Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41

From 71.11 to 71.10 From 87.2 to 87.1

From version 87.1

edited by Mora Zhou
on 2023/10/31 15:50

Change comment: There is no comment for this version

To version 71.11

edited by test
on 2023/07/27 17:31

Change comment: Added comment

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Objects (0 modified, 0 added, 1 removed)
- XWiki.XWikiComments[5]

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Mora
++XWiki.test

Content

@@ -103,19 +103,6 @@
  (% style="text-align:center" %)
  [[image:位开关 6.png||class="img-thumbnail"]]
--**No trigger:** No way to trigger
--
--**Trigger before pressing:** Trigger bit address is set to 1 before pressing
--
--**Trigger after pressing: **After pressing Enter, trigger bit address is set to 1 before closing the keyboard
--
--**Trigger and reset before pressing: **Trigger bit address is set to 1 and then set to 0 bedore pressing
--
--**Trigger and reset after pressing: **After pressing Enter, trigger bit address is set to 1 and then set to 0 before closing the keyboard
--
--**Trigger before pressing, reset after: **Trigger bit address is set to 1 before pressing; After pressing Enter, trigger bit address is set to 0 before closing the keyboard
--
--
  **Access denied setting**
  Users can set enable password for object. There are following operating setting when user permissions are insufficient. But "Pop login screen" and "Hide object" are mutually exclusive.
@@ -471,8 +471,6 @@
  * **Run times: **Configuration sub-function execute times. 0 means unlimited times.
  * **Break:** Stop executing sub-function when trigger address is ON.
--(% class="box infomessage" %)
--(((
  ✎**Note:**
  * Nested patterns of object cycle and sub-function cycles are as follows.
@@ -482,7 +482,6 @@
  ** If the object cycle ends later than the sub-function cycle, the sub-function cycle would be triggered again.
  ** If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.
  * For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
  == Slider switch ==
@@ -787,8 +787,6 @@
  |(% style="width:277px" %)HDW18|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Minute
  |(% style="width:277px" %)HDW19|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Second
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * [Function address (20 words)] need to be HMI internal address;
@@ -795,9 +795,6 @@
  * When the start time and end time of the query are enabled, if the end time is smaller than the start time, the system automatically swaps the start and end times to calculate the span of the query;
  * After manually setting the start time and end time of the query, you need to manually update the data (the default will be automatically updated);
--
--)))
--
  **Appearance**
  (% style="text-align:center" %)
@@ -947,10 +947,7 @@
  * ...
  * 40=10 means this object display 10th page.
--(% class="box infomessage" %)
--(((
  **✎Note:** Every page contains 50 records.
--)))
  **Start Time**
@@ -1156,8 +1156,6 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_ea2cd87aaa6600cd.gif||height="413" width="567" class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
  (% class="wikigeneratedid" %)
  **✎Note:**
@@ -1164,7 +1164,6 @@
  * If the file type is recipe file, modify the value of the address of "Select line" to control the selected line in the display list to the corresponding line. If another file type is selected, this address can only display the selected line (read-only mode).
  * For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. The options of them will no longer be displayed in the record.
  * For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
--)))
  == **File list** ==
@@ -1189,10 +1189,7 @@
  ** ...
  ** If 40=10, the 10th row of object is selected.
--(% class="box infomessage" %)
--(((
  ✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying line No.
--)))
  * **Folder name address:** This is for setting recipe file name, in advance recipe mode.
@@ -1239,10 +1239,8 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_a68643b928e3930.gif||class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
++(% class="wikigeneratedid" %)
  ✎**Note: **For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
--)))
  == **XY plot** ==
@@ -1353,10 +1353,7 @@
  The Disc Record displays the data from data source in the form of a disc curve.
--(% class="box infomessage" %)
--(((
  **✎Note: **This function are only supported by HMI+, i series, ie series and ig series.
--)))
  **Source**
@@ -1370,10 +1370,7 @@
  ** **History**: It is in data record area configured by data record. Multiple record groups could be configured, and each record group has multiple channels.
  ** **Real Time**: It is in Real-time trend chart configured by data record. Multiple record groups could be configured, and each record group has multiple curve numbers.
--(% class="box infomessage" %)
--(((
  **✎Note: **There must be one of settings (Data record and real-time trend chart) in configurations, otherwise there will be no data in curve buffer.
--)))
  * **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed. After selecting the curve to be displayed, it can set the scale range and scale color of each curve.
  * **Enable**: After selecting the corresponding curve number in the status bar and enabling the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
@@ -1407,10 +1407,7 @@
  **Function start Address**: Open the sub-screen of the data record query, and the system can automatically allocate the object address of the query screen according to the configured address. When using this component, it will automatically generate buttons for four direction, you can use these four control keys to view the data record display, and automatically create a new sub-screen based on the function start address, the content of the sub-screen is the query setting for span and start time.
  When two objects use one function screen at the same time, if the function addresses of the two object are the same, changing the built-in screen will affect the operation of the two display object at the same time. If the function addresses of the two objects are different, the second object with the built-in screen can be displayed normally, and the first object will be displayed abnormally.
--(% class="box infomessage" %)
--(((
  **✎Note: ** When copying Data record display, it is recommended to create a new "function screen" to avoid repeated calls that may cause abnormal functions.
--)))
  **Start time**: Set the start time and conditions for data viewing.
@@ -1595,10 +1595,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_9612d7685f349400.gif||class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
  ✎**Note:** For the "Text" setting, please refer to "[[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]" in "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--)))
  = **Display** =
@@ -1661,14 +1661,11 @@
 . **Variable QR:** It is for setting read address, the content of QR code is from this setting address.
 . **QR String: **It is for set static content for QR code.
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * HMI machine ID address: HSW10494 ~~ HSW10558.
  * So if user want to use QR code to display machine ID on project screen, please check "Variable QR", and set address is HSW10494.
  * When scanning the QR code by APP to monitor HMI, the default access password is 888888.
--)))
  == **Picture** ==
@@ -1697,13 +1697,10 @@
 . **Folder: **Set the name of the folder where the picture is located.The folder name can be up to 31 characters. （Note：The picture must be stored in the U disk folder and cannot be stored in the root directory of the U disk.）
 . **File address: **16 consecutive addresses enter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.
--(% class="box infomessage" %)
--(((
  ✎**Note:**
 . The image could be displayed in BMP, JPG, PNG, and JPEG formats. Images with a resolution of 1920 x 1080 or higher are not supported.
 . For the setting of [[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
  == **Rotation picture** ==
@@ -1827,12 +1827,9 @@
  Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Camera__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCameradisplay]](%%)].
--(% class="box infomessage" %)
--(((
  **✎Note:**
  This function requires special HMI model, the detailed information, please contact sales.
--)))
  === **IP Camera** ===
@@ -2432,8 +2432,6 @@
  Coordinate displays the object location on the screen, and size is the length and width of the object.
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
@@ -2445,11 +2445,8 @@
  ** REB-USB 100W07M (supports 720p)
  ** WX152HD (supports 720p)
  ** RMONCAM G200 (supports 720p)
--** ASHU S300 (640*480
--)))
++** ASHU S300 (640*480)
--*
--
  == **Camera control** ==
  This is for control camera; This object need to be used with camera display object.
@@ -2624,10 +2624,8 @@
  English 2
  )))
--(% class="box infomessage" %)
--(((
++(% class="wikigeneratedid" %)
  ✎**Note:** For [[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--)))
  == **Time** ==
@@ -2941,8 +2941,6 @@
 . **DLL file name: **Select needed dll file. (i.e. dll files provided by users)
 . **Custom address:** Users can add some function address to cooperate with dll file to complete other operations.
--(% class="box infomessage" %)
--(((
  **✎Note:**
  This is a custom-made object that requires the cooperation of WECON software engineers.
@@ -2952,4 +2952,3 @@
  * One dll file is used on PC and should be put under the dll_pc folder in the software installation directory.
  * One dll file is used in HMI and should be put under the dll_hmi folder in the software installation directory.
  * A document for illustrating the dll files.
--)))

XWiki.XWikiComments[5]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-z27h71"/}} 最新的测试

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:38:03.653

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents