Skip to Content

Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41
From version 87.1
edited by Mora Zhou
on 2023/10/31 15:50
Change comment: There is no comment for this version
To version 56.1
edited by Karen
on 2023/05/25 14:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Mora
1 +XWiki.Karen
Content
... ... @@ -103,19 +103,6 @@
103 103  (% style="text-align:center" %)
104 104  [[image:位开关 6.png||class="img-thumbnail"]]
105 105  
106 -**No trigger:** No way to trigger
107 -
108 -**Trigger before pressing:** Trigger bit address is set to 1 before pressing
109 -
110 -**Trigger after pressing: **After pressing Enter, trigger bit address is set to 1 before closing the keyboard
111 -
112 -**Trigger and reset before pressing: **Trigger bit address is set to 1 and then set to 0 bedore pressing
113 -
114 -**Trigger and reset after pressing: **After pressing Enter, trigger bit address is set to 1 and then set to 0 before closing the keyboard
115 -
116 -**Trigger before pressing, reset after: **Trigger bit address is set to 1 before pressing; After pressing Enter, trigger bit address is set to 0 before closing the keyboard
117 -
118 -
119 119  **Access denied setting**
120 120  
121 121  Users can set enable password for object. There are following operating setting when user permissions are insufficient. But "Pop login screen" and "Hide object" are mutually exclusive.
... ... @@ -471,8 +471,6 @@
471 471  * **Run times: **Configuration sub-function execute times. 0 means unlimited times.
472 472  * **Break:** Stop executing sub-function when trigger address is ON.
473 473  
474 -(% class="box infomessage" %)
475 -(((
476 476  ✎**Note:**
477 477  
478 478  * Nested patterns of object cycle and sub-function cycles are as follows.
... ... @@ -482,7 +482,6 @@
482 482  ** If the object cycle ends later than the sub-function cycle, the sub-function cycle would be triggered again.
483 483  ** If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.
484 484  * For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
485 -)))
486 486  
487 487  == Slider switch ==
488 488  
... ... @@ -787,8 +787,6 @@
787 787  |(% style="width:277px" %)HDW18|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Minute
788 788  |(% style="width:277px" %)HDW19|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Second
789 789  
790 -(% class="box infomessage" %)
791 -(((
792 792  **✎Note:**
793 793  
794 794  * [Function address (20 words)] need to be HMI internal address;
... ... @@ -795,9 +795,6 @@
795 795  * When the start time and end time of the query are enabled, if the end time is smaller than the start time, the system automatically swaps the start and end times to calculate the span of the query;
796 796  * After manually setting the start time and end time of the query, you need to manually update the data (the default will be automatically updated);
797 797  
798 -
799 -)))
800 -
801 801  **Appearance**
802 802  
803 803  (% style="text-align:center" %)
... ... @@ -947,10 +947,7 @@
947 947  * ...
948 948  * 40=10 means this object display 10th page.
949 949  
950 -(% class="box infomessage" %)
951 -(((
952 952  **✎Note:** Every page contains 50 records.
953 -)))
954 954  
955 955  **Start Time**
956 956  
... ... @@ -1156,8 +1156,6 @@
1156 1156  (% style="text-align:center" %)
1157 1157  [[image:6.Objects_html_ea2cd87aaa6600cd.gif||height="413" width="567" class="img-thumbnail"]]
1158 1158  
1159 -(% class="box infomessage" %)
1160 -(((
1161 1161  (% class="wikigeneratedid" %)
1162 1162  **✎Note:**
1163 1163  
... ... @@ -1164,7 +1164,6 @@
1164 1164  * If the file type is recipe file, modify the value of the address of "Select line" to control the selected line in the display list to the corresponding line. If another file type is selected, this address can only display the selected line (read-only mode).
1165 1165  * For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. The options of them will no longer be displayed in the record.
1166 1166  * For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
1167 -)))
1168 1168  
1169 1169  == **File list** ==
1170 1170  
... ... @@ -1189,10 +1189,7 @@
1189 1189  ** ...
1190 1190  ** If 40=10, the 10th row of object is selected.
1191 1191  
1192 -(% class="box infomessage" %)
1193 -(((
1194 1194  ✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying line No.
1195 -)))
1196 1196  
1197 1197  * **Folder name address:** This is for setting recipe file name, in advance recipe mode.
1198 1198  
... ... @@ -1239,10 +1239,8 @@
1239 1239  (% style="text-align:center" %)
1240 1240  [[image:6.Objects_html_a68643b928e3930.gif||class="img-thumbnail"]]
1241 1241  
1242 -(% class="box infomessage" %)
1243 -(((
1212 +(% class="wikigeneratedid" %)
1244 1244  ✎**Note: **For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
1245 -)))
1246 1246  
1247 1247  == **XY plot** ==
1248 1248  
... ... @@ -1353,10 +1353,7 @@
1353 1353  
1354 1354  The Disc Record displays the data from data source in the form of a disc curve.
1355 1355  
1356 -(% class="box infomessage" %)
1357 -(((
1358 1358  **✎Note: **This function are only supported by HMI+, i series, ie series and ig series.
1359 -)))
1360 1360  
1361 1361  **Source**
1362 1362  
... ... @@ -1370,10 +1370,7 @@
1370 1370  ** **History**: It is in data record area configured by data record. Multiple record groups could be configured, and each record group has multiple channels.
1371 1371  ** **Real Time**: It is in Real-time trend chart configured by data record. Multiple record groups could be configured, and each record group has multiple curve numbers.
1372 1372  
1373 -(% class="box infomessage" %)
1374 -(((
1375 1375  **✎Note: **There must be one of settings (Data record and real-time trend chart) in configurations, otherwise there will be no data in curve buffer.
1376 -)))
1377 1377  
1378 1378  * **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed. After selecting the curve to be displayed, it can set the scale range and scale color of each curve.
1379 1379  * **Enable**: After selecting the corresponding curve number in the status bar and enabling the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
... ... @@ -1407,10 +1407,7 @@
1407 1407  **Function start Address**: Open the sub-screen of the data record query, and the system can automatically allocate the object address of the query screen according to the configured address. When using this component, it will automatically generate buttons for four direction, you can use these four control keys to view the data record display, and automatically create a new sub-screen based on the function start address, the content of the sub-screen is the query setting for span and start time.
1408 1408  When two objects use one function screen at the same time, if the function addresses of the two object are the same, changing the built-in screen will affect the operation of the two display object at the same time. If the function addresses of the two objects are different, the second object with the built-in screen can be displayed normally, and the first object will be displayed abnormally.
1409 1409  
1410 -(% class="box infomessage" %)
1411 -(((
1412 1412  **✎Note: ** When copying Data record display, it is recommended to create a new "function screen" to avoid repeated calls that may cause abnormal functions.
1413 -)))
1414 1414  
1415 1415  **Start time**: Set the start time and conditions for data viewing.
1416 1416  
... ... @@ -1595,10 +1595,7 @@
1595 1595  (% style="text-align:center" %)
1596 1596  [[image:6.Objects_html_9612d7685f349400.gif||class="img-thumbnail"]]
1597 1597  
1598 -(% class="box infomessage" %)
1599 -(((
1600 1600  ✎**Note:** For the "Text" setting, please refer to "[[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]" in "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
1601 -)))
1602 1602  
1603 1603  = **Display** =
1604 1604  
... ... @@ -1661,14 +1661,11 @@
1661 1661  1. **Variable QR:** It is for setting read address, the content of QR code is from this setting address.
1662 1662  1. **QR String: **It is for set static content for QR code.
1663 1663  
1664 -(% class="box infomessage" %)
1665 -(((
1666 1666  **✎Note:**
1667 1667  
1668 1668  * HMI machine ID address: HSW10494 ~~ HSW10558.
1669 1669  * So if user want to use QR code to display machine ID on project screen, please check "Variable QR", and set address is HSW10494.
1670 1670  * When scanning the QR code by APP to monitor HMI, the default access password is 888888.
1671 -)))
1672 1672  
1673 1673  == **Picture** ==
1674 1674  
... ... @@ -1697,13 +1697,10 @@
1697 1697  1. **Folder: **Set the name of the folder where the picture is located.The folder name can be up to 31 characters. （Note：The picture must be stored in the U disk folder and cannot be stored in the root directory of the U disk.）
1698 1698  1. **File address: **16 consecutive addresses enter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.
1699 1699  
1700 -(% class="box infomessage" %)
1701 -(((
1702 1702  ✎**Note:** 
1703 1703  
1704 1704  1. The image could be displayed in BMP, JPG, PNG, and JPEG formats. Images with a resolution of 1920 x 1080 or higher are not supported.
1705 1705  1. For the setting of [[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
1706 -)))
1707 1707  
1708 1708  == **Rotation picture** ==
1709 1709  
... ... @@ -1827,12 +1827,9 @@
1827 1827  
1828 1828  Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Camera__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCameradisplay]](%%)].
1829 1829  
1830 -(% class="box infomessage" %)
1831 -(((
1832 1832  **✎Note:**
1833 1833  
1834 1834  This function requires special HMI model, the detailed information, please contact sales.
1835 -)))
1836 1836  
1837 1837  === **IP Camera** ===
1838 1838  
... ... @@ -2432,8 +2432,6 @@
2432 2432  
2433 2433  Coordinate displays the object location on the screen, and size is the length and width of the object.
2434 2434  
2435 -(% class="box infomessage" %)
2436 -(((
2437 2437  **✎Note:**
2438 2438  
2439 2439  * When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
... ... @@ -2445,11 +2445,8 @@
2445 2445  ** REB-USB 100W07M (supports 720p)
2446 2446  ** WX152HD (supports 720p)
2447 2447  ** RMONCAM G200 (supports 720p)
2448 -** ASHU S300 (640*480
2449 -)))
2393 +** ASHU S300 (640*480)
2450 2450  
2451 -*
2452 -
2453 2453  == **Camera control** ==
2454 2454  
2455 2455  This is for control camera; This object need to be used with camera display object.
... ... @@ -2624,10 +2624,8 @@
2624 2624  English 2
2625 2625  )))
2626 2626  
2627 -(% class="box infomessage" %)
2628 -(((
2569 +(% class="wikigeneratedid" %)
2629 2629  ✎**Note:** For [[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
2630 -)))
2631 2631  
2632 2632  == **Time** ==
2633 2633  
... ... @@ -2653,14 +2653,16 @@
2653 2653  
2654 2654  == **Text** ==
2655 2655  
2656 -It adds text to HMI screen, and an object can be displayed in 8 languages (set in "All Languages") with a special address setting.
2596 +It adds text to HMI screen, and a object can be displayed in 8 languages (set in "All Languages") with a special address setting.
2657 2657  
2598 +**Description**
2599 +
2658 2658  (% style="text-align:center" %)
2659 2659  [[image:6.Objects_html_3cae6153cc6e4750.gif||class="img-thumbnail"]]
2660 2660  
2661 2661  **(1) Current state**
2662 2662  
2663 -It is used to switch the object states, but [Text] object only has one state, so this function is invalid.
2605 +It used to switch the object states, but [Text] object only has one state, so this function is invalid.
2664 2664  
2665 2665  **(2) All language**
2666 2666  
... ... @@ -2679,7 +2679,7 @@
2679 2679  
2680 2680  **(5) Text color**
2681 2681  
2682 -It sets color of text in object.
2624 +It sets color for text in object.
2683 2683  
2684 2684  **(6) Text background**
2685 2685  
... ... @@ -2687,8 +2687,10 @@
2687 2687  
2688 2688  == **Table** ==
2689 2689  
2690 -It is displayed in a table format on the HMI screen to meet the display needs of user.
2632 +It is displayed in a table format in the HMI screen to meet the display needs of user.
2691 2691  
2634 +**Description**
2635 +
2692 2692  (% style="text-align:center" %)
2693 2693  [[image:6.Objects_html_2aad7ef679949d71.gif||class="img-thumbnail"]]
2694 2694  
... ... @@ -2701,7 +2701,7 @@
2701 2701  1. **Border:** It sets table line color, including table line and frame line.
2702 2702  1. **Transparence: **It sets the transparency of the object background.
2703 2703  1. **Fill style: **There are two options for it, one is display background, and the other is no background.
2704 -1. **Background:** Valid when selecting display background in "Fill style".
2648 +1. **Background:** Valid when select display background in "Fill style".
2705 2705  
2706 2706  **(2) View**
2707 2707  
... ... @@ -2711,6 +2711,8 @@
2711 2711  
2712 2712  It is displayed in line format in the HMI screen to meet the display needs of user.
2713 2713  
2658 +**Description**
2659 +
2714 2714  (% style="text-align:center" %)
2715 2715  [[image:6.Objects_html_795af47bf0ad8529.gif||class="img-thumbnail"]]
2716 2716  
... ... @@ -2728,7 +2728,7 @@
2728 2728  
2729 2729  **(3) Coordinate control**
2730 2730  
2731 -Dynamically set the position coordinate between two points in line. Set four addresses respectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
2677 +Dynamically set the position coordinate between two points in line. Set four addressesrespectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
2732 2732  
2733 2733  **(4) Color control**
2734 2734  
... ... @@ -2740,10 +2740,12 @@
2740 2740  
2741 2741  == **Polygon** ==
2742 2742  
2743 -It is displayed in polygon format on the HMI screen to meet the display needs of user.
2689 +It is displayed in polygon format in the HMI screen to meet the display needs of user.
2744 2744  
2745 2745  Right click to close polygon and then complete the creation procedure. Select the polygon, then click its point position to change its vertex coordinate after it is created.
2746 2746  
2693 +**Description**
2694 +
2747 2747  (% style="text-align:center" %)
2748 2748  [[image:6.Objects_html_9f46a2daf3b48e68.gif||class="img-thumbnail"]]
2749 2749  
... ... @@ -2752,7 +2752,7 @@
2752 2752  1. **Border color: **It sets border line color.
2753 2753  1. **Border type:** It sets border line type.
2754 2754  1. **Border width: **It sets border line width.
2755 -1. **Transparence: **It sets the transparency of the object's background.
2703 +1. **Transparence: **It sets the transparency of the object background.
2756 2756  1. **Coordinate editing:** It changes coordinate for all points in this object, as below shows.
2757 2757  
2758 2758  (% style="text-align:center" %)
... ... @@ -2776,8 +2776,10 @@
2776 2776  
2777 2777  == **Cycle/ Ellipse** ==
2778 2778  
2779 -It is displayed as cycle on HMI screen to meet the display needs of user.
2727 +It is displayed as cycle in HMI screen to meet the display needs of user.
2780 2780  
2729 +**Description**
2730 +
2781 2781  (% style="text-align:center" %)
2782 2782  [[image:6.Objects_html_1851aaa90af6ee72.gif||class="img-thumbnail"]]
2783 2783  
... ... @@ -2787,8 +2787,8 @@
2787 2787  1. **Frame width: **It sets border line type.
2788 2788  1. **Frame type: **It sets border line width
2789 2789  1. **Pattern: **It sets background type, there are four types.
2790 -1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern]
2791 -1. **Transparence:** It sets the transparency of the object's background.
2740 +1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern]
2741 +1. **Transparence:** It sets the transparency of the object background.
2792 2792  
2793 2793  **2) Transparence control**
2794 2794  
... ... @@ -2796,7 +2796,7 @@
2796 2796  
2797 2797  **3) Cycle**
2798 2798  
2799 -Check if it is for circle; uncheck it for ellipse.
2749 +Check if for circle; uncheck it for ellipse.
2800 2800  
2801 2801  **4) Color control**
2802 2802  
... ... @@ -2822,6 +2822,7 @@
2822 2822  
2823 2823  **2) Display settings**
2824 2824  
2775 +
2825 2825  (% style="text-align:center" %)
2826 2826  [[image:6.Objects_html_4729b28f315a5a9b.gif||class="img-thumbnail"]]
2827 2827  
... ... @@ -2830,7 +2830,7 @@
2830 2830  1. **Line width: **It sets border line type.
2831 2831  1. **Fill style: **It sets background type, there are four types.
2832 2832  1. **Transparence:** It sets the transparency of the object background.
2833 -1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern].
2784 +1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern].
2834 2834  
2835 2835  **(3) Only show arc**
2836 2836  
... ... @@ -2856,6 +2856,8 @@
2856 2856  
2857 2857  The line segments are linked end-to-end to form a broken line, whose vertex coordinate can be modified by drafting, just like polygon.
2858 2858  
2810 +**Description**
2811 +
2859 2859  (% style="text-align:center" %)
2860 2860  [[image:6.Objects_html_c3b0de1d4c2fe745.gif||class="img-thumbnail"]]
2861 2861  
... ... @@ -2878,7 +2878,7 @@
2878 2878  
2879 2879  In basic display settings, the line width can't be changed, but user can change width by address.
2880 2880  
2881 -Read the numerical value of address to control the width of line. Display range of numerical value:1-10.
2834 +Read the numerical value of address to control the width of line.Display range of numerical value:1-10.
2882 2882  
2883 2883  **(4) View**
2884 2884  
... ... @@ -2888,6 +2888,8 @@
2888 2888  
2889 2889  The linear scale is a linear scale that draws the specified area with a bisector. The specific scale of the scale can be marked with static text.
2890 2890  
2844 +**Description**
2845 +
2891 2891  (% style="text-align:center" %)
2892 2892  [[image:6.Objects_html_b604bd83c8b8b6d1.gif||class="img-thumbnail"]]
2893 2893  
... ... @@ -2895,12 +2895,12 @@
2895 2895  
2896 2896  1. **Line color:** It sets all line in object (including main and sub scale).
2897 2897  1. **Display direction: **It provides four modes for display.
2898 -1. **Main scale: **It sets the cell of the main scale.
2853 +1. **Main scale:**It sets the cell of the main scale.
2899 2899  1. **Sub scale:** It sets the cell of sub scale for every main scale.
2900 2900  
2901 2901  **(2) View**
2902 2902  
2903 -It is for preview object.
2858 +It is for preview object;
2904 2904  
2905 2905  == **Arc scale** ==
2906 2906  
... ... @@ -2934,15 +2934,15 @@
2934 2934  
2935 2935  Customized object is provided for users to design the universal interface of object freely to meet customization requirements.
2936 2936  
2892 +**Description**
2893 +
2937 2937  (% style="text-align:center" %)
2938 2938  [[image:6.Objects_html_c8146ad79a9ce732.gif||class="img-thumbnail"]]
2939 2939  
2940 -1. **Function Address:** The numerical value in this address is used as the function code of object to handle the corresponding operation.
2941 -1. **DLL file name: **Select needed dll file. (i.e. dll files provided by users)
2942 -1. **Custom address:** Users can add some function address to cooperate with dll file to complete other operations.
2897 +1. **Function Address:** the numerical value in this address is used as the function code of object to handle the corresponding operation.
2898 +1. **DLL file name: **Select needed dll file (i.e. dll files provided by users)
2899 +1. **Custom address:** users can add some function address to cooperate with dll file to complete other operations
2943 2943  
2944 -(% class="box infomessage" %)
2945 -(((
2946 2946  **✎Note:**
2947 2947  
2948 2948  This is a custom-made object that requires the cooperation of WECON software engineers.
... ... @@ -2949,7 +2949,6 @@
2949 2949  
2950 2950  Required documents: two XXXXXX.dll files and an document.
2951 2951  
2952 -* One dll file is used on PC and should be put under the dll_pc folder in the software installation directory.
2907 +* One dll file is used in PC and should be put under the dll_pc folder in the software installation directory.
2953 2953  * One dll file is used in HMI and should be put under the dll_hmi folder in the software installation directory.
2954 2954  * A document for illustrating the dll files.
2955 -)))
XWiki.XWikiComments[0]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-1tuen8"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-v9dwdf"/}} this is test message
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:16:52.686
XWiki.XWikiComments[1]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-54p1l2"/}} hi
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:20:52.190
XWiki.XWikiComments[2]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-xj75f6"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-le3bx2"/}} 这个应该可以了吧
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:23:11.227
XWiki.XWikiComments[3]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -hello
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:28:36.248
XWiki.XWikiComments[4]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -撒反对
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:31:30.668
XWiki.XWikiComments[5]
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.test
Comment
... ... @@ -1,1 +1,0 @@
1 -{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-z27h71"/}} 最新的测试
Date
... ... @@ -1,1 +1,0 @@
1 -2023-07-27 17:38:03.653