Skip to Content

Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41
From version 87.3
edited by Hunter
on 2024/02/19 10:56
Change comment: There is no comment for this version
To version 87.1
edited by Mora Zhou
on 2023/10/31 15:50
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Hunter
1 +XWiki.Mora
Content
... ... @@ -17,29 +17,29 @@
17 17  
18 18  **Read-write**
19 19  
20 -* **Write Address: **Bit address operation control for HMI or PLC.
21 -* **Read**: Enable the monitoring the read address or not.
22 -* **Same read-write address**: Enable it if want to the read address and write address is exactly same.
23 -* **Read Address: **Monitoring address.
20 +* **Write Address: **Bit switch controls PLC or HMI address.
21 +* **Read Address: **Read and display PLC or HMI bit address state.
24 24  
25 25  **Mode**
26 26  
27 -* **Set OFF:** Set off the write address.
28 -* **Set ON:** Set on the write address.
29 -* **Momentary:** Set on the write address when switch is pressed, and reset the address when switch is released.
30 -* **Delay: **Interval for keep on the write address. For example: Assign the delay time as 500, write address will be reset after release button in 0.5 second.
31 -* **Switch:** Switch between True(1) and False(0) when switch is triggered.
25 +* **Set OFF:** set off the write address.
26 +* **Set ON:** set on the write address.
27 +* **Momentary:** set on the write address when switch is pressed, and set off when switch is released.
28 +* **Delay:** set off the write address after a delay. (for example: assign the delay time as 5, write address will be set off after releasing 5 ms.)
29 +* **Switch:** switch between 0 and 1 each time the switch is triggered.
32 32  
33 33  **Display**
34 34  
35 35  * **Inverted Display: **Display the state picture and text of the object reversely.
36 -* **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
37 -* **Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;
38 -** **Blink when ON: **blink when control bit is ON.
39 -** **Blink when OFF: **blink when control bit is OFF.
34 +* **Quick Read: **The speed of configuring the object is priority to other objects.
40 40  
41 -**Minimum hold time: **Only when the time of press and hold the object is greater than the set value, the object function will be executed.
36 +**Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;
42 42  
38 +* **Blink when ON: **blink when control bit is ON.
39 +* **Blink when OFF: **blink when control bit is OFF.
40 +
41 +**Minimum hold time: **Only when the time of pressing the object is greater than or equal to the set minimum hold time will the function of the object be performed.
42 +
43 43  **Indirect addressing:**
44 44  
45 45  * **Read address**: Use the value of the read address to determine the address A after deviation, and use the address A as the read address of the object.