05 Objects - Wecon

This chapter provides information about objects and a description of how to configure objects.

= **Button/Switch** =

Different button has different function.Such as: Bit Switch; Bit lamp; Word Switch; Word lamp; Function Switch; Keypad Switch; Combination Switch.

== Bit switch ==

Bit switch is designed to access the bit-address of the PLC/HMI. When bit switch is triggered, the changing of "Write Address" depends on the mode setting. When "Read" option is selected, the "Read Address" is editable.

=== General ===

To operate, monitor and display the specified PLC or HMI bit address. When the bit switch is pressed, the bit value of the operation address changes as described by the switch type. When Monitor is available, the state displayed by the bit switch is the state of the bit to which the monitor address is pointing.

14

15

(% style="text-align:center" %)

16

[[image:位开关 1.png||class="img-thumbnail"]]

**Read-write**

* **Write Address: **Bit switch controls PLC or HMI address.

21

* **Read Address: **Read and display PLC or HMI bit address state.

**Mode**

* **Set OFF:** set off the write address.

26

* **Set ON:** set on the write address.

27

* **Momentary:** set on the write address when switch is pressed, and set off when switch is released.

28

* **Delay:** set off the write address after a delay. (for example: assign the delay time as 5, write address will be set off after releasing 5 ms.)

29

* **Switch:** switch between 0 and 1 each time the switch is triggered.

**Display**

* **Inverted Display: **Display the state picture and text of the object reversely.

34

* **Quick Read: **The speed of configuring the object is priority to other objects.

35

36

**Blink: **Control the state of blink by the bit address of control bit. Blinking while control bit is triggered, the frequency is editable;

37

38

* **Blink when ON: **blink when control bit is ON.

39

* **Blink when OFF: **blink when control bit is OFF.

40

41

**Minimum hold time: **Only when the time of pressing the object is greater than or equal to the set minimum hold time will the function of the object be performed.

42

43

**Indirect addressing:**

44

45

* **Read address**: Use the value of the read address to determine the address A after deviation, and use the address A as the read address of the object.

46

47

**For example:**: HDX11.0 is the read address of the object. The three indirect read address is D0, E1, and HDW2. The system would read the value of address HDW2.

48

49

If its value is 22, and the second indirect read address E1 would update to E23, then the system would read the value of E23.

50

51

If its value is 33, then the first indirect read address D0 would update to D33, then the value of D33 is 44, that is, the bit of deviation is 44 bits.

52

53

A word has 16 bits, divide 16 into 44, and the answer is 2, remainder 12. Therefore, the read address of object is update from HDX11.0 to HDX13.12, and the final read address is HDX13.12.

54

55

**Write address**: It is the same as the read address.

=== Text ===

(% style="text-align:center" %)

60

[[image:位开关 2.png||class="img-thumbnail"]]

61

62

**All languages: **Edit the texts of all the languages of the object in a time. A maximum of 8 languages are supported.

63

64

(% style="text-align:center" %)

65

[[image:6.Objects_html_fd7dea026037c591.gif||class="img-thumbnail"]]

66

67

**All states: **Edit the texts of all the states of the object in a time.

68

69

**Font: **Set the font of the text after selecting the state. The number of the characters input is displayed.

70

71

**Copy attribute to states:** Set the color of font after selecting state and text, and click "Copy attribute to states", then they would be in the same color.

72

73

**Copy text: **Click it and the texts of all the objects would be the same.

74

75

**Copy style: **Click it and the styles of all the objects would be the same.

=== Graphic ===

(% style="text-align:center" %)

80

[[image:位开关 3.png||class="img-thumbnail"]]

81

82

**Bitmap:** You could design beautiful scenes with bitmap. Static diagram and bitmap with states are supported.

83

84

**Vectogram: **Use to figure SVG vector diagram is concise and lively geometry, generally shows the various industrial field, with the performance of the more abundant than bitmap method, and the vector diagram drawing will not be needed or scaling distortion.

=== Security ===

(% style="text-align:center" %)

89

[[image:位开关 4.png||class="img-thumbnail"]]

**Object lock**

* **Lock address: **Using interlock address, address 0 means that the object would be locked and display a lock icon. Only when the interlock-bit address points to 1 will the bit switch be operated.

94

* **Hide "lock" icon: **If don't want to display the icon, you may check it. will be "no show" lock "icon" tick.

95

* **Lock when "ON":** check it and the bit address will be locked when the interlock address is set to 1.

96

97

**Touch available: **If you check it, you could operate the object when you touch it.

98

99

**Enable beep: **If you check it, the object will beep when you touch it.

100

101

**Extended trigger functions. **It is only valid for PLC address.

102

103

(% style="text-align:center" %)

104

[[image:位开关 6.png||class="img-thumbnail"]]

105

106

**Access denied setting**

107

108

Users can set enable password for object. There are following operating setting when user permissions are insufficient. But "Pop login screen" and "Hide object" are mutually exclusive.

109

110

* **Pop login screen**

111

** Every time: Userlogin screen will pop-up when user permissions are insufficient;

112

** When change user: Userlogin screen will pop-up when user permissions, and if users logged in successfully, the previous users will log out.

113

** Pop once: Userlogin screen will pop-up when user permissions are insufficient, but when user enter the right password, this object can be operated by anyone.

114

* **Hide object: **When the user has no permission, the object is hidden. When the user has permission, the object is displayed and can be operated.

=== Animation ===

(% style="text-align:center" %)

119

[[image:位开关 5.png||class="img-thumbnail"]]

**Data format**

This format is for settings address, and it is fixed for all objects.

**Proportion:**

The proportional gain setting is a proportional change to the moving and scaling values. Result=Gain*original value+Offset. This function is just for display. Actual value is still the original value.

128

129

For example, the HDW1 original value is 5, Gain is 0.001, Offset is 0. The final result will be displayed as 0.005, while HDW1 actual value still is 5.

130

131

For example: If the proportional gain value is x and the moving or scaling value is y, then the actual moving or scaling value is (x*y).

**Movement**

The function of [Movement] is to move the position of object on the screen according to the value of address and movement type.

136

137

There are three movement type:

* X-axis movement.

* Y-axis movement.

* XY-axis movement.

**For ex**a**mple**

If the starting address of the movement is HDW10 and the movement type is [XY axis movement], HDW10 controls the X-axis movement, and HDW11 controls the Y-axis movement.

**Deform**

Deform object display size on screen mainly depends on width and height.

150

151

Deform type: left, right, up, down, left and right, up and down, right/left and up/down, right/left or up/down.

152

153

=== Address editor ===

154

155

The address editor is a tool used to assist in generating address strings. The address of object is composed of connection, device station number, device type and address number.

156

157

(% style="text-align:center" %)

158

[[image:地址编辑器.png||class="img-thumbnail"]]

159

160

(% class="table-bordered" %)

161

|=(% style="width: 207px;" %)Name|=(% style="width: 868px;" %)Description

162

|(% style="width:207px" %)PLC address/station NO.|(% style="width:868px" %)Set the device station NO. to access. If default station NO. is selected, then the station NO. is the de The station number is the default station number for "Connection" settings in "System Parameters".

163

|(% style="width:207px" %)User input|(% style="width:868px" %)The address is not from address library, but a string.

164

|(% style="width:207px" %)From address Library|(% style="width:868px" %)The address is selected from address library. If there is no data in address library, it is invalid.

165

|(% style="width:207px" %)System address|(% style="width:868px" %)Display all the items of address library. The current one is the address referenced by the object.

166

|(% style="width:207px" %)Connection|(% style="width:868px" %)PLC that already exists in the project.

167

|(% style="width:207px" %)Address type|(% style="width:868px" %)The address type or internal register type included in the PLC selected by the project.

168

|(% style="width:207px" %)Address NO.|(% style="width:868px" %)To input address NO.

169

|(% style="width:207px" %)A to F and 0 to 9|(% style="width:868px" %)To input address NO. through mouse.

170

|(% style="width:207px" %)Clear|(% style="width:868px" %)Clear the content of edit box of address.

171

|(% style="width:207px" %)**←**|(% style="width:868px" %)Backspace. To delete the last character of the edit box.

172

|(% style="width:207px" %)Close|(% style="width:868px" %)Close address editor

173

|(% style="width:207px" %)OK|(% style="width:868px" %)(((

174

Close the editor and save the editing results.

175

176

* If selecting "From address Library", the result would be saved in the address library

177

* If selecting "User input", the result would be saved in the property of the object

)))

== Bit lamp ==

"Bit Lamp" could monitor and display the specified PLC or HMI bit address, and its state changes according to the specified address value.

**Description**

(% style="text-align:center" %)

187

[[image:6.Objects_html_273aed06eb8f10f9.gif||class="img-thumbnail"]]

188

189

**Address**: It is for setting specified PLC or HMI bit address。

**Hide**

* **Inverted Display: **Display reverse state of the picture and text. *for example, the value of write address is set ON, the OFF mode is displayed.

194

* **Blinking: **Blinking while control bit is triggered, the frequency is editable;

195

** Blink when ON: blink when control bit is ON.

196

** Blink when OFF: blink when control bit is OFF.

197

* **Hide: **Display or hide object by "Control Bit" state.

198

* **Control bit: **For hide control.

199

** **Hide mode: **hide when OFF; hide when ON;it could not operate if [Invisible] is checked.

200

** **Invisible:** object keeps hidden during project running.

201

202

(% class="box infomessage" %)

203

(((

204

✎**Note:** For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

205

)))

206

207

== **Word switch** ==

208

209

"Word Switch" could change value of specified PLC or HMI word address, when the switch is triggered the value will be written to specified address.

**Description**

(% style="text-align:center" %)

214

[[image:6.Objects_html_38205e64b9d02546.gif||class="img-thumbnail"]]

**Edit**

* **Read address: **Read value from specified address.

219

* **Write address: **Write value to specified address.

220

221

Read and write address could be the same;

**Data format**

* **Format**: It is for setting operating data format; it could support seven modes.

226

227

**Mode**. It is for setting operating mode for value, it could support 3 modes.

228

229

* **Set value: **Set a constant value for the word address.

230

* **Increase: **Increase the [operand] value for each time the switch is triggered.

231

* **Decrease:** Decrease the [operand] value for each time the switch is triggered.

232

* **High/Low limit:** The value will not increase/decrease when the value reaches limits.

233

234

(% class="box infomessage" %)

(((

✎**Note:**

* When 32-bit floating (7 digits) is selected, the operating length is double words.

239

* For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

)))

== Word lamp ==

"Word Lamp" could display value of specified PLC or HMI word address, the display state of the component changes as the value of the read address changes.

**Description**

(% style="text-align:center" %)

249

[[image:6.Objects_html_975dc10baad35155.gif||class="img-thumbnail"]]

**Address**

* **Read address:** read the value from specified address.

**States settings**

* **States count: **The default Word state displays the number of States 1, which could be selected by the drop-down list to display the state of object, range: 1-256.

258

* **State value: **Users could set different values to correspond to different states, the setting window as below figure shows.

**For example**

By default, when value of read address is 0, object displays state 0.

263

264

If change settings as below figure shows

265

266

When value of read address is 11, object displays state 1.

267

268

(% style="text-align:center" %)

269

[[image:6.Objects_html_da9a6696f320b427.gif||class="img-thumbnail"]]

270

271

**State of value out of range: **When the value of read address exceeds the maximum state number, there is no corresponding state to be displayed. So there are two modes of processing for it: "Hide" and "Show state"

272

273

**Hide: **When the value of the read address exceeds the set range value, the word state display object will be blank.

274

275

**Show state: **When the value of the read address exceeds the set range value, the object will display the "Specified state". For example, set the maximum is state 7 (value is 6), when the read address of the value is greater than 6, it will display state 2 text and pictures.

**Transform state**

* **Quick Read: **Directly read the value of the connected device without going through the HMI cache

280

* **Auto transforms:** Object switch states automatically

281

282

(% style="text-align:center" %)

283

[[image:6.Objects_html_b643c9a6a4bd6919.gif||class="img-thumbnail"]]

284

285

**Trigger:**Control bit to enable switch automatically

286

287

* **Auto return:** return to the initial state after reaching the final state;

288

* **Time of transform:** it is used for setting the frequency in automatic switching state. Unit: 100ms.

289

* **Dynamic interval: **set the frequency of automatic switching state and read it from the address. Unit: 100ms. If the value in address is 10, then the frequency of automatic switching state is 10*100ms = 1s.

**Manual**

(% style="text-align:center" %)

294

[[image:6.Objects_html_a8b6636bd862369c.gif||class="img-thumbnail"]]

295

296

* **Set state: **Set a constant value for the word address.

297

* **State increase: **Increase state for each time the switch is triggered.

298

* **State decrease:** Decrease state for each time the switch is triggered.

299

* **Last state:** The state will not increase/decrease when reaches limits.

300

301

(% class="box infomessage" %)

302

(((

303

✎**Note:** For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

)))

== Keypad switch ==

Keypad switch is designed to input data manually; this object need to work with the Keypad.User could assign letters or numbers for each switch, when the switch is triggered the data will input to the textbox.

**Description**

(% style="text-align:center" %)

313

[[image:6.Objects_html_d6c03586e0122856.gif||class="img-thumbnail"]]

314

315

1. **Control bit: **This is for control operation, such as "Enter", "Delete", "Clear", "Esc and so on.

316

1. **Allow input: **It supports input with ASCII character.

317

1. **Enable Beep:** It is for beep function, enable or disable.

318

319

(% class="box infomessage" %)

320

(((

321

✎**Note:** For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

322

)))

323

324

== Function switch ==

325

326

Function switch is designed to switch screens, and call and close sub screen, and transfer data record files.

**Description**

(% style="text-align:center" %)

331

[[image:6.Objects_html_31c4ad387507a16d.gif||class="img-thumbnail"]]

**Operation**

* **Screen No: **Switch to the selected screen, it could not be subscreen;

336

* **Open sub screen: **Pop-up selected sub screen, and set sub screen position, default position is (0, 0), this is the coordinates of the top left corner of the screen;

337

338

(% style="text-align:center" %)

339

[[image:6.Objects_html_8b9a9cc4cb589d5b.gif||class="img-thumbnail"]]

340

341

* **Previous: **Switch to the previous screen in the screen list;

342

* **Next:** Switch to the next screen in the screen list;

343

* **Go back: **Switch to the previous operating screen;

344

* **Close sub screen:** Close current sub screen;

345

* **Instalment screen:** Pop-up installment setting screen, only valid when the installment is enabled;

346

* **Flash data to Udisk: **Copy data file from HMI Flash to Udisk, alarm, data record and recipe files could be copied;

347

348

(% style="text-align:center" %)

349

[[image:6.Objects_html_23b1992891d2600e.gif||class="img-thumbnail"]]

350

351

* **SD data to Udisk:** Copy data file from SD card to Udisk, alarm and data record files could be copied;

352

353

(% style="text-align:center" %)

354

[[image:6.Objects_html_5a7c3fb03e5ffa88.gif||class="img-thumbnail"]]

355

356

* **File cache:** Copy the source path file or folder to the specified directory of the destination path;

357

358

(% style="text-align:center" %)

359

[[image:6.Objects_html_a68f2b0b1bf2758c.gif||class="img-thumbnail"]]

360

361

**Using trigger address**. As the figure above, when 00 is ON, then selected operation of the function switch will be executed.

362

363

**All terminals effect**. When this function is enabled, all terminals (screens, mobile phones, ipads, computers, etc.) will execute the function Switch Function simultaneously. For example, the screens of each terminal are different. When the screen is clicked to jump to the "Home" screen, all terminals will jump to the home screen.

364

365

(% class="box infomessage" %)

(((

✎**Note:**

1. Some special characters like \ : * ? “ <> | are not allowed in file path, otherwise an error (the following characters could not be included in the file name.| >< : * “ ? \) may occur.

370

1. If you use SD card which HMI doesn't support, then you select the SD card as path,an error may occur.

371

1. When users save directory, source path and destination path should end with [/], such as: [data/].

372

373

* If source path or destination path is empty, there will be an error: [please set source and destination paths].

374

* If source path or destination path contain more than two consecutive [/], there will be an error: [invalid path].

375

376

(% start="4" %)

377

1. When users save specified file, it is necessary to set specified file path and file name. Such as: "data/a.txt". If there is no file name in path, there will be an error: "please set source path!" or "Please set destination path!"

378

1. For [[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]/[[graphics>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HGraphic]]/[[Security>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HSecurity]]/[[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".

379

)))

380

381

== Combination switch ==

382

383

The combination switch supports the collection of multiple functions onto one object. When the object is pressed, multiple functions are arranged in sequence to meet the special requirements of the user.

384

385

The combination switch contains sub-functions such as bit operation, word operation, arithmetic and screen change. Click the corresponding button on the "General" of the object to add sub-functions to the list, and up to 100 sub-functions can be added.

386

387

(% class="box infomessage" %)

388

(((

389

✎**Note:** there can only be one screen change function in the added sub-functions, and it is at the end of the list).

)))

**Description**

(% style="text-align:center" %)

395

[[image:6.Objects_html_9a71b56fbf80e666.gif||class="img-thumbnail"]]

**Bit operation**

(% style="text-align:center" %)

400

[[image:6.Objects_html_c750a09f5dbfa752.gif||class="img-thumbnail"]]

401

402

It provides "Bit copy", "Set ON", "Set OFF", "Momentary" and "Switch" functions, and it could operate continuous bit addresses according to setting length,and the maximum length is 1024.

403

404

**Bit address length: **The length of operated addresses;

405

406

Example: "Target bit address" is 00, "Type" is Set ON,the length is 3,when press the button,the 00~~02 will be ON.

**Word operation**

(% style="text-align:center" %)

412

[[image:6.Objects_html_a156365754b131b1.gif||class="img-thumbnail"]]

413

414

It provides "Word copy", "Word set", "Increase" and "Decrease" functions, and it could operate maximum 2048 word addresses, and the operating length will be changed according to data formats.

415

416

* If data format is 16-bit signed (unsigned), the operation address is the source address 0~~source address +2048.

417

* If data format is 32-bit signed (unsigned), the operation address is the source address 0~~source address +4096.

418

419

**Word addresses length: **The length of operated addresses.

420

421

* If "Target word address" is 40, "Type" is Word set, and operand is 10, the length is 3 when pressing the button, the 40~~42 will be 10.

**Arithmetic**

(% style="text-align:center" %)

426

[[image:6.Objects_html_ab29c7e6e94aae46.gif||class="img-thumbnail"]]

427

428

It provides functions such as "Add", "Subtract", "Multiply", "Divide", "Mod' and "Power".

**Screen change**

It provides screen switch function as [Function Switch], it supports "Previous", "Next", "Return" and "Change to" operations.

433

434

(% style="text-align:center" %)

435

[[image:6.Objects_html_7c228a61fec158e9.gif||class="img-thumbnail"]]

**Operation list**

"Operations list" displays all operations, HMI will execute operations in order, but [screen switch] will be listed as the last execution item directly.

**Operation button**

* **Delete: **Delete selected item function;

444

* **Empty: **Delete all items in operation list;

445

* **Up:** Move the selected item up one row in operation list;

446

* **Down: **Move the selected item down one row in operation list;

**Advanced setting**

Control the whole combination switch configuration.

451

452

(% style="text-align:center" %)

453

[[image:6.Objects_html_4cfcf7f6876ed91e.gif||class="img-thumbnail"]]

454

455

* **Bit trigger: **it controls sub-function option of combination switch configuration by trigger address is ON.

456

* **Continuous run: **it executes each sub-function according to "Cycle time" and "Run times".

457

* **Cycle time: **Interval between sub-functions execute once with next time.

458

* **Run times: **Configuration sub-function execute times. 0 means unlimited times.

459

* **Break:** Stop executing sub-function when trigger address is ON.

✎**Note:**

* Nested patterns of object cycle and sub-function cycles are as follows.

464

** The cycle time is independent.

465

** The object performs one cycle, all the sub-functions would be performed once.

466

** If the object cycle ends earlier than the sub-function cycle, the sub-function would complete the remaining number of cycles.

467

** If the object cycle ends later than the sub-function cycle, the sub-function cycle would be triggered again.

468

** If the main cycle is triggered again before it finishes, then the main cycle is executed immediately when clicked and only one more time.

469

* For [[text>>https://docs.we-con.com.cn/bin/view/PIStudio/7.Library/#HText]]/[[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

== Slider switch ==

Slide switch is a special switch object. By changing the position of the slider, the corresponding address value would be changed. At the same time, the slider position will change according to the address value.

474

475

(% style="text-align:center" %)

476

[[image:6.Objects_html_cc27b49cc3421a77.gif||class="img-thumbnail"]]

**Attributes:**

* **Write address:** The address needs to be written and monitored

481

* **Data format: **Support 16-bit signed / unsigned decimal number, 32-bit signed / unsigned decimal number, floating number is not supported.

**Scale range:**

* **Upper/lower limit: **The range of data that can be manipulated by the slider. The value is scaled according to the decimal place of the data format.

486

* **Variable range: **When this function is checked, the value of the filling address will be used as the upper and lower limits of the scale.

487

* **Display upper/lower limit:** When this function is checked, the upper and lower limit data will be displayed in the slide switch.

**Function:**

* **Direction:** The slide switch provides four directions: from top to bottom, bottom to top, left to right, and right to left.

492

* **Min. scale: **The minimum scale unit when the slider is moved. The value is scaled according to the format. (Need to drag to move)

493

* **Scroll value: **The smallest unit of scale when the slider is moved. This value is scaled according to the format. (Need to drag to move)

494

* **Write address: **Display current value: Show the current value of the device address above the slider

495

* **Write immediately : **Write the value of the slide switch during the sliding process to the device address in real time.

496

* **Alarm value:** input the alarm value

497

* **Alarm color : **When "Alarm color" is ticked off, and the value of the device address reaches "Alarm value", the foreground color of the slide switch will be displayed as a warning color.

498

499

(% class="box infomessage" %)

500

(((

501

**✎Note: **Setting the number of decimal place will scale the data range in the data format and it is valid for all kind data formats

502

)))

503

504

(% style="text-align:center" %)

505

[[image:6.Objects_html_65b8338bfb56a238.gif||class="img-thumbnail"]]

**Slide rail**

* **Border color: **Tick off to display the border color

510

* **Foreground color: **The color of the slide rail where the slider slides over. If not checked, the color will be displayed transparently

511

* **Background color: **The color of the slide rail where the slider does not slide over. If it is not checked, it will be displayed transparently.

512

* **Height: **slide rail height

513

* **Shape: **Set the style (right or rounded angle) of the rails

**Slider**

* **Color: **Tick off to display the slider color, otherwise it is displayed transparently.

518

* **Shape: **Set the slider style (square or circle).

519

** When circle is selected, need to set the diameter of the slider.

520

** When square is selected, need to set the height and width of the slider.

521

522

The width, height and diameter of the slide rail and slider are displayed as a percentage relative to the height of the object.

523

524

* When the slide rail is displayed horizontally

525

** The height of the slide rail is displayed as a percentage of the height of the object.

526

** The diameter of the circular slider is displayed as a percentage of the height of the object, and it is recommended that the diameter of the slider be greater than or equal to 2 times the height of the slide rail.

527

** The width and height of the square slider are displayed as a percentage of the height of the part, and it is recommended that the width of the slider should be greater than or equal to the height of the slide rail.

528

* When the rails are displayed vertically

529

** The height of the slide rail is displayed as a percentage of the width of the part.

530

** The diameter of the circular slider is displayed as a percentage of the width of the object, and it is recommended that the diameter of the slider should be greater than or equal to 2 times the width of the slide rail.

531

** The width and height of the square slider are displayed as a percentage of the width of the object, and it is recommended that the width of the slider should be greater than or equal to the width of the slide rail.

532

533

**Preview**: Display the setting result of slider switch.

534

535

(% class="box infomessage" %)

536

(((

537

✎**Note:** For [[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

538

)))

539

540

= **Input/Display** =

541

542

This object can input/display number or character. User just needs to set a controller's address and set data format. HMI will be able to display/control controller's data.

543

544

== Numeric Input/Display ==

545

546

"Numeric Input/Display" displays the device's data or writes data to the device in a specified numeric format, and the data could be scaled.

547

548

(% style="text-align:center" %)

549

[[image:6-1NumericInput.png||class="img-thumbnail"]]

**General**

* **Read Address:** The data from designated address will be displayed.

554

* **Input: **Enable input function and "Write Address" configuration.

555

* **Same read-write address:** Configure [Write Address] is the same as "Read Address".

556

* **Write address: **Write data to designated address. The address could be different from "Read Address".

557

* **Keypad:** it is standard numeric keypad, allow to input decimal and floating;

558

559

(% class="box infomessage" %)

560

(((

561

**✎Note: **Check it to use the comment information on the keyboard. When the user clicks on the part, the comment information will be written into the HUW1402 for display. The maximum length allowed for the comment is 63 characters;

562

)))

563

564

* **Continuous Input: **Use the same keyboard to input the objects from the same Group NO according to the order of NO, and automatically close the keyboard after the last NO(object) is input;

565

* **NO: **the number of numeric input object;

566

* **Group NO: **the group number of numeric input object;

**Display**

(% style="text-align:center" %)

571

[[image:6.Objects_html_a6448568aa9b4008.gif||class="img-thumbnail"]]

572

573

* **Font:** It is located in font list; user could select font directly.

574

* **Trim 0 display**: The last digit of the decimal only display the non-zero part, such as 6.30 will be displayed as 6.3.

575

* **Input as "*":** The data is shown as "*".

576

* **Alignment:** There are three modes.

577

* **Center:** data display on the center of object.

578

* **Align left: **Data display on the left.

579

* **Align right: **Data display on the right.

**Data format**

(% style="text-align:center" %)

584

[[image:6.Objects_html_52ba758ebcea03f2.gif||class="img-thumbnail"]]

585

586

* **Date: **Select data format, below format could be supported.

587

588

(% style="text-align:center" %)

589

[[image:6.Objects_html_29902078fa1f9af5.gif||class="img-thumbnail"]]

590

591

* **Data format:** Configure data display format.

592

* **Range:** beyond the data range will be not inputted.

**Keypad position**

It is used for setting keypad position when input data.

**Label**

Configure label shown on the left/ right side of data.

601

602

(% class="box infomessage" %)

(((

✎**Note:**

* The significant digits of a single-precision float are 7 digits.

607

* For [[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

608

)))

609

610

== Character Input/Display ==

611

612

"Numeric Input/Display" displays the device's character or writes character to the device.

**Description**

(% style="text-align:center" %)

617

[[image:6.Objects_html_947ed6af324464.gif||class="img-thumbnail"]]

**General**

* **Read Address:** The data from designated address will be displayed.

622

* **Input: **Enable input function and "Write Address" configuration.

623

* **Same read-write address:** Configure "Write Address" is the same as "Read Address".

624

* **Read DWord: **Read address is 2 words format

625

* **Write address: **Write data to designated address. The address could be different "Read Address".

626

* **Keypad:** it is standard numeric keypad, allow to input decimal and floating;

627

628

(% class="box infomessage" %)

629

(((

630

**✎Note:** ** **Check it to use the comment information on the keyboard. When the user clicks on the part, the comment information will be written into the HUW1402 for display. The maximum length allowed for the comment is 63 characters;

631

)))

632

633

* **Continuous Input: **Use the same keyboard to input the objects from the same Group NO according to the order of NO, and automatically close the keyboard after the last NO (object) is input.

634

* **NO: **the number of numeric input object.

635

* **Group NO: **the group number of numeric input object.

636

637

(% class="box infomessage" %)

638

(((

639

**✎Note:** The Continuous Input function will be invalid if the Confirmation function is enabled.

)))

**Display**

* **Input as "*":** the data shown as "*".

645

* **Alignment:** There are three modes.

646

* **Center:** data display on the center of object.

647

* **Align left: **data display on the left.

648

* **Align right: **data display on the right.

649

* **Exchange high-low byte: **Exchange High-low byte: Check it to exchange and display the contents of the high and low bytes. If the number of contents is not a multiple of 2, the rounding process will be performed.

650

* **Length: **The length of characters, the maximum length is 256.

651

* **Exchange high-low word: **Check it to exchange and display the contents of high and low word. Only valid if the number of operating characters of the part is a multiple of 4.

**Keypad position**

It is used for setting keypad position when input data.

656

657

(% class="box infomessage" %)

658

(((

659

✎**Note:** For [[graphics>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HGraphic]]/[[security>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HSecurity]]/[[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>path:https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

)))

= **Chart** =

Chart can display the data by trend graph or data table. PIStudio supports different function’s Chart. It contains Trend Chart, History Trend Chart, Alarm Record Display, Data Record Display, Alarm Record Display, Recipe Display, List Box, File List Display, XY Plot, History XY Plot. Different chart has different function. Please check the detail information in the Help of PIStudio.

665

666

For example: Trend graph shows the data as a dynamic curve, the X axis represent the time, Y axis represent the data. Alarm Record Display record alarm, the time span set by the user, and the alarm record will list by the time sequence.

667

668

== Common settings ==

**Introduction**

This section will introduce common settings in Chart objects.

**Shape**

(% style="text-align:center" %)

677

[[image:6.Objects_html_9f4692cce1805843.gif||class="img-thumbnail"]]

678

679

Set appearance of object, including background color, head color, text color, line color, select row color.

**Advance**

(% style="text-align:center" %)

684

[[image:6.Objects_html_54a82434205332fb.gif||class="img-thumbnail"]]

685

686

* **Head text color**: It sets the text color of the header.

687

* **Transparency**: It sets transparency of the table background, 0% represents full transparency, and 100% represents completely opaque.

688

* **Cell type**: Default is adaptive width. After selecting customization, customization could set the width of the cell.

689

* **Date and time format: **According to the needs to select the date and time display format. "NONE" means no display; please do not set both time and date to "NONE".

690

691

**Function start address**

692

693

Instructions for the use of the function start address of record display/alarm display/trend charts etc.

694

695

(% style="text-align:center" %)

696

[[image:6.Objects_html_361b1ee164769c5d.gif||class="img-thumbnail"]]

697

698

The address you fill in is only the start address. This address, including 20 consecutive addresses after this address, will be occupied. Please organize your address to prevent unnecessary errors from being reused.

699

700

**For example,** HDW0 is the function start address, then the addresses HDW0 to HDW19 are occupied. If you need the power-down storage setting, you may set the address as the address of register HAW (HAW0 to HAW200000).

701

702

If the start address is set as HDW0, the function and address table is as below.

703

704

(% class="table-bordered" %)

705

|=(% style="width: 277px;" %)**Address**|=(% style="width: 113px;" %)**Type**|=(% style="width: 158px;" %)**Object**|=(% colspan="2" style="width: 528px;" %)**Function**

706

|(% style="width:277px" %)HDW0|(% style="width:113px" %)Word|(% rowspan="8" style="width:158px" %)Numeric input |(% colspan="2" style="width:528px" %)Start Time: Year

707

|(% style="width:277px" %)HDW1|(% style="width:113px" %)Word|(% colspan="2" style="width:528px" %)Start Time: Month

708

|(% style="width:277px" %)HDW2|(% style="width:113px" %)Word|(% colspan="2" style="width:528px" %)Start Time: Day

709

|(% style="width:277px" %)HDW3|(% style="width:113px" %)Word|(% colspan="2" style="width:528px" %)Start Time: Hour

710

|(% style="width:277px" %)HDW4|(% style="width:113px" %)Word|(% colspan="2" style="width:528px" %)Start Time: Minute

711

|(% style="width:277px" %)HDW5|(% style="width:113px" %)Word|(% colspan="2" style="width:528px" %)Start Time: Second

712

|(% style="width:277px" %)HDW6|(% style="width:113px" %)Word|(% colspan="2" style="width:528px" %)Span value setting. Unit view the next address

713

|(% style="width:277px" %)HDW7|(% style="width:113px" %)Word|(% colspan="2" style="width:528px" %)Span Unit: 0=Min, 1=Hour, 2=Day

714

|(% style="width:277px" %)HDW8|(% style="width:113px" %)Word|(% style="width:158px" %)Word Switch|(% colspan="2" style="width:528px" %)(((

715

Default as 1. It can contain 50 records per page

716

717

Page Up: Current Value minus 1.

718

719

Page Down: Current Value add 1.

Range: 1 to 65535

)))

|(% style="width:277px" %)HDX9.0|(% style="width:113px" %)Bit|(% rowspan="10" style="width:158px" %)Bit Switch|(% colspan="2" style="width:528px" %)Auto Refresh

724

|(% colspan="1" rowspan="8" style="width:277px" %)(((

725

HDW12

726

727

(Bit address control up and down left and right display)

728

)))|(% style="width:113px" %)HDW12.0|(% colspan="2" style="width:528px" %)(((

729

Table type object: Move one page up

730

731

History Trend Chart: Pop up query settings window

732

)))

733

|(% style="width:113px" %)HDW12.1|(% colspan="2" style="width:528px" %)(((

734

Table type object: Move one row up

735

736

History Trend Chart: Move one span down

737

)))

738

|(% style="width:113px" %)HDW12.2|(% colspan="2" style="width:528px" %)(((

739

Table type object: Move one page down

740

741

History Trend Chart: Move one span up

742

)))

743

|(% style="width:113px" %)HDW12.3|(% colspan="2" style="width:528px" %)(((

744

Table type object: Move one row down

745

746

History Trend Chart: Display/Hide slide bar

747

)))

748

|(% style="width:113px" %)HDW12.4|(% colspan="2" style="width:528px" %)(((

749

Table type object: Move one page left

750

751

History Trend Chart: Zoom in (Narrow time span down)

752

)))

753

|(% style="width:113px" %)HDW12.5|(% colspan="2" style="width:528px" %)(((

754

Table type object: Move one column left

755

756

History Trend Chart: Zoom out (Broaden time span up)

757

)))

758

|(% style="width:113px" %)HDW12.6|(% colspan="2" style="width:528px" %)Table type object: Move one page right

759

|(% style="width:113px" %)HDW12.7|(% colspan="2" style="width:528px" %)Table type object: Move one column right

760

|(% style="width:277px" %)HDX13.0|(% style="width:113px" %)Bit|(% colspan="2" style="width:528px" %)(((

761

Span Method：

762

763

~=0: Use the Span Value and Span Unit to query;

764

765

~=1: Use start time and end time to calculate the time span for query.

766

)))

767

|(% style="width:277px" %)HDW14|(% style="width:113px" %)Word|(% rowspan="6" style="width:158px" %)Numeric Input|(% rowspan="6" style="width:237px" %)Effective when HDX13.0=1|(% style="width:291px" %)End Time: Year

768

|(% style="width:277px" %)HDW15|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Month

769

|(% style="width:277px" %)HDW16|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Day

770

|(% style="width:277px" %)HDW17|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Hour

771

|(% style="width:277px" %)HDW18|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Minute

772

|(% style="width:277px" %)HDW19|(% style="width:113px" %)Word|(% style="width:291px" %)End Time: Second

**✎Note:**

* [Function address (20 words)] need to be HMI internal address;

777

* When the start time and end time of the query are enabled, if the end time is smaller than the start time, the system automatically swaps the start and end times to calculate the span of the query;

778

* After manually setting the start time and end time of the query, you need to manually update the data (the default will be automatically updated);

**Appearance**

(% style="text-align:center" %)

783

[[image:6.Objects_html_71f505c7146db030.gif||class="img-thumbnail"]]

784

785

* **Background type:** There are four modes, style 1 and style 2 are gradient mode, style 3 is solid color mode, and style 4 is transparent.

786

* **Transparency:** transparency could be set from 0% to 100%. when set to 0%, the background is completely transparent.

787

* **Position: **Show position coordinates for X and Y axes.

788

* **Size: **Set object size.

789

790

(% style="text-align:center" %)

791

[[image:6.Objects_html_64c6da58525278cb.gif||class="img-thumbnail"]]

792

793

* **Number of X, Y axis: **Set the number of grids on the XY axis could be set from 1 to 10 divisions.

794

* **Color setting: **Color1 is for object frame;color2 is for grid background.

795

* **Show dot:** Display the data points of each trend graph.

796

* **User font: **If check it, user could change the font for grid and time, if uncheck it, object uses build-in font.

797

* **Grid color: **Set color for grid, the default is black.

798

* **Scale color:** Set color for scale, the default is black.

799

* **Scale value color:** Set color for scale value, the default is black.

800

* **Data format:** select data format in object, it provides below format.

801

802

(% style="text-align:center" %)

803

[[image:6.Objects_html_9a454f1917bd1b77.gif||class="img-thumbnail"]]

804

805

**Time format: **Select time format in object, it provides below format.

806

807

(% style="text-align:center" %)

808

[[image:6.Objects_html_d5d647f7cb216d8f.gif||class="img-thumbnail"]]

809

810

* **Time type:** There are two time displaying type, one is only displaying the start and end time, and the other is displaying time for each cell.

811

* **Curve Fitting (XY)**

812

* **Line type:** Set the line type (line, curve) between two points.

813

* **Smoothness:** it sets the smoothness of curve. Smoothness sets the curve smoothness. Conversely, the corner of the curve is sharper.

814

815

== Real-time trend chart ==

816

817

Trend graph shows the data as a dynamic curve, X axis represent the time span, Y axis represent the data.

**Source**

* **Curve buffer: **Select data from and display data in term of curve.

822

* **Curve displays:** HMI will display curves according to select “Trend Chart“, and user could select which curves need to be displayed and select “Line type“ and “Color“ for each curve.

823

824

(% style="text-align:center" %)

825

[[image:image-20220616160423-7.png]]

826

827

(% style="text-align:center" %)

828

[[image:image-20220616160432-8.png]]

**Range**

Set data range limit of curve (max and min). Also, could set variable to control data range.

833

834

(% style="text-align:center" %)

835

[[image:image-20220616160834-11.png||class="img-thumbnail"]]

836

837

(% class="box infomessage" %)

838

(((

839

**✎Note:** For the setting of Real-time trend chart, please refer to "[[Trend chart>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HTrendchart]]"

840

)))

841

842

== History trend chart ==

843

844

The history trend will display data record with graph.X axis represents as time, and Y axis represents as data.

**Source**

* **Curve buffer: **Select data from "Data record", and display data in term of curve.

849

* **Curve displays: **HMI will display curves according to select "Data record", and user could select which curves need to be displayed and select "Line type", "Color" and select "Channel" for each curve.

850

851

(% style="text-align:center" %)

852

[[image:image-20220616160909-12.png]]

**Range**

Set data range limit of curve (max and min). Also could set variable to control data range;

**Function**

(% style="text-align:center" %)

861

[[image:image-20220616160920-14.png||class="img-thumbnail"]]

862

863

* **Start address: **Custom object for query function, HMI system assigns address according to the settings, and four control key and query screen will be created, user could see the query details in this query screen.

864

* **Use Dynamic channel: **It occupies 8 addresses; each address corresponds to the curve channel number. For example, the address is set to HDW10, it takes up HDW10 to HDW17. Where the value of HDW10 is 3, then the first curve in the trend graph shows the value of channel 3.

865

* **Start time: **Set start time and span for curve display.

**Result**

When all configurations are completed, when the HMI is running, it displays as shown below.

870

871

(% style="text-align:center" %)

872

[[image:image-20220802113935-1.gif]]

873

874

There are 8 buttons will display below the graph, shown as following.

875

876

1. [[image:image-20220616162002-15.jpeg]] Historical trend chart query button

877

1. [[image:image-20220616162008-16.png]] ** **Set the time and span of historical trend chart

878

1. [[image:image-20220616162013-17.png]] ** **Refresh

879

1. [[image:image-20220616162018-18.png]] ** **Move forward by span time

880

1. [[image:image-20220616162021-19.png]] **: **Move backwards by span time

881

1. [[image:image-20220616162025-20.png]] : Slider display control button, slider position can display the current time and the current numerical status of each curve.

882

1. [[image:image-20220616162028-21.png]] Zoom in by one time according to the length of the span.

883

1. [[image:image-20220616162032-22.png]] : Zoom out by one time according to the length of the span.

884

885

(% class="box infomessage" %)

886

(((

887

**✎Note: **For the setting of historical trend chart, please refer to "[[Trend chart>>path:https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HTrendchart]]".

888

)))

889

890

== Alarm record display ==

891

892

Display current alarm and history alarm information.After setting the time span, the history alarm record will list by the time span.

893

894

This object only displays content normally after the "Alarm Record" function is set.

895

896

(% style="text-align:center" %)

897

[[image:6.Objects_html_680530096b569128.gif||class="img-thumbnail"]]

**Settings**

(% style="text-align:center" %)

902

[[image:6.Objects_html_ae2b58548526a788.gif||class="img-thumbnail"]]

903

904

* **Alarm type: **There are two types for alarm function; one is [Current alarm record] and the other is "History alarm record".

905

* **Group No:** This group number is corresponding to ID from Alarm settings; this object only displays the alarm content within this ID range.

906

* **Display in reverse order: **The latest alarm information will be displayed at the top of object.

907

* **Alarm Record Setting**: This is for setting display items in object, the setting window as below shows.

908

909

(% style="text-align:center" %)

910

[[image:6.Objects_html_c39789a001b0224e.gif||class="img-thumbnail"]]

**Query Settings**

There are two modes for this settings, one is "Page control", and the other is "Use function address".

915

916

(% style="text-align:center" %)

917

[[image:6.Objects_html_29e47fc2c370aee5.gif||class="img-thumbnail"]]

918

919

**Page control: **it controls what object currently displays.

920

921

**For example: **Page control is 40,

922

923

* 40=1 means this object displays first page.

924

* 40=2 means this object displays second page.

925

* 40=3 means this object displays third page.

926

* ...

927

* 40=10 means this object display 10th page.

928

929

**✎Note:** Every page contains 50 records.

**Start Time**

It configures start query time and span.

934

935

(% style="text-align:center" %)

936

[[image:6.Objects_html_d2335d95f27b8e03.gif||class="img-thumbnail"]]

937

938

**Span: **set the time span from start time to end time of query.

**Result**

When all configurations are completed, when the HMI is running, alarm display object displays as shown below.

943

944

The query key is automatically displayed when user double-clicks object, and the system automatically generates a sub-screen that sets the query span.

945

946

(% style="text-align:center" %)

947

[[image:6.Objects_html_de2952171d05accd.gif||height="312" width="567" class="img-thumbnail"]]

948

949

* [[image:6.Objects_html_92e1910330039a59.gif||height="49" width="48" class="img-thumbnail"]] Query setting

950

* [[image:6.Objects_html_4efc52d4a7f1ea02.gif||height="49" width="49" class="img-thumbnail"]] Refresh page

951

* [[image:image-20220808142509-1.png||height="48" width="49" class="img-thumbnail"]]means moving up one row

952

* [[image:image-20220808142518-2.png||height="49" width="50" class="img-thumbnail"]]means page up.

953

* [[image:image-20220808142538-3.png||height="45" width="49" class="img-thumbnail"]] means moving down one row.

954

* [[image:image-20220808142546-4.png||class="img-thumbnail"]] means page down.

955

* [[image:image-20220808142603-5.png||class="img-thumbnail"]] means moving left column.

956

* [[image:image-20220808142610-6.png||class="img-thumbnail"]]means moving the display to the left.

957

* [[image:image-20220808142623-7.png||class="img-thumbnail"]]means moving right column.

958

* [[image:image-20220808142630-8.png||class="img-thumbnail"]]means moving the display to right.

959

960

(% class="box infomessage" %)

961

(((

962

**✎Note:** Please click here to set "[[Bit alarm>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HBitalarm]]" and "[[Word alarm>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HWordalarm]]".

963

)))

964

965

== Data record display ==

966

967

"Data Record Display" displays the value of the address set by the user in the data record in the form of a table. It provides the function of query. You could query all the recored data within a specified period. If the project does not edit data recored area or there is no historical data, data record would display nothing. You can dynamically set the query period on the HMI and save the power failure.

968

969

(% class="box infomessage" %)

970

(((

971

✎**Note: **The objects sunch as tables and trends charts are only support **"**song typeface". It is invalid if you set other fonts.

972

)))

973

974

This object only displays content normally after the "[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Data record__>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HDatarecord]](%%)" function is set.

975

976

(% style="text-align:center" %)

977

[[image:6.Objects_html_2ee00a2b90c062f6.gif||class="img-thumbnail"]]

**Record**

There are data of multiple groups could be set in the data record, but it could only display the data of one group at the same time. Therefore, during configuring, user need to specify the corresponding data record group number for each object.

982

983

(% style="text-align:center" %)

984

[[image:6.Objects_html_7d03f28e9a7ec548.gif||class="img-thumbnail"]]

985

986

**Display in reverse order**

987

988

It sorts by time by default. The oldest data record will be displayed at the top of it. If you check "Display in reverse order", the latest data record will be displayed at the top.

**Start Time**

(% style="text-align:center" %)

993

[[image:6.Objects_html_d2335d95f27b8e03.gif||class="img-thumbnail"]]

994

995

You can configure the start query time. Set the time span from start time to end time of query.

**Security**

(% style="text-align:center" %)

1000

[[image:6.Objects_html_3235c433cffea00f.gif||class="img-thumbnail"]]

1001

1002

* **Channel control address:** It continuously occupies 8-word addresses, the first 100-bit addresses control 100 channels of display/hide function. For example, if the address is set to HDW10, then HDX10.0=1 is hidden channel 1; HDX10.1=1 is hidden channel 2, and so on.

1003

* **Freeze first column:** Enable it, the first column (time column) of the data record will not move with the left and right pages.

1004

1005

For details about "function address", see "[[Common settings in chart objects>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCommonsettings]]".

1006

1007

The query key is automatically displayed when user double-clicks object, and the system automatically generates a sub-screen that sets the query span. When all configurations are completed, when the HMI is running, data record display object displays as shown below.

1008

1009

(% style="text-align:center" %)

1010

[[image:6.Objects_html_1d2246f5ca8e1f24.gif||height="347" width="567" class="img-thumbnail"]]

1011

1012

* [[image:6.Objects_html_92e1910330039a59.gif||height="52" width="50" class="img-thumbnail"]] Query setting: It is on the buttom right of corner. Click it, a sub-screen of query range would pop-up to set.

1013

* [[image:6.Objects_html_4efc52d4a7f1ea02.gif||height="50" width="50" class="img-thumbnail"]] Refresh the query results.

1014

* [[image:上翻 1.png||class="img-thumbnail"]]move one row up in the query range

1015

* [[image:上翻 2.png||class="img-thumbnail"]]move one page up in the query range

1016

* [[image:下翻 1.png||height="45" width="50" class="img-thumbnail"]]move one row down in the query range

1017

* [[image:下翻 2.png||height="36" width="50" class="img-thumbnail"]]move one page down in the query range

1018

* [[image:左翻 1.png||height="48" width="50" class="img-thumbnail"]]move one row left in the query range

1019

* [[image:左翻 2.png||height="49" width="50" class="img-thumbnail"]]move one page left in the query range

1020

* [[image:右翻 1.png||height="50" width="50" class="img-thumbnail"]]move one row right in the query range

1021

* [[image:右翻 2.png||height="50" width="50" class="img-thumbnail"]]move one page right in the query range

1022

1023

For details about the setting, please refer to "[[Data record display settings>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HDatarecorddisplay]]".

1024

1025

== **Recipe display** ==

1026

1027

"Recipe display" displays information (such as recipe, operations, and so on) in the form of a table.

1028

1029

This object not only displays the recipe, but also displays other content. The specific functions are described in detail later. And it only displays content normally after function is set.

1030

1031

**There are 8 types of operating files as follows. Except for recipe file, the other types are used for special purpose. **

1032

1033

(% style="text-align:center" %)

1034

[[image:配方 1.png||class="img-thumbnail"]]

1035

1036

**Function (Recipe File)**

1037

1038

* **File type: **There are more than one function in this object, this is for selecting function, select "Recipe File", when "Recipe function" is set, it will display recipe data in the form of a table.

1039

* **Folder name:** This is located to recipe function setting.

1040

* **Select line:** Select one line in list and display its line No. in this address.（Note：When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying the line No.）

1041

* For example, set 40,

1042

** if 40=1, the first row of object is selected.

1043

** If 40=2, the second row of object is selected.

1044

** ...

1045

** If 40=10, the 10th row of object is selected.

1046

* **Folder name address: **This is for setting recipe file name, in advance recipe mode.

1047

1048

(% style="text-align:center" %)

1049

[[image:6.Objects_html_38f1820209eedfb4.gif||class="img-thumbnail"]]

1050

1051

**Function (Operating Record)**

1052

1053

(% style="text-align:center" %)

1054

[[image:6.Objects_html_d6c16aee84067851.gif||class="img-thumbnail"]]

1055

1056

* **File type: **There are more than one function in this object, this is for selecting function, select [Operating Record], when [User Permission] is enabled, the operation record of each user in HMI is recorded and displayedin the form of a table, and the time and date display format could be set as needed.

1057

* **Select line: **Set address for select row.

1058

1059

**Function (Timeout Alert)**

1060

1061

(% style="text-align:center" %)

1062

[[image:6.Objects_html_35cc911c850c1afb.gif||class="img-thumbnail"]]

1063

1064

* **File type:** There are more than one function in this object, this is for selecting function, select [Timeout], it displays the current HMI project communication timeout information. (The built-in screen has this special function; it will pop up automatically when timeout, users do not need to set).

1065

* **Select line: **Set address for select row.

1066

1067

**Function (Client Manage)**

1068

1069

(% style="text-align:center" %)

1070

[[image:6.Objects_html_9ec936a372bb7efb.gif||class="img-thumbnail"]]

1071

1072

* **File type: **There are more than one functions in this object, this is for selecting function, select [Client manage], it displays the current visitors' screens information.

1073

* **Select line:** Set address for select row.

1074

1075

**Function (User Manage)**

1076

1077

(% style="text-align:center" %)

1078

[[image:6.Objects_html_59dc786401ea6651.gif||class="img-thumbnail"]]

1079

1080

* **File type:** There are more than one functions in this object, this is for selecting function, select [User Manage],when [User Permission] is enabled, it displays all users' information.

1081

* **Select line: **Set address for select row.

1082

* **Refresh: **Set address for refresh users list; (bit address).

1083

1084

**Function (System Message)**

1085

1086

(% style="text-align:center" %)

1087

[[image:6.Objects_html_858d4ec965274b8a.gif||class="img-thumbnail"]]

1088

1089

* **File type: **There are more than one function in this object, this is for selecting function, select [System message], when event occurs, it displays prompt messages automatically.

1090

* **Select line: **Set address for select row.

**Address Control**

* **Start group: **Control displaying start from specified row, which means display from specified group.

1095

* For example, set 40

1096

** If 40=1, Start from first row (first group).

1097

** If 40=2, Start from second row (second group).

1098

** ...

1099

** If 40=10, Start from 10th row (10th group).

1100

* **Group number address: **Control the number of rows displayed;

1101

* For example, set 410

1102

** If 410=1, this object only displays 1 row (1 group).

1103

** If 410=2, this object displays 2 rows (2 groups).

1104

** ...

1105

** If 410=10, this object displays 10 rows (10 groups).

1106

* **Start address: **Control displaying start from specified column, which means display from specified member.

1107

* For example, set 420,

1108

** If 420=1, Start from first column (first member).

1109

** If 420=2, Start from second column (second member).

1110

** ...

1111

** If 420=10, Start from 10th column (10th member).

1112

* **Address number: **Control the number of columns displayed.

1113

* For example, set 430,

1114

** If 430=1, this object only displays 1 column (1 member).

1115

** If 430=2, this object displays 2 columns (2 members).

1116

** ...

1117

** If 430=10, this object displays 10 columns (10 members).

1118

* **Result**: When all configurations are completed, when the HMI is running, object will display like below.

**Recipe**

(% style="text-align:center" %)

1123

[[image:6.Objects_html_73ddff1c47ca6b37.gif||height="271" width="567" class="img-thumbnail"]]

**Operating Record**

(% style="text-align:center" %)

1128

[[image:6.Objects_html_6d72e0a32128f87a.gif||height="413" width="567" class="img-thumbnail"]]

**Client Manage**

(% style="text-align:center" %)

1133

[[image:6.Objects_html_ea2cd87aaa6600cd.gif||height="413" width="567" class="img-thumbnail"]]

1134

1135

(% class="wikigeneratedid" %)

1136

**✎Note:**

1137

1138

* If the file type is recipe file, modify the value of the address of "Select line" to control the selected line in the display list to the corresponding line. If another file type is selected, this address can only display the selected line (read-only mode).

1139

* For ie series and ig series HMI, "system message" and "timeout alert" will be displayed in the top pop-up window. The options of them will no longer be displayed in the record.

1140

* For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".

== **File list** ==

"File List" displays the recipe file name of the current project in the form of table in HMI. If there is no recipe file in the project, the table of the object is empty. (Table and trend chart objects currently only support Song Typeface, other fonts you set will not work.

1145

1146

Recipe files in "Flash", and also shows custom folder information.

1147

1148

**Function (Recipe File)**

1149

1150

(% style="text-align:center" %)

1151

[[image:文件列表 1.png||class="img-thumbnail"]]

1152

1153

(% style="text-align:center" %)

1154

[[image:6.Objects_html_66cd30b2b962a04e.gif||class="img-thumbnail"]]

1155

1156

* **File type: **[Recipe File] is for displaying recipe files in Flash.

1157

* **Folder name:** This is located to recipe function setting.

1158

* **Select line:** Select one line in list and display its line No. in this address.

1159

* For example, set 40,

1160

** if 40=1, the first row of object is selected.

1161

** If 40=2, the second row of object is selected.

1162

** ...

1163

** If 40=10, the 10th row of object is selected.

1164

1165

✎**Note: **When the file type is Recipe File, modify the address value to control the selected line of the list to jump to the corresponding line; for other file types, this address only has the effect of displaying line No.

1166

1167

* **Folder name address:** This is for setting recipe file name, in advance recipe mode.

1168

1169

**Function (Custom Folder)**

1170

1171

(% style="text-align:center" %)

1172

[[image:6.Objects_html_8cb7b2547b5e5c65.gif||class="img-thumbnail"]]

1173

1174

* **File type: **The object displays files under the specified path.

1175

* **Root:** It means storage; there are three options, "Flash", "Udisk" and "SDcard".

1176

* **Folder:** Set folder name, such as recipe.

1177

* **Select line: **Set address for select row.

1178

* For example, set 40,

1179

** if 40=1, the first row of object is selected.

1180

** If 40=2, the second row of object is selected.

1181

** ...

1182

** If 40=10, the 10th row of object is selected.

1183

* **Folder name address:** This is for setting recipe file name, in advance recipe mode;

1184

1185

**Use function address (20 words)**

1186

1187

(% style="text-align:center" %)

1188

[[image:6.Objects_html_dc49c7d7148792b3.gif||class="img-thumbnail"]]

1189

1190

Function address includes copy, paste, delete, and rename. And HMI automatically assigns the functions to bit addresses.

1191

1192

For example, if the function address is HDW 90, the detailed information is below.

1193

1194

(% class="table-bordered" %)

1195

|**Address**|**Address type**|**Object type**|**Function**

1196

|HDX90.0|Bit|(% colspan="1" rowspan="6" %)Bit switch (ON)|Copy selected files / all files

1197

|HDX90.1|Bit|Paste selected files/ all files

1198

|HDX90.2|Bit|Delete selected files/ all files

1199

|HDX90.3|Bit|Select all files

1200

|HDX90.4|Bit|Rename select files (Do not include suffix)

1201

|HDX90.5|Bit|Rename select files (Include suffix)

1202

1203

Using this function address can realize that copy a file of one file list to another file list. For example, the recipe file of flash (file list A) is copied to the recipe file of the U disk files in the file list (B), and the file name will be copied too. You could rename it with the "rename" address.

**Result**

When all configurations are completed, when the HMI is running, it displays object displays as shown below.

1208

1209

(% style="text-align:center" %)

1210

[[image:6.Objects_html_a68643b928e3930.gif||class="img-thumbnail"]]

1211

1212

(% class="wikigeneratedid" %)

1213

✎**Note: **For the details, please refer to "[[Recipe>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HRecipe]]".

== **XY plot** ==

It reads a continuous value of PLC register, converts the read value according to rhe specified data format, and display as XY trend chart on HMI.

1218

1219

(% style="text-align:center" %)

1220

[[image:XY 1.png||height="573" width="567" class="img-thumbnail"]]

**Source**

* **Auto Sample:** Select data from [XY plot] and displayed in a curve according to the set time.

1225

* **Trigger Sample: **When the trigger address is set, the data is collected and displayed in a curve. After the data is collected, the trigger address is automatically reset.

1226

1227

**Curve settings: **According needs to set style and color for each curve.

1228

1229

**Read address:** *for example, PLC word address is D, it points number is m. (point numbers no more than 800).

1230

1231

* Word address D is the X coordinate of the first point.

1232

* Word address D+1 is the Y coordinate of the first point.

1233

* Word address D+2 is the X coordinate of the second point.

1234

* Word address D+3 is the Y coordinate of the second point.

1235

* ......

1236

* Word address D+2m-1 is the X coordinate of the m^^th^^ point.

1237

* Word address D+2m is the Y coordinate of the m^^th^^ point.

1238

1239

Because if the number of XY points is m, it is necessary to continuously read 2m words from the address D of the PLC to draw a complete XY picture.

**Appearance**

(% style="text-align:center" %)

1244

[[image:XY 2.png||class="img-thumbnail"]]

1245

1246

* **X grids and Y grids:** The range is from 1 to 10.

1247

* **color setting:**

1248

** Background color 1 indicates the background color of appearrance.

1249

** Background color 2 indicates the background color of grid.

**Range**

(% style="text-align:center" %)

1254

[[image:XY 3.png||height="312" width="567" class="img-thumbnail"]]

1255

1256

* **Variable:** The data range for the graph could be set as a variable.

1257

* **X, Y Limit:** Set the max and min value of displaying curve.

**Result**

When all configurations are completed, when the HMI is running, it displays as shown below.

1262

1263

(% style="text-align:center" %)

1264

[[image:6.Objects_html_d86b49376aa4f4dd.gif||height="336" width="567" class="img-thumbnail"]]

1265

1266

(% class="wikigeneratedid" %)

1267

**Quick setting:** Fill in the starting address, according to the parameter settings, automatic allocation of addresses.

1268

1269

== **History XY plot** ==

1270

1271

The data in cache will display as continuous curve or separated points, each point in XY plot needs 2 addresses to set a point.

1272

1273

(% style="text-align:center" %)

1274

[[image:历史XY 1.png||class="img-thumbnail"]]

**Source**

* **Auto Sample:** Select data from [XY plot] and displayed in a curve according to the set time.

1279

* **Trigger Sample: **When the trigger address is set, the data is collected and displayed in a curve. After the data is collected, the trigger address is automatically reset.

1280

1281

**Curve settings: **According needs to set style and color for each curve.

1282

1283

* **Read address:** *for example, PLC word address is D, it points number is m. (point numbers no more than 800).

1284

** Word address D is the X coordinate of the first point.

1285

** Word address D+1 is the Y coordinate of the first point.

1286

** Word address D+2 is the X coordinate of the second point.

1287

** Word address D+3 is the Y coordinate of the second point.

1288

** ......

1289

** Word address D+2m-1 is the X coordinate of the m^^th^^ point.

1290

** Word address D+2m is the Y coordinate of the m^^th^^ point.

1291

1292

Because if the number of XY points is m, it is necessary to continuously read 2m words from the address D of the PLC to draw a complete XY picture.

**Appearance**

(% style="text-align:center" %)

1297

[[image:XY 2.png||class="img-thumbnail"]]

1298

1299

* **X grids and Y grids:** The range is from 1 to 10.

1300

* **color setting:**

1301

** Background color 1 indicates the background color of appearrance.

1302

** Background color 2 indicates the background color of grid.

**Range**

(% style="text-align:center" %)

1307

[[image:XY 3.png||height="312" width="567" class="img-thumbnail"]]

1308

1309

* **Variable:** The data range for the graph could be set as a variable.

1310

* **X, Y Limit:** Set the max and min value of displaying curve.

1311

1312

**Result**: When all configurations are completed, when the HMI is running, it displays as shown below.

1313

1314

(% style="text-align:center" %)

1315

[[image:6.Objects_html_d86b49376aa4f4dd.gif||height="336" width="567" class="img-thumbnail"]]

1316

1317

(% class="wikigeneratedid" %)

1318

✎**Note:** For the setting details, please refer to "[[History XY plot>>https://docs.we-con.com.cn/bin/view/PIStudio/08.Basic%20Function/#HHistoryXYplot]]".

1319

1320

== Disc record chart ==

1321

1322

The Disc Record displays the data from data source in the form of a disc curve.

1323

1324

**✎Note: **This function are only supported by HMI+, i series, ie series and ig series.

**Source**

(% style="text-align:center" %)

1329

[[image:6-2DiscRecord.png||class="img-thumbnail"]]

1330

1331

* **Source type**

1332

** **History**: Historical data can be queried.

1333

** **Real Time**: Only real-time data is displayed.

1334

* **Curve Buffer**

1335

** **History**: It is in data record area configured by data record. Multiple record groups could be configured, and each record group has multiple channels.

1336

** **Real Time**: It is in Real-time trend chart configured by data record. Multiple record groups could be configured, and each record group has multiple curve numbers.

1337

1338

**✎Note: **There must be one of settings (Data record and real-time trend chart) in configurations, otherwise there will be no data in curve buffer.

1339

1340

* **Curve No.**: The number of curves is the same as the number of channels in the record group. A maximum of 8 curves could be displayed. After selecting the curve to be displayed, it can set the scale range and scale color of each curve.

1341

* **Enable**: After selecting the corresponding curve number in the status bar and enabling the curve, set different curve styles and colors according to your needs, then select the channel number in the data buffer, and finally set the data range.

1342

* **Data Range: **Directly set the maximum and minimum values of the displayed graph. If the box "Variable Range" is checked, the set data is read from the filled address. The data format of the address is set as needed, and the length of the variable address is related to the set data format.

1343

* **Display Scale Value: **Display the value of disc record. The font color could be changed.

**Appearance**

(% style="text-align:center" %)

1348

[[image:6-3DiscRecordConfigAppearen.png||class="img-thumbnail"]]

1349

1350

1. **Circular Axis Scale**: Number of scale intervals in the direction of the circular axis. The range is 1 to 10.

1351

1. **Start Position**: The starting position to draw the curve: top, bottom, left, and right.

1352

1. **Rotary Axis Scale**: Number of scale intervals in the direction of the axis of rotation. The range is 4, 6, and 12.

1353

1. **Inner Circle Size**: Ratio of the inner circle to the outer circle.

1354

1. **Scale Style**: The way the scale is displayed, style 0 represents adaptive display, and style 1 represents forward display.

1355

1. **Background Color**: Appearance background color.

1356

1. **Inner Circle Color**: The inner circle color in the drawing area of the Disc.

1357

1. **Outer Circle Color**: The outer circle color in the drawing area of the Disc.

1358

1. **Grid Color**: Grid line color.

1359

1. **Scale Color**: Color of the time scale and tick marks.

1360

1. **Data Format & Time Format**: Configure the display mode of the time and date as required, where NONE means no display. It is forbidden to set both the time and date display to NONE, and when the date is set to NONE, the day parameter can be set in the time.

1361

1. **Enable Font**: Use the set font library and font size for display. When this font is not enabled, the default built-in font is used for display.

1362

1. **Enable Point**: Set to enable point, the data unit of each curve will be highlighted as a point.

**Function**

(% style="text-align:center" %)

1367

[[image:6-4DiscRecordConfigFuncAddr.png||class="img-thumbnail"]]

1368

1369

**Function start Address**: Open the sub-screen of the data record query, and the system can automatically allocate the object address of the query screen according to the configured address. When using this component, it will automatically generate buttons for four direction, you can use these four control keys to view the data record display, and automatically create a new sub-screen based on the function start address, the content of the sub-screen is the query setting for span and start time.

1370

When two objects use one function screen at the same time, if the function addresses of the two object are the same, changing the built-in screen will affect the operation of the two display object at the same time. If the function addresses of the two objects are different, the second object with the built-in screen can be displayed normally, and the first object will be displayed abnormally.

1371

1372

**✎Note: ** When copying Data record display, it is recommended to create a new "function screen" to avoid repeated calls that may cause abnormal functions.

1373

1374

**Start time**: Set the start time and conditions for data viewing.

1375

1376

For the description of the start address of the function, please refer to [[Common settings in chart objects>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HCommonsettingsinchartobjects]].

1377

1378

For the setting, please refer to [[8.3 Data Record>>http://docs.we-con.com.cn/wiki/pistudio/view/Helps/08.Basic%20Function/#H8.3DataRecord]].

= **Meter** =

(% style="text-align:center" %)

1384

[[image:6.Objects_html_b3789f59e920334.gif||class="img-thumbnail"]]

1385

1386

== **Pointer meter** ==

1387

1388

The meter responds to change in the value of the indicated word address by means of a dial and a pointer. The meter looks very similar to the actual meter.

1389

1390

(% style="text-align:center" %)

1391

[[image:image-20220805161001-1.jpeg]]

1392

1393

**Read address:** Read the value from the set PLC address.

1394

1395

**Data format:** It is for data setting. The data format types are as below.

* BCD, 32-bit float

* signed decimal

* unsigned decimal

* 32-bit signed decimal

1401

* 32-bit unsigned decimal

1402

1403

**Digits setting:** Set directly the maximum and the minimum. Only when the floating point number is selected, can the maximum and minimum value be with a decimal point, and other data formats can't be with a decimal point. If the value is read by the address, then select "variable limits", and fill in the address.

1404

1405

* **Min angle and max angle:** Data range, if data beyond range will be not inputted.

1406

1407

**Variable limits:** When checked, low limit address and high limit address could be edit showed below;

1408

1409

**Show meter background**: This is for setting meter background. When not checked, the background color is transparent; When checked, there are four styles of pointer meter to select according to needs.

1410

1411

**Show pointer**: When not checked, the pointer is not displayed; When checked, you could set the style and color of pointer.

1412

1413

**Show alarm area**: It provides alarm function in meter, you could set the 4 areas, and each area corresponds to a different alarm color.

1414

1415

**Show scale**: Display the scale on the object to observe the value. You need to set major scale, minor scale and scale value.

1416

1417

**Meter Type:** It sets the angle between the maximum and minimum value. It provides 7 kinds of styles, they are 180°, 210°, 240°, 270°, 300°, 330° and 360°.

1418

1419

**Start angle: **It sets the position where the minimum value is displayed.

1420

1421

**Position&size:** Set the position of the object on the screen and the size of the object. The object is displayed as square. If the width or the height of the object is changed, the other data will also be changed.

**Result**

When configuration is completed, the object is shown below picture when HMI is running.

1426

1427

(% style="text-align:center" %)

1428

[[image:6.Objects_html_1b8e24a5065cf96a.gif||class="img-thumbnail"]]

1429

1430

1431

(% class="box infomessage" %)

1432

(((

1433

✎**Note:** For the parameter setting, please refer to "[[text>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HText]]" in "[[Bit Switch>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

)))

== **Bar** ==

The bar graph shows the numerical change of the word address by means of bar graph.

**Description**

(% style="text-align:center" %)

1443

[[image:6.Objects_html_bd38676c1a9565f9.gif||class="img-thumbnail"]]

**(1) Data setting**

1. **Read address: **Read the value from the set PLC address.

1448

1. **Dual Value Display:** Set two read addresses. The bar graph will show the value segment between the two read addresses.

1449

1. **Data format: **It is for setting data format from read address.

1450

1. **Digits setting:** It means the decimal point position. The decimal point position is effective only when data format is floating and decimal.

1451

1452

**(2) Display settings**

1453

1454

1. **Type:** It is for setting bar display type, it provides two types.

1455

1456

* Type1: Single scale display.

1457

* Type2: Double scales display.

1458

1459

(% start="2" %)

1460

1. **Bar direction: **horizontal display or vertical display.

1461

1. **Back color: **User could freely set the color when check it.

1462

1. **Text color: **Display color of the scale value.

1463

1464

**(3) Alarm settings**

1465

1466

It provides alarm function in meter, users could set alarm range, users could set the 4 ranges. And each range corresponds to a different alarm color.

**(4) Show scale**

It provides settings for scale on meter, users could select [Major scale] and [Minor scale], and set color for them.

**Result**

(% style="text-align:center" %)

1475

[[image:6.Objects_html_4d9066ded0b72b33.gif||class="img-thumbnail"]]

1476

1477

When configuration is completed, the object shows as above picture, when HMI is running.

== **Clock** ==

This object displays HMI system time.

**Description**

(% style="text-align:center" %)

1487

[[image:6.Objects_html_f8df8c51c201879a.gif||class="img-thumbnail"]]

1488

1489

1. **Back type: **It is for clock dial style settings; it provides three types.

1490

1. **Back color:** It is for setting color for clock dial, it is invalid when back type is 1.

1491

1. **Hand type:** It is for clock hand style settings; it provides three types.

1492

1. **Hand color: **It is for setting color for hand.

1493

1. **Show second hand:** Check it to display second hand in clock.

1494

1. **Second hand color: **It is for setting color for second hand.

**Result**

As soon as configuration is completed, the object is shows as below picture, during HMI is running.

1499

1500

(% style="text-align:center" %)

1501

[[image:6.Objects_html_23abf6f7aa26bd8f.gif||class="img-thumbnail"]]

== **Runbar** ==

Run bar object could displays normal text and alarm text. User could select display content according to requirement.

1506

1507

When the alarm text is displayed, it could quickly and timely reflect the status of the current HMI alarm function for easy management and control.

1508

1509

When normal text is displayed, it provides two ways to set the display content to user (static text and dynamic text);

**Description**

(% style="text-align:center" %)

1514

[[image:6.Objects_html_f0579e391675b855.gif||class="img-thumbnail"]]

1515

1516

**(1) Basic settings**

1517

1518

1. **Type:** It is for displaying content settings.

1519

1520

* Move Text: Normal text.

* Alarm: Alarm text.

(% start="2" %)

1. **Transparence: **It sets the transparency of the object background.

1525

1. **Reverse: **it sets text move right to left or left to right.

1526

1. **Speed:** It sets text moving speed.

1527

1. **Background:** It sets object background color.

1528

1. **Text color:** It sets text color.

1529

1. **Show Border:** Check it to show border for object.

1530

1. **Border:** It sets object border color; it is visible only when [Show Border] is checked.

1531

1532

**(2) Display content settings**

1533

1534

* If it shows static text, please set content in "[[text>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HText]]".

1535

* If it shows dynamic text, please check [Read Address], and set address and length for it.

1536

* If it shows alarm text, please select alarm information, such as time and date, alarm group number range.

**(3) Preview**

It is for preview text content in object.

**Result**

When configuration is completed, the object is shows as below picture, when HMI is running.

1. **Normal text**

(% style="text-align:center" %)

1549

[[image:6.Objects_html_e8d384899180ce2f.gif||class="img-thumbnail"]]

(% start="2" %)

1. **Alarm text**

(% style="text-align:center" %)

1555

[[image:6.Objects_html_9612d7685f349400.gif||class="img-thumbnail"]]

1556

1557

✎**Note:** For the "Text" setting, please refer to "[[text>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fview%2FHelps%2F06.Objects%2F%23HText]]" in "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".

= **Display** =

(% style="text-align:center" %)

1562

[[image:6.Objects_html_826a565200b1aa33.gif||class="img-thumbnail"]]

1563

1564

== **Indirect window** ==

1565

1566

Indirect window is used for displaying sub-screen in HMI project. You could control it to display different sub-screens by changing the value of read address.

**Description**

(% style="text-align:center" %)

1572

[[image:6.Objects_html_ccb5a66acd5aed37.gif||class="img-thumbnail"]]

**(1) Screen No.**

There are two modes for sub-screen display, one is static screen, and the other is dynamic screen, and switch screen by change read address value. User could only choose one of the two modes.

1577

1578

1. **Indirect scree No.:** It is for setting read address to switch sub-screen.

1579

1. **Screen No.:** Check it to enable static screen mode, and select screen for object.

1580

1581

**(2) Control display by address**

1582

1583

Control display of the indirect object through bit address.

* Set ON: Display.

* Set OFF: Hide.

**(3) Position**

It is for setting the position of sub-screen, the value is for coordinates of the top left point of it.

**(4) Size**

It is for setting the size of sub-screen.

**Result**

When configuration is completed as below, sub screen will be displayed as picture show.

1599

1600

1. Display static sub-screen.

1601

1. Use HDX0.0 to control display or hide.

1602

1603

(% style="text-align:center" %)

1604

[[image:6.Objects_html_6350c158e88cd0dd.gif||class="img-thumbnail"]]

== **QR Code** ==

It is similar to the universal QR code. You could scan this object to get the connection or content, but it provides content settings for QR code.

**Description**

(% style="text-align:center" %)

1613

[[image:6.Objects_html_4cf155075ac97d16.gif||class="img-thumbnail"]]

**(1) QR Set**

1. **Variable QR:** It is for setting read address, the content of QR code is from this setting address.

1618

1. **QR String: **It is for set static content for QR code.

**✎Note:**

* HMI machine ID address: HSW10494 ~~ HSW10558.

1623

* So if user want to use QR code to display machine ID on project screen, please check "Variable QR", and set address is HSW10494.

1624

* When scanning the QR code by APP to monitor HMI, the default access password is 888888.

== **Picture** ==

Picture object is for displaying picture in HMI screen. After the picture is imported, the software will automatically convert the color depth of the picture to the picture matching the HMI.

**Description**

(% style="text-align:center" %)

1633

[[image:6.Objects_html_f11b82f18617ca5d.gif||class="img-thumbnail"]]

**(1) Shape**

1. **Shape: **Click shape to open the Shape Library for shape selection.

1638

1. **Default shape: **Every object has its own default shape, click it will back to default.

1639

1. **Discard:** Click it, object will display without shape.

**(2) Set Color**

This is for set object color basic on shape, not all shape supports change color.

1644

1645

**(3) Picture display function**

1646

1647

This is advanced function of picture object; user can change display picture when HMI is running. The supported formats are bmp, jpg, png, jpeg. This feature is unavailable for offline and online simulation.

1648

1649

1. **Root: **Set the save location of the picture, which can be set to U disk,SD card,but could not be set to Flash.

1650

1. **Folder: **Set the name of the folder where the picture is located.The folder name can be up to 31 characters. （Note：The picture must be stored in the U disk folder and cannot be stored in the root directory of the U disk.）

1651

1. **File address: **16 consecutive addresses enter a picture name in the address (need to be the full name of the suffix), if the picture exists, the picture content is displayed; otherwise the default picture is displayed.

✎**Note:**

1. The image could be displayed in BMP, JPG, PNG, and JPEG formats. Images with a resolution of 1920 x 1080 or higher are not supported.

1656

1. For the setting of [[animations>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HAnimation]], see the "[[Bit Switch>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HBitswitch]]".

1657

1658

== **Rotation picture** ==

1659

1660

Rotation picture can rotate the image at a specified center or rotate it in a certain way. It is determined by the property settings.

1661

1662

(% style="text-align:center" %)

1663

[[image:image-20220805155253-1.jpeg]]

1664

1665

1666

**Position: **Display the position of the rotation picture in the screen.

1667

1668

**Counter-Clockwise: **It sets the rotation direction of the picture. The default is to rotate clockwise. When checked, the rotation direction is counterclockwise.

1669

1670

**Appearance**: It sets picture for object, the picture is selected from Shape.

**Data format**

* **Data format: **It sets data format for [Address]->[Rotation angle].

1675

** BCD

1676

** 32-bit float

1677

** 16-bit signed decimal

1678

** 16-bit unsigned decimal

1679

** 32-bit signed decimal

1680

** 32-bit unsigned decimal

1681

* **Min. angle:** It sets the starting angle of rotation (Valid in auto-rotation mode).

1682

* **Max. angle:** It sets the ending angle of rotation (Valid in auto-rotation mode).

1683

1684

**Rotation angle: **The rotating angle is determined by designated address;

1685

1686

**Rotation center**: It shows the rotation center coordinates;

1687

1688

**Auto-rotation: **Taker the center of the image as the center of the picture when it is rotating.

1689

1690

**Cycle time: **Object will rotate every cycle time. Unit:100 ms.

1691

1692

**Rotation angle:** Object rotates designated angle everytime.

1693

1694

**Return:** Object will be reset to original position after maximum angle reached.

1695

1696

**Enable auto-spin: **When the address is set to ON, the picture will rotate automatically.

1697

1698

**Hide:** Control the hiding status of the object through the status of the control bit address. The hiding mode can be divided into hide when OFF and hide when ON.

1699

1700

== **Drop-down List** ==

1701

1702

Drop-Down list is designed for display the designated state by text, to select the text in the list, the corresponding state will change, and the write address will change to the designated state value.

1703

1704

The drop-down list could write word address, and the value range is 0 to 31. The corresponding value can be displayed by text in the object. Click the drop-down box on the right of the object to list all the status text, and the drop-down box will be automatically withdrawn after setting.

**(1) General**

(% style="text-align:center" %)

1709

[[image:6.Objects_html_1f4c0383a61f9502.gif||class="img-thumbnail"]]

**1) Edit**

1. **Read Address:** The data from designated address will be displayed.

1714

1. **Same read-write address:** Configure "Write Address" as the same as "Read Address".

1715

1. **Write Address: **Write data to designated address. The address can be different from "Read Address".

**2) Format**

Set data format for object, it provides 16-bit unsigned decimal,16-bit BCD, 16-bit unsigned decimal, 32-bit BCD, 32-bit unsigned decimal, and 32-bit unsigned decimal.

**3) State count**

It could set the total number to display in the drop-list and supports up to 128 states (1 to 128). The default value of state is corresponding to the number of states. (State 1 corresponding to value 1). You can also click "state values" to set it according to your needs.

1724

1725

**State value: **User can set different values to correspond to different states, the setting window as below figure shows.

1726

1727

(% style="text-align:center" %)

1728

[[image:6.Objects_html_da9a6696f320b427.gif||class="img-thumbnail"]]

**For example**

By default, when value of read address is 0, object displays state 0.

1733

1734

If change settings as below figure shows.

1735

1736

When value of read address is 11, object displays state 1.

**4) Advance**

It provides two types for this object.

1741

1742

1. **Normal Type:** It makes object as normal drop-down list object.

1743

1. **User name:** it is for user login permissions. User name and group name in user permissions are mainly displayed.

1744

1745

**(2) Text settings**

1746

1747

Every state requires text, the settings as below description, the normal settings please refer to [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__common setting__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCommonsettings]](%%). This section will show special settings for it.

1748

1749

(% style="text-align:center" %)

1750

[[image:6.Objects_html_f35e2c650b2a4b90.gif||class="img-thumbnail"]]

1751

1752

(% style="text-align:center" %)

1753

[[image:6.Objects_html_192dddeede2c5d56.gif||class="img-thumbnail"]]

**1) Centre**

Check it to make the text centered;

1758

1759

**2) Enable states text control**

1760

1761

You can dynamically modify the text content in different states. When this feature is enabled, the text for each state set in the normal mode is invalid.

1762

1763

1. **Current state: **It is for setting state number for modification. For example, if the value is 3, it means that the text information in state 3 will be modified.

1764

1. **Text address: **This address is used for the operation of the text component and is used to input the content displayed in the state. The length of the text is the number of text characters that can be entered, ranging from 1-127 characters.

1765

1. **Trigger set text: **This address is used for saving modification.

1766

1767

**3) Read state text from address**

1768

1769

1. **Text start address: **The first address of occupied multiple consecutive addresses. Address length: [Text length/2] *[state number +1].

1770

1771

* For example: 10 states, the address length= (10/2) *(10+1) =55. It set HDW100 as start address, so the HDW100-HDW104 stores the currently selected text content, the HDW105-HDW109 displays the text in the first state, the HDW110-HDW114 displays the second, and so on.

1772

1773

(% start="2" %)

1774

1. **Refresh: **The drop-down list status value is updated according to the text address content. The drop-down list is not updated immediately, when the data in the text address change is completed, only the refresh is triggered, it will update.

1775

1776

== **Camera display** ==

1777

1778

Video display is advanced function in PI HMI, this object displays the camera screen in HMI, there are two modes, one is IP camera, and the other is USB camera. But IP camera requires settings in [Project settings], the detailed information, please refer to ~[[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)__Camera__>>https://docs.we-con.com.cn/bin/view/PIStudio/06.Objects/#HCameradisplay]](%%)].

**✎Note:**

This function requires special HMI model, the detailed information, please contact sales.

1783

1784

=== **IP Camera** ===

**(1) General**

(% style="text-align:center" %)

1789

[[image:6.Objects_html_2bc22bd50bf65eb.gif||class="img-thumbnail"]]

**(1) Mode select**

It is used for selecting modes; each mode uses different settings.

1794

1795

**(2) Use dynamic control instruction**

1796

1797

Read a string from designated system address, and then combine the instruction to control the camera image.

1798

1799

When the dynamic control command is disabled, the complete camera control command need to be entered in order to display the camera contents.

1800

1801

**(3) Camera control instruction**

1802

1803

This is for entering static instruction for camera, so that users can operation camera when HMI running;

1804

1805

**(4) Enable rtsp camera**

1806

1807

This is another way to control camera, check it and set the function address.

1808

1809

**Camera Display usage method**

1810

1811

（1）Usage 1: Suitable for users know camera account, password and device serial number.

1812

1813

Add the camera display object, select Net Camera, and enable rtsp camera and configured with a functional address, the followings use HDW0 as as example:

1814

1815

(% style="text-align:center" %)

1816

[[image:企业微信截图_16730778441159.png]]

1817

1818

|=(% scope="row" %)(((

1819

**Register**

1820

)))|=(% colspan="2" style="width: 662px;" %)(((

1821

Function

1822

)))|=(% style="width: 168px;" %)(((

**Length**

)))

|=(((

HDW0

)))|(% colspan="2" style="width:662px" %)(((

1828

User name

1829

)))|(% style="width:168px" %)(((

20 words

)))

|=(((

HDW20

)))|(% colspan="2" style="width:662px" %)(((

1835

Password

1836

)))|(% style="width:168px" %)20 words

1837

|=(((

1838

HDW40

1839

)))|(% colspan="2" style="width:662px" %)(((

1840

Alias

1841

)))|(% style="width:168px" %)20 words

1842

|=(((

1843

HDW60

1844

)))|(% colspan="2" style="width:662px" %)(((

1845

Device Serial Number

1846

)))|(% style="width:168px" %)43 words

1847

|=(((

1848

HDW103

1849

)))|(% colspan="2" style="width:662px" %)(((

1850

Camera ID

1851

)))|(% style="width:168px" %)(((

1852

1 word

1853

)))

1854

|=(% rowspan="11" %)(((

1855

HDW104

1856

)))|(% colspan="2" style="width:662px" %)(((

1857

Camera control

1858

)))|(% rowspan="11" style="width:168px" %)(((

1 word

)))

|(((

HDX104.0

)))|(% style="width:448px" %)(((

1864

Open Camera

1865

)))

1866

|HDX104.1|(% style="width:448px" %)(((

1867

Close Camera

1868

)))

1869

|HDX104.2|(% style="width:448px" %)(((

1870

Camera up

1871

)))

1872

|HDX104.3|(% style="width:448px" %)(((

1873

Camera down

1874

)))

1875

|HDX104.4|(% style="width:448px" %)(((

1876

Camera left

1877

)))

1878

|HDX104.5|(% style="width:448px" %)(((

1879

Camera right

1880

)))

1881

|HDX104.6|(% style="width:448px" %)(((

1882

Screenshots

1883

)))

1884

|HDX104.7|(% style="width:448px" %)(((

1885

Binding camera

1886

)))

1887

|HDX104.8|(% style="width:448px" %)(((

1888

Set alias

1889

)))

1890

|HDX104.9|(% style="width:448px" %)(((

Camera stops moving

)))

|=(((

HDW105

)))|(% colspan="2" style="width:662px" %)(((

1896

Camera Status

1897

1898

~=0：Camera disconnected；

1899

1900

~=1：Camera connected properly；

1901

1902

~=2：Camera is being connected.

1903

)))|(% style="width:168px" %)(((

1 word

)))

|=(((

HDW106

)))|(% colspan="2" style="width:662px" %)(((

1909

Screenshot save location：

1910

1911

~=0：Screenshot save in Flash/IPCameraScreenShot；

1912

1913

~=1：Screenshot save in U Disk/IPCameraScreenShot；

1914

1915

~=2：Screenshot save in SDCard/IPCameraScreenShot.

1916

)))|(% style="width:168px" %)(((

1 word

)))

* (((

Fill in the camera ID with the camera serial number queried by "Camera Search Module", trigger the binding address, and fill in the camera information (user name, password, device serial number, etc.) of the ID into the corresponding function address.

1922

)))

1923

* (((

1924

If the "Camera Search Module" is not enabled, you need to enter the camera information manually: user name, password, device serial number (S/N), which can be obtained from the label on the camera body.

1925

)))

1926

1927

(% style="text-align:center" %)

[[image:图片1.png]]

* (((

Trigger the "Open Camera" address to view the surveillance screen of the camera.

1933

)))

1934

1935

If the camera is successfully opened, you can set the alias of the camera, control the up/down/left/right movement of the camera (provided that the camera supports up/down/left/right control), and take screenshots.

1936

1937

If the camera is off, you can't set alias, camera rotation, screenshot, etc.

1938

1939

(2) Usage 2: Suitable for users know the camera account, password and camera IP

1940

1941

After enabling the rtsp camera and configuring the function address, additionally check Default configuration option, the configuration method and the function can address as follows.

1942

1943

(% style="text-align:center" %)

1944

[[image:JqIamFyDzE.png]]

1945

1946

(% style="text-align:center" %)

1947

[[image:企业微信截图_16730803592289.png]]

1948

1949

|=(% scope="row" %)(((

1950

**Register**

1951

)))|=(% colspan="2" style="width: 662px;" %)(((

1952

Function

1953

)))|=(% style="width: 168px;" %)(((

**Length**

)))

|=(((

HDW0

)))|(% colspan="2" style="width:662px" %)(((

1959

User name

1960

)))|(% style="width:168px" %)(((

20 words

)))

|=(((

HDW20

)))|(% colspan="2" style="width:662px" %)(((

1966

Password

1967

)))|(% style="width:168px" %)20 words

1968

|=(((

1969

HDW40

1970

)))|(% colspan="2" style="width:662px" %)(((

1971

IP

1972

)))|(% style="width:168px" %)(((

8 words

)))

|=(((

HDW48

)))|(% colspan="2" style="width:662px" %)(((

1978

Port

1979

)))|(% style="width:168px" %)(((

1980

1 word

1981

)))

1982

|=(% rowspan="10" %)(((

HDW49

)))|(((

HDX49.0

)))|(% style="width:448px" %)(((

1987

Open Camera

1988

)))|(% rowspan="10" style="width:168px" %)(((

1 word

)))

|(((

HDX49.1

)))|(% style="width:448px" %)(((

Close Camera

)))

|(((

HDX49.2

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.3

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.4

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.5

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.6

)))|(% style="width:448px" %)(((

Screenshots

)))

|(((

HDX49.7

)))|(% style="width:448px" %)

2024

|(((

2025

HDX49.8

2026

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.9

)))|(% style="width:448px" %)(((

)))

|=(((

HDW50

)))|(% colspan="2" style="width:662px" %)(((

2037

Camera Status

2038

2039

~=0：Camera disconnected；

2040

2041

~=1：Camera connected properly；

2042

2043

~=2：Camera is being connected.

2044

)))|(% style="width:168px" %)(((

1 word

)))

|=(((

HDW51

)))|(% colspan="2" style="width:662px" %)(((

2050

Screenshot save location：

2051

2052

~=0：Screenshot save in Flash/IPCameraScreenShot；

2053

2054

~=1：Screenshot save in U Disk/IPCameraScreenShot；

2055

2056

~=2：Screenshot save in SDCard/IPCameraScreenShot.

2057

)))|(% style="width:168px" %)(((

1 word

)))

* (((

If you have set the default settings, directly trigger the function address to trigger the opening of the camera.

2063

)))

2064

* (((

2065

The camera configured via ip only supports, turn on, turn off, screenshot basic functions.

2066

)))

2067

2068

（3）Usage 3: Suitable for users know the address of rtsp stream play.

2069

2070

After enabling the rtsp camera and configuring the function address, additional check URL configuration option, configuration method and function can address as follows.

2071

2072

(% style="text-align:center" %)

2073

[[image:qi1abBsfln.png]]

2074

2075

(% style="text-align:center" %)

2076

[[image:EwAePzRgIB.png]]

2077

2078

|=(% scope="row" %)(((

2079

**Register**

2080

)))|=(% colspan="2" style="width: 662px;" %)(((

2081

Function

2082

)))|=(% style="width: 168px;" %)(((

**Length**

)))

|=(((

HDW0

)))|(% colspan="2" style="width:662px" %)(((

2088

User name

2089

)))|(% style="width:168px" %)(((

20 words

)))

|=(((

HDW20

)))|(% colspan="2" style="width:662px" %)(((

2095

Password

2096

)))|(% style="width:168px" %)20 words

2097

|=(((

2098

HDW40

2099

)))|(% colspan="2" style="width:662px" %)(((

2100

IP

2101

)))|(% style="width:168px" %)(((

8 words

)))

|=(((

HDW48

)))|(% colspan="2" style="width:662px" %)(((

2107

Port

2108

)))|(% style="width:168px" %)(((

2109

1 word

2110

)))

2111

|=(% rowspan="10" %)(((

HDW49

)))|(((

HDX49.0

)))|(% style="width:448px" %)(((

2116

Open Camera

2117

)))|(% rowspan="10" style="width:168px" %)(((

1 word

)))

|(((

HDX49.1

)))|(% style="width:448px" %)(((

Close Camera

)))

|(((

HDX49.2

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.3

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.4

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.5

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.6

)))|(% style="width:448px" %)(((

Screenshots

)))

|(((

HDX49.7

)))|(% style="width:448px" %)

2153

|(((

2154

HDX49.8

2155

)))|(% style="width:448px" %)(((

)))

|(((

HDX49.9

)))|(% style="width:448px" %)(((

)))

|=(((

HDW50

)))|(% colspan="2" style="width:662px" %)(((

2166

Camera Status

2167

2168

~=0：Camera disconnected；

2169

2170

~=1：Camera connected properly；

2171

2172

~=2：Camera is being connected.

2173

)))|(% style="width:168px" %)(((

1 word

)))

|=(((

HDW51

)))|(% colspan="2" style="width:662px" %)(((

2179

Screenshot save location：

2180

2181

~=0：Screenshot save in Flash/IPCameraScreenShot；

2182

2183

~=1：Screenshot save in U Disk/IPCameraScreenShot；

2184

2185

~=2：Screenshot save in SDCard/IPCameraScreenShot.

2186

)))|(% style="width:168px" %)(((

1 word

)))

* (((

If you have set the default settings, directly trigger the function address to trigger the opening of the camera.

2192

)))

2193

* (((

2194

The camera configured via ip only supports, turn on, turn off, screenshot basic functions.

2195

)))

2196

2197

**EZVIZ Cloud Description**

2198

2199

(% style="text-align:center" %)

2200

[[image:企业微信截图_1673081149790.png]]

2201

2202

(% style="text-align:center" %)

2203

[[image:企业微信截图_1673081156755.png]]

2204

2205

(% class="wikigeneratedid" %)

2206

The function address will occupy the 125 word address, the following table is using the HDW6000 as a example:

2207

2208

(% style="width:892px" %)

2209

|=(% scope="row" style="width: 208px;" %)Register|=(% style="width: 308px;" %)Description|=(% style="width: 132px;" %)Length|=(% style="width: 241px;" %)Data Format

2210

|=(% style="width: 208px;" %)HDW6000|(% style="width:308px" %)AppKey of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String

2211

|=(% style="width: 208px;" %)HDW6020|(% style="width:308px" %)AppSecret of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String

2212

|=(% style="width: 208px;" %)HDW6040|(% style="width:308px" %)Device S/N of EZVIZ Cloud|(% style="width:132px" %)43 Words|(% style="width:241px" %)String

2213

|=(% style="width: 208px;" %)HDW6083|(% style="width:308px" %)Channel number of EZVIZ Cloud|(% style="width:132px" %)1 Word|(% style="width:241px" %)16bit Unsigned

2214

|=(% style="width: 208px;" %)HDW6084|(% style="width:308px" %)Device IP of EZVIZ Cloud|(% style="width:132px" %)16 Words|(% style="width:241px" %)String

2215

|=(% style="width: 208px;" %)HDW6100|(% style="width:308px" %)RTSP Port of EZVIZ Cloud|(% style="width:132px" %)1 Word|(% style="width:241px" %)16bit Unsigned

2216

|=(% style="width: 208px;" %)HDW6101|(% style="width:308px" %)Verification code of EZVIZ Cloud|(% style="width:132px" %)20 Words|(% style="width:241px" %)String

2217

|=(% style="width: 208px;" %)HDX6121.1|(% style="width:308px" %)(((

2218

Confirmation of binding EZVIZ camera

2219

2220

(=1, Confirm; =Others value, Unconfirm)

2221

)))|(% style="width:132px" %)1 Bit|(% style="width:241px" %)Bit

2222

|=(% style="width: 208px;" %)HDW6122|(% style="width:308px" %)Device function control |(% style="width:132px" %)1 Word|(% style="width:241px" %)16bit Unsigned

2223

|=(% style="width: 208px;" %)HDW6123|(% style="width:308px" %)(((

2224

Device status

2225

2226

(=0, Close; =1, Open)

2227

)))|(% style="width:132px" %)1 Word|(% style="width:241px" %)16bit Unsigned

2228

|=(% style="width: 208px;" %)HDW6124|(% style="width:308px" %)Result code of function control(HDW6122)|(% style="width:132px" %)2 Words|(% style="width:241px" %)32bit Signed

2229

2230

When the function control HDW6122 set to different value, it will trigger different function. After triggered, the HDW6122 will be reset to 0. The specific introduction like follows:

2231

2232

|=(% scope="row" style="width: 450px;" %)Register Value|=(% style="width: 564px;" %)Function Description

2233

|=(% style="width: 450px;" %)1|(% style="width:564px" %)Open camera

2234

|=(% style="width: 450px;" %)2|(% style="width:564px" %)Close camera

2235

|=(% style="width: 450px;" %)3|(% style="width:564px" %)Move up

2236

|=(% style="width: 450px;" %)4|(% style="width:564px" %)Move down

2237

|=(% style="width: 450px;" %)5|(% style="width:564px" %)Move left

2238

|=(% style="width: 450px;" %)6|(% style="width:564px" %)Move right

2239

|=(% style="width: 450px;" %)7|(% style="width:564px" %)Move upper left

2240

|=(% style="width: 450px;" %)8|(% style="width:564px" %)Move lower left

2241

|=(% style="width: 450px;" %)9|(% style="width:564px" %)Move upper right

2242

|=(% style="width: 450px;" %)10|(% style="width:564px" %)Move lower right

2243

|=(% style="width: 450px;" %)11|(% style="width:564px" %)Zoom in

2244

|=(% style="width: 450px;" %)12|(% style="width:564px" %)Zoom out

2245

|=(% style="width: 450px;" %)13|(% style="width:564px" %)Short focal length

2246

|=(% style="width: 450px;" %)14|(% style="width:564px" %)Long focal length

2247

|=(% style="width: 450px;" %)15|(% style="width:564px" %)HD clarity

2248

|=(% style="width: 450px;" %)16|(% style="width:564px" %)Smooth clarity

2249

|=(% style="width: 450px;" %)17|(% style="width:564px" %)Stop control

2250

2251

The result code of function control will be displayed in HDW6124, the specific code as following table shows:

2252

2253

(% style="width:1029px" %)

2254

|=(% scope="row" style="width: 129px;" %)Result Code|=(% style="width: 366px;" %)Description|=(% style="width: 531px;" %)Remark

2255

|=(% style="width: 129px;" %)-1|(% style="width:366px" %)Operation failed|(% style="width:531px" %)Other reason(For example network error, device configuration error, etc.)

2256

|=(% style="width: 129px;" %)-1001|(% style="width:366px" %)Internal error|(% style="width:531px" %)Suggest to retry

2257

|=(% style="width: 129px;" %)-1002|(% style="width:366px" %)Camera search: Request parameter is empty|(% style="width:531px" %)Confirm the account and password whether correct or not

2258

|=(% style="width: 129px;" %)-1003|(% style="width:366px" %)Camera search: Search failed|(% style="width:531px" %)Confirm the device ethernet whether connect normal

2259

|=(% style="width: 129px;" %)-1004|(% style="width:366px" %)Camera binding failed: Invalid camera ID|(% style="width:531px" %)Confirm the camera ID whether is in the valid range

2260

|=(% style="width: 129px;" %)-1005|(% style="width:366px" %)Camera opening failed: Cannot match the corresponding camera|(% style="width:531px" %)Confirm the account, password and S/N whether correct or not

2261

|=(% style="width: 129px;" %)-1006|(% style="width:366px" %)Camera opening failed: Cannot adapt minimum resolution|(% style="width:531px" %)Confirm the camera supports ONVIF protocol or not

2262

|=(% style="width: 129px;" %)-1007|(% style="width:366px" %)Camera opening failed: Cannot get the rtsp stream address|(% style="width:531px" %)Confirm the camera supports ONVIF protocol or not

2263

|=(% style="width: 129px;" %)-1008|(% style="width:366px" %)Camera opening failed: Cannot adapt the camera parameters|(% style="width:531px" %)Confirm the camera supports ONVIF protocol or not

2264

|=(% style="width: 129px;" %)-1009|(% style="width:366px" %)Camera opening failed: Open video stream failed|(% style="width:531px" %)Confirm the camera whether is on running status, or whether open the camera too frequently

2265

|=(% style="width: 129px;" %)-1010|(% style="width:366px" %)Camera closing failed: Camera on the closed status|(% style="width:531px" %)Confirm the camera whether is on running status or not

2266

|=(% style="width: 129px;" %)-1011|(% style="width:366px" %)Camera closing failed: Camera on the closed status|(% style="width:531px" %)Confirm the camera whether is on running status or not

2267

|=(% style="width: 129px;" %)-1012|(% style="width:366px" %)Screenshot failed: Camera not opened|(% style="width:531px" %)Confirm the camera whether is on running status or not

2268

|=(% style="width: 129px;" %)-1013|(% style="width:366px" %)Screenshot failed: Execution error occurred|(% style="width:531px" %)Confirm the camera whether is on normal running status or not

2269

|=(% style="width: 129px;" %)-1014|(% style="width:366px" %)Alias setting failed: Cannot match the corresponding camera|(% style="width:531px" %)Confirm the S/N whether correct or camera whether is on running status

2270

|=(% style="width: 129px;" %)-1015|(% style="width:366px" %)Pan-tilt controlling failed: Camera on the closed status|(% style="width:531px" %)Confirm the camera whether is on normal running status or not

2271

|=(% style="width: 129px;" %)-1016|(% style="width:366px" %)Pan-tilt controlling failed: Camera match failed|(% style="width:531px" %)Confirm the account, password and S/N whether correct and the camera device whether supports pan-tilt movement

2272

|=(% style="width: 129px;" %)1|(% style="width:366px" %)Operation success|(% style="width:531px" %)Operation success

2273

|=(% style="width: 129px;" %)201|(% style="width:366px" %)Play address created|(% style="width:531px" %)Do not open the camera frequently

2274

|=(% style="width: 129px;" %)401|(% style="width:366px" %)Unauthorized|(% style="width:531px" %)Please contact the device administrator to enable operation permission

2275

|=(% style="width: 129px;" %)403|(% style="width:366px" %)Operation prohibited|(% style="width:531px" %)Please contact the device administrator to enable operation permission

2276

|=(% style="width: 129px;" %)404|(% style="width:366px" %)Play address not obtain|(% style="width:531px" %)Confirm the device network status

2277

|=(% style="width: 129px;" %)403|(% style="width:366px" %)User does not exist|(% style="width:531px" %)Confirm the AppKey and AppSecret whether correct

2278

|=(% style="width: 129px;" %)10001|(% style="width:366px" %)Parameter error|(% style="width:531px" %)Confirm the basic information of EZVIZ Cloud whether correct

2279

|=(% style="width: 129px;" %)10002|(% style="width:366px" %)AccessToken abnormal or expire|(% style="width:531px" %)Please try to reopen the camera

2280

|=(% style="width: 129px;" %)10005|(% style="width:366px" %)AppKey abnormal|(% style="width:531px" %)AppKey is frozen, please contact with EZVIZ customer service to unfreeze

2281

|=(% style="width: 129px;" %)10017|(% style="width:366px" %)AppKey does not exist|(% style="width:531px" %)Confirm the AppKey whether correct or not

2282

|=(% style="width: 129px;" %)10030|(% style="width:366px" %)AppKey is unmatched with AppSecret|(% style="width:531px" %)Confirm the AppKey and AppSecret whether correct

2283

|=(% style="width: 129px;" %)20001|(% style="width:366px" %)Channel does not exist|(% style="width:531px" %)Confirm the camera whether re-added or channel parameter whether changed

2284

|=(% style="width: 129px;" %)20002|(% style="width:366px" %)Device does not exist|(% style="width:531px" %)Confirm the S/N whether correct

2285

|=(% style="width: 129px;" %)20006|(% style="width:366px" %)Network abnormal|(% style="width:531px" %)Confirm the device network status, try again later

2286

|=(% style="width: 129px;" %)20007|(% style="width:366px" %)Device offline|(% style="width:531px" %)Confirm the devie whether online or not

2287

|=(% style="width: 129px;" %)20008|(% style="width:366px" %)Device response timeout|(% style="width:531px" %)Operation too frequent, try again later

2288

|=(% style="width: 129px;" %)20014|(% style="width:366px" %)S/N illegal|(% style="width:531px" %)Confirm the S/N whether correct

2289

|=(% style="width: 129px;" %)20018|(% style="width:366px" %)The current user does not own the device|(% style="width:531px" %)Confirm the S/N whether correct

2290

|=(% style="width: 129px;" %)20032|(% style="width:366px" %)Channel does not exist under the current user|(% style="width:531px" %)Confirm the camera whether re-added or channel parameter whether changed

2291

|=(% style="width: 129px;" %)49999|(% style="width:366px" %)Data abnormal|(% style="width:531px" %)Please try to reopen the camera

2292

|=(% style="width: 129px;" %)60000|(% style="width:366px" %)Device does not support pan-tilt controlling|(% style="width:531px" %)Confirm the device whether supports pan-tilt controlling or not

2293

|=(% style="width: 129px;" %)60001|(% style="width:366px" %)The current user does not have the permission of pan-tilt controlling|(% style="width:531px" %)Please contact the device administrator to enable operation permission

2294

|=(% style="width: 129px;" %)60002|(% style="width:366px" %)Device tilt reaches to the upper movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation

2295

|=(% style="width: 129px;" %)60003|(% style="width:366px" %)Device tilt reaches to the lower movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation

2296

|=(% style="width: 129px;" %)60004|(% style="width:366px" %)Device pan reaches to the left movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation

2297

|=(% style="width: 129px;" %)60005|(% style="width:366px" %)Device pan reaches to the right movement limit|(% style="width:531px" %)Device control reach to limitation, do not repeat the operation

2298

|=(% style="width: 129px;" %)60006|(% style="width:366px" %)Current pan-tilt controlling operation failed|(% style="width:531px" %)Pan-tilt operation failed, try again later

2299

|=(% style="width: 129px;" %)60019|(% style="width:366px" %)Device stream is encrypted|(% style="width:531px" %)Using the EZVIZ Cloud client software to close the stream encrypted, then remote monitoring will be able to use

2300

|=(% style="width: 129px;" %)60020|(% style="width:366px" %)Unsupport this command|(% style="width:531px" %)Confirm the device whether supports this operation or not

2301

2302

(% class="wikigeneratedid" %)

2303

**Default Configuration**： Enable the default configuration, the initialization of the EZVIZ cloud camera display components will use the default configuration for binding, the screen can also be modified through the function address configuration information; do not enable the default configuration, the default initial configuration of the EZVIZ cloud camera display components are empty.

2304

2305

**In the default configuration, the following are required：**

2306

2307

**AppKey**： EZVIZ cloud application information AppKey, up to 32 characters in length, only letters and numbers can be entered, which can be obtained through the EZVIZ cloud open platform.

2308

**Secret**： EZVIZ cloud application information Secret, up to 32 characters in length, only letters and numbers can be entered, available through the EZVIZ cloud open platform.

2309

**Channel number**： EZVIZ cloud device source channel number, 1~~65535, no special modification, generally defaulted to 1, which can be obtained by viewing the EZVIZ cloud client software.

2310

2311

**S/N： **EZVIZ cloud device serial number, 0 to 80 characters in length, only letters, numbers and "-" can be entered, which can be obtained through the device information.

2312

2313

2314

**In the default configuration, the following are optional:**

2315

2316

**IP**： EZVIZ cloud device IP, which can be obtained by viewing the EZVIZ cloud client software.

2317

2318

**RTSP Port**： EZVIZ cloud device source rtsp port number, range 0~~65535, no special modification, generally default to 554, can be obtained by viewing the EZVIZ cloud client software.

2319

**Verification Code**： EZVIZ cloud device authentication code, up to 32 characters in length, obtainable through device information.

2320

2321

2322

**✎Note: **The required content in the configuration only supports remote monitoring when the camera screen can be displayed, if there is a demand for the screen side can also display the camera screen, user need to fill in the optional content in the configuration.

2323

2324

2325

=== **USB Camera** ===

**(1) General**

(% style="text-align:center" %)

2330

[[image:6.Objects_html_6d926ea40f8267c.gif||class="img-thumbnail"]]

**1) Mode select**

It is used for selecting modes; each mode uses different settings;

2335

2336

**2) Camera settings**

2337

2338

**Function address: **It occupies a word for functional operation. Different value means different operations, as below table shows:

2339

2340

(% class="table-bordered" %)

2341

|=(% style="width: 144px;" %)**Value**|=(% style="width: 700px;" %)**Operation**

2342

|(% style="width:144px" %)1|(% style="width:700px" %)Enable the screenshot function

2343

|(% style="width:144px" %)2|(% style="width:700px" %)refresh camera display object

2344

2345

**Camera state: **It shows the current camera states. It occupies a word address. Different value means different operations, as below table shows:

2346

2347

(% class="table-bordered" %)

2348

|=**Value**|=**Operation**

2349

|1|Load the camera function successfully

2350

|2|Failed to load the camera function

2351

|3|Camera does not exist

2352

|4|Camera is not running

2353

|5|Initialize the camera successfully

2354

|6|Failed to initialize the camera

2355

|7|Screenshot successfully

2356

|8|Failed to screenshot

2357

|9|Connected camera

2358

|10|Removed camera

2359

|11|The cache is full

2360

|12|The cache is abnormal

2361

2362

**3) Screenshot storage**

2363

2364

The current screenshots are only allowed on the SD card. When the SD card does not exist the system will cache the latest 10 screenshots.

2365

2366

**Picture name: **The name of the image is controlled by the address. The length of the file name is limited to 64 words. If the image name address is not set, it will be named according to the time and displayed as [YYYYMMDDHHMMSS.bmp] and screenshot format is [.bmp].

2367

2368

**4) Global screenshot**

2369

2370

If this function is enabled, camera display object can perform the screenshot operation when HMI is running and save it as a . BMP image.

2371

2372

If this function is disabled, camera display object only performs the screenshot operation when it is displayed on screen.

**5) Resolution**

The resolutions of different types of USB cameras are different, and the user can select the corresponding resolution according to the camera. When the user is unsure of the resolution of the camera, start with the smallest resolution until the image is clear.

2377

2378

**6) Use resolution size**

2379

2380

Coordinate displays the object location on the screen, and size is the length and width of the object.

**✎Note:**

* When using USB camera, HD USB camera is not recommended, which is limited by the resolution displayed by HMI itself.

2385

* When HMI is displayed horizontally, the USB camera screen displays normally. If select vertical display, USB camera can't display normally. (USB camera can only display normally when the display Angle of HMI is 0.)

2386

* One HMI is only allowed to connect with one USB camera device. There is only one USB camera display part in the whole project screen, and the camera display part is not allowed to be placed on the public screen (1002: common Windows).

2387

* Sometimes the USB camera may lose the image because of the influence in the field, then we suggest to PI9000 HMI and the recommended USB camera model.

2388

* All below USB camera model have been tested by WECON to ensure compatibility.

2389

* Currently, only PI8000 and PI9000 series support the USB camera function. Recommended USB cameras include:

2390

** REB-USB 100W07M (supports 720p)

2391

** WX152HD (supports 720p)

2392

** RMONCAM G200 (supports 720p)

2393

** ASHU S300 (640*480)

2394

2395

== **Camera control** ==

2396

2397

This is for control camera; This object need to be used with camera display object.

**Description**

(% style="text-align:center" %)

2402

[[image:6.Objects_html_92cebe892be1631e.gif||class="img-thumbnail"]]

2403

2404

**1) Use dynamic control instruction**

2405

2406

Read a string from designated system address, and then combine the instruction to control the camera image.

2407

2408

When the dynamic control command is disabled, the complete camera control command is entered in order to display the camera contents.

2409

2410

**2) Camera control instruction**

2411

2412

This is for entering static instruction for camera so that users can operate camera when HMI running.

**3) Control bit**

Trigger the switch to control the instruction.

**4) Enable beep**

The object will beep when operate.

2421

2422

== **Flow component** ==

2423

2424

The flow components are mainly used to reflect the flow state in process flow production. User could set the style of flow components according to requirements.

**Description**

(% style="text-align:center" %)

2430

[[image:6.Objects_html_d5859e3da0f0d96e.gif||class="img-thumbnail"]]

**(1) Color**

1. **FlowFrn: **It sets outer border color of flow component.

2435

1. **Block: **It sets the block color of flow component.

2436

1. **FlowBg:** It sets background color of flow component.

**(2) Detail**

1. **Pipe width:** It sets background width of flow component.

2441

1. **Block width:** It sets block width of flow component.

2442

1. **PipeFrn width: **It sets outer border width of flow component.

2443

1. **Block length: **It sets block length of flow component.

2444

1. **Transparence:** It sets transparence of flow component. (from opaque (0) to full transparence (100)). You could cooperate with transparence and other settings to meet display requirements.

2445

1. **Ratio:** It sets the display ratio of block and background (Display density of the block in flow component).

2446

1. **Speed:** It sets flow speed of the block during HMI running.

**(3) Control**

**It flows automatically by default, and the direction is from left to right, up to down.**

2451

2452

1. **Reverse:** It sets flow in reverse (default is left to right).

2453

1. **Variable:** It sets bit address to control reverse flow or not.

2454

2455

* **Set OFF: **Forward

2456

* **Set ON: **Reverse

2457

2458

(% start="3" %)

2459

1. **Address: **It sets bit address to control flow or not.

2460

2461

* **Set OFF:** Stop

2462

* **Set ON: **Flowing

**(4) Preview**

It is for preview object.

== **Printer** ==

The printing object is primarily suitable for printing out or screenshots saving when connected to micro printer.

2471

2472

Printer has two types: serial printer and USB printer. Printf (printext function) should be called when it's used to print fixed message in a script.

**Printer protocol**

HMI provides printer protocol to users as below. If users want to connect printer to HMI, protocol is necessary.

2477

2478

(% style="text-align:center" %)

2479

[[image:6.Objects_html_c453720e1c20151f.gif||class="img-thumbnail"]]

2480

2481

(% style="text-align:center" %)

2482

[[image:6.Objects_html_7c8cf5dd7d245017.gif||class="img-thumbnail"]]

**Description**

(% style="text-align:center" %)

2487

[[image:6.Objects_html_3b114c6a3e49fb0a.gif||class="img-thumbnail"]]

2488

2489

**(1) Display settings**

2490

2491

1. **Direction: **Four direction choices in printing: 0, 90, 180, and 270.

2492

1. **Zoom in: **Check "Zoom in" to zoom printing content in proportion to paper size.

**(2) Trigger mode**

1. **Trigger address: **When trigger address turns ON. The printer starts to respond operationally.

2497

1. **Printer\ Save:** It sets operation for this object, printer object could support sending printing command to printer device, and including screenshot.

**(3) Save path**

Valid when the save mode is selected, screenshot the content in printing object area, and save it in specified storage and folder, when trigger address turns ON.

2502

2503

Folder: It's available to select an SD card or USB disk. Set the file name to "Abc" in folder, and it would automatically generate a folder "Abc" when you save picture the first time, and all the pictures will save in this folder. The folder name consists of mixed uppercase and lowercase letters and numbers within 32 characters.

**Related issues**

1. The printer supports the following models:

2508

2509

* **Serial port printer: **WH-E22、WH-A6, WH-A7, WH-A9, WH-E21, WH-AA, E222R90-0DE1182TGA, SP-RMD6A, SP-RMD6B, SP-RMD8A, SP-RMD8B, SP-RMD8C, SP-DVII, SP-RME4.

2510

* **USB printer: **SP-EU80, SP-EU80N, SP-EU801SU-USB, SP-RME3UHB, SP-RME4, SP-RMD8CUH-USB.

2511

2512

(% start="2" %)

2513

1. How to use USB printer and USB disk at the same time?

2514

2515

* Plug the USB interface in the HMI into the Hub to expand the USB interface.

= **Draw** =

It provides function of drawing graphics, setting text, displaying pictures, this part contains Text, Line, Polygon, Cycle, Arc, Rectangle, Broken Line, Linear Scale, Arc scale, Table.

2520

2521

(% style="text-align:center" %)

2522

[[image:6.Objects_html_dd833ab994009b36.gif||class="img-thumbnail"]]

== **Date** ==

Date object displays local system date on the HMI screen.

2527

2528

(% style="text-align:center" %)

2529

[[image:6.Objects_html_2f5f5e3da13b2d1b.gif||class="img-thumbnail"]]

**(1) Display**

1. **Open:** It locals to [Shape] to select object background picture.

2534

1. **Default: **Click it to reset object background.

2535

1. **No Shape: **It sets transparent background for this object.

2536

1. **Font:** It locals to [Font library] to select font for text in object.

**(2) Text color**

It sets color for text in object.

**(3) Color**

Valid when select SVG picture from [Shape], user can modify SVG color according to requirements.

**(4) Data format**

It sets object display date or week, and format, detailed please refer to below table.

2549

2550

(% class="table-bordered" %)

2551

|**Classification**|**Properties**|**Display style**

2552

|(% rowspan="2" %)Format|Show date|(((

2553

YYYY/MM/DD: year/month/day

2554

2555

MM/DD/YYYY: month/day/year

2556

2557

DD/MM/YYYY: day/month/year

)))

|Show week|(((

Chinese 1

English 1

Chinese 2

English 2

)))

(% class="wikigeneratedid" %)

2570

✎**Note:** For [[animations>>url:http://docs.we-con.com.cn/wiki/pistudio/view/Helps/06.Objects/#HAmination]], see the "[[Bit Switch>>url:http://docs.we-con.com.cn/wiki/pistudio/get/Helps/06.Objects/?sheet=CKEditor.ResourceDispatcher&outputSyntax=plain&language=en&type=doc&reference=http%3A%2F%2Fdocs.we-con.com.cn%2Fwiki%2Fpistudio%2Fedit%2FHelps%2F06.Objects%2FWebHome%3Fsection%3D2]]".

== **Time** ==

Date object displays local system time on the HMI screen

2575

2576

(% style="text-align:center" %)

2577

[[image:6.Objects_html_b816c29f98f67eb9.gif||class="img-thumbnail"]]

**(1) Display**

1. **Open:** It locals to [Shape] to select object background picture.

2582

1. **Default: **Click it to reset object background.

2583

1. **No Shape: **It sets transparent background for this object.

2584

1. **Font:** It locals to [Font library] to select font for text in object.

**(2) Text color**

It sets color for text in object;

**(3) Color**

Valid when select SVG picture from [Shape], user can modify SVG color according to requirements;

== **Text** ==

It adds text to HMI screen, and an object can be displayed in 8 languages (set in "All Languages") with a special address setting.

2597

2598

(% style="text-align:center" %)

2599

[[image:6.Objects_html_3cae6153cc6e4750.gif||class="img-thumbnail"]]

2600

2601

**(1) Current state**

2602

2603

It is used to switch the object states, but [Text] object only has one state, so this function is invalid.

**(2) All language**

Because in PI HMI, all object can support text in 8 languages, so click it to open the 8 language edit window as below shows. And each language can set different font.

2608

2609

(% style="text-align:center" %)

2610

[[image:6.Objects_html_9e5568517d7a5c7c.gif||class="img-thumbnail"]]

2611

2612

**(3) From Text Library**

2613

2614

If user already setting text in "Text library", you could use text from "Text library" directly.

**(4) Windows**

It displays three languages content and provides text display setting access.

**(5) Text color**

It sets color of text in object.

2623

2624

**(6) Text background**

2625

2626

It sets object background and it only supports color.

== **Table** ==

It is displayed in a table format on the HMI screen to meet the display needs of user.

2631

2632

(% style="text-align:center" %)

2633

[[image:6.Objects_html_2aad7ef679949d71.gif||class="img-thumbnail"]]

**(1) General**

1. **Rows:** It sets rows for table.

2638

1. **Columns:** It sets columns for table.

2639

1. **Table line width:** It sets table line width, the larger the value, the thicker the line.

2640

1. **Frame line width: **It sets table frame line width, the larger the value, the thicker the line.

2641

1. **Border:** It sets table line color, including table line and frame line.

2642

1. **Transparence: **It sets the transparency of the object background.

2643

1. **Fill style: **There are two options for it, one is display background, and the other is no background.

2644

1. **Background:** Valid when selecting display background in "Fill style".

**(2) View**

It is for preview object.

== **Line** ==

It is displayed in line format in the HMI screen to meet the display needs of user.

2653

2654

(% style="text-align:center" %)

2655

[[image:6.Objects_html_795af47bf0ad8529.gif||class="img-thumbnail"]]

2656

2657

**(1) Display settings**

2658

2659

1. **Line:** It sets line color.

2660

1. **Line type:** It sets line type; it provides 9 types for user.

2661

1. **Transparence: **It sets the transparency of the object background.

2662

2663

**(2) Line width control**

2664

2665

In basic display settings, the line width can't be changed, but you could change width by address.

2666

2667

Read the numerical value of address to control the width of line. Display range of numerical value:1-10.

2668

2669

**(3) Coordinate control**

2670

2671

Dynamically set the position coordinate between two points in line. Set four addresses respectively corresponding to the starting point and end point coordinate. If the numerical value of coordinate is over interface, the object will not be displayed.

2672

2673

**(4) Color control**

2674

2675

Dynamically set the color of the line. The values of the color RGB are controlled by three addresses, and the value range from 0 to 255.

**(5) View**

It is for preview object.

== **Polygon** ==

It is displayed in polygon format in the HMI screen to meet the display needs of user.

2684

2685

Right click to close polygon and then complete the creation procedure. Select the polygon, then click its point position to change its vertex coordinate after it is created.

2686

2687

(% style="text-align:center" %)

2688

[[image:6.Objects_html_9f46a2daf3b48e68.gif||class="img-thumbnail"]]

2689

2690

**(1) Display settings**

2691

2692

1. **Border color: **It sets border line color.

2693

1. **Border type:** It sets border line type.

2694

1. **Border width: **It sets border line width.

2695

1. **Transparence: **It sets the transparency of the object background.

2696

1. **Coordinate editing:** It changes coordinate for all points in this object, as below shows.

2697

2698

(% style="text-align:center" %)

2699

[[image:6.Objects_html_52dee5d0cb5df996.gif||class="img-thumbnail"]]

2700

2701

(% start="6" %)

2702

1. **Filling pattern:** It can't be modified now.

2703

1. **Background:** It sets background color of object.

2704

2705

**(2) Transparence control**

2706

2707

Read the numerical value of address, control the transparency; value range: 0 to 100.

2708

2709

**(3) Color control**

2710

2711

Dynamically set the color of background. The values of the color RGB are controlled by three addresses, and the value range from 0 to 255.

**(4) View**

It is for preview object.

2716

2717

== **Cycle/ Ellipse** ==

2718

2719

It is displayed as cycle in HMI screen to meet the display needs of user.

**Description**

(% style="text-align:center" %)

2724

[[image:6.Objects_html_1851aaa90af6ee72.gif||class="img-thumbnail"]]

2725

2726

**1) Display settings**

2727

2728

1. **Border:** It sets border line color.

2729

1. **Frame width: **It sets border line type.

2730

1. **Frame type: **It sets border line width

2731

1. **Pattern: **It sets background type, there are four types.

2732

1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern]

2733

1. **Transparence:** It sets the transparency of the object background.

2734

2735

**2) Transparence control**

2736

2737

Read the numerical value of address, control the transparency; value range: 0 to 100.

**3) Cycle**

Check if for circle; uncheck it for ellipse.

**4) Color control**

Dynamically set the color of background. The values of the color RGB are controlled by three addresses, and the value range from 0 to 255.

**5) Move Control**

Dynamically set the position coordinate and size of circle/ellipse when HMI is running.

2750

2751

1. **X axis: **The length value moved along the X axis comes from the set address.

2752

1. **Y axis: **The length value moved along the Y axis comes from the set address.

2753

1. **Radius address: **The radius length of the circle/ellipse from the set address.

== **Arc** ==

The software uses arc drawing to specify the starting point and ending point, using a counterclockwise drawing method. The contour, start and end points of the arc can be modified on the screen. If the user wants to change the start and end points of the arc on the screen, the arc should be selected firstly.

**Description**

**(1) View**

It is for preview object.

2764

2765

**2) Display settings**

2766

2767

2768

(% style="text-align:center" %)

2769

[[image:6.Objects_html_4729b28f315a5a9b.gif||class="img-thumbnail"]]

2770

2771

1. **Border:** It sets border line color.

2772

1. **Line type: **It sets border line width.

2773

1. **Line width: **It sets border line type.

2774

1. **Fill style: **It sets background type, there are four types.

2775

1. **Transparence:** It sets the transparency of the object background.

2776

1. **Background: **It sets background color of object, invalid when select [No fill] in [Pattern].

2777

2778

**(3) Only show arc**

2779

2780

Check it for displaying arc; Uncheck it for displaying sector;

2781

2782

**(4) Transparence control**

2783

2784

Read the numerical value of address, control the transparency; value range:0-100.

2785

2786

**(5) Color control**

2787

2788

Dynamically set the color of background. The values of the color RGB are controlled by three addresses, and the value range from 0 to 255.

2789

2790

**(6) Angle control**

2791

2792

Dynamically set the shape of the arc, start angle and end angle are controlled separately by setting address.

**(7) Angle**

It displays and sets the starting and ending angles of the arc.

2797

2798

== **Broken line** ==

2799

2800

The line segments are linked end-to-end to form a broken line, whose vertex coordinate can be modified by drafting, just like polygon.

**Description**

(% style="text-align:center" %)

2805

[[image:6.Objects_html_c3b0de1d4c2fe745.gif||class="img-thumbnail"]]

2806

2807

**(1) Display settings**

2808

2809

1. **Line color: **It sets line color.

2810

1. **Line type:** It sets line type.

2811

1. **Line width: **It sets line width.

2812

1. **Transparence: **It sets the transparency of the object line.

2813

1. **Coordinate editing:** It changes coordinate for all points in this object, as below shows.

2814

2815

(% style="text-align:center" %)

2816

[[image:6.Objects_html_52dee5d0cb5df996.gif||class="img-thumbnail"]]

2817

2818

**(2) Transparence control**

2819

2820

Read the numerical value of address, control the transparency; value range:0-100.

2821

2822

**(3) Line width control**

2823

2824

In basic display settings, the line width can't be changed, but user can change width by address.

2825

2826

Read the numerical value of address to control the width of line.Display range of numerical value:1-10.

**(4) View**

It is for preview object;

2831

2832

== **Linear scale** ==

2833

2834

The linear scale is a linear scale that draws the specified area with a bisector. The specific scale of the scale can be marked with static text.

**Description**

(% style="text-align:center" %)

2839

[[image:6.Objects_html_b604bd83c8b8b6d1.gif||class="img-thumbnail"]]

2840

2841

**(1) Display settings**

2842

2843

1. **Line color:** It sets all line in object (including main and sub scale).

2844

1. **Display direction: **It provides four modes for display.

2845

1. **Main scale:**It sets the cell of the main scale.

2846

1. **Sub scale:** It sets the cell of sub scale for every main scale.

**(2) View**

It is for preview object;

== **Arc scale** ==

It displays the scale within the specified arc area. The arc scale needs to specify a center coordinate. The inner and outer circles have two concentric circles that specify the scale length and the display area. The scale is distributed counterclockwise between the start angle and the end angle.

**Description**

(% style="text-align:center" %)

2859

[[image:6.Objects_html_bd7f21c4d48f4d8a.gif||class="img-thumbnail"]]

2860

2861

**Line color: **It sets all line in object (including main and sub scale).

2862