Changes for page 05 Objects

Last modified by Jett on 2025/07/04 09:41

From 82.1 to 81.1 From 87.8 to 87.7

From version 87.7

edited by Hunter
on 2024/02/19 14:37

Change comment: There is no comment for this version

To version 82.1

edited by Jim(Forgotten)
on 2023/08/11 09:27

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Hunter
++XWiki.Jim

Content

@@ -17,29 +17,29 @@
  **Read-write**
--* **Write Address: **Bit address operation control for HMI or PLC.
--* **Read**: Enable the monitoring the read address or not.
--* **Same read-write address**: Enable it if want to the read address and write address is exactly same.
--* **Read Address: **Monitoring address.
++* **Write Address: **Bit switch controls PLC or HMI address.
++* **Read Address: **Read and display PLC or HMI bit address state.
  **Mode**
--* **Set OFF:** Set off the write address.
--* **Set ON:** Set on the write address.
--* **Momentary:** Set on the write address when switch is pressed, and reset the address when switch is released.
--* **Delay: **Interval for keep on the write address. For example: Assign the delay time as 500, write address will be reset after release button in 0.5 second.
--* **Switch:** Switch between True(1) and False(0) when switch is triggered.
++* **Set OFF:** set off the write address.
++* **Set ON:** set on the write address.
++* **Momentary:** set on the write address when switch is pressed, and set off when switch is released.
++* **Delay:** set off the write address after a delay. (for example: assign the delay time as 5, write address will be set off after releasing 5 ms.)
++* **Switch:** switch between 0 and 1 each time the switch is triggered.
  **Display**
  * **Inverted Display: **Display the state picture and text of the object reversely.
--* **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
--* **Blink: **Blinking while control bit is triggered;
--** **Blink when ON: **Blink when control bit is ON.
--** **Blink when OFF: **Blink when control bit is OFF.
++* **Quick Read: **The speed of configuring the object is priority to other objects.
--**Minimum hold time: **Only when the time of press and hold the object is greater than the set value, the object function will be executed.
++**Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;
++* **Blink when ON: **blink when control bit is ON.
++* **Blink when OFF: **blink when control bit is OFF.
++
++**Minimum hold time: **Only when the time of pressing the object is greater than or equal to the set minimum hold time will the function of the object be performed.
++
  **Indirect addressing:**
  * **Read address**: Use the value of the read address to determine the address A after deviation, and use the address A as the read address of the object.
@@ -103,19 +103,6 @@
  (% style="text-align:center" %)
  [[image:位开关 6.png||class="img-thumbnail"]]
--**No trigger:** No way to trigger
--
--**Trigger before pressing:** Trigger bit address is set to 1 before pressing
--
--**Trigger after pressing: **After pressing Enter, trigger bit address is set to 1 before closing the keyboard
--
--**Trigger and reset before pressing: **Trigger bit address is set to 1 and then set to 0 bedore pressing
--
--**Trigger and reset after pressing: **After pressing Enter, trigger bit address is set to 1 and then set to 0 before closing the keyboard
--
--**Trigger before pressing, reset after: **Trigger bit address is set to 1 before pressing; After pressing Enter, trigger bit address is set to 0 before closing the keyboard
--
--
  **Access denied setting**
  Users can set enable password for object. There are following operating setting when user permissions are insufficient. But "Pop login screen" and "Hide object" are mutually exclusive.
@@ -199,20 +199,18 @@
  (% style="text-align:center" %)
  [[image:6.Objects_html_273aed06eb8f10f9.gif||class="img-thumbnail"]]
--**Address**: Monitoring and display the address status.
++**Address**: It is for setting specified PLC or HMI bit address。
  **Hide**
--* **Inverted Display: **Display reverse state of the picture and text. For example, the value of write address is on (Corresponding to state 1), while the graphic of off (Corresponding to state 0) is displayed.
--* **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
--* **Blink: **Blink condition;
--** Blink when ON: blink when read address is ON.
--** Blink when OFF: blink when read address is OFF.
--* **Hide: **Control the hide status of object via Control Bit's state. Hide object cannot be operated at all.
--* **Control Bit: **Hide condition.
--** **Hide when OFF**: Hide when control bit is OFF.
--** **Hide when ON**: Hide when control bit is ON.
--** **Invisible:** Object is always keeps hidden during project running.
++* **Inverted Display: **Display reverse state of the picture and text. *for example, the value of write address is set ON, the OFF mode is displayed.
++* **Blinking: **Blinking while control bit is triggered, the frequency is editable;
++** Blink when ON: blink when control bit is ON.
++** Blink when OFF: blink when control bit is OFF.
++* **Hide: **Display or hide object by "Control Bit" state.
++* **Control bit: **For hide control.
++** **Hide mode: **hide when OFF; hide when ON;it could not operate if [Invisible] is checked.
++** **Invisible:** object keeps hidden during project running.
  (% class="box infomessage" %)
  (((
@@ -230,20 +230,21 @@
  **Edit**
--* **Read address: **Read value from object display.
--* **Same read-write address**: Enable it if want to the read address and write address is exactly same.
++* **Read address: **Read value from specified address.
  * **Write address: **Write value to specified address.
++Read and write address could be the same;
++
  **Data format**
--* **Format**: Set the data format: 16bit BCD, 16bit Unsigned, 16bit Signed, 32bit BCD, 32bit Unsigned, 32bit Signed, 32bit Float.
++* **Format**: It is for setting operating data format; it could support seven modes.
--**Mode**
++**Mode**. It is for setting operating mode for value, it could support 3 modes.
  * **Set value: **Set a constant value for the word address.
--* **Increase: **Increase Operand value for each time the switch is triggered.
--* **Decrease:** Decrease Operand value for each time the switch is triggered.
--* **High/Low limit:** The value will be not able to change when the value reaches limits.
++* **Increase: **Increase the [operand] value for each time the switch is triggered.
++* **Decrease:** Decrease the [operand] value for each time the switch is triggered.
++* **High/Low limit:** The value will not increase/decrease when the value reaches limits.
  (% class="box infomessage" %)
  (((
@@ -264,45 +264,53 @@
  **Address**
--* **Read address:** Read the value from object display.
--* **States count: **Total status number for current word address, which could change the state value according to different status in button [State values], range: 1-256.
--* **State with value out of range**: When the value of the read address is not on the range of states' value, it will cause no corresponding status number is displayed. There are two modes for process when the value is out of range.
--* **Hide**: Hide the object when the value is out of range;
--* **Show state**: Specify a status when the value is out of range, for example the total states is 6(range from state No.0~~No.5), but the read value is 6, at this moment the object will show the state No.0 if selected item of show state is No.0;
++* **Read address:** read the value from specified address.
++**States settings**
++
++* **States count: **The default Word state displays the number of States 1, which could be selected by the drop-down list to display the state of object, range: 1-256.
++* **State value: **Users could set different values to correspond to different states, the setting window as below figure shows.
++
  **For example**
--The state No.0 default fill value 0, No.1 default fill value 1... and so on.
++By default, when value of read address is 0, object displays state 0.
  If change settings as below figure shows
--When value of read address is 11, object displays state No.1.
++When value of read address is 11, object displays state 1.
  (% style="text-align:center" %)
  [[image:6.Objects_html_da9a6696f320b427.gif||class="img-thumbnail"]]
++**State of value out of range: **When the value of read address exceeds the maximum state number, there is no corresponding state to be displayed. So there are two modes of processing for it: "Hide" and "Show state"
++
++**Hide: **When the value of the read address exceeds the set range value, the word state display object will be blank.
++
++**Show state: **When the value of the read address exceeds the set range value, the object will display the "Specified state". For example, set the maximum is state 7 (value is 6), when the read address of the value is greater than 6, it will display state 2 text and pictures.
++
  **Transform state**
--* **Quick Read: **The priority of read and write is higher than any other objects on the same screen.
++* **Quick Read: **Directly read the value of the connected device without going through the HMI cache
  * **Auto transforms:** Object switch states automatically
  (% style="text-align:center" %)
  [[image:6.Objects_html_b643c9a6a4bd6919.gif||class="img-thumbnail"]]
--* **Trigger to transform: **Trigger condition of auto transform
--* **Auto return:** Return to the initial state after reaching the final state;
--* **Time of transform:** Set the interval of transform between two states;
--* **Dynamic interval: **Set the dynamic interval of transform between two states. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
++**Trigger:**Control bit to enable switch automatically
++* **Auto return:** return to the initial state after reaching the final state;
++* **Time of transform:** it is used for setting the frequency in automatic switching state. Unit: 100ms.
++* **Dynamic interval: **set the frequency of automatic switching state and read it from the address. Unit: 100ms. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.
++
  **Manual**
  (% style="text-align:center" %)
  [[image:6.Objects_html_a8b6636bd862369c.gif||class="img-thumbnail"]]
--* **Set state: **Set a constant value to address(according to the operate state selection) when click the object.
--* **State increase: **Increase the address value by one step when click the object, the upper limit is depends on the Last state selection.
--* **State decrease:** Decrease the address value by one step when click the object, the lower limit is depends on the Last state selection..
--* **Last state: **The upper limit or lower limit(Final state) of state increase/decrease;
++* **Set state: **Set a constant value for the word address.
++* **State increase: **Increase state for each time the switch is triggered.
++* **State decrease:** Decrease state for each time the switch is triggered.
++* **Last state:** The state will not increase/decrease when reaches limits.
  (% class="box infomessage" %)
  (((
@@ -309,9 +309,9 @@
  ✎**Note:** For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
  )))
--== Button ==
++== Keypad switch ==
--Button is designed to input data manually; this object need to work with the numeric input and character input. User could assign letters or numbers for each button.
++Keypad switch is designed to input data manually; this object need to work with the Keypad.User could assign letters or numbers for each switch, when the switch is triggered the data will input to the textbox.
  **Description**
@@ -1654,14 +1654,11 @@
 . **Variable QR:** It is for setting read address, the content of QR code is from this setting address.
 . **QR String: **It is for set static content for QR code.
--(% class="box infomessage" %)
--(((
  **✎Note:**
  * HMI machine ID address: HSW10494 ~~ HSW10558.
  * So if user want to use QR code to display machine ID on project screen, please check "Variable QR", and set address is HSW10494.
  * When scanning the QR code by APP to monitor HMI, the default access password is 888888.
--)))
  == **Picture** ==
@@ -1690,13 +1690,10 @@
 . **Folder: **Set the name of the folder where the picture is located.The folder name can be up to 31 characters. （Note：The picture must be stored in the U disk folder and cannot be stored in the root directory of the U disk.）
 . **File address: **16 consecutive addresses enter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.
--(% class="box infomessage" %)
--(((
  ✎**Note:**
 . The image could be displayed in BMP, JPG, PNG, and JPEG formats. Images with a resolution of 1920 x 1080 or higher are not supported.
 . For the setting of [[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".
--)))
  == **Rotation picture** ==
@@ -1820,12 +1820,9 @@
  Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Camera__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCameradisplay]](%%)].
--(% class="box infomessage" %)
--(((
  **✎Note:**
  This function requires special HMI model, the detailed information, please contact sales.
--)))
  === **IP Camera** ===
@@ -2441,7 +2441,7 @@
  ** ASHU S300 (640*480
  )))
--*
++* \\
  == **Camera control** ==
@@ -2617,10 +2617,8 @@
  English 2
  )))
--(% class="box infomessage" %)
--(((
++(% class="wikigeneratedid" %)
  ✎**Note:** For [[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".
--)))
  == **Time** ==

Changes for page 05 Objects

Summary

Details

Navigation

Table of Contents