Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41

From 87.6 to 87.5 From 88.1 to 87.11

From version 87.11

edited by Hunter
on 2024/02/19 15:45

Change comment: There is no comment for this version

To version 87.6

edited by Hunter
on 2024/02/19 12:42

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -268,7 +268,7 @@
  * **States count: **Total status number for current word address, which could change the state value according to different status in button [State values], range: 1-256.
  * **State with value out of range**: When the value of the read address is not on the range of states' value, it will cause no corresponding status number is displayed. There are two modes for process when the value is out of range.
  * **Hide**: Hide the object when the value is out of range;
--* **Show state**: Specify a status when the value is out of range, for example the total states is 6(range from state No.0~~No.5), but the read value is 6, at this moment the object will show the state No.0 if selected item of show state is No.0;
++* **Show state**: Specify a status when the value is out of range, for example the ;
  **For example**
@@ -283,26 +283,27 @@
  **Transform state**
--* **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
++* **Quick Read: **Directly read the value of the connected device without going through the HMI cache
  * **Auto transforms:** Object switch states automatically
  (% style="text-align:center" %)
  [[image:6.Objects_html_b643c9a6a4bd6919.gif||class="img-thumbnail"]]
--* **Trigger to transform: **Trigger condition of auto transform
--* **Auto return:** Return to the initial state after reaching the final state;
--* **Time of transform:** Set the interval of transform between two states;
--* **Dynamic interval: **Set the dynamic interval of transform between two states. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
++**Trigger:**Control bit to enable switch automatically
++* **Auto return:** return to the initial state after reaching the final state;
++* **Time of transform:** it is used for setting the frequency in automatic switching state. Unit: 100ms.
++* **Dynamic interval: **set the frequency of automatic switching state and read it from the address. Unit: 100ms. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
++
  **Manual**
  (% style="text-align:center" %)
  [[image:6.Objects_html_a8b6636bd862369c.gif||class="img-thumbnail"]]
--* **Set state: **Set a constant value to address(according to the operate state selection) when click the object.
--* **State increase: **Increase the address value by one step when click the object, the upper limit is depends on the Last state selection.
--* **State decrease:** Decrease the address value by one step when click the object, the lower limit is depends on the Last state selection..
--* **Last state: **The upper limit or lower limit(Final state) of state increase/decrease;
++* **Set state: **Set a constant value for the word address.
++* **State increase: **Increase state for each time the switch is triggered.
++* **State decrease:** Decrease state for each time the switch is triggered.
++* **Last state:** The state will not increase/decrease when reaches limits.
  (% class="box infomessage" %)
  (((
@@ -309,9 +309,9 @@
  ✎**Note:** For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
  )))
--== Button ==
++== Keypad switch ==
--Button is designed to input data into the corresponding inputbox, this object need to work with the numeric input and character input.
++Keypad switch is designed to input data manually; this object need to work with the Keypad.User could assign letters or numbers for each switch, when the switch is triggered the data will input to the textbox.
  **Description**
@@ -329,7 +329,7 @@
  == Function switch ==
--Function switch is designed to switch screens, and call and close sub screen, and transfer record files.
++Function switch is designed to switch screens, and call and close sub screen, and transfer data record files.
  **Description**
@@ -336,6 +336,8 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_31c4ad387507a16d.gif||class="img-thumbnail"]]
++**Operation**
++
  * **Screen No: **Switch to the selected screen, it could not be subscreen;
  * **Open sub screen: **Pop-up selected sub screen, and set sub screen position, default position is (0, 0), this is the coordinates of the top left corner of the screen;
@@ -364,7 +364,7 @@
  **Using trigger address**. As the figure above, when 00 is ON, then selected operation of the function switch will be executed.
--**All terminals effect**: When this function is enabled, all terminals (screens, mobile phones, ipads, computers, etc.) will execute the function Switch Function simultaneously. For example, the screens of each terminal are different. When the screen is clicked to jump to the "Home" screen, all terminals will jump to the home screen.
++**All terminals effect**. When this function is enabled, all terminals (screens, mobile phones, ipads, computers, etc.) will execute the function Switch Function simultaneously. For example, the screens of each terminal are different. When the screen is clicked to jump to the "Home" screen, all terminals will jump to the home screen.
  (% class="box infomessage" %)
  (((
@@ -384,11 +384,13 @@
  == Combination switch ==
--The combination switch supports combine multiple functions onto one button. When the object is pressed, multiple functions are executed in sequence one by one to meet the requirements of the user.
++The combination switch supports the collection of multiple functions onto one object. When the object is pressed, multiple functions are arranged in sequence to meet the special requirements of the user.
++The combination switch contains sub-functions such as bit operation, word operation, arithmetic and screen change. Click the corresponding button on the "General" of the object to add sub-functions to the list, and up to 100 sub-functions can be added.
++
  (% class="box infomessage" %)
  (((
--✎**Note:** There can only be one screen change function in the added sub-functions, and it is at the end of the list).
++✎**Note:** there can only be one screen change function in the added sub-functions, and it is at the end of the list).
  )))
  **Description**
@@ -473,9 +473,9 @@
  * For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
  )))
--== Slide switch ==
++== Slider switch ==
--By changing the position of the slider, the corresponding address value would be changed. At the same time, the slider position will change according to the address value.
++Slide switch is a special switch object. By changing the position of the slider, the corresponding address value would be changed. At the same time, the slider position will change according to the address value.
  (% style="text-align:center" %)
  [[image:6.Objects_html_cc27b49cc3421a77.gif||class="img-thumbnail"]]

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents