flow component.
 . **Block length: **It sets block length of flow component.
--1. **Transparence:** It sets transparence of flow component. (from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
--1. **Ratio:** It sets the display ratio of block and background (Display density of the block in flow component).
--1. **Speed:** It sets flow speed of the block during HMI running.
++1. **Transparence:** It sets transparence of flow component.(from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
++1. **Ratio:** It sets display ratio of block and background (Display density of the block in flow component).
++1. **Speed:** It setsflow speed of the block during HMI running.
  **(3) Control**
@@ -2525,9 +2525,9 @@
  == **Printer** ==
--The printing object is primarily suitable for printing out or screenshots saving when connected to micro printer.
++The printing object is primarily suitable for print out or screenshots saving when connected to micro printer.
--Printer has two types: serial printer and USB printer. Printf (printext function) should be called when it's used to print fixed message in a script.
++Printer has two types: **serial printer and USB printer**. Printf (printext function) should be called when it's used to print fixed message in a script.
  **Printer protocol**
@@ -2547,18 +2547,18 @@
  **(1) Display settings**
 . **Direction: **Four direction choices in printing: 0, 90, 180, and 270.
--1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion to paper size.
++1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion with paper size.
  **(2) Trigger mode**
--1. **Trigger address: **When trigger address turns ON. The printer starts to respond operationally.
++1. **Trigger address: **When trigger address turns ON.Printer starts to respond operation.
 . **Printer\ Save:** It sets operation for this object, printer object could support sending printing command to printer device, and including screenshot.
  **(3) Save path**
--Valid when the save mode is selected, screenshot the content in printing object area, and save it in specified storage and folder, when trigger address turns ON.
++Valid when the save mode is selected, screenshot the content in printing object area and the save it in specified storage and folder, when trigger address turns ON.
--Folder: It's available to select an SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture the first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
++Folder: It's available to select SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
  **Related issues**
@@ -2624,10 +2624,8 @@
  English 2
  )))
--(% class="box infomessage" %)
--(((
++(% class="wikigeneratedid" %)
  ✎**Note:** For [[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--)))
  == **Time** ==
@@ -2653,14 +2653,16 @@
  == **Text** ==
--It adds text to HMI screen, and an object can be displayed in 8 languages (set in "All Languages") with a special address setting.
++It adds text to HMI screen, and a object can be displayed in 8 languages (set in "All Languages") with a special address setting.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_3cae6153cc6e4750.gif||class="img-thumbnail"]]
  **(1) Current state**
--It is used to switch the object states, but [Text] object only has one state, so this function is invalid.
++It used to switch the object states, but [Text] object only has one state, so this function is invalid.
  **(2) All language**
@@ -2679,7 +2679,7 @@
  **(5) Text color**
--It sets color of text in object.
++It sets color for text in object.
  **(6) Text background**
@@ -2687,8 +2687,10 @@
  == **Table** ==
--It is displayed in a table format on the HMI screen to meet the display needs of user.
++It is displayed in a table format in the HMI screen to meet the display needs of user.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_2aad7ef679949d71.gif||class="img-thumbnail"]]
@@ -2701,7 +2701,7 @@
 . **Border:** It sets table line color, including table line and frame line.
 . **Transparence: **It sets the transparency of the object background.
 . **Fill style: **There are two options for it, one is display background, and the other is no background.
--1. **Background:** Valid when selecting display background in "Fill style".
++1. **Background:** Valid when select display background in "Fill style".
  **(2) View**
@@ -2711,6 +2711,8 @@
  It is displayed in line format in the HMI screen to meet the display needs of user.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_795af47bf0ad8529.gif||class="img-thumbnail"]]
@@ -2728,7 +2728,7 @@
  **(3) Coordinate control**
--Dynamically set the position coordinate between two points in line. Set four addresses respectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
++Dynamically set the position coordinate between two points in line. Set four addressesrespectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
  **(4) Color control**
@@ -2740,10 +2740,12 @@
  == **Polygon** ==
--It is displayed in polygon format on the HMI screen to meet the display needs of user.
++It is displayed in polygon format in the HMI screen to meet the display needs of user.
  Right click to close polygon and then complete the creation procedure. Select the polygon, then click its point position to change its vertex coordinate after it is created.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_9f46a2daf3b48e68.gif||class="img-thumbnail"]]
@@ -2752,7 +2752,7 @@
 . **Border color: **It sets border line color.
 . **Border type:** It sets border line type.
 . **Border width: **It sets border line width.
--1. **Transparence: **It sets the transparency of the object's background.
++1. **Transparence: **It sets the transparency of the object background.
 . **Coordinate editing:** It changes coordinate for all points in this object, as below shows.
  (% style="text-align:center" %)
@@ -2776,8 +2776,10 @@
  == **Cycle/ Ellipse** ==
--It is displayed as cycle on HMI screen to meet the display needs of user.
++It is displayed as cycle in HMI screen to meet the display needs of user.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_1851aaa90af6ee72.gif||class="img-thumbnail"]]
@@ -2787,8 +2787,8 @@
 . **Frame width: **It sets border line type.
 . **Frame type: **It sets border line width
 . **Pattern: **It sets background type, there are four types.
--1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern]
--1. **Transparence:** It sets the transparency of the object's background.
++1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern]
++1. **Transparence:** It sets the transparency of the object background.
  **2) Transparence control**
@@ -2796,7 +2796,7 @@
  **3) Cycle**
--Check if it is for circle; uncheck it for ellipse.
++Check if for circle; uncheck it for ellipse.
  **4) Color control**
@@ -2822,6 +2822,7 @@
  **2) Display settings**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_4729b28f315a5a9b.gif||class="img-thumbnail"]]
@@ -2830,7 +2830,7 @@
 . **Line width: **It sets border line type.
 . **Fill style: **It sets background type, there are four types.
 . **Transparence:** It sets the transparency of the object background.
--1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern].
++1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern].
  **(3) Only show arc**
@@ -2856,6 +2856,8 @@
  The line segments are linked end-to-end to form a broken line, whose vertex coordinate can be modified by drafting, just like polygon.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_c3b0de1d4c2fe745.gif||class="img-thumbnail"]]
@@ -2878,7 +2878,7 @@
  In basic display settings, the line width can't be changed, but user can change width by address.
--Read the numerical value of address to control the width of line. Display range of numerical value:1-10.
++Read the numerical value of address to control the width of line.Display range of numerical value:1-10.
  **(4) View**
@@ -2888,6 +2888,8 @@
  The linear scale is a linear scale that draws the specified area with a bisector. The specific scale of the scale can be marked with static text.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_b604bd83c8b8b6d1.gif||class="img-thumbnail"]]
@@ -2895,12 +2895,12 @@
 . **Line color:** It sets all line in object (including main and sub scale).
 . **Display direction: **It provides four modes for display.
--1. **Main scale: **It sets the cell of the main scale.
++1. **Main scale:**It sets the cell of the main scale.
 . **Sub scale:** It sets the cell of sub scale for every main scale.
  **(2) View**
--It is for preview object.
++It is for preview object;
  == **Arc scale** ==
@@ -2934,15 +2934,15 @@
  Customized object is provided for users to design the universal interface of object freely to meet customization requirements.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_c8146ad79a9ce732.gif||class="img-thumbnail"]]
--1. **Function Address:** The numerical value in this address is used as the function code of object to handle the corresponding operation.
--1. **DLL file name: **Select needed dll file. (i.e. dll files provided by users)
--1. **Custom address:** Users can add some function address to cooperate with dll file to complete other operations.
++1. **Function Address:** the numerical value in this address is used as the function code of object to handle the corresponding operation.
++1. **DLL file name: **Select needed dll file (i.e. dll files provided by users)
++1. **Custom address:** users can add some function address to cooperate with dll file to complete other operations
--(% class="box infomessage" %)
--(((
  **✎Note:**
  This is a custom-made object that requires the cooperation of WECON software engineers.
@@ -2949,7 +2949,6 @@
  Required documents: two XXXXXX.dll files and an document.
--* One dll file is used on PC and should be put under the dll_pc folder in the software installation directory.
++* One dll file is used in PC and should be put under the dll_pc folder in the software installation directory.
  * One dll file is used in HMI and should be put under the dll_hmi folder in the software installation directory.
  * A document for illustrating the dll files.
--)))

XWiki.XWikiComments[0]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-1tuen8"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-v9dwdf"/}} this is test message

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:16:52.686

XWiki.XWikiComments[1]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-54p1l2"/}} hi

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:20:52.190

XWiki.XWikiComments[2]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-xj75f6"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-le3bx2"/}} 这个应该可以了吧

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:23:11.227

XWiki.XWikiComments[3]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-hello

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:28:36.248

XWiki.XWikiComments[4]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-撒反对

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:31:30.668

XWiki.XWikiComments[5]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-z27h71"/}} 最新的测试

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:38:03.653

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents