Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41

From 18.4 to 18.3 From 87.5 to 87.4

From version 87.4

edited by Hunter
on 2024/02/19 11:18

Change comment: There is no comment for this version

To version 18.4

edited by Stone Wu
on 2022/08/05 16:26

Change comment: (Autosaved)

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 19 removed)
Objects (0 modified, 0 added, 6 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Hunter
++XWiki.Stone

Content

@@ -17,38 +17,38 @@
  **Read-write**
--* **Write Address: **Bit address operation control for HMI or PLC.
--* **Read**: Enable the monitoring the read address or not.
--* **Same read-write address**: Enable it if want to the read address and write address is exactly same.
--* **Read Address: **Monitoring address.
++* **Write Address: **Bit switch controls PLC or HMI address.
++* **Read Address: **Read and display PLC or HMI bit address state.
  **Mode**
--* **Set OFF:** Set off the write address.
--* **Set ON:** Set on the write address.
--* **Momentary:** Set on the write address when switch is pressed, and reset the address when switch is released.
--* **Delay: **Interval for keep on the write address. For example: Assign the delay time as 500, write address will be reset after release button in 0.5 second.
--* **Switch:** Switch between True(1) and False(0) when switch is triggered.
++* **Set OFF:** set off the write address.
++* **Set ON:** set on the write address.
++* **Momentary:** set on the write address when switch is pressed, and set off when switch is released.
++* **Delay:** set off the write address after a delay. (for example: assign the delay time as 5, write address will be set off after released 5 ms.)
++* **Switch:** switch between 0 and 1 each time the switch is triggered.
  **Display**
  * **Inverted Display: **Display the state picture and text of the object reversely.
--* **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
--* **Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;
--** **Blink when ON: **blink when control bit is ON.
--** **Blink when OFF: **blink when control bit is OFF.
++* **Quick Read: **The speed of configuring the object is prority to other objects.
--**Minimum hold time: **Only when the time of press and hold the object is greater than the set value, the object function will be executed.
++**Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;
++* **Blink when ON: **blink when control bit is ON.
++* **Blink when OFF: **blink when control bit is OFF.
++
++**Minimum hold time: **Only when the time of pressing the object is greater than or equal to the set minimum hold time will the function of the object be performed.
++
  **Indirect addressing:**
  * **Read address**: Use the value of the read address to determine the address A after deviation, and use the address A as the read address of the object.
--**For example:**: HDX11.0 is the read address of the object. The three indirect read address is D0, E1, and HDW2. The system would read the value of address HDW2.
++**For example:**: HDX11.0 is the read address of the object. The three indirect read address is D0, E1 and HDW2. The system would read the value of address HDW2.
--If its value is 22, and the second indirect read address E1 would update to E23, then the system would read the value of E23.
++If its value is 22, and the second indrect read address E1 would update to E23, then the system would read the value of E23.
--If its value is 33, then the first indirect read address D0 would update to D33, then the value of D33 is 44, that is, the bit of deviation is 44 bits.
++If its value is 33, then the fisrt indrect read address D0 would update to D33, then the value of D33 is 44, that is, the bit of deviation is 44 bits.
  A word has 16 bits, divide 16 into 44, and the answer is 2, remainder 12. Therefore, the read address of object is update from HDX11.0 to HDX13.12, and the final read address is HDX13.12.
@@ -59,7 +59,7 @@
  (% style="text-align:center" %)
  [[image:位开关 2.png||class="img-thumbnail"]]
--**All languages: **Edit the texts of all the languages of the object in a time. A maximum of 8 languages are supported.
++**All languages: **Edit the texts of all the languages of the object in a time. A maximum of 8 languages supported.
  (% style="text-align:center" %)
  [[image:6.Objects_html_fd7dea026037c591.gif||class="img-thumbnail"]]
@@ -90,32 +90,19 @@
  **Object lock**
--* **Lock address: **Using interlock address, address 0 means that the object would be locked and display a lock icon. Only when the interlock-bit address points to 1 will the bit switch be operated.
++* **Lock address: **Using interlock address, address 0 means that the object would be locked and display a lock icon. Only when the interlock - bit address points to 1 will the bit switch be operated.
  * **Hide "lock" icon: **If don't want to display the icon, you may check it. will be "no show" lock "icon" tick.
  * **Lock when "ON":** check it and the bit address will be locked when the interlock address is set to 1.
--**Touch available: **If you check it, you could operate the object when you touch it.
++**Touch available: **If you check it, you could oeprate the object when you touch it.
  **Enable beep: **If you check it, the object will beep when you touch it.
--**Extended trigger functions. **It is only valid for PLC address.
++**Extended trigger funtions. **It is only valid for PLC address.
  (% style="text-align:center" %)
  [[image:位开关 6.png||class="img-thumbnail"]]
--**No trigger:** No way to trigger
--
--**Trigger before pressing:** Trigger bit address is set to 1 before pressing
--
--**Trigger after pressing: **After pressing Enter, trigger bit address is set to 1 before closing the keyboard
--
--**Trigger and reset before pressing: **Trigger bit address is set to 1 and then set to 0 bedore pressing
--
--**Trigger and reset after pressing: **After pressing Enter, trigger bit address is set to 1 and then set to 0 before closing the keyboard
--
--**Trigger before pressing, reset after: **Trigger bit address is set to 1 before pressing; After pressing Enter, trigger bit address is set to 0 before closing the keyboard
--
--
  **Access denied setting**
  Users can set enable password for object. There are following operating setting when user permissions are insufficient. But "Pop login screen" and "Hide object" are mutually exclusive.
@@ -123,8 +123,8 @@
  * **Pop login screen**
  ** Every time: Userlogin screen will pop-up when user permissions are insufficient;
  ** When change user: Userlogin screen will pop-up when user permissions, and if users logged in successfully, the previous users will log out.
--** Pop once: Userlogin screen will pop-up when user permissions are insufficient, but when user enter the right password, this object can be operated by anyone.
--* **Hide object: **When the user has no permission, the object is hidden. When the user has permission, the object is displayed and can be operated.
++** Pop once: userlogin screen will pop-up when user permissions are insufficient, but when user enter the right password, this object can be operated by anyone.
++* **Hide object: **When the user has no permission, the object is hided. When the user has the permission, the object is displayed and can be operated.
  === Animation ===
@@ -143,7 +143,7 @@
  For example: If the proportional gain value is x and the moving or scaling value is y, then the actual moving or scaling value is (x*y).
--**Movement**
++**(Movement**
  The function of [Movement] is to move the position of object on the screen according to the value of address and movement type.
@@ -159,7 +159,7 @@
  **Deform**
--Deform object display size on screen mainly depends on width and height.
++Deform object display size on screen, mainly depends on width and height.
  Deform type: left, right, up, down, left and right, up and down, right/left and up/down, right/left or up/down.
@@ -175,7 +175,7 @@
  |(% style="width:207px" %)PLC address/station NO.|(% style="width:868px" %)Set the device station NO. to access. If default station NO. is selected, then the station NO. is the de  The station number is the default station number for "Connection"  settings in "System Parameters".
  |(% style="width:207px" %)User input|(% style="width:868px" %)The address is not from address library, but a string.
  |(% style="width:207px" %)From address Library|(% style="width:868px" %)The address is selected from address library. If there is no data in address library, it is invalid.
--|(% style="width:207px" %)System address|(% style="width:868px" %)Display all the items of address library. The current one is the address referenced by the object.
++|(% style="width:207px" %)System address|(% style="width:868px" %)Display all the items of address library. The currently one is the address referenced by the object.
  |(% style="width:207px" %)Connection|(% style="width:868px" %)PLC that already exists in the project.
  |(% style="width:207px" %)Address type|(% style="width:868px" %)The address type or internal register type included in the PLC selected by the project.
  |(% style="width:207px" %)Address NO.|(% style="width:868px" %)To input address NO.
@@ -196,23 +196,22 @@
  **Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_273aed06eb8f10f9.gif||class="img-thumbnail"]]
--**Address**: Monitoring and display the address status.
++**(1) Address**: It is for setting specified PLC or HMI bit address。
--**Hide**
++**(2) Hide**
--* **Inverted Display: **Display reverse state of the picture and text. For example, the value of write address is on (Corresponding to state 1), while the graphic of off (Corresponding to state 0) is displayed.
--* **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
--* **Blink: **Blink condition;
--** Blink when ON: blink when read address is ON.
--** Blink when OFF: blink when read address is OFF.
--* **Hide: **Control the hide status of object via Control Bit's state. Hide object cannot be operated at all.
--* **Control Bit: **Hide condition.
--** **Hide when OFF**: Hide when control bit is OFF.
--** **Hide when ON**: Hide when control bit is ON.
--** **Invisible:** Object is always keeps hidden during project running.
++* **Inverted Display: **Display reverse state of the picture and text. *for example, the value of write address is set ON, the OFF mode is displayed.
++* **Blinking: **Blinking while control bit is triggered, the frequency is editable;
++** Blink when ON: blink when control bit is ON.
++** Blink when OFF: blink when control bit is OFF.
++* **Hide: **Display or hide object by "Control Bit" state.
++* **Control bit: **For hide control.
++** **Hide mode: **hide when OFF; hide when ON;it could not operate if [Invisible] is checked.
++** **Invisible:** object keeps hidden during project running.
  (% class="box infomessage" %)
  (((
@@ -357,7 +357,7 @@
  * **Next:** Switch to the next screen in the screen list;
  * **Go back: **Switch to the previous operating screen;
  * **Close sub screen:** Close current sub screen;
--* **Instalment screen:** Pop-up installment setting screen, only valid when the installment is enabled;
++* **Instalment screen:** Pop-up instalment setting screen, only valid when the instalment is enabled;
  * **Flash data to Udisk: **Copy data file from HMI Flash to Udisk, alarm, data record and recipe files could be copied;
  (% style="text-align:center" %)
@@ -373,7 +373,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_a68f2b0b1bf2758c.gif||class="img-thumbnail"]]
--**Using trigger address**. As the figure above, when 00 is ON, then selected operation of the function switch will be executed.
++**Using trigger address**. As the figure above,when 00 is ON,then selected operation of the function switch will be executed.
  **All terminals effect**. When this function is enabled, all terminals (screens, mobile phones, ipads, computers, etc.) will execute the function Switch Function simultaneously. For example, the screens of each terminal are different. When the screen is clicked to jump to the "Home" screen, all terminals will jump to the home screen.
@@ -382,11 +382,11 @@
  ✎**Note:**
 . Some special characters like \ : * ? “ <> | are not allowed in file path, otherwise an error (the following characters could not be included in the file name.| >< : * “ ? \) may occur.
--1. If you use SD card which HMI doesn't support, then you select the SD card as path,an error may occur.
--1. When users save directory, source path and destination path should end with [/], such as: [data/].
++1. If you use SD card which HMI does't support, then you select the SD card as path,an error may occur.
++1. When users save directory ,source path and destination path should end with [/], such as: [data/].
  * If source path or destination path is empty, there will be an error: [please set source and destination paths].
--* If source path or destination path contain more than two consecutive [/], there will be an error: [invalid path].
++* If source path or destination path contain more than two consecutive [/],there will be an error: [invalid path].
  (% start="4" %)
 . When users save specified file, it is necessary to set specified file path and file name. Such as: "data/a.txt". If there is no file name in path, there will be an error: "please set source path!" or "Please set destination path!"
@@ -395,7 +395,7 @@
  == Combination switch ==
--The combination switch supports the collection of multiple functions onto one object. When the object is pressed, multiple functions are arranged in sequence to meet the special requirements of the user.
++The combination switch supports the collection of multiple functions onto one object. When the object is pressed, multiple functions are arranged in sequence to meet the special requirements of user.
  The combination switch contains sub-functions such as bit operation, word operation, arithmetic and screen change. Click the corresponding button on the "General" of the object to add sub-functions to the list, and up to 100 sub-functions can be added.
@@ -433,7 +433,7 @@
  **Word addresses length: **The length of operated addresses.
--* If "Target word address" is 40, "Type" is Word set, and operand is 10, the length is 3 when pressing the button, the 40~~42 will be 10.
++* If "Target word address" is 40, "Type" is Word set,and operand is 10,the length is 3,when press the button,the 40~~42 will be 10.
  **Arithmetic**
@@ -473,46 +473,46 @@
  * **Run times: **Configuration sub-function execute times. 0 means unlimited times.
  * **Break:** Stop executing sub-function when trigger address is ON.
--(% class="box infomessage" %)
--(((
  ✎**Note:**
  * Nested patterns of object cycle and sub-function cycles are as follows.
--** The cycle time is independent.
++** The cycle time are independent.
  ** The object performs one cycle, all the sub-functions would be performed once.
--** If the object cycle ends earlier than the sub-function cycle, the sub-function would complete the remaining number of cycles.
--** If the object cycle ends later than the sub-function cycle, the sub-function cycle would be triggered again.
++** If the object cycle ends earlier than the sub-function cycle, and the sub-function would completes the remaining number of cycles.
++** If the object cycle ends later than the sub-function cycle, and the sub-function cycle would be triggered again.
  ** If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.
  * For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
  == Slider switch ==
  Slide switch is a special switch object. By changing the position of the slider, the corresponding address value would be changed. At the same time, the slider position will change according to the address value.
++**Description**
++
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_cc27b49cc3421a77.gif||class="img-thumbnail"]]
--**Attributes:**
++**(1) Attributes:**
--* **Write address:** The address needs to be written and monitored
--* **Data format: **Support 16-bit signed / unsigned decimal number, 32-bit signed / unsigned decimal number, floating number is not supported.
++1. **Write address:** The address needs to be written and monitored
++1. **Data format: **Support 16-bit signed / unsigned decimal number, 32-bit signed / unsigned decimal number, floating number is not supported.
--**Scale range:**
++**(2) Scale range:**
--* **Upper/lower limit: **The range of data that can be manipulated by the slider. The value is scaled according to the decimal place of the data format.
--* **Variable range: **When this function is checked, the value of the filling address will be used as the upper and lower limits of the scale.
--* **Display upper/lower limit:** When this function is checked, the upper and lower limit data will be displayed in the slide switch.
++1. **Upper/lower limit: **The range of data that can be manipulated by the slider. The value is scaled according to the decimal place of the data format.
++1. **Variable range: **When this function is checked, the value of the filling address will be used as the upper and lower limits of the scale.
++1. **Display upper/lower limit:** When this function is checked, the upper and lower limit data will be displayed in the slide switch.
--**Function:**
++**(3) Function:**
--* **Direction:** The slide switch provides four directions: from top to bottom, bottom to top, left to right, and right to left.
--* **Min. scale: **The minimum scale unit when the slider is moved. The value is scaled according to the format. (Need to drag to move)
--* **Scroll value: **The smallest unit of scale when the slider is moved. This value is scaled according to the format. (Need to drag to move)
--* **Write address: **Display current value: Show the current value of the device address above the slider
--* **Write immediately : **Write the value of the slide switch during the sliding process to the device address in real time.
--* **Alarm value:** input the alarm value
--* **Alarm color : **When "Alarm color" is ticked off, and the value of the device address reaches "Alarm value", the foreground color of the slide switch will be displayed as a warning color.
++1. **Direction:** The slide switch provides four directions: from top to bottom, bottom to top, left to right, and right to left.
++1. **Min. scale: **The minimum scale unit when the slider is moved. The value is scaled according to the format. (Need to drag to move)
++1. **Scroll value: **The smallest unit of scale when the slider is moved. This value is scaled according to the format. (Need to drag to move)
++1. **Write address: **Display current value: Show the current value of the device address above the slider
++1. **Write immediately : **Write the value of the slide switch during the sliding process to the device address in real time.
++1. **Alarm value:** input the alarm value
++1. **Alarm color : **When "Alarm color" is ticked off, and the value of the device address reaches "Alarm value", the foreground color of the slide switch will be displayed as a warning color.
  (% class="box infomessage" %)
  (((
@@ -522,15 +522,15 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_65b8338bfb56a238.gif||class="img-thumbnail"]]
--**Slide rail**
++**(4) Slide rail**
--* **Border color: **Tick off to display the border color
--* **Foreground color: **The color of the slide rail where the slider slides over. If not checked, the color will be displayed transparently
--* **Background color: **The color of the slide rail where the slider does not slide over. If it is not checked, it will be displayed transparently.
--* **Height: **slide rail height
--* **Shape: **Set the style (right or rounded angle) of the rails
++1. **Border color: **Tick off to display the border color
++1. **Foreground color: **The color of the slide rail where the slider slides over. If not checked, the color will be displayed transparently
++1. **Background color: **The color of the slide rail where the slider does not slide over. If it is not checked, it will be displayed transparently.
++1. **Height: **slide rail height
++1. **Shape: **Set the style (right or rounded angle) of the rails
--**Slider**
++**(5) Slider**
  * **Color: **Tick off to display the slider color, otherwise it is displayed transparently.
  * **Shape: **Set the slider style (square or circle).
@@ -548,7 +548,7 @@
  ** The diameter of the circular slider is displayed as a percentage of the width of the object, and it is recommended that the diameter of the slider should be greater than or equal to 2 times the width of the slide rail.
  ** The width and height of the square slider are displayed as a percentage of the width of the object, and it is recommended that the width of the slider should be greater than or equal to the width of the slide rail.
--**Preview**: Display the setting result of slider switch.
++**(6) Preview**: Display the setting result of slider switch.
  (% class="box infomessage" %)
  (((
@@ -566,12 +566,12 @@
  (% style="text-align:center" %)
  [[image:6-1NumericInput.png||class="img-thumbnail"]]
--**General**
++**(1) General**
  * **Read Address:** The data from designated address will be displayed.
  * **Input: **Enable input function and "Write Address" configuration.
  * **Same read-write address:** Configure [Write Address] is the same as "Read Address".
--* **Write address: **Write data to designated address. The address could be different from "Read Address".
++* **Write address: **Write data to designated address. The address could be different "Read Address".
  * **Keypad:** it is standard numeric keypad, allow to input decimal and floating;
  (% class="box infomessage" %)
@@ -583,20 +583,20 @@
  * **NO: **the number of numeric input object;
  * **Group NO: **the group number of numeric input object;
--**Display**
++**(2) Display**
  (% style="text-align:center" %)
  [[image:6.Objects_html_a6448568aa9b4008.gif||class="img-thumbnail"]]
--* **Font:** It is located in font list; user could select font directly.
--* **Trim 0 display**: The last digit of the decimal only display the non-zero part, such as 6.30 will be displayed as 6.3.
--* **Input as "*":** The data is shown as "*".
++* **Font:** It is located to font list; user could select font directly.
++* **Trim 0 display**: The last digit of the decimal only display the non-zero part, such as: 6.30 will be displayed as 6.3.
++* **Input as "*":** the data shown as "*".
  * **Alignment:** There are three modes.
  * **Center:** data display on the center of object.
--* **Align left: **Data display on the left.
--* **Align right: **Data display on the right.
++* **Align left: **data display on the left.
++* **Align right: **data display on the right.
--**Data format**
++**(3) Data format**
  (% style="text-align:center" %)
  [[image:6.Objects_html_52ba758ebcea03f2.gif||class="img-thumbnail"]]
@@ -609,11 +609,11 @@
  * **Data format:** Configure data display format.
  * **Range:** beyond the data range will be not inputted.
--**Keypad position**
++**(4) Keypad position**
  It is used for setting keypad position when input data.
--**Label**
++**(5) Label**
  Configure label shown on the left/ right side of data.
@@ -665,7 +665,7 @@
  * **Align left: **data display on the left.
  * **Align right: **data display on the right.
  * **Exchange high-low byte: **Exchange High-low byte: Check it to exchange and display the contents of the high and low bytes. If the number of contents is not a multiple of 2, the rounding process will be performed.
--* **Length: **The length of characters, the maximum length is 256.
++* **Length: **The length for characters, the maximum length is 256.
  * **Exchange high-low word: **Check it to exchange and display the contents of high and low word. Only valid if the number of operating characters of the part is a multiple of 4.
  **Keypad position**
@@ -687,7 +687,7 @@
  **Introduction**
--This section will introduce common settings in Chart objects.
++This section will introduce common settings in Chart objects
  **Shape**
@@ -694,7 +694,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_9f4692cce1805843.gif||class="img-thumbnail"]]
--Set appearance of object, including background color, head color, text color, line color, select row color.
++Set appearance of object, includes background color, head color, text color, line color, select row color
  **Advance**
@@ -703,7 +703,7 @@
  * **Head text color**: It sets the text color of the header.
  * **Transparency**: It sets transparency of the table background, 0% represents full transparency, and 100% represents completely opaque.
--* **Cell type**: Default is adaptive width. After selecting customization, customization could set the width of the cell.
++* **Cell type**: Default is adaptive width. After select a customization, customization could set the width of the cell.
  * **Date and time format: **According to the needs to select the date and time display format. "NONE" means no display; please do not set both time and date to "NONE".
  **Function start address**
@@ -713,11 +713,11 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_361b1ee164769c5d.gif||class="img-thumbnail"]]
--The address you fill in is only the start address. This address, including 20 consecutive addresses after this address, will be occupied. Please organize your address to prevent unnecessary errors from being reused.
++The address you fill in is only as the start address. This address, including 20 consecutive addresses after this address, will be occupied. Please organize your address to prevent unnecessary errors from being reused.
--**For example,** HDW0 is the function start address, then the addresses HDW0 to HDW19 are occupied. If you need the power-down storage setting, you may set the address as the address of register HAW (HAW0 to HAW200000).
++**For example,** HDW0 is the function start address, then the addresses HDW0 to HDW19 are ocupied. IF you need the  power-down  storange setting, you may set the address as the address of register HAW (HAW0 to HAW200000) .
--If the start address is set as HDW0, the function and address table is as below.
++If the start address set as HDW0, the function and address table is as below.
  (% class="table-bordered" %)
  |=(% style="width: 277px;" %)**Address**|=(% style="width: 113px;" %)**Type**|=(% style="width: 158px;" %)**Object**|=(% colspan="2" style="width: 528px;" %)**Function**
@@ -732,9 +732,9 @@
  |(% style="width:277px" %)HDW8|(% style="width:113px" %)Word|(% style="width:158px" %)Word Switch|(% colspan="2" style="width:528px" %)(((
  Default as 1. It can contain 50 records per page
--Page Up: Current Value minus 1.
++Page Up : Current Value minus 1.
--Page Down: Current Value add 1.
++Page Down : Current Value add 1.
  Range: 1 to 65535
  )))
@@ -743,44 +743,20 @@
  HDW12
  (Bit address control up and down left and right display)
--)))|(% style="width:113px" %)HDW12.0|(% colspan="2" style="width:528px" %)(((
--Table type object: Move one page up
--
--History Trend Chart: Pop up query settings window
--)))
--|(% style="width:113px" %)HDW12.1|(% colspan="2" style="width:528px" %)(((
--Table type object: Move one row up
--
--History Trend Chart: Move one span down
--)))
--|(% style="width:113px" %)HDW12.2|(% colspan="2" style="width:528px" %)(((
--Table type object: Move one page down
--
--History Trend Chart: Move one span up
--)))
--|(% style="width:113px" %)HDW12.3|(% colspan="2" style="width:528px" %)(((
--Table type object: Move one row down
--
--History Trend Chart: Display/Hide slide bar
--)))
--|(% style="width:113px" %)HDW12.4|(% colspan="2" style="width:528px" %)(((
--Table type object: Move one page left
--
--History Trend Chart: Zoom in (Narrow time span down)
--)))
--|(% style="width:113px" %)HDW12.5|(% colspan="2" style="width:528px" %)(((
--Table type object: Move one column left
--
--History Trend Chart: Zoom out (Broaden time span up)
--)))
--|(% style="width:113px" %)HDW12.6|(% colspan="2" style="width:528px" %)Table type object: Move one page right
--|(% style="width:113px" %)HDW12.7|(% colspan="2" style="width:528px" %)Table type object: Move one column right
++)))|(% style="width:113px" %)HDW12.0|(% colspan="2" style="width:528px" %)Move one page up
++|(% style="width:113px" %)HDW12.1|(% colspan="2" style="width:528px" %)Move one row up
++|(% style="width:113px" %)HDW12.2|(% colspan="2" style="width:528px" %)Move one page down
++|(% style="width:113px" %)HDW12.3|(% colspan="2" style="width:528px" %)Move one row down
++|(% style="width:113px" %)HDW12.4|(% colspan="2" style="width:528px" %)Move one page left
++|(% style="width:113px" %)HDW12.5|(% colspan="2" style="width:528px" %)Move one column left
++|(% style="width:113px" %)HDW12.6|(% colspan="2" style="width:528px" %)Move one page right
++|(% style="width:113px" %)HDW12.7|(% colspan="2" style="width:528px" %)Move one column right
  |(% style="width:277px" %)HDX13.0|(% style="width:113px" %)Bit|(% colspan="2" style="width:528px" %)(((
  Span Method：
  ~=0: Use the Span Value and Span Unit to query;
--~=1: Use start time and end time to calculate the time span for query.
++~=1: Use start time to calculate the time interval of query.
  )))
  |(% style="width:277px" %)HDW14|(% style="width:113px" %)Word|(% rowspan="6" style="width:158px" %)Numeric Input|(% rowspan="6" style="width:237px" %)Effective when HDX13.0=1|(% style="width:291px" %)End Time: Year
  |(% style="width:277px" %)HDW15|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Month
@@ -789,8 +789,6 @@
  |(% style="width:277px" %)HDW18|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Minute
  |(% style="width:277px" %)HDW19|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Second
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * [Function address (20 words)] need to be HMI internal address;
@@ -797,16 +797,13 @@
  * When the start time and end time of the query are enabled, if the end time is smaller than the start time, the system automatically swaps the start and end times to calculate the span of the query;
  * After manually setting the start time and end time of the query, you need to manually update the data (the default will be automatically updated);
--
--)))
--
  **Appearance**
  (% style="text-align:center" %)
  [[image:6.Objects_html_71f505c7146db030.gif||class="img-thumbnail"]]
--* **Background type:** There are four modes, style 1 and style 2 are gradient mode, style 3 is solid color mode, and style 4 is transparent.
--* **Transparency:** transparency could be set from 0% to 100%. when set to 0%, the background is completely transparent.
++* **Background type:** There are four modes, style 1 and style 2 is gradient mode, style 3 is solid color mode, style 4 is transparent.
++* **Transparency:** transparency could be set from 0% to 100%. when set to 0%,the background is completely transparent.
  * **Position: **Show position coordinates for X and Y axes.
  * **Size: **Set object size.
@@ -813,7 +813,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_64c6da58525278cb.gif||class="img-thumbnail"]]
--* **Number of X, Y axis: **Set the number of grids on the XY axis could be set from 1 to 10 divisions.
++* **Number of X,Y axis: **Set the number of grids on the XY axis could be set from 1 to 10 divisions.
  * **Color setting: **Color1 is for object frame;color2 is for grid background.
  * **Show dot:** Display the data points of each trend graph.
  * **User font: **If check it, user could change the font for grid and time, if uncheck it, object uses build-in font.
@@ -830,10 +830,10 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_d5d647f7cb216d8f.gif||class="img-thumbnail"]]
--* **Time type:** There are two time displaying type, one is only displaying the start and end time, and the other is displaying time for each cell.
--* **Curve Fitting (XY)**
--* **Line type:** Set the line type (line, curve) between two points.
--* **Smoothness:** it sets the smoothness of curve. Smoothness sets the curve smoothness. Conversely, the corner of the curve is sharper.
++1. **Time type:** There are two time displaying type, one is only displaying the start and end time, and the other is displaying time for each cell.
++1. **Curve Fitting (XY)**
++1. **Line type:** Set the line type (line, curve) between two points.
++1. **Smoothness:** it sets the smoothness of curve. Smoothness sets the curve smoothness. Conversely, the corner of the curve is sharper.
  == Real-time trend chart ==
@@ -842,7 +842,7 @@
  **Source**
  * **Curve buffer: **Select data from and display data in term of curve.
--* **Curve displays:** HMI will display curves according to select “Trend Chart“, and user could select which curves need to be displayed and select “Line type“ and “Color“ for each curve.
++* **Curve displays:** HMI will display curves according to select [Trend Chart], and user could select which curves need to be displayed and select [Line type] and [Color]for each curve.
  (% style="text-align:center" %)
  [[image:image-20220616160423-7.png]]
@@ -894,16 +894,16 @@
  (% style="text-align:center" %)
  [[image:image-20220802113935-1.gif]]
--There are 8 buttons will display below the graph, shown as following.
++There are 8 buttons will display in below the graph, shown as following.
 . [[image:image-20220616162002-15.jpeg]] Historical trend chart query button
 . [[image:image-20220616162008-16.png]] ** **Set the time and span of historical trend chart
 . [[image:image-20220616162013-17.png]] ** **Refresh
 . [[image:image-20220616162018-18.png]] ** **Move forward by span time
--1. [[image:image-20220616162021-19.png]] **: **Move backwards by span time
--1. [[image:image-20220616162025-20.png]] : Slider display control button, slider position can display the current time and the current numerical status of each curve.
++1. [[image:image-20220616162021-19.png]] **:**Move backwards by span time
++1. [[image:image-20220616162025-20.png]] :Slider display control button, slider position can display the current time and the current numerical status of each curve.
 . [[image:image-20220616162028-21.png]]  Zoom in by one time according to the length of the span.
--1. [[image:image-20220616162032-22.png]] : Zoom out by one time according to the length of the span.
++1. [[image:image-20220616162032-22.png]] :Zoom out by one time according to the length of the span.
  (% class="box infomessage" %)
  (((
@@ -910,7 +910,7 @@
  **✎Note: **For the setting of historical trend chart, please refer to "[[Trend chart>>path:https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HTrendchart]]".
  )))
--== Alarm record display ==
++== **Alarm record display** ==
  Display current alarm and history alarm information.After setting the time span, the history alarm record will list by the time span.
@@ -919,20 +919,20 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_680530096b569128.gif||class="img-thumbnail"]]
--**Settings**
++**(1) Settings**
  (% style="text-align:center" %)
  [[image:6.Objects_html_ae2b58548526a788.gif||class="img-thumbnail"]]
--* **Alarm type: **There are two types for alarm function; one is [Current alarm record] and the other is "History alarm record".
--* **Group No:** This group number is corresponding to ID from Alarm settings; this object only displays the alarm content within this ID range.
--* **Display in reverse order: **The latest alarm information will be displayed at the top of object.
--* **Alarm Record Setting**: This is for setting display items in object, the setting window as below shows.
++1. **Alarm type: **There are two types for alarm function; one is [Current alarm record] and the other is "History alarm record".
++1. **Group No:** This group number is corresponding to ID from Alarm settings; this object only displays the alarm content within this ID range.
++1. **Display in reverse order: **The latest alarm information will be displayed at the top of object.
++1. **Alarm Record Setting**: This is for setting display items in object, the setting window as below shows.
  (% style="text-align:center" %)
  [[image:6.Objects_html_c39789a001b0224e.gif||class="img-thumbnail"]]
--**Query Settings**
++**(2) Query Settings**
  There are two modes for this settings, one is "Page control", and the other is "Use function address".
@@ -949,12 +949,9 @@
  * ...
  * 40=10 means this object display 10th page.
--(% class="box infomessage" %)
--(((
  **✎Note:** Every page contains 50 records.
--)))
--**Start Time**
++**(3) Start Time**
  It configures start query time and span.
@@ -972,30 +972,20 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_de2952171d05accd.gif||height="312" width="567" class="img-thumbnail"]]
--* [[image:6.Objects_html_92e1910330039a59.gif||height="49" width="48" class="img-thumbnail"]] Query setting
--* [[image:6.Objects_html_4efc52d4a7f1ea02.gif||height="49" width="49" class="img-thumbnail"]] Refresh page
--* [[image:image-20220808142509-1.png||height="48" width="49" class="img-thumbnail"]]means moving up one row
--* [[image:image-20220808142518-2.png||height="49" width="50" class="img-thumbnail"]]means page up.
--* [[image:image-20220808142538-3.png||height="45" width="49" class="img-thumbnail"]] means moving down one row.
--* [[image:image-20220808142546-4.png||class="img-thumbnail"]] means page down.
--* [[image:image-20220808142603-5.png||class="img-thumbnail"]] means moving left column.
--* [[image:image-20220808142610-6.png||class="img-thumbnail"]]means moving the display to the left.
--* [[image:image-20220808142623-7.png||class="img-thumbnail"]]means moving right column.
--* [[image:image-20220808142630-8.png||class="img-thumbnail"]]means moving the display to right.
++* [[image:6.Objects_html_92e1910330039a59.gif||class="img-thumbnail"]] Query setting
++* [[image:6.Objects_html_4efc52d4a7f1ea02.gif||class="img-thumbnail"]] Refresh page
++* Up operation buttons: [^] means moving up one row; [︽] means page up.
++* Down operation buttons: [˅] means moving down one row; [︾] means page down.
++* Left operation buttons: [<] means moving left column; [<<] means moving the display to the left.
++* Right operation buttons: [>] means moving right column; [>>] means moving the display to right.
--(% class="box infomessage" %)
--(((
  **✎Note:** Please click here to set "[[Bit alarm>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HBitalarm]]" and "[[Word alarm>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HWordalarm]]".
--)))
--== Data record display ==
++== **Data record display** ==
  "Data Record Display" displays the value of the address set by the user in the data record in the form of a table. It provides the function of query. You could query all the recored data within a specified period. If the project does not edit data recored area or there is no historical data, data record would display nothing. You can dynamically set the query period on the HMI and save the power failure.
--(% class="box infomessage" %)
--(((
  ✎**Note: **The objects sunch as tables and trends charts are only support **"**song typeface". It is invalid if you set other fonts.
--)))
  This object only displays content normally after the "[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Data record__>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HDatarecord]](%%)" function is set.
@@ -1002,7 +1002,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_2ee00a2b90c062f6.gif||class="img-thumbnail"]]
--**Record**
++**(1) Record**
  There are data of multiple groups could be set in the data record, but it could only display the data of one group at the same time. Therefore, during configuring, user need to specify the corresponding data record group number for each object.
@@ -1009,11 +1009,11 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_7d03f28e9a7ec548.gif||class="img-thumbnail"]]
--**Display in reverse order**
++**(2) Display in reverse order**
--It sorts by time by default. The oldest data record will be displayed at the top of it. If you check  "Display in reverse order", the latest data record will be displayed at the top.
++It sorts by time by default. The oldest data record will be displayed at the top of it. If you check  "Display in reverse order", The latest data record will be displayed at the top of it
--**Start Time**
++**(3) Start Time**
  (% style="text-align:center" %)
  [[image:6.Objects_html_d2335d95f27b8e03.gif||class="img-thumbnail"]]
@@ -1020,13 +1020,13 @@
  You can configure the start query time. Set the time span from start time to end time of query.
--**Security**
++**(4) Security**
  (% style="text-align:center" %)
  [[image:6.Objects_html_3235c433cffea00f.gif||class="img-thumbnail"]]
--* **Channel control address:** It continuously occupies 8-word addresses, the first 100-bit addresses control 100 channels of display/hide function. For example, if the address is set to HDW10, then HDX10.0=1 is hidden channel 1; HDX10.1=1 is hidden channel 2, and so on.
--* **Freeze first column:** Enable it, the first column (time column) of the data record will not move with the left and right pages.
++1. **Channel control address:** It continuously occupies 8-word addresses, the first 100-bit addresses control 100 channels of display/hide function. For example, if the address is set to HDW10, then HDX10.0=1 is hidden channel 1; HDX10.1=1 is hidden channel 2, and so on.
++1. **Freeze first column:** Enable it, the first column (time column) of the data record will not move with the left and right pages.
  For details about "function address", see "[[Common settings in chart objects>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCommonsettings]]".
@@ -1059,123 +1059,140 @@
  (% style="text-align:center" %)
  [[image:配方 1.png||class="img-thumbnail"]]
--**Function (Recipe File)**
++**(1) Function (Recipe File)**
--* **File type: **There are more than one function in this object, this is for selecting function, select "Recipe File", when "Recipe function" is set, it will display recipe data in the form of a table.
--* **Folder name:** This is located to recipe function setting.
--* **Select line:** Select one line in list and display its line No. in this address.（Note：When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying the line No.）
--* For example, set 40,
--** if 40=1, the first row of object is selected.
--** If 40=2, the second row of object is selected.
--** ...
--** If 40=10, the 10th row of object is selected.
--* **Folder name address: **This is for setting recipe file name, in advance recipe mode.
++1. **File type: **There are more than one function in this object, this is for selecting function, select "Recipe File", when "Recipe function" is set, it will display recipe data in the form of a table.
++1. **Folder name:** This is located to recipe function setting.
++1. **Select line:** Select one line in list and display its line No. in this address.（Note：When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying the line No.）
++       For example, set 40,
++
++* if 40=1, the first row of object is selected.
++* If 40=2, the second row of object is selected.
++* ...
++* If 40=10, the 10th row of object is selected.
++
++(% start="4" %)
++1. **Folder name address: **This is for setting recipe file name, in advance recipe mode.
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_38f1820209eedfb4.gif||class="img-thumbnail"]]
--**Function (Operating Record)**
++**(2) Function (Operating Record)**
  (% style="text-align:center" %)
  [[image:6.Objects_html_d6c16aee84067851.gif||class="img-thumbnail"]]
--* **File type: **There are more than one function in this object, this is for selecting function, select [Operating Record], when [User Permission] is enabled, the operation record of each user in HMI is recorded and displayedin the form of a table, and the time and date display format could be set as needed.
--* **Select line: **Set address for select row.
++1. **File type: **There are more than one function in this object, this is for selecting function, select [Operating Record], when [User Permission] is enabled, the operation record of each user in HMI is recorded and displayedin the form of a table, and the time and date display format could be set as needed.
++1. **Select line: **Set address for select row.
--**Function (Timeout Alert)**
++**(3) Function (Timeout Alert)**
  (% style="text-align:center" %)
  [[image:6.Objects_html_35cc911c850c1afb.gif||class="img-thumbnail"]]
--* **File type:** There are more than one function in this object, this is for selecting function, select [Timeout], it displays the current HMI project communication timeout information. (The built-in screen has this special function; it will pop up automatically when timeout, users do not need to set).
--* **Select line: **Set address for select row.
++1. **File type:** There are more than one function in this object, this is for selecting function, select [Timeout], it displays the current HMI project communication timeout information. (The built-in screen has this special function; it will pop up automatically when timeout, users do not need to set).
++1. **Select line: **Set address for select row.
--**Function (Client Manage)**
++**(4) Function (Client Manage)**
  (% style="text-align:center" %)
  [[image:6.Objects_html_9ec936a372bb7efb.gif||class="img-thumbnail"]]
--* **File type: **There are more than one functions in this object, this is for selecting function, select [Client manage], it displays the current visitors' screens information.
--* **Select line:** Set address for select row.
++1. **File type: **There are more than one functions in this object, this is for selecting function, select [Client manage], it displays the current visitors' screens information.
++1. **Select line:** Set address for select row.
--**Function (User Manage)**
++**(5) Function (User Manage)**
  (% style="text-align:center" %)
  [[image:6.Objects_html_59dc786401ea6651.gif||class="img-thumbnail"]]
--* **File type:** There are more than one functions in this object, this is for selecting function, select [User Manage],when [User Permission] is enabled, it displays all users' information.
--* **Select line: **Set address for select row.
--* **Refresh: **Set address for refresh users list; (bit address).
++1. **File type:** There are more than one functions in this object, this is for selecting function, select [User Manage],when [User Permission] is enabled, it displays all users' information.
++1. **Select line: **Set address for select row.
++1. **Refresh: **Set address for refresh users list; (bit address).
--**Function (System Message)**
++**(6) Function (System Message)**
  (% style="text-align:center" %)
  [[image:6.Objects_html_858d4ec965274b8a.gif||class="img-thumbnail"]]
--* **File type: **There are more than one function in this object, this is for selecting function, select [System message], when event occurs, it displays prompt messages automatically.
--* **Select line: **Set address for select row.
++1. **File type: **There are more than one functions in this object, this is for selecting function, select [System message],when event occurs, it displays prompt messages automatically.
++1. **Select line: **Set address for select row.
--**Address Control**
++**(7) Address Control**
--* **Start group: **Control displaying start from specified row, which means display from specified group.
--* For example, set 40
--** If 40=1, Start from first row (first group).
--** If 40=2, Start from second row (second group).
--** ...
--** If 40=10, Start from 10th row (10th group).
--* **Group number address: **Control the number of rows displayed;
--* For example, set 410
--** If 410=1, this object only displays 1 row (1 group).
--** If 410=2, this object displays 2 rows (2 groups).
--** ...
--** If 410=10, this object displays 10 rows (10 groups).
--* **Start address: **Control displaying start from specified column, which means display from specified member.
--* For example, set 420,
--** If 420=1, Start from first column (first member).
--** If 420=2, Start from second column (second member).
--** ...
--** If 420=10, Start from 10th column (10th member).
--* **Address number: **Control the number of columns displayed.
--* For example, set 430,
--** If 430=1, this object only displays 1 column (1 member).
--** If 430=2, this object displays 2 columns (2 members).
--** ...
--** If 430=10, this object displays 10 columns (10 members).
--* **Result**: When all configurations are completed, when the HMI is running, object will display like below.
++**Start group: **control displaying start fromspecified row, which means display from specified group.
--**Recipe**
++For example set 40,
++* If 40=1, Start from first row (first group).
++* If 40=2, Start from second row (second group).
++* ...
++* If 40=10, Start from 10th row (10th group).
++
++**Group number address: **Control the number of rows displayed;
++
++For example set 410,
++
++* If 410=1, this object only displays 1 row (1 group).
++* If 410=2, this object displays 2 rows (2 groups).
++* ...
++* If 410=10, this object displays 10 rows (10 groups).
++
++**Start address: **Control displaying start fromspecified column, which means display from specified member.
++
++For example, set 420,
++
++* If 420=1, Start from first column (first member).
++* If 420=2, Start from second column (second member).
++* ...
++* If 420=10, Start from 10th column (10th member).
++
++**Address number: **Control the number of columns displayed.
++
++For example, set 430,
++
++* If 430=1, this object only displays 1 column (1 member).
++* If 430=2, this object displays 2 columns (2 members).
++* ...
++* If 430=10, this object displays 10 columns (10 members).
++
++**Result**
++
++When all configurations are completed, when the HMI is running, object will display like below.
++
++**(1) Recipe**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_73ddff1c47ca6b37.gif||height="271" width="567" class="img-thumbnail"]]
--**Operating Record**
++**(2) Operating Record**
  (% style="text-align:center" %)
  [[image:6.Objects_html_6d72e0a32128f87a.gif||height="413" width="567" class="img-thumbnail"]]
--**Client Manage**
++**(3) Client Manage**
  (% style="text-align:center" %)
  [[image:6.Objects_html_ea2cd87aaa6600cd.gif||height="413" width="567" class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
  (% class="wikigeneratedid" %)
  **✎Note:**
  * If the file type is recipe file, modify the value of the address of "Select line" to control the selected line in the display list to the corresponding line. If another file type is selected, this address can only display the selected line (read-only mode).
--* For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. The options of them will no longer be displayed in the record.
++* For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. They options of them will no longer be displayed in the record.
  * For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
--)))
  == **File list** ==
  "File List" displays the recipe file name of the current project in the form of table in HMI. If there is no recipe file in the project, the table of the object is empty. (Table and trend chart objects currently only support Song Typeface, other fonts you set will not work.
--Recipe files in "Flash", and also shows custom folder information.
++recipe files in "Flash", and also shows custom folder information.
--**Function (Recipe File)**
++**Description**
++**(1) Function (Recipe File)**
++
  (% style="text-align:center" %)
  [[image:文件列表 1.png||class="img-thumbnail"]]
@@ -1182,46 +1182,50 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_66cd30b2b962a04e.gif||class="img-thumbnail"]]
--* **File type: **[Recipe File] is for displaying recipe files in Flash.
--* **Folder name:** This is located to recipe function setting.
--* **Select line:** Select one line in list and display its line No. in this address.
--* For example, set 40,
--** if 40=1, the first row of object is selected.
--** If 40=2, the second row of object is selected.
--** ...
--** If 40=10, the 10th row of object is selected.
++1. **File type: **[Recipe File] is for display recipe files in Flash.
++1. **Folder name:** This is located to recipe function setting.
++1. **Select line:** Select one line in list and display its line No. in this address.
--(% class="box infomessage" %)
--(((
--✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying line No.
--)))
++      For example, set 40,
--* **Folder name address:** This is for setting recipe file name, in advance recipe mode.
++* if 40=1, the first row of object is selected.
++* If 40=2, the second row of object is selected.
++* ...
++* If 40=10, the 10th row of object is selected.
--**Function (Custom Folder)**
++✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying the line No.
++(% start="4" %)
++1. **Folder name address:** This is for setting recipe file name, in advance recipe mode.
++
++**(2) Function (Custom Folder)**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_8cb7b2547b5e5c65.gif||class="img-thumbnail"]]
--* **File type: **The object displays files under the specified path.
--* **Root:** It means storage; there are three options, "Flash", "Udisk" and "SDcard".
--* **Folder:** Set folder name, such as recipe.
--* **Select line: **Set address for select row.
--* For example, set 40,
--** if 40=1, the first row of object is selected.
--** If 40=2, the second row of object is selected.
--** ...
--** If 40=10, the 10th row of object is selected.
--* **Folder name address:** This is for setting recipe file name, in advance recipe mode;
++1. **File type: **The object displays files under the specified path.
++1. **Root:** It means storage; there are three options, "Flash", "Udisk" and "SDcard".
++1. **Folder:** Set folder name, such as recipe.
++1. **Select line: **Set address for select row.
--**Use function address (20 words)**
++      For example, set 40,
++* if 40=1, the first row of object is selected.
++* If 40=2, the second row of object is selected.
++* ...
++* If 40=10, the 10th row of object is selected.
++
++(% start="5" %)
++1. **Folder name address:** This is for setting recipe file name, in advance recipe mode;
++
++**(3) Use function address (20 words)**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_dc49c7d7148792b3.gif||class="img-thumbnail"]]
--Function address includes copy, paste, delete, and rename. And HMI automatically assigns the functions to bit addresses.
++Function address includes copy, past, delete and rename. And HMI automatically assigns the functions to bit addresses.
--For example, if the function address is HDW 90, the detailed information is below.
++For example, if the function address is HDW 90, the detailed information as below.
  (% class="table-bordered" %)
  |**Address**|**Address type**|**Object type**|**Function**
@@ -1241,10 +1241,8 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_a68643b928e3930.gif||class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
++(% class="wikigeneratedid" %)
  ✎**Note: **For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".
--)))
  == **XY plot** ==
@@ -1253,12 +1253,12 @@
  (% style="text-align:center" %)
  [[image:XY 1.png||height="573" width="567" class="img-thumbnail"]]
--**Source**
++**(1) Source**
--* **Auto Sample:** Select data from [XY plot] and displayed in a curve according to the set time.
--* **Trigger Sample: **When the trigger address is set, the data is collected and displayed in a curve. After the data is collected, the trigger address is automatically reset.
++1. **Auto Sample:** Select data from [XY plot] and displayed in a curve according to the set time.
++1. **Trigger Sample: **When the trigger address is set, the data is collected and displayed in a curve. After the data is collected, the trigger address is automatically reset.
--**Curve settings: **According needs to set style and color for each curve.
++**(2) Curve settings: **According needs to set style and color for each curve.
  **Read address:** *for example, PLC word address is D, it points number is m. (point numbers no more than 800).
@@ -1272,23 +1272,24 @@
  Because if the number of XY points is m, it is necessary to continuously read 2m words from the address D of the PLC to draw a complete XY picture.
--**Appearance**
++**(2) Appearance**
  (% style="text-align:center" %)
  [[image:XY 2.png||class="img-thumbnail"]]
--* **X grids and Y grids:** The range is from 1 to 10.
--* **color setting:**
--** Background color 1 indicates the background color of appearrance.
--** Background color 2 indicates the background color of grid.
++1. **X grids and Y grids:** The range is from 1 to 10.
++1. **color setting:**
--**Range**
++* Background color 1 indicates the background color of appearrance.
++* Background color 2 indicates the background color of grid.
++**(3) Range**
++
  (% style="text-align:center" %)
  [[image:XY 3.png||height="312" width="567" class="img-thumbnail"]]
--* **Variable:** The data range for the graph could be set as a variable.
--* **X, Y Limit:** Set the max and min value of displaying curve.
++1. **Variable:** The data range for the graph could be set as a variable.
++1. **X, Y Limit:** Set the max and min value of displaying curve.
  **Result**
@@ -1298,7 +1298,7 @@
  [[image:6.Objects_html_d86b49376aa4f4dd.gif||height="336" width="567" class="img-thumbnail"]]
  (% class="wikigeneratedid" %)
--**Quick setting:** Fill in the starting address, according to the parameter settings, automatic allocation of addresses.
++**(4) Quick setting:** Fill in the starting address, according to the parameter settings, automatic allocation of addresses.
  == **History XY plot** ==
@@ -1307,89 +1307,96 @@
  (% style="text-align:center" %)
  [[image:历史XY 1.png||class="img-thumbnail"]]
--**Source**
++**(1) Source**
--* **Auto Sample:** Select data from [XY plot] and displayed in a curve according to the set time.
--* **Trigger Sample: **When the trigger address is set, the data is collected and displayed in a curve. After the data is collected, the trigger address is automatically reset.
++1. **Auto Sample:** Select data from [XY plot] and displayed in a curve according to the set time.
++1. **Trigger Sample: **When the trigger address is set, the data is collected and displayed in a curve. After the data is collected, the trigger address is automatically reset.
--**Curve settings: **According needs to set style and color for each curve.
++**(2) Curve settings: **According needs to set style and color for each curve.
--* **Read address:** *for example, PLC word address is D, it points number is m. (point numbers no more than 800).
--** Word address D is the X coordinate of the first point.
--** Word address D+1 is the Y coordinate of the first point.
--** Word address D+2 is the X coordinate of the second point.
--** Word address D+3 is the Y coordinate of the second point.
--** ......
--** Word address D+2m-1 is the X coordinate of the m^^th^^ point.
--** Word address D+2m is the Y coordinate of the m^^th^^ point.
++**Read address:** *for example, PLC word address is D, it points number is m. (point numbers no more than 800).
++* Word address D is the X coordinate of the first point.
++* Word address D+1 is the Y coordinate of the first point.
++* Word address D+2 is the X coordinate of the second point.
++* Word address D+3 is the Y coordinate of the second point.
++* ......
++* Word address D+2m-1 is the X coordinate of the m^^th^^ point.
++* Word address D+2m is the Y coordinate of the m^^th^^ point.
++
  Because if the number of XY points is m, it is necessary to continuously read 2m words from the address D of the PLC to draw a complete XY picture.
--**Appearance**
++**(2) Appearance**
  (% style="text-align:center" %)
  [[image:XY 2.png||class="img-thumbnail"]]
--* **X grids and Y grids:** The range is from 1 to 10.
--* **color setting:**
--** Background color 1 indicates the background color of appearrance.
--** Background color 2 indicates the background color of grid.
++1. **X grids and Y grids:** The range is from 1 to 10.
++1. **color setting:**
--**Range**
++* Background color 1 indicates the background color of appearrance.
++* Background color 2 indicates the background color of grid.
++**(3) Range**
++
  (% style="text-align:center" %)
  [[image:XY 3.png||height="312" width="567" class="img-thumbnail"]]
--* **Variable:** The data range for the graph could be set as a variable.
--* **X, Y Limit:** Set the max and min value of displaying curve.
++1. **Variable:** The data range for the graph could be set as a variable.
++1. **X, Y Limit:** Set the max and min value of displaying curve.
--**Result**: When all configurations are completed, when the HMI is running, it displays as shown below.
++**Result**
++When all configurations are completed, when the HMI is running, it displays as shown below.
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_d86b49376aa4f4dd.gif||height="336" width="567" class="img-thumbnail"]]
  (% class="wikigeneratedid" %)
--✎**Note:** For the setting details, please refer to "[[History XY plot>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HHistoryXYplot]]".
++✎**Note:**
--== Disc record chart ==
++(% class="wikigeneratedid" %)
++For the setting details, please refer to "[[History XY plot>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HHistoryXYplot]]".
++== **Disc record chart** ==
++
  The Disc Record displays the data from data source in the form of a disc curve.
--(% class="box infomessage" %)
--(((
  **✎Note: **This function are only supported by HMI+, i series, ie series and ig series.
--)))
--**Source**
++**(1) Source**
++
  (% style="text-align:center" %)
  [[image:6-2DiscRecord.png||class="img-thumbnail"]]
--* **Source type**
--** **History**: Historical data can be queried.
--** **Real Time**: Only real-time data is displayed.
--* **Curve Buffer**
--** **History**: It is in data record area configured by data record. Multiple record groups could be configured, and each record group has multiple channels.
--** **Real Time**: It is in Real-time trend chart configured by data record. Multiple record groups could be configured, and each record group has multiple curve numbers.
++1. **Source type**
--(% class="box infomessage" %)
--(((
--**✎Note: **There must be one of settings (Data record and real-time trend chart) in configurations, otherwise there will be no data in curve buffer.
--)))
++* **History**: Historical data can be queried.
++* **Real Time**: Only real-time data is displayed.
--* **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed. After selecting the curve to be displayed, it can set the scale range and scale color of each curve.
--* **Enable**: After selecting the corresponding curve number in the status bar and enabling the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
--* **Data Range: **Directly set the maximum and minimum values of the displayed graph. If the box "Variable Range" is checked, the set data is read from the filled address. The data format of the address is set as needed, and the length of the variable address is related to the set data format.
--* **Display Scale Value: **Display the value of disc record. The font color could be changed.
++(% start="2" %)
++1. **Curve Buffer**
--**Appearance**
++* **History**: Ii is in data record area configured by data record. Multiple record groups could be configured, and each record group has multiple channels.
++* **Real Time**: It is in Real-time trend chart configured by data record. Multiple record groups could be configured, and each record group has multiple curve numbers.
++**✎Note: **There must be one of settings (Data record and real-time trend chart) in configurations, otherwise there will no data in curve buffer.
++
++(% start="3" %)
++1. **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed.After selecting the curve to be displayed, it can set the scale range and scale color of each curve.
++1. **Enable**: After selecting the corresponding curve number in the status bar and enable the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.
++1. **Data Range: **Directly set the maximum and minimum values of the displayed graph. If the box "Variable Range" is checked, the set data is read from the filled address. The data format of the address is set as needed, and the length of the variable address is related to the set data format.
++1. **Display Scale Value: **Display the value of disc record. The font color could be changed
++
++**(2) Appearance**
++
  (% style="text-align:center" %)
  [[image:6-3DiscRecordConfigAppearen.png||class="img-thumbnail"]]
--1. **Circular Axis Scale**: Number of scale intervals in the direction of the circular axis. The range is 1 to 10.
--1. **Start Position**: The starting position to draw the curve: top, bottom, left, and right.
--1. **Rotary Axis Scale**: Number of scale intervals in the direction of the axis of rotation. The range is 4, 6, and 12.
++1. **Circular Axis Scale**: Number of scale intervals in the direction of the circular axis. The range is1 to10.
++1. **Start Position**: The starting position to draw the curve: top, bottom, left and right.
++1. **Rotary Axis Scale**: Number of scale intervals in the direction of the axis of rotation. The range is 4, 6 and 12.
 . **Inner Circle Size**: Ratio of the inner circle to the outer circle.
 . **Scale Style**: The way the scale is displayed, style 0 represents adaptive display, and style 1 represents forward display.
 . **Background Color**: Appearance background color.
@@ -1401,7 +1401,7 @@
 . **Enable Font**: Use the set font library and font size for display. When this font is not enabled, the default built-in font is used for display.
 . **Enable Point**: Set to enable point, the data unit of each curve will be highlighted as a point.
--**Function**
++**(3) Function**
  (% style="text-align:center" %)
  [[image:6-4DiscRecordConfigFuncAddr.png||class="img-thumbnail"]]
@@ -1409,10 +1409,7 @@
  **Function start Address**: Open the sub-screen of the data record query, and the system can automatically allocate the object address of the query screen according to the configured address. When using this component, it will automatically generate buttons for four direction, you can use these four control keys to view the data record display, and automatically create a new sub-screen based on the function start address, the content of the sub-screen is the query setting for span and start time.
  When two objects use one function screen at the same time, if the function addresses of the two object are the same, changing the built-in screen will affect the operation of the two display object at the same time. If the function addresses of the two objects are different, the second object with the built-in screen can be displayed normally, and the first object will be displayed abnormally.
--(% class="box infomessage" %)
--(((
  **✎Note: ** When copying Data record display, it is recommended to create a new "function screen" to avoid repeated calls that may cause abnormal functions.
--)))
  **Start time**: Set the start time and conditions for data viewing.
@@ -1428,7 +1428,7 @@
  == **Pointer meter** ==
--The meter responds to change in the value of the indicated word address by means of a dial and a pointer. The meter looks very similar to the actual meter.
++The meter responds to changes in the value of the indicated word address by means of a dial and a pointer. The meter looks very similar to the actual meter.
  (% style="text-align:center" %)
  [[image:image-20220805161001-1.jpeg]]
@@ -1443,29 +1443,36 @@
  * 32-bit signed decimal
  * 32-bit unsigned decimal
--**Digits setting:** Set directly the maximum and the minimum. Only when the floating point number is selected, can the maximum and minimum value be with a decimal point, and other data formats can't be with a decimal point. If the value is read by the address, then select "variable limits", and fill in the address.
++**Digits setting:** set directly the maximum and the minimum. Only when the floating point number is selected, can the the maximum and minimum value be with a decimal point, and other data format can't be with a decimal point. If the value is read by the address, then select "variable limits", and fill in the address.
  * **Min angle and max angle:** Data range, if data beyond range will be not inputted.
--**Variable limits:** When checked, low limit address and high limit address could be edit showed below;
++**Variable limits:** when checked, low limit address and high limit address could be edit showed below;
--**Show meter background**: This is for setting meter background. When not checked, the background color is transparent; When checked, there are four styles of pointer meter to select according to needs.
++**Show meter background**
--**Show pointer**: When not checked, the pointer is not displayed; When checked, you could set the style and color of pointer.
++This is for setting meter background, there are four types, you could select it according to needs.
--**Show alarm area**: It provides alarm function in meter, you could set the 4 areas, and each area corresponds to a different alarm color.
++**Show pointer**
--**Show scale**: Display the scale on the object to observe the value. You need to set major scale, minor scale and scale value.
++You could select show pointer or not according to need, and it provides two types for pointer and users could select pointer color.
--**Meter Type:** It sets the angle between the maximum and minimum value. It provides 7 kinds of styles, they are 180°, 210°, 240°, 270°, 300°, 330° and 360°.
++**Show alarm area**
--**Start angle: **It sets the position where the minimum value is displayed.
++It provides alarm function in meter, users could set alarm range, users could set the 4 ranges. And each range corresponds to a different alarm color.
--**Position&size:** Set the position of the object on the screen and the size of the object. The object is displayed as square. If the width or the height of the object is changed, the other data will also be changed.
++**Show scale**
++It provides settings for scale on meter, users could select [Major scale] and [Minor scale], and set color for them.
++
++**Meter angel settings**
++
++* **Meter Type:** It sets the angel between the maximum and minimum value. It provides 7 kinds of styles, they are 180°, 210°, 240°, 270°, 300°, 330° and 360°.
++* **Start angle: **It sets the position where the minimum value is displayed.
++
  **Result**
--When configuration is completed, the object is shown below picture when HMI is running.
++When configuration is completed, the object is shown as below picture when HMI is running.
  (% style="text-align:center" %)
  [[image:6.Objects_html_1b8e24a5065cf96a.gif||class="img-thumbnail"]]
@@ -1597,10 +1597,7 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_9612d7685f349400.gif||class="img-thumbnail"]]
--(% class="box infomessage" %)
--(((
  ✎**Note:** For the "Text" setting, please refer to "[[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]" in "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--)))
  = **Display** =
@@ -1651,10 +1651,13 @@
  == **QR Code** ==
++**Introduction**
++
  It is similar to the universal QR code. You could scan this object to get the connection or content, but it provides content settings for QR code.
  **Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_4cf155075ac97d16.gif||class="img-thumbnail"]]
@@ -1663,14 +1663,11 @@
 . **Variable QR:** It is for setting read address, the content of QR code is from this setting address.
 . **QR String: **It is for set static content for QR code.
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * HMI machine ID address: HSW10494 ~~ HSW10558.
--* So if user want to use QR code to display machine ID on project screen, please check "Variable QR", and set address is HSW10494.
++* So if user want to use QR code to display machine ID in project screen, please check "Variable QR", and set address is HSW10494.
  * When scanning the QR code by APP to monitor HMI, the default access password is 888888.
--)))
  == **Picture** ==
@@ -1695,17 +1695,14 @@
  This is advanced function of picture object; user can change display picture when HMI is running. The supported formats are bmp, jpg, png, jpeg. This feature is unavailable for offline and online simulation.
--1. **Root: **Set the save location of the picture, which can be set to U disk,SD card,but could not be set to Flash.
--1. **Folder: **Set the name of the folder where the picture is located.The folder name can be up to 31 characters. （Note：The picture must be stored in the U disk folder and cannot be stored in the root directory of the U disk.）
--1. **File address: **16 consecutive addresses enter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.
++1. **Root: **Set the save location of the picture,which can be set to U disk,SD card,but could not be set to Flash.
++1. **Folder: **Set the name of the folder where the picture is located.The folder name can be up to 31 characters.
++1. **File address: **16 consecutive addressesenter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.
--(% class="box infomessage" %)
--(((
  ✎**Note:**
 . The image could be displayed in BMP, JPG, PNG, and JPEG formats. Images with a resolution of 1920 x 1080 or higher are not supported.
 . For the setting of [[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
  == **Rotation picture** ==
@@ -1733,7 +1733,7 @@
  * **Min. angle:** It sets the starting angle of rotation (Valid in auto-rotation mode).
  * **Max. angle:** It sets the ending angle of rotation (Valid in auto-rotation mode).
--**Rotation angle: **The rotating angle is determined by designated address;
++**Rotation angle: **the rotating angle is determined by designated address;
  **Rotation center**: It shows the rotation center coordinates;
@@ -1747,7 +1747,7 @@
  **Enable auto-spin: **When the address is set to ON, the picture will rotate automatically.
--**Hide:** Control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.
++**Hide:** control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.
  == **Drop-down List** ==
@@ -1763,18 +1763,18 @@
  **1) Edit**
 . **Read Address:** The data from designated address will be displayed.
--1. **Same read-write address:** Configure "Write Address" as the same as "Read Address".
--1. **Write Address: **Write data to designated address. The address can be different from "Read Address".
++1. **Same read-write address:** Configure "Write Address" is the same as "Read Address".
++1. **Write Address: **Write data to designated address. The address can be different "Read Address".
  **2) Format**
--Set data format for object, it provides 16-bit unsigned decimal,16-bit BCD, 16-bit unsigned decimal, 32-bit BCD, 32-bit unsigned decimal, and 32-bit unsigned decimal.
++Set data format for object, it provides 16-bit unsigned decimal,16-bit BCD, 16-bit unsigned decimal, 32-bit BCD, 32-bit unsigned decimal and 32-bit unsigned decimal.
  **3) State count**
  It could set the total number to display in the drop-list and supports up to 128 states (1 to 128). The default value of state is corresponding to the number of states. (State 1 corresponding to value 1). You can also click "state values" to set it according to your needs.
--**State value: **User can set different values to correspond to different states, the setting window as below figure shows.
++**State value: **You can set different values to correspond to different states, the setting window as below figure shows.
  (% style="text-align:center" %)
  [[image:6.Objects_html_da9a6696f320b427.gif||class="img-thumbnail"]]
@@ -1818,28 +1818,23 @@
  **3) Read state text from address**
--1. **Text start address: **The first address of occupied multiple consecutive addresses. Address length: [Text length/2] *[state number +1].
++1. **Text start address: **the first address of occupied multiple consecutive addresses. Address length: [Text length/2] *[state number +1].
  * For example: 10 states, the address length= (10/2) *(10+1) =55. It set HDW100 as start address, so the HDW100-HDW104 stores the currently selected text content, the HDW105-HDW109 displays the text in the first state, the HDW110-HDW114 displays the second, and so on.
  (% start="2" %)
--1. **Refresh: **The drop-down list status value is updated according to the text address content. The drop-down list is not updated immediately, when the data in the text address change is completed, only the refresh is triggered, it will update.
++1. **Refresh:**The drop-down list status value is updated according to the text address content.The drop-down list is not updated immediately, when the data in the text address change is completed, only the refresh is triggered, it will update.
  == **Camera display** ==
  Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Camera__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCameradisplay]](%%)].
--(% class="box infomessage" %)
--(((
  **✎Note:**
  This function requires special HMI model, the detailed information, please contact sales.
--)))
  === **IP Camera** ===
--**(1) General**
--
  (% style="text-align:center" %)
  [[image:6.Objects_html_2bc22bd50bf65eb.gif||class="img-thumbnail"]]
@@ -1861,526 +1861,8 @@
  This is another way to control camera, check it and set the function address.
--**Camera Display usage method**
--
--（1）Usage 1: Suitable for users know camera account, password and device serial number.
--
--Add the camera display object, select Net Camera, and enable rtsp camera and configured with a functional address, the followings use HDW0 as as example:
--
--(% style="text-align:center" %)
--[[image:企业微信截图_16730778441159.png]]
--
--|=(% scope="row" %)(((
--**Register**
--)))|=(% colspan="2" style="width: 662px;" %)(((
--Function
--)))|=(% style="width: 168px;" %)(((
--**Length**
--)))
--|=(((
--HDW0
--)))|(% colspan="2" style="width:662px" %)(((
--User name
--)))|(% style="width:168px" %)(((
--20 words
--)))
--|=(((
--HDW20
--)))|(% colspan="2" style="width:662px" %)(((
--Password
--)))|(% style="width:168px" %)20 words
--|=(((
--HDW40
--)))|(% colspan="2" style="width:662px" %)(((
--Alias
--)))|(% style="width:168px" %)20 words
--|=(((
--HDW60
--)))|(% colspan="2" style="width:662px" %)(((
--Device Serial Number
--)))|(% style="width:168px" %)43 words
--|=(((
--HDW103
--)))|(% colspan="2" style="width:662px" %)(((
--Camera ID
--)))|(% style="width:168px" %)(((
--1 word
--)))
--|=(% rowspan="11" %)(((
--HDW104
--)))|(% colspan="2" style="width:662px" %)(((
--Camera control
--)))|(% rowspan="11" style="width:168px" %)(((
--1 word
--)))
--|(((
--HDX104.0
--)))|(% style="width:448px" %)(((
--Open Camera
--)))
--|HDX104.1|(% style="width:448px" %)(((
--Close Camera
--)))
--|HDX104.2|(% style="width:448px" %)(((
--Camera up
--)))
--|HDX104.3|(% style="width:448px" %)(((
--Camera down
--)))
--|HDX104.4|(% style="width:448px" %)(((
--Camera left
--)))
--|HDX104.5|(% style="width:448px" %)(((
--Camera right
--)))
--|HDX104.6|(% style="width:448px" %)(((
--Screenshots
--)))
--|HDX104.7|(% style="width:448px" %)(((
--Binding camera
--)))
--|HDX104.8|(% style="width:448px" %)(((
--Set alias
--)))
--|HDX104.9|(% style="width:448px" %)(((
--Camera stops moving
--)))
--|=(((
--HDW105
--)))|(% colspan="2" style="width:662px" %)(((
--Camera Status
--
--~=0：Camera disconnected；
--
--~=1：Camera connected properly；
--
--~=2：Camera is being connected.
--)))|(% style="width:168px" %)(((
--1 word
--)))
--|=(((
--HDW106
--)))|(% colspan="2" style="width:662px" %)(((
--Screenshot save location：
--
--~=0：Screenshot save in Flash/IPCameraScreenShot；
--
--~=1：Screenshot save in U Disk/IPCameraScreenShot；
--
--~=2：Screenshot save in SDCard/IPCameraScreenShot.
--)))|(% style="width:168px" %)(((
--1 word
--)))
--
--* (((
--Fill in the camera ID with the camera serial number queried by "Camera Search Module", trigger the binding address, and fill in the camera information (user name, password, device serial number, etc.) of the ID into the corresponding function address.
--)))
--* (((
--If the "Camera Search Module" is not enabled, you need to enter the camera information manually: user name, password, device serial number (S/N), which can be obtained from the label on the camera body.
--)))
--
--(% style="text-align:center" %)
--[[image:图片1.png]]
--
--
--* (((
--Trigger the "Open Camera" address to view the surveillance screen of the camera.
--)))
--
--If the camera is successfully opened, you can set the alias of the camera, control the up/down/left/right movement of the camera (provided that the camera supports up/down/left/right control), and take screenshots.
--
--If the camera is off, you can't set alias, camera rotation, screenshot, etc.
--
--(2) Usage 2: Suitable for users know the camera account, password and camera IP
--
--After enabling the rtsp camera and configuring the function address, additionally check Default configuration option, the configuration method and the function can address as follows.
--
--(% style="text-align:center" %)
--[[image:JqIamFyDzE.png]]
--
--(% style="text-align:center" %)
--[[image:企业微信截图_16730803592289.png]]
--
--|=(% scope="row" %)(((
--**Register**
--)))|=(% colspan="2" style="width: 662px;" %)(((
--Function
--)))|=(% style="width: 168px;" %)(((
--**Length**
--)))
--|=(((
--HDW0
--)))|(% colspan="2" style="width:662px" %)(((
--User name
--)))|(% style="width:168px" %)(((
--20 words
--)))
--|=(((
--HDW20
--)))|(% colspan="2" style="width:662px" %)(((
--Password
--)))|(% style="width:168px" %)20 words
--|=(((
--HDW40
--)))|(% colspan="2" style="width:662px" %)(((
--IP
--)))|(% style="width:168px" %)(((
--8 words
--)))
--|=(((
--HDW48
--)))|(% colspan="2" style="width:662px" %)(((
--Port
--)))|(% style="width:168px" %)(((
--1 word
--)))
--|=(% rowspan="10" %)(((
--HDW49
--)))|(((
--HDX49.0
--)))|(% style="width:448px" %)(((
--Open Camera
--)))|(% rowspan="10" style="width:168px" %)(((
--1 word
--)))
--|(((
--HDX49.1
--)))|(% style="width:448px" %)(((
--Close Camera
--)))
--|(((
--HDX49.2
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.3
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.4
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.5
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.6
--)))|(% style="width:448px" %)(((
--Screenshots
--)))
--|(((
--HDX49.7
--)))|(% style="width:448px" %)
--|(((
--HDX49.8
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.9
--)))|(% style="width:448px" %)(((
--
--)))
--|=(((
--HDW50
--)))|(% colspan="2" style="width:662px" %)(((
--Camera Status
--
--~=0：Camera disconnected；
--
--~=1：Camera connected properly；
--
--~=2：Camera is being connected.
--)))|(% style="width:168px" %)(((
--1 word
--)))
--|=(((
--HDW51
--)))|(% colspan="2" style="width:662px" %)(((
--Screenshot save location：
--
--~=0：Screenshot save in Flash/IPCameraScreenShot；
--
--~=1：Screenshot save in U Disk/IPCameraScreenShot；
--
--~=2：Screenshot save in SDCard/IPCameraScreenShot.
--)))|(% style="width:168px" %)(((
--1 word
--)))
--
--* (((
--If you have set the default settings, directly trigger the function address to trigger the opening of the camera.
--)))
--* (((
--The camera configured via ip only supports, turn on, turn off, screenshot basic functions.
--)))
--
--（3）Usage 3: Suitable for users know the address of rtsp stream play.
--
--After enabling the rtsp camera and configuring the function address, additional check URL configuration option, configuration method and function can address as follows.
--
--(% style="text-align:center" %)
--[[image:qi1abBsfln.png]]
--
--(% style="text-align:center" %)
--[[image:EwAePzRgIB.png]]
--
--|=(% scope="row" %)(((
--**Register**
--)))|=(% colspan="2" style="width: 662px;" %)(((
--Function
--)))|=(% style="width: 168px;" %)(((
--**Length**
--)))
--|=(((
--HDW0
--)))|(% colspan="2" style="width:662px" %)(((
--User name
--)))|(% style="width:168px" %)(((
--20 words
--)))
--|=(((
--HDW20
--)))|(% colspan="2" style="width:662px" %)(((
--Password
--)))|(% style="width:168px" %)20 words
--|=(((
--HDW40
--)))|(% colspan="2" style="width:662px" %)(((
--IP
--)))|(% style="width:168px" %)(((
--8 words
--)))
--|=(((
--HDW48
--)))|(% colspan="2" style="width:662px" %)(((
--Port
--)))|(% style="width:168px" %)(((
--1 word
--)))
--|=(% rowspan="10" %)(((
--HDW49
--)))|(((
--HDX49.0
--)))|(% style="width:448px" %)(((
--Open Camera
--)))|(% rowspan="10" style="width:168px" %)(((
--1 word
--)))
--|(((
--HDX49.1
--)))|(% style="width:448px" %)(((
--Close Camera
--)))
--|(((
--HDX49.2
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.3
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.4
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.5
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.6
--)))|(% style="width:448px" %)(((
--Screenshots
--)))
--|(((
--HDX49.7
--)))|(% style="width:448px" %)
--|(((
--HDX49.8
--)))|(% style="width:448px" %)(((
--
--)))
--|(((
--HDX49.9
--)))|(% style="width:448px" %)(((
--
--)))
--|=(((
--HDW50
--)))|(% colspan="2" style="width:662px" %)(((
--Camera Status
--
--~=0：Camera disconnected；
--
--~=1：Camera connected properly；
--
--~=2：Camera is being connected.
--)))|(% style="width:168px" %)(((
--1 word
--)))
--|=(((
--HDW51
--)))|(% colspan="2" style="width:662px" %)(((
--Screenshot save location：
--
--~=0：Screenshot save in Flash/IPCameraScreenShot；
--
--~=1：Screenshot save in U Disk/IPCameraScreenShot；
--
--~=2：Screenshot save in SDCard/IPCameraScreenShot.
--)))|(% style="width:168px" %)(((
--1 word
--)))
--
--* (((
--If you have set the default settings, directly trigger the function address to trigger the opening of the camera.
--)))
--* (((
--The camera configured via ip only supports, turn on, turn off, screenshot basic functions.
--)))
--
--**EZVIZ Cloud Description**
--
--(% style="text-align:center" %)
--[[image:企业微信截图_1673081149790.png]]
--
--(% style="text-align:center" %)
--[[image:企业微信截图_1673081156755.png]]
--
--(% class="wikigeneratedid" %)
--The function address will occupy the 125 word address, the following table is using the HDW6000 as a example:
--
--(% style="width:892px" %)
--|=(% scope="row" style="width: 208px;" %)Register|=(% style="width: 308px;" %)Description|=(% style="width: 132px;" %)Length|=(% style="width: 241px;" %)Data Format
--|=(% style="width: 208px;" %)HDW6000|(% style="width:308px" %)AppKey of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String
--|=(% style="width: 208px;" %)HDW6020|(% style="width:308px" %)AppSecret of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String
--|=(% style="width: 208px;" %)HDW6040|(% style="width:308px" %)Device S/N of EZVIZ Cloud|(% style="width:132px" %)43 Words|(% style="width:241px" %)String
--|=(% style="width: 208px;" %)HDW6083|(% style="width:308px" %)Channel number of EZVIZ Cloud|(% style="width:132px" %)1 Word|(% style="width:241px" %)16bit Unsigned
--|=(% style="width: 208px;" %)HDW6084|(% style="width:308px" %)Device IP of EZVIZ Cloud|(% style="width:132px" %)16 Words|(% style="width:241px" %)String
--|=(% style="width: 208px;" %)HDW6100|(% style="width:308px" %)RTSP Port of EZVIZ Cloud|(% style="width:132px" %)1 Word|(% style="width:241px" %)16bit Unsigned
--|=(% style="width: 208px;" %)HDW6101|(% style="width:308px" %)Verification code of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String
--|=(% style="width: 208px;" %)HDX6121.1|(% style="width:308px" %)(((
--Confirmation of binding EZVIZ camera
--
--(=1, Confirm; =Others value, Unconfirm)
--)))|(% style="width:132px" %)1 Bit|(% style="width:241px" %)Bit
--|=(% style="width: 208px;" %)HDW6122|(% style="width:308px" %)Device function control |(% style="width:132px" %)1 Word|(% style="width:241px" %)16bit Unsigned
--|=(% style="width: 208px;" %)HDW6123|(% style="width:308px" %)(((
--Device status
--
--(=0, Close; =1, Open)
--)))|(% style="width:132px" %)1 Word|(% style="width:241px" %)16bit Unsigned
--|=(% style="width: 208px;" %)HDW6124|(% style="width:308px" %)Result code of function control(HDW6122)|(% style="width:132px" %)2 Words|(% style="width:241px" %)32bit Signed
--
--When the function control HDW6122 set to different value, it will trigger different function. After triggered, the HDW6122 will be reset to 0. The specific introduction like follows:
--
--|=(% scope="row" style="width: 450px;" %)Register Value|=(% style="width: 564px;" %)Function Description
--|=(% style="width: 450px;" %)1|(% style="width:564px" %)Open camera
--|=(% style="width: 450px;" %)2|(% style="width:564px" %)Close camera
--|=(% style="width: 450px;" %)3|(% style="width:564px" %)Move up
--|=(% style="width: 450px;" %)4|(% style="width:564px" %)Move down
--|=(% style="width: 450px;" %)5|(% style="width:564px" %)Move left
--|=(% style="width: 450px;" %)6|(% style="width:564px" %)Move right
--|=(% style="width: 450px;" %)7|(% style="width:564px" %)Move upper left
--|=(% style="width: 450px;" %)8|(% style="width:564px" %)Move lower left
--|=(% style="width: 450px;" %)9|(% style="width:564px" %)Move upper right
--|=(% style="width: 450px;" %)10|(% style="width:564px" %)Move lower right
--|=(% style="width: 450px;" %)11|(% style="width:564px" %)Zoom in
--|=(% style="width: 450px;" %)12|(% style="width:564px" %)Zoom out
--|=(% style="width: 450px;" %)13|(% style="width:564px" %)Short focal length
--|=(% style="width: 450px;" %)14|(% style="width:564px" %)Long focal length
--|=(% style="width: 450px;" %)15|(% style="width:564px" %)HD clarity
--|=(% style="width: 450px;" %)16|(% style="width:564px" %)Smooth clarity
--|=(% style="width: 450px;" %)17|(% style="width:564px" %)Stop control
--
--The result code of function control will be displayed in HDW6124, the specific code as following table shows:
--
--(% style="width:1029px" %)
--|=(% scope="row" style="width: 129px;" %)Result Code|=(% style="width: 366px;" %)Description|=(% style="width: 531px;" %)Remark
--|=(% style="width: 129px;" %)-1|(% style="width:366px" %)Operation failed|(% style="width:531px" %)Other reason(For example network error, device configuration error, etc.)
--|=(% style="width: 129px;" %)-1001|(% style="width:366px" %)Internal error|(% style="width:531px" %)Suggest to retry
--|=(% style="width: 129px;" %)-1002|(% style="width:366px" %)Camera search: Request parameter is empty|(% style="width:531px" %)Confirm the account and password whether correct or not
--|=(% style="width: 129px;" %)-1003|(% style="width:366px" %)Camera search: Search failed|(% style="width:531px" %)Confirm the device ethernet whether connect normal
--|=(% style="width: 129px;" %)-1004|(% style="width:366px" %)Camera binding failed: Invalid camera ID|(% style="width:531px" %)Confirm the camera ID whether is in the valid range
--|=(% style="width: 129px;" %)-1005|(% style="width:366px" %)Camera opening failed: Cannot match the corresponding camera|(% style="width:531px" %)Confirm the account, password and S/N whether correct or not
--|=(% style="width: 129px;" %)-1006|(% style="width:366px" %)Camera opening failed: Cannot adapt minimum resolution|(% style="width:531px" %)Confirm the camera supports ONVIF protocol or not
--|=(% style="width: 129px;" %)-1007|(% style="width:366px" %)Camera opening failed: Cannot get the rtsp stream address|(% style="width:531px" %)Confirm the camera supports ONVIF protocol or not
--|=(% style="width: 129px;" %)-1008|(% style="width:366px" %)Camera opening failed: Cannot adapt the camera parameters|(% style="width:531px" %)Confirm the camera supports ONVIF protocol or not
--|=(% style="width: 129px;" %)-1009|(% style="width:366px" %)Camera opening failed: Open video stream failed|(% style="width:531px" %)Confirm the camera whether is on running status, or whether open the camera too frequently
--|=(% style="width: 129px;" %)-1010|(% style="width:366px" %)Camera closing failed: Camera on the closed status|(% style="width:531px" %)Confirm the camera whether is on running status or not
--|=(% style="width: 129px;" %)-1011|(% style="width:366px" %)Camera closing failed: Camera on the closed status|(% style="width:531px" %)Confirm the camera whether is on running status or not
--|=(% style="width: 129px;" %)-1012|(% style="width:366px" %)Screenshot failed: Camera not opened|(% style="width:531px" %)Confirm the camera whether is on running status or not
--|=(% style="width: 129px;" %)-1013|(% style="width:366px" %)Screenshot failed: Execution error occurred|(% style="width:531px" %)Confirm the camera whether is on normal running status or not
--|=(% style="width: 129px;" %)-1014|(% style="width:366px" %)Alias setting failed: Cannot match the corresponding camera|(% style="width:531px" %)Confirm the S/N whether correct or camera whether is on running status
--|=(% style="width: 129px;" %)-1015|(% style="width:366px" %)Pan-tilt controlling failed: Camera on the closed status|(% style="width:531px" %)Confirm the camera whether is on normal running status or not
--|=(% style="width: 129px;" %)-1016|(% style="width:366px" %)Pan-tilt controlling failed: Camera match failed|(% style="width:531px" %)Confirm the account, password and S/N whether correct and the camera device whether supports pan-tilt movement
--|=(% style="width: 129px;" %)1|(% style="width:366px" %)Operation success|(% style="width:531px" %)Operation success
--|=(% style="width: 129px;" %)201|(% style="width:366px" %)Play address created|(% style="width:531px" %)Do not open the camera frequently
--|=(% style="width: 129px;" %)401|(% style="width:366px" %)Unauthorized|(% style="width:531px" %)Please contact the device administrator to enable operation permission
--|=(% style="width: 129px;" %)403|(% style="width:366px" %)Operation prohibited|(% style="width:531px" %)Please contact the device administrator to enable operation permission
--|=(% style="width: 129px;" %)404|(% style="width:366px" %)Play address not obtain|(% style="width:531px" %)Confirm the device network status
--|=(% style="width: 129px;" %)403|(% style="width:366px" %)User does not exist|(% style="width:531px" %)Confirm the AppKey and AppSecret whether correct
--|=(% style="width: 129px;" %)10001|(% style="width:366px" %)Parameter error|(% style="width:531px" %)Confirm the basic information of EZVIZ Cloud whether correct
--|=(% style="width: 129px;" %)10002|(% style="width:366px" %)AccessToken abnormal or expire|(% style="width:531px" %)Please try to reopen the camera
--|=(% style="width: 129px;" %)10005|(% style="width:366px" %)AppKey abnormal|(% style="width:531px" %)AppKey is frozen, please contact with EZVIZ customer service to unfreeze
--|=(% style="width: 129px;" %)10017|(% style="width:366px" %)AppKey does not exist|(% style="width:531px" %)Confirm the AppKey whether correct or not
--|=(% style="width: 129px;" %)10030|(% style="width:366px" %)AppKey is unmatched with AppSecret|(% style="width:531px" %)Confirm the AppKey and AppSecret whether correct
--|=(% style="width: 129px;" %)20001|(% style="width:366px" %)Channel does not exist|(% style="width:531px" %)Confirm the camera whether re-added or channel parameter whether changed
--|=(% style="width: 129px;" %)20002|(% style="width:366px" %)Device does not exist|(% style="width:531px" %)Confirm the S/N whether correct
--|=(% style="width: 129px;" %)20006|(% style="width:366px" %)Network abnormal|(% style="width:531px" %)Confirm the device network status, try again later
--|=(% style="width: 129px;" %)20007|(% style="width:366px" %)Device offline|(% style="width:531px" %)Confirm the devie whether online or not
--|=(% style="width: 129px;" %)20008|(% style="width:366px" %)Device response timeout|(% style="width:531px" %)Operation too frequent, try again later
--|=(% style="width: 129px;" %)20014|(% style="width:366px" %)S/N illegal|(% style="width:531px" %)Confirm the S/N whether correct
--|=(% style="width: 129px;" %)20018|(% style="width:366px" %)The current user does not own the device|(% style="width:531px" %)Confirm the S/N whether correct
--|=(% style="width: 129px;" %)20032|(% style="width:366px" %)Channel does not exist under the current user|(% style="width:531px" %)Confirm the camera whether re-added or channel parameter whether changed
--|=(% style="width: 129px;" %)49999|(% style="width:366px" %)Data abnormal|(% style="width:531px" %)Please try to reopen the camera
--|=(% style="width: 129px;" %)60000|(% style="width:366px" %)Device does not support pan-tilt controlling|(% style="width:531px" %)Confirm the device whether supports pan-tilt controlling or not
--|=(% style="width: 129px;" %)60001|(% style="width:366px" %)The current user does not have the permission of pan-tilt controlling|(% style="width:531px" %)Please contact the device administrator to enable operation permission
--|=(% style="width: 129px;" %)60002|(% style="width:366px" %)Device tilt reaches to the upper movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation
--|=(% style="width: 129px;" %)60003|(% style="width:366px" %)Device tilt reaches to the lower movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation
--|=(% style="width: 129px;" %)60004|(% style="width:366px" %)Device pan reaches to the left movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation
--|=(% style="width: 129px;" %)60005|(% style="width:366px" %)Device pan reaches to the right movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation
--|=(% style="width: 129px;" %)60006|(% style="width:366px" %)Current pan-tilt controlling operation failed|(% style="width:531px" %)Pan-tilt operation failed, try again later
--|=(% style="width: 129px;" %)60019|(% style="width:366px" %)Device stream is encrypted|(% style="width:531px" %)Using the EZVIZ Cloud client software to close the stream encrypted, then remote monitoring will be able to use
--|=(% style="width: 129px;" %)60020|(% style="width:366px" %)Unsupport this command|(% style="width:531px" %)Confirm the device whether supports this operation or not
--
--(% class="wikigeneratedid" %)
--**Default Configuration**： Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.
--
--**In the default configuration, the following are required：**
--
--**AppKey**： EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.
--**Secret**： EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.
--**Channel number**： EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.
--
--**S/N： **EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.
--
--
--**In the default configuration, the following are optional:**
--
--**IP**： EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.
--
--**RTSP Port**： EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.
--**Verification Code**： EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.
--
--{{info}}
--**✎Note: **The required content in the configuration only supports remote monitoring when the camera screen can be displayed, if there is a demand for the screen side can also display the camera screen, user need to fill in the optional content in the configuration.
--{{/info}}
--
  === **USB Camera** ===
--**(1) General**
--
  (% style="text-align:center" %)
  [[image:6.Objects_html_6d926ea40f8267c.gif||class="img-thumbnail"]]
@@ -2397,7 +2397,7 @@
  |(% style="width:144px" %)1|(% style="width:700px" %)Enable the screenshot function
  |(% style="width:144px" %)2|(% style="width:700px" %)refresh camera display object
--**Camera state: **It shows the current camera states. It occupies a word address. Different value means different operations, as below table shows:
++**Camera state: **It shows the current camera states. Itoccupies a word address. Different value means different operations, as below table shows:
  (% class="table-bordered" %)
  |=**Value**|=**Operation**
@@ -2418,11 +2418,11 @@
  The current screenshots are only allowed on the SD card. When the SD card does not exist the system will cache the latest 10 screenshots.
--**Picture name: **The name of the image is controlled by the address. The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
++**Picture name: **The name of the image is controlled by the address.The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].
  **4) Global screenshot**
--If this function is enabled, camera display object can perform the screenshot operation when HMI is running and save it as a . BMP image.
++If this function is enable, camera display object can perform the screenshot operation when HMI is running and save it as a .BMP image.
  If this function is disabled, camera display object only performs the screenshot operation when it is displayed on screen.
@@ -2432,30 +2432,27 @@
  **6) Use resolution size**
--Coordinate displays the object location on the screen, and size is the length and width of the object.
++Coordinate displays the object location in the screen, and size is the length and width of the object.
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.
--* When HMI is displayed horizontally, the USB camera screen displays normally. If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
++* When HMI is displayed horizontally, the USB camera screen displays normally.If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)
  * One HMI is only allowed to connect with one USB camera device. There is only one USB camera display part in the whole project screen, and the camera display part is not allowed to be placed on the public screen (1002: common Windows).
  * Sometimes the USB camera may lose the image because of the influence in the field, then we suggest to PI9000 HMI and the recommended USB camera model.
--* All below USB camera model have been tested by WECON to ensure compatibility.
++* All below USB camera model have been tested by WECON to ensure the compatibility.
  * Currently, only PI8000 and PI9000 series support the USB camera function. Recommended USB cameras include:
  ** REB-USB 100W07M (supports 720p)
  ** WX152HD (supports 720p)
  ** RMONCAM G200 (supports 720p)
--** ASHU S300 (640*480
--)))
++** ASHU S300 (640*480)
--*
--
  == **Camera control** ==
--This is for control camera; This object need to be used with camera display object.
++**Introduction**
++This is for control camera; this object need to be used with camera display object.
++
  **Description**
  (% style="text-align:center" %)
@@ -2465,11 +2465,11 @@
  Read a string from designated system address, and then combine the instruction to control the camera image.
--When the dynamic control command is disabled, the complete camera control command is entered in order to display the camera contents.
++When the dynamic control command is disabled, the complete camera control command be entered in order to display the camera contents.
  **2) Camera control instruction**
--This is for entering static instruction for camera so that users can operate camera when HMI running.
++This is for enter static instruction for camera, so that users can operation camera when HMI running;
  **3) Control bit**
@@ -2481,7 +2481,7 @@
  == **Flow component** ==
--The flow components are mainly used to reflect the flow state in process flow production. User could set the style of flow components according to requirements.
++The flow components are mainly used to reflect the flow state in process flow production. You could set the style of flow components according to requirements.
  **Description**
@@ -2501,9 +2501,9 @@
 . **Block width:** It sets block width of flow component.
 . **PipeFrn width: **It sets outer border width of flow component.
 . **Block length: **It sets block length of flow component.
--1. **Transparence:** It sets transparence of flow component. (from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
--1. **Ratio:** It sets the display ratio of block and background (Display density of the block in flow component).
--1. **Speed:** It sets flow speed of the block during HMI running.
++1. **Transparence:** It sets transparence of flow component.(from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.
++1. **Ratio:** It sets display ratio of block and background (Display density of the block in flow component).
++1. **Speed:** It setsflow speed of the block during HMI running.
  **(3) Control**
@@ -2527,9 +2527,9 @@
  == **Printer** ==
--The printing object is primarily suitable for printing out or screenshots saving when connected to micro printer.
++The printing object is primarily suitable for print out or screenshots saving when connected to micro printer.
--Printer has two types: serial printer and USB printer. Printf (printext function) should be called when it's used to print fixed message in a script.
++Printer has two types: **serial printer and USB printer**. Printf (printext function) should be called when it's used to print fixed message in a script.
  **Printer protocol**
@@ -2549,18 +2549,18 @@
  **(1) Display settings**
 . **Direction: **Four direction choices in printing: 0, 90, 180, and 270.
--1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion to paper size.
++1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion with paper size.
  **(2) Trigger mode**
--1. **Trigger address: **When trigger address turns ON. The printer starts to respond operationally.
++1. **Trigger address: **When trigger address turns ON.Printer starts to respond operation.
 . **Printer\ Save:** It sets operation for this object, printer object could support sending printing command to printer device, and including screenshot.
  **(3) Save path**
--Valid when the save mode is selected, screenshot the content in printing object area, and save it in specified storage and folder, when trigger address turns ON.
++Valid when the save mode is selected, screenshot the content in printing object area and the save it in specified storage and folder, when trigger address turns ON.
--Folder: It's available to select an SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture the first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
++Folder: It's available to select SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.
  **Related issues**
@@ -2626,10 +2626,8 @@
  English 2
  )))
--(% class="box infomessage" %)
--(((
++(% class="wikigeneratedid" %)
  ✎**Note:** For [[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--)))
  == **Time** ==
@@ -2655,14 +2655,16 @@
  == **Text** ==
--It adds text to HMI screen, and an object can be displayed in 8 languages (set in "All Languages") with a special address setting.
++It adds text to HMI screen, and a object can be displayed in 8 languages (set in "All Languages") with a special address setting.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_3cae6153cc6e4750.gif||class="img-thumbnail"]]
  **(1) Current state**
--It is used to switch the object states, but [Text] object only has one state, so this function is invalid.
++It used to switch the object states, but [Text] object only has one state, so this function is invalid.
  **(2) All language**
@@ -2681,7 +2681,7 @@
  **(5) Text color**
--It sets color of text in object.
++It sets color for text in object.
  **(6) Text background**
@@ -2689,8 +2689,10 @@
  == **Table** ==
--It is displayed in a table format on the HMI screen to meet the display needs of user.
++It is displayed in a table format in the HMI screen to meet the display needs of user.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_2aad7ef679949d71.gif||class="img-thumbnail"]]
@@ -2703,7 +2703,7 @@
 . **Border:** It sets table line color, including table line and frame line.
 . **Transparence: **It sets the transparency of the object background.
 . **Fill style: **There are two options for it, one is display background, and the other is no background.
--1. **Background:** Valid when selecting display background in "Fill style".
++1. **Background:** Valid when select display background in "Fill style".
  **(2) View**
@@ -2713,6 +2713,8 @@
  It is displayed in line format in the HMI screen to meet the display needs of user.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_795af47bf0ad8529.gif||class="img-thumbnail"]]
@@ -2730,7 +2730,7 @@
  **(3) Coordinate control**
--Dynamically set the position coordinate between two points in line. Set four addresses respectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
++Dynamically set the position coordinate between two points in line. Set four addressesrespectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.
  **(4) Color control**
@@ -2742,10 +2742,12 @@
  == **Polygon** ==
--It is displayed in polygon format on the HMI screen to meet the display needs of user.
++It is displayed in polygon format in the HMI screen to meet the display needs of user.
  Right click to close polygon and then complete the creation procedure. Select the polygon, then click its point position to change its vertex coordinate after it is created.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_9f46a2daf3b48e68.gif||class="img-thumbnail"]]
@@ -2754,7 +2754,7 @@
 . **Border color: **It sets border line color.
 . **Border type:** It sets border line type.
 . **Border width: **It sets border line width.
--1. **Transparence: **It sets the transparency of the object's background.
++1. **Transparence: **It sets the transparency of the object background.
 . **Coordinate editing:** It changes coordinate for all points in this object, as below shows.
  (% style="text-align:center" %)
@@ -2778,8 +2778,10 @@
  == **Cycle/ Ellipse** ==
--It is displayed as cycle on HMI screen to meet the display needs of user.
++It is displayed as cycle in HMI screen to meet the display needs of user.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_1851aaa90af6ee72.gif||class="img-thumbnail"]]
@@ -2789,8 +2789,8 @@
 . **Frame width: **It sets border line type.
 . **Frame type: **It sets border line width
 . **Pattern: **It sets background type, there are four types.
--1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern]
--1. **Transparence:** It sets the transparency of the object's background.
++1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern]
++1. **Transparence:** It sets the transparency of the object background.
  **2) Transparence control**
@@ -2798,7 +2798,7 @@
  **3) Cycle**
--Check if it is for circle; uncheck it for ellipse.
++Check if for circle; uncheck it for ellipse.
  **4) Color control**
@@ -2824,6 +2824,7 @@
  **2) Display settings**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_4729b28f315a5a9b.gif||class="img-thumbnail"]]
@@ -2832,7 +2832,7 @@
 . **Line width: **It sets border line type.
 . **Fill style: **It sets background type, there are four types.
 . **Transparence:** It sets the transparency of the object background.
--1. **Background: **It sets background color of object, invalid when selecting [No fill] in [Pattern].
++1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern].
  **(3) Only show arc**
@@ -2858,6 +2858,8 @@
  The line segments are linked end-to-end to form a broken line, whose vertex coordinate can be modified by drafting, just like polygon.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_c3b0de1d4c2fe745.gif||class="img-thumbnail"]]
@@ -2880,7 +2880,7 @@
  In basic display settings, the line width can't be changed, but user can change width by address.
--Read the numerical value of address to control the width of line. Display range of numerical value:1-10.
++Read the numerical value of address to control the width of line.Display range of numerical value:1-10.
  **(4) View**
@@ -2890,6 +2890,8 @@
  The linear scale is a linear scale that draws the specified area with a bisector. The specific scale of the scale can be marked with static text.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_b604bd83c8b8b6d1.gif||class="img-thumbnail"]]
@@ -2897,12 +2897,12 @@
 . **Line color:** It sets all line in object (including main and sub scale).
 . **Display direction: **It provides four modes for display.
--1. **Main scale: **It sets the cell of the main scale.
++1. **Main scale:**It sets the cell of the main scale.
 . **Sub scale:** It sets the cell of sub scale for every main scale.
  **(2) View**
--It is for preview object.
++It is for preview object;
  == **Arc scale** ==
@@ -2936,15 +2936,15 @@
  Customized object is provided for users to design the universal interface of object freely to meet customization requirements.
++**Description**
++
  (% style="text-align:center" %)
  [[image:6.Objects_html_c8146ad79a9ce732.gif||class="img-thumbnail"]]
--1. **Function Address:** The numerical value in this address is used as the function code of object to handle the corresponding operation.
--1. **DLL file name: **Select needed dll file. (i.e. dll files provided by users)
--1. **Custom address:** Users can add some function address to cooperate with dll file to complete other operations.
++1. **Function Address:** the numerical value in this address is used as the function code of object to handle the corresponding operation.
++1. **DLL file name: **Select needed dll file (i.e. dll files provided by users)
++1. **Custom address:** users can add some function address to cooperate with dll file to complete other operations
--(% class="box infomessage" %)
--(((
  **✎Note:**
  This is a custom-made object that requires the cooperation of WECON software engineers.
@@ -2951,7 +2951,6 @@
  Required documents: two XXXXXX.dll files and an document.
--* One dll file is used on PC and should be put under the dll_pc folder in the software installation directory.
++* One dll file is used in PC and should be put under the dll_pc folder in the software installation directory.
  * One dll file is used in HMI and should be put under the dll_hmi folder in the software installation directory.
  * A document for illustrating the dll files.
--)))

EwAePzRgIB.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-6.9 KB

Content

JqIamFyDzE.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-13.7 KB

Content

image-20220808142509-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-1.8 KB

Content

image-20220808142518-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-2.5 KB

Content

image-20220808142538-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-1.5 KB

Content

image-20220808142546-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-2.2 KB

Content

image-20220808142603-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-2.7 KB

Content

image-20220808142610-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-2.7 KB

Content

image-20220808142623-7.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-1.6 KB

Content

image-20220808142630-8.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Stone

Size

...	...	@@ -1,1 +1,0 @@
1		-1.8 KB

Content

qi1abBsfln.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-13.2 KB

Content

企业微信截图_16730778441159.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-30.5 KB

Content

企业微信截图_16730803286076.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-31.2 KB

Content

企业微信截图_16730803592289.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-7.8 KB

Content

企业微信截图_1673080748463.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-31.0 KB

Content

企业微信截图_16730807952477.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-10.8 KB

Content

企业微信截图_1673081149790.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-32.8 KB

Content

企业微信截图_1673081156755.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-8.3 KB

Content

图片1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Bob

Size

...	...	@@ -1,1 +1,0 @@
1		-307.4 KB

Content

XWiki.XWikiComments[0]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-1tuen8"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-v9dwdf"/}} this is test message

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:16:52.686

XWiki.XWikiComments[1]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-54p1l2"/}} hi

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:20:52.190

XWiki.XWikiComments[2]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-{{mention reference="XWiki.Roy" style="FULL_NAME" anchor="XWiki-Roy-xj75f6"/}} {{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-le3bx2"/}} 这个应该可以了吧

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:23:11.227

XWiki.XWikiComments[3]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-hello

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:28:36.248

XWiki.XWikiComments[4]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-撒反对

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:31:30.668

XWiki.XWikiComments[5]

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.test

Comment

...	...	@@ -1,1 +1,0 @@
1		-{{mention reference="XWiki.admin" style="FULL_NAME" anchor="XWiki-admin-z27h71"/}} 最新的测试

Date

...	...	@@ -1,1 +1,0 @@
1		-2023-07-27 17:38:03.653

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents