Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41

From 87.3 to 87.4 From 91.1 to 92.1

From version 87.4

edited by Hunter
on 2024/02/19 11:18

Change comment: There is no comment for this version

To version 91.1

edited by Hunter
on 2024/07/05 19:32

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -34,9 +34,9 @@
  * **Inverted Display: **Display the state picture and text of the object reversely.
  * **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
--* **Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;
--** **Blink when ON: **blink when control bit is ON.
--** **Blink when OFF: **blink when control bit is OFF.
++* **Blink: **Blinking while control bit is triggered;
++** **Blink when ON: **Blink when control bit is ON.
++** **Blink when OFF: **Blink when control bit is OFF.
  **Minimum hold time: **Only when the time of press and hold the object is greater than the set value, the object function will be executed.
@@ -153,7 +153,7 @@
  * Y-axis movement.
  * XY-axis movement.
--**For ex**a**mple**
++**For example**
  If the starting address of the movement is HDW10 and the movement type is [XY axis movement], HDW10 controls the X-axis movement, and HDW11 controls the Y-axis movement.
@@ -230,21 +230,20 @@
  **Edit**
--* **Read address: **Read value from specified address.
++* **Read address: **Read value from object display.
++* **Same read-write address**: Enable it if want to the read address and write address is exactly same.
  * **Write address: **Write value to specified address.
--Read and write address could be the same;
--
  **Data format**
--* **Format**: It is for setting operating data format; it could support seven modes.
++* **Format**: Set the data format: 16bit BCD, 16bit Unsigned, 16bit Signed, 32bit BCD, 32bit Unsigned, 32bit Signed, 32bit Float.
--**Mode**. It is for setting operating mode for value, it could support 3 modes.
++**Mode**
  * **Set value: **Set a constant value for the word address.
--* **Increase: **Increase the [operand] value for each time the switch is triggered.
--* **Decrease:** Decrease the [operand] value for each time the switch is triggered.
--* **High/Low limit:** The value will not increase/decrease when the value reaches limits.
++* **Increase: **Increase Operand value for each time the switch is triggered.
++* **Decrease:** Decrease Operand value for each time the switch is triggered.
++* **High/Low limit:** The value will be not able to change when the value reaches limits.
  (% class="box infomessage" %)
  (((
@@ -265,53 +265,45 @@
  **Address**
--* **Read address:** read the value from specified address.
++* **Read address:** Read the value from object display.
++* **States count: **Total status number for current word address, which could change the state value according to different status in button [State values], range: 1-256.
++* **State with value out of range**: When the value of the read address is not on the range of states' value, it will cause no corresponding status number is displayed. There are two modes for process when the value is out of range.
++* **Hide**: Hide the object when the value is out of range;
++* **Show state**: Specify a status when the value is out of range, for example the total states is 6(range from state No.0~~No.5), but the read value is 6, at this moment the object will show the state No.0 if selected item of show state is No.0;
--**States settings**
--
--* **States count: **The default Word state displays the number of States 1, which could be selected by the drop-down list to display the state of object, range: 1-256.
--* **State value: **Users could set different values to correspond to different states, the setting window as below figure shows.
--
  **For example**
--By default, when value of read address is 0, object displays state 0.
++The state No.0 default fill value 0, No.1 default fill value 1... and so on.
  If change settings as below figure shows
--When value of read address is 11, object displays state 1.
++When value of read address is 11, object displays state No.1.
  (% style="text-align:center" %)
  [[image:6.Objects_html_da9a6696f320b427.gif||class="img-thumbnail"]]
--**State of value out of range: **When the value of read address exceeds the maximum state number, there is no corresponding state to be displayed. So there are two modes of processing for it: "Hide" and "Show state"
--
--**Hide: **When the value of the read address exceeds the set range value, the word state display object will be blank.
--
--**Show state: **When the value of the read address exceeds the set range value, the object will display the "Specified state". For example, set the maximum is state 7 (value is 6), when the read address of the value is greater than 6, it will display state 2 text and pictures.
--
  **Transform state**
--* **Quick Read: **Directly read the value of the connected device without going through the HMI cache
++* **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
  * **Auto transforms:** Object switch states automatically
  (% style="text-align:center" %)
  [[image:6.Objects_html_b643c9a6a4bd6919.gif||class="img-thumbnail"]]
--**Trigger:**Control bit to enable switch automatically
++* **Trigger to transform: **Trigger condition of auto transform
++* **Auto return:** Return to the initial state after reaching the final state;
++* **Time of transform:** Set the interval of transform between two states;
++* **Dynamic interval: **Set the dynamic interval of transform between two states. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
--* **Auto return:** return to the initial state after reaching the final state;
--* **Time of transform:** it is used for setting the frequency in automatic switching state. Unit: 100ms.
--* **Dynamic interval: **set the frequency of automatic switching state and read it from the address. Unit: 100ms. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
--
  **Manual**
  (% style="text-align:center" %)
  [[image:6.Objects_html_a8b6636bd862369c.gif||class="img-thumbnail"]]
--* **Set state: **Set a constant value for the word address.
--* **State increase: **Increase state for each time the switch is triggered.
--* **State decrease:** Decrease state for each time the switch is triggered.
--* **Last state:** The state will not increase/decrease when reaches limits.
++* **Set state: **Set a constant value to address(according to the operate state selection) when click the object.
++* **State increase: **Increase the address value by one step when click the object, the upper limit is depends on the Last state selection.
++* **State decrease:** Decrease the address value by one step when click the object, the lower limit is depends on the Last state selection..
++* **Last state: **The upper limit or lower limit(Final state) of state increase/decrease;
  (% class="box infomessage" %)
  (((
@@ -318,9 +318,9 @@
  ✎**Note:** For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
  )))
--== Keypad switch ==
++== Button ==
--Keypad switch is designed to input data manually; this object need to work with the Keypad.User could assign letters or numbers for each switch, when the switch is triggered the data will input to the textbox.
++Button is designed to input data into the corresponding inputbox, this object need to work with the numeric input and character input.
  **Description**
@@ -338,7 +338,7 @@
  == Function switch ==
--Function switch is designed to switch screens, and call and close sub screen, and transfer data record files.
++Function switch is designed to switch screens, and call and close sub screen, and transfer record files.
  **Description**
@@ -345,8 +345,6 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_31c4ad387507a16d.gif||class="img-thumbnail"]]
--**Operation**
--
  * **Screen No: **Switch to the selected screen, it could not be subscreen;
  * **Open sub screen: **Pop-up selected sub screen, and set sub screen position, default position is (0, 0), this is the coordinates of the top left corner of the screen;
@@ -375,7 +375,7 @@
  **Using trigger address**. As the figure above, when 00 is ON, then selected operation of the function switch will be executed.
--**All terminals effect**. When this function is enabled, all terminals (screens, mobile phones, ipads, computers, etc.) will execute the function Switch Function simultaneously. For example, the screens of each terminal are different. When the screen is clicked to jump to the "Home" screen, all terminals will jump to the home screen.
++**All terminals effect**: When this function is enabled, all terminals (screens, mobile phones, ipads, computers, etc.) will execute the function Switch Function simultaneously. For example, the screens of each terminal are different. When the screen is clicked to jump to the "Home" screen, all terminals will jump to the home screen.
  (% class="box infomessage" %)
  (((
@@ -395,13 +395,11 @@
  == Combination switch ==
--The combination switch supports the collection of multiple functions onto one object. When the object is pressed, multiple functions are arranged in sequence to meet the special requirements of the user.
++The combination switch supports combine multiple functions onto one button. When the object is pressed, multiple functions are executed in sequence one by one to meet the requirements of the user.
--The combination switch contains sub-functions such as bit operation, word operation, arithmetic and screen change. Click the corresponding button on the "General" of the object to add sub-functions to the list, and up to 100 sub-functions can be added.
--
  (% class="box infomessage" %)
  (((
--✎**Note:** there can only be one screen change function in the added sub-functions, and it is at the end of the list).
++✎**Note:** There can only be one screen change function in the added sub-functions, and it is at the end of the list).
  )))
  **Description**
@@ -486,9 +486,9 @@
  * For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
  )))
--== Slider switch ==
++== Slide switch ==
--Slide switch is a special switch object. By changing the position of the slider, the corresponding address value would be changed. At the same time, the slider position will change according to the address value.
++By changing the position of the slider, the corresponding address value would be changed. At the same time, the slider position will change according to the address value.
  (% style="text-align:center" %)
  [[image:6.Objects_html_cc27b49cc3421a77.gif||class="img-thumbnail"]]
@@ -561,7 +561,7 @@
  == Numeric Input/Display ==
--"Numeric Input/Display" displays the device's data or writes data to the device in a specified numeric format, and the data could be scaled.
++"Numeric Input/Display" displays the device's data or writes data to the device in a specified numeric format.
  (% style="text-align:center" %)
  [[image:6-1NumericInput.png||class="img-thumbnail"]]
@@ -579,7 +579,7 @@
  **✎Note: **Check it to use the comment information on the keyboard. When the user clicks on the part, the comment information will be written into the HUW1402 for display. The maximum length allowed for the comment is 63 characters;
  )))
--* **Continuous Input: **Use the same keyboard to input the objects from the same Group NO according to the order of NO, and automatically close the keyboard after the last NO(object) is input;
++* **Continuous Input: **Numeric input objects with the same Group NO can be entered continuously using the same keyboard according to the NO order;
  * **NO: **the number of numeric input object;
  * **Group NO: **the group number of numeric input object;
@@ -611,7 +611,7 @@
  **Keypad position**
--It is used for setting keypad position when input data.
++The pop-up position of keypad screen.
  **Label**
@@ -627,7 +627,7 @@
  == Character Input/Display ==
--"Numeric Input/Display" displays the device's character or writes character to the device.
++"Character Input/Display" displays the device's character or writes character to the device.
  **Description**
@@ -639,15 +639,10 @@
  * **Read Address:** The data from designated address will be displayed.
  * **Input: **Enable input function and "Write Address" configuration.
  * **Same read-write address:** Configure "Write Address" is the same as "Read Address".
--* **Read DWord: **Read address is 2 words format
++* **Read DWord: **Read the address data at double byte format.
  * **Write address: **Write data to designated address. The address could be different "Read Address".
--* **Keypad:** it is standard numeric keypad, allow to input decimal and floating;
--
--(% class="box infomessage" %)
--(((
--**✎Note:** ** **Check it to use the comment information on the keyboard. When the user clicks on the part, the comment information will be written into the HUW1402 for display. The maximum length allowed for the comment is 63 characters;
--)))
--
++* **Keypad:** Built-in character keyboard input(Screen No.1001) could allow input a~~z, A~~Z, 0~~9.
++* **Note**: After the keypad is opened, the content of note will be input into special register HUW1402. The maximum length allowed for the note is 63 characters.
  * **Continuous Input: **Use the same keyboard to input the objects from the same Group NO according to the order of NO, and automatically close the keyboard after the last NO (object) is input.
  * **NO: **the number of numeric input object.
  * **Group NO: **the group number of numeric input object.
@@ -664,9 +664,9 @@
  * **Center:** data display on the center of object.
  * **Align left: **data display on the left.
  * **Align right: **data display on the right.
--* **Exchange high-low byte: **Exchange High-low byte: Check it to exchange and display the contents of the high and low bytes. If the number of contents is not a multiple of 2, the rounding process will be performed.
++* **Exchange high-low byte: **Swap the contents of high byte and low byte then display. High byte data into low byte position, low byte data into high byte position. If the length of characters is not a multiple of 2, it will exchange after rounded.
  * **Length: **The length of characters, the maximum length is 256.
--* **Exchange high-low word: **Check it to exchange and display the contents of high and low word. Only valid if the number of operating characters of the part is a multiple of 4.
++* **Exchange high-low word: **Swap the contents of high word and low word then display. Only valid when the length of characters is a multiple of 4.
  **Keypad position**
@@ -1428,7 +1428,7 @@
  == **Pointer meter** ==
--The meter responds to change in the value of the indicated word address by means of a dial and a pointer. The meter looks very similar to the actual meter.
++This object shows the numerical change of the word address by meter format.
  (% style="text-align:center" %)
  [[image:image-20220805161001-1.jpeg]]
@@ -1506,7 +1506,7 @@
  **(3) Alarm settings**
--It provides alarm function in meter, users could set alarm range, users could set the 4 ranges. And each range corresponds to a different alarm color.
++Alarm setting can be configured to display different colors, with each color corresponding to a different range. There are a maximum of four alert ranges.
  **(4) Show scale**
@@ -2258,6 +2258,15 @@
  [[image:企业微信截图_1673081156755.png]]
  (% class="wikigeneratedid" %)
++**EZVIZ Camera Parameters Comparison for HMI Series**
++
++|=(% style="width: 190px;" %)HMI Series|=(% style="width: 240px;" %)System Version|=(% style="width: 284px;" %)Number of Cameras Supported|=(% style="width: 245px;" %)Actual Screen Support Display Camera or not|=(% style="width: 240px;" %)V-NET Display|=(% style="width: 223px;" %)V-NET APP Display
++|=(% style="width: 190px;" %)8000 Series|(% style="width:240px" %)HMI V2.0|(% style="width:284px" %)1|(% style="width:245px" %)Yes|(% style="width:240px" %)Yes|(% style="width:223px" %)Yes
++|=(% style="width: 190px;" %)9000 Series|(% style="width:240px" %)HMI V2.0|(% style="width:284px" %)4|(% style="width:245px" %)Yes|(% style="width:240px" %)Yes|(% style="width:223px" %)Yes
++|=(% style="width: 190px;" %)3000ig Series|(% style="width:240px" %)HMI V2.0|(% style="width:284px" %)1|(% style="width:245px" %)No|(% style="width:240px" %)Yes|(% style="width:223px" %)Yes
++|=(% style="width: 190px;" %)8000ig Series|(% style="width:240px" %)HMI V2.0|(% style="width:284px" %)4|(% style="width:245px" %)Yes|(% style="width:240px" %)Yes|(% style="width:223px" %)Yes
++
++(% class="wikigeneratedid" %)
  The function address will occupy the 125 word address, the following table is using the HDW6000 as a example:
  (% style="width:892px" %)

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents